Air Preparation Products Filters, Regulators, Lubricators, & Airline Accessories Catalog 0700P-E aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Catalog 0700P-E Air Preparation Products Distributor Network, Warning, Offer of Sale Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics ! WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users h aving technical expertise. It is important that you analyze all aspects of your application including consequences of any failure, and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice. Offer of Sale The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated on the separate page of this document entitled “Offer of Sale”. © Copyright 2010-2005 Parker Hannifin Corporation. All Rights Reserved DISTRIBUTION NETWORK At Parker, we have the largest global distribution network in motion and control, with over 7,500 distributors serving more than 422,000 customers. To find the distributor nearest you, please visit our DISTRIBUTOR LOCATOR at http://www.parker.com/pneu/distributor ENGINEERING YOUR SUCCESS. Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics 1 Catalog 0700P-E Air Preparation Products Index Introduction A Introduction Global Air Preparation System www.parker.com/globalfrl B Global Air Preparation Systems Filters, Regulators, Lubricators www.parker.com/pneu/frl C Filters, Regulators, Lubricators Stainless Steel FRLs www.parker.com/pneu/ssfrls D Stainless Steel FRLs Precision Regulators www.parker.com/pneu/precreg E Precision Regulators Proportional Regulators (P31P, P32P & PARTM-15) F Proportional Regulators LV / EZ Lockout Valves (Lockout Valves) www.parker.com/pneu/lockout G “LV” / “EZ” Lockout Valves Integrated Fittings H Integrated Fittings Accessories www.parker.com/pneu/accessories J Accessories Ball Valves / Plug Valves www.parker.com/pneu/ball K Ball Valves / Plug Valves Quick Couplings L Quick Couplings Hose & Fittings M Hose and Fittings Tubing & Fittings N Tubing and Fittings s Safety Guide, Offer of Sale P Model to Page Number Index Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B1 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Filters, Regulators, Lubricators Global Air Preparation System Introduction…………………………………………………B2-B12 Combos……………………………………………………B14-B17 Filters……………………………………………………….B18-B23 Coalescing & Adsorber Filters……………………..B24-B29 Regulators………………………………………………..B30-B39 Filter / Regulators………………………………………B40-B45 Lubricators………………………………………………..B46-B51 Electronic Proportional Regulator………………..B52-B61 Combined Soft Start / Dump Valve………………B62-B63 Dump Valve………………………………………………B64-B65 Soft Start Valve………………………………………….B66-B67 Redundant Safety Exhaust Valve…………………B68-B71 Solenoid Operators……………………………………B72-B73 Safety Lockout Valves……………………………………….B74 Modular Ball Valves…………………………………………..B75 Manifold Blocks………………………………………………..B76 Accessories………………………………………………B77-B79 Kits…………………………………………………………..B80-B83 Section B www.parker.com/globalfrl BOLD ITEMS ARE MOST POPULAR. Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B2 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Parker Global Air Preparation Products Introduction Catalog 0700P-E Global Air Preparation System Parker Global Air Preparation System Global. Modular. Performance you need, wherever you need it. Full featured particulate and coalescing filters, regulators, filter/regulators, and lubricators are available with a wide range of standard options to meet air preparation needs. The comprehensive Global Air Preparation System is available in three body sizes with either BSPP, BSPT, or NPT to accommodate thread type requirements. Individual units can easily be assembled into various combinations, utilizing patented modular lightweight body connectors. www.parker.com/globalfrl Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B3 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Parker Global Air Preparation Products Introduction Catalog 0700P-E Global Air Preparation System • 5μ particulate, 1.0μ and 0.01μ coalescing, and adsorber available as standard • Transparent or metal bowl with manual or auto float drains standard • Available as stand alone, common port and electronic proportional • Both relieving and nonrelieving versions available • Compact design for space savings • Available with all the same standard options as the filters and regulators • Proportional oil delivery over a wide range of air flows • Fill under pressure • Compact design for space savings • Easily assembled • Many configurations available • Solenoid operated soft start, quick dump, and soft start/ quick dump valves • Manifold blocks • Shut-off valves (both slide and ball type) • Repair kits, gauges, etc. Filters Lubricators Combinations Accessories Regulators Filter / Regulators P32 Compact Series 1/4″, 3/8″ and 1/2″ 60mm body width P31 Mini Series 1/4″ ports 40mm body width P33 Standard Series 1/2″ and 3/4″ 73mm body width Comprehensive Offering Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B4 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Parker Global Air Preparation Products Introduction Catalog 0700P-E Global Air Preparation System Fast cycle times, high product quality, and low downtime all require a clean, dry pneumatic system to function properly. Parker has what it takes to make sure pneumatic systems perform at their best. As air is compressed to 7 bar (100 psig) and higher, the relative humidity quickly reaches 100% RH and air temperatures can reach between 110°C and 200°C (230°F and 392°F). For every 11°C (20°F) that the air cools after leaving the heat of the compressor, 50% of the moisture condenses into liquid into the system. The excess moisture condenses and collects in the receiver tank and distribution lines. This condensate must be removed. Bulk liquid separators remove condensed liquids after the aftercooler, receiver, or anywhere within the distribution system. Bulk liquid separators also help protect downstream filters in the system where excess cooling takes place. Particulate filters are used for the removal of solid particle contaminants down to 5 micron, as well as the removal of condensed liquids Coalescing filters are designed to remove water and oil aerosols (not vapor) and particulate from air streams down to 0.01 micron in size. Note: Water and oil, in vapor form, pass through general purpose particulate filters. This type of filter should be used as a prefilter for the coalescing (oil removal) filter. Installed in pairs, Particulate and Coalescing filters ensure a continuous supply of high quality air. Key Particulate Oil Water Oil Vapor Water Vapor Together we can power your application with clean, dry air Clean, dry pneumatic systems with Parker Global Air Preparation Stage 1 2 3 4 5 Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B5 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Parker Global Air Preparation Products Introduction Catalog 0700P-E Global Air Preparation System Refrigeration and desiccant dryers lower the air’s dew point by removing water vapor, providing appropriately dry air for the downstream application. Hydrocarbon and oil vapors are removed using filters utilizing activated carbon. Airborne hydrocarbons are often left over from the compressor oils. Stages Function Air Compressor Bulk Liquid Removal Particulate Filtration Coalescing Filtration Air Dryers Hydrocarbon Removal Application All pneumatic systems Basic pneumatic systems Basic pneumatic systems Systems requiring highest quality air. Systems requiring air with reduced moisture content Systems requiring highest quality air for critical applications Description Air leaving the compressor room at 93ºC (200ºF) releases 95% of its moisture into the piping system when it cools to 38ºC (100ºF) Removes bulk liquid contamination and protects filters where excess cooling takes place in the distribution piping Removes solid particulates down to 5 micron, and the separation of bulk contaminants. Removes liquid aerosols and submicron particulates (not vapor) down to 0.01 micron. Removes water vapor from air stream. Dew point reduced down to 4ºC (40ºF) (refrigeration) or -40ºC (-40ºF) (desiccant). Removal of odors and trace vapors for critical applications. Parker Global Air Preparation Solution Customer supplied P3TF Bulk Liquid Separator P31, P32, P33 Particulate Filter P31, P32, P33 Coalescing Filter PDRD Refrigeration Dryer P3TJ Regenerative Desiccant Dryer P31, P32, P33 Activated Carbon (Adsorber) Filter 6 7 Clean Dry Air 1 2 3 4 5 6 7 Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B6 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Parker Global Air Preparation Products Introduction Catalog 0700P-E Global Air Preparation System A completely modular air preparation system Easy to adjust nonrising knob with snap-lock, preventing accidental change of set pressure Filter / Ball Valve Regulator Pressure gauge Quick release bayonet-type integral bowl and bowl guard assembly Padlock slide Bowl guard with multiple viewing slots Manual drain with pipe-away, auto drain available Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B7 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Parker Global Air Preparation Products Introduction Catalog 0700P-E Global Air Preparation System Aluminum body NPT, BSPP or BSPT porting available 2-piece Patented modular body connector US Patent number 5,383,689 Soft Start / Dump Valve Coalescing Filter Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B8 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Parker Global Air Preparation Products Introduction Catalog 0700P-E Global Air Preparation System P33 Standard Series Air Preparation P31 Mini Series P32 Compact Series 40mm body width 1/4″ Ported Flows up to: dm3/s (SCFM) Filter 12 (25) Coalescer 2 (4.2) Regulator 30 (64) Filter/Regulator 14 (30) Lubricator 13 (28) Features: • Space saving integral gauge • Manifold style regulators available • OSHA compliant shut-off valves • Soft-Start & Quick Dump valves • Electronic Proportional Regulator 60mm body width 1/4″, 3/8″, & 1/2″ Ported Flows up to: dm3/s (SCFM) Filter 38 (80) Coalescer 11 (23) Regulator 67 (142) Filter/Regulator 64 (136) Lubricator 47 (100) Features: • Manifold style regulators available • OSHA Compliant shut-off valves • Soft-Start & Quick Dump valves • Electronic Proportional Regulator 73mm body width 1/2″ & 3/4″ Ported Flows up to: dm3/s (SCFM) Filter 48 (102) Coalescer 20 (42) Regulator 100 (212) Filter/Regulator 98 (208) Lubricator 68 (144) Features: • OSHA Compliant shut-off valves • Soft-Start & Quick Dump valves (Utilizes P32 size only) • Electronic proportional regulator (Utilizes P32 size only) Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B9 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Parker Global Air Preparation Products Introduction Catalog 0700P-E Global Air Preparation System Isys Micro The P31 Mini Series FRL’s and accessories are well matched for use with these Parker valves and actuators. The P32 Series FRL’s & accessories are well matched for use with these Parker valves and actuators. The P33 Series FRL’s & accessories are well matched for use with these Parker valves and actuators. Mini Series Complimentary Products Compact Series Complimentary Products Standard Series Complimentary Products Isys HA / HB Isys Size 1 Isys HA / HB Isys Micro P1D P1D P1D P1A Valves and Actuators Moduflex Size 1 OSP-P OSP-P OSP-P Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B10 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Parker Global Air Preparation Products Introduction Catalog 0700P-E Global Air Preparation System Complete Pneumatic System • Multiple output pressures (P2, P3, P4, etc.) with common inlet (P1) • Available in two sizes P31 and P32 • Balanced valve design for accurate pressure regulation • Outlet pressure ports in front and rear of unit. • Four spring ranges available • Electro-Pneumatic regulator • Integrated systems control • Accurate output pressure • Micro parameter settings • Selectable I/O parameters • Quick, full flow exhaust • LED display indicates output pressure • No air consumption in steady state • Multiple mounting options • Protection to IP65 P1 P1 P2 P3 P4 P31P Mini Series P32P Compact Series RCeogmumlaotonr Psort Manifold Electronic Proportional Regulator Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B11 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Parker Global Air Preparation Products Introduction Catalog 0700P-E Global Air Preparation System FRL to Valve: The chart below contains recommendations for the correct selection of Global Air Preparation units to suit the number and size of valves in a typical application. Actuator to FRL: The chart below contains recommendations for the correct selection of Global Air Preparation units suitable for each cylinder size.If you have a tube length over 2 m, choose one tube size larger than the chart. The table is based on a Maximum cylinder speed of 0.5m/s P31 Mini Series P32 Compact Series P33 Standard Series Number of valves that would actuate at once 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Moduflex 1 Isys Micro HB / Viking Xtreme Moduflex 2 HA / Global ISO See Larger Parker FRL Offering Cyl Ø mm Cyl Ø inches Cylinder bore size 5 (5/16) 10 (7/16) 16 (9/16) 20 (3/4) 25 (1) 28 (1-1/8) 32 (1-1/4) 40 (1-1/2) 45 (1-3/4) 50 (2) 63 (2-1/2) 75 (3) 80 (3-1/4) 100 (4) Tube Ø mm Tube Ø inches Tube diameter external 4 (5/32) 4 (5/32) 4 (5/32) 6 (1/4) 6 (1/4) 6 (1/4) 6 (1/4) 8 (5/16) 8 (5/16) 8 (5/16) 10 (3/8) 10 (3/8) 12 (1/2) 12 (1/2) 1 2 3 4 5 6 7 8 9 10 P31 Mini Series P32 Compact Series P33 Standard Series See Larger Parker FRL Offering Number of cylinders actuating at once Note: Data listed above is simply a guideline for a typical application only. Proper sizing and correct flow requirements must be taken into account. Application Guide Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B12 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Catalog 0700P-E Global Air Preparation System Product Selection Chart Basic Unit Series Port Size Bowls Elements (Micron) Adsorber Page 1/4 3/8 1/2 3/4 Poly with Bowl Guard Metal without SG Metal SG 0.01 1 5 F I L T E R S P31 X — — — X X — — — Std. — B18 P32 X X X — X X X — — Std. — B20 P33 — — X X X X X — — Std. — B22 C O A L E S C I N G F I L T E R S P31 X — — — X X — Std. Std. — Std. B24 P32 X X X — X X X Std. Std. — Std. B26 P33 — — X X X X X Std. Std. — Std. B28 Basic Unit Series Port Size Adjustment Range Page 1/4 3/8 1/2 3/4 30 psig 2 bar 60 psig 4 bar 125 psig 8 bar 250 psig 17 bar R E G U L A T O R S S T A N D A R D P31 X — — — Std. Std. Std. — B30 P32 X X X — Std. Std. Std. Std. B34 P33 — — X X Std. Std. Std. Std. B38 C O M M O N P I L O T P31 X — — — Std. Std. Std. — B32 P32 X X X — Std. Std. Std. Std. B36 Basic Unit Series Port Size Bowls Elements (Micron) Adjustment Range Page 1/4 3/8 1/2 3/4 Poly with Bowl Guard Metal without SG Metal SG 5 15 25 30 60 F I L T E R R E G U L A T O R P31 X — — — X X — Std. Opt. — Opt. Opt. B40 P32 X X X — X X X Std. — — Opt. Std. B42 P33 — — X X X X X Std. — — Opt. Opt. B44 L U B R I C A T O R S P31 X X — — X — X Can be filled under pressure B46 P32 X X X — X — X Can be filled under pressure B48 P33 — — X X X — X Can be filled under pressure B50 Parker Global Air Preparation Products Product Selection Chart Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B13 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Catalog 0700P-E Global Air Preparation System Parker Global Air Preparation Products Notes Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B14 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Catalog 0700P-E Global Air Preparation System P31 Series Combinations Popular Combinations Filter + Regulator + Lubricator Combinations + Poly bowl 5 micron element, 8 bar (116 psig) Regulator + Gauge and Wall Mounting Brackets Inlet pressure 10 bar (145 psig), Secondary pressure 6.3 bar (91.3 psig), 1 bar (14.5 psig) pressure drop. Filter/Regulator + Lubricator Combinations + Poly bowl 5 micron element, 8 bar (116 psig) Regulator + Gauge and Wall Mounting Brackets Inlet pressure 10 bar (145 psig), Secondary pressure 6.3 bar (91.3 psig), 1 bar (14.5 psig) pressure drop. P 3 1 Element 5μ Element E 0.01μ Element C 1μ Element 9 Adsorber A Drain type Manual drain M Pulse drain B Lub type Oil mist standard sight dome L Drain type No drain; closed end N Mounting No bracket A Port blocks C* Port blocks & wall brkt D* Wall bracket W Filter coding (use with combo codes: B F G). For multiple filters, repeat as needed Regulator coding (use with combo code: B) Lubricator coding (use with combo codes: A B) Assembly configuration Filter / Regulator coding (use with codes: A M) Port size Flow dm3/s (scfm) Manual drain Weight Pulse drain Weight 1/4″ 13 27 P31CB92GEMN5LNW 0.46 kg (1.01 lbs) P31CB92GEBN5LNW 0.46 kg (1.01 lbs) Port size Flow dm3/s (scfm) Manual drain Weight Pulse drain Weight 1/4″ 14 28 P31CA92GEMN5LNW 0.35 kg (0.77 lbs) P31CA92GEBN5LNW 0.35kg (0.77 lbs) * For 3/8” Port Blocks please order separately. See Kits section. Note: All bowl types are the same for each component Example: If a “G” is specified for a F+L, both units would get a poly bowl with bowl guard. Combination B/V + Combination Q Combination + B/V X Combination C Bowl type Poly bowl with bowl guard G Metal bowl without sight gauge M Thread type BSPP 1 BSPT 2 NPT 9 Port size 1/4 2 Combination type* F/R+L A F+Fc+Fa G F+R+L B F/R+Fc M F+Fc F F+Fc1+Fc Q * Combination type F = 5μ Fc1 = 1μ Fc = .01μ Fa = Adsorber Relief / Adjustment Non-rising knob N Adjustment range With round gauge 2 bar; 30 psig; 0.2 MPa Z 4 bar; 60 psig; 0.4 MPa M 8 bar; 125 psig; 0.8 MPa G 17 bar; 250 psig; 1.7 MPa J§ Without gauge With square gauge 2 bar; 30 psig; 0.2 MPa Y psig bar 4 bar; 60 psig; 0.4 MPa L 30* = 1 2* = V 8 bar; 125 psig; 0.8 MPa N 60 = 3 4 = S 17 bar; 250 psig; 1.7 MPa H§ 125 = 5 8 = T * Unit comes with 0-4 bar or 0-60 psig gauge respectively. § Not available with poly bowl with bowl guard. Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B15 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Catalog 0700P-E Global Air Preparation System P32 Series Combinations Popular Combinations P 3 2 Element 0.01μ Element C 0.01μ Element D* with dpi 5μ Element E 5μ Element F* with dpi 1μ Element 9 1μ Element Q* with dpi Adsorber A Drain type Auto drain A Manual drain M Filter coding (use with combo codes: B F G). For multiple filters, repeat as needed Regulator coding (use with combo code: B) Lubricator coding (use with combo codes: A B) Assembly configuration Filter / Regulator coding (use with codes: A M) * Not available when using lubricator. Note: All bowl types are the same for each component. Example: If a “G” is specified for a F+L, both units would get a poly bowl with bowl guard. Port size Flow dm3/s (scfm) Manual drain Weight Auto drain Weight 1/4″ 20 42 P32CB92GEMNGLNW 1.29 kg (2.84 lbs) P32CB92GEANGLNW 1.29 kg (2.84 lbs) 3/8″ 32 68 P32CB93GEMNGLNW 1.29 kg (2.84 lbs) P32CB93GEANGLNW 1.29 kg (2.84 lbs) 1/2″ 40 85 P32CB94GEMNGLNW 1.29 kg (2.84 lbs) P32CB94GEANGLNW 1.29 kg (2.84 lbs) Port size Flow dm3/s (scfm) Manual drain Weight Auto drain Weight 1/4″ 22 45 P32CA92GEMNGLNW 1.03 kg (2.27 lbs) P32CA92GEANGLNW 1.03 kg (2.27 lbs) 3/8″ 33 70 P32CA93GEMNGLNW 1.03 kg (2.27 lbs) P32CA93GEANGLNW 1.03 kg (2.27 lbs) 1/2″ 43 90 P32CA94GEMNGLNW 1.03 kg (2.27 lbs) P32CA94GEANGLNW 1.03 kg (2.27 lbs) Bowl type Poly bowl with bowl guard G Metal bowl without sight gauge M Metal bowl with sight gauge S Thread type BSPP 1 BSPT 2 NPT 9 Port size 1/4 2 3/8 3 1/2 4 Filter + Regulator + Lubricator Combinations + Poly bowl 5 micron element, 8 bar (116 psig) Regulator + Gauge and Wall Mounting Brackets Inlet pressure 10 bar (145 psig), Secondary pressure 6.3 bar (91.3 psig), 1 bar (14.5 psig) pressure drop. Filter/Regulator + Lubricator Combinations + Poly bowl 5 micron element, 8 bar (116 psig) Regulator + Gauge and Wall Mounting Brackets Inlet pressure 10 bar (145 psig), Secondary pressure 6.3 bar (91.3 psig), 1 bar (14.5 psig) pressure drop. * Not available with F/R. Lub type Oil mist standard sight dome L Drain type No drain; closed end N Mounting No bracket A Port blocks C Port blocks & wall brkt D Wall bracket W Relief / Adjustment Non-rising knob relieving N Combination B/V + Combination Q Combination + B/V X Combination C Combination type* F/R+L A F+Fc+Fa G F+R+L B F/R+Fc M F+Fc F F+Fc1+Fc Q * Combination type F = 5μ Fc1 = 1μ Fc = .01μ Fa = Adsorber Adjustment range With round gauge 2 bar; 30 psig; 0.2 MPa Z 4 bar; 60 psig; 0.4 MPa M 8 bar; 125 psig; 0.8 MPa G 17 bar; 250 psig; 1.7 MPa J§ Without gauge With square gauge 2 bar; 30 psig; 0.2 MPa Y psig bar 4 bar; 60 psig; 0.4 MPa L 30* = 1 2* = V 8 bar; 125 psig; 0.8 MPa N 60 = 3 4 = S 17 bar; 250 psig; 1.7 MPa H§ 125 = 5 8 = T * Unit comes with 0-4 bar or 0-60 psig gauge respectively. § Not available with poly bowl with bowl guard. Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B16 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Catalog 0700P-E Global Air Preparation System P33 Series Combinations Popular Combinations P 3 3 Filter coding (use with combo codes: B F G). For multiple filters, repeat as needed Regulator coding (use with combo code: B) Lubricator coding (use with combo codes: A B) Assembly configuration Filter / Regulator coding (use with codes: A M) Combination B/V + Combination Q Combination + B/V X Combination C Thread type BSPP 1 BSPT 2 NPT 9 Port size 1/2 4 3/4 6 Filter + Regulator + Lubricator Combinations + Poly bowl 5 micron element, 8 bar (116 psig) Regulator + Gauge and Wall Mounting Brackets Inlet pressure 10 bar (145 psig), Secondary pressure 6.3 bar (91.3 psig), 1 bar (14.5 psig) pressure drop. Filter/Regulator + Lubricator Combinations + Poly bowl 5 micron element, 8 bar (116 psig) Regulator + Gauge and Wall Mounting Brackets Inlet pressure 10 bar (145 psig), Secondary pressure 6.3 bar (91.3 psig), 1 bar (14.5 psig) pressure drop. Combination type* F/R+L A F+Fc+Fa G F+R+L B F/R+Fc M F+Fc F F+Fc1+Fc Q * Combination type F = 5μ Fc1 = 1μ Fc = .01μ Fa = Adsorber * Not available when using lubricator. Note: All bowl types are the same for each component. Example: If a “G” is specified for a F+L, both units would get a poly bowl with bowl guard. Bowl type Poly bowl with bowl guard G Metal bowl without sight gauge M* Metal bowl with sight gauge S Element 0.01μ Element C 0.01μ Element D* with dpi 5μ Element E 5μ Element F* with dpi 1μ Element 9 1μ Element Q* with dpi Adsorber A Drain type Auto drain A Manual drain M Adjustment range With round gauge 2 bar; 30 psig; 0.2 MPa Z 4 bar; 60 psig; 0.4 MPa M 8 bar; 125 psig; 0.8 MPa G 17 bar; 250 psig; 1.7 MPa J* Without gauge 2 bar; 30 psig; 0.2 MPa Y 4 bar; 60 psig; 0.4 MPa L 8 bar; 125 psig; 0.8 MPa N 17 bar; 250 psig; 1.7 MPa H* * Not available with poly bowl with bowl guard. * Not available with F/R. Port size Flow dm3/s (scfm) Manual drain Weight Auto drain Weight 1/2″ 43 90 P33CB94GEMNGLNW 1.84 kg (4.06 lbs) P33CB94GEANGLNW 1.84 kg (4.06 lbs) 3/4″ 52 110 P33CB96GEMNGLNW 1.84 kg (4.06 lbs) P33CB96GEANGLNW 1.84 kg (4.06 lbs) Port size Flow dm3/s (scfm) Manual drain Weight Auto drain Weight 1/2″ 52 110 P33CA94GEMNGLNW 1.51 kg (3.33 lbs) P33CA94GEANGLNW 1.51 kg (3.33 lbs) 3/4″ 71 150 P33CA96GEMNGLNW 1.51 kg (3.33 lbs) P33CA96GEANGLNW 1.51 kg (3.33 lbs) Lub type Oil mist standard sight dome L Drain type No drain; closed end N Relief / Adjustment Non-rising knob relieving N Mounting No bracket A Port blocks C Port blocks & wall brkt D Wall bracket W Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B17 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Catalog 0700P-E Global Air Preparation System P31, P32 & P33 Series Combination Dimensions Popular Combination Dimensions P31C P32C P33C 4mm (5/32″) I.D. Tube Barb tting 35 (1.38) 35 (1.38) 120 (4.72) 40 (1.57) 39.7 40 (1.56) (1.57) 159.7 (6.29) 33 (1.30) Bowl removal clearance 81 (3.19) Square Gauge 96 (3.78) Round Gauge 47.1 (1.85) 100 (3.94) 58 (2.28) 50 (1.97) Bowl removal clearance. (Manual and Auto Drain.) 129 (5.08) 64.5 (2.54) 98.1 (3.86) Square Gauge 110.1 (4.33) Round Gauge 261.6 (10.30) 198 (7.80) 69 (2.72) 64.5 (2.54) 100 (3.94) 50 (1.97) Bowl removal clearance. (Manual and Auto Drain.) 58 (2.28) 229.3 (9.03) 4mm (5/32) I.D. tube barb tting 47.1 (1.85) 98.1 (3.86) Square Gauge 110.1 (4.33) Round Gauge 77.5 (3.05) 155 (6.10) 120 (4.72) 47.1 (1.85) 100 (3.94) 50 (1.97) 4.8 mm (.19) I.D. Tube Barb tting Bowl removal clearance. (Manual and Auto Drain.) 291 (11.44) 51 (2.00) 82 (3.23) 77.5 (3.05) 237 (9.33) 238 (9.37) 100 (3.94) 50 (1.97) 51 (2.00) 4.8 mm (.19) I.D. Tube Barb tting Bowl removal clearance. (Manual and Auto Drain.) 120 (4.72) 47.1 (1.85) mm (inches) 4mm (5/32″) I.D. Tube Barb tting Bowl Removal Clearance 40 (1.57) 33.3 (1.31) 35 (1.38) 35 (1.38) 176.9 (6.96) 80 (3.15) 39.7 (1.56) 81 (3.19) Square Gauge 96 (3.78) Round Gauge Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B18 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Catalog 0700P-E Global Air Preparation System P31 Series Mini Particulate Filters Mini Particulate Filter – P31 Options: Symbols • Integral 1/4″ ports (NPT, BSPP & BSPT) • High efficiency 5 micron element as standard • Excellent water removal efficiency • Robust but lightweight aluminum construction • One hand operation for easy element cartridge removal • Positive bayonet latch to ensure correct & safe fitting 1 2 1 2 Manual drain Auto drain Port size Description Order code† Flow‡ dm3/s (scfm) Max. bar (psig) Height mm (inches) Width mm (inches) Depth mm (inches) 1/4″ Poly bowl – manual drain P31FA92EGMN 12 (25) 10 (150) 116.3 (4.58) 40 (1.58) 42.7 (1.68) 1/4″ Poly bowl – pulse drain P31FA92EGBN 12 (25) 10 (150) 116.3 (4.58) 40 (1.58) 42.7 (1.68) 1/4″ Metal bowl – manual drain P31FA92EMMN 12 (25) 17 (250) 116.3 (4.58) 40 (1.58) 42.7 (1.68) 1/4″ Metal bowl – pulse drain P31FA92EMBN 12 (25) 17 (250) 116.3 (4.58) 40 (1.58) 42.7 (1.68) † Standard part numbers shown in bold. For other models refer to Options chart above. ‡ Flow with 6.3 bar (91.3 psig) inlet pressure and 0.34 (4.9 psig) pressure drop. Thread type BSPP 1 BSPT 2 NPT 9 Engr level Current A Mounting N No bracket Port size 1/4 2 Element 5μ Element E Drain type M Manual drain B Pulse drain Bowl type G Poly bowl with bowl guard M Metal bowl without sight gauge Basic series Global modular mini particulate filter P31F P31F A 9 2 E G M N Bold items are most common. Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B19 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Catalog 0700P-E Global Air Preparation System P31 Series Mini Particulate Filters Pressure Drop – bar Pressure Drop – (psig) 0 2 4 6 5 3 1 7 0 0 0 5 10 15 20 Flow – dm3/s Flow – (scfm) 10 20 30 40 0.1 0.2 0.3 0.4 0.5 1.6 23.2 Primary Pressure – bar Primary Pressure – psig 4.0 58 6.3 91.4 10 145 Specifications Flow capacity* 1/4 12 dm3/s (25 scfm) Operating Plastic bowl -10°C to 52°C (14°F to 125°F) temperature Metal bowl -10°C to 65.5°C (14°F to 150°F) Max. supply Plastic bowl 10 bar (150 psig) pressure Metal bowl 17 bar (250 psig) Standard filtration 5 micron Useful retention† 12 cm3 (0.4 US oz.) Port size BSPP / BSPT / NPT 1/4 Weight 0.11 kg (0.24 lbs) * Inlet pressure 6.3 bar (91.3 psig). Pressure drop 0.34 bar (4.9 psig). † Useful retention refers to volume below the quiet zone baffle. Air quality: Within ISO 8573-1: 1991 Class 3 (Particulates) Within ISO 8573-1: 2001 Class 6 (Particulates) Material Specifications Body Aluminum Body cap ABS Bowl Polycarbonate Bowl guard Nylon Element retainer Acetal Baffle Acetal Filter element Sintered polyethylene Seals Nitrile Dimensions mm (inches) Flow Charts Repair and Service Kits Plastic bowl / Bowl guard manual drain P31KA00BGM Metal bowl / w/o sight gauge manual drain P31KA00BMM Plastic bowl / Bowl guard pulse drain P31KA00BGB Metal bowl / w/o sight gauge pulse drain P31KA00BMB 5μ particle filter element P31KA00ESE C-bracket (fits to body) P31KA00MW T-bracket with body connector P31KA00MT Body connector P31KA00CB 1/4 Filter 40 (1.58) 20 (.79) 40 (1.58) 21.4 (.84) 124.8 (4.91) 33 (1.30) 4mm (5/32) I.D. tube barb fitting Bowl removal clearance Manual Drain Pulse Drain Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B20 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Catalog 0700P-E Global Air Preparation System P32 Series Compact Particulate Filters Compact Particulate Filter – P32 Symbols Port size Description Order code† Flow‡ dm3/s (scfm) Max. bar (psig) Height mm (inches) Width mm (inches) Depth mm (inches) 1/4″ Poly bowl – manual drain P32FA92EGMN 18 (38) 10 (150) 188 (7.4) 60 (2.36) 60 (2.36) 1/4″ Poly bowl – auto drain P32FA92EGAN 18 (38) 10 (150) 182 (7.2) 60 (2.36) 60 (2.36) 1/4″ Metal bowl – manual drain P32FA92ESMN 18 (38) 17 (250) 188 (7.4) 60 (2.36) 60 (2.36) 1/4″ Metal bowl – auto drain P32FA92ESAN 18 (38) 17 (250) 182 (7.2) 60 (2.36) 60 (2.36) 3/8″ Poly bowl – manual drain P32FA93EGMN 30 (64) 10 (150) 188 (7.4) 60 (2.36) 60 (2.36) 3/8″ Poly bowl – auto drain P32FA93EGAN 30 (64) 10 (150) 182 (7.2) 60 (2.36) 60 (2.36) 3/8″ Metal bowl – manual drain P32FA93ESMN 30 (64) 17 (250) 188 (7.4) 60 (2.36) 60 (2.36) 3/8″ Metal bowl – auto drain P32FA93ESAN 30 (64) 17 (250) 182 (7.2) 60 (2.36) 60 (2.36) 1/2″ Poly bowl – manual drain P32FA94EGMN 38 (80) 10 (150) 188 (7.4) 60 (2.36) 60 (2.36) 1/2″ Poly bowl – auto drain P32FA94EGAN 38 (80) 10 (150) 182 (7.2) 60 (2.36) 60 (2.36) 1/2″ Metal bowl – manual drain P32FA94ESMN 38 (80) 17 (250) 188 (7.4) 60 (2.36) 60 (2.36) 1/2″ Metal bowl – auto drain P32FA94ESAN 38 (80) 17 (250) 182 (7.2) 60 (2.36) 60 (2.36) • Integral 1/4″, 3/8″ or 1/2″ ports (NPT, BSPP & BSPT) • High efficiency 5 micron element as standard • Excellent water removal efficiency • Robust but lightweight aluminum construction • Positive bayonet latch to ensure correct & safe fitting † Standard part numbers shown in bold. For other models refer to Options chart above. ‡ Flow with 6.3 bar (91.3 psig) inlet pressure and 0.34 (4.9 psig) pressure drop. 1 2 1 2 Manual drain Auto drain Options: Thread type BSPP 1 BSPT 2 NPT 9 Mounting N No bracket Port size 1/4 2 3/8 3 1/2 4 Element 5μ Element E Drain type M Manual drain A Auto drain Bowl type G Poly bowl with bowl guard M Metal bowl without sight gauge S Metal bowl with sight gauge Basic series Global modular compact particulate filter P32F Bold items are most common. Engr level Current A P32F A 9 2 E G M N Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B21 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Catalog 0700P-E Global Air Preparation System P32 Series Compact Particulate Filters Pressure Drop – bar Pressure Drop – (psig) 0 2 4 6 5 3 1 7 0 1.6 23.2 Primary Pressure – bar Primary Pressure – psig 4.0 58 6.3 91.4 10 145 0 0 10 20 30 Flow – dm3/s Flow – (scfm) 10 20 30 40 50 60 0.1 0.2 0.3 0.4 0.5 0 0 10 20 30 40 50 Flow – dm3/s Flow – (scfm) 20 40 60 80 100 Pressure Drop – bar Pressure Drop – (psig) 0 2 4 6 5 3 1 7 0 0.1 0.2 0.3 0.4 0.5 1.6 23.2 Primary Pressure – bar Primary Pressure – psig 4.0 58 6.3 91.4 10 145 0 0 10 20 30 40 50 60 Flow – dm3/s Flow – (scfm) 20 40 60 80 100 120 Pressure Drop – bar Pressure Drop – (psig) 0 2 4 6 5 3 1 7 0 0.1 0.2 0.3 0.4 0.5 1.6 23.2 Primary Pressure – bar Primary Pressure – psig 4.0 58 6.3 91.4 10 145 Specifications Flow Charts Flow capacity* 1/4 18 dm3/s (38 scfm) 3/8 30 dm3/s (64 scfm) 1/2 38 dm3/s (80 scfm) Operating Plastic bowl -25°C to 52°C (-13°F to 125°F) temperature Metal bowl -25°C to 65.5°C (-13°F to 150°F) Max. supply Plastic bowl 10 bar (150 psig) pressure Metal bowl 17 bar (250 psig) Standard filtration 5 micron Useful retention† 51 cm3 (1.7 US oz.) Port size BSPP / BSPT / NPT 1/4, 3/8, 1/2 Weight 0.28 kg (0.62 lbs) * Inlet pressure 6.3 bar (91.3 psig). Pressure drop 0.34 bar (4.9 psig). † Useful retention refers to volume below the quiet zone baffle. Air quality: Within ISO 8573-1: 1991 Class 3 (Particulates) Within ISO 8573-1: 2001 Class 6 (Particulates) Material Specifications Body Aluminum Body cap ABS Bowls Plastic bowl Polycarbonate Metal bowl Aluminum Bowl guard Nylon Deflector Polypropylene Element retainer / Baffle Acetal Filter element Sintered polyethylene Seals Nitrile Sight gauge Metal bowl Polycarbonate Repair and Service Kits Plastic bowl / Bowl guard manual drain P32KA00BGM Metal bowl / Sight gauge manual drain P32KA00BSM Auto drain P32KA00DA 5μ particle filter element P32KA00ESE L-bracket (fits to body) P32KA00ML T-bracket (fits to body connector) P32KA00MB T-bracket with body connector P32KA00MT Body connector P32KA00CB Differential pressure indicator (replacement) P32KA00RQ 1/4 Filter 3/8 Filter 1/2 Filter Dimensions mm (inches) 60 (2.36) 60 (2.36) 26.3 (1.04) 190.3 (7.49) 30 (1.18) 58 (2.28) 4mm (5/32) I.D. tube barb fitting Bowl removal clearance Manual Drain Automatic Drain Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B22 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Catalog 0700P-E Global Air Preparation System P33 Series Standard Particulate Filters Standard Particulate Filter – P33 Symbols Port size Description Order code† Flow‡ dm3/s (scfm) Max. bar (psig) Height mm (inches) Width mm (inches) Depth mm (inches) 1/2″ Poly bowl – manual drain P33FA94EGMN 40 (85) 10 (150) 213 (8.4) 73 (2.9) 73 (2.9) 1/2″ Poly bowl – auto drain P33FA94EGAN 40 (85) 10 (150) 207 (8.2) 73 (2.9) 73 (2.9) 1/2″ Metal bowl – manual drain P33FA94ESMN 40 (85) 17 (250) 213 (8.4) 73 (2.9) 73 (2.9) 1/2″ Metal bowl – auto drain P33FA94ESAN 40 (85) 17 (250) 207 (8.2) 73 (2.9) 73 (2.9) 3/4″ Poly bowl – manual drain P33FA96EGMN 48 (102) 10 (150) 213 (8.4) 73 (2.9) 73 (2.9) 3/4″ Poly bowl – auto drain P33FA96EGAN 48 (102) 10 (150) 207 (8.2) 73 (2.9) 73 (2.9) 3/4″ Metal bowl – manual drain P33FA96ESMN 48 (102) 17 (250) 213 (8.4) 73 (2.9) 73 (2.9) 3/4″ Metal bowl – auto drain P33FA96ESAN 48 (102) 17 (250) 207 (8.2) 73 (2.9) 73 (2.9) • Integral 1/2″ or 3/4″ ports (NPT, BSPP & BSPT) • High efficiency 5 micron element as standard • Excellent water removal efficiency • Robust but lightweight aluminum construction • Positive bayonet latch to ensure correct & safe fitting † Standard part numbers shown in bold. For other models refer to Options chart above. ‡ Flow with 6.3 bar (91.3 psig) inlet pressure and 0.34 (4.9 psig) pressure drop. 1 2 1 2 Manual drain Auto drain Options: Thread type BSPP 1 BSPT 2 NPT 9 Mounting N No bracket Port size 1/2 4 3/4 6 Element 5μ Element E Drain type M Manual drain A Auto drain Bowl type G Poly bowl with bowl guard M Metal bowl without sight gauge S Metal bowl with sight gauge Basic series Global modular standard particulate filter P33F Bold items are most common. Engr level Current A P33F A 9 2 E G M N Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B23 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Catalog 0700P-E Global Air Preparation System P33 Series Standard Particulate Filters Pressure Drop – bar Pressure Drop – (psig) 0 2 4 6 5 3 1 7 0 1.6 23.2 Primary Pressure – bar Primary Pressure – psig 4.0 58 6.3 91.4 10 145 0 0 10 20 30 40 50 60 70 Flow – dm3/s Flow – (scfm) 20 40 60 80 100 120 140 0.1 0.2 0.3 0.4 0.5 Pressure Drop – bar Pressure Drop – (psig) 0 2 4 6 5 3 1 7 0 1.6 23.2 Primary Pressure – bar Primary Pressure – psig 4.0 58 6.3 91.4 10 145 0 0 10 20 30 40 50 60 70 80 Flow – dm3/s Flow – (scfm) 20 40 60 80 100 120 140 160 0.1 0.2 0.3 0.4 0.5 Specifications Flow Charts Flow capacity* 1/2 40 dm3/s (85 scfm) 3/4 48 dm3/s (102 scfm) Operating Plastic bowl -25°C to 52°C (-13°F to 125°F) temperature Metal bowl -25°C to 65.5°C (-13°F to 150°F) Max. supply Plastic bowl 10 bar (150 psig) pressure Metal bowl 17 bar (250 psig) Standard filtration 5 micron Useful retention† 85 cm3 (2.8 US oz.) Port size BSPP / BSPT / NPT 1/2, 3/4 Weight 0.46 kg (1.01 lbs) * Inlet pressure 6.3 bar (91.3 psig). Pressure drop 0.34 bar (4.9 psig). † Useful retention refers to volume below the quiet zone baffle. Air quality: Within ISO 8573-1: 1991 Class 3 (Particulates) Within ISO 8573-1: 2001 Class 6 (Particulates) Material Specifications Body Aluminum Body cap ABS Bowls Plastic bowl Polycarbonate Metal bowl Aluminum Bowl guard Nylon Deflector Polypropylene Element retainer / Baffle Acetal Filter element Sintered polyethylene Seals Nitrile Sight gauge Metal bowl Polycarbonate Repair and Service Kits Plastic bowl / Bowl guard manual drain P33KA00BGM Metal bowl / Sight gauge manual drain P33KA00BSM Auto drain P32KA00DA 5μ particle filter element P33KA00ESE L-bracket (fits to body) P33KA00ML T-bracket (fits to body connector) P32KA00MB T-bracket with body connector P33KA00MT Body connector P32KA00CB Differential pressure indicator (replacement) P32KA00RQ 3/4 Filter 1/2 Filter 73 (2.87) 26 (1.02) 73 (2.87) 36 (1.42) 213 (8.39) 4mm (5/32) I.D. tube barb fitting Use 10mm or 3/8” Flex Tubing 51 (2.00) Bowl removal clearance (Manual & Auto Drain) Manual Drain Automatic Drain Dimensions mm (inches) Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B24 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Catalog 0700P-E Global Air Preparation System P31 Series Mini Coalescing & Adsorber Filters Mini Coalescing and Adsorber Filters – P31 • Integral 1/4″ ports (NPT, BSPP & BSPT) • Removes liquid aerosols and sub micron particles • Oil free air for critical applications, such as air gauging, pneumatic instrumentation and control • Positive bayonet latch to ensure correct & safe fitting • Adsorbing activated carbon element removes oil vapors and most hydrocarbons Port size Description Order code† Flow‡ dm3/s (scfm) Max. bar (psig) Height mm (inches) Width mm (inches) Depth mm (inches) 1/4″ Poly bowl – 0.01 micron – manual drain P31FA92DGMN 2 (4.2) 10 (150) 116.3 (4.58) 40 (1.58) 42.7 (1.68) 1/4′ Poly bowl – 0.01 micron – pulse drain P31FA92DGBN 2 (4.2) 10 (150) 116.3 (4.58) 40 (1.58) 42.7 (1.68) 1/4″ Metal bowl – 0.01 micron – manual drain P31FA92DMMN 2 (4.2) 17 (250) 116.3 (4.58) 40 (1.58) 42.7 (1.68) 1/4′ Metal bowl – 0.01 micron – pulse drain P31FA92DMBN 2 (4.2) 17 (250) 116.3 (4.58) 40 (1.58) 42.7 (1.68) Note: To optimize the life of coalescing element, it is advisable to install a P31F pre-filter with a 5 micron element upstream of the coalescing filter. To optimize the life of an Adsorber it is advisable to install a P31 Coalescing Filter upstream of the Adsorber. Adsorber element should be replaced approximately every 1000 hours of service. † Standard part numbers shown in bold. For other models refer to Options chart above. ‡ Flow with 6.3 bar (91.3 psig) inlet pressure and 0.2 (3 psig) pressure drop. Symbol Options: Basic series Global modular mini coalescing filter P31F Thread type BSPP 1 BSPT 2 NPT 9 Mounting N No bracket Element 0.01μ Element C 0.01μ Element with DPI D 1μ Element 9 1μ Element with DPI Q Adsorber A Bowl type G Poly bowl with bowl guard M Metal bowl without sight gauge Port size 1/4 2 Bold items are most common. Drain type B Pulse drain) M Manual drain Engr level Current A P31F A 9 2 C G M N Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B25 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Catalog 0700P-E Global Air Preparation System P31 Series Mini Coalescing & Adsorber Filters Specifications Flow capacity dm3/s scfm 1.0 micron coalescing Energy efficient flow* 3.8 (8) Maximum flow** 6 (13) 0.01 micron coalescing Energy efficient flow* 2 (4.2) Maximum flow** 3.8 (8) Activated carbon adsorber Rated flow* 6 (13) Operating Plastic bowl -10°C to 52°C (14°F to 125°F) temperature Metal bowl -10°C to 65.5°C (14°F to 150°F) Max. supply Plastic bowl 10 bar (150 psig) pressure Metal bowl 17 bar (250 psig) Standard filtration 1.0 and 0.01 micron Adsorber Max. oil carryover (ppm w/w) 0.003 @ 21OC (70OF) Useful retention† 12 cm3 (0.4 US oz.) Port size BSPP / BSPT / NPT 1/4 Weight 0.11 kg (0.24 lbs) * Inlet pressure 6.3 bar (91.3 psig), Pressure drop 0.2 bar (3 psig), Saturated Element. ** Inlet pressure 6.3 bar (91.3 psig), Pressure drop 0.4 bar (6 psig), Saturated Element. † Useful retention refers to volume below the quiet zone baffle. Material Specifications Body Aluminum Body cap ABS Bowl Plastic bowl Polycarbonate Metal bowl Aluminum Filter element 1.0 and .01 micron Borosilicate cloth Adsorber Activated carbon Seals Nitrile Flow Charts Repair and Service Kits Plastic bowl / Bowl guard manual drain P31KA00BGM Metal bowl / w/o sight gauge manual drain P31KA00BMM Plastic bowl / Bowl guard pulse drain P31KA00BGB Metal bowl / w/o sight gauge pulse drain P31KA00BMB 1μ coalescing filter element P31KA00ES9 0.01μ coalescing filter element P31KA00ESC Activated carbon adsorber filter element P31KA00ESA C-bracket (fits to body) P31KA00MW T-bracket with body connector P31KA00MT Body connector P31KA00CB Saturated Element Flow Pressure Drop – bar Pressure Drop – (psig) 0 2 4 6 5 3 1 7 0 2.0 29 Primary Pressure – bar Primary Pressure – psig 4.0 58 6.3 91.4 0 0 1 2 3 4 5 6 7 8 Flow – dm3/s Flow – (scfm) 5 10 15 0.1 0.2 0.3 0.4 0.5 P31 – 1.0 micron flow P31 – 0.01 micron flow Dimensions mm (inches) Pressure Drop – bar Pressure Drop – (psig) 0 2 4 6 5 3 1 7 0 0 0 1 2 3 4 5 Flow – dm3/s Flow – (scfm) 5 10 0.1 0.2 0.3 0.4 0.5 2.0 29 Primary Pressure – bar Primary Pressure – psig 4.0 58 6.3 91.4 Saturated Element Flow 40 (1.58) 20 (.79) 40 (1.58) 21.4 (.84) 124.8 (4.91) 33 (1.30) 4mm (5/32) I.D. tube barb fitting Bowl removal clearance Manual Drain Pulse Drain Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B26 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Catalog 0700P-E Global Air Preparation System P32 Series Compact Coalescing & Adsorber Filters Compact Coalescing and Adsorber Filter – P32 Port size Description Order code† Flow‡ dm3/s (scfm) Max. bar (psig) Height mm (inches) Width mm (inches) Depth mm (inches) 1/4″ Poly bowl – 0.01 micron, manual drain P32FA92DGMN 11 (23) 10 (150) 209 (8.2) 60 (2.36) 60 (2.36) 1/4″ Poly bowl – 0.01 micron, auto drain P32FA92DGAN 11 (23) 10 (150) 203 (8.0) 60 (2.36) 60 (2.36) 1/4″ Metal bowl – 0.01 micron, manual drain P32FA92DSMN 11 (23) 17 (250) 209 (8.2) 60 (2.36) 60 (2.36) 1/4″ Metal bowl – 0.01 micron, auto drain P32FA92DSAN 11 (23) 17 (250) 203 (8.0) 60 (2.36) 60 (2.36) 3/8″ Poly bowl – 0.01 micron, manual drain P32FA93DGMN 11 (23) 10 (150) 209 (8.2) 60 (2.36) 60 (2.36) 3/8″ Poly bowl – 0.01 micron, auto drain P32FA93DGAN 11 (23) 10 (150) 203 (8.0) 60 (2.36) 60 (2.36) 3/8″ Metal bowl – 0.01 micron, manual drain P32FA93DSMN 11 (23) 17 (250) 209 (8.2) 60 (2.36) 60 (2.36) 3/8′ Metal bowl – 0.01 micron, auto drain P32FA93DSAN 11 (23) 17 (250) 203 (8.0) 60 (2.36) 60 (2.36) 1/2″ Poly bowl – 0.01 micron, manual drain P32FA94DGMN 11 (23) 10 (150) 209 (8.2) 60 (2.36) 60 (2.36) 1/2″ Poly bowl – 0.01 micron, auto drain P32FA94DGAN 11 (23) 10 (150) 203 (8.0) 60 (2.36) 60 (2.36) 1/2″ Metal bowl – 0.01 micron, manual drain P32FA94DSMN 11 (23) 17 (250) 209 (8.2) 60 (2.36) 60 (2.36) 1/2″ Metal bowl – 0.01 micron, auto drain P32FA94DSAN 11 (23) 17 (250) 203 (8.0) 60 (2.36) 60 (2.36) • Integral 1/4″, 3/8″ or 1/2″ ports (NPT, BSPP & BSPT) • Removes liquid aerosols and sub micron particles • Oil free air for critical applications, such as air gauging, pneumatic instrumentation and control • Differential Pressure Indicator (DPI) standard on Coalescing Filters • Positive bayonet latch to ensure correct & safe fitting • Adsorbing activated carbon element removes oil vapors and most hydrocarbons † Standard part numbers shown in bold. For other models refer to Options chart above. ‡ Flow with 6.3 bar (91.3 psig) inlet pressure and 0.2 (3 psig) pressure drop. Note: To optimize the life of coalescing element, it is advisable to install a P32F pre-filter with a 5 micron element upstream of the coalescing filter. To optimize the life of an Adsorber it is advisable to install a P32 Coalescing Filter upstream of the Adsorber. Adsorber element should be replaced approximately every 1000 hours of service. Symbol Options: Basic series Global modular compact coalescing filter P32F Thread type BSPP 1 BSPT 2 NPT 9 Mounting N No bracket Bowl type G Poly bowl with bowl guard M Metal bowl without sight gauge S Metal bowl with sight gauge Port size 1/4 2 3/8 3 1/2 4 Bold items are most common. Drain type M Manual drain A Auto drain (P32, P33) Element 0.01μ Element C 0.01μ Element with DPI D 1μ Element 9 1μ Element with DPI Q Adsorber A Engr level Current A P32F A 9 2 C G M N Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B27 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Catalog 0700P-E Global Air Preparation System P32 Series Compact Coalescing & Adsorber Filters Flow Charts Material Specifications Body Aluminum Body cap ABS Bowls Plastic bowl Polycarbonate Metal bowl Aluminum Filter element 1.0 and .01 micron Borosilicate cloth Adsorber Activated carbon Seals Nitrile Sight gauge Metal bowl Polycarbonate Repair and Service Kits Plastic bowl / Bowl guard manual drain P32KA00BGM Metal bowl / Sight gauge manual drain P32KA00BSM Auto drain P32KA00DA 1μ coalescing filter element P32KA00ES9 0.01μ coalescing filter element P32KA00ESC Activated carbon adsorber filter element P32KA00ESA L-bracket (fits to body) P32KA00ML T-bracket (fits to body connector) P32KA00MB T-bracket with body connector P32KA00MT Body connector P32KA00CB Differential pressure indicator (replacement) P32KA00RQ Saturated Element Flow Pressure Drop – bar Pressure Drop – (psig) 0 2 4 6 5 3 1 7 0 2.0 29 Primary Pressure – bar Primary Pressure – psig 4.0 58 6.3 91.4 0 0 5 10 15 20 25 30 35 Flow – dm3/s Flow – (scfm) 10 20 30 40 50 60 70 0.1 0.2 0.3 0.4 0.5 Saturated Element Flow Pressure Drop – bar Pressure Drop – (psig) 0 2 4 6 5 3 1 7 0 2.0 29 Primary Pressure – bar Primary Pressure – psig 4.0 58 6.3 91.4 0 0 5 10 15 20 25 Flow – dm3/s Flow – (scfm) 10 20 30 40 50 0.1 0.2 0.3 0.4 0.5 P32 – 1.0 micron flow P32 – 0.01 micron flow Specifications Flow capacity dm3/s scfm 1.0 micron coalescing Energy efficient flow* 17 (36) Maximum flow** 27 (57) 0.01 micron coalescing Energy efficient flow* 11 (23) Maximum flow** 28 (38) Activated carbon adsorber Rated flow* 27 (57) Operating Plastic bowl -25°C to 52°C (-13°F to 125°F) temperature Metal bowl -25°C to 65.5°C (-13°F to 150°F) Max. supply Plastic bowl 10 bar (150 psig)§ pressure Metal bowl 10 bar (150 psig)§ Standard filtration 1.0 and 0.01 micron Adsorber Max. oil carryover (ppm w/w) 0.003 @ 21OC (70OF) Useful retention† 51 cm3 (1.7 US oz.) Port size BSPP / BSPT / NPT 1/4, 3/8, 1/2 Weight 0.32 kg (0.71 lbs) * Inlet pressure 6.3 bar (91.3 psig), Pressure drop 0.2 bar (3 psig), Saturated Element. ** Inlet pressure 6.3 bar (91.3 psig), Pressure drop 0.4 bar (6 psig), Saturated Element. † Useful retention refers to volume below the quiet zone baffle. § Without pressure indicator (DPI) – max. supply pressure for metal bowl version is 17 bar (250 psig). Dimensions mm (inches) 60 (2.36) 60 (2.36) 48.3 (1.90) 206.3 (8.12) 30 (1.18) 58 (2.28) 4mm (5/32) I.D. tube barb fitting Bowl removal clearance Manual Drain Automatic Drain (Revised 09-16-13) Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B28 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Catalog 0700P-E Global Air Preparation System P33 Series Standard Coalescing & Adsorber Filters Standard Coalescing and Adsorber Filter – P33 Port size Description Order code† Flow‡ dm3/s (scfm) Max. bar (psig) Height mm (inches) Width mm (inches) Depth mm (inches) 1/2″ Poly bowl – 0.01 micron, manual drain P33FA94DGMN 20 (42) 10 (150) 235 (9.3) 73 (2.9) 73 (2.9) 1/2″ Poly bowl – 0.01 micron, auto drain P33FA94DGAN 20 (42) 10 (150) 229 (9.0) 73 (2.9) 73 (2.9) 1/2″ Metal bowl – 0.01 micron, manual drain P33FA94DSMN 20 (42) 17 (250) 235 (9.3) 73 (2.9) 73 (2.9) 1/2″ Metal bowl – 0.01 micron, auto drain P33FA94DSAN 20 (42) 17 (250) 229 (9.0) 73 (2.9) 73 (2.9) 3/4″ Poly bowl – 0.01 micron, manual drain P33FA96DGMN 20 (42) 10 (150) 235 (9.3) 73 (2.9) 73 (2.9) 3/4″ Poly bowl – 0.01 micron, auto drain P33FA96DGAN 20 (42) 10 (150) 229 (9.0) 73 (2.9) 73 (2.9) 3/4″ Metal bowl – 0.01 micron, manual drain P33FA96DSMN 20 (42) 17 (250) 235 (9.3) 73 (2.9) 73 (2.9) 3/4″ Metal bowl – 0.01 micron, auto drain P33FA96DSAN 20 (42) 17 (250) 229 (9.0) 73 (2.9) 73 (2.9) • Integral 1/2″ or 3/4″ ports (NPT, BSPP & BSPT) • Removes liquid aerosols and sub micron particles • Oil free air for critical applications, such as air gauging, pneumatic instrumentation and control • Differential Pressure Indicator (DPI) standard on Coalescing Filters • Positive bayonet latch to ensure correct & safe fitting • Adsorbing activated carbon element removes oil vapors and most hydrocarbons † Standard part numbers shown in bold. For other models refer to Options chart above. ‡ Flow with 6.3 bar (91.3 psig) inlet pressure and 0.2 (3 psig) pressure drop. Note: To optimize the life of coalescing element, it is advisable to install a P33F pre-filter with a 5 micron element upstream of the coalescing filter. To optimize the life of an Adsorber it is advisable to install a P33 Coalescing Filter upstream of the Adsorber. Adsorber element should be replaced approximately every 1000 hours of service. Symbol Options: Basic series Global modular standard coalescing filter P33F Thread type BSPP 1 BSPT 2 NPT 9 Mounting N No bracket Bowl type G Poly bowl with bowl guard M Metal bowl without sight gauge S Metal bowl with sight gauge Port size 1/2 4 3/4 6 Bold items are most common. Drain type M Manual drain A Auto drain Element 0.01μ Element C 0.01μ Element with DPI D 1μ Element 9 1μ Element with DPI Q Adsorber A Engr level Current A P33F A 9 2 C G M N Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B29 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Catalog 0700P-E Global Air Preparation System P33 Series Standard Coalescing & Adsorber Filters Specifications Flow Charts Flow capacity dm3/s scfm 1.0 micron coalescing Energy efficient elow* 32 (68) Maximum flow** 44 (93) 0.01 micron coalescing Energy efficient fow* 20 (42) Maximum flow** 34 (72) Activated carbon adsorber Rated flow* 44 (93) Operating Plastic bowl -25°C to 52°C (-13°F to 125°F) temperature Metal bowl -25°C to 65.5°C (-13°F to 150°F) Max. supply Plastic bowl 10 bar (150 psig)§ pressure Metal bowl 10 bar (150 psig)§ Standard filtration 1.0 and 0.01 micron Adsorber Max. oil carryover (ppm w/w) 0.003 @ 21OC (70OF) Useful retention† 85 cm3 (2.8 US oz.) Port size BSPP / BSPT / NPT 1/2, 3/4 Weight 0.50 kg (1.10 lbs) * Inlet pressure 6.3 bar (91.3 psig), Pressure drop 0.2 bar (3 psig), Saturated Element. ** Inlet pressure 6.3 bar (91.3 psig), Pressure drop 0.4 bar (6 psig), Saturated Element. † Useful retention refers to volume below the quiet zone baffle. § Without pressure indicator (DPI) – max. supply pressure for metal bowl version is 17 bar (250 psig). Material Specifications Body Aluminum Body cap ABS Bowls Plastic bowl Polycarbonate Metal bowl Aluminum Filter element 1.0 and .01 micron Borosilicate cloth Adsorber Activated carbon Seals Nitrile Sight gauge Metal bowl Polycarbonate Repair and Service Kits Plastic bowl / Bowl guard manual drain P33KA00BGM Metal bowl / Sight gauge manual drain P33KA00BSM Auto drain P32KA00DA 1μ coalescing filter element P33KA00ES9 0.01μ coalescing filter element P33KA00ESC Activated carbon adsorber filter element P33KA00ESA L-bracket (fits to body) P33KA00ML T-bracket (fits to body connector) P32KA00MB T-bracket with body connector P32KA00MT Body connector P32KA00CB Differential pressure indicator (replacement) P32KA00RQ Saturated Element Flow Pressure Drop – bar Pressure Drop – (psig) 0 2 4 6 5 3 1 7 0 2.0 29 Primary Pressure – bar Primary Pressure – psig 4.0 58 6.3 91.4 0.1 0.2 0.3 0.4 0.5 0 0 10 20 30 40 50 Flow – dm3/s Flow – (scfm) 20 40 60 80 100 Saturated Element Flow Pressure Drop – bar Pressure Drop – (psig) 0 2 4 6 5 3 1 7 0 2.0 29 Primary Pressure – bar Primary Pressure – psig 4.0 58 6.3 91.4 0.1 0.2 0.3 0.4 0.5 Flow – dm3/s Flow – (scfm) 0 0 10 20 30 40 20 40 60 80 P33 – 1.0 micron flow P33 – 0.01 micron flow Manual Drain Automatic Drain 73 (2.87) DPI 26 (1.02) 73 (2.87) 36 (1.42) 213 (8.39) 4mm (5/32) I.D. tube barb fitting Use 10mm or 3/8” Flex Tubing 51 (2.00) Bowl removal clearance (Manual & Auto Drain) Dimensions mm (inches) (Revised 09-16-13) Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B30 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Catalog 0700P-E Global Air Preparation System P31 Series Mini Regulator Mini Regulator – P31 Symbols • Integral 1/4″ ports (NPT, BSPP & BSPT) • Robust but lightweight aluminum construction • Secondary pressure ranges 0-2 bar (0-30 psig), 0-4 bar, (0-60 psig), 0-8 bar (0-125 psig), 0-17 bar (0-250 psig) • Secondary aspiration plus balanced poppet provides quick response and accurate pressure regulation. • Relieving & Non-relieving types • Non-rising knob Self relieving regulator with gauge Non relieving regulator 1 2 1 3 2 † Standard part numbers shown in bold. For other models refer to Options chart above. ‡ Flow with 10 bar (145 psig) inlet pressure, 6.3 bar (91.3) psig) set pressure and 1 bar (14.5 psig) pressure drop. Port size Description Order code† Flow‡ dm3/s (scfm) Max. bar (psig) Height mm (inches) Width mm (inches) Depth mm (inches) 1/4″ 8 bar (125 psig) relieving P31RA92BNNP 30 (64) 20 (300) 100.1 (3.94) 40 (1.58) 40 (1.58) 1/4″ 8 bar (125 psig) + gauge P31RA92BN5P 30 (64) 20 (300) 100.1 (3.94) 40 (1.58) 64.3 (2.53) Options: Basic series Global modular mini regulator P31R Thread type BSPP 1 BSPT 2 NPT 9 Mounting P Plastic panel mount nut Relief Relieving B Non-relieving N Reverse flow-relieving R Port size 1/4 2 Adjustment range With square gauge With round gauge psig bar Z 2 bar; 30 psig; 0.2 MPa 1 = 30* V = 2* M 4 bar; 60 psig; 0.4 MPa 3 = 60 S = 4 G 8 bar; 125 psig; 0.8 MPa 5 = 125 T = 8 J§ 17 bar; 250 psig; 1.7 MPa Without gauge Y 2 bar; 30 psig; 0.2 MPa L 4 bar; 60 psig; 0.4 MPa N 8 bar; 125 psig; 0.8 MPa H§ 17 bar; 250 psig; 1.7 MPa * Unit comes with 0-4 bar or 0-60 psig gauge respectively. § Not available with poly bowl with bowl guard. Bold items are most common. Engr level Current A P31R A 9 2 B N N P Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B31 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Catalog 0700P-E Global Air Preparation System P31 Series Mini Regulator NOTE: 31.7 mm (1.25 in.) hole required for panel nut mounting. Specifications Flow capacity* 1/4 30 dm3/s (64 scfm) Operating temperature† -20°C to 65.5°C (-4°F to 150°F) Max. supply pressure 20 bar (300 psig) Adjusting range pressure 0-2 bar (30 psig) 0-4 bar (60 psig) 0-8 bar (125 psig) 0-17 bar (250 psig) Port size BSPP / BSPT / NPT 1/4 Gauge port (2 ea.)** BSPP / BSPT / NPT 1/8 Weight 0.17 kg (0.37 lbs) * Inlet pressure 10 bar (145 psig). Secondary pressure 6.3 bar (91.3 psig). ** Non-gauge option only. † Units with square gauges: -15°C to 65.5°C (5°F to 150°F) Material Specifications Body Aluminum Adjustment knob Acetal Body cap ABS Bonnet PBT Diaphragm assembly Brass / Nitrile Bottom plug 33% glass-filled nylon Valve assembly Brass / Nitrile Springs Steel Seals Nitrile Panel nut Acetal CAUTION: REGULATOR PRESSURE ADJUSTMENT – The working range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting devices may be obtained only by special design. For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting. WARNING Product rupture can cause serious injury. Do not connect regulator to bottled gas. Do not exceed Maximum primary pressure rating. ! Flow Charts Repair and Service Kits Regulator repair kit – relieving P31KA00RB Regulator repair kit – non-relieving P31KA00RC Panel mount nut – aluminum P31KA00MM Panel mount nut – plastic P31KA00MP Angle bracket (uses panel mount threads) P31KA00MR C-bracket (fits to body) P31KA00MW T-bracket with body connector P31KA00MT Body connector P31KA00CB Gauges Square flush mount gauge Square with adapter kit 0-4 bar K4511SCR04B 0-10 bar K4511SCR11B 0-60 psig K4511SCR060 0-150 psig K4511SCR150 0-4 bar P6G-PR11040 0-10 bar P6G-PR11100 0-60 psig P6G-PR11P06 0-150 psig P6G-PR11P15 1/4 Regulator Inlet Pressure – 10 bar (145 psig) Secondary Pressure – bar Secondary Pressure – (psig) 0 20 40 60 80 100 120 140 2.5 bar 36.3 psig 8.0 bar 116 psig 4.0 bar 58 psig 6.3 bar 91.4 psig 0 2 3 4 5 6 7 8 9 10 1 0 0 5 10 15 20 25 30 35 40 Flow – dm3/s Flow – (scfm) 10 20 30 40 50 60 70 80 1.00″ Round 1/8″ center back mount 40mm Round 1/8″ center back mount (Not for use with Common Port Regulators) 0-60 psig / 0-4 bar K4510N18060 0-160 psig / 0-11 bar K4510N18160 0-30 psig / 0-2 bar K4515N18030 0-60 psig / 0-4 bar K4515N18060 0-160 psig / 0-11 bar K4515N18160 For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting. Dimensions mm (inches) 30.6 (1.20) 56.8 (2.24) 40 (1.58) 40 (1.58) 61.3 (2.41) 20 (.79) Square Gauge 76.3 (3.00) Round Gauge 104.1 (4.10) Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B32 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Catalog 0700P-E Global Air Preparation System P31 Series Mini Common Regulator Mini Common – P1 Regulator – P31 Symbols • Manifold style regulator with line pressure on both sides. • Pressure output is at front or rear. • Integral 1/4″ ports (NPT, BSPP & BSPT) • Robust construction • Secondary pressure ranges 0-2 bar (0-30 psig), 0-4 bar, (0-60 psig), 0-8 bar (0-125 psig), 0-17 bar (0-250 psig) • Secondary aspiration plus balanced poppet provides quick response and accurate pressure regulation • Relieving & Non-relieving types • Non-rising knob Self relieving regulator with gauge Non relieving regulator 1 2 1 3 2 Port size Description Order code† Flow‡ dm3/s (scfm) Max. bar (psig) Height mm (inches) Width mm (inches) Depth mm (inches) 1/4″ 8 bar (125 psig) relieving P31HA92BNNP 18 (38) 20 (300) 100.1 (3.94) 40 (1.58) 40 (1.58) P2 P2 P2 P2 P1 P1 P1 P2 P2 P2 P2 † Standard part numbers shown in bold. For other models refer to Options chart above. ‡ Flow with 10 bar (145 psig) inlet pressure, 6.3 bar (91.3) psig) set pressure and 1 bar (14.5 psig) pressure drop. Options: Basic series Global modular mini common regulator P31H Thread type BSPP 1 BSPT 2 NPT 9 Mounting P Plastic panel mount nut Relief Relieving B Non-relieving N Port size 1/4 2 Adjustment range With square gauge With round gauge psig bar Z 2 bar; 30 psig; 0.2 MPa 1 = 30* V = 2* M 4 bar; 60 psig; 0.4 MPa 3 = 60 S = 4 G 8 bar; 125 psig; 0.8 MPa 5 = 125 T = 8 J§ 17 bar; 250 psig; 1.7 MPa Without gauge Y 2 bar; 30 psig; 0.2 MPa L 4 bar; 60 psig; 0.4 MPa N 8 bar; 125 psig; 0.8 MPa H§ 17 bar; 250 psig; 1.7 MPa * Unit comes with 0-4 bar or 0-60 psig gauge respectively. § Not available with poly bowl with bowl Bold items are most common. guard. Engr level Current A P31H A 9 2 B N N P Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B33 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Catalog 0700P-E Global Air Preparation System P31 Series Mini Common Regulator NOTE: 31.7 mm (1.25 in.) hole required for panel nut mounting. Specifications Flow capacity* 1/4 18 dm3/s (38 scfm) Operating temperature -20°C to 65.5°C (-4°F to 150°F) Max. supply pressure 20 bar (300 psig) Adjusting range pressure 0-2 bar (30 psig) 0-4 bar (60 psig) 0-8 bar (125 psig) 0-17 bar (250 psig) P1 Port size (Inlet / Outlet) BSPP / BSPT / NPT 1/4 P2 Regulated ports (2 ea.) BSPP / BSPT / NPT 1/8 Weight 0.30 kg (0.66 lbs) * Inlet pressure 10 bar (145 psig). Secondary pressure 6.3 bar (91.3 psig). Materials of Construction Body Zinc Adjustment knob Acetal Body cap ABS Bonnet 33% Glass-filled PBT Diaphragm assembly Brass / Nitrile Bottom plug 33% Glass-filled nylon Valve assembly Brass / Nitrile Flow Charts 1/4 Common Regulator Inlet Pressure – 10 bar (145 psig) 2.5 bar 36.3 psig 8.0 bar 116 psig 4.0 bar 58 psig 6.3 bar 91.4 psig Secondary Pressure – bar Secondary Pressure – (psig) 0 20 40 60 80 100 0 2 3 4 5 6 7 1 0 0 5 10 15 20 25 30 35 40 Flow – dm3/s Flow – (scfm) 10 20 30 40 50 60 70 80 Repair and Service Kits Regulator repair kit – relieving P31KA00RB Regulator repair kit – non-relieving P31KA00RC Panel mount nut – aluminum P31KA00MM Panel mount nut – plastic P31KA00MP Angle bracket (uses panel mount threads) P31KA00MR T-bracket with body connector P31KA00MT Body connector P31KA00CB WARNING Product rupture can cause serious injury. Do not connect regulator to bottled gas. Do not exceed Maximum primary pressure rating. ! CAUTION: REGULATOR PRESSURE ADJUSTMENT – The working range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting devices may be obtained only by special design. For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting. Gauges 1.00″ Round 1/8″ center back mount 0-60 psig / 0-4 bar K4510N18060 0-160 psig / 0-11 bar K4510N18160 For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting. Dimensions mm (inches) Square with adapter kit 0-4 bar P6G-PR11040 0-10 bar P6G-PR11100 0-60 psig P6G-PR11P06 0-150 psig P6G-PR11P15 104.1 (4.10) 30.6 (1.20) 56.8 (2.24) 40 (1.58) 40 (1.58) 20 (.79) Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B34 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Catalog 0700P-E Global Air Preparation System P32 Series Compact Regulator Compact Regulator – P32 Symbols Self relieving regulator with gauge Non relieving regulator 1 2 1 3 2 • Integral 1/4″, 3/8″ or 1/2″ ports (NPT, BSPP & BSPT) • Robust but lightweight aluminum construction • Secondary pressure ranges 0-2 bar (0-30 psig), 0-4 bar, (0-60 psig), 0-8 bar (0-125 psig), 0-17 bar (0-250 psig) • Secondary aspiration plus balanced poppet provides quick response and accurate pressure regulation • Relieving & Non-relieving types • Non-rising knob † Standard part numbers shown in bold. For other models refer to Options chart above. ‡ Flow with 10 bar (145 psig) inlet pressure, 6.3 bar (91.3) psig) set pressure and 1 bar (14.5 psig) pressure drop. WARNING Product rupture can cause serious injury. Do not connect regulator to bottled gas. Do not exceed Maximum primary pressure rating. ! CAUTION: REGULATOR PRESSURE ADJUSTMENT – The working range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting devices may be obtained only by special design. For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting. Port size Description Order code† Flow‡ dm3/s (scfm) Max. bar (psig) Height mm (inches) Width mm (inches) Depth mm (inches) 1/4″ 8 bar (125 psig) relieving P32RA92BNNP 41 (81) 20 (300) 136 (5.4) 60 (2.36) 60 (2.36) 1/4″ 8 bar (125 psig) relieving + gauge P32RA92BNGP 41 (81) 20 (300) 136 (5.4) 60 (2.36) 60 (2.36) 3/8″ 8 bar (125 psig) relieving P32RA93BNNP 65 (138) 20 (300) 136 (5.4) 60 (2.36) 60 (2.36) 3/8″ 8 bar (125 psig) relieving + gauge P32RA93BNGP 65 (138) 20 (300) 136 (5.4) 60 (2.36) 60 (2.36) 1/2″ 8 bar (125 psig) relieving P32RA94BNNP 67 (142) 20 (300) 136 (5.4) 60 (2.36) 60 (2.36) 1/2″ 8 bar (125 psig) relieving + gauge P32RA94BNGP 67 (142) 20 (300) 136 (5.4) 60 (2.36) 60 (2.36) Options: Basic series Global modular compact regulator P32R Thread type BSPP 1 BSPT 2 NPT 9 Mounting P Plastic panel mount nut Relief Relieving B Non-relieving N Reverse flow-relieving R Port size 1/4 2 3/8 3 1/2 4 Adjustment range With square gauge With round gauge psig bar Z 2 bar; 30 psig; 0.2 MPa 1 = 30* V = 2* M 4 bar; 60 psig; 0.4 MPa 3 = 60 S = 4 G 8 bar; 125 psig; 0.8 MPa 5 = 125 T = 8 J§ 17 bar; 250 psig; 1.7 MPa Without gauge Y 2 bar; 30 psig; 0.2 MPa L 4 bar; 60 psig; 0.4 MPa N 8 bar; 125 psig; 0.8 MPa H§ 17 bar; 250 psig; 1.7 MPa * Unit comes with 0-4 bar or 0-60 psig gauge respectively. § Not available with poly bowl with bowl Bold items are most common. guard. Engr level Current A P32R A 9 2 B N N P Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B35 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Catalog 0700P-E Global Air Preparation System P32 Series Compact Regulator Specifications Flow Charts Flow capacity* 1/4 41 dm3/s (81 scfm) 3/8 65 dm3/s (138 scfm) 1/2 67 dm3/s (142 scfm) Operating temperature -25°C to 65.5°C (-13°F to 150°F) Max. supply pressure 20 bar (300 psig) Adjusting range pressure 0-2 bar (30 