Industrial Profile SystemsIntroductionCatalog 1816-3/US 1Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAIndexExtrusion Profiles• Basic Profiles• Specialty Profiles• Profile End Caps • T-Slot and Profile Covers• Conduit Profiles • Conduit End CapsFasteners• Fasteners• T-Nuts• Miter Connectors• Screws, Bolts, Nuts & Washers• T-Clips & Cable Holders• Brackets• Gussets• Corner Elements• Joining Plates• Handles• Door Catches• Latches & Locks• Hinges• Pivot Joint• Panels & Wire Mesh• Panel Mounting/Mesh Retainers• Door Guides & Rollers• Rail Carts• Feet• Casters• Base/Corner Mounting PlatesBrackets, Gussets & PlatesHandles & HingesPanels & DoorsFeet & CastersSpecial ApplicationsLinear ApplicationsServices, Tips & ToolsIndex / Offer of Sale• Pneumatic Components• Workstation Accessories• Slide Blocks• Rail & Roller Systems• Slide Bushing Systems• Bearing Unit & Conveyor Profiles• Machining Services• Assembly Tips• Tools• Part Number Index• Catalog Index by Topic• Offer of Sale Profiles & End Caps FastenersIndex Brackets, Gussets & Plates Panels & Doors Feet & Casters Special Linear Services, Tips & Tools Handles& Hinges 2Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsIntroductionCatalog 1816-3/US 3 Contents Section 1 – Profiles 40 SeriesPages 17-3130 SeriesPages 32-3528 SeriesPage 36-4020 SeriesPage 41-43 1.5″ SeriesPage 44-501″ SeriesPage 51-5232×18 Frame ProfilePage 54Door Guide ProfilesPage 55-56Panel ProfilesPage 57 Section 2 – Fasteners BA FastenersPages 75-80Miter ConnectorsPage 81T-NutsPages 82-87T-Slot BarsPage 85 Clamp ProfilesPage 58End CapsPages 63-65UHMW ProfilesPage 60Gaskets, Profile CoversPages 60-62Conduit ProfilesPages 67-72 Rack Angle ProfilesPage 59Anodize BreakerPage 88 T-Clips/Cable HoldersPage 95-96 Bolts, Nuts, WashersPages 88-89 ScrewsPages 90-94 Clip & High Cycle NutsPage 94 2 Industrial Profile SystemsIntroductionCatalog 1816-3/US 3Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAContents Section 3 – Brackets, Gussets & Plates Corner BracketsPage 98Corner ConnectorsPage 99Profile ConnectorsPage 100Mounting PlatePage 101Clamp BlockPage 101 Joining PlatesPages 102-103Angle BracketsPages 104-105GussetsPages 106-107Corner ElementsPages 108-109 Section 4 – Panels & Doors Panels & Wire MeshPages 112-114Panel Mounting BlocksPages 115-118Mesh RetainersPages 119-120 Sliding DoorsPages 123-124 RollersPage 126-127 Rail CartsPage 128 Bifold Door GlidePages 121-122 Door Guide SystemPage 125 Roller CartsPage 128 1.50″1.50″1.00″Ø0.27″0.50″0.236″C’sink for5/16″ FHCS 4Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsIntroductionCatalog 1816-3/US 5 Contents Section 5 – Handles, Hinges & Safety Switches HandlesPages 130-132Tube Handle SupportsPage 133HingesPages 134-144Pivot JointsPage 145Quarter Turn LatchesPages 146-148 Door CatchesPages 150-152Deadbolt Page 149Door StopsPage 153 Section 6 – Feet & Casters Leveling FeetPages 156-158Knuckle FeetPages 159-160Foot AccessoriesPage 161L-Base Leveler/AnchorPage 162 Corner Mounting PlatePage 161CastersPages 166-169Floor LockPage 169 Flange FeetPage 165 Floor BracketsPages 163-164 Base PlatesPages 170-172 Slam Latch Page 149 Ball PlungersPage 152 4 Industrial Profile SystemsIntroductionCatalog 1816-3/US 5Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAContents Linear Roller SystemsPages 205-221 Section 9 – Services, Assembly Tips & ToolsSection 10 – Index and Offer of SaleSection 7 – Special Applications Pneumatic PlatesPages 176-178Pneumatic FastenersPage 178Pneumatic SealsPage 179WorkstationsPages 180-183 Lift SystemsPages 184-185Tool RunnersPage 183Section 8 – Linear Applications Slide BlocksPages 188-199Roller TrackPage 203 Block AccessoriesPages 200-202 System ComponentsPages 222-230 6Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsIntroductionCatalog 1816-3/US 7 Catalog InformationEach product page in the catalog includes:• application information and examples• technical information • dimensions• how to assemble• recommended fasteners, if applicable• ordering information (part #, unit and weight)Profile CompatibilityAs a quick reference for product compatibility, the Ordering Information section groups product by profile series. Additional information can be found in the applications drawings associated. Where available, the Recommended Hardware section will highlight the necessary hardware components based on the profile series application. Contact your Parker IPS Service Center or Customer Service to discuss specials or applications not found in this catalog.Product Information Industrial Profile SystemsHandles & Hinges Catalog 1816-3/US 153Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Handles & HingesDoor Stops23-12423-12523-158* 25.4 Ø7 51 51 6.5 13 11 A B B C D FE 19 3.3 38 ForM5 FHCS 51 Technical DataAluminum, Clear Anodized with Velcro® PadOrdering InformationDescription Unit Weight Part #Door Stop – Straight Each 91 g 23-124Door Stop 40, 30 – Angle Each 91 g 23-125Velcro® Plate Each 9 g 23-158ApplicationDoor Stops provide a positive stop to keep the door lined up with a frame. An optional Velcro® plate can be added to create a light-duty catch.Recommended Fastening Hardware (Order Separately) Profile SeriesFastener Part #23-124Part # 23-125Part # 23-15840, 30Screws24-120-624-220-624-212-5T-Nuts20-05620-05620-05228Screws24-120-624-210-524-210-5T-Nuts20-05520-03820-0381.5″Screws25-114-425-210-425-208-2T-Nuts25-001 or 20-08325-001 or 20-08325-009 or 20-0881″Screws25-112-425-206-225-206-2T-Nuts25-031 or 25-03425-030 or 25-03525-030 or 25-035 Min 40Series-5.5mm28Series-4mm 40Series OptionalVelcroPlate®[23-158] DoorStop-Straight[23-124] 28Series DoorStop28-Angle[23-126] OptionalVelcroPlate®[23-158] Part # A B C D E F23-125 51 44.5 25.4 30 4.75 M5 Door Stops* For wider surfaces, use 22-145 and apply velcro strip. Order M6 hardware separately. How to Assemble Recommended Fastening Hardware Ordering Information Application Information Technical Data 3D ViewDimensionsPart # 6 Industrial Profile SystemsIntroductionCatalog 1816-3/US 7Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAOrdering Information• Bundles – IPS product line can be ordered as bundles of profiles and packages of fasteners and accessories to machine and assemble at your location.• UPS Shipping Requirements – IPS profiles can be shipped via UPS Air if they are cut to 8′ (2.4m) length max and each package does not exceed 70 lbs (31kg). Cut charges will apply.• Kits – IPS product line can be ordered in a kit form where the profiles are cut and machined to order and fasteners and accessories are included based on a parts list. This kit can be assembled at your location.• Complete Assembly – IPS product line can be ordered completely assembled and shipped as an assembled unit. Shipping costs should be a consideration when using this method. • Order cut to size – specify the length in millimeters or decimal meter dimensions. Example: 1500mm or 1.5meters. See the conversion chart for fraction to decimal conversions. A cut charge will be included with cut to size lengths.• Additional machining should also be specified along with the profile if it is required for fasteners or accessories. Standard machining options include tapping, drilling, and counter boring. See machining services pages in this catalog for correct part numbers. Any additional custom machining can be done by our expert machinists to ensure that your design is complete and to your requirements.• Cut to length tolerance is ± .40mm [± .015″].Parker offers several ways to order metric and Inch product so that you can choose a level of service to suit your needs. You can order everything from a bundle of uncut profiles to a completely assembled structure.Ordering ChoicesMachining Services 8Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsIntroductionCatalog 1816-3/US 9 Profile Accessories What aspect is critical for fastening?• Aesthetics/hidden (standard fastener, universal)• Strength (universal fastener, standard)• Ease-of-assembly/no machining (joining plate, gussets)• Adjustability (gussets, angle bracket, universal)When ordering universal fasteners or standard fasteners, machining operations are required for the fastener to work in a profile. Part numbers and descriptions for machining operations are found in the machining services section of the catalog.Choices of Accessories A full range of accessories are available to complete an assembly:• T-slot Covers• End Caps• Brackets and Gussets• Joining and Base Plates• Casters• Hinges• HandlesWhat aspect is critical for accessories?Parker offers a wide range of accessories to provide the right part for the special considerations of your application.• Aesthetics• Ease-of-assembly• Load on structure• Functionality BA Panels and wire mesh can be ordered as a full sheet or cut to a specified dimension in square meters. When ordering full sheets, please add a P to the end of the part number that you are ordering (e.g. 26-790-6P) Standard panel choices include:• Lexan®• TRESPA®• Expanded PVC• PVC coated wire mesh• Aluminum Composite Specialty panels of any material can be ordered for any project. Additional time may be required to expedite any specials.Choosing a Fastener/AccessoryPanels & Wire Mesh 8 Industrial Profile SystemsIntroductionCatalog 1816-3/US 9Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USATechnical Data Rest PointRest Point All 40, 30, 28, 20, 1.5″ and 1″ series profiles have a taper built-in to the T-slot. Preload in the material elastic range results in a vibration safe connection because the profile is pulled flush with the connecting surface during fastener tightening. The high quality material ensures that the profile T-slot will remember it’s original shape if disassembly is required, making all IPS profiles completely reusable. Defined Rest Points• All structural IPS profiles are prime aluminum, mill-certified with metallurgical properties of 6105-T5 or 6005-T5. Accessory products are 6061-T6 or 6063-T6.• Yield (0.2 limit) Rm min. 240 N/mm2 (35,000 psi)• Tensile strength Rm min. 260 N/mm2 (38,000 psi) Note: Cross sectional thickness variations of the profiles may influence yield and tensile strength.• Elongation for 2 in. long specimens: 6005-T5 (thickness up thru 0.124 in), 6061-T6 (up thru 0.249 in), 6105-T5 (up thru 0.5 in) – 8% min 6005-T5 (thickness 0.125-1 in.), 6061-T6 (0.25 in. and over) – 10% min• Elasticity E approximately 70,000 N/mm2 (10,150 kpsi)• Brinell Hardness approximately 75 HB 2.5/187.5• The molecular structure of the 6005-T5 alloy is generally stable in an ambient temperature range of: -40°C to +200°C (-40°F to +392°F) Extreme temperature fluctuations may change the mechanical properties.Profile Finish• Clear anodizing: AA M10, C22, A31, Clear• Black anodizing: AA M10, C22, A34, Black • Minimum depth: 0.010mm (0.0004 in.)• Surface hardness: approximately 250 HV, outer surface exposed• Custom anodizing and protective finishes available• Extrusions conforming to DIN 17 615 specifications and to IPS blueprints.• Twist per 300mm (1 ft) length not to exceed 0.25° and total twist over 6m (20 ft) length not to exceed 1.5°.• Flatness 0.10mm (0.004 in) per 25mm (1 in) of width.• Straightness 0.32mm (0.0125 in) per 300mm (1 ft) of length and not exceeding 3mm (0.12 in) over 6m (20 ft) of extrusion. Maximum bow 3mm (0.12 in) over 6m (20 ft).• Cut to length tolerance ± .40mm [± .015″]TolerancesMechanical Properties Profile Series Preload Range 40, 30, 28 0.2mm 20 0.1mm 1.5″, 1″ 0.008″ (0.2mm) 10Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsIntroductionCatalog 1816-3/US 11 Engineering DataFormulas for calculating deflection at critical points X Axis Y Axis Deflection Calculation ApplicationStand-alone program able to calculate deflection and stress of IPS aluminum profiles based on profile selection, length and load (evenly distributed and/or concentrated at the critical point). Three cases for the profile attachment are calculated: supported at both ends, fixed at one end, fixed at both ends. Metric or English units of measure can be used to enter profile length and load. Calculated deflection given in both millimeters and inches. Stress values are given in both N/mm2 and psi.System requirements: Windows 9x, Windows NT 3.0 or higher, 133MHz, 16MB RAM.In the formulas:ƒ = deflection in mmF = load in NL = free profile length in mmE = Modulus of Elasticity in N/mm2 EAl= 70,000 N/mm2I= Moment of inertia in cm4ExampleFind the deflection for the following conditions: 80×40 Standard Profile (10-080), upright IX = 71.97 cm4 m = 3.18 kg/m L = 1000 mm F = 50 N – concentrated load No additional load other than profile weightCalculate Profile weight (uniform load) FU = m * L * g = (3.18 * 10-3) * 1000 * 9.81 = 31.2 NTotal deflection ƒTOTAL= ƒCONCENTRATED + ƒUNIFORMSupported at both ends: ƒ = 0.021 + 0.008 ≈ 0.03mmFixed at one end: ƒ = 0.331 + 0.077 ≈ 0.041mmFixed at both ends: ƒ = 0.005 + 0.002 ≈ 0.01 mmSupported at both endsFixed at one endFixed at both ends FFFƒ = F * L3 48 E * I * 104 ƒ = F * L3 3 E * I * 104 ƒ = F * L3 192 E * I * 104 Total Load FTotal Load FTotal Load Fƒ = F * L3 8 E * I * 104 ƒ = F * L3 384 E * I * 104 ƒ = 5 * F * L3 384 E * I * 104 10 Industrial Profile SystemsIntroductionCatalog 1816-3/US 11Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAConversion ChartsFractions to DecimalsMetric/English ConversionsBelow is a conversion chart for converting metric and English units of measure for applicable physical conditions with this product line. Multiply by To Get Linear mm 0.03937 Inches Inches 25.4 mm cm 0.3937 Inches m (meter) 3.2808 Feet Feet 0.3048 m (meters) Area mm2 0.00155 Inches2 Inches2 645.16 mm2 cm3 0.06102 inches3 Volume inches3 16.387 cm3 inches3 0.0165 liters Liters 61.024 inches3 Mass Gram (g) 0.0353 Ounce (oz) Ounce (oz) 28.329 Gram (g) Kilogram (kg) 2.2046 Pounds (lb) Pounds 0.4536 Kilograms (kg) Velocity Meters/Minute 3.281 Feet/Minute Feet/Minute 0.3048 Meters/Minute Kilograms-f (kgf) 9.807 Newtons (N) Force Newtons (N) 0.10194 Kilograms-f (kgf) Pounds-f (lbf) 4.448 Newtons (N) Newtons (N) 0.2248 Pounds-f (lbf) Pressure Bar 14.5 PSI PSI 0.069 Bar Torque Newton-Meters (Nm) 8.851 Pound-Inches (lb-in) Pound-Inches 0.11298 Newton-Meters (Nm) Moment of Inertia cm4 0.02403 inch4 inch4 41.623 cm4 Fraction Decimal 1/16 0.063 1/8 0.125 3/16 0.188 1/4 0.25 5/16 0.313 3/8 0.375 7/16 0.438 1/2 0.50 9/16 0.563 5/8 0.625 11/16 0.688 3/4 0.75 13/16 0.813 7/8 0.875 15/16 0.938 12Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsIntroductionCatalog 1816-3/US 13 General Information WARNING – USER RESPONSIBILITYFAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH,PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigationby users having technical expertise.The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors.To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems.OFFER OF SALEThe items described in this document are hereby offered for sale by Parker-Hannifin Corporation, its subsidiaries or its authorized distributor. This offer and its accepteanceare governed by the provisions stated in the detailed “Offer of Sale” elsewhere in this document.© Copyright 2011, Parker Hannifin Corporation. All Rights Reserved. 12 Industrial Profile SystemsProfilesCatalog 1816-3/US 13Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA 40 Series 17-3130 Series 32-35 28 Series 36-4020 Series 41-431.5″ Series 44-501″ Series 51-52End Caps 63-65 BA ContentsSection 1Basic & Specialty ProfilesBasic Profiles Specialty Profiles 32×18 Frame Profile 54Door Profiles Rolling Door Guide 55 Sliding Door Guide 56Panel Profiles Stiffener/Handle 57 Panel Mounting 57 Clamp Profiles Mesh Clamp 58 Clamp Bar 58Rack Angle 59UHMW Profiles 60Profile Covers 60Panel/Mesh Gaskets 61Cover Strips 62Conduit Profiles 67-71Conduit End Caps 72 14Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsProfilesCatalog 1816-3/US 15 20 Series28 Series30 Series40 Series10-54010-04011-04010-34010-14010-24010-04311-54010-44010-01610-045*10-08110-083*10-085*10-086*10-089*10-68010-08010-18011-08014-24811-10012-02812-12812-22812-42812-62812-32812-04412-05612-72812-12012-02012-12412-04010-044Overview*Available in 3m bar only.12-03412-06012-03012-03310-380 14 Industrial Profile SystemsProfilesCatalog 1816-3/US 15Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA 40 Series10-08811-08811-08910-153010-12010-16411-14011-153010-303011-084*10-16111-128Overview*Available in 3m bar only.1″ Series1.5″ Series10-16011-16011-12212-101012-102012-202011-303010-156010-151511-151510-159110-159210-159310-159410-154312-151512-1530 16Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsProfilesCatalog 1816-3/US 17 12-10612-10712-108†12-117-x12-103†Roller SystemsConduit**DoorT-Slot CoversSlidesPanel12-022*12-42112-012*12-014*12-013*12-015*12-011*12-010*12-105*12-109*12-110*12-42012-43012-41013-50513-51313-52413-10613-11413-12515-040**15-160**15-120**15-041**15-161**15-122**15-042**15-082**Overview†Available in 2m bar only.*Available in 3m bar only.**Available in 4m bar only.12-101†12-102†12-115†12-11412-111†12-116†12-40012-016†Specialty Profiles12-03211-05610-03615-080**12-113† 16 Industrial Profile SystemsProfilesCatalog 1816-3/US 17Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA40 Series Profiles Moment of Inertia Section Modulus IX IY WX WY Section Weight Cat.Part # Description [cm4] [cm4] [cm3] [cm3] [cm2] [kg/m] Page10-016 Profile 16×40 1.10 7.19 1.29 3.60 4.38 1.17 2410-036 Profile Post 36×36 8.55 8.55 4.32 4.32 7.18 1.94 3110-040 Profile 40×40 Standard 9.46 9.46 4.73 4.73 6.65 1.72 1910-043 Profile 40×40 Quarter Round ST 6.95 6.95 3.15 3.15 5.87 1.59 2110-044 Profile 40×40-45° Standard 6.79 6.79 3.03 3.03 5.72 1.53 2210-045 Profile 40×45° Standard 16.25 34.51 7.40 12.20 10.22 2.76 2210-080 Profile 80×40 Standard 17.23 71.56 8.62 17.89 11.49 3.18 2610-081 Profile 16×80 2.22 50.72 2.61 12.68 8.41 2.20 2410-083 Profile R40x80 30° Standard 8.48 5.87 4.01 3.64 5.71 1.57 2310-085 Profile R40x80 45° Standard 10.69 16.64 4.75 8.23 6.99 1.92 2310-086 Profile R40x80 60° Standard 13.02 35.75 6.30 10.38 8.26 2.25 2310-088 Profile 80×80 Standard 136.85 136.85 34.21 34.21 19.98 5.45 2710-089 Profile R40x80 90° Standard 21.68 110.54 8.73 20.89 12.67 3.44 2310-120 Profile 120×40 Standard 25.04 225.56 12.52 37.59 16.66 4.35 2810-140 Profile 40×40 Bi-Slot Corner 9.29 9.29 4.64 4.64 6.67 1.81 2010-160 Profile 160×80 Standard 268.68 738.22 67.17 92.28 37.76 10.29 2910-161 Profile 16×160 3.73 289.10 4.13 36.14 12.98 3.45 2410-164 Profile 160×40 Standard 32.84 368.96 16.42 46.12 21.23 5.80 2810-180 Profile 80×40 Tri-Slot Corner 16.61 68.92 8.14 17.15 11.16 2.83 2610-240 Profile 40×40 Bi-Slot Mid-Frame 9.57 9.13 4.79 4.57 6.73 1.82 2010-340 Profile 40×40 Tri-Slot 9.94 9.33 4.01 4.66 6.83 1.82 2010-380 Profile 80×40 Quad-Slot 16.77 69.20 8.21 17.30 11.28 3.06 2610-440 Profile 40×40 Mono-Slot 8.47 8.71 4.08 4.35 5.81 1.56 2010-540 Profile 40×40 Light 8.27 8.27 4.14 4.14 5.20 1.41 1910-680 Profile 80×40 Light 15.30 56.78 7.65 14.70 9.10 2.46 2611-040 Profile 40×40 Heavy 14.26 14.26 7.13 7.13 9.29 2.53 1911-056 Profile Post 56×56 46.09 46.09 14.98 14.98 13.17 3.53 3111-080 Profile 80×40 Heavy 26.97 102.65 13.48 25.66 16.74 4.58 2611-084 Profile 80x80x40 Corner Heavy 127.47 128.57 27.62 27.66 23.23 6.27 3011-088 Profile 80×80 Heavy 186.37 186.37 46.59 46.59 26.23 7.02 2711-089 Profile 80×80 Extra Heavy 223.90 223.90 55.97 55.97 37.39 9.83 2711-100 Profile 40×100 Heavy 31.22 193.34 15.61 38.67 18.02 4.94 2511-122 Profile 120×80 Heavy 274.14 738.22 68.53 119.29 39.79 10.82 2711-128 Profile 28×160 20.62 737.99 14.73 92.25 31.27 8.46 2511-140 Profile 160×40 Heavy 53.10 738.07 26.55 92.26 32.17 8.72 2811-160 Profile 160×80 Heavy 343.37 1106.92 85.84 138.37 48.23 13.07 2911-540 Profile 40×40 Heavy Square 15.78 15.78 7.89 7.89 7.98 2.16 31 40 Series 18Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsProfilesCatalog 1816-3/US 19 T-Slot DetailServiceLightStandardHeavy Ø6.82184.512.3Ø6.82084.512.3 2084.512.3Ø6.8 End of profile tapped[19-010] to receiveM8 screw ofstandard fastener.Standard Fastener [20-002]comprised of parts:[20-002Z1][24-118-8]7mm access hole drilled [19-011]through extrusion for access tostandard fastener by M5 Allen wrench Counterbore [19-015] 20mm dia.by 11mm deep hole for universal fastenerUniversal Fastener Set [20-004]comprised of the following parts:M8T-Nut [20-058]Universal Fastener [20-004z1]Socket Head Cap Screw [24-330-8] Socket Head Cap Screw [24-345-8] Butt Fastener [20-006]Counterbore [19-015]20mm dia.deep hole for univ ersal. by 11mm40 Series Ø6.82184.512.3Ø6.82084.512.32084.512.3Ø6.8 Ø6.82184.512.3 Ø6.82084.512.32084.512.3Ø6.8 18 Industrial Profile SystemsProfilesCatalog 1816-3/US 19Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA40x40 Slotted Profiles ApplicationWith T-slots located on all four faces this profile provides extensive mounting options for connections and accessories directly onto a structure, making this an excellent choice for general purpose applications such as workstations, machine guarding and enclosures. These profiles are weight optimized and available in light, standard and heavy ratings.Technical DataAluminum, Clear or Black Anodized (See Technical Data page 9 for full material and finish specifications)Part # IX IY WX WY Section Weight [cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]10-540 8.27 8.27 4.14 4.14 5.20 1.4110-040 9.46 9.46 4.73 4.73 6.65 1.7211-040 14.26 14.26 7.13 7.13 9.29 2.53Ordering InformationDescription Unit Part # (Clear) Part # (Black)Profile 40×40 Light Cut off max. 6m 10-540 10-540B Profile 40×40 Standard Cut off max. 6m 10-040 10-040BProfile 40×40 Heavy Cut off max. 6m 11-040 *Saw Cut Needed for Cut to Length 19-001 19-001Quick Reference for Mating ComponentsFasteners Structural Accessories Standard Fastener (Single) 20-144 Levelers Page 156 Standard Fastener 20-002 Casters Page 167 Universal Fastener 20-004 Plates Page 102End Caps Gussets Page 104 40×40 18-813 Fasteners Page 73 40×40 Secure 18-913 Machining & Processing Page 231 10-54010-04011-040 40 40 40 40 ServicingforUniversaUniversal FastenerServicingForStandardFastener(End)ServicingForStandardFastener(Side)Ø0.281DRILLTHRU0.75″FROMENDTAP5/16-18XØ0.813″X0.625″DEEP0.813″FROMEND0.625″DEEP 40 Series 40 40 20Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsProfilesCatalog 1816-3/US 21 ApplicationThese profiles are similar to 40X40 Standard profiles except closed faces are positioned in various arrangements. This provides efficient fastening in a variety of configurations while retaining a smooth surface for applications requiring an aesthetically clean look. They are particularly useful in clean room, packaging, medical and pharmaceutical applications as they reduce areas where contaminants and dirt could potentially accumulate.Technical DataAluminum, Clear Anodized (See Technical Data page 9 for full material and finish specifications)Part # IX IY WX WY Section Weight [cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]10-140 9.29 9.29 4.64 4.64 6.67 1.8110-240 9.57 9.13 4.79 4.57 6.73 1.8210-340 9.94 9.33 4.01 4.66 6.83 1.8210-440 8.47 8.71 4.08 4.35 5.81 1.56Ordering InformationDescription Unit Part # (Clear) Profile 40×40 Bi-Slot Corner Cut off max. 6m 10-140 Profile 40×40 Bi-Slot Mid-Frame Cut off max. 6m 10-240 Profile 40×40 Tri-Slot Cut off max. 6m 10-340 Profile 40×40 Mono-Slot Cut off max. 6m 10-440 *Saw Cut Needed for Cut to Length 19-001 Quick Reference for Mating ComponentsFasteners T-Nuts Standard Fastener (Single) 20-144 M5 Roll-In 20-052Universal Fastener 20-004 M6 Roll-In 20-056Flat Plate Fast. 20-028 M8 Roll-In 20-058End Caps M8/40 Double Roll-In 20-050 40×40 18-813 M6 Economy Standard 20-080 40×40 Secure 18-913 M8 Economy Standard 20-08140×40 Closed Face Profiles10-14010-24010-34010-440 4040 40 40 40 40 40 40 Universal Fastening Set 20-004 on 40 x 40 bi-slot corner profile.40 Series Corner Bracket and Square Connector Cap used with 40 x 40 bi-slot corner profile. 20 Industrial Profile SystemsProfilesCatalog 1816-3/US 21Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA 4040 ApplicationThis profile is designed with a radius quarter round face and T-Slots on the remaining perpendicular sides. This is particularly useful for engineering frames, workstation edges, shelving or enclosures where a rounded edge is aesthetically or functionally desirable. Technical DataAluminum, Clear Anodized (See Technical Data page 9 for full material and finish specifications)Part # IX IY WX WY Section Weight [cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]10-043 6.95 6.95 3.15 3.15 5.87 1.59Ordering InformationDescription Unit Part # (Clear) Profile 40×40 Quarter Round Cut off max. 6m 10-043 *Saw Cut Needed for Cut to Length 19-001 Quick Reference for Mating ComponentsFasteners Radius Profile Accessories Flat Plate Fastener 20-028 Connector Cap, Radius 18-821 90o Miter Connector 20-128Z1 Tap profile end for M8 19-010 40 Series Miter Connector 20-022 45o Miter Cut 19-105End Cap Special Miter Cut 19-104 40×40 Quarter Round 18-843 10-04340×40 Quarter Round Profile 40QuarterRound[10-043] M8BHCS RadiusCap40[18-821] CornerBracket40[22-146] 90° Miter Connector[20-022]Ø6 45.5 40 Series 22Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsProfilesCatalog 1816-3/US 23 ApplicationWith angled faces and perpendicular T-Slots, profile 10-044 is ideal for smoothing corners of structures for clean room, medical, pharmaceutical as well as display and workstation applications. This can also be used as gussets or for placing profiles at a 45o angle within a structure. Profile 10-045 provides T-Slots on three sides: one parallel with the closed face, and two positioned to provide a 45° angle. This profile can be used when creating polygonal shaped structures.Technical DataAluminum, Clear Anodized (See Technical Data page 9 for full material and finish specifications)Part # IX IY WX WY Section Weight [cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]10-044 6.79 6.79 3.03 3.03 5.72 1.5310-045 16.25 34.51 7.40 12.20 10.22 2.76Ordering InformationDescription Unit Part # (Clear) Profile 40×40-45o Standard Cut off max. 6m 10-044 Profile 40x45o. Standard Each, 3m** 10-045 *Saw Cut Needed for Cut to Length 19-001Quick Reference for Mating ComponentsFasteners Angle Profile Accessories Standard Fastener (Single) 20-144 Corner Bracket 40 22-146 Universal Fastener 20-004 Connector Cap, 3x45o 18-822End Caps Connector Cap, 2x45o 18-836 40×40-45o 18-820 45o Miter Cut 19-105 40-45o 18-845 Special Miter Cut 19-104 Tap profile end for M8 19-01010-045**40 Series Angled Profiles 407245° 40Series[10-140] 40x40x45°[11-044] 40×45°EndCap[18-820]Use40SeriesUniversalFasteners[24-004]ontheinsideofthisjointtocreateasmoothexterior.Bi-SlotCorner 40 40 10-04440 Series Profiles** Available in 3m bar only 22 Industrial Profile SystemsProfilesCatalog 1816-3/US 23Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA** Available in 3m bar only.10-083** 10-089**10-086**10-085**40 Series Radius Profiles 40 30° 40 45° 40 60° 40 90° ApplicationRadius surfaces on two facing sides make these profiles particularly useful for creating rounded corners. They are ideal for applications requiring an aesthetically pleasing look, or where contaminants and dirt must be kept to a minimum such as medical and pharmaceutical environments. These profiles are also useful in constructing cases, tables and angled structure bases.Technical DataAluminum, Clear Anodized (See Technical Data page 9 for full material and finish specifications)Part # IX IY WX WY Section Weight [cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]10-083 8.48 5.87 4.01 3.64 5.71 1.5710-085 10.96 16.64 4.75 8.23 6.99 1.9210-086 13.02 35.75 6.30 10.38 8.26 2.2510-089 21.68 110.54 8.73 20.89 12.67 3.44Ordering InformationDescription Unit** Part # (Clear) Profile R40x80 30° Standard Each, 3m 10-083 Profile R40x80 45°Standard Each, 3m 10-085 Profile R40x80 60° Standard Each, 3m 10-086 Profile R40x80 90° Standard Each, 3m 10-089 *Saw Cut Needed for Cut to Length 19-001 Quick Reference for Mating ComponentsFasteners Structural Accessories Universal Fastener 20-004 Machining & Processing Page 231 A-602AA 10-083 10-08660 +A – 60330° 32(A – 60)A 40 Series Profiles 24Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsProfilesCatalog 1816-3/US 25 ApplicationLight construction and support for attaching items such as valves, limit switches, pneumatics and control equipment. Profile 10-081 can be used as a base plate on Roller System 6 Bearing Units. Profile 10-161 has a large surface area with 8mm and 5mm T-Slots providing convenient attachment points for multiple accessories (this profile should not be used as a structural member).Technical DataAluminum, Clear Anodized (See Technical Data page 9 for full material and finish specifications)Part # IX IY WX WY Section Weight [cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]10-016 1.10 7.19 1.29 3.60 4.38 1.1710-081 2.22 50.72 2.61 12.68 8.41 2.2010-161 3.37 289.10 4.13 36.14 12.98 3.45Ordering InformationDescription Unit Part # (Clear)Profile 16×40 Cut off max. 6m 10-016 Profile 16×80 Cut off max. 6m 10-081 *Saw Cut Needed for Cut to Length 19-001 Profile 16×160 Cut off max. 6m 10-161 *Saw Cut Needed for Cut to Length 19-003 Quick Reference for Mating ComponentsFasteners T-Nut Examples Butt-Fastening Set M6 20-006 M5 Roll-In Single 20-052 Flat Plate Fastening Set 20-028 M8 Roll-In Double 20-050End Cap Profile 16×40 18-811 Profile 16×80 18-812 Profile 16×160 18-806 40 Series 16mm Profiles 10-01610-16110-081 4016 28 Ø4.9 1680 Ø4.1 68 16016Ø4.1 Ø5.1 40 Series Profiles 24 Industrial Profile SystemsProfilesCatalog 1816-3/US 25Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA ApplicationThese heavy profiles are ideal for general engineering structures such as machine bases, structural supports and mounting surfaces on fixturing applications. 