Cast Iron Pumps – C101/C102 Series | #3149325227

Select attributes to refine your product search.

Configuration:

Displacement:

Additional Options:

Pressure Rating (psi):

Rotation:

Quantity:

Add to Quote Request List

Product Overview

Tech Specification

Product Support

Parker’s C101/C102 fixed displacement gear pumps offer high performance and high endurance due to its cast iron construction, making it an ideal selection for the Vocational & Municipal Equipment market. It is available as a standard pump with integrated valve for raising and lower dump beds, with integral relief valve.

Markets:
• Vocational & Municipal Equipment

Features/Benefits:
• Three-piece cast iron construction for distribution flexibility
• Durable high-strength cast iron body for excellent power to weight ratio
• Cast Iron construction for durability
• Balanced Thrust Plates minimize friction and leakage
• Roller bearings for durability

Applications:
• Dump Truck
• Dump Trailer

Technical Specifications:
• Flow is 27.7 gpm (104.9 lpm)
• Displacement is 6.4 cir (104.9cc/rev)
• Operating pressures up to 172 bar (2,500 psi)
• Speeds up to 2,400 rpm
• Volumetric efficiencies up to 94%
• CW, CCW, and Bi-rotational pumps available
• SAE shafts, flanges and porting
• Integrated relief valve and load hold valve
• Integrated raise/neutral/lower valve
• Air shift valve available

Configuration:

4-BOLT SQUARE

Displacement:

6.38 cu. in. / 104.5 cc

Additional Options:

Air Shift Installed

Pressure Rating (psi):

2500 PSI

Rotation:

CCW

Division:

Pump & Motor Division

Filter Included:

Maximum Operating Pressure:

2500 psi

Pump Type:

Gear

Direction of Rotation:

Clockwise | Counter Clockwise | Bi Rotational

Body Material:

CAST IRON

Shaft Type:

SAE "B" 13T

Thru-Drive Capability:

Configuration:

Single

Minimum Fluid Temperature:

0 °F

Circuit Path:

Open

Weight:

32 kg (Max)

Shaft Type:

SAE

Maximum Kinematic Viscosity:

7500 SUS

Sensor Type:

Port Location:

Rear Ports

Flow Rate:

Shaft Diameter:

7/8" diameter

Product Type:

C102

Product Type:

Hydraulic Pump Gear, Fixed Displacement

Maximum Displacement:

105 cm3/rev

Maximum Operating Pressure:

172 bar

Drain Option:

Maximum Fluid Temperature:

180 °F

Operating Pressure:

Up to 2500 psi

Weight:

70 lb (Max)

Mounting Option:

SAE | DIN

Port Type:

TAPERED THREAD

Maximum Operating Speed:

2400 RPM

Additional Options:

n/a

Radial Load Capacity:

N/A

Pump Type:

Fixed

Minimum Fluid Temperature:

-20 °C

Maximum Fluid Temperature:

80 °C

Displacement:

Up to 105 cm3/rev

Maximum Displacement:

6.4 inch3/rev

Maximum Flow Rate:

n/a

Minimum Kinematic Viscosity:

50 SUS

Port Connection:

NPT

Charge Pump Included:

Outlet Connection Size:

1" NPT/CYLINDER, 1" NPT/TANK-PLUGGED inch

Operating Pressure:

Up to 172 bar

For Fluid Type:

Standard Hydraulic Fluid / Phosphate Ester

Control Method:

Media:

N/A

Maximum Noise Level:

n/a

Energy Recovery Capability:

Inlet Connection Size:

1-1/4" NPT inch

Displacement:

Up to 6.4 inch3/rev

Seal Material:

BUNA-N, TEFLON