psig) 0-4 bar (60 psig) 0-8 bar (125 psig) 0-17 bar (250 psig) Port size BSPP / BSPT / NPT 1/4, 3/8, 1/2 Gauge port (2 ea.) BSPP / BSPT / NPT 1/4 Weight 0.41 kg (0.90 lbs) * Inlet pressure 10 bar (145 psig). Secondary pressure 6.3 bar (91.3 psig). Material Specifications Body Aluminum Adjustment knob Acetal Body cap ABS Bonnet 33% Glass-filled nylon Diaphragm assembly Nitrile / Zinc Bottom plug 33% Glass-filled nylon Valve assembly Brass / Nitrile Springs Main regulating valve Steel S.S. Seals Nitrile Panel nut Acetal Repair and Service Kits Regulator repair kit – relieving P32KA00RB Regulator repair kit – non-relieving P32KA00RC Panel mount nut – aluminum P32KA00MM Panel mount nut – plastic P32KA00MP Angle bracket (uses panel mount threads) P32KA00MR T-bracket with body connector P32KA00MT T-bracket P32KA00MB Body connector P32KA00CB NOTE: 51 mm (2.00 in.) hole required for panel nut mounting. Dimensions mm (inches) 60 60 (2.36) (2.36) 38.5 (1.52) 136.1 (5.36) 30 (1.18) 73.8 (2.91) 81 (3.19) Square Gauge 93 (3.66) Round Gauge Inlet Pressure – 10 bar (145 psig) Secondary Pressure – bar Secondary Pressure – (psig) 0 20 40 60 80 100 120 140 2.5 bar 36.3 psig 8.0 bar 116 psig 4.0 bar 58 psig 6.3 bar 91.4 psig 0 2 3 4 5 6 7 8 9 10 1 0 0 10 20 30 40 50 60 70 Flow – dm3/s Flow – (scfm) 20 40 60 80 100 120 140 Inlet Pressure – 10 bar (145 psig) Secondary Pressure – bar Secondary Pressure – (psig) 0 20 40 60 80 100 120 140 2.5 bar 36.3 psig 8.0 bar 116 psig 4.0 bar 58 psig 6.3 bar 91.4 psig 0 2 3 4 5 6 7 8 9 10 1 0 0 10 20 30 40 50 60 70 80 Flow – dm3/s Flow – (scfm) 20 40 60 80 100 120 140 160 Inlet Pressure – 10 bar (145 psig) Secondary Pressure – bar Secondary Pressure – (psig) 0 20 40 60 80 100 120 140 2.5 bar 36.3 psig 8.0 bar 116 psig 4.0 bar 58 psig 6.3 bar 91.4 psig 0 2 3 4 5 6 7 8 9 10 1 0 0 10 20 30 40 50 60 70 80 90 Flow – dm3/s Flow – (scfm) 20 40 60 80 100 120 140 160 180 3/8 Regulator 1/2 Regulator 1/4 Regulator For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting. Gauges 50mm (2″) Round 1/4″ center back mount 0-30 psig / 0-2 bar K4520N14030 0-60 psig / 0-4 bar K4520N14060 0-160 psig / 0-11 bar K4520N14160 0-300 psig / 0-20 bar K4520N14300 Square flush mount gauge 0-4 bar K4511SCR04B 0-10 bar K4511SCR11B 0-60 psig K4511SCR060 0-150 psig K4511SCR150 Square with adapter kit 0-4 bar P6G-PR11040 0-10 bar P6G-PR11100 0-60 psig P6G-PR11P06 0-150 psig P6G-PR11P15 Digital 1.75″ Round 1/8″ center back mount 0-160 psig / 0-11 bar K4517N14160D (Revised 05-13-14) Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B36 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Catalog 0700P-E Global Air Preparation System P32 Series Compact Common Regulator Compact Common – P1 Regulator – P32 Symbols Self relieving regulator with gauge Non relieving regulator 1 2 1 3 2 Port size Description Order code† Flow‡ dm3/s (scfm) Max. bar (psig) Height mm (inches) Width mm (inches) Depth mm (inches) 1/4″ 8 bar (125 psig) relieving P32HA92BNNP 28 (59) 20 (300) 136 (5.4) 60 (2.36) 60 (2.36) 3/8″ 8 bar (125 psig) relieving P32HA93BNNP 28 (59) 20 (300) 136 (5.4) 60 (2.36) 60 (2.36) 1/2″ 8 bar (125 psig) relieving P32HA94BNNP 28 (59) 20 (300) 136 (5.4) 60 (2.36) 60 (2.36) P2 P1 P1 P1 P2 P2 P2 P2 • Manifold style regulator with line pressure on both sides. • Pressure output is at front or rear. • Integral 1/4″, 3/8″ or 1/2″ ports (NPT, BSPP & BSPT) • Robust construction • Secondary pressure ranges 0-2 bar (0-30 psig), 0-4 bar, (0-60 psig), 0-8 bar (0-125 psig), 0-17 bar (0-250 psig) • Secondary aspiration plus balanced poppet provides quick response and accurate pressure regulation • Relieving & Non-relieving types • Non-rising knob † Standard part numbers shown in bold. For other models refer to Options chart above. ‡ Flow with 10 bar (145 psig) inlet pressure, 6.3 bar (91.3) psig) set pressure and 1 bar (14.5 psig) pressure drop. Options: Basic series Global modular compact regulator P32H Thread type BSPP 1 BSPT 2 NPT 9 Mounting P Plastic panel mount nut Relief Relieving B Non-relieving N Port size 1/4 2 3/8 3 1/2 4 Adjustment range With square gauge With round gauge psig bar Z 2 bar; 30 psig; 0.2 MPa 1 = 30* V = 2* M 4 bar; 60 psig; 0.4 MPa 3 = 60 S = 4 G 8 bar; 125 psig; 0.8 MPa 5 = 125 T = 8 J§ 17 bar; 250 psig; 1.7 MPa Without gauge Y 2 bar; 30 psig; 0.2 MPa L 4 bar; 60 psig; 0.4 MPa N 8 bar; 125 psig; 0.8 MPa H§ 17 bar; 250 psig; 1.7 MPa * Unit comes with 0-4 bar or 0-60 psig gauge respectively. § Not available with poly bowl with bowl guard. Bold items are most common. Engr level Current A P32H A 9 2 B N N P Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B37 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Catalog 0700P-E Global Air Preparation System P32 Series Compact Common Regulator NOTE: 51 mm (2.00 in.) hole required for panel nut mounting. Specifications Flow Charts Flow capacity* 1/4 28 dm3/s (59 scfm) 3/8 28 dm3/s (59 scfm) 1/2 28 dm3/s (59 scfm) Operating temperature -25°C to 65.5°C (-13°F to 150°F) Max. supply pressure 20 bar (300 psig) Adjusting range pressure 0-2 bar (30 psig) 0-4 bar (60 psig) 0-8 bar (125 psig) 0-17 bar (250 psig) Port size BSPP / BSPT / NPT 1/4, 3/8, 1/2 Gauge port (2 ea.) BSPP / BSPT / NPT 1/4 Weight 0.50 kg (1.10 lbs) * Inlet pressure 10 bar (145 psig). Secondary pressure 6.3 bar (91.3 psig). Material Specifications Body Zinc Adjustment knob Acetal Body cap ABS Bonnet 33% Glass-filled nylon Diaphragm assembly Nitrile / Zinc Bottom plug 33% Glass-filled nylon Valve assembly Brass / Nitrile Springs Main regulating valve Steel S.S. Seals Nitrile Panel nut Acetal Repair and Service Kits Regulator repair kit – relieving P32KA00RB Regulator repair kit – non-relieving P32KA00RC Panel mount nut – aluminum P32KA00MM Panel mount nut – plastic P32KA00MP Angle bracket (uses panel mount threads) P32KA00MR T-bracket with body connector P32KA00MT T-bracket P32KA00MB Body connector P32KA00CB P32 Common Port Regulator Inlet Pressure – 10 bar (145 psig) 2.5 bar 36.3 psig 8.0 bar 116 psig 4.0 bar 58 psig 6.3 bar 91.4 psig Secondary Pressure – bar Secondary Pressure – (psig) 0 20 40 60 80 100 0 2 3 4 5 6 7 1 0 0 10 20 30 40 50 60 Flow – dm3/s Flow – (scfm) 20 40 60 80 100 120 CAUTION: REGULATOR PRESSURE ADJUSTMENT – The working range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting devices may be obtained only by special design. For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting. WARNING Product rupture can cause serious injury. Do not connect regulator to bottled gas. Do not exceed Maximum primary pressure rating. ! Dimensions mm (inches) 60 60 (2.36) (2.36) 38.5 (1.52) 136.1 (5.36) 30 (1.18) 73.8 (2.91) For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting. Gauges 50mm (2″) Round 1/4″ center back mount 0-30 psig / 0-2 bar K4520N14030 0-60 psig / 0-4 bar K4520N14060 0-160 psig / 0-11 bar K4520N14160 0-300 psig / 0-20 bar K4520N14300 Square flush mount gauge 0-4 bar K4511SCR04B 0-10 bar K4511SCR11B 0-60 psig K4511SCR060 0-150 psig K4511SCR150 Square with adapter kit 0-4 bar P6G-PR11040 0-10 bar P6G-PR11100 0-60 psig P6G-PR11P06 0-150 psig P6G-PR11P15 Digital 1.75″ Round 1/8″ center back mount 0-160 psig / 0-11 bar K4517N14160D (Revised 05-13-14) Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B38 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Catalog 0700P-E Global Air Preparation System P33 Series Standard Regulator Standard Regulator – P33 Port size Description Order code† Flow‡ dm3/s (scfm) Max. bar (psig) Height mm (inches) Width mm (inches) Depth mm (inches) 1/2″ 8 bar (125 psig) relieving P33RA94BNNP 100 (212) 20 (300) 149 (5.9) 73 (2.9) 73 (2.9) 1/2″ 8 bar (125 psig) relieving + gauge P33RA94BNGP 100 (212) 20 (300) 149 (5.9) 73 (2.9) 73 (2.9) 3/4″ 8 bar (125 psig) relieving P33RA96BNNP 100 (212) 20 (300) 149 (5.9) 73 (2.9) 73 (2.9) 3/4″ 8 bar (125 psig) relieving + gauge P33RA96BNGP 100 (212) 20 (300) 149 (5.9) 73 (2.9) 73 (2.9) Symbols Self relieving regulator with gauge Non relieving regulator 1 2 1 3 2 • Integral 1/2″ or 3/4″ ports (NPT, BSPP & BSPT) • Robust but lightweight aluminum construction • Secondary pressure ranges 0-2 bar (0-30 psig), 0-4 bar, (0-60 psig), 0-8 bar (0-125 psig), 0-17 bar (0-250 psig) • Secondary aspiration plus balanced poppet provides quick response and accurate pressure regulation • Relieving & Non-relieving types • Non-rising knob † Standard part numbers shown in bold. For other models refer to Options chart above. ‡ Flow with 10 bar (145 psig) inlet pressure, 6.3 bar (91.3) psig) set pressure and 1 bar (14.5 psig) pressure drop. Options: Basic series Global modular standard regulator P33R Thread type BSPP 1 BSPT 2 NPT 9 Mounting P Plastic panel mount nut Relief Relieving B Non-relieving N Reverse flow-relieving R Port size 1/2 4 3/4 6 Adjustment range With round gauge Z 2 bar; 30 psig; 0.2 MPa M 4 bar; 60 psig; 0.4 MPa G 8 bar; 125 psig; 0.8 MPa J 17 bar; 250 psig; 1.7 MPa Without gauge Y 2 bar; 30 psig; 0.2 MPa L 4 bar; 60 psig; 0.4 MPa N 8 bar; 125 psig; 0.8 MPa H 17 bar; 250 psig; 1.7 MPa Bold items are most common. Engr level Current A P33R A 9 2 B N N P Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B39 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Catalog 0700P-E Global Air Preparation System P33 Series Standard Regulator Inlet Pressure – 10 bar (145 psig) Secondary Pressure – bar Secondary Pressure – (psig) 0 20 40 60 80 100 120 140 2.5 bar 36.3 psig 8.0 bar 116 psig 4.0 bar 58 psig 6.3 bar 91.4 psig 0 2 3 4 5 6 7 8 9 10 1 0 0 20 40 60 80 100 120 140 Flow – dm3/s Flow – (scfm) 40 80 120 160 200 240 280 Inlet Pressure – 10 bar (145 psig) Secondary Pressure – bar Secondary Pressure – (psig) 0 20 40 60 80 100 120 140 2.5 bar 36.3 psig 8.0 bar 116 psig 4.0 bar 58 psig 6.3 bar 91.4 psig 0 2 3 4 5 6 7 8 9 10 1 0 0 20 40 60 80 100 120 140 160 Flow – dm3/s Flow – (scfm) 40 80 120 160 200 240 280 300 340 NOTE: 61 mm (2.40 in.) hole required for panel nut mounting. Specifications Flow Charts Flow capacity* 1/2 100 dm3/s (212 scfm) 3/4 100 dm3/s (212 scfm) Operating temperature -25°C to 65.5°C (-13°F to 150°F) Max. supply pressure 20 bar (300 psig) Adjusting range pressure 0-2 bar (30 psig) 0-4 bar (60 psig) 0-8 bar (125 psig) 0-17 bar (250 psig) Port size BSPP / BSPT / NPT 1/2, 3/4 Gauge port (2 ea.) BSPP / BSPT / NPT 1/4 Weight 0.62 kg (1.37 lbs) * Inlet pressure 10 bar (145 psig). Secondary pressure 6.3 bar (91.3 psig). Repair and Service Kits Regulator repair kit – relieving P33KA00RB Regulator repair kit – non-relieving P33KA00RC Panel mount nut – aluminum P33KA00MM Panel mount nut – plastic P33KA00MP Angle bracket (uses panel mount threads) P33KA00MR T-bracket with body connector P32KA00MT T-bracket P32KA00MB Body connector P32KA00CB Material Specifications Body Aluminum Adjustment knob Acetal Body cap ABS Bonnet 33% Glass-filled nylon Diaphragm assembly Nitrile / Zinc Valve assembly Brass / Nitrile / Acetal Springs Main regulating valve Steel S.S. Seals Nitrile Panel nut Acetal 1/2 Regulator 3/4 Regulator CAUTION: REGULATOR PRESSURE ADJUSTMENT – The working range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting devices may be obtained only by special design. For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting. WARNING Product rupture can cause serious injury. Do not connect regulator to bottled gas. Do not exceed Maximum primary pressure rating. ! Dimensions mm (inches) 73 (2.87) 149 (5.87) 83.8 (3.30) 108 4.27) Round Gauge 73 (2.87) 37 (1.44) 44 (1.73) (Revised 05-13-14) For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting. Gauges 50mm (2″) Round 1/4″ center back mount 0-30 psig / 0-2 bar K4520N14030 0-60 psig / 0-4 bar K4520N14060 0-160 psig / 0-11 bar K4520N14160 0-300 psig / 0-20 bar K4520N14300 Digital 1.75″ Round 1/8″ center back mount 0-160 psig / 0-11 bar K4517N14160D Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B40 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Catalog 0700P-E Global Air Preparation System P31 Series Mini Filter / Regulator Mini Filter / Regulator – P31 Symbols 1 2 • Integral 1/4″ ports (NPT, BSPP & BSPT) • High efficiency 5 micron element as standard • Excellent water removal efficiency • Robust but lightweight aluminum construction • Positive bayonet latch to ensure correct & safe fitting Secondary pressure ranges 0-2 bar (0-30 psig), 0-4 bar, (0-60 psig), 0-8 bar (0-125 psig), 0-17 bar (0-250 psig) • Secondary aspiration plus balanced poppet provides quick response and accurate pressure regulation Port size Description Order code† Flow‡ dm3/s (scfm) Max. bar (psig) Height mm (inches) Width mm (inches) Depth mm (inches) 1/4″ 8 bar (125 psig) relieving – poly bowl – manual drain P31EA92EGMBN5P 14 (30) 10 (150) 164.1 (6.46) 40 (1.58) 64 (2.53) 1/4″ 8 bar (125 psig) relieving – poly bowl – pulse drain P31EA92EGBBN5P 14 (30) 10 (150) 164.1 (6.46) 40 (1.58) 64 (2.53) 1/4″ 8 bar (125 psig) relieving – metal bowl – manual drain P31EA92EMMBN5P 14 (30) 17 (250) 164.1 (6.46) 40 (1.58) 64 (2.53) 1/4″ 8 bar (125 psig) relieving – metal bowl – pulse drain P31EA92EMBBN5P 14 (30) 17 (250) 164.1 (6.46) 40 (1.58) 64 (2.53) † Standard part numbers shown in bold. For other models refer to Options chart above. ‡ Flow with 10 bar (145 psig) inlet pressure, 6.3 bar (91.3) psig) set pressure and 1 bar (14.5 psig) pressure drop. Options: Thread type BSPP 1 BSPT 2 NPT 9 Mounting P Plastic panel mount nut Relief B Relieving N Non-relieving Element 5μ Element E Bowl type Poly bowl with bowl guard G Metal bowl without sight gauge M Basic series Global modular mini filter / regulator P31E Port size 1/4 2 Bold items are most common. Drain type B Pulse drain M Manual drain Adjustment range With square gauge With round gauge psig bar Z 2 bar; 30 psig; 0.2 MPa 1 = 30* V = 2* M 4 bar; 60 psig; 0.4 MPa 3 = 60 S = 4 G 8 bar; 125 psig; 0.8 MPa 5 = 125 T = 8 J§ 17 bar; 250 psig; 1.7 MPa Without gauge Y 2 bar; 30 psig; 0.2 MPa L 4 bar; 60 psig; 0.4 MPa N 8 bar; 125 psig; 0.8 MPa H§ 17 bar; 250 psig; 1.7 MPa * Unit comes with 0-4 bar or 0-60 psig gauge respectively. § Not available with poly bowl with bowl guard. Engr level Current A P31E A 9 2 E G M B N 5 P Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B41 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Catalog 0700P-E Global Air Preparation System P31 Series Mini Filter / Regulator Inlet Pressure – 10 bar (145 psig) Secondary Pressure – bar Secondary Pressure – (psig) 0 20 40 60 80 100 120 140 2.5 bar 36.3 psig 8.0 bar 116 psig 4.0 bar 58 psig 6.3 bar 91.4 psig 0 2 3 4 5 6 7 8 9 10 1 0 5 10 15 20 25 30 35 Flow – dm3/s Flow – (scfm) 10 20 30 40 50 60 70 For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting. Specifications Flow capacity* 1/4 14 dm3/s (30.0 scfm) Operating Plastic bowl -10°C to 52°C (14°F to 125°F) temperature† Metal bowl -10°C to 65.5°C (14°F to 150°F) Max. supply Plastic bowl 10 bar (150 psig) pressure Metal bowl 17 bar (250 psig) Standard filtration 5 micron Useful retention 12 cm3 (0.4 US oz.) Adjusting range pressure 0-2 bar (30 psig) 0-4 bar (60 psig) 0-8 bar (125 psig) 0-17 bar (250 psig) Port size BSPP / BSPT / NPT 1/4 Gauge port (2 ea.)** BSPP / BSPT / NPT 1/8 Weight 0.19 kg (0.42 lbs) Flow Charts Repair and Service Kits Plastic bowl / Bowl guard manual drain P31KA00BGM Metal bowl / w/o sight gauge manual drain P31KA00BMM Plastic bowl / Bowl guard pulse drain P31KA00BGB Metal bowl / w/o sight gauge pulse drain P31KA00BMB 5μ particle filter element P31KA00ESE Regulator repair kit – relieving P31KA00RB Regulator repair kit – non-relieving P31KA00RC Panel mount nut – aluminum P31KA00MM Panel mount nut – plastic P31KA00MP Angle bracket (uses panel mount threads) P31KA00MR C-bracket (fits to body) P31KA00MW T-bracket with body connector P31KA00MT Body connector P31KA00CB * Inlet pressure 10 bar (145 psig). Secondary pressure 6.3 bar (91.3 psig). ** Non-gauge option only. † Units with square gauges: -15°C to 65.5°C (5°F to 150°F) Air quality: Within ISO 8573-1: 1991 Class 3 (Particulates) Within ISO 8573-1: 2001 Class 6 (Particulates) Material Specifications Body Aluminum Adjustment knob Acetal Body cap ABS Bonnet PBT Bowl Plastic bowl Polycarbonate Metal bowl Aluminum Bowl guard Nylon Filter element Polyethylene Seals Nitrile Springs Steel Valve assembly Brass / Nitrile Diaphragm assembly Brass / Nitrile Panel nut Acetal 1/4 Filter / Regulator Gauges Square flush mount gauge 0-4 bar K4511SCR04B 0-10 bar K4511SCR11B 0-60 psig K4511SCR060 0-150 psig K4511SCR150 WARNING Product rupture can cause serious injury. Do not connect regulator to bottled gas. Do not exceed Maximum primary pressure rating. ! Note: Flush-mounted gauge kits will not fit units originally purchased with threaded gauge ports. For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting. Dimensions mm (inches) 73.5 (2.89) 176.9 (6.96) 40 (1.58) 40 (1.58) 20 (.79) 33 (1.30) 4mm (5/32) I.D. tube barb fitting Bowl removal clearance 61.3 (2.41) Square Gauge 74.3 (2.93) Round Gauge Manual Drain Pulse Drain Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B42 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Catalog 0700P-E Global Air Preparation System P32 Series Compact Filter / Regulator Compact Filter / Regulator – P32 Symbols Port size Description Order code† Flow‡ dm3/s (scfm) Max. bar (psig) Height mm (inches) Width mm (inches) Depth mm (inches) 1/4″ 8 bar (125 psig) relieving – poly bowl – manual drain P32EA92EGMBNGP 42 (89) 10 (150) 254 (10.0) 60 (2.36) 60 (2.36) 1/4″ 8 bar (125 psig) relieving – poly bowl – auto drain P32EA92EGABNGP 42 (89) 10 (150) 248 (9.76) 60 (2.36) 60 (2.36) 1/4″ 8 bar (125 psig) relieving – metal bowl – manual drain P32EA92ESMBNGP 42 (89) 17 (250) 245 (9.66) 60 (2.36) 60 (2.36) 1/4″ 8 bar (125 psig) relieving – metal bowl – auto drain P32EA92ESABNGP 42 (89) 17 (250) 254 (10.0) 60 (2.36) 95 (3.74) 3/8″ 8 bar (125 psig) relieving – poly bowl – manual drain P32EA93EGMBNGP 58 (123) 10 (150) 254 (10.0) 60 (2.36) 60 (2.36) 3/8″ 8 bar (125 psig) relieving – poly bowl – auto drain P32EA93EGABNGP 58 (123) 10 (150) 248 (9.76) 60 (2.36) 60 (2.36) 3/8″ 8 bar (125 psig) relieving – metal bowl – manual drain P32EA93ESMBNGP 58 (123) 17 (250) 245 (9.66) 60 (2.36) 60 (2.36) 3/8″ 8 bar (125 psig) relieving – metal bowl – auto drain P32EA93ESABNGP 58 (123) 17 (250) 254 (10.0) 60 (2.36) 95 (3.74) 1/2″ 8 bar (125 psig) relieving – poly bowl – manual drain P32EA94EGMBNGP 64 (136) 10 (150) 245 (9.66) 60 (2.36) 95 (3.74) 1/2″ 8 bar (125 psig) relieving – poly bowl – auto drain P32EA94EGABNGP 64 (136) 10 (150) 248 (9.76) 60 (2.36) 95 (3.74) 1/2″ 8 bar (125 psig) relieving – metal bowl – manual drain P32EA94ESMBNGP 64 (136) 17 (250) 245 (9.66) 60 (2.36) 60 (2.36) 1/2″ 8 bar (125 psig) relieving – metal bowl – auto drain P32EA94ESABNGP 64 (136) 17 (250) 254 (10.0) 60 (2.36) 60 (2.36) • Integral 1/4″, 3/8″ or 1/2″ ports (NPT, BSPP & BSPT) • High efficiency 5 micron element as standard • Excellent water removal efficiency • Robust but lightweight aluminum construction • Positive bayonet latch to ensure correct & safe fitting • Secondary pressure ranges 0-2 bar (0-30 psig), 0-4 bar, (0-60 psig), 0-8 bar (0-125 psig), 0-17 bar (0-250 psig) • Secondary aspiration plus balanced poppet provides quick response and accurate pressure regulation † Standard part numbers shown in bold. For other models refer to Options chart above. ‡ Flow with 10 bar (145 psig) inlet pressure, 6.3 bar (91.3) psig) set pressure and 1 bar (14.5 psig) pressure drop. 1 2 Options: Bowl type Poly bowl with bowl guard G Metal bowl without sight gauge M Metal bowl with sight gauge S Port size 1/4 2 3/8 3 1/2 4 Bold items are most common. P32E A 9 2 E G M B N N P Thread type BSPP 1 BSPT 2 NPT 9 Mounting P Plastic panel mount nut Relief B Relieving N Non-relieving Element 5μ Element E Basic series Global modular mini filter / regulator P32E Drain type M Manual drain A Auto drain Adjustment range With square gauge With round gauge psig bar Z 2 bar; 30 psig; 0.2 MPa 1 = 30* V = 2* M 4 bar; 60 psig; 0.4 MPa 3 = 60 S = 4 G 8 bar; 125 psig; 0.8 MPa 5 = 125 T = 8 J§ 17 bar; 250 psig; 1.7 MPa Without gauge Y 2 bar; 30 psig; 0.2 MPa L 4 bar; 60 psig; 0.4 MPa N 8 bar; 125 psig; 0.8 MPa H§ 17 bar; 250 psig; 1.7 MPa * Unit comes with 0-4 bar or 0-60 psig gauge respectively. § Not available with poly bowl with bowl guard. Engr level Current A Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B43 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Catalog 0700P-E Global Air Preparation System P32 Series Compact Filter / Regulator Specifications Flow Charts Flow capacity* 1/4 42 dm3/s (89 scfm) 3/8 58 dm3/s (123 scfm) 1/2 64 dm3/s (136 scfm) Operating Plastic bowl -25°C to 52°C (-13°F to 125°F) temperature Metal bowl -25°C to 65.5°C (-13°F to 150°F) Max. supply Plastic bowl 10 bar (150 psig) pressure Metal bowl 17 bar (250 psig) Standard filtration 5 micron Useful retention† 51 cm3 (1.7 US oz.) Adjusting range pressure 0-2 bar (30 psig) 0-4 bar (60 psig) 0-8 bar (125 psig) 0-17 bar (250 psig) Port size BSPP / BSPT / NPT 1/4, 3/8, 1/2 Gauge port (2 ea.) BSPP / BSPT / NPT 1/4 Weight 0.53 kg (1.17 lbs) * Inlet pressure 10 bar (145 psig). Secondary pressure 6.3 bar (91.3 psig). † Useful retention refers to volume below the quiet zone baffle. Air quality: Within ISO 8573-1: 1991 Class 3 (Particulates) Within ISO 8573-1: 2001 Class 