11-128 is used as a carriage plate for bearing block assemblies on Linear System 14.Technical DataAluminum, Clear Anodized (See Technical Data page 9 for full material and finish specifications)Part # IX IY WX WY Section Weight [cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]11-100 31.22 193.34 15.61 38.67 18.02 4.9411-128 20.62 737.99 14.73 92.25 31.27 8.46Ordering InformationDescription Unit Part # (Clear) Profile 40×100 Heavy Cut off max. 6m 11-100 *Saw Cut Needed for Cut to Length 19-002 Profile 28×160 Cut off max. 6m 11-128 *Saw Cut Needed for Cut to Length 19-003 Quick Reference for Mating ComponentsEnd Cap Fasteners 160×28 18-816 Standard Fastener 20-002 Universal Fastener 20-004 T-Slot Nuts Page 82 11-100 100×40 and 160×28 Profiles11-128 10040 28 160 40 Series Profiles 26Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsProfilesCatalog 1816-3/US 27 ApplicationDesigned for applications where high strength is required. Ideal for general engineering structures such as machine frames, work stations and support structures. Profiles 10-080 and 11-080 can be used in the construction of linear slides with the IPS Roller Systems. Both profiles can also be used for compressed air piping.Technical DataAluminum, Clear or Black Anodized (See Technical Data page 9 for full material and finish specifications)Part # IX IY WX WY Section Weight [cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]10-680 15.30 58.78 7.65 14.70 9.10 2.4610-080 17.23 71.56 8.62 17.89 11.49 3.1810-180 16.61 68.92 8.14 17.15 11.16 2.8310-380 16.77 69.20 8.21 17.30 11.28 3.06 11-080 26.97 102.65 13.48 25.66 16.74 4.58Ordering InformationDescription Unit Part # (Clear) Part # (Black)Profile 80×40 Light Cut off max. 6m 10-680 Profile 80×40 Standard Cut off max. 6m 10-080 10-080B Profile 80×40 Tri-Slot Corner Cut off max. 6m 10-180Profile 80×40 Quad-Slot Cut off max. 6m 10-380Profile 80×40 Heavy Cut off max. 6m 11-080 *Saw Cut Needed for Cut to Length 19-001 Quick Reference for Mating ComponentsFasteners Structural Accessories Standard Fastener (Single) 20-144 Compressed Air Fittings Page 176 Standard Fastener 20-002 Levelers Page 156End Caps Plates Page 102 80×40 18-814 Gussets Page 104 80×40 Secured 18-914 Linear Slides Page 20610-18011-08010-68010-08080×40 Profiles 8040 40 80 80 40 40 Series Profiles 80 40 80 40 10-380 26 Industrial Profile SystemsProfilesCatalog 1816-3/US 27Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA ApplicationDesigned for heavy duty applications and construction of linear slides with IPS roller systems, these profiles are also suitable for multiple channel compressed air piping. Profile 11-089 can be used as a manifold for pressurized air (150 psi). A support bearing can be pressed into the center diameter to hold shafts or spindles for rotary applications. This diameter can also be used to house electrical or air lines.Technical DataAluminum, Clear or Black Anodized (See Technical Data page 9 for full material and finish specifications)Part # IX IY WX WY Section Weight [cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]10-088 136.85 136.85 34.21 34.21 19.98 5.4511-088 186.36 186.37 46.59 46.59 26.23 7.0211-089 223.90 223.90 55.97 53.97 37.39 9.8311-122 274.14 738.22 68.53 119.29 39.79 10.82Ordering InformationDescription Unit Part # (Clear) Part # (Black)Profile 80×80 Standard Cut off max. 6m 10-088 10-088BProfile 80×80 Heavy Cut off max. 6m 11-088 *Saw Cut Needed for Cut to Length 19-002 19-002 Profile 80×80 Extra Heavy Cut off max. 6m 11-089** Profile 80×120 Heavy Cut off max. 6m 11-122 *Saw Cut Needed for Cut to Length 19-003 Quick Reference for Mating ComponentsFasteners Structural Accessories Standard Fastener 20-002 Compressed Air Fittings Page 176 Universal Fastener 20-004 Plates Page 102End Caps Gussets Page 104 80×80 18-815 Linear Slides Page 206 80×80 Secured 18-915 80×120 18-841 80×80 and 120×80 Profiles 10-088 11-08911-088 80 80 80 80 80 80 120 80 11-122 InquireaboutCustomTops 40 Series Profiles** Requires single ear fastener 20-144 / 25-014 28Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsProfilesCatalog 1816-3/US 29 ApplicationDesigned for applications such as fixturing, vertical structural support and headers for bearing block assemblies on IPS Linear System 14. These profiles are also suitable for multiple channel compressed air piping.Technical DataAluminum, Clear Anodized (See Technical Data page 9 for full material and finish specifications)Part # IX IY WX WY Section Weight [cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]10-120 25.04 225.56 12.52 37.59 16.66 4.3510-164 32.84 368.96 16.42 46.12 21.23 5.8011-140 53.10 738.07 26.55 92.26 32.17 8.72Ordering InformationDescription Unit Part # (Clear)Profile 120×40 Standard Cut off max. 6m 10-120 Profile 160×40 Standard Cut off max. 6m 10-164 Profile 160X40 Heavy Cut off max. 6m 11-140 *Saw Cut Needed for Cut to Length 19-003 Quick Reference for Mating ComponentsFasteners T-Nut Examples Standard Fastener 20-002 M5 Roll-In Single 20-052 Universal Fastener 20-004 M8 Roll-In Double 20-050End Caps Structural Accessories 120×40 18-840 Compressed Air Fittings Page 176 160×40 18-817 Machining & Processing Page 23110-120120×40 and 160×40 Profiles11-14010-164 40 120 40160 40 160 40 Series Profiles 28 Industrial Profile SystemsProfilesCatalog 1816-3/US 29Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA 1608010-160 ApplicationDesigned for very high load or wide span applications and construction of linear slides with IPS Roller Systems. These high strength profiles are also suitable for multiple channel compressed air piping.Technical DataAluminum, Clear Anodized (See Technical Data page 9 for full material and finish specifications)Part # IX IY WX WY Section Weight [cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]10-160 268.68 738.22 67.17 92.28 37.76 10.2911-160 343.37 1106.92 85.84 138.37 48.23 13.07Ordering InformationDescription Unit Part # (Clear) Profile 160×80 Standard Cut off max. 6m 10-160 Profile 160×80 Heavy Cut off max. 6m 11-160 *Saw Cut Needed for Cut to Length 19-003 Quick Reference for Mating ComponentsFasteners Structural Accessories Standard Fastener 20-002 Levelers Page 156 Universal Fastener 20-004 Casters Page 167End Caps Plates Page 102 160×80 18-818 Gussets Page 104160×80 Profiles11-160 80 160 40 Series Profiles 30Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsProfilesCatalog 1816-3/US 31 11-084Heavy Corner Profile ApplicationDesigned for very high load or wide span applications and construction corner posts in structures or machine assemblies. This high strength profile is also suitable for multiple channel compressed air piping.Technical DataAluminum, Clear Anodized (See Technical Data page 9 for full material and finish specifications)Part # IX IY WX WY Section Weight [cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]11-084 127.47 128.57 27.62 27.66 23.23 6.27Ordering InformationDescription Unit** Part # (Clear) Profile 80x80x40 Corner Heavy Each 11-084 *Saw Cut Needed for Cut to Length 19-003 Quick Reference for Mating ComponentsFasteners T-Nut Examples Standard Fastener 20-002 M6 Roll-In 20-056 Universal Fastener 20-004 M8 Roll-In 20-058 M8/40 Double Roll-In 20-049 T-Slot Nut, HD M8 20-064 80 40 80 40 40 Series Profiles** Avaliable in 3m bar only 30 Industrial Profile SystemsProfilesCatalog 1816-3/US 31Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA 3636 20 20Ø1011-540 ApplicationThese profiles are engineered as support elements for a variety of applications including table bases, frames and machine guarding. Profile 10-036 fits into the cavity of 11-056 to create a telescoping post for work stations or tables. This cavity can also be used as a channel for counterweights. Technical DataAluminum, Clear Anodized (See Technical Data page 9 for full material and finish specifications)Part # IX IY WX WY Section Weight [cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]11-540 15.78 15.78 7.89 7.89 7.98 2.1610-036 8.55 8.55 4.32 4.32 7.18 1.9411-056 46.09 46.09 14.98 14.98 13.17 3.53Ordering InformationDescription Unit Part # (Clear) Profile 40×40 Heavy Square Cut off max. 6m 11-540 Profile Post 36×36 Cut off max. 6m 10-036 Profile Post 56×56 Cut off max. 6m 11-056 *Saw Cut Needed for Cut to Length 19-001 Quick Reference for Mating ComponentsEnd Caps Structural Accessories 40×40 (11-540 only) 18-805 Ratchet Handle 23-316 56×56 Post Profile 18-819 Flat Plate Fastener 20-028Post and Square Profiles11-05610-036 Mounting Option 1 Univ.Fast.Set 40[20-004]Mounting Option 2Std.Fast.Set 40[20-002](access hole required)T-Nut HD M8[20-064]M8 FlatWasher[24-700-8]Rachet Handle M8x16[23-316]Optional mounting withsocket head screwProfile 56×56[11-056]Profile 36×3610-036 40 40 28SQUARE 6 56 56 36SQUARE 20 20 ∅8.9 ∅6.840 Series Profiles 32Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsProfilesCatalog 1816-3/US 33 Moment of Inertia Section Modulus IX IY WX WY Section Weight Cat.Part # Description [cm4] [cm4] [cm3] [cm3] [cm2] [kg/m] Page12-030 Profile 30×30 3.15 3.15 2.10 2.10 3.33 0.90 3312-033 Profile 30×30 Quarter Round 2.48 2.48 1.51 1.51 3.13 0.85 3412-034 Profile 30×30 Bi-Slot Corner 3.52 3.51 2.24 2.23 3.69 1.00 3312-060 Profile 30×60 6.12 21.20 4.08 7.07 6.19 1.68 3530 Series Profiles T-Slot DetailService Counterbore [19-015] 20mm dia.by 11mm deep hole for universal fastenerUniversal Fastener Set [20-008]comprised of the following parts:M6T-Nut [20-056]Universal Fastener [20-008z1]Socket Head Cap Screw [24-327-6] Socket Head Cap Screw [24-350-6] Butt Fastener [20-012]Counterbore [19-015]20mm dia.deep hole for universal.by 11mm End of profile tapped[19-010] to receiveM8 screw ofstandard fastener.Standard Fastener [20-003]comprised of parts:[20-003Z1][24-118-8]7mm access hole drilled [19-011]through extrusion for access tostandard fastener by M5 Allen wrench 2082.09.8 ∅6.730 Series 32 Industrial Profile SystemsProfilesCatalog 1816-3/US 33Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA12-030 ApplicationDesigned for general structures, safety guards and partition frames, light duty enclosures and industrial peripherals. Profile 12-034 has closed faces on two perpendicular sides making it ideal for constructing smooth corners. Technical DataAluminum, Clear Anodized (See Technical Data page 9 for full material and finish specifications)Part # IX IY WX WY Section Weight [cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]12-030 3.15 3.15 2.10 2.10 3.33 0.9012-034 3.52 3.51 2.24 2.23 3.69 1.00Ordering InformationDescription Unit Part # (Clear) Profile 30×30 Cut off max. 6m 12-030 Profile 30×30 Bi-Slot Corner Cut off max. 6m 12-034 *Saw Cut Needed for Cut to Length 19-001 Quick Reference for Mating ComponentsFasteners Structural Accessories Standard Fastener 20-003 Corner Bracket 30 22-150 Universal Fastener 20-008 Connector Cap 30 (Sq) 22-152End Caps Leveling Foot 21-001-30 30×30 18-803 T-Slot Nuts Page 8230×30 Profiles12-034 3030 3030 30 Series 34Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsProfilesCatalog 1816-3/US 35 12-033 ApplicationDesigned with a quarter round smooth face and T-Slots, this profile is particularly useful for engineering frames, shelving or enclosures where a radius edge is aesthetically or functionally desirable. Technical DataAluminum, Clear Anodized (See Technical Data page 9 for full material and finish specifications)Part # IX IY WX WY Section Weight [cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]12-033 2.48 2.48 1.51 1.51 3.13 0.85Ordering InformationDescription Unit Part #Profile 30×30 Quarter Round Cut off max. 6m 12-033 *Saw Cut Needed for Cut to Length 19-001 Quick Reference for Mating ComponentsFasteners Corner Connector Caps Pg. 98 Flat Plate Fastener 20-028 Connector Cap, Radius 22-151 Miter Connector 30 20-024 Tap Profile End for M8 19-010 Corner Bracket 30 22-150 45o Miter Cut 19-104 30×30 Quarter Round 30 30 30QuarterRound[12-033] M8BHCS RadiusCap30[22-151] CornerBracket30[22-150] 30 Series 34 Industrial Profile SystemsProfilesCatalog 1816-3/US 35Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA12-060 ApplicationThese profiles are ideal for general use structures, safety guards and partition frames, light duty enclosures and industrial peripherals. Technical DataAluminum, Clear Anodized (See Technical Data page 9 for full material and finish specifications)Part # IX IY WX WY Section Weight [cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]12-060 6.12 21.20 4.08 7.07 6.19 1.68Ordering InformationDescription Unit Part # Profile 30×60 Cut off max. 6m 12-060 *Saw Cut Needed for Cut to Length 19-001 Quick Reference for Mating ComponentsFasteners T-Nut Examples Standard Fastener 20-003 M6 Roll-In 20-056Universal Fastener 20-008 M8 Roll-In 20-058End Caps M8/40 Double Roll-In 20-04930×60 18-863 T-Slot Nut, HD M8 20-06460×30 Profiles 60 30 30 Series 36Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsProfilesCatalog 1816-3/US 37 Moment of Inertia Section Modulus IX IY WX WY Section Weight Cat.Part # Description [cm4] [cm4] [cm3] [cm3] [cm2] [kg/m] Page12-028 Profile 28×28 Quad-Slot 2.37 2.27 1.70 1.62 2.96 0.81 3712-428 Profile 28×56 Open Slot 4.65 16.42 3.32 5.86 5.60 1.51 3712-056 Profile 56×56 Light 30.44 30.44 10.87 10.87 8.87 2.40 3712-128 Profile 28×28 Tri-Slot 2.64 2.35 1.78 1.68 3.12 0.84 3812-228 Profile 28×28 Bi-Slot 2.69 2.69 1.83 1.83 3.32 0.90 3812-328 Profile 28×28 Bi-Slot Mid-Frame 2.41 3.00 1.72 2.14 3.32 0.90 3812-044 Profile 28×28 45 Deg. 1.97 1.97 1.28 1.28 2.87 0.78 3912-628 Profile 28×56 Bi-Slot 5.92 18.01 4.23 6.43 6.36 1.72 4012-728 Profile 28×56 Quad-Slot 5.23 17.10 3.53 6.11 5.96 1.62 4028 Series Profiles T-Slot DimensionsService AØ6.71882.08.6 Counterbore [19-015] 20mm dia.by11mm deep hole for universal fastenerUniversal Fastener Set [20-005]comprised of the following parts:M6T-Nut [20-055]Universal Fastener [20-005Z1]Socket Head Cap Screw [24-327-6] Socket Head Cap Screw [24-350-6] Butt Fastener [20-012]Counterbore [19-015]20mm dia.deep hole for universal.by 11mm End of profile tapped[19-010] to receiveM8 screw ofstandard fastener.Standard Fastener [20-003]comprised of parts:[20-003Z1][24-118-8]7mm access hole drilled [19-011]through extrusion for access tostandard fastener by M5 Allenwrench 28 Series 36 Industrial Profile SystemsProfilesCatalog 1816-3/US 37Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA12-028 ApplicationThese profiles are designed with T-slot faces on all four sides. They are useful for constructing safety guards, partition frames, light duty enclosures and industrial peripherals.Technical DataAluminum, Clear Anodized (See Technical Data page 9 for full material and finish specifications)Part # IX IY WX WY Section Weight [cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]12-028 2.37 2.27 1.70 1.62 2.96 0.8112-428 4.65 16.42 3.32 5.86 5.60 1.5112-056 30.44 30.44 10.87 10.87 8.87 2.40Ordering InformationDescription Unit Part #Profile 28×28 Quad-Slot Cut off max. 6m 12-028 Profile 28×56 Open Slot Cut off max. 6m 12-428 Profile 56×56 Cut off max. 6m 12-056 *Saw Cut Needed for Cut to Length 19-001 Quick Reference for Mating ComponentsFasteners T-Nut Examples Standard Fastener 20-003 Roll-In Single M6 20-055 Universal Fastener 20-005 Roll-In Single M8 20-057End Caps Economy Standard M6 20-090 28×28 18-808 Economy Offset M6 20-190 28×56 18-809 Economy Standard M8 20-091 Economy Offset ¼-20 20-19328×28, 56×28 and 56×56 Slotted Profiles 12-05612-428 28 28 56 28 5656 InquireaboutCustomTops 28 Series 38Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsProfilesCatalog 1816-3/US 39 12-12812-32812-228 ApplicationDesigned with various closed faces, these profiles provide efficient fastening in a variety of configurations while retaining a smooth exterior for an aesthetically clean look. Technical DataAluminum, Clear Anodized (See Technical Data page 9 for full material and finish specifications)Part # IX IY WX WY Section Weight [cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]12-128 2.64 2.35 1.78 1.68 3.12 0.8412-228 2.69 2.69 1.83 1.83 3.32 0.9012-328 2.41 3.00 1.72 2.14 3.32 0.90Ordering InformationDescription Unit Part #Profile 28×28 Tri-Slot Cut off max. 6m 12-128 Profile 28×28 Bi-Slot Cut off max. 6m 12-228 Profile 28×28 Bi-Slot Mid-Frame Cut off max. 6m 12-328 *Saw Cut Needed for Cut to Length 19-001 Quick Reference for Mating ComponentsFasteners End Caps Flat Plate Fastening Set 20-028 28×28 18-808 Universal Fastening Set 20-005 Standard Fastener 20-003 28×28 Closed Face Square Profiles 2828 2828 2828 28 Series 38 Industrial Profile SystemsProfilesCatalog 1816-3/US 39Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA ApplicationDesigned with an angled closed face and T-Slots on two sides. This profile is ideal for applications where perpendicular surfaces are not desired. Technical DataAluminum, Clear Anodized (See Technical Data page 9 for full material and finish specifications)Part # IX IY WX WY Section Weight [cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]12-044 1.97 1.97 1.28 1.28 2.87 0.78Ordering InformationDescription Unit Part # Profile 28×28 45° Cut off max. 6m 12-044 *Saw Cut Needed for Cut to Length 19-001Quick Reference for Mating ComponentsFasteners T-Nut Examples Flat Plate Fastening Set 20-028 Roll-In Single M6 20-055End Caps Roll-In Single M8 20-057 28×28-45o 18-844 Economy Standard M6 20-090 28×28 Angled Closed Face Profile12-044 45°2828 28 Series 40Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsProfilesCatalog 1816-3/US 41 ApplicationDesigned with various closed faces, these profiles provide efficient fastening in a variety of configurations while retaining a smooth exterior for an aesthetically clean look. Technical DataAluminum, Clear Anodized (See Technical Data page 9 for full material and finish specifications)Part # IX IY WX WY Section Weight [cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]12-628 5.92 18.01 4.23 6.43 6.36 1.7212-728 5.23 17.10 3.53 6.11 5.96 1.62Ordering InformationDescription Unit Part #Profile 28×56 Bi-Slot Cut off max. 6m 12-628 Profile 28×56 Quad-Slot Cut off max. 6m 12-728 *Saw Cut Needed for Cut to Length 19-001Quick Reference for Mating ComponentsFasteners End Caps Flat Plate Fastening Set 20-028 28×56 18-809 Universal Fastening Set 20-005 Standard Fastener 20-00356×28 Closed Face Profiles12-72812-628 28 56 28 5628 Series 40 Industrial Profile SystemsProfilesCatalog 1816-3/US 41Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Moment of Inertia Section Modulus IX IY WX WY Section Weight Cat.Part # Description [cm4] [cm4] [cm3] [cm3] [cm2] [kg/m] Page12-120 Profile 20×10 0.12 0.53 0.22 0.53 1.29 0.35 4212-020 Profile 20×20 0.73 0.73 0.73 0.73 1.80 0.52 4212-040 Profile 40×40 20 Series 8.74 8.74 4.37 4.37 4.83 1.32 4312-124 Profile 20×40 1.33 5.03 1.33 2.52 3.16 0.86 4220 Series Profiles T-Slot DetailService 125Ø4.31.86.4B End of profile tapped[19-010] to receiveM5 screw ofstandard fastener.Standard Fastener [20-021]comprised of parts:[20-021Z1][24-112-5]7mm access hole drilled [19-011]through extrusion for access tostandard fastener by M5 Allen wrench 20 Series 42Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsProfilesCatalog 1816-3/US 43 12-120 Application20 Series profiles are designed for light duty enclosures and fixtures. They are also useful in building light accessories and components on workstations or assembly tables. The 5mm T-slot requires 20 Series hardware.Technical DataAluminum, Clear Anodized (See Technical Data page 9 for full material and finish specifications)Part # IX IY WX WY Section Weight [cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]12-120 0.12 0.53 0.22 0.53 1.29 0.3512-020 0.73 0.73 0.73 0.73 1.80 0.5212-124 1.33 5.03 1.33 2.52 3.16 0.86Ordering InformationDescription Unit Part # (Clear) Profile 20×10 Cut off max. 3m 12-120 Profile 20×20 Cut off max. 3m 12-020 Profile 20×40 Cut off max. 3m 12-124 *Saw Cut Needed for Cut to Length 19-001 Quick Reference for Mating ComponentsFasteners End Caps Standard Fastener 20-021 20×10 18-830 20×20 18-802 20×40 18-83120×10, 20×20 & 40×20 Profiles12-12412-020 2010 2020 402020 Series 42 Industrial Profile SystemsProfilesCatalog 1816-3/US 43Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA12-040 40×40 Profile 4040 Application20 Series profiles are designed for light duty enclosures and fixtures. They are also useful in building light accessories and components on workstations or assembly tables. The 5mm T-Slot requires 20 Series hardware.Technical DataAluminum, Clear Anodized (See Technical Data page 9 for full material and finish specifications)Part # IX Iy WX Wy Section Weight [cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]12-040 8.74 8.74 4.37 4.37 4.83 1.32Ordering InformationDescription Unit Part # (Clear) Profile 40×40, 20 Series Cut off max. 4m 12-040 *Saw Cut Needed for Cut to Length 19-001 Quick Reference for Mating ComponentsFasteners End Caps Standard Fastener 20-021 40×40 18-832T-Nuts Roll-In Single M4 20-044 Roll-In Single M5 20-045 20 Series 44Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsProfilesCatalog 1816-3/US 45 ServicingforUniversaUniversal FastenerServicingForStandardFastener(End)ServicingForStandardFastener(Side) Ø0.281DRILLTHRU0.75″FROMEND TAP5/16-18X Ø0.813″X0.625″DEEP0.813″FROMEND0.75″DEEP1.5″ SeriesStandardHeavyT-Slot Detail Service Part #DescriptionMoment of InertiaSection ModulusSection [cm2]Weight [kg/m]PageIx [cm4]Iy [cm4]Wx [cm3]Wy [cm3]10-15151.5″ x 1.5″ Standard Profile8.498.494.464.466.191.704510-15303″ x 1.5″ Standard Profile15.1561.857.9516.2310.382.814810-15431.5″ Quarter Round Profile6.166.162.902.905.481.474710-15606″ x 1.5″ Standard Profile27.97420.8914.6855.2418.336.985010-15911.5″ x 1.5″ Mono-Slot Profile8.538.704.474.576.201.684610-15921.5″ x 1.5″ Bi-Slot Corner Profile8.628.624.514.513.241.684610-15931.5″ x 1.5″ Tri–Slot Profile8.668.494.534.466.221.694610-15941.5″ x 1.5″ Bi-Slot Midframe Profile8.788.454.614.446.211.684610-30303″ x 3″ Standard Profile113.38113.3829.7629.7617.424.724911-15151.5″ x 1.5″ Heavy Profile11.2411.245.905.907.742.104511-15303″ x 1.5″ Heavy Profile21.1078.7911.0820.6814.003.724811-30303″ x 3″ Heavy Profile146.43146.4338.4338.4322.616.044912-15151.5″ x 1.5″ Light Profile7.087.083.723.724.821.314512-15303″ x 1.5″ Light Profile13.1049.636.8813.038.432.28481.5″ Series Ø.2656″ Ø.201″ .482″ .787″ .177″ .320″ .320″.787″ .17 7″ .482″ Ø.2656″ 44 Industrial Profile SystemsProfilesCatalog 1816-3/US 45Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Part #Ix[cm4]Iy[cm4]Wx[cm3]Wy[cm3]Section [cm2]Weight [kg/m]10-15158.498.494.464.466.191.7011-151511.2411.245.905.907.742.1012-15157.087.083.723.724.821.31Application10-1515 and 11-1515 are ideal general purpose extrusions for guards, enclosures, work stations, tool carts and smaller machine frames. T-slots on four sides allows for effortless mounting of accessories directly onto the structure without additional machining.Technical DataAluminum, Clear Anodized (See Technical Data page 9 for full material and finish specification)11-151510-1515Ordering InformationDescription Unit Part #1.5″ x 1.5″ Light Profile Cut off max 240 in 12-15151.5″ x 1.5″ Standard Profile Cut off max. 240 in 10-15151.5″ x 1.5″ Heavy Profile Cut off max. 240 in 11-1515* Saw cut needed for Cut to Length 19-001 Quick Reference for Mating ComponentsFasteners T-Nuts 1.5″ Standard Fastener 25-003 1/4-20 Roll-In 25-001 1.5″ Single Fastener 25-014 5/16-18 Roll-In 25-002 1.5″ Universal Fastener 25-004 5/16-18 Double Roll-In 25-041End Caps 1/4-20 Economy 20-083 1.5″ x 1.5″ 18-1515 5/16-18 Economy 20-082 1.50″ 1.50″ 12-1515 ServicingforUniversaUniversal FastenerServicingForStandardFastener(End)ServicingForStandardFastener(Side)Ø0.281DRILLTHRU0.75″FROMENDTAP5/16-18XØ0.813″X0.625″DEEP0.813″FROMEND0.75″DEEP 1.5″ x 1.5″ Slotted Profiles1.5″ Series 1.50″ 1.50″ 1.50″ 1.50″ 46Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsProfilesCatalog 1816-3/US 47 1.5″ x 1.5″ Closed Face Profiles10-159410-159310-159210-1591 You must use 25-022 (Flat Standard Fastener), 25-014 (Single Ended Standard Fastener) or 25-004 (Universal Fastener) when attaching to the end of the closed slot profiles (as shown).ApplicationThese profiles are designed with various closed faces. They are particularly useful when a smooth appearance is desired. The smooth surfaces are ideal for clean room, packaging, medical and pharmaceutical applications. The option of different T-slotted faces is ideal for fastening the profiles while retaining a smooth exterior to create the most aesthetic appearance.Technical DataAluminum, Clear Anodized (See Technical Data page 9 for full material and finish specification)Ordering Information Description Unit Part #1.5″ x 1.5″ Mono Slot Profile Cut off max. 240 in 10-15911.5″ x 1.5″ Bi-Slot Corner Profile Cut off max. 240 in 10-15921.5″ x 1.5″ Tri-Slot Profile Cut off max. 240 in 10-15931.5″ x 1.5″ Bi-Slot Midframe Profile Cut off max. 240 in 10-1594* Saw cut needed for Cut to Length 19-001Quick Reference for Mating ComponentsFasteners Structural Accessories 1.5″ Flat Standard Fastener 25-022 Panels pg 112 1.5″ Single Fastener 25-014 Hinges pg 138 1.5″ Universal Fastener 25-004 Catches pg 150End Caps Gussets pg 104 1.5″ x 1.5″ 18-1515 Part #Ix[cm4]Iy[cm4]Wx[cm3]Wy[cm3]Section [cm2]Weight [kg/m]10-15918.538.704.474.576.201.6810-15928.628.624.514.516.241.6810-15938.668.494.534.466.221.6910-15948.788.454.614.446.211.681.5″ Series 1.50″ 1.50″ 1.50″ 1.50″ 1.50″ 1.50″ 1.50″ 1.50″ 46 Industrial Profile SystemsProfilesCatalog 1816-3/US 47Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA1.5″ x 1.5″ Quarter Round Profile 1.50″ 1.50″ 10-1543ApplicationThis profile is designed with curved surfaces while retaining T-slotted surfaces for connecting. This is particularly useful for rounding or smoothing off corners of structures where ergonomics apply. The smooth surfaces are ideal for clean room, medical and pharmaceutical applications. Technical DataAluminum, Clear Anodized (See Technical Data page 9 for full material and finish Specification)Ordering Information Description Unit Part #1.5″ Quarter Round Profile Cut off max. 240 in 10-1543* Saw Cut Needed for Cut to length 19-001Quick Reference for Mating ComponentsFasteners End Caps 1.5″ Standard Fastener 25-003 1.5″ Quarter (for 10-1543) 18-1543 1.5″ Single End Standard 25-014 1.5″ Radius 1.5″ Universal Fastener 25-004 (for Corner Connector) 22-154Corner Connector 1.5″ Corner Connector 22-153 Part #Ix[cm4]Iy[cm4]Wx[cm3]Wy[cm3]Section [cm2]Weight [kg/m]10-15436.166.162.902.905.481.471.5″ Series 1.5″QuarterRound[10-1543] 5/16-18X3/4BHCS [25-112-5] 1.5″Radius[22-154] 1.5″CornerConnector[22-153]MinimumTapDepth0.75″ 48Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsProfilesCatalog 1816-3/US 49 ApplicationProfiles 10-1530 and 11-1530 are ideal general purpose extrusions for guards, enclosures, work stations, tool carts and machine frames. They are designed with a high inertial strength in the ‘y’ axis. This allows higher structural integrity to create more stable and rigid structures. T-slots on four sides allow for effortless mounting of accessories directly onto the structure without additional machining. Technical DataAluminum, Clear Anodized (See Technical Data page 9 for full material and finish Specification)Ordering Information Description Unit Part #3″ x 1.5″ Light Profile Cut off max 240 in 12-15303″ x 1.5″ Standard Profile Cut off max. 240 in 10-15303″ x 1.5″ Heavy Profile Cut off max. 240 in 11-1530 * Saw Cut Needed for Cut to length 19-001 Quick Reference for Mating ComponentsFasteners T-Nuts 1.5″ Standard Fastener 25-003 1/4-20 Roll-In 25-001 1.5″ Universal Fastener 25-004 5/16-18 Roll-In 25-002End Caps 5/16-18 Double Roll-In 25-041 3″ x 1.5″ 18-1530 1/4-20 Economy 20-083 5/16-18 Economy 20-0823″ x 1.5″ Profiles10-153011-153012-1530 Part #Ix[cm4]Iy[cm4]Wx[cm3]Wy[cm3]Section [cm2]Weight [kg/m]10-153015.1561.857.9516.2310.382.8111-153021.1078.7911.0820.6814.003.7212-153013.1049.636.8813.038.432.281.5″ Series 3.00″ 1.50″ 1.50″ 3.00″ 1.50″ 3.00″ 48 Industrial Profile SystemsProfilesCatalog 1816-3/US 49Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA In quireabout Cu stomTops10-303011-30303″ x 3″ ProfilesApplicationThese profiles are designed for medium to heavy duty structures and are ideal for structural support and post applications. These profiles have high structural integrity to create extra stable and rigid structures. T-slots on four sides allow for effortless mounting of accessories directly onto the structure without additional machining. Technical DataAluminum, Clear Anodized (See Technical Data page 9 for full material and finish specification)Ordering Information Description Unit Part #3″ x 3″ Standard Profile Cut off max. 240 in 10-30303″ x 3″ Heavy Profile Cut off max. 240 in 11-3030* Saw Cut Needed for Cut to length 19-002 Quick Reference for Mating ComponentsFasteners Structural Accessories 1.5″ Standard Fastener 25-003 Levelers pg 156 1.5″ Universal Fastener 25-004 Casters pg 167End Caps Plates pg 102 3″ x 3″ 18-3030 Gussets pg 104 Part #Ix[cm4]Iy[cm4]Wx[cm3]Wy[cm3]Section [cm2]Weight [kg/m]10-3030113.38113.3829.7629.7617.424.7211-3030146.43146.4338.4338.4322.616.041.5″ Series 3.00″ 3.00″ 3.00″ 3.00″ 50Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsProfilesCatalog 1816-3/US 51 6″ x 1.5″ Profiles Application10-1560 is designed for heavy duty structures and is an ideal profile for structural support and post applications. 