aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Fluoropolymer Hose & Fittings Products PAGE Product Line, Flexible Braided Hose Catalog 5162F PAGE “Traditional” Hose & Fittings PAGE “Industrial” Hose & Fittings HOSE HOSE Smooth, True-Bore PTFE Hose STW/STB 13 Smoothbore .030 Wall S30/S30B 38 Page-Flex® SBF SBFW/SBFB 14 Smoothbore .040 Wall S40/S40B 39 Convoluted PTFE Hose SCW/SCB 15 High Pressure, up to 4,500 psi 944B 40 PCW/PCB 16 High Pressure 5,500 psi 955B 41 NCW/NCB 17 SCWV/SCBV 18 PCWV/PCBV 19 Flare-Seal® SCWV-FS/SCBV-FS 20 PCWV-FS/PCBV-FS 21 Silicone Hose SWPV 23 Rubber Covered Hose RCTW/RCTB 24 TUBING TUBING Platinum Cured Silicone SBP 22 Convoluted Tubing CWV/CBV 25 FITTINGS FITTINGS PAGE Crimp Fittings PAGE Series 27 Crimp Fittings 91N/91 Series 42 PAGE Collars 36 94 Series 51 95 Series 51 Field Attachable Fittings 90 Series 52 OTHER Accessories 58 Technical Help 60 Warranty Statement 76 Offer of Sale 80 Intro Table of Contents see back index for detailed listing Page Page Page 1-10 I Catalog 5162F NOTES We Make Hose Solutions Standard and Custom Designs Whether you are purchasing a standard, off the shelf hose, or a custom design, PARKER PAGE hoses deliver the ultimate in life, flexibility and integrity. In fact, PARKER PAGE International Hose is known in the hose industry as a leader in the design and development of application specific PTFE hoses. Many of our hose solutions have spawned new product lines, such as Page-Flex® SBF, offering a smoothbore flexible hose with the same bend radius of a conventional convoluted hose. ƒƒChemical Resistant ƒƒCorrosion Resistant ƒƒHandles High Temperatures ƒƒNon-Adhesive ƒƒ Easy Cleaning ƒƒ Long Life Expectancy Features Non Conductive & Conductive Some applications require conductivity of the tube in order to dissipate static build up. PARKER PAGE International offers a full range of smooth bore and convoluted hoses with non-conductive (natural) and conductive (black) inner core to meet today’s most demanding applications. Industrial grade conductivity meets a minimum conductance of 20 micro amps with 1,000 vdc applied over a 14” length. 1 Catalog 5162F We make Custom Hoses to your specifications everyday. We Make Hose Solutions Standard and Custom Designs (cont.) Parker PAGE hoses are available in a True Bore design and in standard nominal size hoses. The first section of this catalog, with blue tables, consist of the True Bore products and fittings. The second section, with red tables, consist of industrial PTFE hoses and fittings. Fittings for these two products are not interchangeable. PARKER PAGE TRUE BORE Smoothbore PTFE hose has a larger inside diameter (I.D.) than a traditional, nominal hose. The increased I.D. speeds up the flow of the media traveling through the tube; in most cases, hoses carry up to 15% more flow. True Bore Smoothbore Features ƒƒCarries 15% more flow ƒƒ Excellent chemical compatability ƒƒResists moisture ƒƒ Low friction minimizes pressure drops and deposits Options ƒƒNatural (non-conductive) or black (conductive-static dissipating) ƒƒBraiding – Stainless Steel ƒƒAvailable with double Stainless braid to handle increased pressures ƒƒ Protective/Identifying Sleeving – Fire Sleeve, Heat Shrink and Hose Guards Page 13 Parker PAGE Industrial S30 and S40 hoses look exactly like a True Bore Hose but the inside diameter of the hose is smaller in order to facilitate a Field Attachable Fitting. Industrial Smoothbore Features ƒƒ Excellent chemical compatability ƒƒResists moisture ƒƒ Low friction minimizes pressure drops and deposits ƒƒCan be used with field attachable fittings Options ƒƒNatural (non-conductive) or black (conductive-static dissipating) ƒƒAvailable in heavy wall, (33% more PTFE) for greater kink resistance and reduced permeation ƒƒBraiding – Stainless Steel ƒƒ Protective/Identifying Sleeving – Fire Sleeve, Heat Shrink and Hose Guards Page 42 2 Flare-Seal® PARKER PAGE Flare-Seal® PTFE hose products are designed and manufactured to provide the ultimate in high purity, corrosion/chemical resistance and sanitary applications. The unique benefit offered by a PARKER PAGE Flare-Seal hose is that the PTFE hose liner actually passes through the inside of the fitting and is then flared over the face of the fitting. This special process eliminates the problem of bacterial entrapment and adds the benefit of unrestricted flow by providing 100% PTFE coverage on all wetted surfaces. Flare-Seal products can be provided with flanged ends or sanitary tri-clamp end connections. Features ƒƒ Flare Seal fitting – Continuous PTFE through fitting; no area for bacterial entrapment ƒƒSeamless inner-core ƒƒUninterrupted flow ƒƒ Excellent chemical compatibility ƒƒ Easy Cleaning ƒƒNon Adhesive Options ƒƒNatural (non-conductive) or black (conductive-static dissipating) ƒƒ Flanged ends or sanitary tri-clamp connections ƒƒBraiding – Stainless Steel or Polypropylene Special non-metallic braids of Nomex®, KEVLAR®, Kynar®, polyester and many others are available upon request. Convoluted PARKER PAGE International designs and manufactures high quality seamless convoluted hoses that are open pitched and self draining. Standard seamless PTFE braided hoses are extremely lightweight, flexible and kink resistant. PARKER PAGE Convoluted Fluoropolymer PTFE hoses are less susceptible to cracking from stress or flexing than metal hoses or other fluoropolymer hoses when used within designated operating parameters. Features ƒƒSeamless ƒƒOpen-pitched ƒƒSelf draining ƒƒ Excellent chemical compatibility ƒƒ Easy Cleaning ƒƒNon Adhesive Options ƒƒNatural (non-conductive) or black (conductivestatic dissipating) ƒƒBraiding – Stainless Steel or Polypropylene ƒƒ Protective/Identifying Sleeving – Fire Sleeve, Heat Shrink and Hose Guards ƒƒAvailable as tube assembly without braid Page 15 Kynar® is a registered trademark of Elf Autochem, Nomex® and Kevlar® are registered trademarks of Dupont. 3 Catalog 5162F Specialty braiding or patterns Fire Retardent Sleeving Custom fittings Platinum Cured Silicone Features ƒƒ Easy to clean ƒƒCover promotes safe operator handling Options ƒƒAvailable with double braid ƒƒ Page 23 —FDA 21 CFR 177.2600 —USP Class VI Requirements —ISO 10993 Sections 5, 6 10, 11 —3A Standards —USDA Standards As a compliment to our successful Fluoropolymer and Sanitary Food Grade Hoses, PARKER PAGE offers Platinum Cured Silicone Products. These high quality hoses continue our tradition of total customer satisfaction. PARKER PAGE Fluoropolymer and Platinum Cured hoses meet or exceed the following requirements: Specialty Hoses ƒƒ PAGE-flex® SBF – 1/2” the bend radius of conventional smoothbore hose – Page 14 ƒƒ EPDM Rubber Covered Hose – Page 24 ƒƒNomex Braided Hose – Page 17 ƒƒHigh Pressure Hose – Page 44 PARKER PAGE is recognized as a world leader in the design and manufacture of custom hoses and fittings. Supreme flexibility, superior bend radius, improved vacuum resistance and increased hose life are just a few of the improvements we have made in our hoses over the last couple of years. As demands in the industry change, so do our products. Our engineers are continually surveying the market and creating specialty hoses and fittings to ensure our customers success. Specialty Hoses 4 We Make Hose Solutions Standard and Custom Designs Size Code Fitting Code Fitting Material Accessory Code 3/16″ 1/4″ 03 04 Industrial Thread 304 Stainless (SS 304) 316 Stainless (SS 316) 4 6 None Male Pipe NPT Hex 03 Spring Guard S 5/16″ 3/8″ 05 06 Female Pipe NPT Hex Male Pipe NPT Step Down 06 13 316 Stainless (SS 15Ra) Electropolished to 15Ra E Armor Guard End Bend Restrictors A E 1/2″ 5/8″ 08 10 Male Pipe NPT Step Up Male Union Step Up 23 34 Carbon Steel PFA Encapsulated C T Fire Sleeve Rubber Sleeve F H 3/4″ 7/8″ 12 14 Male Union Step Down JIC Female Swivel 35 30 Hastelloy Monel H M FEP Heat Shrink Polyolefin Heat Shrink T P 1″ 1-1/4″ 16 20 Male JIC 37° JIC Female Step Up 31 32 Silicone Sleeve Vacuum Spring Wire M W 1-1/2″ 2″ 24 32 Male Union Female Union 33 36 Specials X 2-1/2″ 3″ 40 48 Female NPSH Female ORFS Swivel 27 80 4″ 64 Male ORFS 81 Male O-ring Boss 86 Flanges Flange Retainer 05 Flare-Seal® Flange Retainer 29 Cam Lock Female Cam Lock 07 With Locking Handles 17 Male Cam Lock 08 Sanitary Sanitary Tri Clamp Sanitary Tri Clamp 45° 40 4K Sanitary Tri Clamp 90° Sanitary 1-Step Up 4L 4A Sanitary 2-Step Up Sanitary 3-Step Up 4B 4C Sanitary Flare Seal™ Sanitary Mini 4F 42 Sanitary Mini Step Up I-Line Male 43 48 I-Line Female Bevel Seat Female 49 45 Bevel Seat Male 46 Tube and Vacuum PAGElok™ Tube Adapter 38 PAGElok™ Tube Compression Fitting 39 Special Ends Standard Cuffed Ends 90 Non Standard Fitting 99 Length in 1/8″ increments Accessory Code 13 C 0 Fitting End 2 Fitting Material End 2 Flange Material 32 J 03 C Size Code Hose Code Z for Double Braid Fitting Material End 1 Fitting End 1 – 0 1 2 0 – Length in Inches Hose Code ACW A CBV BV CWV V KCB RB KCW R NCB MB NCW M PCB NB PCBV PB PCW N PCWV P RCTB GB RCTW G SBFW SBF SCB TB SCBV JB SCW T SCWV J STB SB STW S Flange Material None O Carbon Steel Epoxy Coated D 304SS 316SS 4 6 Kynar K Polypropylene P Non Standard X Example: 32J03C13C0-0120-A Size: 2″ Style: SCWV Braid: 316 SS Single Braid Core: Heavy Wall Open Pitch Convoluted PTFE End 1: 2″ Male Pipe NPT Hex End 2: 2″ Male Pipe NPT Step Down Length: 120″ from end of Male NPT to end of Male Step Down Accessory: Full Length Armor Guard NOTE: Length calculations for PAGE hose assemblies are typically made sealing surface to sealing surface per the NAHAD Fluoropolymer Hose Assembly Specification Guidelines unless otherwise requested by customer at time of order. “True-Bore” & Convoluted Hose Assembly Nomenclature 5 PAGE “True Bore” Nomenclature Catalog 5162F PAGE Industrial S30 & S40 Hose Assembly Nomenclature Length in 1/8″ increments Accessory Code S 68 S 0 Fitting Material End 1 Fitting End 2 Fitting Material End 2 Flange Material X 08 H 10 Assembly Code Size Code Fitting End 1 Hose Code – 0 3 0 0 – Length in Inches Assembly Code Fitting Code Fitting Material Accessory Code Permanently Attached X FA Pipe Thread Fittings Stainless (SS) Brass S B None Male Pipe NPT Hex 10 Spring Guard S Field Attachable Male Pipe NPT Step Up Male Pipe NPT Step Down 15 20 Carbon Steel C Armor Guard End Bend Restrictors A E Male Union Male Union 45° 11 14 Fire Sleeve Rubber Sleeve F H Male Union 90° Male Union Step Up 19 16 FEP Heat Shrink Polyolefin Heat Shrink T P Male Union Step Down Female Pipe NPT Hex 21 55 Silicone Sleeve Internal Spring M I Female Pipe Step Up Female Pipe Step Down 58 59 Vacuum Spring Wire W Specials X Female Union Female Union Step Up 80 84 Female Union Step Down 88 JIC Fittings JIC Female Swivel JIC Female 45° Elbow 68 66 JIC Female 90° Elbow SAE Female Swivel 67 69 SAE Female 45° Elbow SAE Female 90° Elbow 70 71 JIC Female Step Up JIC Female Step Down 64 65 Tube Stub Fittings Tube Stub Tube Stub Step Up 91 93 Tube Stub Step Down SAE Male Compression 95 96 Inverted Flare & Power Trim Fittings Male Straight 76 Size Code 1/8″ 3/16″ 03 04 1/4″ 5/16″ 05 06 13/32″ 1/2″ 08 10 5/8″ 7/8″ 12 16 1-1/8″ 20 Hose Code S30 S S30B SB S40 H S40B HB ZS40 R ZS40B RB 944B 944B 955B 955B Example: X08H10S68S0-0300 Size: 08 (13/32 I.D.) Style: S40 Braid: SS Single Braid Core: Heavy Wall Smoothbore Convoluted PTFE End 1: 1/2″ 316 SS Male NPT End 2: 1/2″ 316 SS Female 37° Seat JIC Swivel Length: 300″ from end of Male Pipe to seat of Female JIC NOTE: Length calculations for PAGE hose assemblies are typically made sealing surface to sealing surface per the NAHAD Fluoropolymer Hose Assembly Specification Guidelines unless otherwise requested by customer at time of order. 6 PAGE S30 & S40 Nomenclature PAGE SBP & SWPV Hose Assembly Nomenclature Size Code Fitting Code Fitting Material 1/4″ 5/16″ 04 05 Industrial Thread 304 Stainless (SS 304) 316 Stainless (SS 316) 4 Male Pipe NPT Hex 03 6 3/8″ 1/2″ 06 08 Female Pipe NPT Hex Male Pipe NPT Step Down 06 13 316 Stainless (SS Electropolished to 15Ra E 3/4″ 1″ 12 16 Male Pipe NPT Step Up Male Union Step Up 23 34 Carbon Steel Teflon Encapsulated C T 1-1/4″ 1-1/2″ 20 24 Male Union Step Down JIC Female Swivel 35 30 Hastelloy Monel H M 2″ 2-1/2″ 32 40 JIC Female Step Up Male Union 32 33 3″ 4″ 48 64 Female Union Female NPSH 36 37 Female ORFS Swivel Male ORFS 80 81 Male O-ring Boss 86 Flanges Flange Retainer Flare-Seal Flange Retainer 05 29 Cam Lock Female Cam Lock With Locking Handles Male Cam Lock 07 17 08 Sanitary Sanitary Tri Clamp Sanitary Tri Clamp 45° 40 4K Sanitary Tri Clamp 90° Sanitary 1-Step Up 4L 4A Sanitary 2-Step Up Sanitary 3-Step Up 4B 4C Sanitary Flare Seal™ Sanitary Mini 4F 42 Sanitary Mini Step Up I-Line Male 43 48 I-Line Female Bevel Seat Female 49 45 Bevel Seat Male 46 Tube and Vacuum PAGElok™ Tube Adapter 38 PAGElok™ Tube Compression Fitting 39 Hose Code SBP C SWPV E Flange Material None O Carbon Steel Epoxy Coated D 304SS 316SS 4 6 Kynar K Polypropylene P Non Standard X – – Length in 1/8″ increments Fitting End 2 Fitting Material End 2 Flange Material Size Code Hose Code Fitting Material End 1 Fitting End 1 Length in Inches Example: 16E4064L60-0060-4 Size: 1″ Style: SWPV Construction: Wrapped Platinum Cured Silicone Hose with SS Vacuum wire End 1: 1″ 316SS Sanitary Tri Clamp Fitting End 2: 1″ 316SS Sanitary Tri Clamp 90° Elbow Fitting Length: 60-1/2″ from end of Straight Tri-Clamp to center line of 90° Elbow Tri-Clamp NOTE: Length calculations for PAGE hose assemblies are typically made sealing surface to sealing surface per the NAHAD Fluoropolymer Hose Assembly Specification Guidelines unless otherwise requested by customer at time of order. PAGE Silicone Products Nomenclature 7 Catalog 5162F EPDM – Ethylene Propylene Diene Monomer Rubber PTFE – Polytetrafluoroethylene PTFE-S – Polytetrafluoroethylene, Static Dissipative FEP – Fluorinated Ethylene Propylene PFA – Perfluoroalkoxy PFA-S – Perfluoroalkoxy, Static Dissipative PP – Polypropylene S – Silicone SS – Stainless Steel Legend Reinforcement Type psi Fluoropolymer Hose Working Pressures Fractional Size 3/16 1/4 5/16 13/32 1/2 5/8 7/8 1-1/8 1/8 1/4 3/8 1/2 5/8 15/64 7/16 29/32 Dash Size -4 -5 -6 -8 -10 -12 -16 -20 -3 -4 -6 -8 -10 psi psi psi psi psi psi psi psi psi psi psi psi psi Wire Braid 944B High Pressure PTFE Hose with staticdissipative core 4500 4500 4500 4500 4500 4000 955B High Pressure PTFE Hose with staticdissipative core 5500 5500 5500 5500 5500 5500 S30 PAGE Ind. PTFE Hose 3000 3000 2500 2000 1750 1500 1000 S30B PAGE Ind. PTFE Hose with staticdissipative core 3000 3000 2500 2000 1750 1500 1000 S40 PAGE Ind. Heavy Wall PTFE Hose 3000 3000 2500 2000 1750 1500 1000 S40B PAGE Ind. Heavy Wall PTFE Hose with static-dissipative core 3000 3000 2500 2000 1750 1500 1000 STW Z-STW* PAGE Heavy Wall PTFE Hose *Double Braid 3000 3000 2000 1750 STB Z-STB* PAGE Heavy Wall PTFE Hose with staticdissipative core *Double Braid 3000 3000 2000 1750 SCW PAGE Convoluted PTFE Hose 1500 1500 1500 SCB PAGE Convoluted PTFE Hose with staticdissipative core 1500 1500 1500 SCWV PAGE Heavy Wall Convoluted PTFE Hose 1500 SCBV PAGE Heavy Wall Convoluted PTFE Hose with static-dissipative core 1500 SCWV-FS PAGE Flare-Seal® PTFE Hose 500 SCBV-FS PAGE Flare-Seal® PTFE Hose with static-dissipative core 500 Fiber NCW PAGE Convoluted PTFE Hose, Nomex Braid NCB PAGE Convoluted PTFE Hose with staticdissipative core, Nomex Braid PCW PAGE Convoluted PTFE Hose, PP Braid 350 350 300 PCB PAGE Convoluted PTFE Hose with staticdissipative core, PP Braid 350 350 300 PCWV PAGE Heavy Wall Convoluted PTFE Hose, PP Braid 300 PCBV PAGE Heavy Wall Convoluted PTFE Hose with static-dissipative core, PP Braid 300 PCWV-FS PAGE Flare-Seal® PTFE Hose, PP Braid 300 PCBV-FS PAGE Flare-Seal® PTFE Hose with static-dissipative core, PP Braid 300 Other RCTW PAGE Rubber Covered EPDM 500 RCTB PAGE Rubber Covered EPDM with staticdissipative core 500 SBFW PAGE Page-Flex® SBF 300 300 SBFB PAGE Page-Flex® SBF with staticdissipative core 300 300 SBP Platinum Cured Braided Silicone 160 150 140 SWPV Platinum Cured 4 Ply Silicone with SS Wire Helix 250 250 CWV Convoluted tubing – no reinforcement 50 *Z indicates double braid. 8 PAGE Hose Working Pressures (psi) contact customer service contact customer service psi Fluoropolymer Construction and Specifications Reinforcement Type 3/4 1 1 1/4 1 1/2 2 2-1/2 3 4 Fractional Size -12 -16 -20 -24 -32 -40 -48 -64 Core Tube Reinforcement Material Cover Material Page # Dash Size psi psi psi psi psi psi psi psi PTFE-S SS Wire — 44 High Pressure PTFE Hose with staticdissipative core 944B Wire Braid PTFE-S SS Wire — 45 High Pressure PTFE Hose with staticdissipative core 955B PTFE SS Wire — 42 PAGE Ind. PTFE Hose S30 PTFE-S SS Wire — 42 PAGE Ind. PTFE Hose with staticdissipative core S30B PTFE SS Wire — 43 PAGE Ind. Heavy Wall PTFE Hose S40 PTFE-S SS Wire — 43 PAGE Ind. Heavy Wall PTFE Hose with static-dissipative core S40B 1000 1000 1200* 1000* 900* PTFE SS Wire — 13 PAGE Heavy Wall PTFE Hose *Double Braid STW Z-STW* 1000 1000 1200* 1000* 900* PTFE-S SS Wire — 13 PAGE Heavy Wall PTFE Hose with staticdissipative core *Double Braid STB Z-STB* 1200 1000 750 650 450 PTFE SS Wire — 15 PAGE Convoluted PTFE Hose SCW 1200 1000 750 650 450 PTFE-S SS Wire — 15 PAGE Convoluted PTFE Hose with staticdissipative core SCB 1200 1000 750 650 450 200 175 150 PTFE SS Wire — 18 PAGE Heavy Wall Convoluted PTFE Hose SCWV 1200 1000 750 650 450 200 175 150 PTFE-S SS Wire — 18 PAGE Heavy Wall Convoluted PTFE Hose with static-dissipative core SCBV 425 350 325 300 250 200 175 150 PTFE SS Wire — 20 PAGE Flare-Seal® PTFE Hose SCWV-FS 425 350 325 300 250 200 175 150 PTFE-S SS Wire — 20 PAGE Flare-Seal® PTFE Hose with static-dissipative core SCBV-FS PTFE Nomex 17 PAGE Convoluted PTFE Hose, Nomex Braid NCW Fiber PTFE-S Nomex 17 PAGE Convoluted PTFE Hose with staticdissipative core, Nomex Braid NCB 250 250 200 200 200 200 200 200 PTFE PP — 16 PAGE Convoluted PTFE Hose, PP Braid PCW 250 250 200 200 200 200 200 200 PTFE-S PP — 16 PAGE Convoluted PTFE Hose with staticdissipative core, PP Braid PCB 250 250 200 200 200 150 125 100 PTFE PP — 19 PAGE Heavy Wall Convoluted PTFE Hose, PP Braid PCWV 250 250 200 200 200 150 125 100 PTFE-S PP — 19 PAGE Heavy Wall Convoluted PTFE Hose with static-dissipative core, PP Braid PCBV 250 250 200 200 200 150 125 100 PTFE PP — 21 PAGE Flare-Seal® PTFE Hose, PP Braid PCWV-FS 250 250 200 200 200 150 125 100 PTFE-S PP — 21 PAGE Flare-Seal® PTFE Hose with static-dissipative core, PP Braid PCBV-FS 500 450 375 375 300 200 200 150 FEP Double Wire Helix EPDM 24 PAGE Rubber Covered EPDM RCTW Other 500 450 375 375 300 200 200 150 PFA-S Double Wire Helix EPDM 24 PAGE Rubber Covered EPDM with staticdissipative core RCTB 250 250 200 PFA Bonded Wire- Silicone-Fiber — 14 PAGE Page-Flex® SBF SBFW 250 250 200 PFA-S Bonded Wire- Silicone-Fiber — 14 PAGE Page-Flex® SBF with staticdissipative core SBFB 100 60 PTFE SS Wire S 22 Platinum Cured Braided Silicone SBP 250 250 250 230 PTFE SS Wire S 23 Platinum Cured 4 Ply Silicone with SS Wire Helix SWPV 50 50 40 40 30 20 15 10 PTFE None — 25 Convoluted tubing – no reinforcement CWV 9 PAGE Hose Construction and Specifications Catalog 5162F contact customer service contact customer service Hose Series Description Crimp Fitting Crimp Collar Crimpers Factory Assembly Only Field Attachable Parkrimp Adjustable Fitting 944B High Pressure PTFE Hose, up to 4,500 psi 94 Series (page 51) – No Factory crimp only Yes Not applicable 955B High Pressure PTFE Hose, 5,500 psi 95 Series (page 51) – No Factory crimp only Yes Not applicable S30/S30B Smoothbore Nominal (0.030 wall) 91N/91 Series (page 43) – Yes COS-K4 with special dies required No 90 Series (page 52) S40/S40B Smoothbore Nominal (0.040 wall) 91N/91 Series (page 43) – Yes COS-K4 with special dies required No Not applicable STW/STB Smoothbore True Bore PAGE Series – Two piece crimp fittings (page 27) ST300 No Yes No Not applicable SCW/SCB Convoluted PAGE Series – Two piece crimp fittings (page 27) SC300 No Yes No Not applicable PCW/PCB Convoluted PAGE Series – Two piece crimp fittings (page 27) PC300 No Yes No Not applicable SBP/SWPV Platinum Cured Silicone PAGE Series – Two piece crimp fittings (page 27) SIL300 No Yes No Not applicable RCTW/RCTB Rubber Covered Fluoropolymer PAGE Series – Two piece crimp fittings (page 27) RC300 No Yes No Not applicable SCWV/SCBV Convoluted Heavy Wall PAGE Series – Two piece crimp fittings (page 27) SC300 No Yes Yes Not applicable PCWV/PCBV Convoluted Heavy Wall PAGE Series – Two piece crimp fittings (page 27) PC300 No Yes Yes Not applicable PAGE Hose Fitting Selection Chart 10 PAGE “True-Bore” HOSE & FITTINGS 11 Catalog 5162F All dimensions nominal – Working pressures and vacuum ratings may vary depending upon end connections and process and temperature parameters. True-Bore Hose Catalog 5162F Visual Index 12 S30 Industrial .030 wall with SS Braid S30B Conductive Industrial .030 wal lwith SS Braid S40 Heavy Wall .040 with SS Braid pg. 42 pg. 42 pg. 43 S40B Conductive Heavy Wall .040 with SS Braid STW “True-Bore” with SS Braid STB Conductive “True-Bore” with SS Braid SBFW PAGE-flex® SBF pg. 43 pg. 13 pg. 13 pg. 14 SBFB Conductive PAGE-flex® SBF SCW Convoluted with SS Braid SCB Conductive Convoluted with SS Braid PCW Convoluted with PP Braid pg. 14 pg. 15 pg. 15 pg. 16 PCB Conductive Convoluted with PP Braid NCW Convoluted with Nomex Braid NCB Conductive Convoluted with Nomex Braid SCWV Heavy Wall Convoluted with SS Braid pg. 16 pg. 17 pg. 17 pg. 18 SCBV Conductive Heavy Wall Convoluted with SS Braid PCWV Heavy Wall Convoluted with PP Braid PCBV Conductive Heavy Wall Convoluted with PP Braid SCWV-FS Flare-Seal® with SS Braid pg. 18 pg. 19 pg. 19 pg. 20 SCBV-FS Conductive Flare-Seal® with SS Braid PCWV-FS Flare-Seal® with PP Braid PCBV-FS Conductive Flare-Seal® with PP Braid SBP Platinum Cured Braided Silicone Tubing pg. 20 pg. 21 pg. 21 pg. 22 SWPV Platinum Cured 4 Ply Silicone w/ SS Helix RCTW EPDM Rubber Covered Natural RCTB EPDM Rubber Covered Conductive CWV Convoluted Tubing pg. 23 pg. 24 pg. 