6 (Particulates) Material Specifications Body Aluminum Adjustment knob Acetal Body cap ABS Element retainer / Baffle Acetal Bowl Plastic bowl Polycarbonate Metal bowl Zinc Bowl guard Nylon Filter element Sintered polyethylene Seals Nitrile Springs Main regulating / valve Steel / S.S. Valve assembly Brass / Nitrile Diaphragm assembly Nitrile / Zinc Panel nut Acetal Sight gauge Metal bowl Polycarbonate WARNING Product rupture can cause serious injury. Do not connect regulator to bottled gas. Do not exceed Maximum primary pressure rating. ! Manual Drain Automatic Drain Dimensions mm (inches) 81 (3.19) Square Gauge 93 (3.66) Round Gauge 60 (2.36) 60 (2.36) 97.6 (3.84) 261.6 (10.30) 30 (1.18) 58 (2.28) 4mm (5/32) I.D. tube barb fitting Bowl removal clearance (Revised 05-13-14) Inlet Pressure – 10 bar (145 psig) Secondary Pressure – bar Secondary Pressure – (psig) 0 20 40 60 80 100 120 140 2.5 bar 36.3 psig 8.0 bar 116 psig 4.0 bar 58 psig 6.3 bar 91.4 psig 0 2 3 4 5 6 7 8 9 10 1 0 0 10 20 30 40 50 60 70 80 90 Flow – dm3/s Flow – (scfm) 20 40 60 80 100 120 140 160 180 Inlet Pressure – 10 bar (145 psig) Secondary Pressure – bar Secondary Pressure – (psig) 0 20 40 60 80 100 120 140 2.5 bar 36.3 psig 8.0 bar 116 psig 4.0 bar 58 psig 6.3 bar 91.4 psig 0 2 3 4 5 6 7 8 9 10 1 0 0 10 20 30 40 50 60 70 Flow – dm3/s Flow – (scfm) 20 40 60 80 100 120 140 Inlet Pressure – 10 bar (145 psig) Secondary Pressure – bar Secondary Pressure – (psig) 0 20 40 60 80 100 120 140 2.5 bar 36.3 psig 8.0 bar 116 psig 4.0 bar 58 psig 6.3 bar 91.4 psig 0 2 3 4 5 6 7 8 9 10 1 0 0 10 20 30 40 50 60 70 80 Flow – dm3/s Flow – (SCFM) 20 40 60 80 100 120 140 160 For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting. Repair and Service Kits Plastic bowl / Bowl guard manual drain P32KA00BGM Metal bowl / Sight gauge manual drain P32KA00BSM Auto drain P32KA00DA 5μ particle filter element P32KA00ESE Regulator repair kit – relieving P32KB00RB Regulator repair kit – non-relieving P32KB00RC Panel mount nut – aluminum P32KA00MM Panel mount nut – plastic P32KA00MP Angle bracket (fits to panel mount threads) P32KB00MR T-bracket (fits to body connector) P32KA00MB T-bracket with body connector P32KA00MT Body connector P32KA00CB 1/4 Filter / Regulator 3/8 Filter/Regulator 1/2 Filter/Regulator Gauges 50mm (2″) Round 1/4″ center back mount 0-30 psig / 0-2 bar K4520N14030 0-60 psig / 0-4 bar K4520N14060 0-160 psig / 0-11 bar K4520N14160 0-300 psig / 0-20 bar K4520N14300 Digital 1.75″ Round 1/8″ center back mount 0-160 psig / 0-11 bar K4517N14160D Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B44 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Catalog 0700P-E Global Air Preparation System P33 Series Standard Filter / Regulator Standard Filter / Regulator – P33 Symbols Port size Description Order code† Flow‡ dm3/s (scfm) Max. bar (psig) Height mm (inches) Width mm (inches) Depth mm (inches) 1/2″ 8 bar (125 psig) relieving – poly bowl – manual drain P33EA94EGMBNGP 90 (191) 10 (150) 291 (11.44) 73 (2.9) 73 (2.9) 1/2″ 8 bar (125 psig) relieving – poly bowl – auto drain P33EA94EGABNGP 90 (191) 10 (150) 285 (11.22) 73 (2.9) 73 (2.9) 1/2″ 8 bar (125 psig) relieving – metal bowl – manual drain P33EA94ESMBNGP 90 (191) 17 (250) 282 (11.0) 73 (2.9) 73 (2.9) 1/2″ 8 bar (125 psig) relieving – metal bowl – auto drain P33EA94ESABNGP 90 (191) 17 (250) 291 (11.44) 73 (2.9) 108 (4.27) 3/4″ 8 bar (125 psig) relieving – poly bowl – manual drain P33EA96EGMBNGP 98 (208) 10 (150) 282 (11.0) 73 (2.9) 108 (4.27) 3/4″ 8 bar (125 psig) relieving – poly bowl – auto drain P33EA96EGABNGP 98 (208) 10 (150) 285 (11.22) 73 (2.9) 108 (4.27) 3/4″ 8 bar (125 psig) relieving – metal bowl – manual drain P33EA96ESMBNGP 98 (208) 17 (250) 291 (11.44) 73 (2.9) 73 (2.9) 3/4″ 8 bar (125 psig) Relieving – Metal bowl – Auto drain P33EA96ESABNGP 98 (208) 17 (250) 282 (11.0) 73 (2.9) 73 (2.9) • Integral 1/2″ or 3/4″ ports (NPT, BSPP & BSPT) • High efficiency 5 micron element as standard • Excellent water removal efficiency • Robust but lightweight aluminum construction • Positive bayonet latch to ensure correct & safe fitting • Secondary pressure ranges 0-2 bar (0-30 psig), 0-4 bar, (0-60 psig), 0-8 bar (0-125 psig), 0-17 bar (0-250 psig) • Secondary aspiration plus balanced poppet provides quick response and accurate pressure regulation † Standard part numbers shown in bold. For other models refer to Options chart above. ‡ Flow with 10 bar (145 psig) inlet pressure, 6.3 bar (91.3) psig) set pressure and 1 bar (14.5 psig) pressure drop. 1 2 Options: Thread type BSPP 1 BSPT 2 NPT 9 Mounting P Plastic panel mount nut Relief B Relieving N Non-relieving Element 5μ Element E Bowl type Poly bowl with bowl guard G Metal bowl without sight gauge M Metal bowl with sight gauge S Basic series Global modular standard filter / regulator P33E Port size 1/2 4 3/4 6 Bold items are most common. Drain type M Manual drain A Auto drain Adjustment range With round gauge Z 2 bar; 30 psig; 0.2 MPa M 4 bar; 60 psig; 0.4 MPa G 8 bar; 125 psig; 0.8 MPa J§ 17 bar; 250 psig; 1.7 MPa Without gauge Y 2 bar; 30 psig; 0.2 MPa L 4 bar; 60 psig; 0.4 MPa N 8 bar; 125 psig; 0.8 MPa H§ 17 bar; 250 psig; 1.7 MPa § Not available with poly bowl with bowl guard. Engr level Current A P33E A 9 2 E G M B N N P Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B45 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Catalog 0700P-E Global Air Preparation System P33 Series Standard Filter / Regulator Inlet Pressure – 10 bar (145 psig) Secondary Pressure – bar Secondary Pressure – (psig) 0 20 40 60 80 100 120 140 2.5 bar 36.3 psig 8.0 bar 116 psig 4.0 bar 58 psig 6.5 bar 94.3 psig 0 2 3 4 5 6 7 8 9 10 1 0 0 10 20 30 40 50 60 70 80 90 100 110 120 130 Flow – dm3/s Flow – (scfm) 20 40 60 80 100 120 140 160 180 200 220 240 260 Specifications Flow Charts Flow capacity* 1/2 90 dm3/s (191 scfm) 3/4 98 dm3/s (208 scfm) Operating Plastic bowl -25°C to 52°C (-13°F to 125°F) temperature Metal bowl -25°C to 65.5°C (-13°F to 150°F) Supply Plastic bowl 10 bar (150 psig) pressure Metal bowl 17 bar (250 psig) Standard filtration 5 micron Useful retention† 85 cm3 (2.8 US oz.) Adjusting range pressure 0-2 bar (30 psig) 0-4 bar (60 psig) 0-8 bar (125 psig) 0-17 bar (250 psig) Port size BSPP / BSPT / NPT 1/2, 3/4 Gauge port (2 ea.) BSPP / BSPT / NPT 1/4 Weight 0.85 kg (1.87 lbs) * Inlet pressure 10 bar (145 psig). Secondary pressure 6.3 bar (91.3 psig). † Useful retention refers to volume below the quiet zone baffle. Air quality: Within ISO 8573-1: 1991 Class 3 (Particulates) Within ISO 8573-1: 2001 Class 6 (Particulates) Material Specifications Body Aluminum Adjustment knob Acetal Body cap ABS Element retainer / Baffle Acetal Bowls Plastic bowl Polycarbonate Metal bowl Aluminum Filter element Sintered Polyethylene Seals Nitrile Springs Main regulating / Valve Steel / S.S. Valve assembly Brass / Nitrile Diaphragm assembly Nitrile / Zinc Panel nut Acetal Sight gauge Metal bowl Polycarbonate Repair and Service Kits Plastic bowl / Bowl guard manual drain P33KA00BGM Metal bowl / Sight gauge manual drain P33KA00BSM Auto drain P32KA00DA 5μ particle filter element P33KA00ESE Regulator repair kit – Relieving P33KA00RB Regulator repair kit – Non-relieving P33KA00RC Panel mount nut – Aluminum P33KA00MM Panel mount nut – Plastic P33KA00MP Angle bracket (fits to panel mount threads) P33KA00MR T-bracket (fits to body connector) P32KA00MB T-bracket with body connector P32KA00MT Body connector P32KA00CB 1/2 Filter / Regulator Inlet Pressure – 10 bar (145 psig) Secondary Pressure – bar Secondary Pressure – (psig) 0 20 40 60 80 100 120 140 2.5 bar 36.3 psig 8.0 bar 116 psig 4.0 bar 58 psig 6.5 bar 94.3 psig 0 2 3 4 5 6 7 8 9 10 1 0 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 Flow – dm3/s Flow – (scfm) 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 3/4 Filter/Regulator WARNING Product rupture can cause serious injury. Do not connect regulator to bottled gas. Do not exceed Maximum primary pressure rating. ! Manual Drain Automatic Drain Dimensions mm (inches) 73 (2.87) 291 (11.44) 51 (2.00) 4mm (5/32) I.D. tube barb fitting Bowl removal clearance (Manual & Auto Drain) 37 (1.44) 73 (2.87) 72 (2.83) 104 (4.09) 108 (4.27) Round Gauge Use 10mm or 3/8″ Flex Tubing For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting. Gauges 50mm (2″) Round 1/4″ center back mount 0-30 psig / 0-2 bar K4520N14030 0-60 psig / 0-4 bar K4520N14060 0-160 psig / 0-11 bar K4520N14160 0-300 psig / 0-20 bar K4520N14300 Digital 1.75″ Round 1/8″ center back mount 0-160 psig / 0-11 bar K4517N14160D (Revised 05-13-14) Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B46 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Catalog 0700P-E Global Air Preparation System P31 Series Mini Lubricator Mini Lubricator – P31 Symbol 1 2 Lubricator with drain • Integral 1/4″ ports (NPT, BSPP & BSPT) • Robust but lightweight aluminum construction • Proportional oil delivery over a wide range of air flows • Finger tip rachet control for precise oil drip rate adjustment † Standard part numbers shown in bold. For other models refer to Options chart above. ‡ Flow with 6.3 bar (91.3 psig) inlet pressure and 0.34 bar (4.9 psig) pressure drop. Port size Description Order code† Flow‡ dm3/s (scfm) Max. bar (psig) Height mm (inches) Width mm (inches) Depth mm (inches) 1/4″ Poly bowl – No drain P31LA92LGNN 13 (28) 10 (150) 147.5 (5.80) 40 (1.58) 42.7 (1.68) 1/4″ Metal bowl – No drain P31LA92LMNN 13 (28) 17 (250) 147.5 (5.80) 40 (1.58) 42.7 (1.68) Options: Thread type BSPP 1 BSPT 2 NPT 9 Mounting N No bracket Lube type Oil mist standard sight dome L Drain type N No drain closed end Bowl type G Poly bowl with bowl guard M Metal bowl without sight gauge Basic series Global modular mini lubricator P31L Port size 1/4 2 Bold items are most common. Engr level Current A P31L A 9 2 L G N N Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B47 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Catalog 0700P-E Global Air Preparation System P31 Series Mini Lubricator Pressure Drop – bar Pressure Drop – (psig) 0 2 4 6 5 3 1 7 0 0 0 5 10 15 20 25 Flow – dm3/s Flow – (scfm) 10 20 30 40 50 0.1 0.2 0.3 0.4 0.5 1.6 23.2 Primary Pressure – bar Primary Pressure – psig 4.0 58 6.3 91.4 10 145 Specifications Flow capacity* 1/4 13 dm3/s (28 scfm) Operating Plastic bowl -10°C to 52°C (14°F to 125°F) temperature Metal bowl -10°C to 65.5°C (14°F to 150°F) Max. supply Plastic bowl 10 bar (150 psig) pressure Metal bowl 17 bar (250 psig) Useful retention 18 cm3 (0.6 US oz.) Port size BSPP / BSPT / NPT 1/4 Weight 0.13 kg (0.29 lbs) * Inlet pressure 6.3 bar (91.3 psig). Pressure drop 0.34 bar (4.9 psig). Material Specifications Body Aluminum Body cap ABS Bowl Plastic bowl Polycarbonate Metal bowl Aluminum Seals Nitrile Sight dome Polycarbonate Suggested lubricant ISO / ASTM VG32 Pick-up filter Sintered bronze Flow Charts Repair and Service Kits Plastic bowl / Bowl guard no drain P31KA00BGN Drip control assembly P32KA00PG Fill plug P31KA00PL C-bracket (fits to body) P31KA00MW T-bracket with body connector P31KA00MT Body connector P31KA00CB 1/4 Lubricator Suggested Lubricant ……………………………………….. F442 Oil Petroleum based oil of 100 to 200 SUS viscosity at 38°C (100°F) and an aniline point greater than 93°C (200°F) (DO NOT USE OILS WITH ADDITIVES, COMPOUNDED OILS CONTAINING SOLVENTS, GRAPHITE, DETERGENTS, OR SYNTHETIC OILS.) Dimensions mm (inches) 40 (1.58) 40 (1.58) 20 (.79) 56.3 (2.22) 153.3 (6.04) 33 (1.30) Bowl removal clearance Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B48 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Catalog 0700P-E Global Air Preparation System P32 Series Compact Lubricator Compact Lubricator – P32 Port size Description Order code† Flow‡ dm3/s (scfm) Max. bar (psig) Height mm (inches) Width mm (inches) Depth mm (inches) 1/4″ Poly bowl – No drain P32LA92LGNN 18 (38) 10 (150) 211 (8.30) 60 (2.36) 60 (2.36) 1/4″ Metal bowl – No drain P32LA92LSNN 18 (38) 17 (250) 211 (8.30) 60 (2.36) 60 (2.36) 3/8″ Poly bowl – No drain P32LA93LGNN 32 (68) 10 (150) 211 (8.30) 60 (2.36) 60 (2.36) 3/8″ Metal bowl – No drain P32LA93LSNN 32 (68) 17 (250) 211 (8.30) 60 (2.36) 60 (2.36) 1/2″ Poly bowl – No drain P32LA94LGNN 47 (100) 10 (150) 211 (8.30) 60 (2.36) 60 (2.36) 1/2″ Metal bowl – No drain P32LA94LSNN 47 (100) 17 (250) 211 (8.30) 60 (2.36) 60 (2.36) • Integral 1/4″, 3/8″ or 1/2″ ports (NPT, BSPP & BSPT) • Robust but lightweight aluminum construction • Proportional oil delivery over a wide range of air flows • Finger tip rachet control for precise oil drip rate adjustment • Fill from top under system pressure † Standard part numbers shown in bold. For other models refer to Options chart above. ‡ Flow with 6.3 bar (91.3 psig) inlet pressure and 0.34 bar (4.9 psig) pressure drop. Symbol 1 2 Lubricator with drain Options: Thread type BSPP 1 BSPT 2 NPT 9 Mounting N No bracket Drain type N No drain closed end Bowl type G Poly bowl with bowl guard M Metal bowl without sight gauge S Metal bowl with sight gauge Basic series Global modular compact lubricator P32L Port size 1/4 2 3/8 3 1/2 4 Bold items are most common. Lube type Oil mist standard sight dome L Engr level Current A P32L A 9 2 L G N N Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B49 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Catalog 0700P-E Global Air Preparation System P32 Series Compact Lubricator Pressure Drop – bar Pressure Drop – (psig) 0 2 4 6 5 3 1 7 0 0 0 10 20 30 40 50 60 70 80 Flow – dm3/s Flow – (scfm) 20 40 60 80 100 120 140 160 0.1 0.2 0.3 0.4 0.5 1.6 23.2 Primary Pressure – bar Primary Pressure – psig 4.0 58 6.3 91.4 10 145 Pressure Drop – bar Pressure Drop – (psig) 0 2 4 6 5 3 1 7 0 0 0 10 20 30 Flow – dm3/s Flow – (scfm) 10 20 30 40 50 60 0.1 0.2 0.3 0.4 0.5 1.6 23.2 Primary Pressure – bar Primary Pressure – psig 4.0 58 6.3 91.4 10 145 Pressure Drop – bar Pressure Drop – (psig) 0 2 4 6 5 3 1 7 0 0 0 10 20 30 40 50 60 70 Flow – dm3/s Flow – (scfm) 20 40 60 80 100 120 140 0.1 0.2 0.3 0.4 0.5 1.6 23.2 Primary Pressure – bar Primary Pressure – psig 4.0 58 6.3 91.4 10 145 Specifications Flow Charts Flow capacity* 1/4 18 dm3/s (38 scfm) 3/8 32 dm3/s (68 scfm) 1/2 47 dm3/s (100 scfm) Operating Plastic bowl -10°C to 52°C (14°F to 125°F) temperature Metal bowl -10°C to 65.5°C (14°F to 150°F) Max. supply Plastic bowl 10 bar (150 psig) pressure Metal bowl 17 bar (250 psig) Useful retention 121 cm3 (4.09 US oz.) Port size BSPP / BSPT / NPT 1/4, 3/8, 1/2 Weight 0.31 kg (0.68 lbs) * Inlet pressure 6.3 bar (91.3 psig). Pressure drop 0.34 bar (4.9 psig). Material Specifications Body Aluminum Body cap ABS Bowls Plastic bowl Polycarbonate Metal bowl Aluminum Seals Nitrile Sight dome Polycarbonate Sight gauge Metal bowl Polycarbonate Suggested lubricant ISO / ASTM VG32 Pick-up filter Sintered bronze Repair and Service Kits Plastic bowl / Bowl guard no drain P32KA00BGN Drip control assembly P32KA00PG Fill plug P32KA00PL L-bracket (fits to body) P32KA00ML T-bracket (fits to body connector) P32KA00MB T-bracket with body connector P32KA00MT Body connector P32KA00CB 1/4 Lubricator 3/8 Lubricator 1/2 Lubricator Suggested Lubricant ……………………………………….. F442 Oil Petroleum based oil of 100 to 200 SUS viscosity at 38°C (100°F) and an aniline point greater than 93°C (200°F) (DO NOT USE OILS WITH ADDITIVES, COMPOUNDED OILS CONTAINING SOLVENTS, GRAPHITE, DETERGENTS, OR SYNTHETIC OILS.) Dimensions mm (inches) 60 (2.36) 60 (2.36) 62.3 (2.45) 217.3 (8.56) 30 (1.18) 58 (2.28) Bowl removal clearance Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B50 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Catalog 0700P-E Global Air Preparation System P33 Series Standard Lubricator Standard Lubricator – P33 Port size Description Order code† Flow‡ dm3/s (scfm) Max. bar (psig) Height mm (inches) Width mm (inches) Depth mm (inches) 1/2″ Poly bowl – No drain P33LA94LGNN 48 (102) 10 (150) 234 (9.21) 73 (2.9) 73 (2.9) 1/2″ Metal bowl – No drain P33LA94LSNN 48 (102) 17 (250) 234 (9.21) 73 (2.9) 73 (2.9) 3/4″ Poly bowl – No drain P33LA96LGNN 68 (144) 10 (150) 234 (9.21) 73 (2.9) 73 (2.9) 3/4″ Metal bowl – No drain P33LA96LSNN 68 (144) 17 (250) 234 (9.21) 73 (2.9) 73 (2.9) • Integral 1/2″ or 3/4″ ports (NPT, BSPP & BSPT) • Robust but lightweight aluminum construction • Proportional oil delivery over a wide range of air flows • Finger tip rachet control for precise oil drip rate adjustment • Fill from top under system pressure † Standard part numbers shown in bold. For other models refer to Options chart above. ‡ Flow with 6.3 bar (91.3 psig) inlet pressure and 0.34 bar (4.9 psig) pressure drop. Symbol 1 2 Lubricator with drain Options: Lube type Oil mist standard sight dome L Thread type BSPP 1 BSPT 2 NPT 9 Mounting N No bracket Drain type N No drain closed end Bowl type G Poly bowl with bowl guard M Metal bowl without sight gauge S Metal bowl with sight gauge Basic series Global modular standard lubricator P33LA Port size 1/2 4 3/4 6 Bold items are most common. Engr level Current A P33L A 9 2 L G N N Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B51 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Catalog 0700P-E Global Air Preparation System P33 Series Standard Lubricator Pressure Drop – bar Pressure Drop – (psig) 0 2 4 6 5 3 1 7 0 0 0 10 20 30 40 50 60 70 80 90 100 110 120 Flow – dm3/s Flow – (scfm) 20 40 60 80 100 120 140 160 180 200 220 240 0.1 0.2 0.3 0.4 0.5 1.6 23.2 Primary Pressure – bar Primary Pressure – psig 4.0 58 6.3 91.4 10 145 Pressure Drop – bar Pressure Drop – (psig) 0 2 4 6 5 3 1 7 0 0 0 10 20 30 40 50 60 70 80 90 100 110 120 Flow – dm3/s Flow – (scfm) 20 40 60 80 100 120 140 160 180 200 220 240 0.1 0.2 0.3 0.4 0.5 1.6 23.2 Primary Pressure – bar Primary Pressure – psig 4.0 58 6.3 91.4 Specifications Flow Charts Flow capacity* 1/2 48 dm3/s (102 scfm) 3/4 68 dm3/s (144 scfm) Operating Plastic bowl -10°C to 52°C (14°F to 125°F) temperature Metal Bowl -10°C to 65.5°C (14°F to 150°F) Max. supply Plastic bowl 10 bar (150 psig) pressure Metal bowl 17 bar (250 psig) Useful retention 181 cm3 (6.1 US oz.) Port size BSPP / BSPT / NPT 1/2, 3/4 Weight 0.47 kg (1.04 lbs) * Inlet pressure 6.3 bar (91.3 psig). Pressure drop 0.34 bar (4.9 psig). Material Specifications Body Aluminum Body cap ABS Bowls Plastic bowl Polycarbonate Metal bowl Aluminum Seals Nitrile Sight dome Polycarbonate Sight gauge Metal bowl Polycarbonate Suggested lubricant ISO / ASTM VG32 Pick-up filter Sintered bronze Repair and Service Kits Plastic bowl / Bowl guard no drain P33KA00BGN Drip control assembly P32KA00PG Fill plug P32KA00PL L-bracket (fits to body) P33KA00ML T-bracket (fits to body connector) P32KA00MB T-bracket with body connector P32KA00MT Body connector P32KA00CB 1/2 Lubricator 3/4 Lubricator Suggested Lubricant ……………………………………….. F442 Oil Petroleum based oil of 100 to 200 SUS viscosity at 38°C (100°F) and an aniline point greater than 93°C (200°F) (DO NOT USE OILS WITH ADDITIVES, COMPOUNDED OILS CONTAINING SOLVENTS, GRAPHITE, DETERGENTS, OR SYNTHETIC OILS.) Dimensions mm (inches) 73 (2.90) 73 (2.90) 51 (2.00) 234 (9.20) 36 (1.44) 51 (2.00) Bowl removal clearance Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B52 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories P31P / P32P Series Electronic Proportional Regulators Catalog 0700P-E Global Air Preparation System Options: Cables P31P Mounting brackets P32P Mounting brackets P31P Series Bottom exhaust P32P Series Bottom exhaust L-Bracket Foot Bracket L-Bracket Foot Bracket • Very fast response times • Accurate output pressure • Micro parameter settings • Selectable I/O parameters • Quick, full flow exhaust • LED display indicates output pressure • No air consumption in steady state • Multiple mounting options • Protection to IP65 • P31P flows to 19 dm3/s (40 scfm) • P32P flows to 57 dm3/s (120 scfm) Order Code Description P3HKA00ML L-Bracket mounting kit P3HKA00MC Foot bracket mounting kit Order Code Description CB-M12-4P-2M 2 mtr. cable with moulded straight M12x1 connector Order Code Description P3KKA00ML L-Bracket mounting kit P3KKA00MC Foot bracket mounting kit Proportional Regulators – P31P & P32P D) Digital PNP output only, no analog output selectable P) Digital PNP and analogue 0-10V outputs selectable, by means of parameter 6. (Factory default 0-10V) N) Digital NPN and analog 0-10 V outputs selectable by means of parameter 6. Factory default 0-10V) M) Analog 4-20mA output only. Note: On all analog outputs the F.S. value can be adjusted by means of parameter 8. † When the supply voltage is lost the unit will automatically exhaust the regulated pressure to 0 bar (atmospheric pressure) ‡ Factory setting is 0-10 V control signal. 4-20 mA control signal available via parameter 4 on keypad. Version Bottom ported exhaust (NC) A Bottom ported forced exhaust (NO)† E Thread type BSPP 1 BSPT 2 NPT 9 Port size Global modular mini (1/4″) 2 Global modular compact (1/2″) 4 Pressure range Z 0 – 2 bar (0-29 PSIG) D 0 – 10 bar (0-145 PSIG) Power supply 2 24 volts Control signal V 0-10V‡ Input Connector 1 M12 (4-pin) Output signal D Digital, PNP P PNP or 0-10V N NPN or 0-10V M 4-20mA fixed Body size Global modular mini (1/4″) P31P Global modular compact (1/2″) P32P Bold items are most common. Engr level Current A P31P A 9 2 A D 2 V D 1 A Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B53 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators P31P / P32P Series Electronic Proportional Regulators Catalog 0700P-E Global Air Preparation System Schematic Technical Information Working medium Compressed air or inert gasses, filtered to 40μ. Supply pressure Max. Operating Pressure: 2 bar unit:………………………. 