10-1560 is designed with a high inertial strength in the ‘y’ axis. This allows for very high structural integrity to create extra stable and rigid structures. T-slots on four sides allow for effortless mounting of accessories directly onto the structure without additional machining. Because of its multiple T-slots, it is also an ideal profile for a fixture table.Technical DataAluminum, Clear Anodized (See Technical Data page 9 for full material and finish specification.)Ordering Information Description Unit Part #6″ x 1.5″ Profile Cut off max. 240 in 10-1560* Saw Cut Needed for Cut to length 19-003 Quick Reference for Mating ComponentsFasteners T-Nuts 1.5″ Standard Fastener 25-003 1/4-20 Roll-In 25-001 1.5″ Universal Fastener 25-004 5/16-18 Roll-in 25-002End Caps 5/16-18 Double Roll-In 25-041 3″ x 1.5″ 18-1530 1/4-20 Economy 20-083 (Use 2 per end) 5/16-18 Economy 20-08210-1560 Part #Ix[cm4]Iy[cm4]Wx[cm3]Wy[cm3]Section [cm2]Weight [kg/m]10-156027.97420.8914.6855.2418.336.981.5″ Series 6.00″ 1.50″ 50 Industrial Profile SystemsProfilesCatalog 1816-3/US 51Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA1″ Series Ø0.202 0.255″ 0.593″ 0.095″ 0.319″ ServicingForUniversalServicingForStandardFastener(End)ServicingForStandardFastener(Side) Ø0.563″X0.430″DEEP0.5″FROMEND TAP1/4-20X Ø0.219″DRILLTHRU0.5″FROMEND Fastener 0.625″DEEPT-Slot Detail Service Part #DescriptionMoment of InertiaSection ModulusSection [cm2]Weight [kg/m]PageIx [cm4]Iy [cm4]Wx [cm3]Wy [cm3]12-1010Profile 1″ x 1″1.911.911.511.512.840.775212-1020Profile 2″ x 1″3.6213.032.855.135.161.415212-2020Profile 2″ x 2″23.6823.689.329.328.132.2152 1″ Series 52Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsProfilesCatalog 1816-3/US 53 1″ x 1″, 2″ x 1″ and 2″ x 2″ Profiles12-2020 12-101012-1020Application1″ Series profiles are designed for safety guards, enclosures, shelves, and other light to medium duty applications. T-Slots on four sides allows for effortless mounting of accessories directly onto the structure without additional machining. The T-slot is smaller than the 1.5″ Series, requiring different hardware. With profile 12-1020, higher rigidity can be attained by orienting the extrusion on its ‘y’ axis.The 12-2020 profiles are ideal for support and post applications. With their higher rigidity, structures can be built with higher stability.Technical DataAluminum, Clear Anodized (See Technical Data page 9 for full material and finish Specification)Ordering InformationDescription Unit Part #1″ x 1″ Profile Cut off max. 240 in 12-10102″ x 1″ Profile Cut off max. 240 in 12-10202″ x 2″ Profile Cut off max. 240 in 12-2020* Saw Cut Needed for Cut to length 19-001 Quick Reference for Mating ComponentsFasteners Structural Accessories 1″ Standard Fastener 25-022 Levelers pg 156 1″ Universal Fastener 25-023 Casters pg 167End Caps Plates pg 102 1″ x 1″ (for 12-1010) 18-1010 Gussets pg 104 2″ x 1″ (for 12-1020) 18-1020 2″ x 2″ (for 12-2020) 18-2020 Part #Ix[cm4]Iy[cm4]Wx[cm3]Wy[cm3]Section [cm2]Weight [kg/m]12-10101.911.911.511.512.840.7712-10203.6213.032.855.133.161.4112-202023.6823.689.329.328.132.211″ Series 1.00″1.00″ 1.00″2.00″ 2.00″ 2.00″ 52 Industrial Profile SystemsProfilesCatalog 1816-3/US 53Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Profile TypeCompatibilityPart #DescriptionPageBi-Slot 12-032Profile 18×32 Bi-Slot54Rolling Door Guides 12-022Profile Rolling Door Guide55 12-421Guide Profile UHMW55Sliding Door Guides 40 1.5″12-012Profile Sliding Door Guide 40 Upper56 401.5″ 12-013Profile Sliding Door Guide 40 Lower562830 12-014Profile Sliding Door Guide 30/28 Upper562830 12-015Profile Sliding Door Guide 30/28 Lower56Stiffener/Handle Profile 12-011Profile Stiffener / Handle57Mesh Clamp2830401.5″ 12-010Profile Mesh Clamp58Panel Holder283040 1.5″12-016 BProfile Panel Holder – Black57Clamp Bar 40 1.5″12-105Profile Clamp58Rack Angle283040 1.5″12-109Profile Rack Angle with Holes592830401.5″ 12-110Profile Rack Angle no Holes59 1.5″ 20-075Rack Angle Clip Nut M559 1.5″ 20-076Rack Angle Clip Nut M6591.5″25-075Rack Angle Clip Nut #10-32591.5″25-076Rack Angle Clip Nut 1/4-2059UHMW Slide Bar 40 1.5″12-400Slide Bar UHMW60 40 1.5″12-420Slide Bar UHMW 40×10602830 12-430Slide Bar UHMW 28/30×860283040 1.5″12-410Slide Strip UHMW60Panel Gasket12-106Panel Gasket 86112-108Panel Gasket 1061Mesh Gasket12-107Mesh Gasket 861Cover/Gasket Strips401.5″12-101Cover/Gasket Strip 40622812-103BCover/Gasket Strip 286212-115Cover/Gasket Strip 20624012-117Push-In Panel Seal62Cover Strips401.5″12-102Aluminum Cover Strip62401.5″12-111PVC Cover Strip62283012-116PVC Cover Strip62Safety Cover401.5″12-113Safety Cover62Specialty ProfilesSpecialty Profiles 54Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsProfilesCatalog 1816-3/US 55 12-03232×18 Bi-Slot ProfileApplicationSuitable for guarding, sliding doors, and enclosures. Panels up to 9mm thick may be clamped using spring clamp (22-032).T-Slots will accept 6mm panels with Panel Gasket 8 or 10 (12-106 and 12-108). Ordering InformationDescription Unit Part # Profile 18×32 Bi-Slot Cut off max. 6m 12-032 *Saw Cut Needed for Cut to Length 19-001 Quick Reference for Mating ComponentsFasteners Structural Accessories 32×18 Bi-Slot Fastener 20-132 Panel Gasket 8 12-106 Clamp Spring 22-032 Panel Gasket 10 12-108End Caps Roller Insert Set 21-068 32×18 18-807 Guide Insert Set 21-067Technical DataAluminum, Clear Anodized Weight 0.67 kg/mFastening Set: Steel, galvanized Weight: 9.0 gClamp Spring: Steel Weight: 4g Ø4.2 10 12.33212.3818 18-80720-13212-108 10 7 6 32 18 15 14 9.6 M5x207.6 3TYP 11 GuideInsertSet[21-067] RollerInsertSet[21-068] 32x18EndCap[18-807] 6mmPanelUsing12-106Gasket PanelGasket10[12-108] 6mmPanel 32x18DoorProfile[12-032](SmallT-slotFacingout) 32x18Fastener[20-132] TapM5x14 32x18DoorProfile[12-032](LargeT-Slotfacingin)FrameforholdingpanelswithsmallT-slotfacingout.(Nomillingrequired) 6mmPanel 32x18DoorProfile[12-032](SmallT-Slotfacingin) 32x18Fastener[20-132] PanelGasket8[12-106]FrameforholdingpanelswithlargeT-slotfacingout.(Youmustmillslotforfastener) MillSlot Ø7 16 10 13 MillDetail Specialty Profiles 54 Industrial Profile SystemsProfilesCatalog 1816-3/US 55Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA12-02221-06721-07321-06821-07512-421Rolling Door Guide ProfileApplicationDesigned for large doors with removable door panels for maintenance. Applications include case packers, material handling equipment, packaging installations and access panels for large machine enclosures.Ordering InformationDescription Unit Part # Profile Rolling Door Guide 3m each 12-022 Guide Profile UHMW Cut off max. 3.1m 12-421 *Saw Cut Needed for Cut to Length 19-001Technical DataProfileAluminum, Clear Anodized Weight: 1.78 kg/mGuide InsertUHMW (white)Roller InsertRoller: Delrin (black), Pin: Steel Housing: Aluminum, Clear Anodized Guide Insert Set 40 Series (A=25mm) 21-067 1.5″ Series (A=1″) 21-073Guide Set including (1) 50mm guide insert, (2) setscrews Roller Insert Set 40 Series (A=40mm) 21-0681.5″ Series (A=1.5″) 21-075 Roller Set includes (1) Housing, (1) roller, (2) SCHS screws and (2) Offset T-Slot nuts with compression spring 3X10 60 66 21 12 6 10 24.53.514 42*Recommendfastenerevery250mm1 5 3416mm(1/4″)PanelVinylPanelGasket[12-106]T-Slot8T-Slot10RollerInsert[21-068]GuideInsert[21-067]FasteningSeeDetail4ACB8.023.524.5M5x12BHCS[24-112-5]FlatPlateConnector[20-028z1]Drill&TapM5x10mmDeepOnCenter2mmGap2mmGap2040SeriesProfileRollingDoorGuideProfile[12-022]DoorFramedby32x18Bi-Slot[12-032]HandleStandardFasteningSet[20-002]Leave5mmClearanceforStd.FastenerConnectionMethod1ORConnectionMethod2MillKeyBack5mm Specialty Profiles M6x16SetScrews25 10 50 A M6x14SHCS[24-314-6] M6Econ.T-Nut[20-190]A 52 10 Ø25.4 9.9 18 Opt.Spring [24-719-6] 56Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsProfilesCatalog 1816-3/US 57 12-01212-01512-01412-013Sliding Door Guide ProfileApplicationThese profiles create light duty sliding panels for windows and access ports for safety guards, enclosures or partitions. Installation onto 40, 30, 28 or 1.5″ Series profiles do not require fasteners and will snap into the T-Slot. The lower guides are designed to reduce friction. The upper guides facilitate lift-out removal of the panel without disassembly. Tamper proof mounting may also be provided.Ordering InformationDescription Unit Part #40/1.5″ Series Profile Sliding Door Guide 40/1.5″ Upper 3m each 12-012 Profile Sliding Door Guide 40/1.5″ Lower 3m each 12-01328/30 Series Profile Sliding Door Guide 30/28 Upper 3m each 12-014 Profile Sliding Door Guide 30/28 Lower 3m each 12-015 *Saw Cut Needed for Cut to Length 19-001Quick Reference for Mating ComponentsStructural Accessories Panels Page 112 Technical DataAluminum, Clear AnodizedThree panel tracksPanel width up to 6.4mmWeight: 12-012, 12-014 0.45kg/m 12-013, 12-015 0.50kg/m 177TYP.312.5TYP. 7TYP. 2.5TYP.1031R2 2 16.921.6287 28 7TYP.1.5TYP.102 R2 AnyPanel(upto1/4″) SlidingDoorGuideLower SlidingDoorGuideUpperA B 28Series Stiffener/Handle[12-011] *Designed for panels up to 1/4” (6.4mm)B = A – 15mm for removable doorsB = A – 10mm for non-removable doorsSpecialty Profiles 56 Industrial Profile SystemsProfilesCatalog 1816-3/US 57Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAApplicationDesigned as a combination handle and stiffener for sliding panel doors (1/4″ thick material). Panels snap into the profile slot and may be secured by an adhesive or a fastener. Stiffener/Handle ProfileTechnical DataAluminum, Clear Anodized Weight: 0.93kg/mOrdering InformationDescription Unit Part # Panel Handle Stiffener 3m each 12-011 *Saw Cut Needed for Cut to Length 19-001 12-011 4.61810.723.9 6.1 Stiffener/Handle[12-011] Specialty ProfilesApplicationProfile designed for panels 3-6mm thick. Built-in seal for splash guard applications. Can be used for 40, 30, 28 and 1.5″ Series profiles. 12-016Panel HolderOrdering InformationDescription Unit Part # (Black)Panel Holder Profile Cut off max. 2m 12-016B *Saw Cut Needed for Cut to Length 19-001Technical DataBase: Rigid PVC Lip Seal: VinylWeight: 0.16kg/m 265.316.9 Panel Material3-6mmPanel Holder Profile(consists of two pieces)40, 30 or 28 SeriesProfile 58Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsProfilesCatalog 1816-3/US 59 ApplicationCaptures wire mesh panels up to 5.5mm thick. Excellent for constructing safety guards. Installs onto 40, 30, 28 and 1.5″ series profiles without additional fasteners.12-010Mesh Clamp ProfileTechnical DataAluminum, Clear Anodized Weight: 0.53 kg/mTapped for M6 every 200mm (±2mm) Includes clamp strip and M6X6 flat point screwsOrdering InformationDescription Unit Part # Mesh Clamp Profile 3m each 12-010 *Saw Cut Needed for Cut to Length 19-001 ApplicationAttaches 40 Series profiles to base plates or other parts. Must be used in pairs. Not recommended for linear applications. 12-105Clamp BarTechnical DataAluminum, Clear Anodized Weight: 1.24 kg/mOrdering InformationDescription Unit Part # Clamp Bar Profile 2m each 12-105 *Saw Cut Needed for Cut to Length 19-001 2015205 A B Length=A-1mm Length=B-33mm*WireMeshSize:A-6mmandB-6mmStandard fastener position iscritical to avoid interferencewith the mesh clamp. M8BHCS CuttoLengthandServiceasrequired. 200mm±2mmTYP FlatBar12.7×3.2 M6x6SetScrew [25-506-6F]18 0-5.5 8 2 15.8 Specialty Profiles 58 Industrial Profile SystemsProfilesCatalog 1816-3/US 59Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA12-109 Rack Angle ProfileTechnical DataExtrusionAluminum, Clear Anodized Weight: 12-109 0.62kg/m 12-110 0.63kg/mIncludes M6X12 flat point set screwsClip Nut (Order separately)Steel, Zinc Plated Weight 5gApplicationUsed for attaching standard 19″ rack components to 40, 30, 28 and 1.5″ Series Profiles (30 and 28 series require installation from end of profile). 12-109 is machined with square holes for installation of a Clip Nut. Clip Nut snaps into square holes for attaching panels and accessories.12-110 is blank and can be used to support horizontal panels such as ceiling tiles. Ordering InformationDescription Unit Part # Profile Rack Angle with Holes 3m each 12-109 Profile Rack Angle no Holes 3m each 12-110 *Saw Cut Needed for Cut to Length 19-001 Rack Angle Clip Nut M5 1 pc 20-075 Rack Angle Clip Nut M6 1 pc 20-076Rack Angle Clip Nut #10-32 1 pc 25-075Rack Angle Clip Nut 1/4-20 1 pc 25-076 12-110 5.8 2.51827.64.813.71324 (19”) 27 67 10.5 50.5 1 Mounting dimensions2 Inserting rack angle into 40 series T-slot3 Rack Angle is secured in T-slot with set screw M6x12. Requires 2 cuts to ensure matching pair4 Panel is attached to Rack Angle with M5 or M6 screw and clip nut 50 100TYP 2.9mMAX 3.2 15.9 15.9 9.5 9.5 M644.5(1U) 2.9mMAX 50 100TYP M6 Specialty Profiles20-07520-07625-07525-076 60Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsProfilesCatalog 1816-3/US 61 12-40012-41012-43012-420UHMW Slide Bar & Slide StripApplicationDurable, low-friction material that is self lubricating and easily machined. These profiles provide a smooth gliding surface for a wide range of applications including linear systems to adjustable work surfaces or sliding panels. Technical DataExtrusionUHMW, White 40/1.5″ Series Applications use: 12-400, 12-420, and 12-41028/30 Series Applications use: 12-430 or 12-410Ordering InformationDescription Unit Part #Slide Bar UHMW Cut off max. 3m 12-400Slide Bar UHMW 40×10 Cut off max. 3m 12-420Slide Bar UHMW 28/30×8 Cut off max. 3m 12-430Slide Strip UHMW Cut off max. 3m 12-410 *Saw Cut Needed for Cut to Length 19-001 39.6 39.64.77.916 39.6 104.77.816 27 827.916 31.8 5.47.97.9 ServiceSlidebaranduseappropriatescrewsandt-nuts. Specialty ProfilesAnti-Skid Cover12-114ApplicationCover for 40 and 1.5″ Series profiles is used for non-slip surfaces such as ladders and stops for sliding doors. Oil and water resistant.Technical DataRubber, BlackHardness 80 ShoreOrdering Information Description Unit Weight Part #Anti-Skid Cover Cut off max. 20m 180 g/m 12-114 3244.5812 60 Industrial Profile SystemsProfilesCatalog 1816-3/US 61Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAApplicationPanel gasket for installing 6mm panels in 40, 30, 28 and 1.5″ Series profile T-slot.ApplicationPanel gasket for installing 6/8mm panels in T-slots of 32×18 Door Profile. Technical DataPP & TPE, BIack Weight: 90g/mOrdering InformationOrdering InformationDescription Unit Part # Panel Gasket 8 Cut off max. 30.5m 12-106Full Roll 30.5m (ea) 12-106RTechnical DataMolded vinyl (Grey) Weight: 40g/m Description Unit Part # Panel Gasket 10 2m each 12-108 8 Add8mmpersideof panelforT-slotinsertedpanelusingthe12-106.ApplicationMesh gasket for mounting 12 gage wire mesh in 40, 30, 28 and 1.5″ Series T-Slots. Technical DataMolded vinyl (Clear) Weight: 90g/mOrdering InformationDescription Unit Part # Mesh Gasket 8 Cut off max. 30.5m 12-107Full Roll 30.5m (ea) 12-107R Addlengthpersideof panelforT-slotinsertedmeshusingthe12-1 07. 10 for 40 Series7 for 30 Series 6 for 28 Series Profile AccessoriesPanel Gasket 812-106Panel Gasket 1012-108Mesh Gasket 812-107 11 6.5 2 6.5 13 13 14 62Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsProfilesCatalog 1816-3/US 63 ApplicationPrimarily used to cover the T-Slot to prevent dust and debris from building up, or to conceal wiring routed in the T-Slot. These covers can also be inverted and used as a panel gasket. These items are easily cut with tin snips. ApplicationUsed to cover the T-Slot to prevent dust and debris from building up, or to conceal wiring routed in the T-Slot. Technical Data 12-101, 12-103, 12-115: Polypropylene, See ordering for colors 12-113: Rigid PVC, Yellow 12-117-3/6: TPE, BlackWeight: 12-101 52 g/m 12-103 44 g/m 12-113 100 g/m 12-115 27 g/m 12-117-3 70 g/m 12-117-6 31 g/mOrdering Information Part # Part # Part # Part #Description Unit (Clear) (Black) (Yellow) (Gray)Cover/Gasket Strip 40/1.5″ Series Each at 2m 12-101 12-101B 12-101Y 12-101GCover/Gasket Strip 28 Series Each at 2m 12-103B Cover/Gasket Strip 20 Series Each at 2m 12-115 12-115BSafety Cover Strip 40/1.5″ Series Each at 2m 12-113 Push-in Panel Seal (3mm) Each at 100m 12-117-3Push-in Panel Seal (6mm) Each at 100m 12-117-6 Ordering Information Part # Part # Part # Part # Description Unit (Clear) (Black) (Yellow) (Blue)Aluminum Cover Strip 40/1.5″ Series Each at 2m 12-102 PVC Cover Strip 40/1.5″ Series Each at 2m 12-111 12-111B 12-111Y 12-111BLPVC Cover Strip 30/28 Series Each at 2m 12-116 12-116BTechnical DataAluminum, Anodized Colors: ClearPVC Colors: Clear, Black, Yellow, or Blue •T-slotcoveringcanbecuteasilywithtinsnips.•WiresandcablescanbeconcealedinT-slotwithuseofT-slotcover.A B SeriesA (mm)B (mm)40/30/1.5″610284-672026Profile Accessories12-101Cover/Gasket StripsCover Strips12-111 12-11612-115 6.3 6.3 4.1 9.6 5.19.5 3.8 8.8 11.58.812-117-3 12-117-612-103B 8.88.212-102 1.33″ 12-113 18 12 14.6 6.6 62 Industrial Profile SystemsProfilesCatalog 1816-3/US 63Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAApplicationCaps are used to cover the exposed ends of profiles after assembly. The caps provide both protection from potentially sharp edges, and also an aesthetically pleasing appearance. Technical DataGlass-Filled Nylon (Black) SeriesDescription (B x A)UnitWt (g)Part #40 Series40x16Each418-81140x40Each718-81340×40 Heavy SquareEach1018-80540×40 Quarter RoundEach518-84380x16Each618-81280x40Each1518-81480x80Each2818-815120x40Each2218-840120x80Each4318-841160x16Each1018-806160x28Each2018-816160x40Each2818-817160x80Each6618-81840×40-45oEach618-82040-45oEach418-845R40/80-30Each1718-883R40/80-45Each1918-885R40/80-60Each2218-88630 Series30 x 30 Quarter RoundEach418-83830x30Each518-80360x30Each1118-86328 Series28x28Each418-80828x56Each818-80928×28-45oEach318-84420 Series20x10Each0.518-83020x20Each118-80220x40Each218-83140×40, 20 SeriesEach418-832Specialty Profiles56x56 (Post Profile)Each1618-81932×18 Door ProfileEach318-807Access Hole Plugs7mm PlasticEach0.118-7107mm NickelEach0.518-713Ordering Information B A Metric End CapsAccess Hole Plugs B A 40mm B A 45° A B B A 4 13Profile Accessories 64Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsProfilesCatalog 1816-3/US 65 Ordering Information SeriesSize (B x A)UnitWeightPart #1.5″ Series1.5″ x 1.5″Each0.25 oz18-15151.5″ x 1.5″ Quarter RoundEach0.21 oz18-15433″ x 1.5″”Each0.5 oz18-15303″ x 3″Each1 oz18-30301″ Series1″ x 1″Each0.12 oz18-10102″ x 1″Each0.25 oz18-10202″ x 2″Each0.49 oz18-2020Access Hole Plugs9/32″ PlasticEach0.04 oz18-7109/32″ Nickel Plated SteelEach0.18 oz18-713Assembly Hint Press end cap into end hole(s), then lightly tap with rubber or plastic mallet. Profile Accessories 0.19″ 0.50″ 0.13″ 0.42″ 1.5″Series1″Series Inch End CapsAccess Hole Plug B A R1.50″ A B B A B A 64 Industrial Profile SystemsProfilesCatalog 1816-3/US 65Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USANotesSecure End Caps 18-91318-916 Ordering InformationDescription Unit Weight Part # w/Studs Screws28x28 – Secure Each 7g 18-911*28×56 – Secure Each 7g 18-912*30×30 – Secure Each 7g 18-919** (1) 24-21 2-460×30 – Secure Each 7g 18-920** (2) 24-21 2-440×40 – Secure Each 7g 18-913* 18-916** (1) 24-21 2-480×40 – Secure Each 23g 18-914* 18-917** (2) 24-21 2-480×80 – Secure Each 26g 18-918* 18-915** (4) 24-21 2-4Push-in Fastener Each 2 18-715 * Requires push-in-fastener** Requires screwsApplicationSecured End Caps are attached to profile end with push-in fastener (sold separately). No profile servicing is required.Technical DataGlass-Filled Nylon (Black)Screw: St, black oxide 66Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsProfilesCatalog 1816-3/US 67 Notes 66 Industrial Profile SystemsProfilesCatalog 1816-3/US 67Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAModular DimensionsAssembly ofConduit ElementsConduit Elements The conduit is made up of high tensile strength aluminum elements:• Wall duct profile 40, 80 and 120• Conduit support profile 40, 80, 120 and 160 (with or without T-slot)Wall duct profiles of any required length are snapped into a support profile. Another support profile closes the duct with a “snap in” fit. The conduit may be secured with screws where necessary.1 Scored groove for locating locking screw (24-695) in Support Profile.2 Locking screw turned into the pre-extruded threads of the support wall profiles. 12Conduit profiles provide a convenient way to integrate cable, hose and control components to an IPS structural assembly or linear system.These anodized aluminum profiles are modular and provide great flexibility and are easy to assemble. The dimensions are based on 40mm increments and are compatible with all standard IPS elements. Assembled conduit sections may be attached to any IPS profile using standard T-slot fastening methods. Reference grooves allow for accurate positioning of any necessary holes or machining.IPS conduit profiles offer snap-together assembly that can be secured with optional locking screws. 