24 pg. 25 CBV Conductive Convoluted Tubing pg. 25 PAGE Product Line PTFE & Specialty All dimensions nominal – Working pressures and vacuum ratings may vary depending upon end connections and process and temperature parameters. STW/STB – “TRUE BORE” Smoothbore PTFE Hose, Stainless Steel Braid Features ƒƒ High temperature hose ƒƒ Excellent chemical compatibility ƒƒ Resists moisture ƒƒ Low friction minimizes pressure drops and deposits Compliances ƒƒ FDA 21 CFR 177.1550 ƒƒ USP Class VI ƒƒ ISO 10993 Sections 5, 6, 10, 11 Construction Tube: STW – Natural FDA Compliant PTFE STB – Black Static-Dissipative PTFE Reinforcement: 304 Stainless Steel braid Operating Parameters Temperature Range: -100°F to +450°F (-73°C to +232°C) Change in length at Max. Working Pressure: +2% to -4% Min. Burst Pressure is 4x Max. Working Pressure at 73°F (23°C) All ratings based on 72°F (23°C) Fittings PAGE Series – page 27 Uses crimp collar ST300 – page 36 Notes “Z” indicates double braid See page 5 for part numbering system Cannot be used with 90 or 91N series fittings Applications/Markets ƒƒ Fluid Handling ƒƒ Chemical Transfer ƒƒ Paint ƒƒ Pharmaceutical ƒƒ Food & Beverage ƒƒ Cosmetics Part Number Nominal I.D. Nominal O.D. Maximum Working Pressure 72˚F/ 23˚C Minimum Bend Radius Vac. Rating Hg./72˚F Weight Permanent Fitting Series Natural Conductive inch mm inch mm psi bar inch mm inch lbs./ft. kg./mtr. 03-STW 03-STB 1/8 3 .25 6 3,000 207 1-1/2 38 28 .05 .08 NA 04-STW 04-STB 1/4 6 .37 9 3,000 207 3 76 28 .08 .13 PAGE 06-STW 06-STB 3/8 10 .51 13 2,000 138 5 127 28 .11 .16 PAGE 08-STW 08-STB 1/2 13 .63 16 1,750 121 6-1/2 165 28 .16 .24 PAGE 12-STW 12-STB 3/4 19 .88 22 1,000 69 8.5 216 28 .20 .30 PAGE 16-STW 16-STB 1 25 1.13 29 1,000 69 12 305 20 .33 .49 PAGE 16Z-STW 16Z-STB 1 25 1.22 31 1,000 69 12 305 20 .56 .83 PAGE 20Z-STW 20Z-STB 1-1/4 32 1.52 38 1,000 69 14 356 18 .68 1.02 PAGE 24Z-STW 24Z-STB 1-1/2 38 1.73 44 900 62 15 381 15 .79 1.18 PAGE lbs 13 Catalog 5162F All dimensions nominal – Working pressures and vacuum ratings may vary depending upon end connections and process and temperature parameters. True-Bore Hose SBFW/SBFB – Page-Flex® SBF Extra Flexible Fluoropolymer Hose Features ƒƒ Half the minimum bend radius of conventional smoothbore products ƒƒ Kink and vacuum resistant ƒƒ Easily cleaned ƒƒ PPIH full line of optional reinforcement types ƒƒ Cooler outside temperatures reduces operator burns ƒƒ Reduces environment temperatures in confined areas ƒƒ Available with white Silicone cover Compliances ƒƒ FDA 21 CFR 177.1550 ƒƒ USP Class VI Certified ƒƒ ISO 10993 Sections 5, 6, 10, 11 Applications/Markets ƒƒ Fluid Handling ƒƒ Chemical Transfer ƒƒ Paint ƒƒ Pharmaceutical ƒƒ Food & Beverage ƒƒ Cosmetics Construction Tube: SBFW – Natural PFA tube SBFB – Black Static-dissipative PFA tube Reinforcement: bonded wire braid – silicone – textile braided composite with 316 Stainless Steel braid Operating Parameters Temperature Range: -65°F to +325°F (-54°C to +163°C) Min. Burst Pressure is 4x Max. Working Pressure at 72°F (23°C) All ratings based on 72°F (23°C) Fittings PAGE Series – page 27 Complete line of standard PPIH crimp fittings Notes Factory-made assemblies only SBFB – Special order only Available with white silicone cover See page 5 for part numbering system Part Number Nominal I.D. Nominal O.D. Maximum Working Pressure 72˚F/ 23˚C Minimum Bend Radius Vac. Rating Hg./72˚F Weight Natural Conductive inch mm inch mm psi bar inch mm inch lbs./ft. kg./mtr. 06-SBFW 06-SBFB 3/8 10 .63 16 300 21 2 51 28 .16 .24 08-SBFW 08-SBFB 1/2 13 .76 19 300 21 2-1/2 64 28 .23 .34 12-SBFW 12-SBFB 3/4 19 1.04 26 250 17 3 76 28 .37 .55 16-SBFW 16-SBFB 1 25 1.29 33 250 17 4 102 28 .54 .80 24-SBFW 24-SBFB 1-1/2 38 1.85 47 200 14 7 178 28 .83 1.23 lbs 14 All dimensions nominal – Working pressures and vacuum ratings may vary depending upon end connections and process and temperature parameters. Specialty SCW/SCB – Convoluted PTFE Hose 316 Stainless Steel Braid Features ƒƒ High temperature hose ƒƒ Excellent corrosion resistance ƒƒ Seamless ƒƒ Open pitch ƒƒ Self draining ƒƒ Withstands extreme flexing ƒƒ Environmentally safe; low effusion ƒƒ Long life expectancy Compliances ƒƒ FDA 21 CFR 177.1550 ƒƒ USP Class VI ƒƒ ISO 10993 Sections 5, 6, 10, 11 Applications/Markets ƒƒ Fluid Handling ƒƒ Chemical Transfer ƒƒ Paint ƒƒ Semiconductor Construction Tube: SCW – Natural FDA Compliant PTFE SCB – Black Static-Dissipative PTFE Reinforcement: 316 Stainless Steel braid Operating Parameters Temperature Range: -100°F to +500°F (-73°C to +260°C) Min. Burst Pressure is 4x Max. Working Pressure at 72°F (23°C) All ratings based on 72°F (23°C) Fittings PAGE Series – page 27 Uses crimp collar SC300 – page 36 Notes Not suggested for steam-cold water cycling applications See page 5 for part numbering system Cannot be used with 90 or 91N series fittings Part Number Nominal I.D. Nominal O.D. Maximum Working Pressure 72˚F/ 23˚C Minimum Bend Radius Vac. Rating Hg./72˚F Weight Permanent Fitting Series Natural Conductive inch mm inch mm psi bar inch mm inch lbs./ft. kg./mtr. 04-SCW 04-SCB 1/4 6 .46 12 1,500 104 3/4 19 28 .08 .11 PAGE 06-SCW 06-SCB 3/8 10 .54 14 1,500 104 1 25 28 .14 .21 PAGE 08-SCW 08-SCB 1/2 13 .72 18 1,500 104 1-1/2 38 28 .16 .23 PAGE 12-SCW 12-SCB 3/4 19 1.02 26 1,200 83 2 51 28 .27 .40 PAGE 16-SCW 16-SCB 1 25 1.31 33 1,000 69 2-1/2 64 28 .37 .55 PAGE 20-SCW 20-SCB 1-1/4 32 1.73 44 750 52 3 76 28 .46 .68 PAGE 24-SCW 24-SCB 1-1/2 38 1.93 49 650 45 3-3/4 95 28 .55 .81 PAGE 32-SCW 32-SCB 2 51 2.42 62 450 31 4-3/4 121 28 .90 1.4 PAGE lbs 15 Catalog 5162F All dimensions nominal – Working pressures and vacuum ratings may vary depending upon end connections and process and temperature parameters. Convoluted Features ƒƒ Personal handling safety ƒƒ Excellent corrosion resistance ƒƒ Seamless ƒƒ Open pitch ƒƒ Self draining ƒƒ Withstands extreme flexing ƒƒ Environmentally safe; low effusion ƒƒ Long life expectancy Compliances ƒƒ FDA 21 CFR 177.1550 ƒƒ USP Class VI ƒƒ ISO 10993 Sections 5, 6, 10, 11 Applications/Markets ƒƒ Fluid Handling ƒƒ Chemical Transfer ƒƒ Paint ƒƒ Pharmaceutical ƒƒ Food & Beverage Construction Tube: PCW – Natural FDA Compliant PTFE PCB – Black Static-Dissipative PTFE Reinforcement: Polypropylene Operating Parameters Temperature Range: 0°F to +212°F (-18°C to +100°C) Min. Burst Pressure is 4x Max. Working Pressure at 72°F (23°C) All ratings based on 72°F (23°C) Fittings PAGE Series – page 27 Uses crimp collar PC300 – page 36 Notes Not suggested for steam-cold water cycling applications See page 5 for part numbering system Cannot be used with 90 or 91N series fittings PCW/PCB – Convoluted PTFE Hose Polypropylene Braid Part Number Nominal I.D. Nominal O.D. Maximum Working Pressure 72˚F/ 23˚C Minimum Bend Radius Vac. Rating Hg./72˚F Weight Permanent Fitting Series Natural Conductive inch mm inch mm psi bar inch mm inch lbs./ft. kg./mtr. 04-PCW 04-PCB 1/4 6 .55 14 350 59 3/4 19 28 .03 .05 PAGE 06-PCW 06-PCB 3/8 10 .64 16 350 59 1 25 28 .06 .09 PAGE 08-PCW 08-PCB 1/2 13 .84 21 300 21 1-1/2 38 28 .15 .22 PAGE 12-PCW 12-PCB 3/4 19 1.15 29 250 17 2 51 28 .18 .27 PAGE 16-PCW 16-PCB 1 25 1.50 38 250 17 2-1/2 64 28 .26 .39 PAGE 20-PCW 20-PCB 1-1/4 32 1.92 49 200 14 3 76 28 .37 .55 PAGE 24-PCW 24-PCB 1-1/2 38 2.12 54 200 14 3-3/4 95 28 .42 .63 PAGE 32-PCW 32-PCB 2 51 2.65 67 200 14 4-3/4 121 28 .56 .83 PAGE lbs 16 All dimensions nominal – Working pressures and vacuum ratings may vary depending upon end connections and process and temperature parameters. Convoluted NCW/NCB Seamless Convoluted PTFE with Nomex Braid Applications/Markets ƒƒ Fluid Handling ƒƒ Chemical Transfer ƒƒ Paint ƒƒ Pharmaceutical ƒƒ Food & Beverage ƒƒ Cosmetics Features ƒƒ Very light weight ƒƒ Superior flexibility ƒƒ Kink and vacuum resistant ƒƒ Eliminates RFI issues ƒƒ Factory assembly only Compliances ƒƒ FDA 21 CFR 177.1550 ƒƒ USP Class VI ƒƒ ISO 10993 Sections 5, 6, 10, 11 Construction Tube: NCW – Natural PTFE tube NCB – Black Static Dissipative PTFE tube Reinforcement: Nomex braid Operating Parameters Temperature Range: -100°F to +400°F (-73°C to +204°C) Min. Burst Pressure is 4x Max. Working Pressure at 72°F (23°C) All ratings based on 72°F (23°C) Fittings PAGE Series – page 27 Uses crimp collar SC300 – page 36 Notes Factory-made assemblies only NCB Conductive (Static Dissipative) tube I.D. surface only NCB Conductive Spec – Must conduct 20 microamps 1000 VDC potential 14” sample See page 5 for part numbering system Part Number Order Size Nominal I.D. Nominal O.D. Maximum Working Pressure 72˚F/23˚C Minimum Bend Radius Vac. Rating Hg./72˚F Weight Natural Conductive inch mm inch mm psi bar inch mm inch lbs./ft. kg./mtr. 04-NCW 04-NCB 1/4 .260 7 .460 12 725 50 1 25 30 .02 .03 06-NCW 06-NCB 3/8 .370 9 .560 14 400 28 1-1/2 38 30 .06 .09 08-NCW 08-NCB 1/2 .500 13 .740 19 280 19 2 51 30 .08 .12 12-NCW 12-NCB 3/4 .750 19 1.010 26 200 14 2-1/2 64 30 .14 .22 16-NCW 16-NCB 1 1.000 25 1.290 33 200 14 4 102 30 .22 .32 lbs 17 Catalog 5162F All dimensions nominal – Working pressures and vacuum ratings may vary depending upon end connections and process and temperature parameters. Specialty SCWV/SCBV Stainless Steel Braid, Heavy Wall Convoluted PTFE Hose Features ƒƒ High temperature hose ƒƒ Open pitch ƒƒThicker wall ƒƒ Handles vaccum applications at elevated temperatures ƒƒ Excellent chemical compatibility ƒƒ Easy Cleaning, Non Adhesive Compliances ƒƒ FDA 21 CFR 177.1550 ƒƒ USP Class VI ƒƒ ISO 10993 Sections 5, 6, 10, 11 Fittings PAGE Series – page 27 Uses crimp collar SC300 – page 36 Notes Factory-made assemblies only Not suggested for steam-cold water cycling applications See page 5 for part numbering system Cannot be used with 90 or 91N series fittings Vacuum wire recommended for 2-1/2, 3 and 4 inch Construction Tube: SCWV – Heavy Wall Natural FDA Compliant PTFE SCBV – Heavy Wall Black Static-dissipative PTFE Reinforcement: 316 Stainless Steel braid Operating Parameters Temperature Range: -100°F to +500°F (-73°C to +260°C) Min. Burst Pressure is 4x Max. Working Pressure at 72°F (23°C) All ratings based on 72°F (23°C) Applications/Markets ƒƒ Fluid Handling ƒƒ Chemical Transfer ƒƒ Paint ƒƒ Semiconductor Part Number Nominal I.D. Nominal O.D. Maximum Working Pressure 72˚F/ 23˚C Minimum Bend Radius Vac. Rating Hg./72˚F Weight Permanent Fitting Series Natural Conductive inch mm inch mm psi bar inch mm inch lbs./ft. kg./mtr. 08-SCWV 08-SCBV 1/2 13 .75 19 1,500 104 2 51 28 .17 .26 PAGE 12-SCWV 12-SCBV 3/4 19 1.04 26 1,200 83 2-3/4 70 28 .33 .49 PAGE 16-SCWV 16-SCBV 1 25 1.25 32 1,000 69 4 102 28 .37 .55 PAGE 20-SCWV 20-SCBV 1-1/4 32 1.66 42 750 52 5-1/2 140 28 .56 .83 PAGE 24-SCWV 24-SCBV 1-1/2 38 1.92 49 650 45 7 178 28 .64 .95 PAGE 32-SCWV 32-SCBV 2 51 2.49 63 450 31 8-1/2 216 28 .84 1.24 PAGE 40-SCWV 40-SCBV 2-1/2 64 3.25 83 200 14 12 305 28 1.52 2.26 PAGE 48-SCWV 48-SCBV 3 76 3.80 97 175 12 14 356 28 1.82 2.71 PAGE 64-SCWV 64-SCBV 4 102 4.76 121 150 10 16 406 28 2.10 3.13 PAGE lbs 18 All dimensions nominal – Working pressures and vacuum ratings may vary depending upon end connections and process and temperature parameters. Convoluted PCWV/PCBV Polypropylene Braid, Heavy Wall Convoluted PTFE Hose Features ƒƒ Personal handling safety ƒƒ Open pitch ƒƒThicker wall ƒƒ Handles vaccum applications at elevated temperatures ƒƒ Excellent chemical compatibility ƒƒ Easy Cleaning, Non Adhesive Compliances ƒƒ FDA 21 CFR 177.1550 ƒƒ USP Class VI ƒƒ ISO 10993 Sections 5, 6, 10, 11 Applications/Markets ƒƒ Fluid Handling ƒƒ Chemical Transfer ƒƒ Paint ƒƒ Pharmaceutical ƒƒ Food & Beverage Construction Tube: PCWV – Heavy Wall Natural FDA Compliant PTFE PCBV – Heavy Wall Black Static-dissipative PTFE Reinforcement: Polypropylene Operating Parameters Temperature Range: 0°F to +212°F (-18°C to +100°C) Min. Burst Pressure is 4x Max. Working Pressure at 72°F (23°C) All ratings based on 72°F (23°C) Fittings PAGE Series – page 27 Uses crimp collar PC300 – page 36 Notes Factory-made assemblies only Not suggested for steam-cold water cycling applications See page 5 for part numbering system Cannot be used with 90 or 91N series fittings Vacuum wire recommended for 2-1/2, 3 and 4 inch Part Number Nominal I.D. Nominal O.D. Maximum Working Pressure 72˚F/ 23˚C Minimum Bend Radius Vac. Rating Hg./72˚F Weight Permanent Fitting Series Natural Conductive inch mm inch mm psi bar inch mm inch lbs./ft. kg./mtr. 08-PCWV 08-PCBV 1/2 13 .81 21 300 21 3 76 28 .14 .20 PAGE 12-PCWV 12-PCBV 3/4 19 1.30 33 250 17 3-1/2 89 28 .22 .32 PAGE 16-PCWV 16-PCBV 1 25 1.44 36 250 17 4-1/2 114 28 .32 .47 PAGE 20-PCWV 20-PCBV 1-1/4 32 1.86 47 200 14 5 127 28 .40 .59 PAGE 24-PCWV 24-PCBV 1-1/2 38 2.10 53 200 14 6 152 28 .49 .73 PAGE 32-PCWV 32-PCBV 2 51 2.66 68 200 14 8-1/2 216 28 .66 .99 PAGE 40-PCWV 40-PCBV 2-1/2 64 3.57 91 150 10 12 305 28 1.21 1.80 PAGE 48-PCWV 48-PCBV 3 76 3.92 100 125 9 14 356 28 1.45 2.16 PAGE 64-PCWV 64-PCBV 4 102 4.92 125 100 7 16 406 28 1.68 2.50 PAGE lbs 19 Catalog 5162F All dimensions nominal – Working pressures and vacuum ratings may vary depending upon end connections and process and temperature parameters. Convoluted SCWV-FS/SCBV-FS – Flare-Seal® Stainless Steel Braid Features ƒƒ Flare Seal fitting – Continuous PTFE through fitting; no area for bacterial entrapment ƒƒ Increased flow ƒƒThicker wall ƒƒ Excellent chemical compatibility ƒƒ Easy Cleaning, Non Adhesive Compliances ƒƒ FDA 21 CFR 177.1550 ƒƒ USP Class VI ƒƒ ISO 10993 Sections 5, 6, 10, 11 Applications/Markets ƒƒ Fluid Handling ƒƒ Chemical Transfer ƒƒ Paint ƒƒ Pharmaceutical ƒƒ Food & Beverage Construction Tube: SCWV -FS- Heavy Wall Natural FDA Compliant PTFE SCBV-FS – Heavy Wall Black Static-dissipative PTFE Reinforcement: 316 Stainless Steel braid Operating Parameters Temperature Range: -100°F to +500°F (-73°C to +260°C) Min. Burst Pressure is 4x Max. Working Pressure at 72°F (23°C) All ratings based on 72°F (23°C) Fittings PAGE Series – page 27 Notes Factory-made assemblies only Not suggested for steam-cold water cycling applications All dimensions nominal See page 5 for part numbering system Cannot be used with 90 or 91N series fittings Part Number Nominal I.D. Nominal O.D. Maximum Working Pressure 72˚F/ 23˚C Minimum Bend Radius Vac. Rating Hg./72˚F Weight Natural Conductive inch mm inch mm psi bar inch mm inch lbs./ft. kg./mtr. 08-SCWV-FS 08-SCBV-FS 1/2 13 .75 19 500 35 2 51 28 .17 .26 12-SCWV-FS 12-SCBV-FS 3/4 19 1.04 26 425 29 2-3/4 70 28 .33 .49 16-SCWV-FS 16-SCBV-FS 1 25 1.25 32 350 24 4 102 28 .37 .55 20-SCWV-FS 20-SCBV-FS 1-1/4 32 1.66 42 325 22 5-1/2 140 28 .56 .83 24-SCWV-FS 24-SCBV-FS 1-1/2 38 1.92 49 300 21 7 178 28 .64 .95 32-SCWV-FS 32-SCBV-FS 2 51 2.49 63 250 17 8-1/2 216 28 .84 1.24 40-SCWV-FS 40-SCBV-FS 2-1/2 64 3.25 83 200 14 12 305 28 1.52 2.26 48-SCWV-FS 48-SCBV-FS 3 76 3.80 97 175 12 14 356 28 1.82 2.71 64-SCWV-FS 64-SCBV-FS 4 102 4.76 121 150 10 16 406 28 2.10 3.13 lbs 20 All dimensions nominal – Working pressures and vacuum ratings may vary depending upon end connections and process and temperature parameters. Flare-Seal PCWV-FS/PCBV-FS – Flare-Seal® Polypropylene Braid Features ƒƒ Flare Seal fitting – Continuous PTFE through fitting; no area for bacterial entrapment ƒƒ Increased flow ƒƒ Personal handling safety ƒƒ Good chemical compatibility ƒƒ Easy Cleaning, Non Adhesive Compliances ƒƒ FDA 21 CFR 177.1550 ƒƒ USP Class VI ƒƒ ISO 10993 Sections 5, 6, 10, 11 Applications/Markets ƒƒ Fluid Handling ƒƒ Chemical Transfer ƒƒ Paint ƒƒ Pharmaceutical ƒƒ Food & Beverage Construction Tube: PCWV-FS – Heavy Wall Natural FDA Compliant PTFE PCBV-FS- Heavy Wall Black Static-dissipative PTFE Reinforcement: Polypropylene Operating Parameters Temperature Range: 0°F to +212°F (-18°C to +100°C) Min. Burst Pressure is 4x Max. Working Pressure at 72°F (23°C) All ratings based on 72°F (23°C) Fittings PAGE Series – page 27 Notes Factory-made assemblies only Not suggested for steam-cold water cycling applications See page 5 for part numbering system Cannot be used with 90 or 91N series fittings Part Number Nominal I.D. Nominal O.D. Maximum Working Pressure 72˚F/ 23˚C Minimum Bend Radius Vac. Rating Hg./72˚F Weight Natural Conductive inch mm inch mm psi bar inch mm inch lbs./ft. kg./mtr. 08-PCWV-FS 08-PCBV-FS 1/2 13 .810 21 300 21 3 76 28 .14 .20 12-PCWV-FS 12-PCBV-FS 3/4 19 1.10 28 250 17 3-1/2 89 28 .22 .32 16-PCWV-FS 16-PCBV-FS 1 25 1.44 36 250 17 4-1/2 114 28 .31 .47 20-PCWV-FS 20-PCBV-FS 1-1/4 32 1.86 47 200 14 5 127 28 .40 .59 24-PCWV-FS 24-PCBV-FS 1-1/2 38 2.10 53 200 14 6 152 28 .49 .73 32-PCWV-FS 32-PCBV-FS 2 51 2.66 68 200 14 8-1/2 216 28 .66 .99 40-PCWV-FS 40-PCBV-FS 2-1/2 64 3.42 87 150 10 12 305 28 1.21 1.80 48-PCWV-FS 48-PCBV-FS 3 76 3.92 100 125 9 14 356 28 1.45 2.16 64-PCWV-FS 64-PCBV-FS 4 102 4.92 125 100 7 16 406 28 1.68 2.50 lbs 21 Catalog 5162F All dimensions nominal – Working pressures and vacuum ratings may vary depending upon end connections and process and temperature parameters. Flare-Seal SBP Platinum Cured Braided Silicone Tubing Features ƒƒ Easy Cleaning ƒƒ Insulates hose for safer operator handling ƒƒ Good chemical compatibility ƒƒ Non Adhesive Compliances ƒƒ FDA 21 CFR 177.2600 ƒƒ USP Class VI ƒƒ ISO 10993 Sections 5, 6, 10, 11 ƒƒ USDA Standards ƒƒ 3A Standards Applications/Markets ƒƒ Fluid Handling ƒƒ Pharmaceutical ƒƒ Food & Beverage Construction Tube: Platinum cured silicone Reinforcement: Textile braid Cover: Platinum cured silicone Operating Parameters Temperature Range: -80°F to +450°F (-62°C to +232°C) Min. Burst Pressure is 4x Max. Working Pressure at 68°F (20°C) All ratings based on 68°F (20°C) Working pressures may vary depending upon end connections and process and temperature parameters. Fittings PAGE Series – page 27 Uses crimp collar SIL300 – page 36 Cannot be used with 90 or 91N/91 series fittings Notes Available with double braid See page 7 for part numbering system Part Number Nominal I.D. Nominal O.D. Maximum Working Pressure 68˚F/ 20˚C Minimum Burst Pressure 68˚F/20˚C Length/Roll Weight Permanent Fitting Series Natural inch mm inch mm psi bar psi bar feet meter lbs./ft. kg./mtr. 04-SBP .250 6 .500 13 160 11.7 575 40 50 15.2 .112 .167 PAGE 06-SBP .375 10 .625 16 150 10.3 550 38 50 15.2 .117 .174 PAGE 08-SBP .500 13 .875 22 140 9.7 420 29 50 15.2 .190 .283 PAGE 12-SBP .750 19 1.125 29 100 6.9 350 24 50 15.2 .326 .486 PAGE 16-SBP 1.000 25 1.405 36 60 4.1 225 16 50 15.2 .404 .602 PAGE lbs 22 All dimensions nominal – Working pressures and vacuum ratings may vary depending upon end connections and process and temperature parameters. Silicone SWPV Platinum Cured 4 Ply Silicone with Stainless Steel Wire Helix Features ƒƒ Easy Cleaning ƒƒ Insulates hose for safer operator handling ƒƒ Good chemical compatibility ƒƒ Non Adhesive Compliances ƒƒ FDA 21 CFR 177.2600 ƒƒ USP Class VI Certified ƒƒ ISO 10993 Sections 5, 6, 10, 11 ƒƒ USDA Standards ƒƒ 3A Standards Applications/Markets ƒƒ Fluid Handling ƒƒ Pharmaceutical ƒƒ Food & Beverage Construction Tube: Platinum cured silicone Reinforcement: Wrapped textile with Stainless Steel wire helix Cover: Platinum cured silicone Operating Parameters Temperature Range: -80°F to +450°F (-62°C to +232°C) Min. Burst Pressure is 4x Max. Working Pressure at 72°F (23°C) All ratings based on 72°F (23°C) Working pressures may vary depending upon end connections and process and temperature parameters. Fittings PAGE Series – page 27 Uses crimp collar SIL300 – page 36 Cannot be used with 90 or 91N/91 series fittings Notes Available with double braid See page 7 for part numbering system Part Number Nominal I.D. Nominal O.D. Maximum Working Pressure 72˚F/ 23˚C Minimum Burst Pressure 72˚F/23˚C Vac. Rating Hg./72˚F Minimum Bend Radius Weight Permanent Fitting Series Natural inch mm inch mm psi bar psi bar inch inch mm lbs./ft. kg./mtr. 08-SWPV .500 13 .900 23 250 17 750 52 30 1-1/2 38 .27 .40 PAGE 12-SWPV .750 19 1.150 29 250 17 750 52 30 2-1/2 64 .37 .55 PAGE 16-SWPV 1.000 25 1.400 36 250 17 750 52 30 3 76 .46 .69 PAGE 24-SWPV 1.500 38 1.900 48 250 17 750 52 30 4 102 .66 .98 PAGE 32-SWPV 2.000 51 2.400 61 230 16 700 48 30 5-1/2 140 .85 1.27 PAGE lbs 23 Catalog 5162F All dimensions nominal – Working pressures and vacuum ratings may vary depending upon end connections and process and temperature parameters. Silicone RCTW/RCTB EPDM Rubber Covered Fluoropolymer Hose Features ƒƒ Personal handling safety ƒƒ Handles full vacuum ƒƒ Good chemical compatibility ƒƒ Easy Cleaning, Non Adhesive Compliances ƒƒ FDA 21 CFR 177.1550 (FEP core tube) ƒƒ USP Class VI Certified ƒƒ ISO 10993 Sections 5, 6, 10, 11 Applications/Markets ƒƒ Food & Beverage ƒƒ Pharmaceutical ƒƒ Fluid Handling ƒƒ Chemical ƒƒ Ground Support ƒƒ Industrial ƒƒ Paint ƒƒ Semiconductor Part Number Nominal I.D. Nominal O.D. Maximum Working Pressure 72˚F/ 23˚C Minimum Bend Radius Vac. Rating Hg./72˚F Weight Permanent Fitting Series Natural Conductive inch mm inch mm psi bar inch mm inch lbs./ft. kg./mtr. 08-RCTW 08-RCTB 1/2 13 .95 24 500 35 2-1/2 64 30 .33 .49 PAGE 12-RCTW 12-RCTB 3/4 19 1.25 32 500 35 3 76 30 .51 .76 PAGE 16-RCTW 16-RCTB 1 25 1.53 39 450 31 4 102 30 .67 1.00 PAGE 20-RCTW 20-RCTB 1-1/4 32 1.74 44 375 26 7 178 30 .72 1.07 PAGE 24-RCTW 24-RCTB 1-1/2 38 2.13 54 375 26 9 229 30 1.10 1.51 PAGE 32-RCTW 32-RCTB 2 51 2.68 68 300 21 10-1/2 267 30 1.54 2.30 PAGE 40-RCTW 40-RCTB 2-1/2 64 3.30 84 200 14 15 381 30 2.07 3.09 PAGE 48-RCTW 48-RCTB 3 76 3.88 99 200 14 18 457 30 2.99 4.46 PAGE 64-RCTW 64-RCTB 4 102 4.98 127 150 10 22-1/2 572 30 4.33 6.46 PAGE lbs Construction Tube: RCTW – Natural FEP tube RCTB – Static-dissipative PFA tube Reinforcement: Double wire helix – multi layered rubber Cover: Textile reinforced EPDM Operating Parameters Temperature Range: -40°F to +300°F (-40°C to +149°C) Decrease working pressure one percent for every 2°F above 212°F. Operating pressures shown are for non-impulse service All ratings based on 72°F (23°C) Fittings PAGE Series – page 27 Uses crimp collar RC300 – page 36 Notes RCTB – Special order only See page 5 for part numbering system Cannot be used with 90 or 91N series fittings 24 All dimensions nominal – Working