3 bar (43.5 psig) 10 bar unit: ……………………… 10.5 bar (152 psig) Min. Operating Pressure…….. P2 Pressure + 0.5 bar (7.3 psig) Pressure control range Available in three pressure ranges, 0-2 bar (0-29 psig), 0-7 bar (0-101.5 psig) or 0-10 bar (0-145 psig). Pressure range can be changed through the software at all times. (parameter 19) Temperature range 0°C up to +50°C (32°F up to122°F) Weights: P31P = 0.291 kg (0.64 lbs) P32P = 0.645 kg (1.42 lbs) Air consumption No consumption in stable regulated situation. Display The regulator is provided with a digital display, indicating the output pressure, either in bar or psig. The factory setting is as indicated on the label, can be changed through to software at all times (parameter 14) Supply voltage 24 VDC +/- 10% Power consumption Max. 1.1W with unloaded signal outputs Control signals The electronic pressure regulator can be externally controlled through an analogue control signal of either 0-10V or 4-20mA. (parameter 4). Output signals As soon as the output pressure is within the signal band a signal is given of 24VDC, PNP Ri = 1 kOhm Outside the signal band this connection is 0V. Connections (In case of output signal (Option D) Central M12 connector 4-pole The electrical connections are as follows: Pin No. Function Color 1 24 V Supply Brown 2 0 to 10 V Control Signal Ri = 100k W White 4 to 20mA Control Signal Ri = 500 W 3 0 V (GND) Supply Blue 4 24 V Alarm Output Signal Black Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B54 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories P31P / P32P Series Electronic Proportional Regulators Catalog 0700P-E Global Air Preparation System Technical information Advanced functionality Flow Charts P32P Regulator 1/2” Ports P31P Regulator 1/4” Ports Inlet Pressure – 10 bar (145 psig) Secondary Pressure – bar Secondary Pressure – (psig) 0 20 40 60 80 100 120 140 0 2 3 4 5 6 7 8 9 10 1 0 5 10 15 20 25 30 35 Flow – dm3/s Flow – (scfm) 10 20 30 40 50 60 70 Inlet Pressure – 10 bar (145 psig) Secondary Pressure – bar Secondary Pressure – (psig) 0 20 40 60 80 100 120 140 0 2 3 4 5 6 7 8 9 10 1 0 0 10 20 30 40 50 60 70 80 90 100 Flow – dm3/s Flow – (scfm) 20 40 60 80 100 120 140 160 180 200 Response time P31P P32P 2 to 4 bar 25 msecs 35 msecs 1 to 6 bar 55 msecs 135 msecs 4 to 2 bar 70 msecs 85 msecs 6 to 1 bar 80 msecs 225 msecs To fill volume of: 100cm3 – P31P 330cm3 – P32P connected to the outlet of the regulator. Pilot valve protection When the required output pressure can not be achieved because of a lack of input pressure the unit will open fully and will display NoP. Approximately every 10 seconds the unit will retry. The output pressure will then be approximately equal to the inlet pressure. As soon as the input pressure is back on the required level, the normal control function follows. Safety exhaust Should the control signal fall below 0.1 volts the valve will automatically dump downstream system pressure . Input protection The unit has built-in protection against failure and burnout resulting from incorrect input value, typically: The 24VDC supply is incorrectly connected to the setpoint input, the display will show ‘OL’, as an overload indication. The unit will need to be rewired and when correctly connected will operate normally. The overload indicator ‘OL’ will also appear should the wrong input value be applied or the wrong input value be programmed: 4 – 20m instead of 0 – 10V. To correct this a different set point value should be input or the unit reprogrammed to correct the set point value acceptance. (via parameter 4). Dead band The dead band is preset at 1.3% of Full Scale*, adjustable via parameter 13. Accuracy Linearity: = < 0.3% of Full Scale.* Proportional band The proportional band is preset at 10% of Full Scale.* Fail safe operation • If the P31P / P32P unit has an “0” or “A” in the 12th digit of the model number – When the supply voltage drops, the electronic control reverts to the fail safe mode. The last known output pressure is maintained at approximately the same level depending upon air consumption. The digital display indicates the last known pressure setting. – When the supply voltage is reinstated to the correct level, the valve moves from the fail safe mode and the output pressure immediately follows the control signal requirement. The display indicates the actual output pressure. – Note: In the event of loss of both power and inlet pressure the unit will exhaust downstream pressure. • If the P31P / P32P unit has an “E” in the 12th digit of the model number – When the supply voltage drops, the electronic control reverts to “Forced Exhaust Mode” and will automatically exhaust the downstream (regulated) pressure. – When the supply voltage is reinstated to the correct level the unit will return to normal operation and follows the control signal requirement. The display indicates the actual pressure. • If the unit has been programmed in manual mode (not with a control signal) the unit will EXHAUST and the regulator will need to be reset when power is applied. Full exhaust Complete exhaust of the regulator is defined as P2 ≤ 1% Full Scale * Full scale (F.S.) For 2 bar (29 psig) versions this will be 2 bar (29 psig), for the 10 bar (145 psig) version full scale will be 10 bar (145 psig). Degree of protection IP65 EU conformity CE: standard EMC: according to directive 89/336/EEC The new pressure regulator is in accordance with: EN 61000-6-1:2001 EN 61000-6-2:2001 EN 61000-6-3:2001 EN 61000-6-4:2001 These standards ensure that this unit meets the highest level of EMC protection. Mounting position Preferably vertical, with the cable gland on top. Materials: P31P & P32P • Magnet Core .................................................................. Steel • Solenoid Valve Poppet ................................................... FPM • Solenoid Valve Housing .................................Techno Polymer • Regulator Body (P31P & P32P versions) ................Aluminium • Regulator Top Housing .................................................Nylon • Valve Head ....................................................... Brass & NBR • Remaining Seals ............................................................ NBR Settings The regulator is pre-set at the factory. If required, adjustments can be made. Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B55 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators P31P / P32P Series Electronic Proportional Regulators Catalog 0700P-E Global Air Preparation System Pressing the Accept key “acc” for more than 3 seconds, will activate parameter change mode. The user can then select the parameters by pressing up or down key. (display will show Pxx). When parameter number is correct, pressing accept again will enter parameter number.(display will show parameter value). Pressing the up or down key will change the parameter itself. (display will flash indicating parameter editing mode). Pressing the accept key will accept the new parameter value. (all digits will flash whilst being accepted). After releasing all keys , the next parameter number will be presented on the display. (you may step to the next parameter). When no key is pressed, after 3 seconds the display will show the actual output pressure. How to change parameters When the unit is initially powered up allow approximately 10 seconds for the unit to “boot-up” before changing parameter settings. Only parameter numbers 0, 4, 6, 8, 9, 14, 18, 19, 20, 12, 13 and 21 are accessible to edit. All other parameters are fixed. Manual mode: When keys DOWN and UP are pressed during startup, (connecting to the 24V power supply) manual mode is activated. This means that the user is able to in/decrease the output pressure of the regulator, by pressing the UP or DOWN key. During this action the display will blink, indicating that the manual mode is activated. After powering up again, the unit will revert back to normal mode. Back to Factory Setting After start up. (Power is on) Entering this value in parameter 0 will store the calibrated factory data into the working parameters. (Default calibration data is used) or or Parameter Number 0 – Reset Back to Factory Settings Step 1 2 3 4 5 Press 3-6 seconds Until Display Reads Flashing Decimal Flashing Decimal Flashing Description Accesses changeable parameters. Accesses parameter no. 0. Displays current parameter value. Edits parameter. 3 = standard factory settings. If other than 3, use Up or Down Arrow and accept 3 Accepts and saves new parameter setting. Sequences to next parameter. or or Parameter Number 4 – Set Control Signal in Volts or Milliamps Step 1 2 3 4 5 Press 3-6 seconds Until Display Reads Flashing Decimal Flashing Decimal Flashing Description Accesses changeable parameters. Accesses parameter no. 4. Displays current parameter value. 1 = V 0 = mA Edits parameter. Accepts and saves new parameter setting. Sequences to next parameter. Set Control Signal The unit is factory set for 0-10 V control signal. If 4-20 mA control signal is required, change parameter 4. Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B56 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories P31P / P32P Series Electronic Proportional Regulators Catalog 0700P-E Global Air Preparation System or or Parameter Number 6 – Set Output Signal Step 1 2 3 4 5 Press 3-6 seconds Until Display Reads Flashing Decimal Flashing Decimal (Value 0, 1 or 2) Flashing Description Accesses changeable parameters. Accesses parameter no. 6. Displays current parameter value. 1 = m factory default for P3H with analog options Edits parameter. 0 = digital (NPN or PNP) 1 = analog 0..10V 2 = analog 4..20 mA Accepts and saves new parameter setting. Sequences to next parameter. Adjust Span Analog Output Signal Set value is a % of Full Analog range. As an example for a 0-10V output signal, the original factory setting of 100% will give you an adjustment of 0-10V. If you reset Parameter 8 to 50%, the new output range would be 0-5V or 50% of the full range. In the event that the output signal is to low, in a certain application, you can adjust it by increasing Parameter 8 to a maximum value of 130% of scale. Note that all values are nominal and that an actual measurement may be required to ensure signal strength. Set Output Signal Parameter 6 is used to set the type of output signal to your PLC. This parameter is used as follows: Output Signal option “0” = Digital Output – PNP • Factory set at “0” Non Adjustable Output Signal option “P” = Digital PNP or Analog 1-10V • Factory set at “1” for Analog Signal • Convert to Digital PNP by changing parameter to “0” setting Output Signal option “N” = Digital NPN or Analog 1-10V • Factory set at “1” Analog Signal • Convert to Digital NPN by changing parameter to “0” Output Signal option “M” = Analog 4-20 mA • Factory set at “2” Non Adjustable or or Parameter Number 8 – Adjust Span Analog Output Signal Step 1 2 3 4 5 Press 3-6 seconds Until Display Reads Flashing Decimal (For 2 bar versions value = 92) Flashing Decimal (Value between 0 and 130) Flashing Description Accesses changeable parameters. Accesses parameter no. 8. Displays current parameter value. Edits parameter. Accepts and saves new parameter setting and implements the new analog signal span. Sequences to next parameter. Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B57 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators P31P / P32P Series Electronic Proportional Regulators Catalog 0700P-E Global Air Preparation System Adjust Digital Display If necessary, adjustments can be made to the digital display when using an external pressure sensor. or or Parameter Number 9 – Adjust Digital Display Value (Pressure Calibration) Step 1 2 3 4 5 Press 3-6 seconds Until Display Reads Flashing Decimal Flashing Decimal Flashing Description Accesses changeable parameters. Accesses parameter no. 9. Displays current digital display Use up or down arrows and accept to adjust the display value if using an external pressure sensor. Accepts and saves new parameter setting. Sequences to next parameter. Set Pressure Scale Units with NPT port threads are supplied with a factory set psig pressure scale. Use parameter 14 to change scale to bar. or or Parameter Number 14 – Set Pressure Scale in psig or bar Step 1 2 3 4 5 Press 3-6 seconds Until Display Reads Flashing Decimal Flashing Decimal Flashing Description Accesses changeable parameters. Accesses parameter no. 14. Displays current parameter value. 1 = psig 0 = bar 2 = MPA Edits parameter. Accepts and saves new parameter setting. Sequences to next parameter. Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B58 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories P31P / P32P Series Electronic Proportional Regulators Catalog 0700P-E Global Air Preparation System Set Pressure Correction Pressure correction allows the user to set a Maximum pressure as a percentage of secondary pressure F.S. Example: If F.S. is 10 bar, set parameter 19 to 50 for Maximum preset pressure of 5 bar. Pressure correction also affects the Minimum preset pressure in parameter 18. Example: If F.S. is 10 bar and parameter 18 is set to a value of 100 (1 bar), and parameter 19 is set to 50%, then the actual Minimum preset pressure seen is 0.5 bar. Preset Minimum Pressure If there is a need for a pre-set Minimum pressure, use parameter 18. (Note: preset pressure is affected by % P19.) Parameter Number 19 – Set Maximum Preset Pressure Step 1 2 3 4 5 Press 3-6 seconds Until Display Reads Flashing Decimal Flashing Decimal (value between 0 and 100) Flashing Description Accesses changeable parameters. Accesses parameter no. 19. Displays current parameter value. Incremental value is: % of F.S. Edits parameter. Accepts and saves new parameter setting. Sequences to next parameter. or or or or Parameter Number 18 – Set Minimum Preset Pressure Step 1 2 3 4 5 Press 3-6 seconds Until Display Reads Flashing Decimal Flashing Decimal (value between 0 and 200) Flashing Description Accesses changeable parameters. Accesses parameter no. 18. Displays current parameter value. Incremental value is: 2 bar unit: x 2 mbar x % P19 10 bar unit: x 10 mbar x % P19 Edits parameter. Accepts and saves new parameter setting. Sequences to next parameter. Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B59 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators P31P / P32P Series Electronic Proportional Regulators Catalog 0700P-E Global Air Preparation System Set Proportional Band Proportional band is used for setting the reaction sensitivity of the regulator. The displayed value is X 10 mbar and has a range between 50 (0.5 bar) and 250 (2.5 bar). Fine Settings or or Parameter Number 12 – Set Proportional Band (P20 Must be Set to 0) Step 1 2 3 4 5 Press 3-6 seconds Until Display Reads Flashing Decimal Flashing Decimal (value between 50 and 250) Flashing Description Accesses changeable parameters. Accesses parameter no. 12. Displays current parameter value. Incremental value is: x 10 mbar Edits parameter. Accepts and saves new parameter setting. Sequences to next parameter. Behavior Control The regulation speed of the pressure regulator can be modified by means of one parameter. (P 20) The value in this parameter has a range from 0-5. A higher value indicates slower regulation speed, but will be more stable. * When the value 0 is entered, you are able to create your own custom settings true parameters 12, 13 and 21. or or Parameter Number 20 – Set Behavior Control Step 1 2 3 4 5 Press 3-6 seconds Until Display Reads Flashing Decimal Flashing Decimal (value between 0 and 5) Flashing Description Accesses changeable parameters. Accesses parameter no. 20. Displays current parameter value. Edits parameter 0 = custom set* 1 = fastest (narrow proportional band) 2 = fast 3 = normal 4 = slow 5 = slowest (proportional band is broad) Accepts and saves new parameter setting. Sequences to next parameter. Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B60 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories P31P / P32P Series Electronic Proportional Regulators Catalog 0700P-E Global Air Preparation System or Parameter Number 39 – Displays Current Software Version Step 1 2 3 Press 3-6 seconds Until Display Reads Flashing Decimal Description Accesses changeable parameters. Accesses parameter no. 39. Displays current parameter value. XXX = current software version Proportional Effect Parameter Number 21 – Set Proportional Effect (P20 Must be Set to 0) Step 1 2 3 4 5 Press 3-6 seconds Until Display Reads Flashing Decimal Flashing Decimal (value between 5 and 100) Flashing Description Accesses changeable parameters. Accesses parameter no. 21. Displays current parameter value. Edits parameter. 5 = fastest regulation 100 = slowest regulation. Accepts and saves new parameter setting. Sequences to next parameter. or or Set Deadband Deadband is the Minimum limit of accuracy at which the regulator is set for normal operation. The displayed value is X 10 mbar and has a range between 4 (40 mbar) and 40 (400 mbar). or or Parameter Number 13 – Set Deadband (P20 Must be Set to 0) Step 1 2 3 4 5 Press 3-6 seconds Until Display Reads Flashing Decimal Flashing Decimal (value between 4 and 40) Flashing Description Accesses changeable parameters. Accesses parameter no. 13. Displays current parameter value. Incremental value is x 10 mbar Edits parameter. Accepts and saves new parameter setting. Sequences to next parameter. Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B61 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators P31P / P32P Series Electronic Proportional Regulators Catalog 0700P-E Global Air Preparation System Dimensions are in mm (Inches) P31P P32P L-Bracket L-Bracket Foot Bracket 7 (0.28) 7 (0.28) 7 (0.28) 25 (0.98) 15 (0.59) 30 (1.18) 30 (1.18) 36 (1.42) 30 (1.18) 45 (1.77) 15 (0.59) 15 (0.59) 36 (1.42) 15 (0.59) 25 (0.98) 40 (1.57) 84 (3.31) 52 (2.05) 56 (2.20) 26 (1.02) 100 (3.94) 12 (0.47) 52 (2.05) Ø 7 (0.28) 4 holes Foot Bracket 10 (0.39) 12 (0.47) 100 (3.94) 84 (3.31) 40 (1.57) 56 (2.20) 26 (1.02) 52 (2.05) 52 (2.05) Ø 7 (0.28) 4 holes 20 (0.79) 28.6 (1.13) 28.6 (1.13) 175.7 (6.94) 75 (2.96) 37.5 (1.48) 64.4 (2.54) 105.3 (4.16) 57.2 (2.26) 14.3 (0.56) 14.3 (0.56) 4 pin M12 Connector 4 pin M12 Connector 20 (0.79) 126.25 (4.99) 57 (2.25) 28.5 (1.12) 37.25 (1.47) 89 (3.51) 40 (1.58) Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B62 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Catalog 0700P-E Global Air Preparation System P31T, P32T Series Combined Soft Start / Dump Valve Symbol Port size Description Order code† Flow‡ dm3/s (scfm) Max. bar (psig) Height mm (inches) Width mm (inches) Depth mm (inches) Weight 1/4" 120VAC Solenoid & cable plug P31TA92SGNC1FN 17 (36) 10 (150) 115.6 (4.5) 57 (2.2) 40 (1.5) 0.37kg (0.8lbs) 1/4" 24VDC Solenoid & cable plug P31TA92SGNC2CN 17 (36) 10 (150) 166‡ (6.5) 57 (2.2) 40 (1.5) 0.41kg (0.9lbs) 1/4" External air pilot operated P31TA92PPN 17 (36) 17 (250) 115.6 (4.5) 57 (2.2) 40 (1.5) 0.37kg (0.8lbs) 1/2" 120VAC 30mm coil & cable plug included P32TA94SCNA3GN 46 (97) 10 (150) 162.5‡ (6.3) 88 (3.4) 57.2 (2.2) 0.87kg (1.9lbs) 1/2" 24VDC 30mm coil & cable plug included P32TA94SCNA2CN 46 (97) 10 (150) 227.5‡ (8.9) 88 (3.4) 57.2 (2.2) 0.91kg (2.0lbs) 1/2" External air pilot operated P32TA94PPN 46 (97) 17 (250) 162.5‡ (6.3) 75 (2.9) 57.2 (2.2) 0.87kg (1.9lbs) Parker Global Series Combined Soft Start / Dump Valves, provide for the safe introduction of pressure to machines or systems. Soft Start / Dump Valves when set, allow the pressure to gradually build to the set point before fully opening to deliver full flow at line pressure. The controlled introduction of pressure can be an important safety factor and prevent damage to tooling when air pressure is introduced at machine or system start up. To maintain these units in the open position a pilot supply to the air pilot operated version or an electrical signal to the solenoid operated version must be maintained. The valve will automatically dump when the holding signal is removed. Options: ‡ Includes exhaust silencer. Flow with 6.3 bar (91.3) psig) inlet and 1 bar (14.5 psig) pressure drop. † Standard part numbers shown in bold. For other models refer to Options chart above. Combined Soft Start / Dump Valve • Modular design with 1/4" or 1/2" integral ports (NPT, BSPP & BSPT) • Provides for the safe introduction of pressure • The 3-way, 2-position function automatically dumps downstream pressure on the loss of pilot signal • Adjustable slow start • Solenoid or air pilot options • High flow & exhaust capability • Silencer included Solenoid type only Actuator interface G 15mm solenoid (P31 only) C 30mm solenoid P Threaded air pilot Thread type BSPP 1 BSPT 2 NPT 9 Port size Global modular mini (1/4") 2 Global modular compact (1/2") 4 Pilot type P External air pilot S Solenoid pilot Body size Soft start / dump valve (1/4") P31T Soft start / dump valve (1/2") P32T Bold items are most common. Solenoid voltage 2CN 24VDC non locking manual overide 3GN 120VAC non locking manual overide 1FN 120VAC non locking manual override (P31 series only) Solenoid type C 15mm (P31 series only) A 30mm CNOMO coil (P32 only) D 30mm CNOMO coil (M12 connection) (P32 only) Note: P32 unit used for both P32 & P33 series Engr level Current A P31T A 9 2 S G N C 2CN Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B63 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Catalog 0700P-E Global Air Preparation System P31T, P32T Series Combined Soft Start / Dump Valve - + 5 Technical Information Fluid: Compressed air Max. pressure solenoid operated: 10 bar (150 psig) Max. pressure air pilot operated: 17 bar (250 psig) Min. operating pressure: 3 bar (44 psig) Temperature Max.