1204016040 typ8040 Conduit Elements 68Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsProfilesCatalog 1816-3/US 69 Dimensions Wall Support Support Area Area Type Item # H x W [mm] Qty Part# Qty Part #1 Qty Part #2 [cm2] [inch2] 1 40×40 2 15-042 2 15-040 — — 16.00 2.48 2 40×80 2 15-042 2 15-080 — — 32.00 4.96 3 40×120 2 15-042 2 15-120 — — 48.00 7.44 4 40×160 2 15-042 2 15-160 — — 64.00 9.92 5 80×40 2 15-082 2 15-040 — — 32.00 4.96 6 80×80 2 15-082 2 15-080 — — 64.00 9.92 7 80×120 2 15-082 2 15-120 — — 96.00 14.88 8 80×160 2 15-082 2 15-160 — — 128.00 19.84 9 120×40 2 15-122 2 15-040 — — 48.00 7.44 10 120×80 2 15-122 2 15-080 — — 96.00 14.88 11 120×120 2 15-122 2 15-120 — — 144.00 22.32 12 120×160 2 15-122 2 15-160 — — 192.00 29.76 13 40×40 2 15-042 1 15-040 1 15-041 9.20 1.43 14 40×160 2 15-042 1 15-160 1 15-161 36.80 5.70 15 80×40 2 15-082 1 15-040 1 15-041 25.20 3.91 16 80×160 2 15-082 1 15-160 1 15-161 100.80 15.62 17 120×40 2 15-122 1 15-040 1 15-041 41.20 6.39 18 120×160 2 15-122 1 15-160 1 15-161 164.80 25.54 19 80×160 2 15-082 2 15-161 — — 73.60 11.41 20 120×160 2 15-122 2 15-161 — — 137.60 21.33 21 40×160 5 15-042 1 15-160 1 15-041 36.80 5.70 22 80×160 5 15-082 1 15-160 1 15-161 100.80 15.62 23 160×160 5 15-122 1 15-160 1 15-161 164.80 25.54Conduits with T-Slots on Both SidesConduits with PartitionsConduits With T-Slots on one Side Conduits Without T-Slots Conduit Cross Section GuideConduit Elements 68 Industrial Profile SystemsProfilesCatalog 1816-3/US 69Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Conduits without T-slots1 40×402 40×803 40×1204 40×1605 80×406 80×807 80×1208 80×1609 120×4010 120×8011 120×12012 120x160Conduits with T-slots on one side13 40×4014 40×16015 80×4016 80×16017 120×4018 120x160Conduits with T-slots on both sides19 80×16020 120x160Conduits with Partitions21 40×16022 80×16023 160x160Cross Sections1417161819201592346781011121315212223 Conduit Elements 70Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsProfilesCatalog 1816-3/US 71 ApplicationBottom or cover components for conduit assemblies. Wall Duct profiles snap in for fast applications. Locking screw (24-695) can be added to secure the assembly and provide ground continuity between profiles members. Ordering InformationDescription Unit Part # Conduit Support 40 4m each 15-040 Conduit Support 80 4m each 15-080 *Saw Cut Needed for Cut to Length 19-001 Conduit Support 120 4m each 15-120 Conduit Support 160 4m each 15-160 *Saw Cut Needed for Cut to Length 19-002 Sold in full pieces only.Technical DataAluminum, Clear Anodized Weight kg/pc 15-040 1.96 15-080 3.04 15-120 3.92 15-160 5.00ApplicationBottom or cover components for conduit assemblies with 40 Series T-Slots on external face for mounting with standard hardware. Wall Duct Profiles can be used to create partitions. Ordering InformationDescription Unit Part # Conduit Support 40 W/ T-Slot 4m each 15-041 *Saw Cut Needed for Cut to Length 19-001Conduit Support 160 W/T-Slot 4m each 15-161 *Saw Cut Needed for Cut to Length 19-002Sold in full pieces only. Technical DataAluminum, Clear Anodized Weight kg/pc 15-041 2.40 15-161 9.16 Conduit ProfilesConduit Support Conduit Support with T-Slot15-040 15-160 15-120 402.515 1580 15120 15160 15-08015-041 15-161 1740 80171201716017 1740801712017 160 17 70 Industrial Profile SystemsProfilesCatalog 1816-3/US 71Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAApplicationThis profile creates the sides of the conduit assembly and can be used to create partitioned spaces within assemblies using T-Sloted top and bottom supports. Technical DataAluminum, Clear AnodizedWeight kg/pc 15-042 0.84 15-082 2.20 15-122 3.24Ordering InformationDescription Unit Part # Conduit Wall Duct 40 4m each 15-042 Conduit Wall Duct 80 4m each 15-082 Conduit Wall Duct 120 4m each 15-122 *Saw Cut Needed for Cut to Length 19-001Sold in full pieces only. Wall Duct Profiles15-082 15-12215-042 34 74 114Conduit Profiles 72Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsProfilesCatalog 1816-3/US 73 Conduit End Caps 6.56.5AB4ApplicationEnd CapsFace covering for sealing the end openings of conduit assemblies. Not for use on 40 Series profiles.Locking ScrewSecurely fastens support and wall profiles and breaks the anodized coating creating a positive ground between profile members. Technical DataEnd Caps Glass-filled nylon, Black Locking Screw Steel, Galvanized 4.2 x 9.5mm, DIN 7971 Ordering InformationDescription [AxB] Unit Part # Weight Conduit Cap 40×40 1 pc 15-803 8gConduit Cap 40×80 1 pc 15-804 14gConduit Cap 40×120 1 pc 15-810 30gConduit Cap 40×160 1 pc 15-806 30gConduit Cap 80×80 1 pc 15-805 30gConduit Cap 80×120 1 pc 15-811 50gConduit Cap 80×160 1 pc 15-807 58gConduit Cap 120×120 1 pc 15-812 70gConduit Cap 120×160 1 pc 15-813 90gLocking Screw 4.2 x 9.5 1 pc 24-695 2g Indented for Locking Screw[24-695]Tabs fortight fitting 57 Recommended location of 5mm hole for locking screw on custom conduit caps (note orientation).Conduit Profiles 72 Industrial Profile SystemsFastenersCatalog 1816-3/US 73Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAContents Standard Fasteners 76Flat Plate Fasteners 77Butt-Fastening Sets 77Universal Fasteners 78Milling Connectors 79Central Connector 79Self-Tapping 80Profile-to-Wall 80Miter Connectors 81 T-Nuts 83Double T-Nuts 84Self-Aligning T-Nuts 84T-Slot Bars 85Heavy Duty T-Nuts 85Heavy Duty T-Slot Bars 85Economy T-Nuts 86Drop-in Economy 87T-Nut Zn 87Anodize Breaker 88T-Bolts 88Nuts 89Washers 89Metric Screws 90-91Imperial Screws 92-93Set Screws 94Clip Nuts 94High Cycle Nut 94T-Clips 95Cable Tie Holders 95Cable/Hose Holders 96 Section 2Fasteners 74Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsFastenersCatalog 1816-3/US 75 Fastener OverviewTwo pieces of 40×40 Heavy profile were assembled to form a tee with a standard fastener and a button head screw. Force was applied until the tee started to separate. The profile failed before the fastener. The profiles were still held together at the end of the test. There were no catastrophic failures. Extra screw length beyond standard 18mm did not significantly change test results.Pull Test Safe Load Engaged Force (F) Screw Length N LbsM8x18 10.8 mm 27,250 6,126M8x20 12.8 mm 26,761 6,016 M8x25 17.8 mm 25,350 5,699M8x30 22.8 mm 26,774 6,019 40 Series Standardwith T-slot Nut2,500 N(560 lbs)40 Series Heavywith T-slot Nut5,000 N(1,125 lbs)40 Series Heavywith T-Nut HD8,000 N(1,800 lbs) 40 Series Lightwith T-slot Nut1,800 N(400 lbs) 74 Industrial Profile SystemsFastenersCatalog 1816-3/US 75Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAFastener Overview Fastener TypeHardware40 Series30 Series28 Series20 Series1.5″ Series1″ SeriesStandard FastenerM520-021M820-00220-00320-00320-002M8 SS20-002SS20-003SS20-003SS20-002SS1/4-2025-0225/16-1825-00325-0035/16-18 SS25-003SS25-003SSStandard Fastener Single TabM820-14420-1445/16-1825-01425-014Universal FastenerM620-00820-005M820-004(1)20-0041/4-2025-0235/16-18 25-00425-004Flat PlateM8x1620-02820-028M8x1020-028Z120-028Z15/16-18 25-02825-028Butt FastenerM8x4520-006(2)20-01220-01220-0061/4-20 25-0175/16-1825-01625-016Milling ConnectorM528-00428-005Central ConnectorM620-70420-705Profile-to-WallM820-01520-0155/16-1825-01525-015Self-Tapping 20-019Miter ConnectorVariable HD20-02225-02490o Fixed20-12820-12825-026(1) Use 20-011 for 40 Series Pneumatic Applications(2) Use 20-012 for 40 Series Pneumatic Applications Fastener Quick Reference 76Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsFastenersCatalog 1816-3/US 77 Fastening SetsStandard AB E F D C HEX ThreadDepthG AccessHoleØL H K ØL SeriesGH*KL401640207301630157281628147201020104.31.5″0.75″1.5″0.75″0.281″1″0.625″1″0.5″0.219″*All dimensions in mm unless otherwise noted. H dimension is required when using multiple T-slot profiles.ApplicationThis is the primary fastening method used to join two pieces of profiles together. The fastener couples with the taper in the T-Slots to create an extremely rigid joint. The tabs on the fastener align the profiles and provide anti-rotational support.Technical DataPlate Std – Steel, Zinc Plated SS – Stainless Steel SAE – Steel, Zinc Plated w/ SAE hardwareNote: You must use 20-028 Flat Standard Fastener or 20-144/25-014 Single Tab Standard Fastener set on closed face profiles. ProfileSeriesTypeDimensionsTorqueNm (in-lb)Weight (g)Part #*AHexBCDEF40StdM8x18*5367.817112.925 (220)2520-002SSM8x18*5367.817112.920 (180)2120-002SSSAE5/16-18 x 3/4″3/16″367.817112.325 (220)2525-003SAE SS5/16-18 x 3/4″3/16″367.817112.325 (220)2525-003SSS End5/16-18 x 3/4″3/16″277.614132.325 (220)2125-014S EndM8x185277.817112.325 (220)2120-144Flat StdM8x18527—1711225 (220)4120-028SAE Flat5/16-18 x 5/8″3/16″27—1711225 (220)2125-02830/28StdM8x18523.77.8168.91.925 (220)1520-003SSM8x18523.77.8168.91.920 (180)1420-003SSS EndM8x185217.8148.91.925 (220)1520-14320StdM5x1234.84.8104.51.14.5 (40)520-0211.5″Std5/16-18 x 3/4″3/16″1.42″0.307″0.669″0.433″0.114″25 (220)2525-003SS5/16-18 x 3/4″3/16″1.42″0.307″0.669″0.433″0.114″25 (220)2525-003SSS End5/16-18 x 3/4″3/16″1.05″0.300″0.550″0.510″0.090″25 (220)2125-014Flat5/16-18 x 3/4″3/16″1.30″0.307″0.669″0.433″0.090″25 (220)2125-0281″Std1/4-20 x 5/8″5/32″0.7950.2500.5200.3000.06020 (180)1325-022*Fastening plates may be ordered without a screw by adding “Z1” to part number, i.e. 20-002Z1.Ordering Information AHEXEBFDC 76 Industrial Profile SystemsFastenersCatalog 1816-3/US 77Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAFastenersFlat Plate 1 2 OrderAppropriateSizeT-NutSeparately AccessHoleØ.281″ DrillAppropriateAccessHole D C E B A HEX20-02825-028ApplicationThis fastening set is suitable for connecting two profiles at 90o when a standard fastener cannot be used. It can also be used to connect two profiles where no end hole is available (see detail 2).Technical DataPlate: Steel, Zinc Plated Profile SeriesAHEXBCDETorqueNm (in-lb)Wgt.Part #40M8 x 18582717.5225 (220)13 g20-0281.5″5/16-18 x 5/8″3/16″0.31″1.06″0.677″0.075″25 (220)13 g25-028Butt-Fastening B 20-00620-01225-01625-017 A HEX ApplicationFor joining profiles end to end. Fastening dimensions and servicing are the same as corresponding universal fasteners.For 40 Series pneumatic applications use M6 fastener (20-012). See page 178.Technical DataPlate: Zinc Cast, galvanizedRequires service part #19-015. Profile Dimensions (mm) Torque, Series A HEX B Nm (lb-in) Weight Part # 40 M8 x 45 6 60 25 (220) 59 g 20-006 30 & 28 M6 x 50 & M6 Nut 5 60 14 (125) 45 g 20-012 1.5″ 5/16-18 x 1¾” 3/16″ 2.41″ 25 (220) 59 g 25-016 1″ 1/4-20 x 7/8″ 5/32″ 1.55″ 13.5 (120) 40 g 25-017 * All fastener dimensions and servicing dimensions for butt-fasteners are the same as the corresponding universal fastener.For 28 Series order: Flat Plate Only 20-028Z1M8x10 BHCS Screw 24-110-8 Ordering InformationOrdering Information 78Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsFastenersCatalog 1816-3/US 79 Fastener Sets SeriesA (SHCS)HexBCDETorque Nm (in-lb)Wt. (g)Part #40,1.5″M8x3061682033.825 (220)41 20-0045/16-18 x 1¼” 3/16″1682033.825 (220)41 25-00428M6x2751182031.314 (125)30 20-00528 to 40M6x3051182033.514 (125)36 20-01130M6x2751182031.314 (125)31 20-0081″1/4-20 x ¾”5/32″10.76.41421.513 (120)2525-023Universal Zinc Casting 40 (40 Series without T-Nut or Screw)20-004Z1Universal Zinc Casting 28 (28 Series without T-Nut or Screw)20-005Z1* Fastening plates may be ordered without a screw by adding “Z1” to the part number, i.e. 20-004Z1 Universal 20-011 28SeriesProfile 40SeriesProfileØF G H A HEX ØD E C B ApplicationFor adjustable 90o profile connections. Ideal for retrofits and additions to existing frames.Fastening set 20-011 is used to connect 28 Series to 40 Series profiles and for pneumatic applications. See page 178.Fastening set 25-015 is used for connecting 1.5″ Series to other parts without T-slots. (See page 108 for corner element examples.)Technical DataZinc Cast, galvanizedIncludes screw and T-NutRequires service part #19-015. SeriesFGH4020201630202011282020111.5″0.813″0.813″0.625″1″0.563″0.500″0.430″Ordering Information 78 Industrial Profile SystemsFastenersCatalog 1816-3/US 79Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAFastener SetsMilling ConnectorCentral ConnectorApplicationFor adjustable 90° profile connections. Central Connectors allow the connection of two profiles. A step drill operation (19-015) is required to one of the profiles in addition to an end drill (19-014) to accommodate the barrel and tightening screw.Ordering InformationDescription Unit Weight Part #Hammer Perpendicular to Barrel Each 49 g 20-704Hammer Parallel to Barrel Each 49 g 20-70520-70520-704 57.5 38.0 A B 28-00428-005 ApplicationFor adjustable 90° profile connections. Milling Connectors allow the connection of two profiles without additional machining.Technical DataPlate: Steel, Zinc Plated Includes screw and T-nut.Ordering Information Profile SeriesABWeight (g)Part #40, 1.5″186.837.328-00430166.331.728-005 19.0 5.5 52.0 15.0 6.0 7.8 11.3 20-704 20-705 ∅11.50 50.00 15.00 32.00 32.5 ∅ Technical DataPlate: Steel, Zinc PlatedRequires services 19-014 and 19-015. See detail above. 80Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsFastenersCatalog 1816-3/US 81 Fasteners 30.0 ∅20.0 8.0 16.0 20-019ApplicationFor right angle attachment of 40 and 1.5″ Series Profiles. No servicing is required making it ideal for retrofitting existing structures. Self Tapping ConnectorTechnical DataSteel Torque: 14 Nm (125 in-lb) Threads – Left HandedOrdering InformationDescription Unit Weight Part #Self Tapping Connector 40/1.5″ 1 Set 34 g 20-019 ApplicationDesigned for connecting 40 and 1.5″ Series profiles to parts without T-Slots such as corner elements or reversing units. Technical DataPlate: Steel, Zinc PlatedRequires service part #19-015.Ordering InformationProfile to Wall Fastening Set20-015 Profile Dimensions Torque Weight Series A HEX B C D E Nm (in-lb) (g) Part # 40 M8x30 SHCS 6 16 8 20 30 25 (220) 32 20-015 1.5″ 5/16-18 x 1¼” 3/16″ 0.630″ 0.315″ 0.787″ 1.18″ 20 (180) 32 25-015 Profile to wall casting without screw or washer 20-015Z1 1 Insert screw into T-slot2 Install fastener3 Insert T-nut and attach connector Profile-to-WallUniversal Fastener2 x [20-015]Corner Element 1Tap M82 x [19-010]7mm Access Hole2 x [19-011] M6 x 40 SHCS[24-340-6] Hex 6 M6T-Nut[20-056] 12.0 32.0 80 Industrial Profile SystemsFastenersCatalog 1816-3/US 81Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAConnectorsApplicationVariable angle connectors are available for 40 and 1.5″ series profiles.Fixed 90° connectors are available for 28, 30 and 1″ Series Profiles. Miter Bracket (20-127) prevents twisting.Not for use as a structural fastener. Secure with joining plates as necessary. Ordering Information SeriesDescriptionABCUnitWeightPart #40Variable45329.53 1 Set67 g20-02228,30Fixed 90°3723.46.571 Set31 g20-128*1.5″Variable1.77″1.260″0.375″1 Set67 g25-0241″Fixed 90°1.46″0.92″0.26″1 Set31 g25-026AllMiter BracketSee drawing1 Pc4 g20-127*Fixed 90° Miter Connector only 1 Pc 20-128Z1Technical DataConnector: Steel, Zinc PlatedMiter Bracket: Aluminum, AnodizedSets include necessary T-nuts and cone point screws. Loctite® Thread Locker No. 262 is recommended to secure set screws.Miter Connectors MiterConnector[20-022]40SeriesJoiningPlate[20-109]DoubleT-Nuts[20-050]M8x18BHCS[24-118-8]DependingontheangleyoumaynotbeabletouseaT-nut in this location.20-02225-02420-12825-02620-127 1025.425.41.6 10 25.4 25.4 1.6 ØC A B MIN60( )° α 90° B ØCA A B Ø E C ØD β40 Seriesb = 90° – a/2A = 45 + C tan bB = 35 + C tan bD = 9.6E = 828 Seriesb = 90° – a/2A = 38 + C tan bB = 25.5 + C tan bD = 6.8E = 61.5″ Seriesb = 90° – a/2A = 1.77″ + C tan bB = 1.38″ + C tan bD = 0.386″E = 0.313″1″ Seriesb = 90° – a/2A = 1.50″ + C tan bB = 1.00″ + C tan bD = 0.266″E = 0.250″ 82Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsFastenersCatalog 1816-3/US 83 T-Nuts TypeThread Size40 Series30 Series28 Series20 Series1.5″ Series1″ SeriesStandard T-Nut M4 20-051 20-04420-051M520-05220-052 20-04520-052M620-056 (SS)20-056 (SS)20-055 20-056 (SS)M820-058 (SS)20-058 (SS)20-057 20-058 (SS)#10-3225-00925-00925-00925-0301/4-2025-00125-00125-05525-00125-031 5/16-1825-00225-00225-05725-002Double T-Nut Standard M820-049 (1)20-049 (1) 20-049M820-050 (2)20-050 (2)20-050M8 HD20-063 (3)20-063 (3)5/16-1825-041 25-041Self Aligning T- NutM520-06520-065 (4)20-065 (4)20-065M620-06620-066 (4)20-066 (4) 20-066M820-06820-068 (4)20-068 (4) 20-068Heavy Duty T-Nut Ret. Spring 20-0614 (3)M520-06720-067M620-060 (3) 20-060 (3)M820-064 (3) 20-064 (3)1/4-2025-05025-0505/16-1825-05125-051Double HeavyDuty T-NutM820-06320-0631/4-2025-05225-0525/16-1825-05325-053Economy Standard T-NutM5 20-085M620-08020-090 (SS)20-090 (SS) 20-080M820-08120-09120-091 20-081#10-3220-08820-08820-0881/4-2020-08320-09320-093 20-08325-0345/16-1820-08220-09220-09220-082#10-24 20-086Economy OffsetT-NutM6 20-19020-190M820-181 #8-3225-04525-04525-0451/4-2020-193 20-19320-19320-1935/16-1820-182 20-182Double Economy T-Nut1/4-2025-0485/16-1825-046 (5) 25-047 (6)25-046 (5)25-047 (6)T-Slot Nut ZnM320-03320-03620-03620-033M420-03420-03720-03720-034M520-03520-03820-03820-035Quick Reference(1) 24mm hole centerline spacing (2) 40 mm hole centerline spacing (3) 40/1.5″ Series only, nut must be installed from profile end(4) On 30 and 28 Series, nut must be installed from profile end (5) 7/8″ hole spacing(6) 1″ hole spacing 82 Industrial Profile SystemsFastenersCatalog 1816-3/US 83Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAT-NutsT-Nuts St D C B E A Standard T-nuts conveniently roll into profile T-slots at any location. The spring/ball locking feature keeps the T-nut in place in vertical applications.ApplicationStandard mounting elements for profiles. The T-Nut can be inserted into profile T-Slots at any location to provide an instant threaded hole for mounting accessories or connectors. Profile Dimensions (mm) Weight Color Series A B C D E (g) Part # 40, 30, M4 7.3 13.8 23 7.5 11 C 20-051 1.5″ M5 7.3 13.8 23 7.5 11 C 20-052 M6 7.3 13.8 23 5.5 11 C 20-056 M6 SS 7.3 13.8 23 6.5 11 C 20-056SS M8 7.3 13.8 23 7.5 10 C 20-058 M8 SS 7.3 13.8 23 6.5 11 C 20-058SS 1/4-20 7.3 13.8 23 7.5 10 B 25-001 5/16″-18 7.3 13.8 23 7.5 9 C 25-002 #10-32 7.3 13.8 23 7.5 10 C 25-009 28 M6 6 13.8 23 7 10 C 20-055 M8 6 13.8 23 7 10 C 20-057 1/4-20 6 12.9 23 7 10 B 25-055 5/16-18 6 12.9 23 7 10 B 25-057 20 M4 4 8 23 4 1 C 20-044 M5 4 8 11.5 4 1 C 20-045 1″ #10-32 0.200″ 0.400″ 0.625″ 0.210″ 0.21″ B 25-030 1/4-20 0.200″ 0.400″ 0.625″ 0.210″ 0.21″ B 25-031 Technical DataSteel, Black Zinc Plated or clear color varies.Parts designated with “SS” are stainless steel. Others may be available in stainless. Contact factory for availability.Ordering Information 84Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsFastenersCatalog 1816-3/US 85 T-NutsDouble StApplicationStandard mounting element where fastening hardware requires two T-Nuts. Profile Dimensions Weight Series A B C D E F (g) Part # 40, 30, M8 7.3 13.8 38 7 24 15 20-049 1.5″ M8 7.3 13.8 55 7.5 40 23 20-050 5/16-18 0.287″ 0.543″ 2.165″ 0.333″ 1.50″ 23 25-041 Technical DataMetric T-Nuts: Steel, Clear Zinc Plated Imperial T-Nuts: Steel, Black Zinc PlatedOrdering Information 40SeriesGussetBracket[20-103]DoubleT-Nut[20-050]M8x18BHCS[24-118-8]40SeriesDoubleT-Nut[20-050]M8x18BHCS[24-118-8]JoiningPlate[20-109]M8T-Nut[20-058] BADCFE B AD C F E D0.8EBAC ApplicationRolls into the T-Slot of 40 and 1.5″ Series profiles at any location and held into position using a spring-loaded ball. The raised area fits into the T-Slot to prevent twisting. Should not be used where the raised area might interfere with other accessories such as tabs on universal fasteners, hinges, etc. Self Aligning T-NutTechnical DataSteel, Zinc PlatedFits 30 and 28 Series profiles but must be inserted from profile end. Profile Dimensions (mm) Weight Series A B C D E (g) Part # 40, 30* M5 6.4 13.5 22 64 10 20-065 28* & M6 6.4 13.5 22 6.4 10 20-066 1.5″ M8 6.4 13.5 22 6.4 10 20-068*Fits 30 and 28 Series profiles but must be inserted from profile end. D0.8EBAC 20-06620-068Ordering Information D 0.8 E B A C 84 Industrial Profile SystemsFastenersCatalog 1816-3/US 85Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAT-NutsApplicationHeavy duty T-Slot Nut for 40 and 1.5″ Series profiles. Recommended for mounting Roller Bearing Units. Technical DataSteel Zinc PlatedOrdering InformationSingle & Double HD Heavy duty T-nuts must be inserted from the ends and slid to the desired location. StyleDimensionsWt.(g)Part #ABCDEFGHSingleM522168.87.93.5——1320-067M620168.87.93.5——13 20-060M820168.87.93.5——13 20-0641/4-200.75″0.63″0.35″0.31″0.14″——1425-0505/16-180.75″0.63″0.35″0.31″0.14″——1325-051Retainer Spring for HD Single T-Slot Nuts20-0614DoubleM838168.87.93.562425 20-0631/4-201.50″0.63″0.35″0.31″0.14″0.25″1.00″2825-0525/16-182.00″0.63″0.35″0.31″0.14″0.25″1.50″3225-053 Retainer Springin Place[20-0614]HDT-Nut F C D E B A B E H C D F G ASingleDoubleT-Slot Bars ApplicationBar stock for custom length T-Nuts. Can be cut to length and tapped. Sold Each Length 500mm.Technical Data20-059 & 20-062Steel – Max. tap hole: M8 (5/16″)Ordering InformationSeries Description Unit Weight Part #40, 30 T-Slot Bar HD Each 0.42 kg 20-062and 1.5″ T-Slot Bar St Each 0.26 kg 20-059 7.9 16 8.5 3.5 13.8 7.3 20-06220-059 86Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsFastenersCatalog 1816-3/US 87 T-Nuts Profile SeriesDimensions (mm or inch)Weight(g)Part #ABCDE40, 1.5″M625163.6–10 20-080M825163.6–10 20-081#10-3222.5112.4–520-0881/4-2025163.6–10 20-0835/16-1825163.6–10 20-08230, 28M620.5133.2–5 20-090M620.5133.2–5 20-090SSM820.5133.2–5 20-0911/4-2020.5133.2–5 20-0935/16-1820.5133.2–5 20-09220#10-24169.62.4–5 20-086M5169.62.4–5 20-0851″#10-320.885″0.440″0.09″–520-0881/4-201.00″0.440″0.09″–520-03440, 1.5″M825163.67.110 20-181#8-3216112.44.8525-0451/4-2020.5133.26.45 20-1935/16-1825163.67.110 20-18230, 28M620.5133.26.45 20-1901/4-2020.5133.26.45 20-1931″#8-320.885″0.440″0.09″0.19″525-045Description Weight Part #Compression Spring for Economy T-Slot Nuts M6 4 g 24-719-6*Compression Spring for Economy T-Slot Nuts M8 4 g 24-719-8**Minimum order quantity = 100 piecesEconomy A B C D C B E D A StandardOffset Economy T-nuts must be inserted from the ends of the profiles and slid to the desired location. A compression spring can be added to help keep the T-nut in location.ApplicationEconomical solution for fastening hardware or components to T-Slots. Economy T-Nuts slide into profile from the end to provide threaded hole for fastening. Available in standard or offset versions. StandardOffsetOrdering Information Compression Spring[24-719-6] or [24-719-8]EconomyT-NutSize M6 or M8 Technical DataMetric T-Nuts: Steel, Clear Zinc Plated Imperial T-Nuts: Steel, Black Zinc PlatedParts designated with “SS” are stainless steel. 86 Industrial Profile SystemsFastenersCatalog 1816-3/US 87Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAT-Nuts25-04625-04725-048 Economy 1.5″Series 1.5″UniversalTop&Bottom[25-004] DoubleT-Nut[25-047] ApplicationUniversal mounting element that wedges into the profile when tightened. Can be inserted into the T-Slot at any position. T-Nut ZnTechnical DataZn Cast, GalvanizedOrdering Information Profile Dimensions (mm) Weight Series A B C D E (g) Part # M3 22 11 8 7.7 5 20-033 40/1.5″ M4 22 11 8 7.7 5 20-034 M5 22 11 8 7.7 5 20-035 M3 22 11 8 6 5 20-036 30, 28 M4 22 11 8 6 5 20-037 M5 22 11 8 6 5 20-038 Double EconomyApplicationDouble Economy T-Nuts are an economical solution for fastening accessories, double universal fasteners and the primary T-Nut to a cross connection.Technical DataSteel, Black Zinc Plated Ordering Information Profile SeriesDimensionsWeightPart #ABCDEF40,1.5″5/16-182.00″0.51″0.12″0.22″0.50″20g25-0461.38″0.51″0.12″0.25″0.88″13 g25-0471/4-201.50″0.51″0.12″0.25″1.00″15g25-048 45° A D E B C B C F D E A 88Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsFastenersCatalog 1816-3/US 89 T-NutsApplicationPenetrates anodizing and provides ground continuity between 40, 30 and 1.5″ Series profiles. Technical DataSteel, GalvanizedDog point M6x12 set screw.Anodize Breaker 7.8 13.5 9.7 6.0 20-070 ApplicationThreaded stud with T-Slot head for insertion into T-Slot of 40 and 1.5″ Series profiles. These will only fit in the standard profile.Technical DataSteel, Zinc Plated Ordering InformationDescription (Thread x L) Unit Weight Part #T-Bolt 40, M8x20 Each 1 g 24-420-8T-Bolt 40, M8x25 Each 1 g 24-425-8T-Bolt 40, M8x30 Each 2 g 24-430-8T-Bolt 40, M8x40 Each 2 g 24-440-8T-Bolt 40 5 18 L24-420-824-425-824-430-8 24-440-8 Ordering InformationDescription Unit Weight Part #Anodize Breaker Each 10 g 20-070 88 Industrial Profile SystemsFastenersCatalog 1816-3/US 89Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USABolts, Nuts & WashersApplicationAll profiles.Technical DataSteel, Zinc PlatedOrdering InformationDescription Unit Weight Part #M3 Hex Nut Each 0.3 g 24-706-3 M4 Hex Nut Each 0.5 g 24-706-4 M5 Hex Nut Each 1 g 24-706-5 M6 Hex Nut Each 2.5 g 24-706-6 M8 Hex Nut Each 5 g 24-706-8 M10 Hex Nut Each 11.6 g 24-706-10 M12 Hex Nut Each 17.3 g 24-706-12 M14 Hex Nut Each 25 g 24-706-14 M16 Hex Nut Each 33 g 24-706-16M6 Lock Nut Each 3 g 24-716-6 M8 Lock Nut Each 5 g 24-716-81/4-20 Hex Nut Each 4.5 g 25-706-4 5/16-18 Hex Nut Each 4.5 g 25-706-55/16-18 Lock Nut Each 4.5 g 25-716-55/16-18 Flanged Serrated Nut Each 4.5 g 25-726-5 ApplicationAll profiles.Technical DataSteel, Zinc PlatedOrdering Information Description Unit Weight Part #M4 Flat Washer Each 0.1 g 24-700-4 M5 Flat Washer Each 0.3 g 24-700-5 M6 Flat Washer Each 0.4 g 24-700-6 M8 Flat Washer Each 1 g 24-700-8M6 Lock Washer Each 6 g 24-707-6 M8 Lock Washer Each 9 g 24-707-8 M10 Lock Washer Each 11 g 24-707-10M8 Rib Spring Washer Each 6 g 24-718-8M8 Safety Spring Washer Each 6 g 24-709-8M8 Spring Washer Each 3 g 24-708-8 M10 Spring Washer Each 6 g 24-708-100′ size M8/Flat Washer Each 6 g 24-701-8 5/8″ OD M6 Flat Washer Each 2 g 24-711-6#10-32 Flat Washer Each 2.8 g 25-700-2 1/4″ Flat Washer Each 2.8 g 25-700-4 5/16″ Flat Washer Each 2.8 g 25-700-5 3/8″ Flat Washer Each 2.8 g 25-700-65/16″ Lock Washer Each 2.8 g 25-707-5Lock WasherFlat WasherNuts WashersLock NutHex Nut 24-706-XX24-707-XX24-718-XX24-709-XX24-708-XX24-716-XX24-700-XX24-701-XX 24-706-XX24-707-XX24-718-XX24-709-XX24-708-XX24-716-XX24-700-XX24-701-XX 24-706-XX24-707-XX24-718-XX24-709-XX24-708-XX24-716-XX24-700-XX24-701-XX 24-706-XX24-707-XX24-718-XX24-709-XX24-708-XX24-716-XX24-700-XX24-701-XX 24-706-XX24-707-XX24-718-XX24-709-XX24-708-XX24-716-XX24-700-XX24-701-XX 24-706-XX24-707-XX24-718-XX24-709-XX24-708-XX24-716-XX24-700-XX24-701-XX Rib Spring WasherSpring WasherSafety Spring Washer0′ size M8/Flat WasherFlanged Serrated Nut 90Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsFastenersCatalog 1816-3/US 91 ScrewsMetric Screws Length T S K D Length S K D T Length T K S D SOCKET HEADFLAT HEADBUTTON HEADMETRIC SCREW DIMENSIONS (mm) Thread Button Head Flat Head Socket Head T D* K* S D* K S D* K* S M3 5.7 1.65 2 6 1.7 2 5.5 3 2.5 M4 7.6 2.2 2.5 8 2.3 2.5 7 4 3 M5 9.5 2.75 3 10 2.8 3 8.5 5 4 M6 10.5 3.3 4 12 3.3 4 10 6 5 M8 14 4.4 5 16 4.4 5 13 8 6 M10 17.5 5.5 6 20 5.5 6 16 10 8 *MAX size listed. Thread Type Code M3x.05 3 M4x0.7 4 M5x0.8 5 M6x1.0 6 M8x1.25 8 M10x1.5 10Ordering InformationThe chart on this page is to guide you in determining a part number from a specification. Verify that the part number created is a stocked item by using the chart on the next page or contacting your local representative.Note: Only screw items listed by part number on the following pages are considered standard and are in stock. Non-stock items are special order with minimum quantity requirements. 24-120-5 Part Number ExampleExample would be a Button Head Screw M5x.08 at 20mm Long Screw Type Code Button Head 1 Flat Head 2 Socket Head 3 Length (mm) Code 8 08 10 10 12 12 14 14 16 16 18 18 20 20 22 22 25 25 27 27 28 28 30 30 35 35 40 40 45 45 50 50 60 60 80 80 90 90 100 100 120 120 Order Quantities: Order quantities are per screw. Contact customer service for box quantity and high volume orders.Technical DataFinish will vary between Zinc plated or black oxide depending on style. Stainless Steel is available on selected styles. Check with your local Service Center or current Price List 90 Industrial Profile SystemsFastenersCatalog 1816-3/US 91Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAScrews LengthM3x.05M4x0.7M5x0.8M6x1.0M8x1.25M10x1.5824-108-524-108-61024-110-324-110-4*24-110-5 *24-110-6 *24-110-8 *1224-112-5 *24-112-6 *24-112-8 *1424-114-524-114-624-114-81624-116-5*24-116-6 *24-116-8 *1824-118-8 *2024-120-5 *24-120-6 *24-120-8 *24-120-102524-125-5 *24-125-6 *24-125-8 *24-125-102824-128-83024-130-5 *24-130-6 *24-130-824-130-10 *3524-135-524-135-6 *24-135-8 4024-140-624-140-8 *24-140-104524-145-524-145-85024-150-86024-160-624-160-88024-180-8824-208-424-208-61024-210-324-210-5 24-210-6 *24-210-81224-212-424-212-5 *24-212-6 *24-212-8 *1424-214-4SS24-214-624-214-81624-216-324-216-4 24-216-5 24-216-6 *24-216-8 * 1824-218-624-218-82024-220-424-220-6 *24-220-8 *2524-225-424-225-524-225-6 *24-225-8 3024-230-524-230-624-230-8 *3524-235-6 4524-245-8824-308-41024-310-424-310-624-310-81224-312-324-312-424-312-5 * †24-312-624-312-8 *1424-314-424-314-61624-316-4 *24-316-624-316-8 *1824-318-62024-320-4 24-320-524-320-6 * 24-320-8 *2524-325-6 *24-325-8 *2724-327-63024-330-624-330-8 *3524-335-624-335-84024-340-624-340-8 4524-345-624-345-8 *5024-350-624-350-88024-380-624-380-89024-390-610024-3100-812024-3120-6* These items are available in Stainless Steel. Add “SS” to the end of the Part #.† Low headMetric Screw Quick ReferenceFlat Head ScrewsSocket Head ScrewsButton Head Screws 92Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsFastenersCatalog 1816-3/US 93 ScrewsImperial Screws Length T S K D Length S K D T Length T K S D SOCKET HEADFLAT HEADBUTTON HEADENGLISH SCREW DIMENSIONS (in) Thread Button Head Flat Head Socket Head T D* K* S D* K S D* K* S #8-32 0.312 0.087 3/32 0.311 0.112 3/32 0.270 0.164 9/64 #10-32 0.361 0.101 1/8 0.359 0.127 1/8 0.312 0.190 5/32 1/4-20 0.437 0.132 5/32 0.480 0.161 5.32 0.375 0.250 3/16 5/16-18 0.547 0.166 3/16 0.600 0.198 3/16 0.469 0.312 1/4 3/8-16 0.656 0.199 7/32 0.720 0.234 7/32 0.562 0.375 5/16 1/2-13 0.875 0.265 5/16 0.872 0.251 5/16 0.750 0.500 3/8 *MAX size listed. Thread Type Code #8-32 1 #10-32 2 1/4-20 4 5/16-18 5 3/8-16 6 1/2-13 8Ordering InformationThe charts on this page are to guide you in developing the appropriate part number to order the screw. Verify that the part number created is a stocked item by using the chart on the next page or contacting your local representative.Note: Only screw items listed by part number on the following pages are considered standard and are in stock. Non-stock items are special order with minimum quantity requirements.Order Quantities: Order quantities are per screw. Contact customer service for box quantity and high volume orders. Part Number ExampleExample would be a Button Head Cap Screw 5/16-18 x 3/4″ long. Screw Type Code Button Head 1 Flat Head 2 Socket Head 3 Length (in) Code 1/8 02 3/16 03 1/4 04 5/16 05 3/8 06 7/16 07 1/2 08 9/16 09 5/8 10 11/16 11 3/4 12 13/16 13 7/8 14 15/16 15 1 16 1 1/8 18 1 1/4 20 1 3/8 22 1 1/2 24 1 3/4 28 2 32 Lengths shown in bold are industry standards for all threads.Technical DataThe standard finish on iSeries screws is Black Dicromate. Clear Zinc and stainless steel may be avaliable on select styles. 