pressures and vacuum ratings may vary depending upon end connections and process and temperature parameters. Specialty As Manufactured Vacuum Wire on I.D. Vacuum Wire on O.D. 90° Flanged End Standard Cuff Reduced Cuff Specified Flare Expanded Cuff CWV/CBV Fluoropolymer Convoluted Tubing Features ƒƒ Open pitched ƒƒ Self draining ƒƒ Very flexible ƒƒ Multiple cuffing options Compliances ƒƒ FDA 21 CFR 177.1550 ƒƒ USP Class VI ƒƒ ISO 10993 Sections 5, 6, 10, 11 Applications/Markets ƒƒ Fluid Handling ƒƒ Chemical Transfer ƒƒ Paint ƒƒ Pharmaceutical ƒƒ Food & Beverage ƒƒ Semiconductor Construction Tube: CWV: FDA Compliant PTFE CBV: Black Static Dissipative PTFE Operating Parameters Temperature Range: -100°F to +500°F (-73°C to +260°C) Fittings PAGE Series – page 27 Uses crimp collar SC300 – page 36 Notes Bend Radius based on 36” length piece Part Number Order Size Nominal I.D. Maximum O.D. Maximum Working Pressure 72˚F/23˚C Minimum Burst Pressure 72˚F/23˚C Minimum Bend Radius Vac. Rating Hg./72˚F Weight Natural Conductive inch inch mm inch mm psi bar psi bar inch mm inch lbs./ft. kg./mtr. 08-CWV 08-CBV 1/2 .46 12 .700 18 50 3.4 100 6.9 1-1/2 38 30 .09 .13 12-CWV 12-CBV 3/4 .69 18 1.01 26 50 3.4 100 6.9 1-7/8 48 30 .17 .25 16-CWV 16-CBV 1 .85 22 1.51 31 50 3.4 100 6.9 2-1/2 64 30 .18 .27 20-CWV 20-CBV 1-1/4 1.14 29 1.61 41 40 2.8 80 5.5 3-1/8 79 30 .28 .42 24-CWV 24-CBV 1-1/2 1.45 37 1.88 48 40 2.8 80 5.5 3-3/4 95 30 .32 .48 32-CWV 32-CBV 2 1.80 46 2.43 62 30 2.0 60 4.1 4-3/4 120 30 .62 .76 40-CWV 40-CBV 2-1/2 2.50 64 3.21 82 20 1.4 40 2.8 5 127 30 .76 1.13 48-CWV 48-CBV 3 3.00 76 3.75 95 15 1.0 30 2.0 7 178 30 .91 1.35 64-CWV 64-CBV 4 4.00 102 4.75 121 10 0.7 20 1.3 9 229 30 1.05 1.56 lbs 25 Catalog 5162F All dimensions nominal – Working pressures and vacuum ratings may vary depending upon end connections and process and temperature parameters. Specialty NOTES 26 All dimensions nominal – Working pressures and vacuum ratings may vary depending upon end connections and process and temperature parameters. Specialty Smooth True Bore Rubber Covered Fluoropolymer Silicone Hose & Tubing Convoluted Convoluted SS Braid Non-Metallic Braid PAGE Series True Bore Fittings Crimp Fittings Two Piece – 316 Stainless Steel Works on the following hose types: Where applicable, “B” indicates Brass and “C” indicates Carbon Steel and “S” indicates Stainless Steel. For detailed ordering information, contact Customer Service. Features ƒƒNew fitting part numbers follow Parker standard nomenclature ƒƒ Fittings are interchangeable between styles – reduces inventory Options ƒƒApplication specific designs available ƒƒStainless or Carbon Steel PAGE Fitting Nomenclature Example: 08-16SAN-S This example describes a permanent sanitary flange step down, 1/2″ I.D. hose with a 1″ sanitary flange. This fitting is constructed of stainless steel since the designated material is -S. 08-16SAN-S – Hose I.D. (1/2”) 08-16SAN-S – End Size (1”) 08-16SAN-S – End Configuration Code (Sanitary Flange) 08-16SAN-S – PAGE Fitting Material Selection – B = All Brass – C = Carbon Steel – S = Stainless Steel 27 Catalog 5162F PAGE Series Fittings Catalog 5162F Typical Dimensions for Sanitary Fittings Crimp Fittings Sanitary Sizing These actual size drawings are provided to eliminate sizing errors when specifying sanitary fittings. The outside diameter is the same for 1/8”, 1/4”, 3/8”, 1/2” and the 3/4” (mini) styles. For your convenience and ordering accuracy, all of these drawings may be used as sizing I.D. and O.D. patterns. These fittings are ASME-BPE compliant. 28 PAGE Series Fittings Typical Dimensions for Sanitary Fittings Crimp Fittings Sanitary Sizing 29 Catalog 5162F PAGE Series Fittings Catalog 5162F PAGE Fittings Visual Index NOTE: The PAGE fitting call-out does not follow traditional Parker fitting nomenclature. The end size and hose size are reversed. Length calculations for PAGE hose assemblies are typically made sealing surface to sealing surface per the NAHAD Fluoropolymer Hose Assembly Specification Guidelines unless otherwise requested by customer at time of order. 30 PAGE Fittings PERMANENT PAGE Series Permanent NOTE: The PAGE fitting call-out does not follow traditional Parker fitting nomenclature. The end size and hose size are reversed. Length calculations for PAGE hose assemblies are typically made sealing surface to sealing surface per the NAHAD Fluoropolymer Hose Assembly Specification Guidelines unless otherwise requested by customer at time of order. CL-S Female Cam & Groove Part Number Hose I.D. A E inch mm inch mm inch mm 16-16CL-S 1 25 4.2 107 1.44 37 24-24CL-S 1-1/2 38 5.2 132 2.10 53 32-32CL-S 2 51 6.0 152 2.48 63 48-48CL-S 3 76 7.2 183 3.60 91 64-64CL-S 4 102 7.8 198 4.70 119 Construction: Stainless Steel. Note: Also available as encapsulated female cam under part number TEC-S and TECL-S. CL-S Female Cam & Groove E-S Male Cam & Groove FBS-S Female Sanitary Bevel Seat FIL-S Female I-Line® Sanitary FJX-S Female JIC 37° Swivel pg. 30 pg. 31 pg. 31 pg. 31 pg. 33 FORFS-S Female Seal-Lok™ Swivel Short FP-S Female NPTF Pipe Rigid MBS-S Male Sanitary Bevel Seat MIL-S Male I-Line® Sanitary MP-S Male NPTF Pipe Rigid pg. 33 pg. 32 pg. 31 pg. 32 pg. 32 MSAN-S Mini Sanitary Flange PF ANSI Flange PLCF-S Female A-Lok® Compression SAN-S Sanitary Flange & Step Downs SFR-S Flange Retainer pg. 35 pg. 34 pg. 33 pg. 35 pg. 34 TUBE-S A-Lok® Male Stand Pipe-Rigid “V” Notch pg. 34 PAGE Series Fittings PAGE Series Permanent NOTE: The PAGE fitting call-out does not follow traditional Parker fitting nomenclature. The end size and hose size are reversed. Length calculations for PAGE hose assemblies are typically made sealing surface to sealing surface per the NAHAD Fluoropolymer Hose Assembly Specification Guidelines unless otherwise requested by customer at time of order. E-S Male Cam & Groove Part Number Hose I.D. A E inch mm inch mm inch mm 12-12E-S 3/4 19 2.60 66 1.26 32 16-16E-S 1 25 2.91 74 1.44 37 20-20E-S 1-1/4 32 3.64 93 1.78 45 24-24E-S 1-1/2 38 4.03 102 2.10 53 32-32E-S 2 51 4.75 121 2.48 63 48-48E-S 3 76 5.75 146 3.60 91 64-64E-S 4 102 5.88 149 4.70 119 Construction: Stainless Steel. FBS-S Female Sanitary Bevel Seat Part Number Acme Thread Hose I.D. A inch inch mm inch mm 16-16FBS-S 1-1/2-8 1 25 2.74 70 24-24FBS-S 2-8 1-1/2 38 3.41 87 32-32FBS-S 2-1/2-8 2 51 3.94 100 40-40FBS-S 3-8 2-1/2 64 4.37 110 48-48FBS-S 3-1/2-8 3 76 4.85 123 64-64FBS-S 4-5/8-6 4 102 5.24 133 Construction: Stainless Steel. A H E A A D C FIL-S Female I-Line® Sanitary Part Number Hose I.D. A Flange Size C D inch mm Inch mm Inch mm Inch mm 16-16FIL-S 1 25 2.60 66 1.25 32 2.00 51 24-24FIL-S 1-1/2 38 3.43 87 1.76 45 2.00 51 32-32FIL-S 2 51 4.23 107 2.26 57 2.64 67 40-40FIL-S 2-1/2 64 4.42 112 2.76 70 3.31 84 48-48FIL-S 3 76 4.84 123 3.31 84 3.87 98 Construction: Stainless Steel. MBS-S Male Sanitary Bevel Seat Part Number Acme Thread Hose I.D. A inch inch mm inch mm 16-16MBS-S 1-1/2-8 1 25 2.74 70 24-24MBS-S 2-8 1-1/2 38 3.41 87 32-32MBS-S 2-1/2-8 2 51 3.94 100 40-40MBS-S 3-8 2-1/2 64 4.37 110 48-48MBS-S 3-1/2-8 3 76 4.85 123 64-64MBS-S 4-5/8-6 4 102 5.24 133 Construction: Stainless Steel. 31 Catalog 5162F PAGE Series Fittings PAGE Series Permanent NOTE: The PAGE fitting call-out does not follow traditional Parker fitting nomenclature. The end size and hose size are reversed. Length calculations for PAGE hose assemblies are typically made sealing surface to sealing surface per the NAHAD Fluoropolymer Hose Assembly Specification Guidelines unless otherwise requested by customer at time of order. MP-S Male NPTF Pipe-Rigid Part Number Thread Size Hose I.D. A H Hex inch inch mm inch mm inch 04-04MP-S 1/4-18 1/4 6 1.63 41 9/16 06-06MP-S 3/8-18 3/8 10 1.76 45 11/16 08-08MP-S 1/2-14 1/2 13 2.34 59 7/8 12-12MP-S 3/4-14 3/4 19 2.59 66 1-1/8 16-16MP-S 1-11 1/2 1 25 3.00 76 1/3/8 20-20MP-S 1 1/4-11 1/2 1-1/4 32 3.39 86 1-3/4 24-24MP-S 1 1/2-11 1/2 1-1/2 38 3.89 99 2 32-32MP-S 2-11 1/2 2 51 4.58 116 2-1/2 40-40MP-S 2-1/2 8 2-1/2 64 5.28 134 3 48-48MP-S 3-8 3 76 5.93 151 3-3/4 64-64MP-S 4-8 4 102 6.82 173 4-5/8 Construction: Stainless Steel. MIL-S Male I-Line® Sanitary Part Number Hose I.D. A Flange Size C D inch mm Inch mm Inch mm Inch mm 16-16MIL-S 1 13 2.60 66 1.25 32 2.00 51 24-24MIL-S 1-1/2 19 3.43 87 1.76 45 2.00 51 32-32MIL-S 2 25 4.23 107 2.26 57 2.64 67 40-40MIL-S 2-1/2 64 4.42 112 2.76 70 3.31 84 48-48MIL-S 3 76 4.84 123 3.31 84 3.87 98 Construction: Stainless Steel. FP-S Female NPTF Pipe-Rigid Part Number Thread Size Hose I.D. A H Hex inch inch mm inch mm inch 04-04FP-S 1/4-18 1/4 6 1.63 41 3/4 06-06FP-S 3/8-18 3/8 10 1.73 44 7/8 08-08FP-S 1/2-14 1/2 13 2.25 57 1-1/16 12-12FP-S 3/4-14 3/4 19 2.60 66 1-5/16 16-16FP-S 1-11 1/2 1 25 2.85 72 1-5/8 20-20FP-S 1 1/4-11 1/2 1-1/4 32 3.50 89 2 24-24FP-S 1 1/2-11 1/2 1-1/2 38 3.63 92 2-3/8 32-32FP-S 2-11 1/2 2 51 4.25 108 2-7/8 Construction: Stainless Steel. 32 PAGE Series Fittings PAGE Series Permanent NOTE: The PAGE fitting call-out does not follow traditional Parker fitting nomenclature. The end size and hose size are reversed. Length calculations for PAGE hose assemblies are typically made sealing surface to sealing surface per the NAHAD Fluoropolymer Hose Assembly Specification Guidelines unless otherwise requested by customer at time of order. Part Number Thread Size Hose I.D. A C H Hex J Hex inch mm inch mm inch mm inch inch 04-04FORFS-S 9/16-18 1/4 6 1.50 38 .32 8 9/16 11/16 06-06FORFS-S 11/16-16 3/8 10 1.85 47 .32 8 11/16 13/16 08-08FORFS-S 13/16-16 1/2 13 2.00 51 .43 11 13/16 15/16 12-12FORFS-S 1-3/16-12 3/4 19 2.30 58 .57 14 1-1/8 1-3/8 16-16FORFS-S 1-7/16-12 1 25 2.50 64 .58 15 1-3/8 1-5/8 24-24FORFS-S 2-12 1-1/2 38 3.98 101 .59 15 2 2-1/4 Construction: Stainless Steel. NOTE: When measuring overall length to the end of the nut, B+C dimensions must be used to calculate cut-off allowance. Stainless steel fittings must be assembled with Karrykrimp2, PHastkrimp, Superkrimp or Parkimp2. See CrimpSource for more information. FORFS-S Female Seal-Lok® Swivel-Short J H C A FJX-S Female JIC 37° Swivel Part Number Thread Size Hose I.D. A H Hex inch inch mm inch mm inch 04-04FJX-S 7/16-20 1/4 6 1.44 37 9/16 06-06FJX-S 9/16-18 3/8 10 1.65 42 11/16 08-08FJX-S 3/4-16 1/2 13 2.13 54 7/8 12-12FJX-S 1-1/16-12 3/4 19 2.54 65 1-1/4 16-16FJX-S 1-5/16-12 1 25 2.76 70 1-1/2 20-20FJX-S 1-5/8-12 1-1/4 32 3.25 83 2 24-24FJX-S 1-7/8-12 1-1/2 38 3.73 95 2-1/4 32-32FJX-S 2-1/2-12 2 51 4.55 116 2-7/8 40-40FJX-S 3-12 2-1/2 64 4.76 121 3-3/8 Construction: Stainless Steel. A H 37 Part Number Thread Size Hose I.D. A H Hex J Hex inch mm inch mm inch inch 04-04PLCF-S 7/16-20 1/4 6 1.52 39 9/16 9/16 06-06PLCF-S 9/16-20 3/8 10 1.63 41 11/16 11/16 08-08PLCF-S 3/4-20 1/2 13 2.05 52 7/8 7/8 12-12PLCF-S 1-20 3/4 19 2.30 58 1-1/8 1-1/8 16-16PLCF-S 1-5/16-20 1 25 2.57 65 1-3/8 1-1/2 Construction: Stainless Steel. PLCF-S Female A-LOK® Compression (With Nut & Ferrules) A J H 33 Catalog 5162F PAGE Series Fittings NOTE: The PAGE fitting call-out does not follow traditional Parker fitting nomenclature. The end size and hose size are reversed. Length calculations for PAGE hose assemblies are typically made sealing surface to sealing surface per the NAHAD Fluoropolymer Hose Assembly Specification Guidelines unless otherwise requested by customer at time of order. PAGE Series Permanent PF ANSI B16.5 Flange Carbon Steel (Epoxy Coated) 316 Stainless Steel 304 Stainless Steel Flange Diameter A Hose I.D. Bolt Spacing B Flange Flange Flange inch mm inch mm inch mm 08-PF150 08-PF156 08-PF154 3-1/2 89 1/2 13 2-3/8 60 12-PF150 12-PF156 12-PF154 3-7/8 98 3/4 19 2-3/4 70 16-PF150 16-PF156 16-PF154 4-1/4 108 1 25 3-1/8 79 20-PF150 20-PF156 20-PF154 4-5/8 117 1-1/4 32 3-1/2 89 24-PF150 24-PF156 24-PF154 5 127 1-1/2 38 3-7/8 98 32-PF150 32-PF156 32-PF154 6 152 2 51 4-3/4 120 40-PF150 40-PF156 40-PF154 7 178 2-1/2 64 5-1/2 140 48-PF150 48-PF156 48-PF154 7-1/2 191 3 76 6 152 64-PF150 64-PF156 64-PF154 9 229 4 102 7-1/2 191 Note: Also available in 300 lb. flange and other materials. Contact Customer Service for options. SFR-S Flange Retainer Part Number Flange Diameter Hose I.D. A Bolt Spacing E inch mm inch mm inch mm inch mm 08-08SFR-S 3-1/2 89 1/2 13 2.30 58 2-3/8 60 12-12SFR-S 3-7/8 98 3/4 19 2.60 66 2-3/4 70 16-16SFR-S 4-1/4 108 1 25 3.00 76 3-1/8 79 20-20SFR-S 4-5/8 117 1-1/4 32 3.25 83 3-1/2 89 24-24SFR-S 5 127 1-1/2 38 3.65 93 3-7/8 98 32-32SFR-S 6 152 2 51 4.25 108 4-3/4 120 40-40SFR-S 7 178 2-1/2 64 5.00 127 5-1/2 140 48-48SFR-S 7-1/2 191 3 76 5.50 140 6 152 64-64SFR-S 9 229 4 102 7.00 178 7-1/2 191 Construction: Stainless Steel. A E Flange not included TUBE-S A-LOK® Male Standpipe-Rigid with ”V” Notch Part Number Diameter R Hose I.D. A C D H Hex inch inch mm inch mm inch mm inch mm inch 04-04TUBE-S 1/4 1/4 6 1.75 45 .18 5 .66 17 7/16 06-06TUBE-S 3/8 3/8 10 2.06 52 .25 6 .85 2 5/8 08-08TUBE-S 1/2 1/2 13 2.56 65 .34 9 .97 25 3/4 12-12TUBE-S 3/4 3/4 19 2.86 73 .40 10 1.02 26 1-1/8 16-16TUBE-S 1 1 25 3.34 85 .52 13 1.30 33 1-3/8 20-20TUBE-S 1-1/4 1-1/4 32 4.05 10 .50 13 1.75 45 1-3/4 Construction: Stainless Steel. 34 PAGE Series Fittings NOTE: The PAGE fitting call-out does not follow traditional Parker fitting nomenclature. The end size and hose size are reversed. Length calculations for PAGE hose assemblies are typically made sealing surface to sealing surface per the NAHAD Fluoropolymer Hose Assembly Specification Guidelines unless otherwise requested by customer at time of order. PAGE Series Permanent NOTE: The PAGE fitting call-out does not follow traditional Parker fitting nomenclature. The end size and hose size are reversed. Length calculations for PAGE hose assemblies are typically made sealing surface to sealing surface per the NAHAD Fluoropolymer Hose Assembly Specification Guidelines unless otherwise requested by customer at time of order. MSAN-S Mini Sanitary Flange Part Number Hose I.D. A Flange Size D inch mm inch mm inch mm 04-04MSAN-S 1/4 6 1.47 37 .98 25 04-08MSAN-S 1/4 6 1.50 38 .98 25 06-06MSAN-S 3/8 10 1.53 39 .98 25 06-08MSAN-S 3/8 10 1.53 39 .98 25 06-12MSAN-S 3/8 10 1.66 42 .98 25 08-08MSAN-S 1/2 13 1.90 48 .98 25 08-12MSAN-S 1/2 13 1.94 49 .98 25 12-12MSAN-S 3/4 19 2.16 55 .98 25 16-16MSAN-S 1 25 2.27 58 .98 25 Construction: Stainless Steel. Meets ASME-BPE. NOTE: The PAGE fitting call-out does not follow traditional Parker fitting nomenclature. The end size and hose size are reversed. D SAN-S Sanitary Flange & Step-Downs Part Number Hose I.D. A Flange Size D inch mm inch mm inch mm 08-08SAN-S 1/2 13 2.11 54 1.98 50 08-16SAN-S 1/2 13 2.11 54 1.98 50 08-24SAN-S 1/2 13 2.34 59 1.98 50 12-12SAN-S 3/4 19 2.32 59 1.98 50 16-16SAN-S 1 25 2.45 62 1.98 50 12-24SAN-S 3/4 19 2.34 59 1.98 50 16-24SAN-S 1 25 2.32 59 1.98 50 24-24SAN-S 1-1/2 38 3.10 79 1.98 50 24-32SAN-S 1-1/2 38 3.12 79 2.52 64 32-32SAN-S 2 51 3.67 93 2.52 64 40-40SAN-S 2-1/2 64 4.00 102 3.05 77 48-48SAN-S 3 76 4.50 114 3.58 91 64-64SAN-S 4 102 4.75 121 4.68 119 Construction: Stainless Steel. Compliant ASME-BPE. NOTE: The PAGE fitting call-out does not follow traditional Parker fitting nomenclature. The end size and hose size are reversed. D A 35 Catalog 5162F PAGE Series Fittings By Size Hose Collar # Size 04 06 08 12 16 20 24 32 40 48 64 STW STB ST300 ST300 ST300 ST300 ST300 ST300 ST300 ST300 SCW SCB SC300 SC300 SC300 SC300 SC300 SC300 SC300 SC300 SC300 PCW PCB PC300 PC300 PC300 PC300 PC300 PC300 PC300 PC300 PC300 SCWV SCBV SC300 SC300 SC300 SC300 SC300 SC300 SC300 SC300 SC300 SC300 PCWV PCBV PC300 PC300 PC300 PC300 PC300 PC300 PC300 PC300 PC300 PC300 CWV CBV SC300 ST300 ST301 ST300 ST300 ST300 ST301 SC300 SC300 SC300 SBP SIL300 SIL300 SIL300 SIL300 SIL300 SIL300 SWPV SIL300 SIL300 SIL300 SIL300 SIL300 SIL300 SBFW SBFB SBF300 SBF300 SBF300 SBF300 SBF300 SBF300 RCTW RCTB RC300 RC300 RC300 RC300 RC300 RC300 RC300 RC300 RC300 RC300 NCW NCB SC300 SC300 SC300 SC300 SC300 SC300 Inserts & Collars Sold Separately Examples: If you need a Female JIC Swivel Fitting for a 08-SCW Hose (1/2” Convoluted), place an order for (1) 08-08 FJX-S and (1) 08-SC300. If you need a Male Pipe Fitting for a 12-RCTW Hose, place an order for (1) 12-12 MP-S and (1) 12-RC300. Size ST300 SC300 PC300 SBF300 SIL 300 RC300 For use with STW/STB For use with SCW/SCB, SCWV/SCBV, CWV/CBV, NCW/NCB, NCWV/NCBV For use with PCW/PCB, PCWV/PCBV For use with SBFW/SBFB For use with SBP/SWPV For use with RCTW/RCTB 1/4” 04-ST300 04-SC300 04-PC300 — 04-SIL300 — 3/8” 06-ST300 06-SC300 06-PC300 06-SBF300 06-SIL300 — 1/2” 08-ST300 08-SC300 08-PC300 08-SBF300 08-SIL300 08-RC300 3/4” 12-ST300 12-SC300 12-PC300 12-SBF300 12-SIL300 12-RC300 1” 16-ST300 16-SC300 16-PC300 16-SBF300 16-SIL300 16-RC300 1-1/4” 20Z-ST300 20-SC300 20-PC300 — — 20-RC300 1-1/2” — 24-SC300 24-PC300 24-SBF300 24-SIL300 24-RC300 2” — 32-SC300 32-PC300 — 32-SIL300 32-RC300 3” — 48-SC300 48-PC300 — — 48-RC300 4” — 64-SC300 64-PC300 — — 64-RC300 Note: Also available in carbon steel. By Style Collars For Hose with PAGE Series Fittings Parker PAGE fittings are unique because the collars are designed to keep inventory at a minimum. Where possible, collars are designed to fit hoses by size rather than by hose series. This means that a 06-SC300 will work on many convoluted hoses rather than only on one specific series of hose. 36 PAGE Series Fittings 37 Catalog 5162F All dimensions nominal – Working pressures and vacuum ratings may vary depending upon end connections and process and temperature parameters. Nominal Hose Catalog 5162F PAGE INDUSTRIAL HOSE & FITTINGS S30/S30B – Industrial .030” wall PTFE Hose, Stainless Steel Braid Features ƒƒ High temperature hose ƒƒ Excellent chemical compatibility ƒƒ Resists moisture ƒƒ Low friction minimizes pressure drops and deposits Compliances ƒƒ FDA 21 CFR 177.1550 (Natural tube) ƒƒ SAE J517 (100R14) Applications/Markets ƒƒ Fluid Handling ƒƒ Chemical Transfer ƒƒ Paint ƒƒ Pharmaceutical ƒƒ Food & Beverage ƒƒ Cosmetics Construction Tube: S30 – Natural FDA Compliant PTFE S30B – Black Static-Dissipative PTFE Reinforcement: 304 Stainless Steel braid Operating Parameters Temperature Range: -100°F to +450°F (-73°C to +232°C) Change in length at Max. Working Pressure: +2% to -4% Min. Burst Pressure is 4x Max. Working Pressure at 73°F (23°C) All ratings based on 72°F (23°C) Fittings 91N/91 Series – page 43 90 Series – page 52 Notes See page 6 for part numbering system Part Number Nominal I.D. Nominal O.D. Maximum Working Pressure 72˚F/ 23˚C Minimum Bend Radius Vac. Rating Hg./72˚F Weight Permanent Fitting Series Field Attachable Series Natural Conductive inch mm inch mm psi bar inch mm inch lbs./ft. kg./mtr. 04-S30 04-S30B 3/16 5 .305 8 3,000 207 2 51 28 .06 .09 91N 90 05-S30 05-S30B 1/4 6 .375 10 3,000 207 3 76 28 .11 .16 91N 90 06-S30 06-S30B 5/16 8 .430 11 2,500 172 4 102 28 .13 .20 91N 90 08-S30 08-S30B 13/32 10 .535 14 2,000 138 5 127 28 .15 .22 91N 90 10-S30 10-S30B 1/2 13 .636 16 1,750 121 6-1/2 165 28 .19 .28 91N 90 12-S30 12-S30B 5/8 16 .765 19 1,500 103 7-1/2 191 12 .24 .36 91N 90 16-S30 16-S30B 7/8 22 1.030 26 1,000 69 9 229 14 .31 .47 91N 90 lbs 38 All dimensions nominal – Working pressures and vacuum ratings may vary depending upon end connections and process and temperature parameters. Nominal Hose S40/S40B – Industrial .040 wall Heavy Wall PTFE Hose, Stainless Steel Braid Features ƒƒ 33% more PTFE ƒƒ High temperature hose ƒƒ Excellent chemical compatibility ƒƒ Improved kink resistance ƒƒ Decreased gas permeation ƒƒ Low friction minimizes pressure drops and deposits Compliances ƒƒ FDA 21 CFR 177.1550 (Natural tube) Applications/Markets ƒƒ SAE J517 (100R14) ƒƒ Fluid Handling ƒƒ Chemical Transfer ƒƒ Paint ƒƒ Pharmaceutical ƒƒ Food & Beverage ƒƒ Cosmetics Construction Tube: S40 – Natural FDA Compliant PTFE S40B – Black Static-Dissipative PTFE Reinforcement: 304 Stainless Steel braid Operating Parameters Temperature Range: -100°F to +450°F (-73°C to +232°C) Change in length at Max. Working Pressure: +2% to -4% Min. Burst Pressure is 4x Max. Working Pressure at 73°F (23°C) All ratings based on 72°F (23°C) Fittings 91N/91 Series – page 43 Notes See page 6 for part numbering system Part Number Nominal I.D. Nominal O.D. Maximum Working Pressure 72˚F/ 23˚C Minimum Bend Radius Vac. Rating Hg./72˚F Weight Permanent Fitting Series Natural Conductive inch mm inch mm psi bar inch mm inch lbs./ft. kg./mtr. 04-S40 04-S40B 3/16 5 .320 8 3,000 207 2 51 28 .08 .13 91N 05-S40 05-S40B 1/4 6 .375 10 3,000 207 3 76 28 .11 .16 91N 06-S40 06-S40B 5/16 8 .435 11 2,500 172 4 102 28 .12 .18 91N 08-S40 08-S40B 13/32 10 .565 14 2,000 138 5 127 28 .16 .23 91N 10-S40 10-S40B 1/2 13 .656 17 1,750 121 6-1/2 165 28 .17 .25 91N 12-S40 12-S40B 5/8 16 .780 20 1,500 103 7-1/2 191 12 .19 .28 91N 16-S40 16-S40B 7/8 22 1.05 27 1,000 69 9 229 14 .49 .73 91N lbs 39 Catalog 5162F All dimensions nominal – Working pressures and vacuum ratings may vary depending upon end connections and process and temperature parameters. Nominal Hose 944B – 4,000-4,500 psi W.P. High Temp Hose PTFE Hose, Double Stainless Steel Braid Features ƒƒ High temperature hydraulic hose ƒƒ Excellent chemical compatibility ƒƒ Resists moisture ƒƒ Low friction minimizes pressure drops and deposits ƒƒ General Hydraulics ƒƒ Chemical Transfer ƒƒ Compressed Air/Gases Applications/Markets Construction Tube: Black static-dissipative PTFE Reinforcement: 304 Stainless Steel braid Operating Parameters Temperature Range: -65°F to +400°F (-54°C to +204°C) Change in length at working pressure is +2% to -2% Min. Burst Pressure is 3x Max. Working Pressure at 72°F (23°C) All ratings based on 72°F (23°C) Fittings 94 Series – page 51 Notes Factory-made assemblies only Not suggested for steam-cold water cycling applications Reduce pressure to 3,000 psi (20.7MPa) for pressure impulse applications Part Number Nominal I.D. Maximum O.D. Maximum Working Pressure 72˚F/ 23˚C Minimum Bend Radius Vac. Rating Hg./72˚F Weight inch mm inch mm psi MPa inch mm inch lbs./ft. kg./mtr. 944B-4 15/64 6 .39 10 4,500 31.0 1.50 38 28 .11 .16 944B-6 5/16 8 .49 12 4,500 31.0 2.50 64 28 .17 .24 944B-8 7/16 11 .62 16 4,500 31.0 2.88 73 28 .25 .35 944B-10 1/2 13 .73 19 4,000 27.6 3.25 83 28 .31 .45 944B-12 5/8 16 .99 25 4,000 27.6 4.00 102 28 .74 1.05 944B-16 29/32 23 1.25 32 4,000 27.6 5.00 127 28 1.09 1.55 lbs 40 All dimensions nominal – Working pressures and vacuum ratings may vary depending upon end connections and process and temperature parameters. Specialty 955B – 5,500 psi W.P. High Temp Hose PTFE Hose, Multiple Stainless Steel Braids Features ƒƒ High temperature hydraulic hose ƒƒ Excellent chemical compatibility ƒƒ Resists moisture ƒƒ Low friction minimizes pressure drops and deposits Applications/Markets ƒƒ General Hydraulics ƒƒ Chemical Transfer ƒƒ Compressed Air/Gases ƒƒ Ground Support Construction Tube: Black static-dissipative PTFE Reinforcement: Multiple high density braids of 304 Stainless Steel Operating Parameters Temperature Range: -65°F to +400°F (-54°C to +204°C) Change in length at working pressure is +2% to –2% Min. Burst Pressure is 16,000 psi at 73°F (23°C) All ratings based on 72°F (23°C) Fittings 95 Series – page 51 Notes Factory-made assemblies only Not suggested for steam-cold water cycling applications Reduce operating pressure to 4000 psi (27.6 MPa) for impulse service applications Part Number Nominal I.D. Maximum O.D. Maximum Working Pressure 72˚F/ 23˚C Minimum Bend Radius Vac. Rating Hg./72˚F Weight inch mm inch mm psi MPa inch mm inch lbs./ft. kg./mtr. 955B-4 15/64 6 .50 13 5,500 37.9 3.00 76 28 .23 .34 955B-6 5/16 8 .62 16 5,500 37.9 5.00 127 28 .24 .35 955B-8 7/16 11 .75 19 5,500 37.9 5.75 146 28 .46 .68 955B-10 1/2 13 .91 23 5,500 37.9 6.50 165 28 .91 1.34 955B-12 5/8 16 1.08 27 5,500 37.9 7.75 197 28 .92 1.36 955B-16 29/32 23 1.36 34 5,500 37.9 9.63 245 28 1.20 1.77 lbs 41 Catalog 5162F All dimensions nominal – Working pressures and vacuum ratings may vary depending upon end connections and process and temperature parameters. Specialty Hose Fitting Insertion Values Hose Dash Size 91N 92 93N -2 -3 7/16 9/16 -4 1/2 -5 9/16 -6 5/8 7/16 -8 11/16 7/16 -10 11/16 3/4 -12 3/4 7/8 -16 15/16 15/16 -20 1 1 -24 1-1/8 -32 1-3/8 90, 91N/91, 94 & 95 Series Fitting Nomenclature Example: 10391N-8-6 This example describes a permanent crimp 1/2″ Male SAE JIC 37° with a 3/8″ I.D. hose size. This fitting is constructed of steel since the designated material is blank. 