* solenoid operated: -10°C to 50°C (14°F to 122°F) Temperature Max.* air pilot operated: -20°C to 80°C (-4°F to 176°F) Air pilot port: 1/8" Exhaust port: P31T - 1/4" / P32T - 1/2" Typical flow with 6.3 bar inlet pressure and 1 bar P31T 17 dm3/s (36 scfm) pressure drop: P32T 48 dm3/s (101 scfm) * Air supply must be dry enough to avoid ice formation at temperatures below +2°C Snap pressure: Full flow when downstream pressure reaches 50% of the inlet pressure Body: Aluminum Body cover: Polyester Seals: Nitrile NBR Material Specifications 1/4 Soft Start & Dump Valve 1/2 Soft Start & Dump Valve Note: For solenoid operators and cable plugs (connectors) see pages 68 to 69. P31T P32T 1 Start signal 2 3 4 Switching time delay Gradual pressure build up Operating pressure p2 (=p1) Order code Description P31T L-bracket mounting kit P3HKA00ML Foot bracket mounting kit P3HKA00MC Mounting Brackets For mounting brackets see page 52 Dimensions mm (inches) 40 (1.57) 4 (0.15) 24 (0.94) 37 (1.45) 57 (2.24) 84 (3.30) 30.5 (1.20) 136 166(5.35) (6.53) - + 5 64.5 (2.53) 73 (2.87) 227.3 (8.95) 174.5 (6.87) 75 (2.95) 26 (1.02) 6 57.2 (0.23) (2.25) 53 (2.08) 109.5 (4.31) Flow Charts Inlet Pressure - 6.3 bar (91.3 psig) Secondary Pressure - bar Secondary Pressure - (psig) 0 20 40 60 80 100 0 2 3 4 5 6 7 8 1 0 0 5 10 15 20 25 30 35 40 45 50 55 60 Flow - dm3/s Flow - (scfm) 20 40 60 80 100 120 2.5 bar 36.3 psig 4.0 bar 58 psig 6.0 bar 87 psig 6.3 bar 91.4 psig 8.0 bar 116 psig (Revised 09-16-13) Inlet Pressure - 6.3 bar (91.3 psig) Secondary Pressure - bar Secondary Pressure - (psig) 0 20 40 60 80 100 0 2 3 4 5 6 7 8 1 0 0 20 40 60 80 100 120 130 Flow - dm3/s Flow - (scfm) 40 80 120 160 200 240 2.5 bar 36.3 psig 8.0 bar 116 psig 4.0 bar 58 psig 6.3 bar 91.4 psig Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B64 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Catalog 0700P-E Global Air Preparation System P31D, P32D Series Dump Valves Dump Valve Symbol Remotely operated dump valves automatically shut off upstream pressure and exhaust the downstream pressure when the pilot pressure is released. To maintain these units in the open position a pilot supply to the air pilot operated version or an electrical signal to the solenoid operated version must be maintained. The valve will automatically dump when the holding signal is removed. Port size Description Order code† Flow dm3/s (scfm) Max. bar (psig) Height mm (inches) Width mm (inches) Depth mm (inches) Weight 1/4" 120VAC Solenoid & cable plug P31DA92SGNC1FN 17 (36) 10 (150) 115.6 (4.5) 57 (2.2) 40 (1.5) 0.37kg (0.8lbs) 1/4" 24VDC Solenoid & cable plug P31DA92SGNC2CN 17 (36) 10 (150) 166‡ (6.5) 57 (2.2) 40 (1.5) 0.41kg (0.9lbs) 1/4" External air pilot operated P31DA92PPN 17 (36) 17 (250) 115.6 (4.5) 57 (2.2) 40 (1.5) 0.37kg (0.8lbs) 1/2" 120VAC 30mm coil & cable plug included P32DA94SCNA3GN 51 (108) 10 (150) 162.5‡ (6.3) 75 (2.9) 57.2 (2.2) 0.69kg (1.5lbs) 1/2" 24VDC 30mm coil & cable plug included P32DA94SCNA2CN 51 (108) 10 (150) 227.5‡ (8.9) 75 (2.9) 57.2 (2.2) 0.91kg (2.0lbs) 1/2" External air pilot operated P32DA94PPN 51 (108) 17 (250) 162.5‡ (6.3) 75 (2.9) 57.2 (2.2) 0.87kg (1.9lbs) Options: • Modular design with 1/4" or 1/2" integral ports (NPT, BSPP & BSPT) • Provides for the safe introduction of pressure • The 3-way, 2-position function automatically dumps downstream pressure on the loss of pilot signal • Solenoid or air pilot options • High flow & exhaust capability • Silencer included ‡ Includes exhaust silencer † Standard part numbers shown in bold. For other models refer to Options chart above. Solenoid type only Actuator interface G 15mm solenoid (P31 only) C 30mm solenoid Thread type BSPP 1 BSPT 2 NPT 9 Port size Global modular mini (1/4") 2 Global modular compact (1/2") 4 Pilot type P External air pilot S Solenoid pilot Body size Dump valve (1/4") P31D Dump valve (1/2") P32D Bold items are most common. Solenoid voltage 2CN 24VDC non locking manual overide 3GN 120VAC non locking manual overide 1FN 120VAC non locking manual override (P31 series only) Solenoid type C 15mm (P31 series only) A 30mm CNOMO coil (P32 only) D 30mm CNOMO coil (M12 connection) (P32 only) Note: P32 unit used for both P32 & P33 series Engr level Current A P31D A 9 2 S G N C 2CN Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B65 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Catalog 0700P-E Global Air Preparation System P31D, P32D Series Dump Valves 1/4 Remote Dump Valve 1/2 Remote Dump Valve For mounting brackets see page 52 Technical Information Fluid: Compressed air Max. pressure solenoid operated: 10 bar (150 psig) Max. pressure air pilot operated: 17 bar (250 psig) Min. operating pressure: 3 bar (44 psig) Temperature Max.* solenoid operated: -10°C to 50°C (14°F to 122°F) Temperature Max.* air pilot operated: -20°C to 80°C (-4°F to 176°F) Air pilot port: 1/8" Exhaust port: P31D - 1/4" / P32D - 1/2" Typical flow with 6.3 bar inlet pressure and 1 bar P31D 17 dm3/s (36 scfm) pressure drop: P32D 51 dm3/s (108 scfm) * Air supply must be dry enough to avoid ice formation at temperatures below +2°C Snap pressure: Full flow when downstream pressure reaches 50% of the inlet pressure Body: Aluminum Body cover: Polyester Seals: Nitrile NBR Material Specifications Order code Description P31D L-bracket mounting kit P3HKA00ML Foot bracket mounting kit P3HKA00MC Mounting Brackets P31D P32D Note: For solenoid operators and cable plugs (connectors) see pages 68 to 69. Dimensions mm (inches) 40 (1.57) 4 (0.15) 24 (0.94) 37 (1.45) 57 (2.24) 84 (3.30) 30.5 (1.20) 136 166 (5.35) (6.53) - + 5 64.5 (2.53) 73 (2.87) 227.3 (8.95) 174.5 (6.87) 75 (2.95) 26 (1.02) 6 57.2 (0.23) (2.25) 53 (2.08) 109.5 (4.31) Flow Charts Inlet Pressure - 6.3 bar (91.3 psig) Secondary Pressure - bar Secondary Pressure - (psig) 0 20 40 60 80 100 0 2 3 4 5 6 7 8 1 0 0 5 10 15 20 25 30 35 40 45 50 55 60 Flow - dm3/s Flow - (scfm) 20 40 60 80 100 120 2.5 bar 36.3 psig 4.0 bar 58 psig 6.0 bar 87 psig 6.3 bar 91.4 psig 8.0 bar 116 psig (Revised 09-16-13) Inlet Pressure - 6.3 bar (91.3 psig) Secondary Pressure - bar Secondary Pressure - (psig) 0 20 40 60 80 100 0 2 3 4 5 6 7 8 1 0 0 20 40 60 80 100 120 130 Flow - dm3/s Flow - (scfm) 40 80 120 160 200 240 2.5 bar 36.3 psig 8.0 bar 116 psig 4.0 bar 58 psig 6.3 bar 91.4 psig Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B66 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Catalog 0700P-E Global Air Preparation System P31S, P32S Series Soft Start Valves Symbol Port size Description Order code† Flow dm3/s (scfm) Max. bar (psig) Height mm (inches) Width mm (inches) Depth mm (inches) Weight 1/4" 120VAC Solenoid & cable plug P31SA92SGNC1FN 17 (36) 10 (150) 115.6 (4.5) 57 (2.2) 40 (1.5) 0.37kg (0.8lbs) 1/4" 24VDC Solenoid & cable plug P31SA92SGNC2CN 17 (36) 10 (150) 166.0 (6.5) 57 (2.2) 40 (1.5) 0.41kg (0.9lbs) 1/4" Internal air pilot operated P31SA92Y0N 17 (36) 17 (250) 115.6 (4.5) 57 (2.2) 40 (1.5) 0.37kg (0.8lbs) 1/4" External air pilot (1/8" threaded) P31SA92PPN 17 (36) 17 (250) 115.6 (4.5) 57 (2.2) 40 (1.5) 0.37kg (0.8lbs) 1/2" 120VAC 30mm coil & cable plug incl. P32SA94SCNA3GN 48 (101) 10 (150) 162.5 (6.3) 88 (3.4) 57.2 (2.28) 0.87kg (1.5lbs) 1/2" 24VDC 30mm coil & cable plug P32SA94SCNA2CN 48 (101) 10 (150) 227.5 (8.9) 88 (3.4) 57.2 (2.28) 0.90kg (2.0lbs) 1/2" Internal air pilot operated P32SA94Y0N 48 (101) 17 (250) 162.5 (6.3) 75 (2.9) 57.2 (2.28) 0.90kg (2.0lbs) 1/2" External air pilot (1/8 threaded) P32SA94PPN 48 (101) 17 (250) 162.5 (6.3) 75 (2.9) 57.2 (2.28) 0.87kg (1.5lbs) Soft Start Valve Parker Global Series Soft Start Valves, provide for the safe introduction of pressure to machines or systems. Soft Start Valves, allow the pressure to gradually build to the set point before fully opening to deliver full flow at line pressure. The controlled introduction of pressure can be an important safety factor and prevent damage to tooling when air pressure is introduced at machine or system start up. Note: Soft Start Valves must be installed downstream of a 3/2 valve with exhaust capability • Modular design with 1/4" or 1/2" integral ports (NPT, BSPP & BSPT) • The 2-way, 2-position function provides for the safe introduction of pressurel • Adjustable slow start • Solenoid or air pilot options • High flow Options: † Standard part numbers shown in bold. For other models refer to Options chart above. Solenoid type only Thread type BSPP 1 BSPT 2 NPT 9 Port size Global modular mini (1/4") 2 Global modular compact (1/2") 4 Body size Soft start (1/4") P31S Soft start (1/2") P32S Bold items are most common. Solenoid voltage 2CN 24VDC non locking manual overide 3GN 120VAC non locking manual overide 1FN 120VAC non locking manual override (P31 series only) Solenoid type C 15mm (P31 series only) A 30mm CNOMO coil (P32 only) D 30mm CNOMO coil (M12 connection) (P32 only) Note: P32 unit used for both P32 & P33 series Engr level Current A P31S A 9 2 S G N C 2CN Actuator interface 0 Internal Pilot G 15mm solenoid (P31 only) C 30mm solenoid P* Threaded air pilot Pilot type P External air pilot S Solenoid pilot Y Internal air pilot Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B67 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Catalog 0700P-E Global Air Preparation System P31S, P32S Series Soft Start Valves - + 5 1/4 Soft Start Valve - + 5 1 Start signal 2 3 4 Switching time delay Gradual pressure build up Operating pressure p2 (=p1) 1/2 Soft Start Valve For mounting brackets see page 52 Technical Information Fluid: Compressed air Max. pressure solenoid operated: 10 bar (150 psig) Max. pressure air pilot operated: 17 bar (250 psig) Min. operating pressure: 3 bar (44 psig) Temperature Max.* solenoid operated: -10°C to 50°C (14°F to 122°F) Temperature Max.* air pilot operated: -20°C to 80°C (-4°F to 176°F) Air pilot port: 1/8" Typical flow with 6.3bar inlet pressure and 1 bar P31S 17 dm3/s (36 scfm) pressure drop: P32S 48 dm3/s (101 scfm) * Air supply must be dry enough to avoid ice formation at temperatures below +2°C Snap pressure: Full flow when downstream pressure reaches 50% of the inlet pressure Body: Aluminum Body cover: Polyester Seals: Nitrile NBR Material Specifications Description Order code P31S L-bracket mounting kit P3HKA00ML Foot bracket mounting kit P3HKA00MC Mounting Brackets P31S P32S Note: For solenoid operators and cable plugs (connectors) see pages 68 to 69. Dimensions mm (inches) 40 (1.57) 37 (1.45) 57 (2.24) 136 (5.35) 166 (6.53) 64.5 (2.53) 88 (3.46) 174.5 (6.87) 75 (2.95) 57.2 (2.25) Flow Charts 109.5 (4.31) Inlet Pressure - 6.3 bar (91.3 psig) Secondary Pressure - bar Secondary Pressure - (psig) 0 20 40 60 80 100 0 2 3 4 5 6 7 8 1 0 0 5 10 15 20 25 30 35 40 45 50 55 60 Flow - dm3/s Flow - (scfm) 20 40 60 80 100 120 2.5 bar 36.3 psig 4.0 bar 58 psig 6.0 bar 87 psig 6.3 bar 91.4 psig 8.0 bar 116 psig (Revised 09-16-13) Inlet Pressure - 6.3 bar (91.3 psig) Secondary Pressure - bar Secondary Pressure - (psig) 0 20 40 60 80 100 0 2 3 4 5 6 7 8 1 0 0 20 40 60 80 100 120 130 Flow - dm3/s Flow - (scfm) 40 80 120 160 200 240 2.5 bar 36.3 psig 8.0 bar 116 psig 4.0 bar 58 psig 6.3 bar 91.4 psig Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B68 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories P33T Series Redundant Safety Exhaust Valve P33T Schematic Symbol Options: Body size Standard P33T Thread type BSPP 1 NPT 9 Solenoid Dual M12 connector without transducer F Triple M12 connector with transducer G Voltage 24VDC with manual override 2CN Port size 3/4" 6 Type Solenoid pilot + gauge R Operator 15mm Solenoid G Mounting Cat 4 w/bracket 4 P33T A 9 6 R G 4 F 2CN Port size Transducer Cv Height mm (inches) Width mm (inches) Depth mm (inches) Weight Inlet Outlet 1 to 2 2 to 3 kg (lb) Part number* 3/4 3/4 w/o transducer 3.7 8.5 273.8 (10.78) 136.0 (5.35) 147.6 (581) 7.3 (16.1) P33TA96RG4F2CN 3/4 3/4 w/ transducer 3.7 8.5 273.8 (10.78) 136.0 (5.35) 147.6 (581) 7.4 (16.3) P33TA96RG4G2CN * NPT port threads. For BSPP threads , replace “9” in the part number with a “1”. Reset port Pressure Switch Exh. Exh. Exh. 2 1 3 1 2 3 • Proven control reliable technology with integrated soft start • Soft start application of air to the system when energized; can be adjusted for slower or faster buildup of system pressure • Rapid exhaust of downstream air when de-energized to remove stored energy and allow safe access • Memory, monitoring, and air flow control functions are integrated into two identical valve elements. Valves lock-out if asynchronous movement of valve elements occurs during actuation or de-actuation, resulting in a residual outlet pressure of less than 1% of supply. • Reset can only be accomplished by the integrated electrical (solenoid) reset. Cannot be reset by removing and re-applying supply pressure. • Basic 3/2 normally closed valve function: Dirt tolerant, wear compensating poppet design for quick response and high flow capacity. • LED indicators of main solenoid operation, reset solenoid operation, and status indicator condition. • Optional transducer for monitoring of downstream pressure in the system. • Dual exhaust silencers included. • Not for use with clutch / brake applications. • For use in conjunction with a safety relay or safety PLC. Catalog 0700P-E Global Air Preparation System (Revised 05-19-14) Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B69 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators P33T Series Technical Information 273.8 (10.78) 16.3 (.64) 145.5 (5.73) 136.0 (5.35) 147.6 (5.81) Adjustable Soft Start Inlet Feedback Pressure Transducer (Optional) Control Signal Outlet (+) Increase Time (-) Decrease Time 41.3 (1.63) - + 5 Manual Reset LED Status Lights SOL.1 SOL.2 RESET STATUS SOL Dimensions mm (inches) Valve Wiring Description Part number Black grill 1834C05-001 Body connector P32KA00CB Cables M12, 5-pin female to flying lead cable, TPE; 2 m (6.6 ft)..................................................... RKC 4.5-2/S1587 M12, 5-pin male to flying lead cable, TPE; 2 m (6.6 ft)......................................................RSC 4.5-2/S1587 Port block kit 1/2 NPT..........................................................................P32KA94CP 3/4 NPT..........................................................................P32KA96CP 1/2 BSPP.......................................................................P32KA14CP 3/4 BSPP.......................................................................P32KA16CP 1/2 BSPT........................................................................P32KA24CP 3/4 BSPT........................................................................P32KA26CP Pressure switch 1227A30-001 Pressure transducer (Optional) 1232H30-001 T-bracket w/ body connector P32KA00MT T-bracket (Fits to body connector or port block) P32KA00MB Silencer(s) 3/4" 5500A5013 Solenoid (Main & reset) 1527B7916-001 Square flush mounting gauge kit, 0-160 psig.................K4511SCR160 Accessories - P33T Series 19.1 (0.75) 9.5 (0.375) 8.6 81.3 (3.2) (0.34) 6.4 (0.25) 11.1 (0.44) 76.2 (3.0) 98.4 (3.875) 8X R 0.13 76.2 (3.0) 76.2 (3.0) R 0.063 46.2 90° (1.82) Angle Mounting Bracket 60% 0% 100% 1 Start signal 2 3 4 Switching time delay Gradual pressure build up Operating pressure p2 (=p1) Pilot Solenoids: According to VDE 0580 Enclosure rating: According to DIN 400 50 IP 65 Connector socket: According to DIN 43650 Form A Three solenoids, rated for continuous duty Standard voltages: 24VDC Power consumption (each solenoid): for primary and reset solenoids: 1.2 Watts on DC Enclosure rating: IP65, IEC 60529 Electrical connection: M12, 5-pin Ambient temperature: 15°F to 122°F (-10°C to 50°C) Media temperature: 40°F to 175°F (4°C to 80°C) Flow media: Compressed Air, Filtered to Minimum 40 Micron Inlet pressure: 30 to 150 PSIG (2 to 10 bar) Pressure switch rating (Status indicator): 5 Amps at 30 Volts DC. Monitoring: Dynamically, cyclically, internally during each actuating and de-actuating movement. Monitoring function has memory and requires an overt act to reset unit after lockout. Mounting orientation: Vertically with pilot solenoids on top Port threads: 3/4 NPT, 3/4 BSPP Control reliable: Category 4 (Cat 4); performance Level e (PLe) in accordance with Machine directive - EN ISO 13849-1 (Certification pending) Note: Mounting bracket and installation screws included and required to install unit in the system. 1 4 3 2 3 4 2 1 5 5 BROWN (+24 Volts DC) BROWN (+24 Volts DC) GRAY (Equip Ground) 5 GRAY Reset WHITE (Sol 2) WHITE (N.O. Status Contact) BLACK (N.C. Status Contact) BLACK (Sol 1) BLUE (Common) BLUE (Common) 1 4 3 2 5-Pin “A” Code Female Connector (Feedback) 5-Pin “A” Code Female Connector (Digital Pressure Transducer Wiring (optional)) 5-Pin “A” Code Male Connector (Control Signal) Input Power + Power Input Digital Output Signal Digital Output 2 Signal Analog Output Signal Catalog 0700P-E Global Air Preparation System (Revised 05-15-14) Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B70 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Catalog 0700P-E Global Air Preparation System (Revised 05-15-14) P33T Series Valve De-actuated (ready-to-run): Valve Actuated: 2 1 EXHAUST ADJUSTING NEEDLE OUTLET INLET 2 1 EXHAUST ADJUSTING NEEDLE OUTLET INLET 60% 0% 100% 1 Start signal 2 3 4 Switching time delay Gradual pressure build up Operating pressure p2 (=p1) SOL.1 SOL.2 RESET STATUS SOL SOL.1 SOL.2 RESET STATUS SOL The flow of inlet air pressure to the inlet chamber of the main valve internals is restricted by a fixed orifice and an adjustable flow control as well as an air piloted 2-way normally closed poppet valve. The flow of inlet air pressure into the crossover passages is restricted by the size of the passage between the stem and the valve body opening. Flow is sufficient to quickly pressurize pilot supply / timing chambers 1 and 2. The inlet poppets prevent air flow from crossover passages into the outlet chamber. Air pressure acting on the inlet poppets and return pistons securely hold the valve elements in the closed position. (Reset adapter omitted for clarity.) The green “Status” LED will be illuminated indicating the valve is operational. Soft Start Function: Energizing the pilot valves simultaneously applies pressure to both pistons, forcing the internal parts to move to their actuated (open) position, where inlet air flow to crossover passages is fully open, inlet poppets are fully open and exhaust poppets are fully closed. The outlet is then pressurized at a rate allowed by the fixed orifice and the adjusted flow control. Once the air pressure in the outlet chamber reaches approximately 60% of inlet pressure, the air piloted 2-way normally closed poppet valve opens fully and the pressure in the inlet, crossovers, outlet, and timing chambers are quickly equalized. The adjustable flow control will control the time it takes for the outlet air pressure to reach approximately 60% of inlet pressure. De-energizing the pilots quickly causes the valve elements to return to the ready-to-run position. Solenoid 1, Solenoid 2 and the green “Status” LED's will be illuminated indicating the valve is operating properly. Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B71 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Catalog 0700P-E Global Air Preparation System (Revised 05-15-14) P33T Series Valve Fault and Lock-out: Valve Reset (electrical or manual): 2 1 EXHAUST ADJUSTING NEEDLE OUTLET INLET 2 1 EXHAUST ADJUSTING NEEDLE OUTLET INLET SOL.1 SOL.2 RESET STATUS SOL SOL.1 SOL.2 RESET STATUS SOL SOL.1 SOL.2 RESET STATUS SOL Inlet Manual Reset Feedback Pressure Transducer (Optional) Control Signal Whenever the valve elements operate in a sufficiently asynchronous manner, either on actuation or de-actuation, the valve will move to a locked-out position. In the locked-out position, one crossover and its related timing chamber will be exhausted, and the other crossover and its related timing chamber will be fully pressurized. The valve element (side 2) that is partially actuated has pilot air available to fully actuate it, but no air pressure on the return piston to fully de-actuate the valve element. Air pressure in the crossover acts on the differential of side 2 stem diameters creating a latching force. Side 1 is in a fully closed position, and has no pilot air available to actuate, but has full pressure on the inlet poppet and return piston to hold the element in the fully closed position. Inlet air flow on side 1 into its crossover is restricted, and flows through the open inlet poppet on side 2, through the outlet into the exhaust port, and from the exhaust port to atmosphere. Residual pressure in the outlet is less than 1% of inlet pressure. The return springs are limited in travel, and can only return the valve elements to the intermediate (locked-out) position. Sufficient air pressure acting on the return pistons is needed to return the valve elements to a fully closed position. The red “Status” LED will be illuminated indicating the valve in fault and lock-out must be reset The reset procedure is as follows: • Remove the electrical signals to the main coils • Ensure there is air supplied to the valve • Energize the reset solenoid for a minimum of 200 ms • Allow a 200 ms delay after de-energizing the reset solenoid and re-energizing the main solenoids The valve will remain in the locked-out position, even if the inlet air supply is removed and re-applied. A remote reset signal must be applied to reset the valve. A momentary, remote electrical signal must be applied to the reset solenoid to apply pressure to the reset pistons in the valve. Actuation of the reset piston physically pushes the main valve elements to their closed position. Inlet air fully pressurizes the crossovers and holds the inlet poppets on seat. Actuation of the reset piston opens the reset poppet, thereby, immediately exhausting pilot supply air, thus, preventing valve operation during reset (Reset adapter added to illustration.). De-actuation of reset pistons causes the reset poppets to close and pilot supply to fully pressurize. Reset air pressure is applied by a 3/2 normally closed solenoid, or a manual push button mounted on the reset adapter in the top valve cover. The green “Status” LED will be illuminated once the valve is reset. Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B72 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Catalog 0700P-E Global Air Preparation System P31, P32, P33 Series Solenoid Operators Solenoid Operators - CNOMO Materials Technical data - Solenoid operators, coil combinations Pilot Valve Body: Polyamide Armature tube: Brass Plunger & core: Corrosion resistant Cr-Ni steel Seals: Fluorocarbon Screws: Stainless steel Coil Encapsualtion material: Thermoplastic as standard Duroplast for M12 connection Transients Interrupting the current through the solenoid coil produces momentary voltage peaks which, under unfavourable conditions, can amount to several hundred times the rated operating voltage. Normally, these transients do not cause problems, but to achieve the Maximum life of relays in the circuit (and particularly of transistors, thyristors and integrated circuits) it is desirable to provide protection by means of voltage-dependent resistors (varistors). All connectors/cable plugs EN175301-803 with LED’s include this type of circuit protection. Solenoid Coils with M12 Connection Solenoid Coils with DIN A or Industrial B Connection Note: Solenoid pilot operators are fitted to the Global range. Order the above part numbers for spares. The operators are supplied with mounting screws and interface ‘O’ rings. Coils and connectors must be ordered separately. Voltage 22mm x 30mm Order code B industrial standard Weight (Kg) 30mm x 30mm Order code DIN 43650A standard Weight (Kg) Direct current 24VDC P2FCB449 0.093 P2FCA449 0.105 Alternative current 110V 50Hz, 120V 60Hz P2FCB453 0.093 P2FCA453 0.105 Voltage Order code Weight (Kg) Direct current 24VDC P2FC6449 0.065 Spare Base Solenoid Pilot Operator CNOMO NC Description Order code non-lock manual override Weight (Kg) Standard Duty P2FP23N4B 0.065 No Override P2FP23N4A 0.065 NC Normal Operator with 22 x 30 standard coil NC Normal Operator with 30 x 30 standard coil Working pressure 0 to 10 bar 0 to 10 bar Ambient temperature -10°C to 60°C * -10°C to 60°C * Power (DC) 4.8W 2.7W Power (AC) 8.5VA 4.9VA Voltage tolerance +/-10% +/-10% Duty cycle 100% 100% Insulation class F F Electric connection B Industrial DIN 43650A Protection IP65 IP65 Approval UL/CSA Working media All neutral media such as compressed air * Limited to 50°C if use with 100% duty cycle Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B73 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Catalog 0700P-E Global Air Preparation System P31, P32, P33 Series Solenoid Operators PS2429BP PS2028BP PS243079BP PS203279BP PS2430J79BP PS2032J79CP PS243083BP PS203283BP PS2430J83BP PS2032J83CP PS294679BP PS294683BP PS2946J79BP PS2946J83BP Solenoid Connectors / Cable Plugs EN175301-803 Description Order code 22mm Form B Industrial Order code 30mm Form A DIN 43650A With standard screw Standard IP65 without flying lead PS2429BP PS2028BP With LED and protection 24VAC/DC PS243079BP PS203279BP With LED and protection 110VAC PS243083BP PS203283BP With cable Standard with 2m cable IP65 PS2429JBP PS2028JCP 24VAC/DC, 2m cable LED and protection IP65 PS2430J79BP PS2032J79CP 110VAC/DC, 2m cable LED and protection IP65 PS2430J83BP PS2032J83CP Solenoid coil dimensions mm (inches) Cable plug dimensions mm (inches) Electrical schematics 22mm Form B Industrial Cable plugs 22 x 30mm 30 x 30mm 30mm DIN 43650A Cable plugs 32 (1.26) 31 (1.22) 31 (1.22) 42 47.5 (1.65) (1.87) 5 (.20) M3 30 (1.18) 31 (1.22) 40 (1.57) 20.8 (.82) 5.5 (.22) 30 (1.18) 30 (1.18) 45 (1.77) 41 (1.61) 31 (1.22) 33 (1.30) 22 (.87) 60 (2.36) 51 (2.01) 22 (.86) 48 (1.89) 36 (1.42) 30 (1.18) 31 (1.22) 22 (.87) 60 (2.36) 52 (2.05) Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B74 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Catalog 0700P-E Global Air Preparation System P31, P32, P33 Series Safety Lockout Valves Features • The Safety Lockout valve is a manually operated, slide-type, 2-position, 3-way valve. In the closed position, downstream air pressure is exhausted to atmosphere. • The valve slide can be locked in the closed position with a customer supplied padlock. • The Safety Lockout valves conform to OSHA #29 CFR part 1910 – control of hazardous energy source (lockout / tagout). • Left to right flow — orange slide • Right to left — yellow slide Slide Valve / Lockout Valve Ordering Information Model type Port size Thread type Flow dm3/s (scfm) Safety Lockout Valve Flow from left to right Safety Lockout Valve Flow from right to left P31 1/4" NPT 47.2 (100) P31VA92LSAN —P32 1/4" NPT 66.5 (141) P32VA92LSAN P32VA92LSBN 3/8" NPT 101.9 (216) P32VA93LSAN P32VA93LSBN 1/2" NPT 128.4 (272) P32VA94LSAN P32VA94LSBN P33 1/2" NPT 136.9 (290) P33VA94LSAN P33VA94LSBN 3/4" NPT 141.6 (300) P33VA96LSAN P33VA96LSBN Specifications Operating temperature P31: -10°C to 65.5°C (14°F to 150°F) P32/P33: -25°C to 65.5°C (-13°F to 150°F) Max. supply pressure 10 bar (150 psig) Port size BSPP / BSPT / NPT 1/4, 3/8, 1/2, 3/4 Weight P31: 0.30 kg (0.66 lbs) P32: 0.34 kg (0.74 lbs) P33: 0.41 kg (0.90 lbs) 42.7 (1.68) 21.3 (0.84) 40 (1.58) 20 (0.79) 30.7 (1.21) 61.2 (2.41) 62.5 (2.46) 41.4 (1.63) Material Specifications Body Zinc Blade Acetal Seals Nitrile P31 P32 P33 49 (1.93) 24.5 (0.97) 60 (2.36) 30 (1.18) 51 (2.02) 80 (3.19) 80 (3.16) 49 (1.91) 26 (1.03) 58 (2.28) 86 (3.41) 58 (2.28) 29 (1.14) 33 (1.29) 65 (2.58) 58 (2.28) 26 (1.02) 80 (3.14) 50 (1.96) 54 (2.13) For thread type: BSPP 1 BSPT 2 NPT 9 Dimensions mm (inches) Symbol Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B75 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Catalog 0700P-E Global Air Preparation System P31, P32, P33 Series Modular Ball Valves Features The Ball / Lockout Valve shuts off downstream line pressure in the closed position with a 90°turn of the handle. In the closed position, inlet air pressure is blocked and downstream / system air is exhausted through a threaded port. To prevent unauthorized adjustment, the padlock slide may be assembled on either side. It is recommended that this slide is installed after final system assembly. Note: This padlock slide is a permanent assembly and may not be removed later, any unauthorized tampering will void any warranty claims. The valve can only be locked in the closed position. Ordering Information Specifications Operating temperature -40°C to 80°C (-40°F to 176°F) Max. supply pressure 17 bar (250 psig) Port size BSPP / BSPT / NPT 1/4, 3/8, 1/2, 3/4 Weight P31: 0.15 kg (0.33 lbs) P32: 0.36 kg (0.79 lbs) P33: 0.55 kg (1.21 lbs) Material Specifications Body Aluminum Seals PTFE Ball P31 Brass P32 / P33 Chrome plated brass P31 P32 P33 Ball Valve / Lockout Valve 21 (0.82) 20 (0.78) 42 (1.65) 40 (1.57) 71.4 (2.81) 50 (1.96) 21.4 (0.84) 60 (2.36) 30 (1.18) 60 (2.36) 30 (1.18) 88 (3.46) 73 (2.87) 25.4 (1.00) 36.5 (1.43) 73 (2.87) 36.5 (1.43) 73 (2.87) 82.6 (3.25) 98.4 (3.87) 36.5 (1.44) For thread type: BSPP 1 BSPT 2 NPT 9 Dimensions mm (inches) Model type Port size Exhaust port Thread type Flow dm3/s (scfm) Modular ball valve flow from left to right P31 1/4" 1/4" NPT 20 (42.4) P31VA92LBNN P32 3/8" 1/4" NPT 90 (190.7) P32VA93LBNN 1/2" 1/4" NPT 122 (258.5) P32VA94LBNN P33 1/2" 1/2" NPT 265 (561.5) P33VA94LBNN 3/4" 1/2" NPT 320 (678) P33VA96LBNN Symbol Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B76 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Catalog 0700P-E Global Air Preparation System P31, P32, P33 Series Manifold Blocks Features • Available in 1/4" or 3/4" threaded inlet / outlet ports • Two additional top and bottom auxiliary ports standard • Can be mounted anywhere in the FRL system Manifold Blocks Specifications Operating temperature -40°C to 65.5°C (-40°F to 150°F) Max. supply pressure 20.7 bar (300 psig) Weight P31: 0.19 kg (0.26 lbs) P33: 0.34 kg (0.42 lbs) Ordering Information Model type In / Out port size Auxiliary port size top Auxilliary port size bottom Thread type Order code P31 1/4" 1/4" 1/4" NPT P31MA92022N P32 1/2" 1/4" 1/2" NPT P32MA94024N P33 3/4" 1/4" 1/2" NPT P33MA96024N Material Specifications Body Aluminum P31 P32 P33 For thread type: BSPP 1 BSPT 2 NPT 9 Dimensions mm (inches) Inlet Port 3/4" Inlet Port 1/4" Outlet Port 1/4" Top Port 1/4" Top & Bottom Aux. Ports 1/4" Bottom Port 1/2" Outlet Port 3/4" 73 (2.88) 36.5 (1.44) 47.8 (1.88) 23.9 (0.94) 66 (2.60) 40 (1.58) 40 (1.58) 41 (1.61) FLOW 19 (0.74) 42 (1.66) 20 (0.79) 33 (1.30) Inlet Port 1/2" Top Port 1/4" Bottom Port 1/2" Outlet Port 1/2" 60 (2.36) 30 (1.18) 47.8 (1.88) 23.9 (.94) 47.8 (1.88) 23.9 (.94) Symbol Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B77 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Catalog 0700P-E Global Air Preparation System P31 Series Accessories Accessories - P31 Series Port Block Kit w/ T-Bracket (O-ring not shown) 1/8 NPT..................P31KA91CN 1/4 NPT .................P31KA92CN 3/8 NPT..................P31KA93CN 1/8 BSPP................P31KA11CN 1/4 BSPP ...............P31KA12CN 3/8 BSPP................P31KA13CN 1/8 BSPT...............P31KA21CN 1/4 BSPT ..............P31KA22CN 3/8 BSPT...............P31KA23CN 1/8 BSPT................P31KA21CP 1/4 BSPT ...............P31KA22CP 3/8 BSPT................P31KA23CP Port Block Kit (O-ring not shown) 1/8 NPT................. P31KA91CP 1/4 NPT ................ P31KA92CP 3/8 NPT................. P31KA93CP 1/8 BSPP............... P31KA11CP 1/4 BSPP............... P31KA12CP 3/8 BSPP............... P31KA13CP C-Bracket (Fits to filter and lubricator body) P31KA00MW T-Bracket w/ Body Connector (O-ring not shown) P31KA00MT Angle Bracket (Fits to regulator and filter/regulator body) P31KA00MR Body Connector (O-ring not shown) P31KA00CB 68 (2.68) 42.5 (1.67) 10 (.39) 6.6 (.26) 62 (2.44) 60 (2.36) 40 (1.57) 40 (1.57) 2 (.08) 19.3 (.76) 35.5 (1.40) Dia 36 (1.42) 10 (.39) 24 (.94) 7 (.28) 5.5 (.22) 10 (.39) 10 (.39) 16 (.63) 90 (3.54) 68 (2.68) 30 (1.18) Dia. 44 (1.73) 25 (.98) 40 (1.57) Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B78 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Catalog 0700P-E Global Air Preparation System P32 Series Accessories Accessories - P32 Series T-Bracket w/ Body Connector P32KA00MT Body Connector P32KA00CB Port Block Kit 1/4 NPT................... P32KA92CP 3/8 NPT................... P32KA93CP 1/2 NPT................... P32KA94CP 3/4 NPT................... P32KA96CP 1/4 BSPP ............... P32KA12CP 3/8 BSPP................ P32KA13CP 1/2 BSPP................ P32KA14CP 3/4 BSPP................ P32KA16CP 1/4 BSPT............... P32KA22CP 3/8 BSPT............... P32KA23CP 1/2 BSPT............... P32KA24CP 3/4 BSPT............... P32KA26CP T-Bracket (fits to body connector or port block) P32KA00MB Angle Bracket (Fits to regulator and filter/regulator bonnet) P32KA00MR L-Bracket (Fits to filter and lubricator body) P32KA00ML 22.1 (.87) 8.9 (.35) Dia. O-Ring O-Ring 22.1 (.87) 8.9 (.35) Dia. O-Ring 115 (4.53) 25.4 (1.00) 7.5 (.29)(Typ.) 19 (.75) 7.0 (.28) 20 (.79 ) 42 (1.65) 69.5 (2.74) 69.5 (2.74) 25 (98) 40 (1.57) 51 (2.01) 7.1 (.28) 11 (.43) 14 (.55) Dia 69.5 (2.74) 42 (1.66) 72 (2.84) 22 (.88) 28 (1.10) 32 (1.26) 57 (2.25) 7.1 (.28) 9.6 (.38) 14 (.54) Dia 40 (1.57) Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B79 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Catalog 0700P-E Global Air Preparation System P33 Series Accessories Port Block Kit 1/4 NPT................... P32KA92CP 3/8 NPT................... P32KA93CP 1/2 NPT................... P32KA94CP 3/4 NPT................... P32KA96CP 1/4 BSPP ............... P32KA12CP 3/8 BSPP................ P32KA13CP 1/2 BSPP................ P32KA14CP 3/4 BSPP................ P32KA16CP 1/4 BSPT............... P32KA22CP 3/8 BSPT............... P32KA23CP 1/2 BSPT............... P32KA24CP 3/4 BSPT............... P32KA26CP Accessories - P33 Series T-Bracket w/ Body Connector P32KA00MT Body Connector P32KA00CB T-Bracket (fits to body connector or port block) P32KA00MB Angle Bracket (Fits to regulator and filter/regulator bonnet) P33KA00MR L-Bracket (Fits to filter and lubricator body) P33KA00ML 22.1 (.87) 8.9 (.35) Dia. O-Ring O-Ring 22.1 (.87) 8.9 (.35) Dia. O-Ring 40 (1.57) 115 (4.53) 25.4 (1.00) 7.5 (.29)(Typ.) 19 (.75) 7.0 (.28) 20 (.79 ) 76 (2.99) 48 (1.89) 84.5 (3.33) 25 (98) 49 (1.92) 61 (2.40) 61 (2.40) 11 (.43) 14 (.55) Dia 76 (3.00) 48 (1.88) 87 (3.44) 28 (1.10) 28 (1.10) 38 (1.49) 67.5 (2.66) 7.1 (.28) 9.6 (.38) 14 (.56) Dia Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B80 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Catalog 0700P-E Global Air Preparation System P31, P32, P33 Series Kits Set Point Direction R Rising Operation The pressure switch monitors the air pressure in your pneumatic system. When the pressure in your system either drops below or exceeds the set point pressure, an electrical output is given. 3 (Normally Open) 2 (Normally Closed) 1 (Common) Pressure Switch – PPS1 Dimensions Definitions and Terminology Repeatability — Accuracy is the maximum allowable set point deviation of a single pressure or temperature switch under one given set of environmental and operational conditions. Single Pole Double Throw (SPDT) Switching element — A SPDT switching element has one normally open, one normally closed and one common terminal. Three terminals mean that the switch can be wired with the circuit either normally open (NO), or normally closed (NC), or both. Dead Band — The dead band, sometimes referred to as “differential” or “hysterisis”, is the change in pressure between actuation and deactuation set points. 2.30 (58.4) 1.20 (30.5) Max. Ø 1/4-18 NPTF 1-1/8 Hex 18” Leads 1-1/8 Hex 2.50 (63.5) 1.50 (38.1) 1 GND 2 3 Top View DIN Pin Configuration Pin 1 - Common (Black) Pin 2 - N.C. (Blue) Pin 3 - N.O. (Red) Wire Configuration Pin 1 - Common (Black) Pin 2 - N.C. (Blue) Pin 3 - N.O. (Red) Max. 1/8-27 NPT • Long life elastomer diaphragm • High quality snap action switch • Field adjustable • Compact design • Easily customized • Quick delivery • NEMA 4, 13 PPS1 - 1 C 3 - R HM Thread 1/4" NPT male 1 1/8" NPT male 2 1/4" BSPP male 17 1/8" BSPP male 18 Range* 1 3-10 PSI 2 6-30 PSI 3 20-120 PSI 4 100-400 PSI† † Only available in 1/4" NPT Electrical Connection HM DIN 9.4mm WL Wire leads 18" Circuit SPDT C Note: Switch is field adjustable. * Factory setting for calibration purposes Range 1 = 6 PSI Range 2 = 18 PSI Range 3 = 70 PSI Range 4 = 250 PSI Specifications Set point tolerance ±1 PSI or 5% (.07 bar) Temperature range -40F° to 220F° (-40C° to 105C°) Max. operating pressure (Ranges 1, 2, 3) 250 PSI (17.2 bar) Max. operating pressure (Range 4) 2000 PSI (137.9 bar) Deadband 10 - 20% of set pressure Current rating 3A @ 125 VAC 2A @ 30 VDC (Resistive) Circuit form SPDT Standard Cycle life 1 Million Material Specifications Adjustment knob Anodized aluminum Body Brass Options: Diaphragm Nitrile Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B81 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Catalog 0700P-E Global Air Preparation System P31, P32, P33 Series Kits Series Description Order code P31 P32 P33 Panel Mount Nut (Plastic) P31KA00MP P32KA00MP P33KA00MP P31 P32 P33 Panel Mount Nut (Aluminum) P31KA00MM P32KA00MM P33KA00MM P31 P32 P33 5μ Element Kit P31KA00ESE P32KA00ESE P33KA00ESE P31 P32 P33 1μ Element Kit P31KA00ES9 P32KA00ES9 P33KA00ES9 P31 P32 P33 0.01μ Element Kit P31KA00ESC P32KA00ESC P33KA00ESC P31 P32 P33 Adsorber Element Kit P31KA00ESA P32KA00ESA P33KA00ESA P32 / P33 Auto Drain Kit P32KA00DA P31 Differential Pressure Indicator Kit P31KA00RQ P32 / P33 P32KA00RQ P31 P32 / P33 Fill Plug Kit P31KA00PL P32KA00PL P31 / P32 / P33 Drip Control Assembly Kit P32KA00PH P31 P32 P33 Plastic Bowl w/ Bowl Guard & Manual Drain P31KA00BGM P32KA00BGM P33KA00BGM Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B82 B Introduction Combos Filters Coalescers Regulators Filter / Regulators Lubricators Accessories Catalog 0700P-E Global Air Preparation System P31, P32, P33 Series Kits Series Description Order code P31 Plastic Bowl w/ Bowl Guard & Pulse Drain P31KA00BGB P32 P33 Plastic Bowl w/ Bowl Guard & Auto Drain P32KA00BGA P33KA00BGA P31 P32 P33 Metal Bowl w/o Sight Gauge & Manual Drain P31KA00BMM P32KA00BMM P33KA00BMM P31 Metal Bowl w/o Sight Gauge & Pulse Drain P31KA00BMB P32 P33 Metal Bowl w/o Sight Gauge & Auto Drain P32KA00BMA P33KA00BMA P32 P33 Metal Bowl w/ Sight Gauge & Manual Drain P32KA00BSM P33KA00BSM P32 P33 Metal Bowl w/ Sight Gauge & Auto Drain P32KA00BSA P33KA00BSA P31 P32 P33 Lubricator - Plastic Bowl w/ Bowl Guard No Drain P31KA00BGN P32KA00BGN P33KA00BGN P31 P32 P33 Lubricator - Metal Bowl w/o Sight Gauge No Drain P31KA00BMN P32KA00BMN P33KA00BMN P32 P33 Lubricator - Metal Bowl w/ Sight Gauge No Drain P32KB00BSN P33KA00BSN P31 P32 P33 Regulator - Relieving Repair Kit P31KA00RB P32KA00RB P33KA00RB P31 P32 P33 Regulator - Non Relieving Repair Kit P31KA00RC P32KA00RC P33KA00RC Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics B83 B Filter / Regulators Coalescers Filters Combos Introduction Regulators Accessories Lubricators Catalog 0700P-E Global Air Preparation System P31, P32, P33 Series Kits Series Description Connection Order code P31 P32 P33 Regulator - Main Adjusting Spring 0-2 bar (0-30 psig) Kit P31KA00PR P32KA00PR P33KA00PR P31 P32 P33 Regulator - Main Adjusting Spring 0-4.1 bar (0-60 psig) Kit P31KA00PS P32KA00PS P33KA00PS P31 P32 P33 Regulator - Main Adjusting Spring 0-8.6 bar (0-125 psig) Kit P31KA00PT P32KA00PT P33KA00PT P32 P33 Regulator - Main Adjusting Spring 0-17 bar (0-250 psig) Kit P32KA00PV P33KA00PV P31 Square Flush Mounting Gauge Kit 0-4 bar 0-11 bar 0-60 psig 0-160 psig K4511SCR04B K4511SCR11B K4511SCR060 K4511SCR160 P31 1" Round Gauge 0-60 psig / 0-4.1 bar 0-160 psig / 0-10 bar 1/8" 1/8" K4510N18060 K4510N18160 P31 40mm Round Gauge 0-30 psig / 0-2 bar 0-60 psig / 0-4.1 bar 0-160 psig / 0-10 bar 1/8" 1/8" 1/8" K4515N18030 K4515N18060 K4515N18160 P32 / P33 50mm Round Gauge 0-30 psig / 0-2 bar 0-60 psig / 0-4.1 bar 0-160 psig / 0-10 bar 0-300 psig / 0-20 bar 1/4" 1/4" 1/4" 1/4" K4520N14030 K4520N14060 K4520N14160 K4520N14300 P32 / P33 44mm Round Gauge 0-160 psig / 0-10 bar 1/4" K4517N14160D P31 P32 / P33 Body Connector O-ring (Spares kit) (Pack of 10) P31KA00CY P32KA00CY P31 P32 Tamperproof Knob Kit P31KB00AT P32KB00AT 25 (.98) 40 16 (1.57) (.63) 19 (.75) 32 16 (1.25) (.63) 27 (1.06) 15 (.59) 27 (1.06) 24 (.94) 50 18 (1.97) (.71) (Revised 05-13-14) P10 Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics P Safety Guide For Selecting And Using Pneumatic Division Products And Related Accessories WARNING: FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF PNEUMATIC DIVISION PRODUCTS, ASSEMBLIES OR RELATED ITEMS (“PRODUCTS”) CAN CAUSE DEATH, PERSONAL INJURY, AND PROPERTY DAMAGE. POSSIBLE CONSEQUENCES OF FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THESE PRODUCTS INCLUDE BUT ARE NOT LIMITED TO: • Unintended or mistimed cycling or motion of machine members or failure to cycle • Work pieces or component parts being thrown off at high speeds. • Failure of a device to function properly for example, failure to clamp or unclamp an associated item or device. • Explosion • Suddenly moving or falling objects. • Release of toxic or otherwise injurious liquids or gasses. Before selecting or using any of these Products, it is important that you read and follow the instructions below. ! Catalog 0700P-E Air Preparation Products Safety Guide 1. GENERAL INSTRUCTIONS 1.1. Scope: This safety guide is designed to cover general guidelines on the installation, use, and maintenance of Pneumatic Division Valves, FRLs (Filters, Pressure Regulators, and Lubricators), Vacuum products and related accessory