25-112-5 92 Industrial Profile SystemsFastenersCatalog 1816-3/US 93Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAScrewsImperial Screw Quick Reference TypeLength#8-32#10-321/4-205/16-183/8-16Button Head Screws3/8″25-106-125-106-225-106-425-106-51/2″25-108-125-108-225-108-425-108-55/8″25-110-125-110-225-110-425-110-53/4″25-112-225-112-425-112-5 *7/8″25-114-425-114-51″25-116-51 1/8″25-118-51 1/4″25-120-525-120-61 1/2″25-124-51 3/4″25-128-5Flat Head Screws1/2″25-208-225-208-45/8″25-210-425-210-53/4″25-212-425-212-5Socket Head Screws1/2″25-308-125-308-55/8″25-310-125-310-425-310-5 *3/4″25-312-425-312-57/8″25-314-425-314-51″25-316-425-316-51 1/4″25-320-425-320-51 3/4″25-328-52″25-332-5 * These Items are available as both Black Dicromate Finish and Stainless Steel. Add “SS” to the end of the part # for stainless steel. 94Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsFastenersCatalog 1816-3/US 95 Set Screws, NutsSet Screws (Hexagon Socket)ApplicationAll profiles.Technical DataSteel, Black OxideOrdering InformationType Description Unit Part #Cone Point M5 x 6 Each 24-506-5C M6 x 8 Each 24-508-6C M6 x 10 Each 24-510-6C M6 x 12 Each 24-512-6C M8 x 10 Each 24-510-8C M8 x 16 Each 24-516-8C 1/4-20 x 3/8″ Each 25-506-4C 5/16-18 x 5/8″ Each 25-510-5CDog Point M6 x 12 Each 24-512-6D M8 x 30 Each 24-530-8DFlat Point M5 x 6 Each 24-506-5F M5 x 16 Each 24-516-5F M6 x 6 Each 24-506-6F M6 x 12 Each 24-512-6F M6 x 16 Each 24-516-6F M8 x 10 Each 24-510-8F M10 x 25 Each 24-525-10FCup Point M8 x 8 Each 24-508-8U 1/4-20 x 5/8″ Each 25-510-4U24-5xx-xC24-5xx-xD24-5xx-xF24-508-8U High Cycle Nut #10-321/4-20 20-07520-07625-07525-076Clip Nuts Ordering InformationDescription Unit Weight Part #High Cycle Nut #10-32 Each 0.5 g 25-705-2ApplicationThreaded insert nut used to create high cycle UHMW slide blocks. Technical DataSteel, Zinc PlatedAccepts #10-32 screw.ApplicationSquare nut with clip attachment for 19″ Rack Angle. Nut snaps into square holes for attaching panels and accessories.Technical DataSt., Zinc PlatedWeight 5gOrdering Information Description Unit Weight Part #Clip Nut M5 Each 4.5 g 20-075Clip Nut M6 Each 4.5 g 20-076Clip Nut #10-32 Each 4.5 g 25-075Clip Nut 1/4-20 Each 4.5 g 25-076 #10-32 25-705-2 94 Industrial Profile SystemsFastenersCatalog 1816-3/US 95Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAWiring/Cable AccessoriesApplicationMounting element with two separate channels for fast, easy securing and routing of open wiring or tubing.Technical DataGlass Filled Nylon, BlackComplete with screw and T-nut for 40 Series mounting. Range Dimensions (in) (mm) A B C D E F Part # 6-8 20 12 20 8 9 3 22-206 8-10 25 15 24 10 12 4 22-208 10-13 31 18 28 12 12 4 22-210 13-16 35 21 36 14 17 4 22-212 16-19 44 25 43 17 20 5 22-215 ApplicationMounting element provides point for cable tie mounting. Suitable for use on 40, 30, 28, 1.5″ and 1″ Series profiles. Technical DataGlass Filled Nylon, BlackInsert into T-slot and twist 90°Ordering Information Description Unit Weight Part #Cable Tie Holder, 40/1.5″ Each 4 g 22-202Cable Tie Holder, 28/30 Each 4 g 22-201Cross Cable Tie Holder, 40/1.5″ Each 4 g 27-202Cross Cable Tie Holder, 1″ Each 4 g 27-203Ordering InformationT-Clips B A E C D F 19 19 9.25 4.8 Cable Tie Holder22-20222-20127-20227-203 22.0 10.1 11.0 1.9 96Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsFastenersCatalog 1816-3/US 97 Wiring/Cable Accessories 39 16 20 12 7.9 For#8-32SHCS Cable/Hose Holder22-20022-23022-203 164020 ApplicationMounting element with two separate channels for routing open wiring or tubing along the profile surfaceTechnical DataGlass Filled Nylon, BlackIncludes screw and T-Nut(12mm max dia.)Ordering Information Description Unit Weight Part #Cable/Hose Holder, 40 Series Set 8 g 22-200Cable/Hose Holder, 1.5″ Series Set 8 g 22-230Cable/Hose Holder (Qtr. Turn Style) Set 9 g 22-203 96 Industrial Profile SystemsBrackets, Gussets & PlatesCatalog 1816-3/US 97Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Joining Plates 102-103Angle Brackets 104-105Machined Gussets 106Cast Gussets 107Corner Elements 108Machined Corner Elements 109 9.020.58.738.08.045.00°36.036.05.5 Corner Brackets 98Corner Connectors 99Cross Connector 100Angle Connector 100Mounting Plate 101Clamp Block 101Section 3Brackets, Gussets & Plates Contents 1.50″1.50″1.00″Ø0.27″0.50″0.236″C’sink for5/16″ FHCS 98Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsBrackets, Gussets & PlatesCatalog 1816-3/US 99 Corner BracketApplicationCorner brackets are used for connecting 40,30 and 1.5″ Series profiles at right angles. Ideal for construction of display cases, tables, cover hoods or anywhere a protected corner is desired. Caps are designed to match the contour of the profile. Ordering Information SeriesDescriptionABCUnitWt.Part #40Corner Bracket363620Set120 g22-146Radius Connector Cap4040—Each8 g18-8213×45° Connector Cap4040—Each9 g18-822Square Connector Cap4040—Each15 g18-84230Corner Bracket282815Set69 g22-150Radius Connector Cap3030—Each4 g22-151Square Connector Cap3030—Each7 g22-1521.5″Corner Bracket1.5″1.5″0.75″Set120g22-153Radius Connector Cap1.5″1.5″—Each8 g22-154* For Machining M8 Tap use part number 19-010 for each profile endTechnical DataBracket: Die Cast ZincEnd Cap: Glass-filled Nylon, BlackProfile ends must be tapped for M8 (5/16-18) screws (included with set).18-82122-15122-15418-8222 1 3 4 22-15018-84222-15222-14622-153Corner Elements B C A FOR BHCS B A R40 B A 45° B C A FOR M8 FHCS [24-220-8] B A 98 Industrial Profile SystemsBrackets, Gussets & PlatesCatalog 1816-3/US 99Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Connector Plug 40[18-711]M8 x 20 BHCS[24-125-8]3-Way Corner Connector 403-Way CornerConnector 28Connector Plug 28[18-712]M8x16 FHCS[24-216-8] Corner ConnectorApplicationCorner connectors are ideal for use with closed face profiles. Suitable for clean room environments, they include access plugs to cover hardware.Order all hardware separately Series2-Way3-Way40(2) 24-125-8(3) 24-125-830(2) 24-216-8(3) 24-216-828—(3) 24-216-820 (2) 24-112-5(3) 24-112-51.5″(2) 25-116-5(3) 25-116-51″(2) 25-112-4(3) 25-112-4Technical Data40 SeriesBlock: Die-cast Aluminum, Silver Paint Plug: Nylon28 SeriesBlock: Aluminum, Black Anodized Plug: Acetal (Delrin)20, 1″ and 1.5″ SeriesBlock: Die-cast aluminum, Silver Paint Plug: NylonProfile ends must be tapped for screws. Hardware not included.Ordering Information SeriesDescriptionABCD UnitWeightPart #402-Way404040M8 BHCSSet26 g18-8263-Way404040M8 BHCSSet26 g18-827302-Way303030M8 FHCSSet47 g18-9023-Way303030M8 FHCSSet47 g18-903283-Way282828M8 FHCSSet25 g18-829Access Plug————Each1 g18-712202-Way202020M5 BHCSSet13 g18-8523-Way202020M5 BHCSSet10 g18-8531.5″2-Way1.5″1.5″1.5″5/16-18 BHCSSet105 g18-8923-Way1.5″1.5″1.5″5/16-18 BHCSSet91 g18-8931″2-Way1″1″1″1/4-20 BHCSSet30 g18-8723-Way1″1″1″1/4-20 BHCSSet26 g18-873* For Machining Tap use part number 19-010 for each profile end.18-82618-85218-87218-89218-90218-82718-82918-85318-87318-89318-903Corner ElementsM8 x 2518-82618-829 A B C DA B C D 100Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsBrackets, Gussets & PlatesCatalog 1816-3/US 101 Profile ConnectorsOrdering Information Series Description Unit Weight Part # 40/1.5″ Cross Connector, Double Tab Each 55 g 25-027 40/1.5″ Angle Connector, 45° Each 200 g 27-600* For Machining M8 Tap, use part number 19-010 for each profile end. For machining 5/16-18 Tap, use part number 19-009 for each profile end.Technical Data25-027Zinc Cast, Clear Zinc Plate FinishAll fasteners included. To order plate only, add Z1 at end of part number.27-600Zinc Cast, Clear PaintOrder fasteners separately.Connecting Elements25-027 1.50 ” 1.50″ 1.00″ Ø0.27″ 0.50″ 0.236″ C’sink for5/16″ FHCS ApplicationThe cross connector and angle connector are bracket style connectors that allow you to connect 40 or 1.5″ Series profiles together with minimal servicing. You can cut the profile to length, tap one end of the profile and be able to join two pieces of profile together. Recommended Hardware (Order Separately) Part #SeriesScrewsT-Nut27-60040(2) 24-320-8(2) 24-316-8(2) 20-0581.5″(2) 25-312-5(2) 25-310-5(2) 25-00227-600 52 40 45° 40 ∅9 ∅9 1.5″Series CrossConnector[25-027Z1] 1/4-20X5/8″SHCS[25-310-4] 5/16-18X3/4″FHCS[25-212-5] 1/4-20DoubleT-Nut[25-048] TapEnd5/16-18×3/4″ 100 Industrial Profile SystemsBrackets, Gussets & PlatesCatalog 1816-3/US 101Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAMounting PlateApplicationDesigned to mount 40×16 profile (10-016) at 90O angle to any 40 or 1.5″ Series profile. Technical DataAluminum, Clear AnodizedRequires the following hardware: Screw(1) 24-316-8T-Nut(1) 20-058FHCS(2) 24-216-6Ordering Information Series Description Unit Weight Part # 40 Mounting Plate for 40×16 profile Each 19 g 22-139 Clamp BlockApplicationCost effective connection of 40 Series profiles stacked at intersecting angles. Not recommended for linear applications. Use in pairs to accomplish proper clamping. Ordering Information Series Description Unit Weight Part # 40 Clamp Block 1 (1 hole) Each 0.03 kg 20-018-1 Clamp Block 2 (2 holes) Each 0.90 kg 20-018-2 Clamp Block 4 (4 holes) Each 0.17 kg 20-018-4 40×16 Profile[10-016]M6x16 FHCS[24-216-6] x2Mounting Plate[22-139]40 Series ProfileAny M8 T-NutTap M6x12 Dp x2M8x16 SHCS[24-316-8] Technical DataAluminum, Clear AnodizedRequires the following hardware per hole: ScrewT-Nut(1) 24-130-8(1) 20-064 38.1 40 6.35 ∅9 THRU 8 19 28 FOR M6 FHCS 15 20 20 5 10 30 ∅9 76 40 40 40 40 156 22-13920-018-120-018-220-018-4Mounting Accessories 102Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsBrackets, Gussets & PlatesCatalog 1816-3/US 103 Straight20-11120-11820-302, 20-31220-11220-30320-31320-11720-300, 20-31022-140, 22-145ApplicationExterior joining plates for fastening profiles without servicing. Can also be used for additional strength on joints with fasteners. Ordering Information SeriesABCDEUnitWeightPart #40387640189Each40 g22-1403415440179Each86 g20-108747440179Each90 g20-1117415440179Each188 g20-11230/28255428139Each33 g22-1452510340349Each20 g20-1042019382095.5Each7 g20-11738382095.5Each11 g20-118Technical DataAluminum, Anodized, 40 Series: 6.4mm Thick 30/28 Series: 3.2mm Thick 1.5″ and 1″ Series: 0.25″ Thick 20-104Recommended Fasteners (Order Separately) SeriesScrewsT-NutsDouble T-Nut (if applicable)4024-118-820-05820-0503024-112-820-05820-0502821-110-820-057—2024-108-520-045—1.5″25-110-525-002, 25-082 or 20-18225-041 or 25-0461″25-108-425-031, 25-034 or 25-03625-032 or 25-037Joining Plates SeriesABCDEUnitWeightPart #1.5″1.50″3.00″1.50″0.75″0.34″Each45 g20-3001.50″6.00″1.50″0.75″0.34″Each90 g20-3013.00″3.00″1.50″0.75″0.34″Each95 g20-3023.00″6.00″1.50″0.75″0.34″Each195 g20-3031″1.00″2.00″1.00″0.50″0.28″Each18 g20-3101.00″4.00″1.00″0.50″0.28″Each36 g20-3112.00″2.00″1.00″0.50″0.28″Each36 g20-3122.00″4.00″1.00″0.50″0.28″Each68 g20-313 B A D C 3 ∅E THRU D CTYPAB ∅E 20-10820-301, 20-310 B C D A ∅E BADCTYPØE ABCTYPD ∅ E 102 Industrial Profile SystemsBrackets, Gussets & PlatesCatalog 1816-3/US 103Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USACorner & “T”20-11320-30720-10620-11020-30520-31520-10520-10920-30420-314ApplicationExterior joining plates for fastening profiles without servicing. Can also be used for additional strength on joints with fasteners. Technical DataAluminum, Anodized, 40 Series: 6.4mm Thick 30/28 Series: 3.2mm Thick 1″ and 1.5″ Series: 0.25″ Thick20-11420-306 M8 T-Nut St[20-058]M8x18 BHCS[24-118-8]Corner JoiningPlate 40 [20-109] Recommended Fasteners (Order Separately) SeriesScrewsT-NutsDouble T-Nut (if applicable)4024-118-820-05820-0503024-112-820-05820-0502821-110-820-057—1.5″25-110-525-002, 25-082 or 20-18225-041 or 25-0461″25-108-425-031, 25-034 or 25-03625-032 or 25-037 40Series M8T-Nut[20-058] M8DoubleT-Nut[20-050] M8x18BHCS[24-118-8] Joining PlatesOrdering Information SeriesABCDEUnitWeightPart #4011411440179Each163 g20-10911411440179Each163 g20-11015415440179Each341 g20-11315415440179Each341 g20-11430/28808028129Each39 g20-105808028129Each39 g20-106 SeriesABCDEUnitWeightPart #1.5″4.50″4.50″1.50″0.75″0.34″Each173 g20-3044.50″4.501.50″0.75″0.34″Each173 g20-3056.00″6.00″1.50″0.75″0.34″Each359 g20-3066.00″6.00″1.50″0.75″0.34″Each359 g20-3071″3.00″3.00″1.00″0.50″0.28″Each41 g20-3143.00″3.00″1.00″0.50″0.28″Each41 g20-315 A63°BCTYPD ØE 45°ATYPCBD ØE BA45°ØEDC A63°CDØEB 104Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsBrackets, Gussets & PlatesCatalog 1816-3/US 105 ApplicationAngle Brackets are used to fasten profiles together without any machining.Although it does not provide as solid a joint as other fastening methods, it allows flexibility for positioning and joining of profiles with no servicing.Ordering Information SeriesABCDHole ∅WeightPart #403438.138.16.493828-6023476.276.26.497928-60630/282525.425.43.28.4928-6012557.257.23.28.42128-6052015.919.119.13.25.5428-600 SeriesABCDHole ∅WeightPart #1.5″1.34″1.50″1.50″0.25″9mm3828-6021.34″3.00″3.00″0.25″9mm7928-6061″0.63″0.75″0.75″0.13″5.5mm428-600Technical DataAluminum, AnodizedAngle BracketsRecommended Fasteners (Order Separately) SeriesScrewsT-NutsDouble T-Nut (if applicable)4024-118-820-05820-0503024-116-820-056—2824-110-820-055—2024-108-520-045—1.5″25-110-525-00225-0411″25-106-425-031—Connecting Elements28-60528-606 28-60028-60128-602 A B C D A D B C 104 Industrial Profile SystemsBrackets, Gussets & PlatesCatalog 1816-3/US 105Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAApplicationAngle Brackets are used to fasten profiles together without any machining.Although it does not provide as solid a joint as other fastening methods, it allows flexibility for positioning and joining of profiles with no servicing.Technical DataAluminum, AnodizedAngle BracketsConnecting ElementsRecommended Fasteners (Order Separately) SeriesScrewsT-NutsDouble T-Nut (if applicable)4024-118-820-05820-0503024-116-820-056—2824-110-820-055—2024-108-520-045—1.5″25-110-525-00225-0411″25-106-425-031—Ordering Information SeriesABCDHole ∅WeightPart #407438.138.16.4984 g28-6047476.276.26.49174 g28-60830/2850.825.425.43.28.418 g28-6035357.257.23.28.445 g28-607203619.119.13.25.510 g20-116 SeriesABCDHole ∅WeightPart #1.5″2.91″1.50″1.50″0.25″9mm84 g28-6042.91″3.00″3.00″0.25″9mm174 g28-6081″2.00″1.00″1.00″0.13″5.5mm18 g28-603 20-11628-60328-60428-60728-608 A B C D A D B C 106Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsBrackets, Gussets & PlatesCatalog 1816-3/US 107 28Series M6x16BHCS[24-116-6] AnyM6T-Nut28 Gusset[20-101] DoubleT-NutSt [20-050]M8x18BHCS[24-118-8]40Series Gusset[20-103]ApplicationProvide a high strength connection between profiles. Gussets are used to attach profiles at 90O angles without additional fasteners. Can be added to joints with fasteners to increase strength or ensure accurate right angles. Ordering Information SeriesABCDEFGWeightPart #407777342040890.14 kg20-1027777742040890.31 kg20-10330/28777725.42040870.11 kg20-1011.5″3.03″3.03″1.25″0.75″1.50″0.32″0.34″0.14 kg20-4403.03″3.03″2.75″0.75″1.50″0.32″0.34″0.31 kg20-4411″3.03″3.03″0.875″0.75″1.50″0.32″0.28″0.11 kg20-442* For Machining Tap use part number 19-010 for each profile endTechnical DataAluminum, Clear AnodizedOrder all hardware separately. Machined Gussets20-10120-44220-10220-44020-10320-441Recommended Fasteners (Order Separately) SeriesScrewsT-Nuts4024-118-820-058 or 20-0503024-116-620-0562824-116-620-0551.5″25-112-525-002 or 25-0411″25-110-425-031, 25-034 or 25-036Gussets B A F E D C ØG B A F C E D ØG B A F E D C ØG E 106 Industrial Profile SystemsBrackets, Gussets & PlatesCatalog 1816-3/US 107Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Gusset[20-4040]40SeriesM8x16BHCS[24-116-8]M8T-Nut[20-058]Gusset[20-8040]ApplicationProvide a high strength right angle connection between two profiles. These gussets can only be used for right angle connections in-line with T-slots as shown. Cast tabs help align the gussets in the center of the profile.Technical DataDie Cast AluminumRecommended Fastening Hardware (Order Separately) SeriesScrewsT-Nuts4024-116-8Any M82025-106-425-031, 25-034 or 25-0361.5″25-112-525-002 or 25-041Ordering InformationDescription Unit Weight Part #Gusset 40 Each 59 g 20-4040Gusset 80×40 Each 136 g 20-8040Gusset 20 Each 36 g 20-1010GussetsCast Gussets20-404020-8040 9.020.58.738.08.045.00°36.036.05.5 9.020.58.738.08.0 45.00°36.036.05.5 9.020.58.738.08.0 45.00°36.036.05.5 12.023.048.020.09.08.038.076.08.576.0 12.023.048.020.09.08.038.0 76.08.576.0 12.023.048.020.09.08.038.0 76.08.576.0 17 20 20 3 8 Ø5.5 8.5 20-1010 108Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsBrackets, Gussets & PlatesCatalog 1816-3/US 109 Corner Elements21-03521-03621-03721-038 40 24 20 M8 7 80 64 8 40 20 M8 7 40 20 forM8BHCSC’bored 80 40 20 forM8BHCSC’boredCorner ElementsApplicationDesigned for attaching profiles at 45O. Ideal for trusses, bracing and supports.Ordering Information Series Description Unit Weight Part # 40 Corner Element 1, 40 Each 71 g 21-035 Corner Element 1, 80 Each 45 g 21-036 Corner Element 2, 40 Each 67 g 21-037 Corner Element 2, 80 Each 133 g 21-038 Corner Element 3, 40 Each 73 g 21-135 Corner Element 3, 80 Each 150 g 21-136 End Cap 40 x 40-45O Each 6 g 18-820 Technical DataAluminum, Clear Anodized M8T-Nut[20-058]Flat Fastening Set[20-028]M8Tap7mm Access HoleCorner Element 1 or 3Profile-to-WallFastener2 x [20-015] M8 x 20 BHCS[24-120-8]CornerElement 211.1M8T-Nut[20-050 or 20-058]UniversalFastener[20-004] 21-13521-136 80 20 40 7 40 40 8.3 40 20 7 108 Industrial Profile SystemsBrackets, Gussets & PlatesCatalog 1816-3/US 109Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAApplicationThese corner brackets provide a high strength, accurate right angle connection between two profiles, while providing a low profile, aesthetically pleasing look.Ordering Information SeriesABCDEFGH Wt.Part #403820635158.5——64 g20-4040M3820675158.517.540136 g20-4080M282714525117——23 g20-2828M271455311712.52850 g20-2856M1.5″1.496″0.75″0.177″1.25″0.63″0.34″——64 g20-5081.496″0.75″0.177″2.75″0.63″0.34″0.72″1.50″136 g20-5091″1.000″0.50″0.236″0.88″0.44″0.28″——23 g20-5061.000″0.50″0.236″1.88″0.44″0.28″0.47″1.00″50 g20-507Recommended Fastening Hardware (Order Separately) SeriesScrewsT-NutsDouble T-Nuts (if applicable)4024-116-820-058, 20-081 or 20-18120-0502824-112-620-056, 20-090 or 20-190—1.5″25-110-525-002, 20-082 or 20-18225-041 or 25-0461″25-107-425-031, 25-034 or 25-03625-032 or 25-037Technical DataAluminum, Clear AnodizedMachined Corner Elements20-2828M20-4040M20-506 20-50820-2856M20-4080M20-507 20-509Corner Elements A A B B C CornerElementMachined1″x1″[20-506] 1″Series 1/4-20″x7/16″BHCS[25-107-5] 1/4T-Nut[25-031] ØF D ØE” G H D ØF ØE 110Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsBrackets, Gussets & PlatesCatalog 1816-3/US 111 Notes 110 Industrial Profile SystemsPanels & DoorsCatalog 1816-3/US 111Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Panels 112-114Wire Mesh 113Panel Mounting Blocks 115-118 Mesh Retainers 119-120Bifold Door Glide 121-122Sliding Door Set 123Sliding Door Guide 124 Door Guide System 125Rollers 126Roller Insert 25 127Rail Carts 128Roller Carts 128Section 4Panels & Doors Contents 112Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsPanels & DoorsCatalog 1816-3/US 113 Recommended Use Opacity Cost Vertical, Horizontal, Shelving, Shelving, Transparent Non- Vertical, Non- No Load or Opaque Low Medium High Panel Type Structural Structural Structural Load Supporting See Through Lexan® ✔ ✔ ✔ ✔ ✔ Wire Mesh ✔ ✔ ✔ ✔ T RESPA ® ✔1 ✔ ✔1 ✔1 ✔ ✔ ✔ Expanded PVC ✔ ✔ ✔ ✔ Aluminum Veneer ✔ ✔ ✔ ✔ ✔ ✔1 Can be used, but not an economical solution. Panel MaterialsLexan® High-impact resistant polycarbonate panels provide clarity, safety, security and energy savings. Meets every industry standard for general purpose window glazing. Clear or light grey smoked. Wire Mesh Wire mesh provides a high level of security and can be used for safety guarding and enclosures. PVC coating provides a smooth, snag-free surface that is extremely rust and corrosion resistant. T RESPA ® TRESPA® is a solid grade decorative building panel, suitable for horizontal surfaces and vertical panels. Resistant to scratches, corrosives and solvents. Can be drilled and tapped. Expanded PVC Light duty colored panel material, primarily for use vertically. Can also be used as light duty shelving material. Not recommended for temperature over 90°C (194°F). Aluminum These panels have a very high strength to weight ratio. The panels have clear anodized aluminum skins on Veneer each side with a high density hardboard core. These panels can be used in both horizontal and vertical applications.Special Items Special panel materials including color selection of stock material are available. IPS capabilities include custom machining of steel and alumunim panels for use in fixtures, machine bases and assemblies. Contact your local representative or an IPS Application Engineer to review special requirements. Special item availability includes: • Machined Steel and Aluminum Surfaces • Perforated Metal Decking • Welding Curtains • Sound Insulating Panels • Decorative Panels • Wood and Laminate Panels • Glass and Clear Plastic CompositesPanel Selection GuidePanel Characteristics 112 Industrial Profile SystemsPanels & DoorsCatalog 1816-3/US 113Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA ApplicationHigh-impact resistant polycarbonate panels provide clarity, safety, security and energy savings. Meets every industry standard for general purpose window glazing.Technical Data Lexan®, clear or light smokedUL ListedMaximum Size: 1219.2 x 2438.4mm (4′ x 8′)Ordering Information*Description Unit Weight Part #3mm Lexan® – Clear m2 3.60 kg/m2 26-790-3P6mm Lexan® – Clear m2 7.62 kg/m2 26-790-6P6mm Lexan® – Light Smoked m2 7.62 kg/m2 26-795-6P* Call for other shades and thicknesses.* For cut-to-size panels, delete the “P” from the end of the part # and specify panel dimensions. A minimum charge of 1/8 of the standard panel size will apply.ApplicationWire mesh provides a high level of security and can be used for safety guarding and enclosures. Provides a smooth, snag-free surface that is extremely rust and corrosion resistant.Technical Data Flat welded steel wire with fuse-bonded PVC coating.Maximum Size: 1219.2 x 2438.4mm ( 4′ x 8′)Ordering Information*Description Wire Gage Unit Weight Part # 1/2” x 1/2” Black 16 m2 2.89 kg/m2 26-210-05P1” x 1” Black 12 m2 4.17 kg/m2 26-210-10P1” x 1” Yellow 12 m2 4.17 kg/m2 26-250-10P1½” x 1½” Black 12 m2 2.98 kg/m2 26-210-15P2” x 2” Black 12 m2 1.92 kg/m2 26-210-20P * For cut-to-size panels, delete the “P” from the end of the part # and specify panel dimensions. A minimum charge of 1/8 of the standard panel size will apply. ApplicationTRESPA® is a solid grade decorative building panel, suitable for horizontal surfaces and vertical panels. Resistant to scratches, corrosives and solvents. Can be cut, drilled and milled. Suitable for doors, shelves and enclosures.Technical Data Thermosetting resins, homogeneously reinforced with cellulose fibers.Non-toxic, asbestos free, has good fire retarding characteristics. Finished on both sides.Maximum Size: 1828.8 x 2438.4mm ( 6′ x 8′) Weight Part #* Thickness Unit (kg/m2) Black Grey Blue White 6mm m2 8.57 26-410-6P 26-420-6P 26-430-6P 26-480-6P 8mm m2 11.4 26-410-8P – – – 10mm m2 14.3 – – 26-430-10P –* For cut-to-size panels, delete the “P” from the end of the part # and specify panel dimensions. A minimum charge of 1/8 of the standard panel size will apply. Lexan® PanelsWire MeshT RESPA ® Panels Panels 114Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsPanels & DoorsCatalog 1816-3/US 115 Expanded PVCPanelsApplicationLight duty colored panel material, primarily for use vertically. Can also be used as light duty shelving material.Technical Data Rigid expanded foam polyvinyl chloride (PVC)UL RecognizedMaximum Size: 1219.2 x 2438.4 mm (4′ x 8′)Ordering Information* Description Unit Weight Part #6mm Expanded PVC – Black m2 4.19 kg/m2 26-510-6P6mm Expanded PVC – Blue m2 4.19 kg/m2 26-530-6P6mm Expanded PVC – White m2 4.19 kg/m2 26-580-6P* For cut-to-size panels, delete the “P” from the end of the part # and specify panel dimensions. A minimum charge of 1/8 of the standard panel size will apply. ApplicationThese panels have a very high strength to weight ratio. The panels have clear anodized aluminum skins on each side with a high density hardboard core. These panels can be used in both horizontal and vertical applications.Technical Data Veneer – Anodized AluminumCore – High Density Hardboard**Maximum Size: 1219.2 x 2438.4 mm (4′ x 8′)Ordering Information* Description Unit Weight Part #6mm Aluminum Veneer – Black** m2 5.32 kg/m2 26-110-6P6mm Aluminum Veneer – Clear m2 5.32 kg/m2 26-170-6P6mm Aluminum veneer – White** m2 5.32 kg/m2 26-180-6P* For cut-to-size panels, delete the “P” from the end of the part # and specify panel dimensions. A minimum charge of 1/8 of the standard panel size will apply.