10391N-8-6 – Fitting Type (1 = Permanent/Crimp) 10391N-8-6 – End Configuration Code (Male SAE JIC 37) 10391N-8-6 – Fitting Series (Series 91N) 10391N-8-6 – End Size (1/2″) 10391N-8-6 – Hose I.D. (3/8″) Parker Fitting Material Selection – Blank = Steel (unless otherwise noted) – B = All Brass – C = Stainless Steel – S = All Carbon Steel – Used only with PTFE Fittings 90, 91N/91, 94 and 95 Series – Crimp and Field Attachable Fittings Industrial Fittings For S30, S40, 944B and 955B Hose Works on the following hose types: S30 & S40 uses 90 or 91N/91 Series 944B uses 94 & 955B uses 95 Series Where applicable, “B” indicates Brass and “C” indicates Carbon Steel and “S” indicates Stainless Steel. For detailed ordering information, contact Customer Service. Features ƒƒ Field attachable fittings allow users to work on-site ƒƒ Field attachable fittings required no expensive equipment Options ƒƒStainless or Carbon Steel 42 91N/91 Fittings 91N/91 Series Visual Index 91N/91 Series PERMANENT 101 Male Taper Pipe Rigid 103 Male JIC 37° 106 JIC 37° Female Swivel 106 RD JIC 37° Female Swivel w/o Nip. Hex 107 Female Pipe Swivel pg. 44 pg. 44 pg. 44 pg. 45 pg. 45 108 Female SAE 45° Swivel 128 Male Inverted Swivel Straight 134 Straight Tube 137 FemaleJIC 37° Swivel 45° Elbow 139 Female JIC 37° Swivel 90° Elbow pg. 45 pg. 45 pg. 46 pg. 46 pg. 46 141 Female JIC 37° Swivel 90° Elb Long 161 Compression Air Brake 167 SAE Male Inverted 45° Elbow 169 SAE Male Inverted 90° Elbow 177 SAE 45° Swivel 45° Elbow pg. 46 pg. 47 pg. 47 pg. 47 pg. 47 179 Female SAE 45° Swivel 90° Elbow 192 Female BSP Pipe Swivel STR (60° Cone) 1AL A-Lok® Compression 1B2 Female BSP Pipe Swl. 90° Elbow (60° Cone) 1FN Sanitary Flange pg. 48 pg. 50 pg. 48 pg. 50 pg. 48 1J1 Female Seal-Lok™ 90° Elbow Long 1J7 Female Seal-Lok™ 45° Elbow 1J9 Female Seal-Lok™ 90° Elbow 1JC Female Seal-Lok™ Swivel Straight Short 1P6 CPI® Compression w/nut and ferrule pg. 49 pg. 49 pg. 49 pg. 50 pg. 48 1Q1 Female Ultra Seal 1TU Universal Tube Stub End pg. 49 pg. 50 43 Catalog 5162F 91N/91 Fittings 91N/91 Series Permanent 10191N Male Taper Pipe Rigid Part Number Thread Size Hose Size A Cutoff Allow. B H Hex inch inch mm inch mm inch 10191N-2-4 1/8-27 -4 1.27 32 3/4 19 7/16 10191N-4-4 1/4-18 -4 1.50 38 15/16 24 9/16 10191N-4-5 1/4-18 -5 1.55 39 15/16 24 9/16 10191N-4-6 1/4-18 -6 1.60 41 15/16 24 9/16 10191N-6-6 3/8-18 -6 1.65 58 1 25 11/16 10191N-6-8 3/8-18 -8 1.71 43 1 25 11/16 10191N-8-8 1/2-14 -8 1.94 49 1-1/4 32 7/8 10191N-8-10 1/2-14 -10 1.96 50 1-1/4 32 7/8 10191N-8-12 1/2-14 -12 2.42 61 1-1/4 32 1 10191N-12-12 3/4-14 -12 2.19 56 1-3/8 35 1-1/8 10191N-16-16 1-11-1/2 -16 2.46 62 1-1/2 38 1-3/8 10191-20-20 1-1/4-11-1/2 -20 3.05 77 2-1/16 52 1-3/4 Construction: Brass nipple, steel shell. Add “B” for Brass nipple and shell. Add “C” for Stainless Steel. B A 10391N Male (JIC) 37° Part Number Thread Size Hose Size A Cutoff Allow. B H Hex inch inch mm inch mm inch 10391N-4-4 7/16-20 -4 1.37 35 13/16 21 1/2 10391N-5-5 1/2-20 -5 1.48 38 7/8 22 9/16 10391N-6-6 9/16-18 -6 1.64 42 1 25 11/16 10391N-8-8 3/4-16 -8 1.79 35 1-1/8 29 7/8 10391N-8-6 3/4-16 -6 1.73 44 1-1/16 27 7/8 10391N-10-10 7/8-14 -10 2.07 53 1-3/8 35 1 10391N-12-12 1-1/16-12 -12 2.10 53 1-5/16 33 1-1/8 10391N-16-16 1-5/16-12 -16 2.43 62 1-1/2 38 1-3/8 Construction: Brass nipple, steel shell. Add “B” for Brass nipple and shell. Add “C” for Stainless Steel. 10691N SAE (JIC) 37° Swivel Part Number Thread Size Hose Size A Cutoff Allow. B H Hex J Hex inch inch mm inch mm inch inch 10691N-4-4 7/16-20 -4 1.43 36 7/8 22 3/8 9/16 10691N-5-5 1/2-20 -5 1.56 40 15/16 24 7/16 5/8 10691N-6-6 9/16-18 -6 1.63 41 1 25 1/2 11/16 10691N-6-8 9/16-18 -8 1.69 43 1 25 9/16 11/16 10691N-8-8 3/4-16 -8 1.89 48 1-3/16 30 11/16 7/8 10691N-8-10 3/4-16 -10 1.86 58 1-1/8 29 3/4 7/8 10691N-10-10 7/8-14 -10 2.03 52 1-5/16 33 13/16 1 10691N-12-12 1-1/16-12 -12 2.12 54 1-5/16 33 1 1-1/4 10691N-16-16 1-5/16-12 -16 2.45 62 1-9/16 40 1-1/4 1-1/2 10691-20-20 1-5/8-12 -20 2.98 76 1-13/16 46 1-11/16 2 Construction: Brass nipple, steel nut and shell. Add “B” for Brass nipple, nut and shell. Add “S” for Steel nipple, nut and shell. Add “C” for Stainless Steel. NOTE: Sizes -4, -5,-8 and -10 incorporate a dual seat. 44 91N/91 Fittings 91N/91 Series Permanent 12891N Male Inverted Swivel–Straight Part Number Thread Size Hose Size A Cutoff Allow. B j Hex inch inch mm inch mm inch 12891N-4-4 7/16-24 -4 2.09 53 1-1/2 38 7/16 12891N-5-5 1/2-20 -5 2.15 55 1-9/16 40 1/2 12891N-5-6 1/2-20 -6 2.23 57 1-9/16 40 1/2 12891N-6-6 5/8-18 -6 2.23 57 1-9/16 40 5/8 12891N-8-8 3/4-18 -8 2.31 59 1-5/8 41 3/4 12891N-10-10 7/8-18 -10 2.43 58 1-3/4 44 7/8 12891N-12-12 1-1/16-16 -12 2.50 64 1-11/16 43 1-1/16 Construction: Steel nipple, tube, nut and shell. Add “C” for Stainless Steel. Part Number Thread Size Hose Size A Cutoff Allow. B H Hex inch inch mm inch mm inch 10691N-4-4-RD 7/16-20 -4 1.34 34 13/16 21 9/16 10691N-5-5-RD 1/2-20 -5 1.51 38 7/8 22 5/8 10691N-6-6-RD 9/16-18 -6 1.60 41 15/16 24 11/16 10691N-8-8-RD 3/4-16 -8 1.79 45 1-1/16 27 7/8 10691N-10-10-RD 7/8-14 -10 1.91 49 1-3/16 30 1 10691N-12-12-RD 1-1/16-12 -12 2.09 58 1-5/16 33 1-1/4 10691N-16-16-RD 1-5/16-12 -16 2.27 58 1-5/16 33 1-1/2 Construction: Brass nipple, steel nut and shell. Add “B” for Brass nipple, nut and shell. Add “C” for Stainless Steel. NOTE: Sizes -4, -5,-8 and -10 incorporate a dual seat. 37° 45° A B J 10691NRD SAE (JIC) 37° Swivel 10791N Female Pipe Swivel Part Number Thread Size Hose Size A Cutoff Allow. B H Hex J Hex inch inch mm inch mm inch inch 10791N-4-4 1/4-18 -4 1.50 38 15/16 24 9/16 11/16 10791N-6-6 3/8-18 -6 1.67 42 1 25 5/8 7/8 10791N-8-8 1/2-14 -8 1.83 46 1-1/8 29 3/4 1 10791N-10-10 3/4-14 -12 2.09 53 1-5/16 33 1 1-1/4 10791N-12-12 1-1/11-1/2 -12 2.26 57 1-5/16 33 1-3/16 1-3/8 Construction: Brass nipple, steel nut and shell. Add “B” for Brass nipple, nut and shell. Add “C” for Stainless Steel. 10891N SAE 45° Swivel Part Number Thread Size Hose Size A Cutoff Allow. B H Hex J Hex inch inch mm inch mm inch inch 10891N-6-6 5/8-18 -6 1.69 43 1-1/16 27 5/8 3/4 10891N-12-12 1-1/16-14 -12 2.12 54 1-5/16 33 1 1-1/4 Construction: Brass nipple, steel nut and shell. Add “S” for Steel nipple, nut and shell. Add “C” for Stainless Steel. 45 Catalog 5162F 91N/91 Fittings 91N/91 Series Permanent 13791N JIC 37° Swivel 45° Elbow Part Number Thread Size Hose Size A Cutoff Allow. B E J Hex inch inch mm inch mm inch mm inch 13791N-4-4 7/16-20 -4 1.74 44 1-3/16 30 0.33 8 9/16 13791N-5-5 1/2-20 -5 1.87 47 1-1/4 32 0.36 9 5/8 13791N-6-6 9/16-18 -6 1.94 49 1-5/16 33 0.43 11 11/16 13791N-8-8 3/4-16 -8 2.28 58 1-9/16 37 0.55 14 7/8 13791N-10-10 7/8-14 -10 2.42 61 1-11/16 43 0.64 43 1 13791N-12-12 1-1/16-12 -12 2.83 58 2-1/16 52 0.78 20 1-1/4 13791N-16-16 1-5/16-12 -16 3.18 81 2-1/4 57 0.89 23 1-1/2 13791-20-20 1-5/8-12 -20 3.67 93 2-9/16 65 1.10 28 2 Construction: Steel tube, nipple, nut and shell. Add “C” for Stainless Steel. R 13491N Straight Tube Part Number Hose Size Diameter R A Cutoff Allow. B inch inch mm inch mm 13491N-8-8 -8 1/2 2.80 71 2-1/8 54 13491N-8-10 -10 1/2 2.81 71 2-1/8 54 13491N-10-10 -10 5/8 2.96 75 2-1/4 58 13491N-12-12 -12 3/4 3.37 86 2-9/16 65 Construction: Brass nipple, steel shell. Add “B” for Brass nipple and shell. Add “C” for Stainless Steel. NOTE: The 16T91N fitting includes 13491N with the 60HAB sleeve and 61HAB. 13991N JIC 37° Swivel 90° Elbow Part Number Thread Size Hose Size A Cutoff Allow. B E J Hex inch inch mm inch mm inch mm inch 13991N-4-4 7/16-20 -4 1.62 41 1-1/16 37 0.68 17 9/16 13991N-5-5 1/2-20 -5 1.71 43 1-1/8 29 0.77 20 5/8 13991N-6-6 9/16-18 -6 1.91 49 1-1/4 32 0.91 23 11/16 13991N-8-8 3/4-16 -8 2.03 52 1-5/16 33 1.09 28 7/8 13991N-10-10 7/8-14 -10 2.27 58 1-9/16 37 1.23 43 1 13991N-12-12 1-1/16-12 -12 2.75 58 1-15/16 49 1.82 46 1-1/2 13991N-16-16 1-5/16-12 -16 3.15 80 2-3/16 56 2.14 52 1-1/2 13991-20-20 1-5/8-12 -20 3.53 90 2-7/16 62 1.18 30 2 Construction: Steel tube, nipple, nut and shell. Add “C” for Stainless Steel. 14191N JIC 37° Swivel 90° Elbow Long Drop Part Number Thread Size Hose Size A Cutoff Allow. B E J Hex inch inch mm inch mm inch mm inch 14191N-4-4 7/16-20 -4 1.66 42 1-1/8 29 1.80 46 9/16 14191N-5-5 1/2-20 -5 1.72 44 1-1/8 29 1.77 45 5/8 14191N-6-6 9/16-18 -6 1.93 49 1-5/16 33 2.13 54 11/16 14191N-8-8 3/4-16 -8 2.11 54 1-3/8 35 2.43 62 7/8 14191N-10-10 7/8-14 -10 2.34 59 1-5/8 41 2.57 65 1 14191N-12-12 1-1/16-12 -12 2.63 67 1-7/8 48 3.73 95 1-1/4 14191N-16-16 1-5/16-12 -16 3.15 80 2-3/16 56 4.33 110 1-1/2 14191-20-20 1-5/8-12 -20 4.00 102 2-15/16 75 5.28 134 2 Construction: Steel tube, nipple, nut and shell. Add “C” for Stainless Steel. A B E 46 91N/91 Fittings 91N/91 Series Permanent 16191N Compression Air Brake Part Number Thread Size Hose Size A Cutoff Allow. B H Hex inch inch mm inch mm inch 16191N-8-8 11/16-20 -8 1.61 41 15/16 24 3/4 16191N-8-10 11/16-20 -10 1.61 41 15/16 24 7/8 16191N-10-10 13/16-18 -10 1.82 46 1-1/8 29 15/16 16191N-12-12 1-18 -12 1.93 49 1-1/8 29 1-1/4 Construction: Brass nipple, steel shell. Add “B” for Brass nipple and shell. Add “C” for Stainless Steel. 16791N Male Inverted Swivel 45° Elbow Part Number Thread Size Hose Size A Cutoff Allow. B E J Hex inch inch mm inch mm inch mm inch 16791N-4-4 7/16-24 -4 2.05 52 1-1/2 38 0.63 16 7/16 16791N-5-5 1/2-20 -5 2.48 63 1-7/8 48 0.71 18 1/2 16791N-6-6 5/8-18 -6 2.60 66 1-15/16 49 0.96 24 5/8 16791N-8-8 3/4-18 -8 2.85 72 2-1/8 54 0.90 23 3/4 16791N-10-10 7/8-18 -10 3.30 84 2-5/8 67 1.02 43 7/8 16791N-12-12 1-1/16-16 -12 3.64 58 2-13/16 71 1.15 29 1-1/16 Construction: Steel tube, nipple, nut and shell. Add “C” for Stainless Steel. 16991N Male Inverted Swivel 90° Elbow Part Number Thread Size Hose Size A Cutoff Allow. B E J Hex inch inch mm inch mm inch mm inch 16991N-4-4 7/16-24 -4 1.72 44 1-3/16 30 1.19 30 7/16 16991N-5-5 1/2-20 -5 1.98 50 1-3/8 35 1.65 42 1/2 16991N-5-6 1/2-20 -6 2.03 52 1-7/16 37 1.65 42 1/2 16991N-6-6 5/8-18 -6 2.08 53 1-7/16 37 1.70 43 5/8 16991N-8-8 3/4-18 -8 2.18 55 1-1/2 38 1.87 43 3/4 16991N-10-10 7/8-18 -10 3.02 58 2-5/16 59 2.18 55 7/8 16991N-12-12 1-1/16-16 -12 3.36 85 2-9/16 64 2.51 64 1-1/16 Construction: Steel tube, nipple, nut and shell. Add “C” for Stainless Steel. A E J B 17791N SAE 45° Swivel 45° Elbow Part Number Thread Size Hose i.d. A Cutoff Allow. B E J Hex inch mm inch mm inch mm inch mm inch 17791N-6-6 5/8-18 3/8 10 2.06 52 1-5/16 33 0.39 10 3/4 17791N-12-12 1-1/16-14 3/4 19 3.07 78 2-7/16 62 0.78 20 1-1/4 Construction: Steel tube, nipple, nut and shell. Add “C” for Stainless Steel. 47 Catalog 5162F 91N/91 Fittings 91N/91 Series Permanent 1AL91N A-LOK® Compression Part Number Part Number Hose Size A Cutoff Allow. B H Hex J Hex w/nut & ferrule w/o nut & ferrules inch mm inch mm inch inch 1AL91N-4-4C 1AL91N-4-4NC -4 1.30 33 7/16 11 1/2 9/16 1AL91N-4-5C 1AL91N-4-5NC -5 1.35 34 7/16 11 1/2 9/16 1AL91N-6-6C 1AL91N-6-6NC -6 1.53 39 1/2 13 5/8 11/16 1AL91N-8-8C 1AL91N-8-8NC -8 1.61 41 7/16 11 13/16 7/8 1AL91N-12-12C 1AL91N-12-12NC -12 1.86 47 1/2 13 1-1/8 1-1/8 1AL91N-16-16C 1AL91N-16-16NC -16 2.11 58 7/16 11 1-3/8 1-1/2 Construction: Stainless steel nipple, nut, ferrules and shell. Note: Nut part No. is XNUX-316; Front ferrule part No. is XFFX-316; Back ferrule part No. is XBFX-316. X denotes dash size. Nuts and Ferrules are Manufactured by the Instrumentation Products Division. Refer to Catalog 4230/4233 for Installation Instructions and Replacement Components. 1P691N CPI® Compression (With Nut and Ferrule) Part Number Hose Size A Cutoff Allow. B H Hex J Hex w/nut & ferrules inch mm inch mm inch inch 1P691N-4-4C -4 1.30 33 7/16 11 1/2 9/16 1P691N-6-6C -6 1.53 39 1/2 13 5/8 11/16 1P691N-8-8C -8 1.61 41 7/16 11 13/16 7/8 Construction: Stainless steel nipple and shell. Note: Nut part No. is XBZ-SS; Ferrule part No. is XTZ-SS; X denotes dash size. Nuts and Ferrules are Manufactured by the Instrumentation Products Division. Refer to Catalog 4230/4233 for Installation Instructions and Replacement Components. 1FN91N Sanitary Flange Part Number Hose Size A Cutoff Allow. B C Flange Size D inch mm inch mm inch mm inch mm 1FN91N-16-16C -16 1.96 50 1-1/16 27 0.87 22 1.98 50 Construction: Stainless steel nipple and shell. 17991N SAE 45° Swivel 90° Elbow Part Number Thread Size Hose I.D. A Cutoff Allow. B E J Hex inch mm inch mm inch mm inch mm inch 17991N-6-6 5/8-18 3/8 10 2.06 52 1-5/16 49 1.19 30 3/4 17991N-12-12 1-1/16-14 3/4 19 2.92 74 2-1/8 54 1.82 46 1-1/4 Construction: Steel tube, nipple, nut and shell. Add “C” for Stainless Steel. 48 91N/91 Fittings 91N/91 Series Permanent 1J191N Female Seal-Lok™ Swivel 90° Elbow Long Drop Part Number Thread Size Hose Size A Cutoff Allow. B E J Hex inch mm inch mm inch mm inch 1J191N-4-4 9/16-18 -4 1.66 42 1-1/16 27 1.80 46 11/16 1J191N-4-5 9/16-18 -5 1.78 45 1-1/16 27 1.80 46 11/16 1J191N-6-5 11/16-16 -5 1.92 49 1-3/16 30 2.13 54 13/16 1J191N-6-6 11/16-16 -6 1.92 49 1-3/16 30 2.13 54 13/16 1J191N-8-6 13/16-16 -6 2.00 51 1-9/16 40 2.51 43 15/16 1J191N-8-8 13/16-16 -8 2.15 58 1-7/16 37 2.51 64 15/16 1J191N-10-10 1-14 -10 1.25 32 1-9/16 40 2.76 70 1-1/8 1J191N-12-12 1-3/16-12 -12 2.65 67 1-13/16 46 3.78 96 1-3/8 1J191N-16-16 1-7/16-12 -16 3.15 80 2-1/4 57 4.50 114 1-1/2 Construction: Steel tube, nipple, nut and shell. Add “C” for Stainless Steel. 1J791N Female Seal-Lok™ Swivel 45° Elbow Part Number Thread Size Hose Size A Cutoff Allow. B E J Hex inch mm inch mm inch mm inch 1J791N-4-4 9/16-18 -4 1.73 44 1-1/4 32 0.41 10 11/16 1J791N-4-6 9/16-18 -6 1.91 49 1-5/16 33 0.41 10 11/16 1J791N-6-6 11/16-16 -6 2.02 51 1-3/8 35 0.43 11 13/16 1J791N-8-8 13/16-16 -8 2.18 55 1-1/2 38 0.59 15 15/16 1J791N-8-10 13/16-16 -8 2.39 61 1-11/16 43 0.59 15 15/16 1J791N-10-10 1-14 -10 2.47 63 1-3/4 44 0.59 43 1-1/8 1J791N-12-12 1-3/16-12 -12 2.74 58 1-15/16 49 0.81 21 1-3/8 1J791N-16-16 1-7/16-12 -16 3.50 89 2-1/2 64 0.94 24 1-5/8 Construction: Steel tube, nipple, nut and shell. Add “C” for Stainless Steel. 1J991N Female Seal-Lok™ Swivel 90° Elbow Short Drop Part Number Thread Size Hose Size A Cutoff Allow. B E J Hex inch mm inch mm inch mm inch 1J991N-4-4 9/16-18 -4 1.73 44 1-1/4 32 0.82 21 11/16 1J991N-6-6 11/16-16 -6 1.91 49 1-5/16 33 0.91 23 13/16 1J991N-8-8 13/16-16 -6 2.02 51 1-3/8 35 1.15 29 15/16 1J991N-10-10 1-14 -8 2.18 55 1-1/2 38 1.27 32 1-1/8 1J991N-12-12 1-3/16-12 -8 2.39 61 1-11/16 43 1.85 43 1-3/8 1J991N-16-16 1-7/16-12 -10 2.47 63 1-3/4 44 2.21 56 1-5/8 Construction: Steel tube, nipple, nut and shell. Add “C” for Stainless Steel. 1Q191N Ultra Seal Part Number Thread Size Hose Size A Cutoff Allow. B J Hex inch mm inch mm inch 1Q191N-8-8C 7/8-20 -8 1.62 41 15/16 24 1 Construction: Stainless Steel. 49 Catalog 5162F 91N/91 Fittings 91N/91 Series Permanent Part Number Thread Size Hose Size A Cutoff Allow. B C H Hex J Hex inch mm inch mm inch mm inch inch 1JC91N-4-4 9/16-18 -4 1.46 37 5/8 16 .32 8 9/16 11/16 1JC91N-6-6 11/16-16 -6 1.62 41 11/16 17 .32 8 5/8 13/16 1JC91N-8-8 13/16-16 -8 1.93 49 13/16 21 .43 11 3/4 15/16 1JC91N-10-10 1-14 -10 2.05 52 7/8 22 .53 13 15/16 1-1/8 1JC91N-12-10 1-3/16-12 -10 2.05 52 1-1/4 32 .57 14 15/16 1-3/8 1JC91N-12-12 1-3/16-12 -12 2.05 58 1-1/4 32 .57 14 15/16 1-3/8 1JC91N-16-16 1-7/16-12 -16 2.56 65 1-1/16 27 .58 15 1-3/8 1-5/8 1JC91N-20-16 1-11/16-12 -16 2.30 58 1-3/8 35 .59 15 1-5/8 1-7/8 1JC91-20-20 1-11/16-12 -20 2.68 68 1-11/16 43 .59 15 1-11/16 1-7/8 Construction: Steel nipple, nut and shell. Add “B” for Brass nipple, nut and shell. Add “C” for Stainless Steel. 1JC91N Female Seal-Lok™ Swivel Straight C Part Number Thread Size Hose Size A Cutoff Allow. B E J Hex inch mm inch mm inch mm inch 1B291N-8-8 PF-1/2-14 -8 2.04 52 1-3/8 35 1.57 40 27 1B291N-12-12 PF-3/4-14 -12 2.93 74 2-1/8 54 2.54 65 36 Construction: Steel nipple, nut and shell. Add “C” for Stainless Steel. 1B291N Female Parallel Pipe Swivel – 90° Elbow (60° Cone) 1TU91N Universal Tube Stub Part Number Hose Size Diameter R A Cutoff Allow. B inch inch mm inch mm 1TU91-2-3C -3 1/8 1.33 34 7/8 22 1TU91-3-3C -3 3/16 1.33 34 7/8 22 1TU91N-4-4C -4 1/4 1.63 41 1-1/16 27 1TU91N-4-5C -5 1/4 1.70 43 1-1/16 27 1TU91N-6-6C -6 3/8 1.81 46 1-3/16 30 1TU91N-8-8C -8 1/2 2.72 58 1-7/16 37 1TU91N-8-10C -10 1/2 2.14 54 1-7/16 37 1TU91N-10-10C -10 5/8 2.14 54 1-7/16 37 1TU91N-12-12C -12 3/4 2.24 57 1-7/16 37 1TU91N-16-16C -16 1 2.73 69 1-3/4 44 Construction: Stainless Steel. NOTE: Use with A-Lok & CPI nuts, sleeves and adapters. These components are manufactured by Parker’s Instrumentation Connectors Division. Refer to catalogs 4230 & 4233 for additional information. R Part Number Thread Size Hose Size A Cutoff Allow. B C H Hex J Hex inch mm inch mm inch mm inch inch 19291N-8-8 PF-1/2-14 -8 1.99 51 1-5/16 33 27 27 9/16 11/16 19291N-12-12 PF-3/4-14 -12 2.35 60 1-9/16 40 36 36 5/8 13/16 Construction: Steel nipple, nut and shell. Add “B” for Brass nipple, nut and shell. Add “C” for Stainless Steel. 19291N Female BSP Parallel Pipe Swive Straight (60° Cone) 50 91N/91 Fittings 91N/91 Series Permanent 94/95 Series Visual Index 10694 SAE (JIC) 37° Female Swivel Part Number Thread Size Hose Size A Cutoff Allow. B J Hex inch mm inch mm inch 10694-6-6 9/16-18 -6 1.76 45 15/16 24 11/16 10694-8-8 3/4-16 -8 2.09 53 1-3/16 30 7/8 10694-10-10 7/8-14 -10 2.30 58 1-5/16 33 1 10694-12-12 1-1/16-12 -12 2.45 62 1-5/16 33 1-1/4 10694-16-16 1-5/16-12 -16 2.72 69 1-7/16 37 1-1/2 Construction: Steel nipple, nut and shell. Add “C” for Stainless Steel. 10695 SAE (JIC) 37° Female Swivel Part Number Thread Size Hose Size A Cutoff Allow. B J Hex inch mm inch mm inch 10695-4-4 7/16-20 -4 1.76 45 15/16 24 11/16 10695-6-6 9/16-18 -6 2.09 53 1-3/16 30 7/8 10695-8-8 3/4-16 -8 2.30 58 1-5/16 33 1 10695-12-12 1-1/16-12 -12 2.45 62 1-5/16 33 1-1/4 10695-16-16 1-5/16-12 -16 2.72 69 1-7/16 37 1-1/2 Construction: Steel nipple, nut and shell. Add “C” for Stainless Steel. 94 Series PERMANENT 106 SAE (JIC) 37° Female Swivel pg. 51 95 Series PERMANENT 106 SAE (JIC) 37° Female Swivel pg. 51 51 Catalog 5162F 94/95 Fittings 94/95 Series Permanent 90 Series Visual Index A 20190 Male Taper Pipe Rigid Part Number Thread Size Hose Size A Cutoff Allow. B H Hex inch mm inch mm inch 20190-2-4 1/8-27 -4 1.33 34 7/8 22 9/16 20190-4-4 1/4-18 -4 1.58 40 1-1/16 27 9/16 20190-4-5 1/4-18 -5 1.66 42 1-1/8 29 5/8 20190-4-6 1/4-18 -6 1.66 42 1-1/8 29 11/16 20190-6-6 3/8-18 -6 1.66 42 1-1/8 29 11/16 20190-6-8 3/8-18 -8 1.77 45 1-3/16 30 7/8 20190-8-8 1/2-14 -8 1.97 50 1-7/16 37 7/8 20190-8-10 1/2-14 -10 2.13 54 1-7/16 37 1 20190-12-12 3/4-14 -12 2.26 57 1-9/16 40 1-1/8 20190-12-16 3/4-14 -16 2.29 58 1-5/8 41 1-3/8 20190-16-16 1-11-1/2 -16 2.46 62 1-7/8 48 1-3/8 20190-20-20 1-1/4-11-1/2 -20 2.69 68 2-1/16 52 2 Construction: Brass nipple and ferrule, steel socket. Add “C” for Stainless Steel. 90 Series FIELD ATTACHABLE 201 Male Taper Pipe Rigid 206 SAE (JIC) 37° Swivel 208 SAE 45° Swivel 228 SAE Male Inverted Swivel Straight 234 Straight Tube pg. 52 pg. 53 pg. 53 pg. 53 pg. 53 237 JIC 37° Swivel 45° Elbow 239 JIC 37° Swivel 90° Elbow 253 SAE Compression Air Brake 267 SAE Male Inverted Swivel 45° Elbow 269 SAE Male Inverted Swivel 90° Elbow pg. 54 pg. 54 pg. 54 pg. 54 pg. 55 277 SAE 45° Swivel 45° Elbow 279 SAE 45° Swivel 90° Elbow pg. 55 pg. 55 52 200 Replacement Socket 090 Replacement Ferrule 60HAB Compression Airbrake Sleeve 61HAB Compression Airbrake Nut pg. 56 pg. 56 pg. 57 pg. 57 90 Series REPLACEMENT COMPONENTS 90 Series Fittings 90 Series Field Attachable 20690 SAE (JIC) 37° Swivel Part Number Thread Size Hose Size A Cutoff Allow. B H Hex J Hex inch mm inch mm inch inch 20690-4-4 7/16-20 -4 1.58 40 1-1/8 29 9/16 9/16 20690-5-5 1/2-20 -5 1.66 42 1-1/8 29 5/8 5/8 20690-6-6 9/16-18 -6 1.74 44 1-3/16 35 11/16 11/16 20690-8-6 3/4-16 -6 1.85 47 1-5/16 33 7/8 7/8 20690-8-8 3/4-16 -8 1.98 50 1-3/8 35 7/8 7/8 20690-8-10 3/4-16 -10 2.07 53 1-7/16 37 1 7/8 20690-10-10 7/8-14 -10 2.22 56 1-1/2 38 1 1 20690-12-12 1-1/16-12 -12 2.33 59 1-5/8 41 1-1/4 1-1/4 20690-16-16 1-5/16-12 -16 2.52 64 1-15/16 49 1-3/8 1-1/2 20690-20-20 1-5/8-12 -20 2.99 76 2-5/16 59 2 2 Construction: Brass nipple and ferrule, steel nut and socket. Add “C” for Stainless Steel. NOTE: Sizes -4, -5,-8 and -10 incorporate a dual seat. A 45° 37° J H B 20890 SAE 45° Swivel Part Number Thread Size Hose Size A Cutoff Allow. B H Hex J Hex inch mm inch mm inch inch 20890-6-6 5/8-18 -6 1.77 45 1-1/4 32 11/16 3/4 20890-12-12 1-1/16-14 -12 2.34 59 1-11/16 43 1-1/8 1-1/4 Construction: Brass nipple and ferrule, steel nut and socket. Add “C” for Stainless Steel. A J H B 45° 22890 SAE Male Inverted Swivel-Straight Part Number Thread Size Hose Size A Cutoff Allow. B H Hex J Hex inch mm inch mm inch inch 22890-4-4 7/16-24 -4 2.15 55 1-11/16 43 9/16 7/16 22890-5-5 1/2-20 -5 2.21 56 1-11/16 43 5/8 1/2 22890-5-6 1/2-20 -6 2.20 56 1-11/16 43 11/16 1/2 22890-6-6 5/8-18 -6 2.22 56 1-11/16 43 11/16 5/8 22890-8-8 3/4-18 -8 2.34 59 1-13/16 46 13/16 3/4 22890-10-10 7/8-18 -10 2.53 64 1-7/8 48 15/16 7/8 22890-12-12 1-1/16-16 -12 3.01 76 2-3/8 60 1-1/8 1-1/16 Construction: Brass ferrule, steel tube, nut and socket. Add “C” for Stainless Steel. H B A 23490 Straight Tube Part Number Hose Size Tube Size A Cutoff Allow. B H Hex inch mm inch mm inch mm inch 23490-8-8 -8 1/2 6 3.06 78 2-1/2 64 13/16 23490-8-10 -10 1/2 8 3.15 80 2-1/2 64 1 23490-10-8 -8 5/8 8 3.26 83 2-5/8 67 13/16 23490-10-10 -10 5/8 10 3.28 83 2-5/8 67 1 23490-12-12 -12 3/4 13 3.28 83 2-11/16 68 1-1/8 Construction: Brass nipple and ferrule, steel socket. Add “C” for Stainless Steel. NOTE: 26T90 fitting includes 23490 with the 60HAB sleeve and 61HAB nut. 53 Catalog 5162F 90 Series Fittings 90 Series Field Attachable 23790 JIC 37° Swivel 45° Elbow Part Number Thread Size Hose Size A Cutoff Allow. B E H Hex J Hex inch mm inch mm inch mm inch inch 23790-4-4 7/16-20 -4 1.79 45 1-3/8 35 0.33 8 9/16 9/16 23790-5-5 1/2-20 -5 1.86 47 1-3/8 35 0.36 9 5/8 5/8 23790-6-6 9/16-18 -6 1.96 50 1-7/16 37 0.39 10 11/16 11/16 23790-8-6 3/4-16 -6 2.11 54 1-11/16 43 0.55 14 11/16 7/8 23790-8-8 3/4-16 -8 2.40 61 1-3/4 44 0.55 14 13/16 7/8 23790-10-10 7/8-14 -10 2.45 62 1-7/8 48 0.63 16 15/16 1 23790-12-12 1-1/16-12 -12 3.04 77 2-7/16 62 0.78 20 1-1/8 1-1/4 23790-16-16 1-5/16-12 -16 3.28 83 2-11/16 68 0.90 23 1-3/8 1-1/2 23790-20-20 1-5/8-12 -20 3.70 94 3-1/16 78 1.18 30 1-3/4 2 Construction: Brass ferrule, steel tube, nut and socket. Add “C” for Stainless Steel. 23990 JIC 37° Swivel 90° Elbow Short Drop Part Number Thread Size Hose Size A Cutoff Allow. B E H Hex J Hex inch mm inch mm inch mm inch inch 23990-4-4 7/16-20 -4 1.67 41 1-1/4 32 0.83 21 9/16 9/16 23990-5-5 1/2-20 -5 1.75 44 1-1/4 32 0.83 21 5/8 5/8 23990-6-6 9/16-18 -6 1.84 47 1-5/16 33 0.91 23 11/16 11/16 23990-8-6 3/4-16 -6 1.94 49 1-7/16 37 1.14 29 11/16 7/8 23990-8-8 3/4-16 -8 2.14 54 1-9/16 40 1.14 29 13/16 7/8 23990-10-10 7/8-14 -10 2.38 60 1-3/4 44 1.23 31 15/16 1 23990-12-12 1-1/16-12 -12 2.95 75 2-5/16 59 1.82 46 1-1/8 1-1/4 23990-16-16 1-5/16-12 -16 3.13 80 2-1/2 64 2.14 54 1-3/8 1-1/2 23990-20-20 1-5/8-12 -20 3.54 90 2-7/8 73 2.57 65 1-3/4 2 Construction: Brass ferrule, steel tube, nut and socket. Add “C” for Stainless Steel. 26190 SAE Compression Air Brake Part Number Thread Size Hose Size A Cutoff Allow. B H Hex inch mm inch mm inch 26190-8-8 11/16-20 -8 1.69 43 1-1/16 27 13/16 26190-8-10 11/16-20 -10 1.86 47 1-3/16 30 1 26190-10-10 13/16-18 -10 1.92 49 1-1/4 32 1 26190-12-10 1-18 -10 2.09 53 1-7/16 37 1 26190-12-12 1-18 -12 2.09 53 1-7/16 37 1-1/8 Construction: Brass nipple and ferrule, steel socket. Add “B” for Brass nipple and socket. Add “C” for Stainless Steel. 20° 26790 SAE Male Inverted Swivel 45° Elbow Part Number Thread Size Hose Size A Cutoff Allow. B E H Hex J Hex inch mm inch mm inch mm inch inch 26790-4-4 7/16-24 -4 2.11 54 1-11/16 43 0.63 16 9/16 7/16 26790-5-5 1/2-20 -5 2.51 64 2 51 0.94 24 5/8 1/2 26790-5-6 1/2-20 -6 2.55 65 2-1/16 52 0.94 24 11/16 1/2 26790-6-6 5/8-18 -6 2.61 66 2-1/8 54 0.94 24 11/16 5/8 26790-8-8 3/4-18 -8 2.97 75 2-3/8 60 0.94 24 13/16 3/4 26790-8-10 3/4-18 -10 3.05 77 2-7/16 62 0.94 24 15/16 3/4 26790-10-10 7/8-18 -10 3.43 87 2-11/16 68 1.02 26 15/16 7/8 26790-12-12 1-1/16-16 -12 3.83 97 3-3/16 81 1.15 29 1-1/8 1-1/16 Construction: Brass ferrule, steel tube, nut and socket. Add “C” for Stainless Steel. 54 90 Series Fittings 90 Series Field Attachable 55 Catalog 5162F 26990 SAE Male Inverted Swivel 90° Elbow Part Number Thread Size Hose Size A Cutoff Allow. B E H Hex J Hex inch mm inch mm inch mm inch inch 26990-4-4 7/16-24 -4 1.79 45 1-5/16 33 1.19 30 9/16 7/16 26990-5-5 1/2-20 -5 2.01 51 1-1/2 38 1.65 42 5/8 1/2 26990-5-6 1/2-20 -6 2.05 52 1-9/16 40 1.65 42 11/16 1/2 26990-6-6 5/8-18 -6 2.03 52 1-1/2 38 1.70 43 11/16 5/8 26990-8-8 3/4-18 -8 2.30 58 1-11/16 43 1.78 45 13/16 3/4 26990-8-10 3/4-18 -10 2.39 61 1-3/4 44 1.78 45 15/16 3/4 26990-10-10 7/8-18 -10 3.16 80 2-1/2 64 2.18 55 15/16 7/8 26990-12-12 1-1/16-16 -12 3.56 90 2-15/16 75 2.51 64 1-1/8 1-1/16 Construction: Brass ferrule, steel tube, nut and socket. Add “C” for Stainless Steel. 27790 SAE 45° Swivel 45° Elbow Part Number Thread Size Hose Size A Cutoff Allow. B E H Hex J Hex inch mm inch mm inch mm inch inch 27790-6-6 5/8-18 -6 1.72 44 1-3/16 30 0.39 10 11/16 3/4 27790-12-12 1-1/16-14 -12 3.03 77 2-3/8 60 0.78 20 1-1/8 1-1/4 Construction: Brass ferrule, steel tube, nut and socket. Add “C” for Stainless Steel. 27990 SAE 45° Swivel 90° Elbow Part Number Thread Size Hose Size A Cutoff Allow. B E H Hex J Hex inch mm inch mm inch mm inch inch 27990-4-4 7/16-20 -4 1.67 42 1-1/4 32 .68 17 9/16 9/16 27990-5-5 1/2-20 -5 1.75 44 1-1/4 32 .77 20 5/8 5/8 27990-6-6 5/8-18 -6 1.86 47 1-3/8 35 .85 22 11/16 3/4 27990-8-8 3/4-16 -8 2.09 53 1-1/2 38 1.09 28 13/16 7/8 27990-12-12 1-1/16-14 -12 2.95 75 2-5/16 39 1.82 46 1-1/8 1-1/4 Construction: Brass ferrule, steel tube, nut and socket. Add “C” for Stainless Steel. 90 Series Fittings 90 Series Field Attachable 60 HAB SAE Compression Airbrake Sleeve Part Number Tube Size L inch mm inch 60HAB-4 1/4 6 .250 60HAB-6 3/8 10 .313 60HAB-8 1/2 13 .375 60HAB-10 5/8 16 .438 60HAB-12 3/4 19 .500 Construction: Brass. NOTE: To be used with 13491N & 23490. 20090 Replacement Socket for Field Attachable Fittings Part Number H Hex inch 20090-4 9/16 20090-5 5/8 20090-6 11/16 20090- 8 7/8 20090-10 1 20090-12 1-1/8 20090-16 1-3/8 20090-20 1-3/4 Construction: Steel or Stainless Steel. Add “C” for Stainless Steel. H 56 90 Series Fittings 90 Series Field Attachable 090 Replacement Ferrule for 90 Series Field Attachable Fittings Part Number Hose Size 090-4B -4 090-5B -5 090-6B -6 090- 8B -8 090-10B -10 090-12B -12 090-16B -16 090-20B -20 Construction: Brass. Replace “B” with “C” for Stainless Steel. 57 Catalog 5162F 61 HAB SAE Compression Airbrake Nut Part Number Thread Size Tube Size L W Hex inch mm inch mm inch 61HAB-4 7/16-24 1/4 6 0.75 19 9/16 61HAB-6 7/32-24 3/8 10 1.13 29 5/8 61HAB- 8 11/16-20 1/2 13 1.25 32 13/16 61HAB-10 13/16-18 5/8 16 1.38 35 15/16 61HAB-12 1-18 3/4 19 1.56 40 1-1/8 Construction: Brass. NOTE: To be used with 13491N & 23490 Fittings. 90 Series Fittings 90 Series Field Attachable SFS Series Silicone Fire Sleeve Hose Number Fire Sleeve Number -03 SFS-08 -04 SFS-08 -05 SFS-08 -06 SFS-12 -08 SFS-12 -10 SFS-12 -12 SFS-16 -16 SFS-20 -16Z SFS-20 -20Z SFS-24 OPERATING TEMPERATURES: Continuous: -65˚F to +500°F (-18˚C to +260˚C) Intermittent: -65˚F to +2000°F (-18˚C to +1093˚C) TESTED in accordance with: UL-73, NFPA-250, ASTM-E84 Accessories For Fluoropolymer Hoses Harsh environments sometimes require assemblies with silicone fire sleeves, fluoropolymer heat shrink, polyolefin shrinkable chafe guard, spring guards or interlocked casings to prolong the life of the hose. PARKER PAGE manufactures every hose style with these options available. Maximizing hose performance by adding cost reducing accessories such as Armor Guard, to increase the abrasion resistance of the hose, or a Fire Sleeve, to maintain an outer hose temperature for operator handling, can add weeks, months, and in some cases, even years to hose life. Cost for hose enhancing accessories is minimal compared to the savings you gain by keeping the hose operating longer in the field. Most of these product enhancements are available for hoses sized from ¼” up to 4” and can be provided on almost any hose. In addition, several of the value added accessories may be purchased separately, allowing customers to value-up their existing hoses. Features ƒƒ Extends hose life ƒƒ Maximizes performance ƒƒ Increased abrasion resistance ƒƒ Reduces downtime ƒƒ Cover promotes safe operator handling PARKER PAGE Fire Sleeve has a coating of specially compounded silicone rubber bonded to a low density high bulk fiberglass sleeve. This unique combination offers a temporary barrier to flame penetration and provides long term mechanical and environmental protection. Applications include steel manufacturing plants, foundries, glass factories and welding/cutting shops. 58 Accessories COLORS AVAILABLE RED= Red BLK= Black WHI=White BLU=Blue YEL=Yellow GRY=Gray B2 Polyolefin Heat Shrink Hose Number Polyolefin HS -03 B2-08-XXX -04 B2-08-XXX -05 B2-08-XXX -06 B2-12-XXX -08 B2-12-XXX -10 B2-12-XXX -12 B2-16-XXX -16 B2-24-XXX -16Z B2-24-XXX -20Z B2-24-XXX SG Series Spring Guard Dash Number Part Number Hose Number Spring Guard Number -04 SG-04 -12 SG-12 -05 SG-05 -16 SG-16 -06 SG-06 -16Z SG-16Z -08 SG-08 -20Z SG-20Z -10 SG-10 – – PARKER PAGE Spring Guard is available in hot dipped galvanized carbon steel. This method of protection is well suited for applications where hose assemblies are subjected to rough handling, abrasion and severe flexing. A stainless steel internal support spring is also available for vacuum applications. Note: Replace XXX with 3 letter indicator for color. See color chart. lE: B2-08-BLU = 1/2” Blue Custom Printing Available Fluoropolymer Heat Shrink Available OPERATING TEMPERATURES: Continuous: -65°F to +275°F (-18°C to +135°C) PARKER PAGE offers a very flexible, flame retarded, radiation crosslinked Polyolefin heat shrink to aid in the identification of hoses through color coding and also, protect surfaces from dirt and grim. Meets functional requirements of AMS-DTL-23053/5, Class 1E2. 59 Catalog 5162F SAG Armor Guard Non Standard Product Please contact Customer Service for sizing, delivery and pricing. 817.624.1329 • 800.847.7280 • email: pagequote@parker.com Accessories Catalog 5162F BRAID TYPE CHARACTERISTICS POOR FAIR GOOD EXCELLENT STAINLESS STEEL Temperature Rating on Hose -100°F to +500°F (-73°C to +260°C) Tensile Strength l Abrasion Resistance l Chemical Resistance l Corrosion Resistance l High Temperature Capabilities l Durability l Personal Handling Safety l POLYPROPYLENE Temperature Rating on Hose 0°F to +212°F (-18°C to +100°C) Tensile Strength l Abrasion Resistance l Chemical Resistance l Corrosion Resistance l High Temperature Capabilities l Durability l Personal Handling Safety l Kynar® (PVDF) Temperature Rating on Hose -40°F to +280°F (-40°C to +138°C) Tensile Strength l Abrasion Resistance l Chemical Resistance l Corrosion Resistance l High Temperature Capabilities l Durability l Personal Handling Safety l KEVLAR® Temperature Rating on Hose -100°F to +350°F (-73°C to +177°C) Tensile Strength l Abrasion Resistance l Chemical Resistance l Corrosion Resistance l High Temperature Capabilities l Durability l Personal Handling Safety l NOMEX® Temperature Rating on Hose -100°F to +400°F (-73°C to +204°C) Tensile Strength l Abrasion Resistance l Chemical Resistance l Corrosion Resistance l High Temperature Capabilities l Durability l Personal Handling Safety l Other brand materials available such as Polyester, Monel and Hastelloy. Consult Customer Service for minimum quantities and special quotes. Braiding Characteristics Kevlar® and Nomex® are registered trademarks of Dupont. Kynar® is a registered trademark of Arkema, 60 Inc . Technical Measuring Hose Assembly Length 61 Catalog 5162F Technical Catalog 5162F Assembly Length Measurements For NAHAD Hose Assemblies 62 Technical Assembly Length Measurements For SAE Hose Assemblies (unless noted on drawing) 63 Catalog 5162F Technical Catalog 5162F The table below lists a generally accepted summary of properties that we believe to be reliable. Please note that many of these resins are produced in several varieties and property characteristics may vary. Therefore, determination of resin is dependent on the application and this table is only meant to serve as a general guideline. Properties* ASTM or Unit PTFE FEP PFA High Purity PFA MECHANICAL PROPERTIES Specific Gravity D792 D3307 2.13-2.22 – 2.12-2.17 – 2.12-2.17 – – 2.14-2.16 Elongation % D638 D3307 200-450 – 250-330 – 280-400 – – 370 Tensile Strength (psi) D638(psi) D3307(psi) 2500 – 3400 – 3600 – – 3600 Flexural Strength (psi) D790 no break no break no break no break Compressive Strength (psi) D695 700-900 725-2200 725-810 na Tensile Elastic Modulus (Young’s Modulus) (psi) D638 57,000 – 50,000 – 72,500- 87,000 na Flexural Modulus D790(psi) D790 103MPa (103kgf/cm2) 71,000-85,000 0.5-0.6 (5.0-6.0) 78,000-92,000 0.5-0.6 (5.5-6.4) 94,000-99,000 0.6-0.7 (6.6-7.0) – 647-686 – Flex Life (MIT cycles) D2176 >1,000,000 5,000-80,000 10,000-500,000 2000 x 103 Hardness Durometer Shore D D2240 D50-65 D55 D55-D60 D60 Coefficient of Friction (on steel) 0.02 0.05 0.04-0.06 0.05 Abrasion Resistance 1000 cycles Taber 8-90 14-20 0.00-96.75 na Impact Strength IZO.D. 73°F (23°C) notched ft/lbs/in D256 3 no break no break no break THERMAL PROPERTIES Melting Point °C 327 260 305 305 °F 621 500 582 582 Upper Service Temperature(20000h) °C 260 204 260 260 °F 500 400 500 500 Flammability UL 94 V-0 V-0 V-0 V-0 Thermal Conductivity BTU-in/hr-ft2, ºF 1.7-2.08 1.4 1.3 na Thermal Conductivity Cal-cm/sec-cm2, ºC 6 x 10-4 6 x 10-4 6 x 10-6 na Linear Coefficient of Thermal Expansion Min/inºF 73.4-140ºF D696 55.6 46.1-58.3 66.7 na Heat of Fusion BTU/LB 29-37 4-35 13 na Heat of Combustion BTU/LB °F 2200 2200 2300 na Low Temperature Embrittlement °C -268 -268 -268 -268 °F -450 -450 -450 -450 ELECTRICAL PROPERTIES Dielectric Constant D150/103Hz D150/106Hz 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 Dielectric Strength D149/125 MIL D149/10 MIL 500 508 500 500 – 600 >1400 >610 >1400 na Volume Resistivity D257/ohm-cm >1018 >1018 >1018 na Surface Resistivity D257/ohm-cm >1018 >1017 >1017 na GENERAL PROPERTIES Chemical/Solvent Resistance D543 Excellent Excellent Excellent Excellent Refractive Index 1.35 1.338 1.34 1.34 Limiting Oxygen Index, % D2868 >95 >95 >95 na Water Contact Angle Angle to Level 110 114 115 na Water Absorption 24h,% D570 <0.01 <0.01 <0.03 <0.01 Weatherability Excellent Excellent Excellent Excellent *General resin properties; tubing properties may vary. Summary of Properties PTFE, FEP and PFA ® 64 Technical Selection of Hose Diameter From Flow Rate and Velocity cu. ft./min. = .1337 Q The cu. ft. per min. value is the actual volume flow rate under flowing conditions. For air, standard cfm of free air = 7.81 actual cfm when the inlet air is at 100 psig, 68°F. Q = gal per min d = hose or tube I. D. (inch) The Fluid Velocity Nomogram gives the velocity of a liquid as a function of flow rate and inside diameter of the fluid line. The commonly recommended maximum velocities for hydraulic oil systems at 200°F or less are indicated for guidance. Example: At 10 gpm, what is the minimum size within the recommended velocity range for a hydraulic pressure line? The dashed line drawn from the 10 gpm mark on the left hand line to the maximum velocity of 20 fps intersects the middle line at .438" (7/16" I. D. hose or tubing). For a hose application, use 1/2" I. D., the nearest common standard size. This chart is based on the following formulas: vfps = .321Q þd2 4 FLUID VELOCITY NOMOGRAM 65 Catalog 5162F Technical Catalog 5162F Metric JIS Seal-Lok Inverted Flare Flare SAE Str. Trd. Pipe Description End Code Male NPTF Pipe - Rigid - Straight 01 Male NPTF Pipe - Swivel - Straight 13 Male NPTF Pipe - Swivel - 90° Elbow 1L Female NPTF Pipe - Rigid - Straight 02 Female NPSM Pipe - Swivel - Straight (60° Cone) 07 Male SAE Straight Thread with O-ring - Rigid - Straight 05 Male SAE Straight Thread with O-ring - Swivel - Straight 0G Male SAE Straight Thread with O-ring - Swivel - 90° Elbow 0L Male SAE Straight Thread with O-ring - Adjustable - 90° Elbow 35 Male JIC 37° - Rigid - Straight 03 Male JIC 37° - Bulkhead without Locknut - Straight LB Female JIC 37° - Swivel - Straight 06 Female JIC 37° - Swivel - 45° Elbow - Short Drop 37 Female JIC 37° - Swivel - 45° Elbow - Medium Drop L7 Female JIC 37° - Swivel - 90° Elbow - Short Drop 39 Female JIC 37° - Swivel - 90° Elbow - Medium Drop L9 Female JIC 37° - Swivel - 90° Elbow - Long Drop 41 Male SAE 45° - Rigid - Straight 04 Female SAE 45° - Swivel - Straight 08 Female SAE 45 / Swivel - 45° Elbow 77 Female SAE 45 / Swivel - 90° Elbow 79 Female SAE 45 / Swivel - 90° Elbow - Long Drop 81 Female JIC 37°/SAE 45° Dual Flare - Swivel - Straight 06 Male Inverted SAE 45° - Swivel - Straight 28 Male Inverted SAE 45° - Swivel - 45° Elbow 67 Male Inverted SAE 45° - Swivel - 90° Elbow 69 Female Inverted SAE 45° - Rigid - Straight 29 Male Seal-Lok - Rigid - Straight (with O-ring) J0 Male Seal-Lok - Bulkhead without Locknut-Straight (with O-ring) JB Female Seal-Lok - Swivel - Straight - Long JS Female Seal-Lok - Swivel - Straight - Short JC Female Seal-Lok - Swivel - 30° Elbow J2 Female Seal-Lok - Swivel - 22 1/2° Elbow J6 Female Seal-Lok - Swivel - 45° Elbow J7 Female Seal-Lok - Swivel - 90° Elbow - Short Drop J9 Female Seal-Lok - Swivel - 90° Elbow - Medium Drop J5 Female Seal-Lok - Swivel - 90° Elbow - Long Drop J1 Female Metric Swivel - Straight (30° Flare) MU Female BSP Parallel Pipe - Swivel - Straight (30° Flare) FU Male BSP Taper Pipe - Rigid - Straight (60° Cone) UT Female BSP Parallel Pipe - Swivel - Straight (60° Cone) GU Female BSP Parallel Pipe - Swivel - 45° Elbow (60° Cone) G1 Female BSP Parallel Pipe - Swivel - 90° Elbow (60° Cone) G2 Male Metric L - Rigid - Straight (24° Cone) D0 Male Standpipe Metric L - Rigid - Straight 1D Specialty Fr. Gaz BSP Metric Description End Code Female Metric L - Swivel - Straight (Ball Nose) C3 Female Metric L - Swivel - 45° Elbow (Ball Nose) C4 Female Metric L - Swivel - 90° Elbow (Ball Nose) C5 Female Metric L - Swivel - Straight (24° Cone with O-ring) CA Female Metric L - Swivel - 45° Elbow (24° Cone with O-ring) CE Female Metric L - Swivel - 90° Elbow (24° Cone with O-ring) - CF Male Metric S - Rigid - Straight (24° Cone) D2 Male Standpipe Metric S - Rigid - Straight 3D Female Metric S - Swivel - Straight (Ball Nose) C6 Female Metric S - Swivel - 45° Elbow (Ball Nose) C7 Female Metric S - Swivel - 90° Elbow (Ball Nose) C8 Female Metric S - Swivel - Straight (24° Cone with O-ring) C9 Female Metric S - Swivel - 45° Elbow (24° Cone with O-ring) 0C Female Metric S - Swivel - 90° Elbow (24° Cone with O-ring) 1C Male BSP Taper Pipe - Rigid - Straight 91 Female BSP Parallel Pipe - Swivel - Straight (60° Cone) 92 Male BSP Parallel Pipe - Rigid - Straight (60° Cone) D9 Female BSP Parallel Pipe - Swivel - 45° Elbow (60° Cone) B1 Female BSP Parallel Pipe - Swivel - 90° Elbow (60° Cone) B2 Female BSP Parallel Pipe - Swivel - 90° Elbow Block Type (60° Cone) B4 Female BSP Parallel Pipe - Swivel - Straight (Flat Seat) B5 Male BSP Taper Pipe - Rigid - 45° Elbow BV Male BSP Taper Pipe - Rigid - 90° Elbow or Side Outlet BZ Male French Gaz Series - Rigid - Straight (24° Cone) FG Female French Gaz Series - Swivel - Straight (Ball Nose) F4 Male Ferulok Flareless-Rigid-Straight (24° Cone with Nut & Ferrule) 11 Female Ferulok Flareless - Swivel - Straight (24° Cone) 12 DIN Metric Banjo - Straight 49 ANSI B16.5 Flange 4K Female A-Lok® Compression AL Female Cam & Groove FC Sanitary Flange & Step Downs FN Mini Sanitary Flange FV Bulkhead w/Zerk Port Integrated GK Male I-Line® Sanitary H1 Female I-Line® Sanitary H2 Male Sanitary Bevel Seat H4 Female Sanitary Bevel Seat H5 Male Standpipe - Rigid - Straight (Inch Size Tube O.D.) 34 Male Standpipe - Rigid - Straight with V-Notch TW Universal Tube Stub TU Male Rapid Assembly, Straight WU Male Rapid Assembly, 45° Elbow WW Male Rapid Assembly, 90° Elbow WY Standard Fitting Configurations by Connection and End Code 66 Technical Hose Assembly and Crimping How To Use Crimpsource Make your Selections Make your Selections Choose the correct machine. Choose the hose you are crimping. Choose the fitting style. Choose the fittings size. Once you have selected values from each field, hit the search button. The most up-to-date information for crimping is located at www. parker.com/crimpsource. Not only is it accurate, but it is easy. Data Review The Results NOTE: If the hose does not come up, then you cannot crimp that hose on the machine you selected. If the fitting you choose doesn't come up, then that series is not available for that hose. Same with size. Note If the hose does not come up, then the crimper chosen does not work with the selected hose. Note If the chosen fitting/size doesn't come up, the series/size is not available for that hose. 1 2 4 3 67 Catalog 5162F PAGE Series Fittings Catalog 5162F 1 Using a power hose cutoff saw, cut hose squarely. Cut Hose – Visually inspect both ends of hose for square cut. Remove any burrs, loose fibers or wires. Fittings – Verify fitting series corresponds to the selected hose. Visually inspect fitting(s) for a through-hole, threads and damage. 