** PVC core Aluminum Veneer 114 Industrial Profile SystemsPanels & DoorsCatalog 1816-3/US 115Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAMultiblock PA andUniblock PAApplicationVersatile block for mounting panels and screens. The block locks into the T-slot at a 90° position with an offset design to suit various panel thicknesses. Movable captive nut provides larger alignment range for locating through holes in panels.Technical Data Glass Filled Nylon, BlackSquare Steel Nut, M6 or M4Spacing Table PriofileSeriesMax LoadN (lbs)DimensionsABC40250 (56)80400-600530, 28210 (47)70400-5002.820100 (22)60300-40021.5″250 (56)5.0″20″ – 40″0.20″1″100 (22)2.5″10″ – 15″0.08″ 1 Floating square nut secured within the multiblock by flat spring provides for alignment flexibility2 Insertion of Multiblock PA in the T-slot3-4 Recommended gaps for assembling Multiblocks PA5 Distance between Multiblock center and floating nut 12345Panel Mounting 116Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsPanels & DoorsCatalog 1816-3/US 117 Ordering InformationSeries Description Unit Weight Part #28/30 Multiblock PA 30/28 with M6 Nut Each 10 g 22-103Multiblock PA 30/28 14.4 4 20 8 6.2 4 8.5 23.5 22-103 1234 1-4 Mounting options for Multiblock PA 30/28 on 28 series profiles5-6 Mounting options for Multiblock PA 30/28 on 30 series profiles 5678Panel Mounting Ordering Information Series Description Unit Weight Part # 40 Multiblock PA 40 with M6 Nut Each 13 g 22-100 40/1.5″ Multiblock PA 40 with ¹⁄â‚„-20 Nut Each 13 g 22-115 1-4 Various options for flush panel mounting of Multiblock PA 405 Determining the length of M6 screw on Multiblock PA 40 1234522-100Multiblock PA 40 82051523.52046.28.5 116 Industrial Profile SystemsPanels & DoorsCatalog 1816-3/US 117Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAClamp Multiblock22-11222-113 E F C D A B Multiblock Al22-10522-106 22-108ApplicationMounting element for attaching panels to 40, 30 and 28 Series profiles without using additional fasteners or machining the panel. Insert multiblock into T-Slot at any location and lock in position by turning 90O clockwise. Slide locking clip to secure the panel. To remove panel, loosen locking clip with a flat screwdriver. Technical DataGlass Filled Nylon (Black)For 22-112: Max load in direction F per drawings above is 250N (56lbs); in opposite direction: 50N (11lbs)Max Panel Thicknesses 22-112: 10mm (3/8″) 22-113: 8mm (5/16″)1 Mounting position for panels up to 10mm thick to clamp Multiblock 40.2 Mounting position for panels up to 5mm thick Multiblock rotated180°3 Edge distance between panel element and profile 12 3 Technical DataAl, clear anodizedMax. load at 90° angle to T-slot: 22-105: 500 N (112 lbs) 22-106: 750 N (169 lbs) 22-108: 1000 N (225 lbs)ApplicationMounting element for panels and accessories. Various mounting dimensions are obtained by rotating the block. Order hardware separately. Dimensions (mm) Weight Series A B C D E F (g) Part # 40/1.5″ 20 25 5 5 11 6 10 22-112 30/28 20 22 5 2 7 – 7 22-113Ordering Information 22-10522-10622-108 Ordering Information Dimensions (mm) Series A B C ∅D Weight Part # M5 — — — 18 g 22-105 40, 30, 28 M6 17.5 25.4 6.3 58 g 22-106 M8 22.5 30 8.3 60 g 22-108 6.5 6.5 ∅D 4x 31.8 11.0 23.0 15.0 31.8 15.9 A C B 7.5 15.9 31.0 17.5 5.4 5.4 12.0 23.0 ∅5.4 3x A 15.9 Panel Mounting 118Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsPanels & DoorsCatalog 1816-3/US 119 Ordering InformationProfile Series Description Unit Weight Part #20 Uniblock PA 20 with M4 Nut Each 3 g 22-107 Multiblock PA 20 with M4 Nut Each 3 g 22-1041″ Multiblock PA 1″, 1/4-20 Each 3g 22-116Uniblock PA 20 12.5 4 16 2 6 ∅5 14 22-107Mounting options for Uniblock PA 20 0.73″ 0.09″ 0.16″ 0.75″ 0.98″ 0.23″ 0.55″ 0.48″ 0.25″ 0.43″ 0.16″ 22-116Uniblock 25 CSPanel Mounting 0.28 0.20 0.17 0.96 1.02 0.31 0.31 0.26 0.83 0.55 ApplicationThe Uniblock 25 CS includes a captive screw to prevent the loss of hardware when working behind a removable panel. The block locks at a 90° position with an offset for 6-8mm panel thicknesses on 40 and 1.5″ Series extrusions.Ordering InformationDescription Unit Weight Part #Uniblock 25 CS Each 39 g 22-11722-117 118 Industrial Profile SystemsPanels & DoorsCatalog 1816-3/US 119Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USADeluxe B D E C H A F L G J K 20-20020-202Back Plate included but not shown on dimension drawings.Wire Mesh Retainers ApplicationDeluxe retainers are used to securely fasten wire mesh within the T-slot of profiles. This accessory requires screws and T-nuts to mount to profile; order these items separately.Technical Data Aluminum5/16-18 BHCS included to secure back plate to retainer.Recommended Fastening Hardware (Order Separately) SeriesScrewsT-Nuts4024-116-820-0582024-108-5 20-0451.5″25-110-5 25-002, 20-082 or 20-182 StyleABCDEFGHJKLWt.Part #Mesh40754.83920.8151220128.1980 g20-20220392209941065.55.514 g20-200Panel40754.83920.8151520—M8960 g20-202P203922099710—M65.510 g20-200POrdering Information A F C D B E H G K L 20-200P20-202P 120Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsPanels & DoorsCatalog 1816-3/US 121 22-11022-111 64 12 Ø7 6 1.5 BackPlateincludedbutnotshownondimensiondrawings. ApplicationEconomical solution for securely fastening wire mesh to 40 and 1.5″ Series profiles.Technical Data Steel, Zinc PlatedBHCS included to secure back plate to retainer.Ordering Information Unit Weight Part #Economy Wire Mesh Retainer – M6 Each 59 g 22-110Economy Wire Mesh Retainer – 1/4-20 Each 59 g 22-111 EconomyWire Mesh Retainers 120 Industrial Profile SystemsPanels & DoorsCatalog 1816-3/US 121Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USABifold Door Glides A B E D C F 21-08021-08125-08025-082 WasherSpacerDoorGlideFHCSTap M8 25mm deep40Series 30/28Series M8x20FHCSSpacerDoorGlideWasherTapM820mmdeepM8x20ApplicationBifold doors are used in very confined areas. Door glides allow rotational and sliding motion at the top and bottom of a vertical member within a permitted bifold door frame. Two glides (one top and one bottom) are required per door.Technical DataDoor Glide – UHMW Spacer – Steel, Zinc Plated Washer – Steel, Zinc Plated Note: Hardware and tap are SAE Standard Use the following chart to help select the correct part for your application. Frame SeriesDoor SeriesGlide Part #40 & 80 Series40 Series21-08128 Series28 Series21-0801.5″1.5″25-0801″1″25-082Bifold DoorsOrdering InformationShips complete with 2 glides, 2 screws, 2 spacers and 2 washers. Dimensions (mm or inch) Part # A B C D E F 21-081 36.6 32 9.4 5.3 8 Ø15.2 thru c’sink Ø19 x 90° 21-080 25.4 32 9.4 5.3 8 Ø11.1 thru c’sink Ø14 x 90° 25-080 1.44″ 1.26″ 0.370″ 0.210″ 0.315″ Ø0.598″ thru c’sink Ø0.750 x 90° 25-082 1.00″ 1.00″ 0.370″ 0.210″ 0.250″ Ø0.438″ thru c’sink Ø0.563 x 82° 122Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsPanels & DoorsCatalog 1816-3/US 123 Design ExamplesExamples consider the hinges to be medium duty plastic hinges (page 137). Other hinges can be used and dimensions would only be slightly affected.To determine the width of the narrow door, subtract the sum of the door gaps and 48mm from the frame’s inside width dimension, then divide by 2.Example:660 – (5 + 5 + 9.5 + 48) 660 – 67.5 = 592.5 592.5 = 296 2To determine the width of the wide door, add 48mm to the width of the narrow door.Example:296 + 48 = 344To determine vertical door dimension, subtract clearance required for guides and washers (14mm) from the vertical opening dimension.Example:762 – 14 = 748 To determine the width of the narrow door, subtract the sum of the door gaps and 36mm from the frame’s inside width dimension, then divide by 2.Example:660 – (4.5 + 4.5 + 6.4 + 36) 660 – 52 = 608 608 = 304 2To determine the width of the wide door, add 36mm to the width of the narrow door.Example:304 + 36 = 340To determine vertical door dimension, subtract clearance required for guides and washers (14mm) from the vertical opening dimension.Example:762 – 14 = 748 Bifold Door Glides 838 762 748 7 7 660 296 344 5 5 9.5 812.8 304 340 660 4.5 4.5 6.4 7 748 7 762 Design Example for 40 Series Bifold DoorDesign Example for 28 Series Bifold Door* When using 28 Series for the doors and 40 Series for the frame, use the design example for 28 Series.Bifold Doors 122 Industrial Profile SystemsPanels & DoorsCatalog 1816-3/US 123Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Sliding Door SetApplicationPackaged system for creating a sliding door with 40 and 1.5″ Series profiles. The set consists of the necessary supports, rollers and roller housing to mount the movable sliding panel to an assembly. Hardware will vary based on design and must be ordered separately. Ordering InformationDescription Unit Weight Part #Sliding-Door Set Set 36 g 23-065Technical DataSupports: Aluminum, Clear Anodized, Fully machined for assemblyRollers: Roller PA 40 (21-069)Roller Holders: 10-040 Doors 23-065 124Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsPanels & DoorsCatalog 1816-3/US 125 Sliding Door Guide23-054DoorsApplicationAllows a door constructed of 32×18 Bi-Slot profile to slide in the T-Slot of a 40 Series profile. This guide attaches to the door frame through a 7mm mounting hole. Two Guides with opposite offsets are available, allowing 2 panels to be mounted in a single T-Slot. Technical DataPolyoxymethylene, BlackSpring/Spring Bolt are SteelSet includes four guides – two of each offset.Door Sizing – size door 15mm smaller than frame opening. Door gap will be 7mm at bottom and 8mm at top.Ordering InformationDescription Unit Weight Part #Sliding-Door Guides for 32×18 Bi-Slot Set 36 g 23-054 1 Two sliding doors in T-slot of a 40 series profile2 Four sliding doors in T-slots of an 80×40 profile 12See page 46 for application details 34 53 Mounting dimensions within a frame4 Slide piece positioning in the T-slot5 Guide pieces function as stops when two doors slide in the same T-slot 124 Industrial Profile SystemsPanels & DoorsCatalog 1816-3/US 125Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USADoor Guide System1 Assembly of the Door Guide System2 Sliding Door with two counterweights3 Assembly of the Door Guide4-5 Counterweight Assemblies 80×80 and 160×80 23-0551 Sliding DoorShock Absorber[31-037Z3A]Reversing Unit[31-122, 31-124or 31-126]Timing Belt [31-052-1]Door Guide[23-055]Counterweight Assembly Doors Ordering InformationDescription Unit Weight Part #Door Guide 1 set 0.12 kg 23-055Closure Plate 80×80 1 set 0.48 kg 21-155 Closure Plate 160×80 1 set 0.96 kg 21-156 CounterweightsDuct wall support and wall profiles are used to build the counterweight. A closure plate attached with four M6 Profile-to-Wall Fasteners forms the bottom of the counterweight. Heavy metal scrap may be used as filler material. Suitable conduit cap is used to close the top of the counterweight.Closure PlateSt, black epoxy finishComplete with fastening setTechnical DataDoor Guide: Polyoxymethylen, blackComplete with the following: Steel plate insert, M6x25 BHCS, M6 T-slot nut St, three M6x25 SHCS, and three M6 hex nutsApplicationDoor guides are used to build doors that operate between two vertical 40 series profiles. The weight of the door may be counter-balanced by one or two counterweights that are connected to the door space with door guides, timing belt 25T10 and reversing unit 40. The size of the counterweight is determined by the weight of the door. The operation of the door may be motorized by attachment of a suitable drive to one of the reversing units.Door GuidesFour guides are usually attached to the door, and slide in the inside slots of the vertical 40 series profiles. Two guides are attached to each of the counterweights, and slide in the outer slots of the vertical frame profiles.54 Locking Screw[24-695]Conduit Cap[15-805]Wireway Conduit[15-081] & [15-082]Closure Plate Set80x80 [21-155]M8Locking Screw[24-695]Conduit Cap[15-807]Wireway Conduit[15-082] & [15-161]Closure Plate Set80x160 [21-156]M8 2 3 Locking Screw[24-695]Conduit Cap[15-805]Wireway Conduit[15-081] & [15-082]Closure Plate Set80x80 [21-155]M8Locking Screw[24-695]Conduit Cap[15-807]Wireway Conduit[15-082] & [15-161]Closure Plate Set80x160 [21-156]M8 126Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsPanels & DoorsCatalog 1816-3/US 127 Technical DataGlass-filled nylon, black complete with two deep groove ball bearings with dust covers.Max. load 150 N (34 lbs)Leave 5mm offset between profiles.Hardware ordered separately.ApplicationVersatile ball bearing roller which can be mounted in the T-slot. Roller has asymmetric design for various clearance dimensions such as on sliding doors and panels. 123456781-4 Application and details for sliding door with Roller PA 405 Servicing for Roller PA mounted in 40×40 Heavy profile6 Mounting the Roller PA 40 for a sliding panel application7 Max. load F = 150 N8 Dimensions of offset on 40 series profile Ordering InformationDescription Unit Weight Part #Roller PA 40 1 pc 32 g 21-069Shoulder Bolt M5x6x25 1 pc 800.17Roller 40 ∅6 ∅26 ∅39 4 8 18 21-069Doors 126 Industrial Profile SystemsPanels & DoorsCatalog 1816-3/US 127Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAApplicationVersatile roller mounted in a housing. Step roller is available without housing for sliding panel applications. Recommended Hardware SeriesScrews (Order 2)T-Nut (Order 2)4024-314-620-1903024-312-620-1902024-310-620-1901.5″25-108-420-193Ordering InformationDescription Unit Weight Part #Roller Insert 25 Each 32 g 21-065 Technical DataRoller: Delrin, Black Housing: Aluminum, Clear Anodized Pin: Stainless, SteelHardware not includedRoller Insert 2521-065DoorsRolling door constructed with 28 series profiles guided on top with UHMW strip 12-410Two bypassing covers constructed with 28 series profiles rolling on a pair 30×60 profiles. 2 Clearance dimensions 56 25.4 40 FOR M6SHCS 12 128Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsPanels & DoorsCatalog 1816-3/US 129 ApplicationDesigned for use in 80×40 Rail Profile part #14-248 (See Linear Section). Rail carts used for hanging and sliding doors and other hanging components such as moving material on workstations. Ordering InformationDescription Unit Weight Max LoadN (lbs) Part #8-Roller Cart Set 0.20 kg 440 (100) 23-2004-Roller Cart Each 45 g 220 (50) 23-2014-Roller Cart with Fastening Set Set 64 g 220 (50) 23-202 Profile Unit Weight Part # Profile 80×40 Rail Transport Cut off 6m max. 4.19 kg/m 14-248*saw cut needed for cut to length 19-002Technical DataHousing: Aluminum, Clear Anodized Wheel: Delrin, needle roller bearings Washer: NylonHardware included with 23-202: Bolt, washer, Teflon® tubing and 3mm spacer. M5x6x50 Shoulder BoltM6 WasherRail Cart, 4 Roller[23-201]Teflon Tubing3mm SpacerM5 Tap[23-202]Kit IncludesRail Cart andHardwareOrder HardwareSeparatelyM4 T-Nut Zn[20-034]Nylon SpacerM4x20 SHCS[24-320-4]1mm Gap 11 Assembling the 4-Roller Rail Cart to a door frame. Apply Loctite™ to M6 screw to prevent loosening. Guide along lower section for sliding door using nylon spacer (8mm long, O.D. 8mm)2 Calculations for Bi-fold sliding doors3 Sliding Door and Bi-fold sliding door assemblies4 8-Roller Rail Cart assembly in 80×40 Rail profile Required clearance C and required gap B depend on location of pivot point A.For 40 Series Profiles:B = A2 + 202 – AC = A2 + 202 – 20For A ≤ 27 B = 27 – A234 Rail Carts 20168032328 40 14-248 127 76.2 12.7 25.4 TYP. 25.4 6 29 M6 ∅6.5 30 ∅15.9 38 54 FOR M8 SHCS 23-20023-202Doors 128 Industrial Profile SystemsHandles & Hinges Catalog 1816-3/US 129Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Light Duty Metal Handles 130Light Duty Plastic Handles 131Plastic Handles 132Tube Handles 133Light Duty Hinges 134-136Medium Duty Lift-Off Hinges 137-138Medium Duty Metal Hinges 139-140Adjustable Hinges 141Positioning Hinges 142Concealed Hinges 142Multi-Series Hinges 143 Butt Hinges 144Lift-Off Hinges 144Pivot Joints 145Quarter Turn Latches 146-147Inside Handle 147Latch Accessories 148Dead Bolt 149Slam Latch 149Magnetic Catches 150Ball Catch 151Ball Plunger 1523-Way Ball Catch 152Door Stops 153 Section 5Handles & Hinges Contents 130Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsHandles & Hinges Catalog 1816-3/US 131 38.1186177.8#10-32X14mmDP3015 ApplicationHandle for light duty doorsTechnical Data23-030: Aluminum, Clear Anodized 23-034: Aluminum, Black Powdercoat Ordering InformationDescription Unit Weight Part #Light Duty Aluminum Handle Each 85 g 23-030Light Duty Aluminum Angled Handle Each 11 g 23-034 23-030Light Duty Aluminum23-0341 Swinging Doors2 Sliding Door 141 48 24 32 M6x1 128 Recommended Fastening Hardware (Order Separately) Part #ScrewsApplication23-030(2) 25-110-2Panel Mount23-034(2) 24-116-6Panel Mount (picture #1)(2) 24-140-6Profile Mount (picture #2)Handles 24-116-6 x 2 24-140-6 x 225-110-2 130 Industrial Profile SystemsHandles & Hinges Catalog 1816-3/US 131Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAApplicationHandle for double doors to keep operators hands from hitting when opening. Ordering InformationDescription Unit Weight Part #Large Angled Handle Each 356 g 23-074Open Angled Handle Each 114g 23-075Caps for 23-075 Each 3g 23-076Technical DataGlass-Fiber Reinforced Plastic Black Matte Finish SeriesScrewsT-Nuts40/1.5″(2) 24-316-8(2) 20-05830(2) 24-312-8(2) 20-05828(2) 24-312-8(2) 20-057Light Duty Plastic23-07523-076Handles23-074 80 198 100 160 8.8 4.5 12.5 828133134100656mm 222136Recommended Fastening Hardware (Order Separately) 132Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsHandles & Hinges Catalog 1816-3/US 133 ApplicationMultipurpose handle for mounting onto panels or profiles. Hardware length is determined by applications.Technical DataGlass Filled Nylon, BlackOrder Hardware Separately. Use M6 for 23-033 and 23-028 Recommended Fastening Hardware (Order Separately) Part #SeriesScrewsT-Nuts23-03340(2) 24-318-6(2) 20-05630(2) 24-316-6(2) 20-05628(2) 24-316-6(2) 20-0551.5″(2) 25-311-4(2) 25-001 or 20-0831″(2) 25-308-4(2) 25-031 or 25-03423-02840/30(2) 24-318-6(2) 20-05628(2) 24-316-6(2) 20-05523-23320(2) 24-114-5(2) 20-054Plastic Handles BCAEDØFØGH Ordering Information DimensionsWeight Part #ABCDEFGH11293.52136306.510.5633 g23-0331701522852456.510.58.570 g23-028See Drawing26.2 g23-233Caps for 23-233 (2 per)4 g23-233z1Handles BCAEDØFØGH 23-03323-028 B C A E D ØF ØG H 23-233 32 48 142 16 120 ∅6 8 23-233 23-223Z1 23-233Z1 132 Industrial Profile SystemsHandles & Hinges Catalog 1816-3/US 133Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAApplicationHandle allows variable lengths. Order tube cut to length for a custom fit solution.Ordering InformationDescription Unit Weight Part #Tube Handle Ends Each 12.7 g 23-072Center Support for handles over 36″ Each 7.6 g 23-073Coated Steel Tube Cut off max. 2m 1.52 kg/m 13-012 * Saw cut needed for Cut to Length 19-007Technical DataPolyamide, Black Tube: Coated SteelOrder Hardware SeparatelyRecommended Fastening Hardware (Order Separately) Part #ScrewsT-Nuts23-07225-312-520-08223-07325-316-520-082 A A-34mm Tube HandleCenter Support[23-073] SteelTubeCut to Length[13-012] Tube Handle Ends [23-072] Tube Handles23-07223-073 Ø30 46 80 60 34 54 5/16SHCS 34 80 46 60 Ø30 24 5/16SHCS Handles 134Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsHandles & Hinges Catalog 1816-3/US 135 Light Duty PA 201 Assembly of Hinge PA 20 on panel2 Hinge positions3-4 Clearance dimensions5 Range of swing23-020ApplicationFor light doors and lids constructed of 20 Series profiles Recommended Fastening Hardware (Order Separately) ScrewsT-Nuts24-208-4 (1 per hole)24-044 (1 per hole)Ordering InformationDescription Unit Weight Part #Hinge PA 20 Series Each 7 g 23-020Technical DataGlass-filled Nylon, Black Max Load: 40Nm (30 ft-lbs) 12 M4T-Nut 20[20-044]M4 Hex Nut[24-706-4]M4x8 FHCS[24-208-4]M4x12 FHCS[24-212-4] 345 60300-400 Appx.1 3mm 14 30 24 40 5 11 FOR M4 FHCS Hinges Medium Hinge 30/28ApplicationSuitable for medium loads such as machine and guard doors. Can be used with 30 or 28 Series profiles. Technical DataZinc Cast, Black Powdercoat Pin is Stainless SteelMax. Load: 400Nm (295 ft-lbs)Ordering InformationDescription Unit Weight Part #Medium Hinge 30/28 Each 86 g 23-242 34 12 5 °° 20-056 (for 30 profile)20-055 (for 28 profile)M6x14 FHCS[24-214-6] 80400-600 Appx.1 2mm for 28 Series0mm for 30 Series 30 50 30 50 6 12.5 23-242Recommended Fasteners (Order Separately) SeriesScrewsT-Nut3024-214-620-0562824-214-620-0551 Assembly of Medium Hinge 30/28 on profiles2 Hinge positions3-4 Clearance dimensions5 Range of swing 134 Industrial Profile SystemsHandles & Hinges Catalog 1816-3/US 135Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA1-2 Attaching Light Duty Hinges 28 to 28 Series profiles and panels3 Placement of hinges on panels4 Non lift-off doors require one right hand and one left hand Hinge5 Lift-off doors require either right or left hand Hinges1 2ApplicationFor light doors and lids constructed of 28 Series profiles or light panel material. Technical DataGlass-filled Nylon, Black Max Load: 100Nm (22 ft-lbs)Recommended Fastening Hardware ScrewsT-NutHex Nut24-214-620-09024-706-6Ordering InformationDescription Unit Weight Part #Light Duty Hinge 28, Right Each 17 g 23-018Light Duty Hinge 28, Left Each 17 g 23-019Light Duty PA 2823-018 & 23-019 345 23-018 or23-019Fastening Set[20-013] x 2 80400-600 28 56 32 6 12 1.5 FOR M6 FHCS M6 Hex Nut[24-706-6]Fastening Set[20-013]23-018or 23-019M6x14 FHCS[24-214-6]Ø82412 Hinges 136Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsHandles & Hinges Catalog 1816-3/US 137 Light Duty 40 1,2 Attaching Light Duty Hinges 40 to 40 Series profiles and panels3 Placement of hinges on panels4 Non lift-off doors require one right hand and one left hand Hinge5 Lift-off doors require either right or left hand Hinges1 2ApplicationFor light doors and lids constructed of 40 Series profiles or light panel material Ordering InformationDescription Unit Weight Part #Light Duty Hinge 40, Right Each 21 g 23-021Light Duty Hinge 40, Left Each 21 g 23-023Technical DataGlass-filled Nylon, BlackMax Load: 100Nm (22 ft-lbs) 345 M6 Hex Nut[24-706-6]Fastening Set[23-022]M6 x 16 FHCS[24-216-6]Lt.Hinge[23-021/023]124Ø819 Fastening Set (x2)23-022 80400-600 40 60 32 6 13.5 4 FOR M6 FHCS 23-021 & 23-023Hinges Recommended Hardware Series Screw T-Nut Hex Nut 40 24-216-6 20-080 24-706-6 136 Industrial Profile SystemsHandles & Hinges Catalog 1816-3/US 137Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA 40Series M6T-Nut[20-056] Non-RemovableHinge[23-545] M6x16FHCS[24-216-6]ApplicationHigh quality plastic hinges for constructing medium duty guard/enclosure doors. Hinges are offered in two types: lift off (for left and right hand doors) and non-removable. Technical DataGlass-filled Nylon, Black Stainless Steel PinMax Torque: 100Nm (74 ft-lbs)Application Chart Mounting Surface 1Mounting Surface 2Gap(mm)Non-Rem HingeLeft HingeRightHinge40 Series40 Series523-54523-545L23-545R40 SeriesPanel–28 Series40 Series123-53523-535L23-535R30 Series40 Series028, 40 SeriesPanel–30 Series30 Series023-55023-550L23-550R30, 28 SeriesPanel–30 Series30 Series528 Series28 Series7 Recommended Hardware Series Screw T-Nut Panel Screw T-Nut 28 24-214-6 20-055 — — — 30 24-214-6 20-056 6mm Panel 24-220-6 24-716-6 40 24-216-6 20-056 8mm Panel 24-220-6 24-716-6 Medium Duty Plastic(Metric) A 28 B 48 ForM6FHCS NON-REMOVABLELIFT OFF Hinges Ordering Information Dimensions (mm) A B Hinge Type Weight (g) Part # Non Removable 43 23-545 45 77 Left Side Mount 43 23-545L Right Side Mount 41 23-545R Non Removable 35 23-535 35 59 Left Side Mount 35 23-535L Right Side Mount 33 23-535R Non Removable 28 23-550 30 49 Left Side Mount 28 23-550L Right Side Mount 28 23-550R 138Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsHandles & Hinges Catalog 1816-3/US 139 ApplicationHigh quality plastic hinges for constructing medium duty guard/enclosure doors. Hinges are offered in two types: lift off (for left and right hand doors) and non-removable. Technical DataGlass-filled Nylon, Black Stainless Steel PinMax Torque: 100Nm (74 ft-lbs)Ordering Information ABHinge TypeWeight (g)Part #2.74″1.57″Non Removable, 1.5″ to 1.5″4323-551Left Side Mount, 1.5″ to 1.5″4323-551LRight Side Mount, 1.5″ to 1.5″4123-551R2.28″1.38″Non Removable, 1.5″ to 1″3523-5521.93″1.18″Non Removable, 1″ to 1″2823-550Left Side Mount, 1″ to 1″2823-550LRight Side Mount, 1″ to 1″2823-550RMedium Duty Plastic (Inch) B 1.10″ A 1.89″ For1/4FHCS NON-REMOVABLE 1.5″Series 1/4T-Nut[25-001] Non-RemovableHinge1.5[23-551] 1/4-20×3/4″FHCS[25-312-4]1.50″ 1.50″ 0.07″ 1.5″to1.5″Series1.5″to1″Series1″to1″Series1.50″ 1.50″ 1.00″ 1.00″ 1.00″ 0.13″ 0.18″ 1.00″ Recommended Fastening Hardware (Order Separately) SeriesScrewsT-Nuts1.5″25-212-425-001, 20-083 or 20-1931″25-208-425-031, 25-034 or 25-036Hinges 138 Industrial Profile SystemsHandles & Hinges Catalog 1816-3/US 139Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USASteelHinges 28SeriesM6 T-Nut[20-055]SteelHinge28 – Left[23-250L]M6x8 BHCS[24-108-6] 40 to 40 Series40 to 28 Series28 to 28 Series40401.940400-22828280-22822 63.547.5Ø7.1402.525 5563.5Ø8Ø740332.5 63.5404263.5Ø823-250 23-25123-252Ordering Information Description Unit* Weight Part #Steel Hinge 40/1.5″ – Left Each 18g 23-252L Steel Hinge 40/1.5″ – Fixed Each 18g 23-252*** Steel Hinge 40/1.5″ – Right Each 18g 23-252RSteel Hinge 40/1.5″ to 28/1″ – Left Each 14g 23-251L Steel Hinge 40/1.5″ to 28/1″ – Fixed Each 14g 23-251** Steel Hinge 401.5″ to 28/1″ – Right Each 14g 23-251RSteel Hinge 28/1″ – Left Each 13g 23-250L Steel Hinge 28/1″ – Fixed Each 13g 23-250* Steel Hinge 28/1″ – Right Each 13g 23-250R*Order 23-250L & 23-250R **Order 23-251L & 23-251R ***Order 23-252L & 23-252RRecommended Fastening Hardware (Order Separately) SeriesScrewsT-Nuts4024-112-8Any 40 Series M82824-108-6Any 28 Series M61.5″25-108-425-001, 20-083 or 20-1931″25-106-425-031, 25-034 or 25-036ApplicationSteel hinges for constructing guard/enclosure doors. Lift off option allows access into enclosure. Specify a left hand or right hand lift-off hinge set depending on required direction of door opening.Technical DataSteel, Black Zinc Plated 28Series M6 T-Nut[20-055]SteelHinge28 – Left[23-250L]M6x8 BHCS[24-108-6] 40 to 40 Series40 to 28 Series28 to 28 Series40401.940400-22828280-22822 140Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsHandles & Hinges Catalog 1816-3/US 141 Ordering InformationDescription Unit Weight Part #Medium Hinge 30 Each 0.18 kg 23-024Medium Hinge 40 Each 0.18 kg 23-025Medium Hinge 40 (Locking) Each 0.20 kg 23-025L DBL T-NUTM8/24[20-049] ApplicationSuitable for medium loads such as machine and guard/enclosure doors, and as an angle connecting element for profiles. Fastens to T-Slot or profile face with integral torsion pins for precise squaring. Technical DataZinc Cast, Galvanized, BlackMax Load: 500N (112lbs)Order Hardware Separately Per Hole SeriesScrewT-Nut4024-120-820-0583024-116-620-056 1 Fastening to vertical profile and panel element (all anti-torsion pins removed).2 Fastening to vertical and horizontal profiles (2 anti-torsion pins removed).3 Fastening to vertical profiles (all anti-torsion pins removed).4 End face fastening of two profiles (with torsion pins).5 Connection of two horizontal profiles (all anti-torsion pins removed).6 Connection of two horizontal profiles (with anti-torsion pins) Positioning of hinges on a panelTorsion pins can be removed with a screwdriverHingesMedium 4023-02423-025 40 66 80 24 40 8 24 ∅8.2 ∅8.2 5.5 9.5 16.5 30 48 60 18 30 ∅6.4 ∅6.4 140 Industrial Profile SystemsHandles & Hinges Catalog 1816-3/US 141Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAAdjustable TorqueAdjustingScrew 31.7 25.4 6.7 12.7 43 36.5 ForM4BHCS TorqueAdjustingScrew 5.2 63.5 19.4 57.5 47.6 For M6 38 BHCS23-22223-220HingesApplicationAdjustable tension hinge for swinging doors to hold door open, partially open or closed. Can also adjust speed of opening or closing. Ordering Information Description Unit Weight Part #Adjustable Hinge 40/1.5″ Each 42 g 23-222Adjustable Hinge 28/1″ Each 38 g 23-220Technical DataAcetal, Black Polycarbonate hinge pinMaximum Torque: 23-220 80 Ncm 23-200 400 NcmRecommended Fastening Hardware (Order Separately) M6 Hex Nut[24-706-6]M6 x 12 BHCS[24-112-6]M6 T-Nut St[20-056]M4 T-Nut Zn 28[20-037]M4 x 10 BHCS[24-110-4]M4 Hex Nut Part #SeriesScrewsT-NutHex Nut23-22240(2) 24-112-6 (2) M6 sized for panel(2) 20-056(2) 24-706-61.5″25-110-4 25-001, 20-083 or 25-193(2) 25-706-423-22028(2) 25-110-4 (2) M4 sized for panel(2) 20-037(2) 24-706-41″25-106-125-045— 142Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsHandles & Hinges Catalog 1816-3/US 143 ApplicationMultiple position hinge for swinging doors. Models with preset angles also open to 180°.Ordering Information Description Unit Weight Part #Positioning Hinge 120° Each 37 g 23-226Recommended Fastening Hardware (Order Separately)Profile to Panel ScrewsT-NutHex Nut(4) 24-112-5(2) 20-052(2) 24-706-5Technical DataAcetal, Black Positioning Torque: 1.1 Nm Maximum Load: 450N M5 Hex Nut[24-706-5]M5 T-Nut St[20-052]M5 x 14 BHCS[24-112-5] 52 18 34 57 34 ForM5BHCS Covers23-226PositioningHingesConcealedApplicationFor inside or concealed door or lids. Used with 40 Series profiles using M6 T-nuts. Concealed hinges are stackable to create non-removable hinges. To create a stackable hinge, order an additional hinge half and an additional hinge pin.Technical DataWings: Aluminum Bolt: Stainless SteelOrdering InformationDescription Unit Weight Part #Full Hinge 1 Set 39.8 g 23-225Half Hinge Each 24 g 23-225z1Hinge Pin Each 11.8 g 23-225z2Recommended Fastening Hardware (Order Separately) ScrewsT-Nuts(4) 24-216-8(4) 20-056STACKABLE(Non-Removable) 23-225 50.0 30.0 101.1 4.0 ∅10.0 FOR M6 FHCS 25.2 42.2 142 Industrial Profile SystemsHandles & Hinges Catalog 1816-3/US 143Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA 123456 7 1 Recommended attachment. Hinge cannot be loosened from outside. Door swings 180°2-3 Mounting on inside of doors or lids where access from outside is not desired for security reasons.4-6 Front mounting applications 7 Inside mounting clearance8 Recommended hinge positions Technical DataSt, blackIncludes: M5x16 cup square bolt, M5 hex nut, M5 washer, three M5x8 dome head screws. Order M5 T-nuts separately.Max. load 250 N (56 lbs)ApplicationFor outside or inside of doors and lids. Used with 40, 30, 28, 20, 1.5″ and 1″ Series profiles using M5 T-nuts St or Zn.Ordering InformationDescription Unit Weight Part #Multi-Series Hinge 1 set 51 g 23-016 Multi-Series8 Hinges23-016 144Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsHandles & Hinges Catalog 1816-3/US 145 Butt Hinge 40 M8 Hex Nut[24-708-8]DoubleT-Nut M8/40[20-050]M8 x 12 BHCS[24-112-8]Ø8.519 ApplicationSteel hinge for constructing profile framed doors or panel doors. Available in medium and heavy duty version. Technical DataSteel, Zinc Plated or Black Powdercoat.Recommended Fastening Hardware (Order Separately)Attachment to T-Slot MountingScrewsT-NutsHex NutsTo 40 Series (Per Hinge Side)(2) 24-112-8(1) 20-050—To Panel (Per Hinge Side)(2) 24-112-8—(2) 24-708-8Ordering InformationDescription Unit Weight Part # (Clear) Part # (Black)Steel Hinge, Heavy Duty 40 Each 160 g 23-011 23-011BLift-Off Hinge 40Technical DataZinc die cast, black powder coatPin: St., zinc platedMaximum torque 100 Nm (74 ft-lbs)Order all hardware separately.Attachment to 40 series profiles ScrewsT-Nuts24-216-620-056 or 20-080ApplicationVersatile hinge for 40 series profiles. For lift-off and non-removable door configurations. Two T-slot alignment blocks are included.Ordering InformationDescription Unit Weight Part #Lift-Off Hinge 40 Left 1 set 70 g 23-440LLift-Off Hinge 40 Right 1 set 70 g 23-440R 12 180Ëš 40Ëš1 Lift-Off Door (load supported by two hinges)2 Non-removable door (load supported by one hinge)3 Range of swing323-01123-011B 4367.031.045.06.021.521.5 Hinges 40 76 40 76 2.8 13.5 23-440 43 67.0 31.0 45.0 6.0 21.5 21.5 144 Industrial Profile SystemsHandles & Hinges Catalog 1816-3/US 145Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Dimensions (mm or inch)Series A B C ∅D ∅E F40 40 30 9 40 8.5 6028/30 28 22.5 7 27 8.3 451.5″ 1.57″ 1.18″ 0.16″ 1.34″ 0.335″ 2.36″1″ 1.10″ 0.89″ 0.28″ 1.04″ 0.260″ 1.78″ ApplicationFor connecting profiles at various angles from 0O to 180O. Eliminates the need for a miter cut. Die cast inserts provide alignment with the profile end and prevents rotation.Technical DataZinc Die-Cast, GalvanizedFinishes available: Clear or Black.Order all hardware separatelyOrdering InformationSeries Description Unit Weight (Clear) (Black)40 Pivot Joint Each 0.37 kg 23-010 23-010B Pivot Joint w/Clamp Handle Each 0.41 kg 23-014 23-014B30, 28 Pivot Joint Each 0.11 kg 23-013 23-013B Pivot Joint w/Clamp Handle Each 0.18 kg 23-015 23-015B1.5″ Pivot Joint Each 0.32 kg 23-262 Pivot Joint w/Clamp Handle Each 0.41 kg 23-2631″ Pivot Joint Each 0.11 kg 23-260 Pivot Joint w/Clamp Handle Each 0.18 kg 23-261Recommended Fastening Hardware (Order Separately) SeriesAttachment to T-SlotAttachment to End of ProfileScrewsT-NutScrews4024-116-820-05824-120-828/3024-312-820-05724-320-81.5″25-110-525-002, 20-082 or 20-18225-112-51″25-108-425-031, 25-034 or 25-03625-112-4Pivot Joint23-010 23-01323-26023-26223-014 23-01523-26123-263 D B C E A Attaching Pivot Joint 40to 40 series profiles Load F1 (N) F2 (N)23-010: Pivot Joint 40Fixed connection 5000 2500 Movable connection 750 75023-013: Pivot Joint 28Fixed connection 1600 800 Movable connection 250 250 Attaching Pivot Joint 28to 28 series profiles M8x16 BHCS[24-116-8]M8x20 BHCS[24-120-8]PIVOT JOINT 40[23-010]M8 T-NUT[20-058] M8 T-NUT 28[20-057]M8x12 SHCS[24-312-8]M8x20 SHCS[24-320-8]PIVOT JOINT 28[23-013] F Pivot joint as a gusset Pivot Joints 146Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsHandles & Hinges Catalog 1816-3/US 147 40 Series Cam35-10[23-140z5] HookedCam[23-142z1]0-12mm KeeperBracket[23-140z7] (2)M5x16BHCS[24-116-5](2)M5FlatWasher[24-700-5](2)M5T-Nut[20-052] 40Series1.6-3.2mm IncludedwithHandle Cam35-10 [23-140z5] 40Series BackingPlate(orderseparatelypage134)[23-038z1] M6x12FHCS[24-212-6] L-Handle-Locking[23-038] M6T-Nut[20-056] Ø22.5±0.5 Machiningforanyofthequarterturnlocks.ApplicationUsed for swinging, sliding or bi-fold door applications. Latch mounts through machined hole in extrusion.Technical DataHandle: Polyamide, BlackHousing/Insert: Zinc Die Cast, Black Powdercoat.Ordering Information Profile Series Description Unit Weight Part # 40 L-Handle, Locking1* Each 201 g 23-038 L-Handle, Non-Locking* Each 201 g 23-039 T-Handle, Non-Locking* Each 200 g 23-133 Wing Knob, Locking1* Each 160 g 23-134 Square Insert2,3* Each 50 g 23-135 28/30 L-Handle, Non-Locking* Each 201 g 23-041 L-Handle, Locking1* Each 201 g 23-0401. All locks come keyed alike except 28 Series; special keying options available as special order. 