2 Inspection Insertion Depth – Mark hose end with proper insertion depth line. See Hose Fitting Insertion Values, pg. 46 for insertion depths of fitting series that do not incorporate an insertion depth. For covered PTFE hoses, use a sharp knife and light pressure to cut back the cover at least the length of the insertion depth of the fitting. Warning Do not use lubricating oil when installing fittings on hose used in oxygen service. When installing fittings on hose used in oxygen service, lubricate with a non-oil based soap solution. Failure to do so may result in an explosion and personal injury when hose is used. Assembly Prep 3 Assemble hose – Push fitting onto hose slightly and then remove tape. Continue pushing fitting onto hose until fitting reaches depth insertion mark. CAUTION: There are several different sections for Hose Assembly and Crimping. Be sure you are in the section that corresponds to the fitting series you are using. See Table of Contents for listing. Note PTFE Hose should be taped prior to cutting. Hose should be cut at center point of taped section. Hose Assembly & Crimping PTFE Permanent Series 91, 91N 68 Technical 4 Select proper Parkrimp die set. (Reference Crimp Source Instructions, pg. 76 or Crimpsource online at www.parker. com/crimpsource) Die Selection 6 Crimp Die – Place die set into bowl. Die Ring – Place applicable die ring on top of die. Position ring so it is centered on die. Parflex hoses utilize silver die ring. (Reference Crimp Source Instructions, pg. 76 or Crimpsource online at www.parker. com/crimpsource) Die & Spacer Ring Using a premium, quality, lithium-base grease, apply a thin layer of grease on bowl of crimper base plate. Lubricate Bowl 5 7 Assemble hose – Insert hose and fitting from bottom of crimper and up through die set. Position fitting so bottom of fitting skirt rests on die step (PARKALIGN® feature). Note Pump on crimper must not exceed the rated pressure of the crimper being used. Parker Hannifin will not accept responsibility for the operation of or provide warranty coverage for a crimper that is operated by a power unit other than equipment supplied by Parker Hannifin for the express purpose of operating the crimper. Warning Keep fingers and hands away from die-pusher area. Failure to do so may result in personal injury. Crimp While holding hose and fitting in position on die step, crimp fitting onto hose until die ring contacts base plate. Parkalign® Feature Hose Assembly & Crimping PTFE Permanent Series 91, 91N 69 Catalog 5162F Technical Catalog 5162F Measure and verify hose assembly length. Measure crimp diameter of each fitting at top, middle and bottom of shell. Take measurements at a minimum of three places around shell circumference. Verify crimp diameter is within tolerances. (Reference Crimp Source Instructions, pg. 76 or Crimpsource online at www.parker. com/crimpsource) Inspect insertion depth mark at fitting ends. Insertion mark must be visible but not exceed 1/8" from end of crimped fitting shell. Measure & Inspect 8 Hose Assembly & Crimping PTFE Permanent Series 91, 91N 70 Technical 1 Fittings – Inspect each component for possible damage. In addition, inspect socket and nipple for a through-hole and threads. Inspection/Marking Obtain correct hose, fittings and collars per customer order. Inspect to make certain no defects are present on fittings, collars or hose. Using 1” wide filament tape, apply 1 to 1½ wraps of tape tightly around hose at location to be cut. Mark tape in the middle where cut will be made. Tape will be left on during crimping so only ½” width of tape should remain. 2 Cutting Blow ends of hose off / out to remove any debris left from cutting operation. Cut off wires or fabric extending past the end of hose. Using a rotary power cutting saw with a smooth toothless blade, cut hose squarely to proper length. Fitting length being used in the assembly shall be taken into account when calculating hose length. 3 Assembly PAGE series fittings are not one piece but two pieces (insert + collar) and must be properly installed to assure leak free long life assemblies. Hose Assembly & Crimping PTFE Permanent PAGE Series CAUTION: There are several different sections for Hose Assembly and Crimping. Be sure you are in the section that corresponds to the fitting series you are using. See Table of Contents for listing. 71 Catalog 5162F Technical Catalog 5162F 6 Inspect assembly, noting the length. a. Test to correct test pressures to assure no leaks are observed using hydrostatic pressure unit (recommended). Air or nitrogen under water can be used with caution utilizing the proper pressure and procedures for that equipment. Inspect 5 Assembly Crimp assembly only in Parker Approved adjustable crimper. Select correct die and crimp spec from Parker Crimp Source. www.parker.com/crimpsource a. Place assembly into crimp dies so full collar length crimp is obtained. b. Check crimp dimensions in four places around the middle of the crimp circumference. Verify the average of those readings is within crimp specification tolerances. Adjust crimper up or down if needed to obtain proper dimension. c. Crimp opposite end following the same procedures. Hose Assembly & Crimping PTFE Permanent PAGE Series Assembly Blow out all water from the assembly and recheck length. **Note any movement of length and make compensations as needed on next assembly. Package assembly appropriately for customer requirements. a. Orient and place collar on hose end fully. b. Using a taper punch, push punch into tube to enlarge bore of hose so insert just slides into hose. c. Push insert into hose until lock groove of insert is just at end of collar. d. Pull collar out towards end of insert until at correct crimp position on insert of collar. 4 72 Technical 1 Fittings – Inspect each component for possible damage. In addition, inspect socket and nipple for a through-hole and threads. Inspection Hose – Visually inspect both ends of hose for square cut. Remove any burrs, loose fibers or wires. 2 Note When installing sockets on hose, check hose ends to determine if wire braid “necks down” (bends inward). If one end “necks down” use this end to slide sockets onto hose. Slide two sockets over end of hose with bottom of sockets back to back. Position sockets at each end of hose. Assembly Hose Assembly & Crimping Field Attachable - 90 Series CAUTION: There are several different sections for Hose Assembly and Crimping. Be sure you are in the section that corresponds to the fitting series you are using. See Table of Contents for listing. 3 Mount nipple hex in vise. Ensure nipple end extends beyond vise jaws sufficiently to allow installation of hose. Push hose bore onto nipple to size tube and to aid in separating braid before assembling ferrule onto hose. Once completed, remove hose from nipple. Assembly 73 Catalog 5162F Technical Catalog 5162F 4 To complete positioning of sleeve, push hose end with sleeve against a solid flat surface. By hand, push sleeve over end of PTFE core tube and under wire braid. Assembly 5 Verify tube butts against inside shoulder of ferrule. Using a tapered punch, push punch into end of sleeve and tube to set sleeve barbs into tube. Assembly 6 Assemble hose – Using a twisting motion, push hose over nipple until hose is seated against nipple chamfer. Using SAE 20 weight oil, lubricate nipple and socket threads. For stainless steel fittings use Parker ThreadMate™ or a molybdenum type lubricant. Assembly Warning Do not use lubricating oil when installing fittings on hose used in oxygen service. When installing fittings on hose used in oxygen service lubricate with a non-oil based soap solution. Failure to do so may result in an explosion and personal injury when hose is used. Hose Assembly & Crimping Field Attachable - 90 Series 74 Technical 7 Remove assembly from vise and reposition with socket in vise jaws. Ensure socket extends beyond vise jaws far enough to allow nipple to be completely tightened. Push socket forward and hand-start threading of socket to nipple. Caution When tightening socket in vise, do not over tighten vise jaws. Over tightening vise jaws will distort internal threads of socket. Assembly 8 Wrench tighten nipple hex until clearance between hex and socket hex is 1/32" or less. Tighten further to align corners of nipple and socket hexes if necessary. Assembly 9 Measure and verify hose assembly length. Measure & Inspect Hose Assembly & Crimping Field Attachable - 90 Series 75 Catalog 5162F Technical Catalog 5162F Parker Safety Guide For selecting and using Hose, Tubing, Fittings, and Related Accessories ! Parker Safety Guide for Selecting and Using Hose, Tubing, Fittings and Related Accessories Publication No. 4400-B.1 Revised: November 2007 WARNING: Failure or improper selection or improper use of hose, tubing, fittings, assemblies or related accessories (“Products”) can cause death, personal injury and property damage. Possible consequences of failure or improper selection or improper use of these Products include but are not limited to: • Fittings thrown off at high speed. • High velocity fluid discharge. • Explosion or burning of the conveyed fluid. • Electrocution from high voltage electric powerlines. • Contact with suddenly moving or falling objects that are controlled by the conveyed fluid. • Injections by high-pressure fluid discharge. • Dangerously whipping Hose. • Contact with conveyed fluids that may be hot, cold, toxic or otherwise injurious. • Sparking or explosion caused by static electricity buildup or other sources of electricity. • Sparking or explosion while spraying paint or flammable liquids. • Injuries resulting from inhalation, ingestion or exposure to fluids. Before selecting or using any of these Products, it is important that you read and follow the instructions below. Only Hose from Parker’s Stratoflex Products Division is approved for in flight aerospace applications. 1.0 GENERAL INSTRUCTIONS 1.1 Scope: This safety guide provides instructions for selecting and using (including assembling, installing, and maintaining) these Products. For convenience, all rubber and/or thermoplastic products commonly called “hose” or “tubing” are called “Hose” in this safety guide. All assemblies made with Hose are called “Hose Assemblies”. All products commonly called “fittings”, “couplings” or “adapters” are called “Fittings”. All related accessories (including crimping and swaging machines and tooling) are called “Related Accessories”. This safety guide is a supplement to and is to be used with the specific Parker publications for the specific Hose, Fittings and Related Accessories that are being considered for use. Parker publications are available at www.parker.com. SAE J1273 ( w w w. s a e . o r g ) a n d I S O 1 7 1 6 5 2 ( w w w. a n s i . o r g ) a l s o p r o - vide recommended practices for hydraulic Hose Assemblies. 1.2 Fail-Safe: Hose, Hose Assemblies and Fittings can and do fail without warning for many reasons. Design all systems and equipment in a fail safe mode, so that failure of the Hose, Hose Assembly or Fitting will not endanger persons or property. 1.3 Distribution: Provide a copy of this safety guide to each person responsible for selecting or using Hose and Fitting products. Do not select or use Parker Hose or Fittings without thoroughly reading and understanding this safety guide as well as the specific Parker publications for the Products. 1.4 User Responsibility: Due to the wide variety of operating conditions and applications for Hose and Fittings, Parker does not represent or warrant that any particular Hose or Fitting is suitable for any specific end use system. This safety guide does not analyze all technical parameters that must be considered in selecting a product. The user, through its own analysis and testing, is solely responsible for: • Making the final selection of the Products. • Assuring that the user’s requirements are met and that the application presents no health or safety hazards. • Providing all appropriate health and safety warnings on the equipment on which the Products are used. • Assuring compliance with all applicable government and industry standards. 1.5 Additional Questions: Call the appropriate Parker technical service department if you have any questions or require any additional information. See the Parker publication for the Products being considered or used, or call 1 800 CPARKER, or go to www.parker.com, for telephone numbers of the appropriate technical service department. 2.0 HOSE AND FITTING SELECTION INSTRUCTIONS 2.1 Electrical Conductivity: Certain applications require that the Hose be nonconductive to prevent electrical current flow. Other applications require the Hose and the Fittings and the Hose/Fitting interface to be sufficiently conductive to drain off static electricity. Extreme care must be exercised when selecting Hose and Fittings for these or any other applications in which electrical conductivity or nonconductivity is a factor. The electrical conductivity or nonconductivity of Hose and Fittings is dependent upon many factors and may be susceptible to change. These factors include but are not limited to the various materials used to make the Hose and the Fittings, Fitting finish (some Fitting finishes are electrically conductive while others are nonconductive), manufacturing methods (including moisture control), how the Fittings contact the Hose, age and amount of deterioration or damage or other changes, moisture content of the Hose at any particular time, and other factors. The following are considerations for electrically nonconductive and conductive Hose. For other applications consult the individual catalog pages and the appropriate industry or regulatory standards for proper selection. 2.1.1 Electrically Nonconductive Hose: Certain applications require that the Hose be nonconductive to prevent electrical current flow or to maintain electrical isolation. For applications that require Hose to be electrically nonconductive, including but not limited to applications near high voltage electric lines, only special nonconductive Hose can be used. The manufacturer of the equipment in which the nonconductive Hose is to be used must be consulted to be certain that the Hose and Fittings that are selected are proper for the application. Do not use any Parker Hose or Fittings for any such application requiring nonconductive Hose, including but not limited to applications near high voltage electric lines, unless (i) the application is expressly approved in the Parker technical publication for the product, (ii) the Hose is marked “nonconductive”, and (iii) the manufacturer of the equipment on which the Hose is to be used specifically approves the particular Parker Hose and Fittings for such use. 2.1.2 Electrically Conductive Hose: Parker manufactures special Hose for certain applications that require electrically conductive Hose. Parker manufactures special Hose for conveying paint in airless paint spraying applications. This Hose is labeled “Electrically Conductive Airless Paint Spray Hose” on its layline and packaging. This Hose must be properly connected to the appropriate Parker Fittings and properly grounded in order to dissipate dangerous static charge buildup, which occurs in all airless paint spraying applications. Do not use any other Hose for airless paint spraying, even if electrically conductive. Use of any other Hose or failure to properly connect the Hose can cause a fire or an explosion resulting in death, personal injury, and property damage. Parker manufactures a special Hose for certain compressed natural gas (“CNG”) applications where static electricity buildup may occur. Parker CNG Hose assemblies comply with the requirements of ANSI/IAS NGV 4.2-1999; CSA 12.52-M99, “Hoses for Natural Gas Vehicles and Dispensing Systems” (www.ansi.org). This Hose is labeled “Electrically Conductive for CNG Use” on its layline and packaging. This Hose must be properly connected to the appropriate Parker Fittings and properly grounded in order to dissipate dangerous static charge buildup, which occurs in, for example, high velocity 76 Technical 2.2 Pressure: Hose selection must be made so that the published maximum working pressure of the Hose and Fittings are equal to or greater than the maximum system pressure. The maximum working pressure of a Hose Assembly is the lower of the respective published maximum working pressures of the Hose and the Fittings used. Surge pressures or peak transient pressures in the system must be below the published maximum working pressure for the Hose. Surge pressures and peak pressures can usually only be determined by sensitive electrical instrumentation that measures and indicates pressures at millisecond intervals. Mechanical pressure gauges indicate only average pressures and cannot be used to determine surge pressures or peak transient pressures. Published burst pressure ratings for Hose is for manufacturing test purposes only and is no indication that the Product can be used in applications at the burst pressure or otherwise above the published maximum recommended working pressure. 2.3 Suction: Hoses used for suction applications must be selected to insure that the Hose will withstand the vacuum and pressure of the system. Improperly selected Hose may collapse in suction application. 2.4 Temperature: Be certain that fluid and ambient temperatures, both steady and transient, do not exceed the limitations of the Hose. Temperatures below and above the recommended limit can degrade Hose to a point where a failure may occur and release fluid. Properly insulate and protect the Hose Assembly when routing near hot objects (e.g. manifolds). Do not use any Hose in any application where failure of the Hose could result in the conveyed fluids (or vapors or mist from the conveyed fluids) contacting any open flame, molten metal, or other potential fire ignition source that could cause burning or explosion of the conveyed fluids or vapors. 2.5 Fluid Compatibility: Hose Assembly selection must assure compatibility of the Hose tube, cover, reinforcement, and Fittings with the fluid media used. See the fluid compatibility chart in the Parker publication for the product being considered or used. This information is offered only as a guide. Actual service life can only be determined by the end user by testing under all extreme conditions and other analysis. Hose that is chemically compatible with a particular fluid must be assembled using Fittings and adapters containing likewise compatible seals. 2.6 Permeation: Permeation (that is, seepage through the Hose) will occur from inside the Hose to outside when Hose is used with gases, liquid and gas fuels, and refrigerants (including but not limited to such materials as helium, diesel fuel, gasoline, natural gas, or LPG). This permeation may result in high concentrations of vapors which are potentially flammable, explosive, or toxic, and in loss of fluid. Dangerous explosions, fires, and other hazards can result when using the wrong Hose for such applications. The system designer must take into account the fact that this permeation will take place and must not use Hose if this permeation could be hazardous. The system designer must take into account all legal, government, insurance, or any other special regulations which govern the use of fuels and refrigerants. Never use a Hose even though the fluid compatibility is acceptable without considering the potential hazardous effects that can result from permeation through the Hose Assembly. Permeation of moisture from outside the Hose to inside the Hose will also occur in Hose assemblies, regardless of internal pressure. If this moisture permeation would have detrimental effects (particularly, but not limited to refrigeration and air conditioning systems), incorporation of sufficient drying capacity in the system or other appropriate system safeguards should be selected and used. 2.7 Size: Transmission of power by means of pressurized fluid varies with pressure and rate of flow. The size of the components must be adequate to keep pressure losses to a minimum and avoid damage due to heat generation or excessive fluid velocity. 2.8 Routing: Attention must be given to optimum routing to minimize inherent problems (kinking or flow restriction due to Hose collapse, twisting of the Hose, proximity to hot objects or heat sources). For additional routing recommendations see SAE J1273 and ISO 17165-2. Hose Assemblies have a finite life and if possible, should be installed in a manner that allows for ease of inspection and future replacement. Rubber Hose because of its relative short life, should not be used in residential and commercial buildings for HVAC (heating, ventilating and air conditioning) applications. 2.9 Environment: Care must be taken to insure that the Hose and Fittings are either compatible with or protected from the environment (that is, surrounding conditions) to which they are exposed. Environmental conditions including but not limited to ultraviolet radiation, sunlight, heat, ozone, moisture, water, salt water, chemicals and air pollutants can cause degradation and premature failure. 2.10 Mechanical Loads: External forces can significantly reduce Hose life or cause failure. Mechanical loads which must be considered include excessive flexing, twist, kinking, tensile or side loads, bend radius, and vibration. Use of swivel type Fittings or adapters may be required to insure no twist is put into the Hose. Unusual applications may require special testing prior to Hose selection. 2.11 Physical Damage: Care must be taken to protect Hose from wear, snagging, kinking, bending smaller that minimum bend radius and cutting, any of which can cause premature Hose failure. Any Hose that has been kinked or bent to a radius smaller than the minimum bend radius, and any Hose that has been cut or is cracked or is otherwise damaged should be removed and discarded. 2.12 Proper End Fitting: See instructions 3.2 through 3.5. These recommendations may be substantiated by testing to industry standards such as SAE J517 for hydraulic applications, or MIL-A-5070, AS1339, or AS3517 for Hoses from Parker’s Stratoflex Products Division for aerospace applications. 2.13 Length: When establishing a proper Hose length, motion absorption, Hose length changes due to pressure, and Hose and machine tolerances and movement must be considered. 2.14 Specifications and Standards: When selecting Hose and Fittings, government, industry, and Parker specifications and recommendations must be reviewed and followed as applicable. 2.15 Hose Cleanliness: Hose components may vary in cleanliness levels. Care must be taken to insure that the Hose Assembly selected has an adequate level of cleanliness for the application. 2.16 Fire Resistant Fluids: Some fire resistant fluids that are to be conveyed by Hose require use of the same type of Hose as used with petroleum base fluids. Some such fluids require a special Hose, while a few fluids will not work with any Hose at all. See instructions 2.5 and 1.5. The wrong Hose may fail after a very short service. In addition, all liquids but pure water may burn fiercely under certain conditions, and even pure water leakage may be hazardous. 2.17 Radiant Heat: Hose can be heated to destruction without contact by such nearby items as hot manifolds or molten metal. The same heat source may then initiate a fire. This can occur despite the presence of cool air around the Hose. 2.18 Welding or Brazing: When using a torch or arc welder in close proximity to hydraulic lines, the hydraulic lines should be removed or shielded with appropriate fire resistant materials. Flame or weld spatter could burn through the Hose and possibly ignite escaping fluid resulting in a catastrophic failure. Heating of plated parts, including Hose Fittings and adapters, above 450°F (232°C) such as during welding, brazing or soldering may emit deadly gases. Safety Guide CNG dispensing or transfer. Do not use any other Hose for CNG applications where static charge buildup may occur, even if electrically conductive. Use of other Hoses in CNG applications or failure to properly connect or ground this Hose can cause a fire or an explosion resulting in death, personal injury, and property damage. Care must also be taken to protect against CNG permeation through the Hose wall. See section 2.6, Permeation, for more information. Parker CNG Hose is intended for dispenser and vehicle use at a maximum temperature of 180°F (82°C). Parker CNG Hose should not be used in confined spaces or unventilated areas or areas exceeding 180°F (82°C). Final assemblies must be tested for leaks. CNG Hose Assemblies should be tested on a monthly basis for conductivity per ANSI/IAS NGV 4.2-1999; CSA 12.52-M99. Parker manufactures special Hose for aerospace in flight applications. Aerospace in flight applications employing Hose to transmit fuel, lubricating fluids and hydraulic fluids require a special Hose with a conductive inner tube. This Hose for in flight applications is available only from Parker’s Stratoflex Products Division. Do not use any other Parker Hose for in flight applications, even if electrically conductive. Use of other Hoses for in flight applications or failure to properly connect or ground this Hose can cause a fire or an explosion resulting in death, personal injury and property damage. These Hose assemblies for in flight applications must meet all applicable aerospace industry, aircraft engine and aircraft requirements. 77 Catalog 5162F Warranty 2.19 Atomic Radiation: Atomic radiation affects all materials used in Hose assemblies. Since the long-term effects may be unknown, do not expose Hose assemblies to atomic radiation. 2.20 Aerospace Applications: The only Hose and Fittings that may be used for in-flight aerospace applications are those available from Parker’s Stratoflex Products Division. Do not use any other Hose or Fittings for inflight applications. Do not use any Hose or Fittings from Parker’s Stratoflex Products Division with any other Hose or Fittings, unless expressly approved in writing by the engineering manager or chief engineer of Stratoflex Products Division and verified by the user’s own testing and inspection to aerospace industry standards. 2.21 Unlocking Couplings: Ball locking Couplings or other Fittings with quick disconnect ability can unintentionally disconnect if they are dragged over obstructions, or if the sleeve or other disconnect member is bumped or moved enough to cause disconnect. Threaded Fittings should be considered where there is a potential for accidental uncoupling. 3.0 HOSE AND FITTINGS ASSEMBLY AND INSTALLATION INSTRUCTIONS 3.1 Component Inspection: Prior to assembly, a careful examination of the Hose and Fittings must be performed. All components must be checked for correct style, size, catalog number, and length. The Hose must be examined for cleanliness, obstructions, blisters, cover looseness, kinks, cracks, cuts or any other visible defects. Inspect the Fitting and sealing surfaces for burrs, nicks, corrosion or other imperfections. Do NOT use any component that displays any signs of nonconformance. 3.2 Hose and Fitting Assembly: Do not assemble a Parker Fitting on a Parker Hose that is not specifically listed by Parker for that Fitting, unless authorized in writing by the engineering manager or chief engineer of the appropriate Parker division. Do not assemble a Parker Fitting on another manufacturer’s Hose or a Parker Hose on another manufacturer’s Fitting unless (i) the engineering manager or chief engineer of the appropriate Parker division approves the Assembly in writing or that combination is expressly approved in the appropriate Parker literature for the specific Parker product, and (ii) the user verifies the Assembly and the application through analysis and testing. For Parker Hose that does not specify a Parker Fitting, the user is solely responsible for the selection of the proper Fitting and Hose Assembly procedures. See instruction 1.4. To prevent the possibility of problems such as leakage at the Fitting or system contamination, it is important to completely remove all debris from the cutting operation before installation of the Fittings. The Parker published instructions must be followed for assembling the Fittings on the Hose. These instructions are provided in the Parker Fitting catalog for the specific Parker Fitting being used, or by calling 1-800-CPARKER, or at www.parker.com. 3.3 Related Accessories: Do not crimp or swage any Parker Hose or Fitting with anything but the listed swage or crimp machine and dies in accordance with Parker published instructions. Do not crimp or swage another manufacturer’s Fitting with a Parker crimp or swage die unless authorized in writing by the engineering manager or chief engineer of the appropriate Parker division. 3.4 Parts: Do not use any Parker Fitting part (including but not limited to socket, shell, nipple, or insert) except with the correct Parker mating parts, in accordance with Parker published instructions, unless authorized in writing by the engineering manager or chief engineer of the appropriate Parker division. 3.5 Field Attachable/Permanent: Do not reuse any field attachable Hose Fitting that has blown or pulled off a Hose. Do not reuse a Parker permanent Hose Fitting (crimped or swaged) or any part thereof. Complete Hose Assemblies may only be reused after proper inspection under section 4.0. Do not assemble Fittings to any previously used hydraulic Hose that was in service, for use in a fluid power application. 3.6 Pre-Installation Inspection: Prior to installation, a careful examination of the Hose Assembly must be performed. Inspect the Hose Assembly for any damage or defects. DO NOT use any Hose Assembly that displays any signs of nonconformance. 3.7 Minimum Bend Radius: Installation of a Hose at less than the minimum listed bend radius may significantly reduce the Hose life. Particular attention must be given to preclude sharp bending at the Hose to Fitting juncture. Any bending during installation at less than the minimum bend radius must be avoided. If any Hose is kinked during installation, the Hose must be discarded. 3.8 Twist Angle and Orientation: Hose Assembly installation must be such that relative motion of machine components does not produce twisting. 3.9 Securement: In many applications, it may be necessary to restrain, protect, or guide the Hose to protect it from damage by unnecessary flexing, pressure surges, and contact with other mechanical components. Care must be taken to insure such restraints do not introduce additional stress or wear points. 3.10 Proper Connection of Ports: Proper physical installation of the Hose Assembly requires a correctly installed port connection insuring that no twist or torque is transferred to the Hose when the Fittings are being tightened or otherwise during use. 3.11 External Damage: Proper installation is not complete without insuring that tensile loads, side loads, kinking, flattening, potential abrasion, thread damage or damage to sealing surfaces are corrected or eliminated. See instruction 2.10. 3.12 System Checkout: All air entrapment must be eliminated and the system pressurized to the maximum system pressure (at or below the Hose maximum working pressure) and checked for proper function and freedom from leaks. Personnel must stay out of potential hazardous areas while testing and using. 3.13 Routing: The Hose Assembly should be routed in such a manner so if a failure does occur, the escaping media will not cause personal injury or property damage. In addition, if fluid media comes in contact with hot surfaces, open flame or sparks, a fire or explosion may occur. See section 2.4. 3.14 Ground Fault Equipment Protection Devices (GFEPDs): WARNING! Fire and Shock Hazard. To minimize the danger of fire if the heating cable of a Multitube bundle is damaged or improperly installed, use a Ground Fault Equipment Protection Device. Electrical fault currents may be insufficient to trip a conventional circuit breaker. For ground fault protection, the IEEE 515:1989 (www.ansi.org) standard for heating cables recommends the use of GFEPDs with a nominal 30 milliampere trip level for “piping systems in classified areas, those areas requiring a high degree of maintenance, or which may be exposed to physical abuse or corrosive atmospheres”. 4.0 HOSE AND FITTING MAINTENANCE AND REPLACEMENT INSTRUCTIONS 4.1 Even with proper selection and installation, Hose life may be significantly reduced without a continuing maintenance program. The severity of the application, risk potential from a possible Hose failure, and experience with any Hose failures in the application or in similar applications should determine the frequency of the inspection and the replacement for the Products so that Products are replaced before any failure occurs. A maintenance program must be established and followed by the user and, at minimum, must include instructions 4.2 through 4.7. 4.2 Visual Inspection Hose/Fitting: Any of the following conditions require immediate shut down and replacement of the Hose Assembly: • Fitting slippage on Hose; • Damaged, cracked, cut or abraded cover (any reinforcement exposed); Safety Guide 78 Warranty • Hard, stiff, heat cracked, or charred Hose; • Cracked, damaged, or badly corroded Fittings; • Leaks at Fitting or in Hose; • Kinked, crushed, flattened or twisted Hose; and • Blistered, soft, degraded, or loose cover. 4.3 Visual Inspection All Other: The following items must be tightened, repaired, corrected or replaced as required: • Leaking port conditions; • Excess dirt buildup; • Worn clamps, guards or shields; and • System fluid level, fluid type, and any air entrapment. 4.4 Functional Test: Operate the system at maximum operating pressure and check for possible malfunctions and leaks. Personnel must avoid potential hazardous areas while testing and using the system. See section 2.2. 4.5 Replacement Intervals: Hose assemblies and elastomeric seals used on Hose Fittings and adapters will eventually age, harden, wear and deteriorate under thermal cycling and compression set. Hose Assemblies and elastomeric seals should be inspected and replaced at specific replacement intervals, based on previous service life, government or industry recommendations, or when failures could result in unacceptable downtime, damage, or injury risk. See section 1.2. Hose and Fittings may be subjected to internal mechanical and/or chemical wear from the conveying fluid and may fail without warning. The user must determine the product life under such circumstances by testing. Also see section 2.5. 4.6 Hose Inspection and Failure: Hydraulic power is accomplished by utilizing high pressure fluids to transfer energy and do work. Hoses, Fittings and Hose Assemblies all contribute to this by transmitting fluids at high pressures. Fluids under pressure can be dangerous and potentially lethal and, therefore, extreme caution must be exercised when working with fluids under pressure and handling the Hoses transporting the fluids. From time to time, Hose Assemblies will fail if they are not replaced at proper time intervals. Usually these failures are the result of some form of misapplication, abuse, wear or failure to perform proper maintenance. When Hoses fail, generally the high pressure fluids inside escape in a stream which may or may not be visible to the user. Under no circumstances should the user attempt to locate the leak by “feeling” with their hands or any other part of their body. High pressure fluids can and will penetrate the skin and cause severe tissue damage and possibly loss of limb. Even seemingly minor hydraulic fluid injection injuries must be treated immediately by a physician with knowledge of the tissue damaging properties of hydraulic fluid. If a Hose failure occurs, immediately shut down the equipment and leave the area until pressure has been completely released from the Hose Assembly. Simply shutting down the hydraulic pump may or may not eliminate the pressure in the Hose Assembly. Many times check valves, etc., are employed in a system and can cause pressure to remain in a Hose Assembly even when pumps or equipment are not operating. Tiny holes in the Hose, commonly known as pinholes, can eject small, dangerously powerful but hard to see streams of hydraulic fluid. It may take several minutes or even hours for the pressure to be relieved so that the Hose Assembly may be examined safely. Once the pressure has been reduced to zero, the Hose Assembly may be taken off the equipment and examined. It must always be replaced if a failure has occurred. Never attempt to patch or repair a Hose Assembly that has failed. Consult the nearest Parker distributor or the appropriate Parker division for Hose Assembly replacement information. Never touch or examine a failed Hose Assembly unless it is obvious that the Hose no longer contains fluid under pressure. The high pressure fluid is extremely dangerous and can cause serious and potentially fatal injury. 4.7 Elastomeric seals: Elastomeric seals will eventually age, harden, wear and deteriorate under thermal cycling and compression set. Elastomeric seals should be inspected and replaced. 4.8 Refrigerant gases: Special care should be taken when working with refrigeration systems. Sudden escape of refrigerant gases can cause blindness if the escaping gases contact the eye and can cause freezing or other severe injuries if it contacts any other portion of the body. 4.9 Compressed natural gas (CNG): Parker CNG Hose Assemblies should be tested after installation and before use, and at least on a monthly basis per ANSI/IAS NGV 4.2-1999; CSA 12.52-M99 Section 4.2 “Visual Inspection Hose/Fitting”. The recommended procedure is to pressurize the Hose and check for leaks and to visually inspect the Hose for damage. Caution: Matches, candles, open flame or other sources of ignition shall not be used for Hose inspection. Leak check solutions should be rinsed off after use. 5.0 HOSE STORAGE 5.1 Age Control: Hose and Hose Assemblies must be stored in a manner that facilitates age control and first-in and first-out usage based on manufacturing date of the Hose and Hose Assemblies. The shelf life of rubber Hose or Hose Assemblies that have passed visual inspection and a proof test is 10 years (40 quarters) from the date of manufacture. The shelf life of thermoplastic and polytetrafluoroethylene Hose or Hose Assemblies is considered to be unlimited. 5.2 Storage: Stored Hose and Hose Assemblies must not be subjected to damage that could reduce their expected service life and must be placed in a cool, dark and dry area with the ends capped. Stored Hose and Hose Assemblies must not be exposed to temperature extremes, ozone, oils, corrosive liquids or fumes, solvents, high humidity, rodents, insects, ultraviolet light, electromagnetic fields or radioactive materials. Safety Guide 79 Catalog 5162F Warranty Offer of Sale The items described in this document and other documents or descriptions provided by Parker Hannifin Corporation, as subsidiaries and its authorized distributors are hereby offered for sale at prices to be established by Parker Hannifin Corporation, its subsidiaries and its authorized distributors. This offer and its acceptance by any customer (“Buyer”) shall be governed by all of the following Terms and Conditions. Buyer’s order for any such item, when communicated to Parker Hannifin Corporation, its subsidiary or an authorized distributor (“Seller”) verbally or in writing, shall constitute acceptance of this offer. 1. Terms and Conditions of Sale: All descriptions, quotations, proposals, offers, acknowledgments, acceptances and sales of Seller’s products are subject to and shall be governed exclusively by the terms and conditions stated herein. Buyer’s acceptance of any offer to sell is limited to these terms and conditions. Any terms or conditions in addition to, or inconsistent with those stated herein, proposed by Buyer in any acceptance of an offer by Seller, are hereby objected to. No such additional, different or inconsistent terms and conditions shall become part of the contract between Buyer and Seller unless expressly accepted in writing by Seller. Seller’s acceptance of any offer to purchase by Buyer is expressly conditional upon Buyer’s assent to all the terms and conditions stated herein, including any terms in addition to, or inconsistent with those contained in Buyer’s offer. Acceptance of Seller’s products shall in all events constitute such assent. 2. Payment: Payment shall be made by Buyer net 30 days from the date of delivery of the items purchased hereunder. Any claims by Buyer for omissions or shortages in a shipment shall be waived unless Seller receives notice thereof within 30 days after Buyer’s receipt of the shipment. 3. Delivery: Unless otherwise provided on the face hereof, delivery shall be made F.O.B. Seller’s plant. Regardless of the method of delivery, however, risk of loss shall pass to Buyer upon Seller’s delivery to a carrier. Any delivery dates shown are approximate only and Seller shall have no liability for any delays in delivery. 4. Warranty: Seller warrants that the items sold thereunder shall be free from defects in material or workmanship for a period of 365 days from the date of shipment to Buyer, or 2,000 hours of use, whichever expires first. THIS WARRANTY COMPRISES THE SOLE AND ENTIRE WARRANTY PERTAINING TO ITEMS PROVIDED HEREUNDER. SELLER MAKES NO OTHER WARRANTY, GAURANTEE, OR REPRESENTATION OF ANY KIND WHATSOEVER. ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO, MERCHANTIBILITY AND FITNESS FOR PURPOSE, WHETHER EXPRESS, IMPLIED, OR ARISING BY OPERATION OF LAW, TRADE USAGE, OR COURSE OF DEALING ARE HEREBY DISCLAIMED. NOTWITHSTANDING THE FOREGOING, THERE ARE NO WARRANTIES WHATSOEVER ON ITEMS BUILT OR ACQUIRED WHOLELY OR PARTIALLY, TO BUYER’S DESIGNS OR SPECIFICATIONS. 5. Limitation Of Remedy: SELLER’S LIABILITY ARISING FROM OR IN ANY WAY CONNECTED WITH THE ITEMS SOLD OR THIS CONTRACT SHALL BE LIMITED EXCLUSIVELY TO REPAIR OR REPLACEMENT OF THE ITEMS SOLD OR REFUND OF THE PURCHASE PRICE PAID BY BUYER, AT SELLER’S SOLE OPTION. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY KIND OR NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS ARISING FROM OR IN ANY WAY CONNECTED WITH THIS AGREEMENT OR ITEMS SOLD HEREUNDER, WHETHER ALLEGED TO ARISE FROM BREACH OF CONTRACT, EXPRESS OR IMPLIED WARRANTY, OR IN TORT, INCLUDING WITHOUT LIMITATION, NEGLIGENCE, FAILURE TO WARN OR STRICT LIABILITY. 6. Changes, Reschedules and Cancellations: Buyer may request to modify the designs or specifications for the items sold herunder as well as the quantities and delivery dates thereof, or may request to cancel all or part of this order, however, no such requested modification or cancellation shall become part of the contract between Buyer and Seller unless accepted by Seller in a written amendment to this Agreement. Acceptance of any such requested modification or cancellation shall be at Seller’s discretion, and shall be upon such terms and conditions as Seller may require. 7. Special Tooling: A tooling charge may be imposed for any special tooling, including without limitation, dies, fixtures, molds and patterns, acquired to manufacture items sold pursuant to this contract. Such special tooling shall be and remain Seller’s property notwithstanding payment of any charges by Buyer. In no event will Buyer acquire any interest in apparatus belonging to Seller which is utilized in the manufacture of the items sold hereunder, even if such apparatus has been specially converted or adapted for such manufacture and notwithstanding any charges paid by Buyer. Unless otherwise agreed, Seller shall have the right to alter, discard or otherwise dispose of any special tooling or other property in its sole discretion at any time. 8. Buyer’s Property: Any designs, tools, patterns, materials, drawings, confidential information or equipment furnished by Buyer or any other items which become Buyer’s property, may be considered obsolete and may be destroyed by Seller after two (2) consecutive years have elapsed without Buyer placing an order for the items which are manufactured using such property. Seller shall not be responsible for any loss or damage to such property while it is in Seller’s possession or control. 