2. Additional style inserts are available as special orders. 3. Order key separately (see page 138). * Includes 23-038Z3 KeeperQuarter Turn Extrusion Mount 105 40 Ø32 50 M22x1.5 78 38 27 50 M22x1.532 50 20 50 M22x1.5Ø32 Ø32 6 50 M22x1.523-13523-13423-13323-03823-039Latches 146 Industrial Profile SystemsHandles & Hinges Catalog 1816-3/US 147Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA 160 23 28 11.5 Ø6 ApplicationUsed for swinging or sliding door applications. Latch mounts directly to panel. Ordering InformationDescription Unit Weight Part #T-Handle, Non-Locking Each 135 g 23-143Wing Knob, Locking1 Each 90 g 23-144Square Insert2 Each 50 g 23-1451 All Locks come keyed alike; special keying options available as special order. 2 Additional style inserts are available as special orders. 3. Order key separately (see page 138). 40Series Cam45-2[23-140z4]3-8mm 1.2-8mm 16 3-8mm Cam35-10[23-140z3]1.2-8mm 10 Series Ø22.5 Machiningforanyofthequarterturnlock.25 25 Multibock40[22-115]Addamultiblockasadoorstopforpaneldoors.30/28 QuarterTurnHandle L-Handle,Locking[23-039]InsidehandleshownincombinationwithaL-HandleLocking. ApplicationCan be combined with any of our quarter turn handles to extend operation to inside of door. Technical DataPolyamide, RedRequires screw and 2 washers.Ordering Information Description Unit Weight Part #Inside Handle Each 0.9 g 23-159Technical DataHandle: Polyamide, Black Housing/Insert: Zinc Die Cast, Black Powdercoat.Quarter Turn Panel Mount23-143 78 27 38 18 32 M22x1.523-144 50 Ø32 M22x1.520 18 Ø32 M22x1.56 18 23-14523-159Inside HandleSuggested Fastening Set (Order Separately) With Outside HandleScrewWashers23-038, 23-039, 23-13324-345-624-707-6, 24-711-623-040, 23-04124-335-624-707-6, 24-711-6Latches 148Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsHandles & Hinges Catalog 1816-3/US 149 Ordering Information Description Unit Weight Part #Cam 35-10 (offset 8) Each 22 g 23-140Z3 Cam 35-16 (offset 2) Each 22 g 23-140Z4 Cam 35-8 (offset 10) Each 18 g 23-140Z5 Cam 35-20 (offset -2) Each 20 g 23-140Z6Hooked Cam Each 13 g 23-142Z1Spare Key for 23-038/23-040 & 23-134/23-144 Each 4 g 23-140Z1 Square Key for 23-135/23-145 Each 4 g 23-140Z2 DoorStop-Straight [23-125]Addadoorstoptoswingingdoortocreateapositivestop. ApplicationVarious cams and keys for the quarter turn latches. You must order one cam per quarter turn lock. Ordering Information Unit Weight Part #Keeper Bracket Each 13 g 23-140z7ApplicationKeeper brackets are used with a hooked cam on bi-fold or sliding doors.Technical DataAluminum, Clear AnodizedRecommended Fastening Hardware (Order Separately) ScrewsT-Nut24-212-520-052Ordering Information Unit Weight Part #Backing Plate Each 4.5 g 23-038z1ApplicationBacking plates can be added to a quarter turn latch and provide a positive stop for the door.Technical DataSteel, Matte Black Powder Coated Part # Dimension A23-140Z3 823-140Z4 223-140Z5 1023-140Z6 -2 Cams & Keys 7 19 4 33 19 32 16 38 12 18 3 Ø5.5 Backing PlateKeeper Bracket23-140z423-140z523-140z623-142z123-140z723-038z1 683 54 5019ForM5FHCSØ32Latch Accessories 4420354ARecommended Hardware (order separately) SeriesScrewWasherT-NutMetric24-116-524-700-520-052Inch25-110-225-700-225-009 or 25-088 148 Industrial Profile SystemsHandles & Hinges Catalog 1816-3/US 149Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USATechnical DataDie-Cast Zinc, ClearOrdering Information Series Description Unit Weight Part #40, 30 & 28 Dead Bolt Latch Each 9 g 23-160ApplicationDesigned to secure doors using a spring loaded latch mechanism. Combine with a door stop for an effective latching solution. 23-160Deadbolt 40Series M6T-Nut[20-056] DeadBoltLatch[23-160] M6x16BHCS[24-116-6] 5 38 28 38 20 12 Ø6.6 25.4 Door LatchesRecommended Hardware (order separately) Profile SeriesScrews (4)T-Nut (4)4024-116-620-05628/3025-108-425-0311.5″25-110-425-001, 20-083 or 20-1931″25-108-425-031, 25-034 or 25-036 Slam Latch 20 30 35 66 53 1/4-20×11/4″SHCS[25-320-4] 56 12.2 Ø0.28THRUØ0.440.50 23-15523-156Technical DataDie-Cast Zinc, BlackRecommended Fastening Hardware (Order Separately): 25-320-4Ordering Information Description Unit Weight Part #Slam Latch – Locking* Each 1.25 lb 23-155Slam Latch – Non-Locking Each 1.25 lb 23-156 *All locks come keyed alike; special keying options available as special order.ApplicationHigh strength latch designed to securely close door to the frame. An optional key locking version is available for extra security. 80 75 65 150Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsHandles & Hinges Catalog 1816-3/US 151 Bracket Use w/CatchDescriptionThreadUnitWeightPart #23-046Single Bracket 40M6Each60 g27-146 Magnetic Catches 32 2.8 19 27-14623-05123-04523-046ApplicationQuick catch for swinging or sliding doors. For different holding strengths, rotate catch 180O. Adjustable mounting position using slotted holes and appropriate mounting bracket if needed. Complete with pan head screw, or add optional plate for smooth mountingTechnical DataMagnetic Catch: Glass Filled NylonStrike Plate: Steel, Zinc Plated with pressure sensitive adhesive backing.Mounting Bracket: Aluminum, Clear Anodized.Recommended Fastening Hardware* (Order Separately) SeriesScrewsT-Nuts40(2) 24-120-6(2) 20-05628/30(2) 24-316-6(2) 20-09020(2) 24-110-4(2) 20-0441.5″25-112-425-001, 20-083 or 20-1931″25-108-225-030, 20-088 or 25-035Ordering Information SeriesABCDEFGHWeightPart # 40, 30, 28, 1.5″40201018.3227.83012.9M5x1238 g23-04620, 1″281461217207.7M4x59 g23-045AllSee drawing8 g23-051 Fastening Set[20-027]314 max. M6 EconomyT-Nut[20-090] x 2M6 x 16 SHCS[24-316-6] x 28 max. XY 12341 Mounting of 40 Series profile2 Mounting of 28 Series profile3 Assembly of Bracket on 40 Series profile4 Holding force Holding Force X 20N (4.5 lb) Y 10N (2.25 lb) Door Catches H E G F C B D A 30.0 37.0 50.8 38.1 38.1 11.0 20.2 28.0 24.1 2X M8 T-Nut[20-058] 2X BHCS M8X18[24-118-8] Catch Bracket[27-146] 2X BHCS M6X16[24-116-6] Magnetic Catch[23-046] M5 Z-Nut[20-035] 150 Industrial Profile SystemsHandles & Hinges Catalog 1816-3/US 151Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USABall Catch PA B A48 20 28 Ø6.5 10 16 37 2627-14623-04323-121 M6x201 min.14 max. ApplicationCatch for use on swinging and sliding doors. Brackets can be used to mount the catch in the location that you desire. Recommended Fastening Hardware (Order Separately) Part #ScrewsT-Nuts23-043 + 27-146(2) 24-114-8 and (2) 24-114-6(3) 20-05823-043 only(2) 24-114-6(1) 20-05623-121 + 27-146(2) 25-110-5 and (2) 25-112-4(2) 25-002 or (1) 25-042 plus (1) 25-001Ordering Information SeriesDescriptionA (Hex)B (Thread)UnitWeightPart #40Ball Catch13M8Each23 g23-04340/1.5″Ball Catch1/2″1/4-20Each29 g23-1211 Attachment to a sliding door2 Attachment to a swinging door3 Mounting dimensions 123Technical DataHousing: Glass-filled Nylon, Black Ball Screw: Stainless Steel Bracket: Aluminum, AnodizedHolding Force: 6.7 – 11 lbs max. 522max. 8 M8101-2 Door Catches 30.0 37.0 50.8 38.1 38.1 11.0 20.2 28.0 24.1 3X M8 T-Nut[20-058] 2X BHCS M8X1 8 [24-118-8] 2X BHCS M6X16[24-116-6] Ball Catch[23-043] Catch Bracket[27-146]Bracket DescriptionThreadUnitWeightPart #Catch Bracket 40/1.5″M6Each60 g27-146 152Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsHandles & Hinges Catalog 1816-3/US 153 23-004 Machining 23-012 MachiningM3 ThruM4 Thru39.849.8Mill Slot50x9.5x9DpMill Slot60x12x4.5DpDoor Catches 4.3mm to 7mm Range 3mm to 5mm Range Ø0.50″ Ø0.375″ ApplicationAn economical solution to hold swinging doors closed. The ball plunger presses easily into a machined hole in the extrusion, and the force of the ball in combination with a T-Slot on the door frame holds the door closed.Technical DataHousing: Steel, Black OxideBall: NylonOrdering Information Profile Series Description Unit Weight Part # 40, 30 Ball Plunger, ½” Dia. x 28mm Each 22.7 g 23-129* 28 Ball Plunger, 3/8″ Dia x 18mm Each 13.6 g 23-128** Requires service 19-022 Part#Holding Force23-1285-14 lbs.23-1298-18 lbs. 40 Series Std28, 30 Series 40 Series Std28, 30 Series 131 3-Way Ball Catch on swinging door2 3-Way Ball Catch on sliding door3 Servicing of the slot for 23-004 on 40 Std or 28/30 series profiles for sliding doors. For 40 series Heavy or Light profiles mill slot 58×9.5×12.3 Dp.ApplicationUniversal door catch for swinging and sliding doors in small and medium load ranges. Can be mounted in serviced slot for flush closing.Technical DataBrass, chrome finish with two steel balls for adjustable spring tensionOrder all hardware separately Part # 23-004(4) 24-210-3Part # 23-012(4) 24-208-4Description Unit Weight Part # 3-Way Ball Catch, Small 1 set 26 g 23-0043-Way Ball Catch, Medium 1 set 40 g 23-0122Ball Plungers 0.50″ 28 2.8 4.1 Ø11.2 0.375″ 18.3 2.8 0.72 Ø7.9 23-12823-1293-Way Ball Catch23-00423-012 For M4 FHCS For M3 FHCS 152 Industrial Profile SystemsHandles & Hinges Catalog 1816-3/US 153Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USALight Duty Door Stops23-12423-12523-158* 25.4 Ø7 51 51 6.5 13 11 Technical DataAluminum, Clear Anodized with Velcro® PadOrdering InformationDescription Unit Weight Part #Door Stop – Straight Each 91 g 23-124Door Stop 40, 30 – Angle Each 91 g 23-125Velcro® Plate Each 9 g 23-158ApplicationDoor Stops provide a positive stop to keep the door lined up with a frame. An optional Velcro® plate can be added to create a light-duty catch.Recommended Fastening Hardware (Order Separately) Profile SeriesFastener Part #23-124Part # 23-125Part # 23-15840/301.5″Screws25-114-425-210-425-208-2T-Nuts25-001 or 20-08325-001 or 20-08325-009 or 20-08828Screws25-112-425-208-425-208-2T-Nuts25-05525-05520-0381″Screws25-112-425-206-225-206-2T-Nuts25-031 or 25-03425-030 or 25-03525-030 or 25-035 Min 40Series-5.5mm28Series-4mm 40Series OptionalVelcroPlate®[23-158] DoorStop-Straight [23-124] 28Series DoorStop28-Angle[23-126] OptionalVelcroPlate®[23-158] Door Stops* For wider surfaces, use 22-145 and apply velcro strip. Order hardware separately. 51 44.5 44.5 25.4 30 For 1/4-20FHCS4.75 19 3.3 38 51 For #10-32FHCS 154Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsHandles & Hinges Catalog 1816-3/US 155 Notes 154 Industrial Profile SystemsFeet & CastersCatalog 1816-3/US 155Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Leveling Feet 156-157Anti-Vibration 158 Bolt Down 158 Knuckle Feet 159-160 Knuckle Foot Accessories Rubber Insert 161 Clamping Shoe 161Corner Mounting Plate 161L-Base Leveling Foot 162Floor Anchor 162Floor Brackets 163Economy Floor Brackets 164 Flange Feet 165Hollow King Pin Casters 167Threaded Casters 168Top Plate Casters 169Floor Lock 169Adapter Plates 170Base Plates 171Base Plates (SMART) 172 Section 6Feet & Casters Contents 156Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsFeet & CastersCatalog 1816-3/US 157 Leveling FootLeveling Foot 2021-00121-001-3021-007ApplicationFor leveling tables and light equipment stands. Ratchet-type adjustment on 21-001 requires no tools. 21-001-30 is height adjustable by hand or with tools.Ordering Information SeriesABCDminDmaxMax Load N (lbs)Weight (g)Part #40M8x16403940651500 (337)6821-00130M8x16303037501500 (337)4721-001-30ApplicationFor leveling of light duty structures constructed of 20 series profiles Technical DataBase – Glass-filled nylon (Black) Spindle, nut & disk – Steel, Zinc Plated Ordering Information Profile Dimensions Max Load Weight Series A B C Dmin Dmax N (lbs) (g) Part # 20 M5 37 18 12 27 1000 (225) 12 21-007Mounts to end of 20 Series profile with machining 19-012Fastens to T-Slot using 20 Series T-Nuts B B C AD D B C A Leveling FeetTechnical Data21-001Base – Glass-filled nylon (Black) Spindle, nut & disk – Steel, GalvanizedMounts to end of 40 Series profile with machining 19-012. Fastens to T-Slot using 40 Series T-Nuts21-001-30Base – Glass-filled nylon (Black) Spindle, nut & disk – Steel, Zinc PlatedMounts to end of 30 Series profile with machining 19-012. Fastens to T-Slot us-ing 30 Series T-Nuts 156 Industrial Profile SystemsFeet & CastersCatalog 1816-3/US 157Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USALeveling FeetLeveling Feet A C B D Adjustabl e Range A B C D AdjustableRange 21-41221-41321-41421-41021-411Ordering InformationNote: Mounts to end of 80×80 profile with machining 19-010 (4 times) and mounted to base plate 21-028ApplicationFor leveling of heavy duty structures constructed of 80 x 80 profilesTechnical DataBase: 21-015: Nylon with Non-skid Pad Spindle & Nut: Steel, Yellow Zinc PlatedBase: 21-224: Yellow Zinc Plated Steel Spindle & Nut: Steel, Yellow Zinc Plated Profile SeriesDimensionsLoad (kg)Weight (g)Part #ABCDE40M208951762781832621-01540M2089517627335077121-22421-01521-224 51.0 [2.01]91.0 [3.58]78.0 [3.07]M20x2.5 – 6g Ordering InformationApplicationFor leveling of light duty structures. Constructed with a delrin base to protect the surface against scratching.Technical DataBase: Delrin (White)Stud: Steel, Black Profile SeriesDimensionsLoad (kg)Weight (g)Part #ABCD minD max1″1/4-201.94″1.00″0.70″1.44″912721-4101.5″, 1″3/8-162.88″1.25″0.88″2.38″1365421-411Dmin is without nut. 21-411 can be used on either 1″ or 1.5″ Profiles with a baseplate. Ordering InformationApplicationFor leveling of structures with high load capacity. Profile SeriesDimensionsLoad (kg)Weight (g)Part #ABCD minD max1″1/4-201.94″1.00″0.625″1.44″4544521-4121.5″, 1″3/8-162.88″1.25″0.88″2.38″170410021-4131/2-133.13″1.88″1.13″2.63″227321821-414Dmin is without nut.21-413 & 21-414 can be used on either 1″ or 1.5″ Profiles with a baseplate. Technical DataSteel A C B D E 158Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsFeet & CastersCatalog 1816-3/US 159 Anytypeof5/16Bolt ApplicationLeveling foot with holes to allow you to bolt structure directly to the floor or desired surface. Dimensions Weight A B C D E (kg) Part # 1/2 -13 3.94 3.15 2.60 2.17 0.22 21-420 5/8-11 3.94 3.94 2.60 2.91 0.27 21-421 Technical DataBase – Glass filled Nylon, Black Thread & Nut – Steel Galvanized, BlackMax Load – 1100 lbs AntivibePad 1/2″JamNut BasePlate1.5×3,1/2-13[21-1530-08] 1.5″SeriesandAppropriateFasteners ApplicationLeveling foot with an anti-vibration pad to reduce transmitted vibration for high precision machinery.You should use the mount which has the maximum load range which comes closest to the specific weight required for your need. This will reduce 98% of the transmitted vibration on most machinery.Technical DataLow Carbon Steel Yellow Zinc Plated Anti-Vibration Pad Rubber Part #Max Load per Mount21-42212021-42324021-4242400Ordering Information Description Unit Weight Part #Anti-Vibe 1/2-13, Light Each 0.37 kg 21-422Anti-Vibe 1/2-13, Medium Each 0.37 kg 21-423Anti-Vibe 1/2-13, Heavy Each 0.30 kg 21-424 B C A D E Ø0.35421-42021-421Bolt Down 21-42221-42321-424Anti-Vibration 4.12″ 1.88″ 2.00″ 1/2-13Ordering Information Leveling Feet 158 Industrial Profile SystemsFeet & CastersCatalog 1816-3/US 159Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAApplicationAdjustable height leveling foot for heavy and medium structures such as machine bases and assembly tables.For 1″ Series, a base plate must be used. See page 172. Ordering Information Profile SeriesDimensionsMax LoadN (lbs)Weight (g)Part #ABCDminDmax40M8603932501500 (337)3721-008M8803932651500 (337)4321-009M10803934651500 (337)6621-01228/30M8702930583000 (674)2021-0101.5″5/16-182.40″1.50″1.31″2.00″1500 (337)3621-4015/16-183.15″1.50″1.31″2.50″1500 (337)4121-4021″3/8-163.15″1.50″1.38″2.50″1500 (337)6821-403M8 or 5/16-18 thread mounts to end of profiles with machining 19-016.M10 or 3/8-16 thread mounts to end of 40 Series profiles with machining 19-017.Fastens to T-slot using 30 Series T-nuts. BOTTOM OF PROFILEIS TAPPED TO ACCEPTSCREW OF KNUCKLE FOOTKNUCKLE FOOT 40 Technical DataBase – Glass-filled nylon (Black) Spindle, nut & disk – Steel, GalvanizedSelf-aligning leveling adjustment has a maximum tilt of 15° via ball and socket. 2 Knuckle FeetKnuckle Foot21-00821-00921-01221-40121-40221-40321-010 B D A C C D B A 160Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsFeet & CastersCatalog 1816-3/US 161 Knuckle Foot 80Knuckle Foot 1.5 C D B A ApplicationAdjustable height leveling foot for heavy duty structures. Require appropriate base plate for mounting. Technical DataBase – Zinc Cast Spindle & Nut – Steel, GalvanizedOrdering Information SeriesABCDminDmaxMax Load N (lbs)Weight (kg)Part #40M1210076418010,000 (2250)0.2921-013M12160764114010,000 (2250)0.3321-014M1610076458010,000 (2250)0.3621-016M16160764514010,000 (2250)0.4421-018Mounts to end of 40 Series profile with M12 or M16 machining 19-014 M8 T-NUT[20-058]M8x18 BHCS[24-118-8]RUBBER INSERT 80[21-020] BOTTOM OF PROFILE IS TAPPED TOACCEPT M8SCREWS SeriesABCDminDmaxMax Load N (lbs)(kg)Part #1.5″1/2-134.003.001.633.1510,000 (2250)0.2921-4041/2-136.303.001.635.5010,000 (2250)0.3321-4055/8-114.003.001.813.1510,000 (2250)0.3621-4065/8-116.303.001.815.5010,000 (2250)0.4421-407Leveling Feet 160 Industrial Profile SystemsFeet & CastersCatalog 1816-3/US 161Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA 150 76 R32 Ø 14 70 15 22.5 ApplicationFor vibration-dampening and floor protection with the Knuckle Foot 80 or Knuckle Foot 1.5. Technical DataRubber (Black) Hardness 80o Shore AOil and water resistantRubber InsertOrdering Information Description Unit Weight Part #Rubber Insert 80 Each 50 g 21-020Clamping ShoeApplicationClamps Knuckle Foot 80 or Knuckle Foot 1.5 to Floor Technical DataZinc, Black Powder-coat 3000 kg Max LoadOrdering Information Description Unit Weight Part #Clamping Shoe 80 Each 0.47 kg 21-021Floor Fastening Set Each 0.50 kg 21-03221-02121-020 Ø 71 3 18 Corner Mounting PlateApplicationMounting plate for knuckle feet for leveling structures and/or permanent placement of structures.Technical DataAluminum, Black FinishRecommended Fastening Hardware (Sold Separately) SeriesScrewsT-NutsSet40(2) 24-350-8(2) 20-05821-031M1.5″(2) 25-332-5(2) 25-00221-031EOrdering Information Series Description Unit Weight Part # 40/1.5″ Corner Mounting Plate* Each 0.75 kg 27-030 Profile Fastening Set (Metric) Set 60 g 21-031M Profile Fastening Set (English) Set 60 g 21-031E * Requires tap service on ∅8.5mm hole 19-014 Leveling Feet Accessories 230 19 35 115 ∅8.53 27-030 CornerMountingPlate[27-030] M8 X 50 SHCS[24-350-8] M8 T-Nut[20-058] 162Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsFeet & CastersCatalog 1816-3/US 163 Leveling Foot C E A D B F Floor Anchor C D E A B F Min Max ApplicationLeveling foot for light and heavy duty equipment. Height is adjustable by leveling screw, which is accessed from the top. Profile SeriesDimensionsAdjustmentWt.(kg)Part #ABCDEFMinMax401604060120108.310750.2821-02230120304581108.38.5310.2221-022-3028120304581106.48.5310.2221-022-281.5″6.30″1.57″0.36″4.72″0.394″0.331″0.394″2.00″0.2821-4151″4.72″1.18″1.77″3.19″0.394″0.252″0.335″1.125″0.2221-416ApplicationFor attachment of light equipment to floors or mounting surfaceAll fastening hardware to attach to profile is included. Technical Data21-022Base – Zinc Cast, Black Powdercoat Max Vertical Load – 10,000N (2,250 lbs)All fastening hardware to attach to profile is included. Ordering InformationTechnical DataZinc Cast, Black Powdercoat Includes all fastening hardware.Ordering Information Profile SeriesDimensionsWeight(kg)Part #ABCDEF401604060120108.30.2821-02330120304581108.30.2221-023-3028120304581106.40.2221-023-281.5″6.30″1.57″2.36″4.72″0.394″0.331″0.2821-0601″4.72″1.18″1.77″3.19″0.394″0.252″0.2221-061L-Base Feet 162 Industrial Profile SystemsFeet & CastersCatalog 1816-3/US 163Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAApplicationEconomical bracket for mounting structures to floor or mounting surfaceOrdering Information SeriesABCDEFG∅HWt. (kg)Part #40, 1.5″14277938408210100.2827-05714277976408210100.5727-05830/28, 1″142779282825.48210970.1927-05914277950.82825.48210970.3527-060 Technical DataAluminum, Clear AnodizedMetric series hole dia. is 8.8mm. Inch series hole dia. is 0.28″.Recommended Hardware SeriesScrewsT-NutsDouble T-Nuts*4024-118-820-05820-0503024-118-820-05820-0502824-116-820-057 or 20-091—1.5″25-112-525-002, 20-082 or 20-18225-041 or 25-0461″25-110-425-031 or 25-034— 40SeriesM8DoubleT-Nut[20-050]FloorMounting[21-058]M8x18BHCS[24-118-8]Bracket8028SeriesMounting BracketsFloor Mounting Brackets27-05827-06027-05727-059 A E F D G H C B 42 20 A F E E H G D C B 42 20 164Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsFeet & CastersCatalog 1816-3/US 165 Economy Floor Mounting BracketsMounting Brackets 40 120 140 B A 6 ∅C 36 ∅D 40120140BA6∅C36∅D Ordering Information ProfileStyleAB∅C∅DWeightPart #40Single36.018.09.013.5115 g28-505Double76.040.09.013.5245 g28-51030Single27.013.57.011.087 g28-503Double57.030.07.011.0185 g28-50820Single18.09.05.59.060 g28-501Double38.020.05.59.0125 g28-5061.5″Single34.017.09.013.5108 g28-504Double72.038.09.013.5230 g28-5091″Single23.011.57.09.075 g28-502Double48.025.17.09.0156 g28-507ApplicationEconomical light duty floor mounting brackets for 20, 30, 40, 1″ and 1.5″ Series profiles. Securely mounts structures to floor or mounting surface.Technical DataAluminum, AnodizedRecommended Hardware SeriesScrewsT-Nuts4024-116-820-058 or 20-0813024-114-620-056 or 20-0902024-112-520-045 or 20-0851.5″25-112-525-002 or 20-0821″25-108-425-031 or 25-034 40120140BA6∅C36∅D 40 120 140 B A 6 ∅C 36 ∅D 28-50128-50228-50328-50428-50528-50628-50728-50828-50928-510 164 Industrial Profile SystemsFeet & CastersCatalog 1816-3/US 165Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Flange Feet27-05027-05627-055Flange MountingApplicationHeavy duty flange foot for attaching structures to floor. Tapped holes in base can be used for leveling.Universal Flange Feet are machined to accommodate both the 40 and 1.5″ Series profiles only.Technical DataSteel, Black Finish Profile SizeDimensions (mm)Weight (kg)Part #ABCDE∅FKLMN40 x 401.5″ x 1.5″12512512810010014.35050——1.5527-05080 x 403″ x 1.5″16512712510014014.350504038.12.1927-05580 x 803″ x 3″16516512514014014.325504038.12.7927-056Ordering Information 80x40Profile FlangeFoot80x40[27-055] M8x25BHCS[24-125-8] M10TapforLevelingScrew ThruHoleforFloorMountingSet Order Hardware SeparatelyFor clamping Profile use 24-125-8 or 25-116-5For Leveling use 24-525-10FFloor Fastening Set 21-032 includes wedge anchor, washer and hex nut. K L M C 6.4 E A D B K L N M8 5/16-18 166Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsFeet & CastersCatalog 1816-3/US 167 Caster Quick Reference TypeLoad Capacitykg (lbs)Wheel Wheel Dia. (mm)Wheel Width (mm)Total Height(mm)Wheel CenterWeight(kg)Part #Hollow King PinSwivel40 (88)Rubber Grey Non-Marking501968Pressed Steel0.2121-300Swivel40 (88)Rubber Grey Non-Marking501968Pressed Steel0.2421-301Swivel80 (175)Neoprene Rubber, Black7525100Pressed Steel0.3921-310Threaded StemSwivel91 (200)Hard Rubber12532162Solid Rubber1.0421-314Swivel91 (200)Hard Rubber12532162Solid Rubber1.221-315Leveling600 (set of 4)Nylon501882Pressed Steel0.821-323Leveling1200 (set of 4)Nylon6230102Pressed Steel1.221-327Top PlateSwivel102 (225)Grey Poly7632112Pressed Steel0.7121-303Swivel102 (225)Grey Poly7632112Pressed Steel0.8821-304Rigid102 (225)Antistatic Grey7631119Pressed Steel0.321-302Rigid136 (300)Hard Rubber Grey12732165Solid Rubber0.9221-311Swivel136 (300)Blue Grey Rubber12532165Pressed Steel1.1421-312Swivel136 (300)Blue Grey Rubber12532165Pressed Steel1.2921-313Swivel410 (900)Purple Poly15251191Pressed Steel2.221-318Swivel410 (900)Purple Poly15251191Pressed Steel2.621-319Leveler600 (set of 4)Nylon501882Pressed Steel0.821-324Leveler1200 (set of 4)Nylon6230102Pressed Steel1.221-328Floor 182 (400)Vulcanized Rubber Pad——165 ret.196 ext.Pressed Steel 2.121-325Casters 166 Industrial Profile SystemsFeet & CastersCatalog 1816-3/US 167Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAHollow King PinApplicationCasters designed for light and medium duty applications with ratings up to 91kg (200lbs). Mounting surface is a hollow king pin with ball bearing swivel. Load Cap. Dimensions (mm) Weight kg (lbs) Wheel D W H R T D1 Locking (kg) Part # 40 (88) Rubber Black Non-Marking 50 (2″) 19 68 50 7.8 10.2 None 0.21 21-300 40 (88) Rubber Black Non-Marking 50 (2″) 19 68 70 7.8 10.2 Wheel 0.24 21-301 80 (175) Neoprene Rubber, Black 75 (3″) 25 100 100 7.8 10.2 Total Lock 0.39 21-310 Ordering Information 40Series HollowKingPinSwivelCaster LockWasher BHCS 40Series BasePlate T-Nut BHCS LockWasherand BHCS R H D W T D1 Technical DataHousing: Pressed Steel, Zinc Chromated. SwivelSwivel w/BrakeCasters 168Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsFeet & CastersCatalog 1816-3/US 169 Ordering Information Load Cap Dimensions (mm) Wt. kg (lbs) Wheel W D H R D2 L Wheel Center Lock (kg) Part # 91 (200) Hard Rubber 32 125 (5″) 162 106 M10 38 Pressed Steel None 1.04 21-314 91 (200) Hard Rubber 32 125 (5″) 162 106 M10 38 Pressed Steel Total Lock 1.20 21-315 272 (600)* Nylon 73 50 (2″) 82 104 M12 19 Pressed Steel Leveler 0.80 21-323 545 (1200)* Nylon 88 62 (2.5″) 102 128 M12 19 Pressed Steel Leveler 1.20 21-327* Set of 4ApplicationCasters designed light to heavy loads. A wrench fits easily on the swivel to allow installation to a base plate. 