9. Taxes: Unless otherwise indicated on the face hereof, all prices and charges are exclusive of excise, sales, use, property, occupational or like taxes which may be imposed by any taxing authority upon the manufacture, sale or delivery of the items sold hereunder. If any such taxes must be paid by Seller of if Seller is liable for the collection of such tax, the amount thereof shall be in additon to the amounts for the items sold. Buyer agrees to pay all such taxes or to reimburse Seller therefore upon receipt of its invoice. If Buyer claims exemption from any sales, use or other tax imposed by any taxing authority, Buyer shall save Seller harmless from and against any such tax, together with any interest or penalties thereon which may be assessed if the items are held to be taxable. 10. Indemnity For Infringement of Intellectual Property Rights: Seller shall have no liability for infringement of any patents, trademarks, copyrights, trade dress, trade secrets or similar rights except as provided in this Part 10. Seller will defend and indemnify Buyer against allegations of infringement of U.S. patents, U.S. trademarks, copyrights, trade dress and trade secrets (hereinafter “Intellectual Property Rights”). Seller will defend at its expense and will pay the cost of any settlement or damages awarded in an action brought against Buyer based on an allegation that an item sold pursuant to this contract infringes in the Intellectual Property Rights of a third party. Seller’s obligation to defend and indemnify Buyer is contingent on Buyer notifying Seller within ten (10) days after Buyer becomes aware of such allegations of infringement, and Seller having sole control over the defense of any allegations or actions including all negotiations for settlement or compromise. If an item sold hereunder is subject to a claim that it infringes the Intellectual Property Rights of a third party, Seller may, at its sole expense and options, procure for Buyer the right to continue using said item, replace or modify said item so as to make it noninfringing, or offer to accept return of said item and return the purchase price less a reasonable allowance for depreciation. Notwithstanding the foregoing, Seller shall have no liability for claims of infringement based on information provided by Buyer, or directed to items delivered hereunder for which the designs are specified in whole or part by Buyer, or infringements resulting from the modification, combination or use in a system of any item sold hereunder. The foregoing provisions of this Part 10 shall constitute Seller’s sole and exclusive liability and Buyer’s sole and exclusive remedy for infringement of Intellectual Property Rights. If a claim is based on information provided by Buyer or if the design for an item delivered hereunder is specified in whole or in part by Buyer, Buyer shall defend and indemnify Seller for all costs, expenses or judgments resulting from any claim that such item infriges any patent, trademark, copyright, trade dress, trade secret or any similiar right. 11. Force Majeure: Seller does not assume the risk of and shall not be liable for delay or failure to perform any of Seller’s obligations by reason of circumstances beyond the reasonable control of Seller (hereinafter “Events of Force Majeure”). Events of Force Majeure shall include without limitation, accidents, acts of God, strikes or labor disputes, acts, laws, rules or regulations of any government or government agency, fires, floods, delays or failures in delivery of carriers or suppliers, shortages of materials and any other cause beyond Seller’s control. 12. Entire Agreement/Governing Law: The terms and conditions set forth herein, together with any amendments, modifications and any different terms or conditions expressly accepted by Seller in writing, shall constitute the entire Agreement concerning the items sold, and there are no oral or other representations or agreements which pertain thereto. This Agreement shall be governed in all respects by the law of the State of Ohio. No actions arising out of the sale of the items sold hereunder or this Agreement may be brought by either party more than two (2) years after the cause of action accrues. 5/14 80 INDEX 090...........................................................57 10191N.....................................................44 10391N.....................................................44 10691N.....................................................44 10691NRD................................................44 10694.......................................................51 10695.......................................................51 10791N.....................................................45 10891N.....................................................45 12891N.....................................................45 13491N.....................................................46 13791N.....................................................46 13991N.....................................................46 14191N.....................................................46 16191N.....................................................47 16791N.....................................................47 16991N.....................................................47 17791N.....................................................47 17991N.....................................................48 19291N.....................................................50 1AL91N.....................................................48 1B291N....................................................50 1FN91N....................................................48 1J191N.....................................................49 1J791N.....................................................49 1J991N.....................................................49 1JC91N....................................................50 1P691N.....................................................48 1Q191N....................................................49 1TU91N....................................................50 20090.......................................................56 20190.......................................................52 20690.......................................................53 20890.......................................................53 22890.......................................................53 23490.......................................................53 23790.......................................................54 23990.......................................................54 26190.......................................................54 26790.......................................................54 26990.......................................................55 27790.......................................................55 27990.......................................................55 60HAB......................................................56 61HAB......................................................57 90 Series...................................................52 91N Series................................................43 94 Series...................................................51 95 Series...................................................51 944B.........................................................40 955B.........................................................41 Accessories..............................................58 Armor Guard.............................................59 B2.............................................................59 CBV..........................................................25 CL-S.........................................................30 Collars......................................................36 Convoluted Hose............................ 3, 15-21 Convoluted Tubing...................................25 Crimp Fittings.....................................27, 42 CWV.........................................................25 EPDM Covered Hose...............................24 E-S............................................................31 FBS-S.......................................................31 Field Attachable Fitting.............................52 FIL-S.........................................................31 Fire Sleeve................................................58 Fittings................................................27, 42 FJX.............................................................. 33 Flanges.................................................. 35, 48 Flare-Seal® Hose.................................... 3, 20 FORFS......................................................... 33 FP-S............................................................ 32 Heat Shrink.................................................. 59 High Pressure Hose............................... 40, 41 Industrial Hose........................................ 2, 37 Industrial Fittings, Crimp............................. 42 Industrial Fittings, Field Attach. ������������������ 52 MBS-S......................................................... 31 MIL-S........................................................... 32 MP-S........................................................... 32 MSAN-S...................................................... 35 NCB............................................................. 17 NCW............................................................ 17 Nomex......................................................... 17 Non Conductive Hose................................... 1 Open Pitch Hose.................................... 15-19 PAGE Series Fittings................................... 30 PAGE-flex SBF™......................................... 14 PC300.......................................................... 36 PCBV........................................................... 19 PCBV-FS..................................................... 21 PCB............................................................. 16 PCW............................................................ 16 PCWV.......................................................... 19 PCWV-FS.................................................... 21 PF................................................................ 34 Platinum Cured Hose.............................. 4, 23 PLCF-S........................................................ 33 RC300......................................................... 36 RCTB........................................................... 24 RCTW.......................................................... 24 Rubber Covered Hose................................. 24 S30/S30B.................................................... 38 S40/S40B.................................................... 39 SAG............................................................. 59 Sanitary Fittings........................................... 28 SAN-S.......................................................... 35 SBF300........................................................ 36 SBFB........................................................... 14 SBFW.......................................................... 14 SBP............................................................. 22 SC300.......................................................... 36 SCB............................................................. 15 SCBV........................................................... 18 SCBV-FS..................................................... 20 SCW............................................................ 15 SCWV.......................................................... 18 SCWV-FS.................................................... 20 SFR-S.......................................................... 34 SFS.............................................................. 58 SG............................................................... 59 SIL300......................................................... 36 Silicone Hose.......................................... 4, 23 Specialty Hose.............................................. 4 Spring Guard............................................... 59 ST300.......................................................... 36 ST301.......................................................... 36 STB.............................................................. 13 STW............................................................. 13 SWPV.......................................................... 23 True-Bore Hose....................................... 2, 13 TUBE-S....................................................... 34 TECHNICAL HELP Fitting Collars.....................................36 Fitting End Connections.....................66 Fitting Insertion Values ......................42 Fitting Selection Chart........................10 Fitting-Sanitary Dimension Chart ������28 Hose Assembly Guide............................. How To Use Crimpsource............67 91 Series Crimp Assembly...........68 PAGE Series Crimp Assembly �����71 90 Series FA Assembly.................73 Hose Braiding Guide.........................60 Hose Construction..............................9 Hose Diameter/Flow Rate.................65 Hose - Measuring Length..................61 Hose - Measuring NAHAD Assy. ������62 Hose - Measuring SAE Assy.............63 Hose Working Pressures.....................8 Material Properties............................64 Offer of Sale......................................80 Part Numbering - Nomenclature ���������� Silicone PN System .......................7 S30/S40 PN System.......................6 True-Bore PN System.....................5 PAGE Fittings ..............................27 Parflex Fittings .............................44 Safety Guide......................................76 Visual Index - Hose...........................12 Visual Index - Fittings............................ Series 90 ......................................52 Series 91N/91 ..............................43 Series 94/95 ................................51 PAGE Fittings ..............................30 i Catalog 5162F NOTES ii Parflex is a leading manufacturer of Flexible Fluoroplastic Hose products. As an innovator in the design and production of seamless convoluted hoses and special application assemblies, the PAGE product line supplies customers around the world. Our experience extends into such diverse markets as chemical manufacturing, pharmaceutical processing, food handling and semiconductor production. From our manufacturing and fabrication facility in Fort Worth, Texas, we offer fluid transport solutions worldwide. WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice. Offer of Sale The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated in the “Offer of Sale”. ©Copyright 2014, Parker Hannifin Corporation. All rights reserved. Aerospace Key Markets Aftermarket services Commercial transports Engines General & business aviation Helicopters Launch vehicles Military aircraft Missiles Power generation Regional transports Unmanned aerial vehicles Key Products Control systems & actuation products Engine systems & components Fluid conveyance systems & components Fluid metering, delivery & atomization devices Fuel systems & components Fuel tank inerting systems Hydraulic systems & components Thermal management Wheels & brakes Automation Key Markets Alternative energy Conveyor & material handling Factory automation Food & beverage Life sciences & medical Machine tools Packaging machinery Paper machinery Plastics machinery Primary metals Safety & security Semiconductor & electronics Transportation & automotive Key Products AC/DC drives & systems Air preparation Electric actuators, gantry robots & slides Human machine interfaces Inverters Manifolds Miniature fluidics Pneumatic actuators & grippers Pneumatic valves & controls Rotary actuators Stepper motors, servo motors, drives & controls Structural extrusions Vacuum generators, cups & sensors Fluid Connectors Key Markets Aerial lift Agriculture Bulk chemical handling Construction machinery Food & beverage Fuel & gas delivery Industrial machinery Life sciences Marine Mining Mobile Oil & gas Renewable energy Transportation Key Products Check valves Connectors for low pressure fluid conveyance Deep sea umbilicals Diagnostic equipment Hose couplings Industrial hose Mooring systems & power cables PTFE hose & tubing Quick couplings Rubber & thermoplastic hose Tube fittings & adapters Tubing & plastic fittings Hydraulics Key Markets Aerial lift Agriculture Alternative energy Construction machinery Forestry Industrial machinery Machine tools Marine Material handling Mining Oil & gas Power generation Refuse vehicles Renewable energy Truck hydraulics Turf equipment Key Products Accumulators Cartridge valves Electrohydraulic actuators Human machine interfaces Hybrid drives Hydraulic cylinders Hydraulic motors & pumps Hydraulic systems Hydraulic valves & controls Hydrostatic steering Integrated hydraulic circuits Power take-offs Power units Rotary actuators Sensors Instrumentation Key Markets Alternative fuels Biopharmaceuticals Chemical & refining Food & beverage Marine & shipbuilding Medical & dental Microelectronics Nuclear Power Offshore oil exploration Oil & gas Pharmaceuticals Power generation Pulp & paper Steel Water/wastewater Key Products Analytical Instruments Analytical sample conditioning products & systems Chemical injection fittings & valves Fluoropolymer chemical delivery fittings, valves & pumps High purity gas delivery fittings, valves, regulators & digital flow controllers Industrial mass flow meters/ controllers Permanent no-weld tube fittings Precision industrial regulators & flow controllers Process control double block & bleeds Process control fittings, valves, regulators & manifold valves Seal Key Markets Aerospace Chemical processing Consumer Fluid power General industrial Information technology Life sciences Microelectronics Military Oil & gas Power generation Renewable energy Telecommunications Transportation Key Products Dynamic seals Elastomeric o-rings Electro-medical instrument design & assembly EMI shielding Extruded & precision-cut, fabricated elastomeric seals High temperature metal seals Homogeneous & inserted elastomeric shapes Medical device fabrication & assembly Metal & plastic retained composite seals Shielded optical windows Silicone tubing & extrusions Thermal management Vibration dampening Parker’s Motion & Control Product Groups At Parker, we’re guided by a relentless drive to help our customers become more productive and achieve higher levels of profitability by engineering the best systems for their requirements. It means looking at customer applications from many angles to find new ways to create value. Whatever the motion and control technology need, Parker has the experience, breadth of product and global reach to consistently deliver. No company knows more about motion and control technology than Parker. For further info call 1 800 C-Parker (1 800 272 7537). Climate & Industrial Controls Key Markets Agriculture Air conditioning Construction Machinery Food & beverage Industrial machinery Life sciences Oil & gas Precision cooling Process Refrigeration Transportation Key Products Accumulators Advanced actuators CO2 controls Electronic controllers Filter driers Hand shut-off valves Heat exchangers Hose & fittings Pressure regulating valves Refrigerant distributors Safety relief valves Smart pumps Solenoid valves Thermostatic expansion valves Filtration Key Markets Aerospace Food & beverage Industrial plant & equipment Life sciences Marine Mobile equipment Oil & gas Power generation & renewable energy Process Transportation Water Purification Key Products Analytical gas generators Compressed air filters & dryers Engine air, coolant, fuel & oil filtration systems Fluid condition monitoring systems Hydraulic & lubrication filters Hydrogen, nitrogen & zero air generators Instrumentation filters Membrane & fiber filters Microfiltration Sterile air filtration Water desalination & purification filters & systems Parker Hannifin Corporation Parflex Division/PAGE Product Line 4700 Lone Star Blvd. Fort Worth, TX 76106 phone 817.624.1329 800.847.7280 fax 817.625.1901 888.293.2667 email: pagequote@parker.com Your complete source for quality tube fittings, hose & hose fittings, brass & composite fittings, quickdisconnect couplings, valves and assembly tools, locally available from a worldwide network of authorized distributors. Fittings: Available in inch and metric sizes covering SAE, BSP, DIN, GAZ, JIS and ISO thread configurations, manufactured from steel, stainless steel, brass, aluminum, nylon and thermoplastic. Hose, Tubing and Bundles: Available in a wide variety of sizes and materials including rubber, wire-reinforced, thermoplastic, hybrid and custom compounds. Worldwide Availability: Parker operates Fluid Connectors manufacturing locations and sales offices throughout North America, South America, Europe and Asia-Pacific. For information, call toll free... 1-800-C-PARKER (1-800-272-7537) Parker Fluid Connectors Group North American Divisions & Distribution Service Centers North American Divisions Fluid System Connectors Division Otsego, MI phone 269 694 9411 fax 269 694 4614 Hose Products Division Wickliffe, OH phone 440 943 5700 fax 440 943 3129 Industrial Hose Division Wickliffe, OH phone 440 833 2120 fax 440 833 2230 Parflex Division Ravenna, OH phone 330 296 2871 fax 330 296 8433 Quick Coupling Division Minneapolis, MN phone 763 544 7781 fax 763 544 3418 Tube Fittings Division Columbus, OH phone 614 279 7070 fax 614 279 7685 Distribution Service Centers Buena Park, CA phone 714 522 8840 fax 714 994 1183 Conyers, GA phone 770 929 0330 fax 770 929 0230 Louisville, KY phone 502 937 1322 fax 502 937 4180 Portland, OR phone 503 283 1020 fax 503 283 2201 Toledo, OH phone 419 878 7000 fax 419 878 7001 fax 419 878 7420 (FCG Kit Operations) Canada Grimsby, ONT phone 905 945 2274 fax 905 945 3945 (Contact Grimsby for other Service Center locations.) © 2014 Parker Hannifin Corporation - All Rights Reserved CAT 5162 GL 09/14