21-323 and 21-327 are leveling casters with adjustable pad. Technical DataHousing: Pressed Steel, Ball Bearing Swivel Head.Order hardware and base plates separately R H D W D2L w R L H A Threaded Casters M12 (METRICTHREAD)SwivelSwivel w/BrakeLevelingCasters 168 Industrial Profile SystemsFeet & CastersCatalog 1816-3/US 169Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA 21-325 Plate Type CastersSwivelSwivel w/BrakeRigidLevelingCastersApplicationTop plate casters are great for all types of loads and applications. The caster bolts directly to the appropriate extrusion T-Slot or the end of a profile using an adapter. Technical DataHousing: Pressed Steel, Ball Bearing Swivel Head.Order hardware and base plates separately. Locking foot 21-325 requires adapter plate 21-335. WTDHR R W H A D Ø8.8 B A BAFor M8BHCS B A Ø8.8 For M8 or 5/16 Screw73A32 54 A Ø8.8 B 32 B123456 101.6 114.3 66.8 B 75.2 A ∅11 W T D H R RWHAD TypeLockLoad Cap. kg (lbs)Wheel Dimensions (mm)Wt.(kg)Plate Dwg.Part #DWHRTABSwivelNone102 (225)Grey Poly76 (3″)32112809.475400.71521-303SwivelTotal102 (225)Grey Poly76 (3″)321121069.475400.88521-304RigidNone102 (225)Antistatic Grey76 (3″)31119–375400.30421-302RigidNone136 (300)Blue Grey Rubber125 (5″)32165–375400.92421-311SwivelNone136 (300)Blue Grey Rubber125 (5″)321651062.575401.14521-312SwivelTotal Lock136 (300)Blue Grey Rubber125 (5″)321651062.575401.29521-313SwivelNone410 (900)Purple Poly152 (6″)51 19112511.576-9267-762.20521-318SwivelTotal Lock410 (900)Purple Poly152 (6″)51 19118011.576-9267-762.60521-319LevelerFoot600 (Set of 4)Nylon50 (2″)73821046.2558580.80121-324*LevelerFoot1200 (Set of 4)Nylon62 (2.5″)891021287.2570701.20121-328*FootLocking182 (400)Rubber Pad––197––92672.14621-325Ordering Information* Requires special mounting plate. Adapter plates for inch profiles on page 172. Consult factory for engineering assistance for metric profile adapter plates. 170Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsFeet & CastersCatalog 1816-3/US 171 D D B A C C A E F21-50021-50121-50221-504Adapter PlatesOrdering Information Caster ABCDEF(kg)Part #21-3243.0″0.625″1.5″2.28″1/4-20for 5/160.6421-5003.0″0.625″1.0″2.28″1/4-20for 1/40.6521-50121-3283.5″0.625″1.5″2.76″1/4-20for 5/160.7521-50221-5044.50″0.63″1.5″3.00″3/8-16for 5/160.8521-504ApplicationUsed to mount heavy duty casters or floor locks to either the end of the extrusion or T-slots.Technical DataAluminum, Clear AnodizedRecommended Fastening Hardware (Order Separately) Mounting MethodScrewsT-NutsEnd of Extrusion25-114-5—T-Slot25-112-525-002 or 25-051 1.5″Series LevelingCasterAdapterPlate[21-500] 5/16-18×7/8″BHCS[25-114-5] 1/4-20×3/4″BHCS[25-112-4] 1.5″Series 1″SeriesLevelingCaster[21-324] Adapter Plates 170 Industrial Profile SystemsFeet & CastersCatalog 1816-3/US 171Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USABase Plates B C D E A B D E C D AApplicationBase plates are used primarily to mount leveling feet and casters on the end or side of an extrusion. These plates can also be used for mounting other parts such as lifting eyes.Technical DataAluminum, Clear AnodizedRecommended Hardware Mounting SeriesScrewsT-NutsMachiningAttached to Profile End30/2824-125-8—19-0102024-114-5—19-0101″25-112-4—19-009Attaching to T-Slot3024-116-820-058—2824-114-820-057—2024-112-520-045 or 20-085—1″25-110-425-031, 25-034 or 25-036— Profile SeriesDimensionsWeight(kg)Part #ABCDE30M860303015.90.2421-029-8M1060303015.90.2421-029-10M1260303015.90.2421-029-1228M85425.42815.90.1521-004M105425.42815.90.1521-005M125425.42815.90.1521-006M854542815.90.3021-204M1054542815.90.3021-205M1254542815.90.3021-20620M8404020120.8121-220-8M10404020120.8121-220-10M12404020120.8121-220-121″1/4-202.0″1.0″1.0″0.625″0.1521-1020-045/16-182.0″1.0″1.0″0.625″0.1521-1020-055/16-182.0″2.0″1.0″0.625″0.2421-2020-053/8-162.0″2.0″1.0″0.625″0.2421-2020-061/2-132.0″2.0″1.0″0.625″0.2421-2020-08Ordering Information BasePlate3″x3″[21-3030-06]5/16-18×7/8″BHCS[25-114-5]1.5″SeriesTapEndHole5/16-18×3/4″ M8x25 BHCS[24-125-8] M8 T-NUT ST[20-058] FOR 40 & 30 SERIES[20-057] FOR 28 SERIESM8x18 BHCS [24-118-8] FOR 40 SERIESM8x16 BHCS [24-116-8] FOR 30 SERIESM8x14 BHCS [24-114-8] FOR 28 SERIES Mounting Plates 172Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsFeet & CastersCatalog 1816-3/US 173 Mounting PlatesBase Plates(SMART)ApplicationSMART base plates are used primarily to mount leveling feet and casters on the end or side of an extrusion. These plates can also be used for mounting other parts such as lifting eyes. The SMART base plates adapt to both 40 and 1.5″ Series extrusions.Technical DataAluminum, Clear AnodizedOrdering InformationRecommended Hardware Mounting SeriesScrewsT-NutsMachiningAttached to Profile End1.5″25-114-5—19-0104024-125-8—19-010Attaching to T-Slot1.5″25-112-525-002, 20-082 or 20-182—4024-118-820-058, 20-081 or 20-181—27-003-xxx27-002-xxx27–002– M08CodeA ThreadM08M8M10M10M12M12M16M16M20M20E055/16-18E063/8-16E081/2-13E105/8-11 27–003– M08CodeA ThreadM08M8M10M10M12M12M16M16M20M20E055/16-18E063/8-16E081/2-13E105/8-11 38.1 76.2 15.9 ∅76.2 15.9 A A 40X80 1.5″X3.0″ 80X80 3.0″X3.0″ 27-002 27-002 27-003 27-003 172 Industrial Profile SystemsSpecial ApplicationsCatalog 1816-3/US 173Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Pneumatic Plates Connecting 176 Joining 177 Blank 178 Pneumatic Fasteners Universal 178 Butt 178 Pneumatic Seals 179Workstation Components Bins 181 Adjustable Bin Mounting 182 Drawers 183Tool Runner 183Lift Systems Two-Cylinder 184 Four-Cylinder 185 Section 7Special Applications Contents 174Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsSpecial ApplicationsCatalog 1816-3/US 175 Pneumatic ProfilesApplicationThe cavity within a profile can be used to distribute compressed air as well as provide structural foundation for the system application. Connections may be made at any location using the proper accessory component and machining. Many of the profile configurations also provide for multiple channels allowing for the complete distribution of compressed air in complex systems.Available Profiles Part #DescriptionAvailable Air ChannelsStructural PropertiesWeight[kg/m]PageIx [cm4]Iy[cm4]Wx[cm4] Wy[cm4]Section[cm2]10-080Profile 80X40 Standard171.7917.2317.998.6211.533.182611-080Profile 80X40 Heavy1102.0026.7325.5013.3716.594.582610-088Profile 80X80 Standard1138.30138.3034.5834.5820.175.452711-088Profile 80X80 Heavy1185.20185.2046.3046.3026.017.022710-120Profile 120X40 Standard2220.5424.2236.7612.1116.124.352811-122Profile 120×80 Heavy4575.07274.4692.7568.6140.0810.822710-164Profile 160X40 Standard3517.2533.1364.6516.5621.485.802811-140Profile 160X40 Heavy3749.5154.8093.6027.4032.308.722810-160Profile 160X80 Standard4922.50271.10115.3067.8038.1010.292911-160Profile 160X80 Heavy21215.79357.51151.9789.3851.7213.9629Cavity areas shown are in cm2 (1 cm2 = 0.155 in2)To calculate volume, multiply area by the profile length.10-080 11-080 10-088 11-08810-120 11-122 10-164 11-140 10-160 11-160Pneumatic Applications 174 Industrial Profile SystemsSpecial ApplicationsCatalog 1816-3/US 175Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USASample Testing Results ProfilePressureMediumPressurekPA (psi)Observation10-080Nitrogen6,900 (1000) No LeakageWater9,655 (1400)Profile Burst10-088Nitrogen6,900 (1000)No LeakageWater9,655 (1400)Profile Burst11-080Nitrogen6,900 (1000)No LeakageWater27,580 (4000)No Leakage11-088Nitrogen6,900 (1000)No LeakageWater10,345 (1500)Gasket LeakedPressure Ratings and Leak TestSafe Maximum Pressure Rating1725 kPa (250 psi)Supporting Pressure Rating DataProceduresStage 1A sample assembly was connected to a nitrogen cylinder. Pressure of 690 kPA (100psi) was applied. The holding button head screws were checked and tightened to a torque of 13.6 Nm (10 ft-lbs). Pressure was increased in stages to 6900 kPa (1000 psi) with continuous inspection for leaks. This was duplicated for each profile.Stage 2A sample was filled with water and pressure was applied in the same manner as in stage 1. Pressure was increased until a gaskets leaked or profiles burst. This was duplicated for each profile.Pneumatic Applications 176Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsSpecial ApplicationsCatalog 1816-3/US 177 Connecting Plates21-040zXApplicationConnecting plates provide threaded NPT ports and align with air chambers within properly machined profiles. Both styles are designed to be attached to the end face of the profile. The 80×80 plate can also be attached to the T-slotted side of a profile with an 80mm dimension. All plates include the appropriate sealing gasket. These plates can be used to seal end of profile by using appropriate plug.21-043zXTechnical DataPlate: Aluminum, AnodizedSeal: Neoprene or BunaRecommended Fasteners MountingHardware21-040zX21-043zXEnd Face MountScrew(2) 24-125-8(4) 24-125-8Side MountScrew—(4) 24-118-8T-Nut—(4) 20-058Ordering Information DescriptionAUnitWeightPart #Connector Plate 80×401/8″-27 NPT1 Set0.11 kg21-040z11/4″-18 NPT1 Set0.11 kg21-040z23/8″-18 NPT1 Set0.11 kg21-040z41/4″ BSPP1 Set0.11 kg21-040z61/2″-14 NPT1 Set0.11 kg21-040z8Connector Plate 80×801/2″-14 NPT1 Set0.23 kg21-043z21/2″ BSPP1 Set0.23 kg21-043z61″-11.5 NPT1 Set0.23 kg21-043z8Pneumatic Components 40 80 40 80 A FOR M8 BHCS 15.9 40 80 40 15.9 FOR M8 BHCS A 176 Industrial Profile SystemsSpecial ApplicationsCatalog 1816-3/US 177Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAJoining Plates21-04421-045ApplicationJoining Plates are used to join two profiles together while extending the compressed air cavity across the joint. These plates are available in in-line as well as “T” configurations. In-Line connections couple the end face of two profiles into a continuous straight section. “T” plates allow a profile to extend at a 90O angle. All Joining Plates come with the necessary seals for the intended application.Technical Data21-044: Steel, Galvanized21-045: Aluminum, Clear AnodizedRecommended Fasteners MountingScrewsT-Nuts“T” Connection (21-044)(4) 24-125-8(4) 24-322-6(4) 20-058In-Line (21-045)(12) 24-125-8—Ordering InformationDescription Unit Weight Part # T-Joining Plate 1 Set 0.42 kg 21-044In-Line Joining Plate 1 Set 1.09 kg 21-045 M6T-NutM8x25BHCSPneumatic PlatePneumatic SealTapped for M8M6x22 SHCS Tapped for M8In-Line Joining PlateIn-Line Seal[21-046]M8x25 BHCSto Join PlatesSeal 80x80M8x25 BHCSto Connect Plateto Profile Assembly note for 21-044: M6 SHCS must be inserted head first into T-slot of 80×80 profile BEFORE attachment of plate to end.T-Joining Plate AssemblyIn-Line Joining Plate Assembly 40 66 80 40 80 ∅6.6 FOR M8 BHCS ∅16 10 Pneumatic Components M8 80 127 100 40 15.9 40 FOR M8 BHCSFROM OPPOSITESIDE 178Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsSpecial ApplicationsCatalog 1816-3/US 179 Blank PlatesApplicationUsed for closing 80×40 and 80×80 profile ends. Technical DataAluminum, Clear AnodizedRecommended Fasteners (Order Separately)Screws: 24-125-8Ordering InformationDescription Unit Weight Part #Blank Plate 80×40 Each 0.1 kg 21-4000z1Blank Plate 80×80 Each 0.2 kg 21-8000z1 21-4000z121-8000z1Pneumatic Fasteners20-01120-012ApplicationTwo styles for connecting 80×40 or larger profiles together when used as compressed air piping. Universal is used on 90O connections. Butt-Fastening is for end to end connections Technical DataZinc Cast, GalvanizedOrdering InformationDescription Unit Weight Part #Pneumatic Universal Fastening Set Each 36 g 20-011Butt-Fastening Set M6 Each 45 g 20-012 Pneumatic Components 20.0 ∅ 20.0 11.0 40.0 40.0 80.0 80.0 15.0 40.0 80.0 40.0 20.0 15.0 178 Industrial Profile SystemsSpecial ApplicationsCatalog 1816-3/US 179Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAPneumatic SealsApplicationReplacement seals for pneumatic connections. Ordering InformationDescription Unit Part #Seal 80×40 Each 21-041Seal 80×80 Each 21-042Seal 80×80 T-Joining Plate Each 21-144Seal 80×80 In-Line Plate Each 21-046Technical DataNeoprene or Buna, BlackNote: Seals should be retightened after 24 hours of initial installation. 40 66 80 40 80 2 ∅8 ∅9.5 ∅16 21-144 40 80 100 127 1.6 ∅8.2 ∅35.5 21-04621-04121-042 40 40 55 1.6 ∅8 ∅22 40 66 80 ∅35.5 ∅9 ∅111.6 Pneumatic Components 180Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsSpecial ApplicationsCatalog 1816-3/US 181 Modular designed workstations by IPS offer a wide range of options and accessory combinations. All structural profiles used in our workstations are made of high strength aluminum, combined with our unique fastening system which provides exceptional flexibility in design for a wide range of applications. All profiles are clear anodized with several available in black. Special colors and coatings are available on request.T-Slots provide easy attachment points for accessories. Closed face profiles are also available for applications requiring aesthetically clean looks or reduction in the potential for dust and contamination.All workstations can be customized for your exact needs. From the heaviest assembly tables to ergonomic LEAN work cells, we have the products and expertise to meet your specifications. Complete Workstations Workstations 180 Industrial Profile SystemsSpecial ApplicationsCatalog 1816-3/US 181Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Description DimensionsMounting Hardware MaterialWeight(kg)Part #W DHParts Bins140280127See fig. 1-3 for mounting choicesHeavy dutypolypropylene,red0.6722-126280280127See fig. 1-3 for mounting choices1.2422-12710513576See fig. 1-3 for mounting choices0.0822-12810518776See fig. 1-3 for mounting choices0.1122-129 Flat Mounting Bracket 606.425.4Not included (See fig. 3)Al, anodized0.0222-128Z2 Angled Mounting Bracket804730Not included (See fig. 1)Al, anodized0.0822-128Z3 Dbl Ang. Mounting Bracket807430Not included (See fig. 2)Al, anodized0.0722-128Z4Parts Bin ApplicationBins for small to large parts and equipment on work benches, work stations, parts racks, etc. Minimizes parts handling.Order all hardware separately 12322-126 thru 22-129 D W H LARGE OR MEDIUM BINWorkstationsOrdering Information 182Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsSpecial ApplicationsCatalog 1816-3/US 183 Technical DataSlide Rail: Al, clear anodizedSlide Collar: Delrin, blackIncludes all hardware as shown.Max. load F = 60 N (13.5 lbs)Mounting Brace includes: profile and two end caps.ApplicationAdjustable bin mounting system for 40 Series work stations and assembly lines. Allows shelf adjustment in two directions: up-down and in-out. 40 series profile can be used as brace for bins at any required horizontal length.Bins and bin mounting hardware must be ordered separately.Ordering InformationDescription Unit Weight Part #Bin Mounting Slide Rail (2 req.) 1 set 0.53 kg 22-130Slide Collar (2 req.) 1 set 81 g 22-134Vertical posts, bins and bin mounting hardware not included. F Workstations22-13022-134Adjustable Bin Mounting Components 56 28 .1 38.1 380 ∅25.4 NYLON WASHER M8 T-NUT 182 Industrial Profile SystemsSpecial ApplicationsCatalog 1816-3/US 183Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USATechnical DataGrey painted steel construction with ball bearing slides and padlock attachment. Stackable.Order all hardware separatelyFor mounting to 40 series profile: Screws24-118-8 T-nuts20-058Flat Washers 24-700-8Ordering InformationDescription (W x D x H) Part # Drawer 400 x 508 x 172mm 22-121Drawer 400 x 508 x 343mm 22-122* Contact factory for additional details Drawer DWH 22-121Tool RunnerOrdering InformationDescription Unit Weight Part #Runner 1 pc 12 g 22-13622-136Technical DataRunner: glass-filled nylon, blackMax. load 100 N (23 lbs) Runner Stop can be created by using: (1) Flat Point Set Screw [24-516-5F] (1) M5 Z-Nut [20-035]ApplicationTo suspend and postion tools at work stations. Runner slides in 40 series profile. Workstations 60 26 8 16 4 .2 ∅10.5 508.0 400.1 32.0 117.0 476.0 H 336.1 32.0 184Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsSpecial ApplicationsCatalog 1816-3/US 185 50-703* Distance between mounting holes** Cylinder mounting distance50-702 2-Cylinder Lift Systemwith Telescopic GuidesOrdering InformationDescription Unit Weight Part #2-Cylinder Lift System 1 set 50-702Telescopic Guide (2 required) 1 pc 4.3 kg 50-703Mounting Plate for 50-703 1 pc 6 g 50-704Application2-Cylinder Lift System together with Telescopic Guides create a compact versatile height adjustment mechanism. The system consists of two fluid-drive cylinders connected by flexible tubing to a manual pump with a unique “fold-away” hand crank. Due to cylinder internal construction, use of telescopic guides is required. Each guide has four mounting holes (two on top, two on bottom) that can be tapped for M8 or 5/16”-18.Technical DataMaximum lift capacity 2224 N (500lbs.)Adjustment range 300mmCylinders are single acting. External force of approx. 67 N (15 lbs.) is required for return stroke.Tubing length: one at 8’ and one at 10’ section.Minimum bending radius for tubing 40mm.Operating temperature 0 – 115°F.Order mounting hardware for pump and telescopic guides separately(see application illustration).1 Pump mount details.2,3 Telescopic guide and cylinder mount details (hardware quantities shown per side). 132 1 24-135-5(3x)Tap M520-081(6x)24-116-8(6x)20-108(2x)2 20-081(2x)50-70424-118-8(4x)Tap M83 Tap M824-160-8(2x)Ø1224-700-8(2x)Lift Systems 184 Industrial Profile SystemsSpecial ApplicationsCatalog 1816-3/US 185Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA4-Cylinder Lift SystemOrdering InformationDescription Unit Weight Part #4-Cylinder Lift System 1 set 11.7 kg 50-700Mounting Plate for 50-700 (2 per cylinder) 1 pc 6 g 50-705Application4-Cylinder Lift System is a compact versatile height adjustment mechanism. It consists of four fluid-drive cylinders connected by flexible tubing to a manual pump with a unique “fold-away” hand crank. The cylinders are completely self-contained, requiring no external support structure.Each cylinder has five pre-tapped mounting holes: four on a flat side (M5x7mm deep) and one at the bottom (M10x12mm deep).Technical DataMaximum lift capacity 3336 N (750lbs.)Adjustment range 300mmCylinders are single acting. External force of approx. 89 N (20 lbs.) is required for return stroke.Tubing length: two at 8’ and two at 10’ section.Minimum bending radius for tubing 40mm.Operating temperature 0 – 115°F.Order all mounting hardware separately (see application sample 1-3). ∅5.8(3x)1338550714 699 16534 ∅25M5x7 DPM10x12 DP3404650 Min300 Max35243535 1 2 3Lift Systems 1 M5 x 60(3x)20-108(2x)Tap M520-081(6x)24-116-8(6x)2 24-212-5 (4x)50-705(2x)Ø9ThruØ15 x 12.3 Dp24-335-8(2x)24-718-8(2x)1 Pump mount details.2,3 Cylinder mount details (hardware quantities shown per cylinder).3 Ø1224-140-10Counterbore Ø15x12mm deep 186Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsSpecial ApplicationsCatalog 1816-3/US 187 Notes 186 Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 187Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Double Flange Slide Blocks 28 and 1″ Series 192-193 40 and 1.5″ Series 196-197 Side Flange Slide Blocks 28 and 1″ Series 194-195 40 and 1.5″ Series 198-199 Slide Pads & Shims 200 Slide Block Accessories Clamp Accessories 201 Ratchet Lever 201 Clamp Machining 202Roller Track 203LR Series Roller Systems 205-221Linear Drive Components 222-230Section 8Linear Applications Index 188Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 189 BlocksStationaryProfile ProfileStationaryBlockThe slide blocks attach to any surface with M8 button head screws. The block slides along a profile when the profile is stationary, or a profile slides in the block, when the block is mounted. Clamping mechanism can be added to lock slide block in place.Profile Slide Blocks are a versatile, cost efficient concept to build a multitude of adjustable slides and movable rail systems with 40mm and 80mm wide profiles. UMHW slide pads engage directly into the T-slots. Shims provide adjustment for a variety of assembly tolerances. Slide blocks are designed for a compression load – do not hang a load from the pad.Slide BlocksApplicationSlide Blocks 188 Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 189Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAUHMW-PE Design InformationUHMW-PE has one of the highest impact strengths of any thermoplastic. It is abrasion resistant, has high tensile strength, displays resistance to stress cracking, and has a low coefficient of friction. It is well-suited where durability and low friction are of paramount importance. Its high resistance to corrosive chemicals, with the exception of oxidizing acids, make it an ideal choice for a wide variety of corrosive environment applications. Maximum operating temperature is 210°F. UHMW-PE can also operate successfully at temperatures as low as -375°F, making it an excellent material for cryogenic applications. Engineering Specifications of UHMW-Polyethylene ASTM TypicalGeneral Properties Temp. Units Test ValuePhysicalSpecific Gravity 73°F gms/cc D792 .830-.934 Water Absorption 24 hours 73°F % D670 Mechanical|Tensile Strength Yield 73°F 103 psi D638 3.1 Break 73°F 103 psi D638 7.0Tensile Elongation Yield 73°F % D638 — Break 73°F % D638 350Izod Impact Strength Notched -40°F ft-lbs/in D256 21.0 Notched 73°F ft-lbs/in D256 30.0 Shore Hardness 73°F D2240 D62-66Thermal Deflection Temp: 68 psi °F D648 203 Coef. of Thermal Exp. in/in/°F D698 1.11×10-5Thermal Conductivity BTU-in/Hr/Ft/°F 2.92 Flammability Rating, UL94 HBElectricalDiel. Strength (short time) V/mil D146 2,300 Dielectric Constant, 50% RH 73°F D160 2.3 Dissipation Fact., 50% RH 73°F 50 Hz D160 1.0 x 10-5 100 Hz 2.5 x 10-5Volume Resis. Dry 73°F ohm/cm D287 >5.0 x 10-5 Bearing Pad PropertiesSlide Blocks 190Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 191 UHMW-PE Deformation under Compression (%) Permanent Deformation PSI Initial Loading After Removal of Load Temp Compression 10 Min. 100 Min. 1000 Min. 1 Day 55 Days After 1 Min. After 24 Hrs. 282 1.5 1.7 1.8 1.9 2.4 0.9 0.8 570 2.4 2.5 2.7 3.0 4.0 1.8 1.2 68° F 850 3.0 4.0 4.5 5.0 5.1 2.7 1.8 1140 4.0 5.0 6.0 7.0 7.5 3.6 2.4 1420 5.0 6.6 7.5 8.0 9.0 4.5 2.8 1700 7.0 7.5 8.0 10.0 11.0 5.4 3.5 282 1.6 1.8 2.0 2.5 2.6 1.3 0.8 570 2.6 3.0 3.5 4.0 5.0 2.7 1.5 122° F 850 4.5 5.0 5.5 6.0 7.5 4.1 2.3 1140 6.0 7.0 8.0 9.0 11.0 5.5 3.1 1420 7.6 9.0 10.0 11.0 14.0 6.9 3.9 1700 9.0 11.0 12.0 13.0 16.0 8.2 4.7 282 2.6 3.0 3.5 4.0 4.5 1.8 1.1 570 5.0 5.5 6.0 6.5 8.0 3.2 2.3 176° F 850 7.5 8.0 9.0 10.0 12.0 4.8 3.5 1140 10.0 11.0 12.5 14.0 15.5 6.4 4.6 1420 12.5 14.0 15.5 17.0 20.0 8.1 5.8 1700 15.0 17.0 18.0 20.5 24.0 9.7 6.9 UHMW-PE polymer has a lower coefficient of friction than glass. Together with its self-lubricating characteristics, it is an ideal material for bearings, bushings, valves, wear strips or any application where sliding contact is encountered.Materials Static KineticAluminum vs. UHMW-PE 0.12 0.016Anodized 204 R1 spec on extruded aluminum.Load Bearing PropertiesCoefficient of Friction -40°-4°32°68°104°176°140°212°Temperature, °FTorsional Rigidity, PSI3500700010,60014,20035,40070,100Torsional Rigidityas a Function ofTemperature(measured on compression molded sheets) Temperature, °FTensile Strength, PSI-4°32°68°104°176°140°212°10002000300040005000Tensile Strength at theYield Pointas a Function ofTemperature(measured at the feed rate of 99mm/min) Slide Blocks 190 Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 191Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAChemical Resistance of UHMW-PEReagent 20°C 50°C 80°CV. HydrocarbonsBenzene / / -Carbon Tetrachloride / – -Cyclohexane + + -Dichloroethylene – – -Diesel oil + + /n-Heptane + + -Petroleum ether + – -Trichloroethylene / – -Toluene / – -White spirit + / -Xylene / / -VI. Alcohols, Ketones, Ester and AminesAcetone + + -Aniline + + /Benzyl alcohol + + +Butyl alcohol + + +Cyclohexanol + + +Ethanol + + -Ethyl acetate + + -Ethylene glycol + + +Glycene + + +Lauryl alcohol + + +Propyl alcohol + + +VII. MiscellaneousBeer + + +Detergents in aqueous solution + + +Distilled water + + +Hydrogen peroxide 30% + + -Linseed oil + + + Milk + + +Olive Oil + + +Sea water + + +Wine + + + Reagent 20°C 50°C 80°CI. Inorganic AcidsChromic acid (80%) + + /Hydrochloric acid (conc) + + +Hydrocyanic acid + + -Hydrofluoric acid – – -Nitric acid (conc) / – -Nitric acid (50%) + + /Nitric acid (20%) + + +Phosphoric acid (85%) + – -Sulphuric acid (conc) + – -Sulphuric acid (50%) + + +II. AlkalisAqueous ammonia + + -Potassium Hydroxide solution + + +Sodium Hydroxide solution + + +III. Aqueous Solutions of Inorganic SaltsAluminum Chloride + + -Aluminum Nitrate + + +Bleaching powder + + +Calcium Chloride + + +Sodium Carbonate + + +Sodium Chloride + + +Sodium Hypochlorite + + +Zinc Chloride + + +IV. Organic AcidsAcetic acid (99%) + + /Acetic acid (10%) + + +Butyric acid + + -Citric acid + + +Formic acid + + -Oleic acid + + / Test specimens Dumb-bell typeDuration of Test 30 days+ Resistant Mechanical properties not appreciably affected/ Limited Resistance Decreases in yield stress and ultimate tensile strength less than 20%- Not Resistant Decreases in yield stress and ultimate tensile strength greater than 20%The information contained herein is, to our best knowledge, true and accurate, but all recommendations or suggestions are made without guarantee, since the conditions of use are beyond our control. We disclaim any liability incurred in connection with the use of these data or suggestions. This publication is not to be taken as a license to operate under, or a recommendation to infringe any patents. The observance of all legal regulations and patents is the responsibility of the user. Slide Blocks 192Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 193 ApplicationThese double flange units offer low cost linear guidance. They utilize glide pads oriented within T-slots. You make your own guidance device. You provide the power – pneumatic, electro-mechanical or manual.Shims are available to provide a more precise fit. See page 201 for optional clamping mechanism and page 202 for machining details.Technical DataAluminum, Clear AnodizedUHMW glide pads Part #ABCDEFG30-280180504xØ8.31128326430-2808801008xØ8.38283264Part #HKLMNP*R30-280139.5816.75289.251.126.930-280839.5816.75289.251.126.9Double Flange 28 x 28 and 1″ x 1″ LMNPRKHDEEEGFBAC * Add 28mm (1.102″) when using 12-248 profile.30-280830-100430-280130-1002 Ordering InformationDescription Unit Weight Part #Slide Block 28, 50mm Long Each 0.14 kg 30-2801Slide Block 28, 100mm Long Each 0.58 kg 30-2808Slide Block 1, 2″ Long Each 0.14 kg 30-1002Slide Block 1, 4″ Long Each 0.25 kg 30-1004Slide Blocks Part #ABCDEFG30-10023.15″2.00″4xØ0.28″0.50″1.00″1.25″2.50″30-10043.15″4.00″8xØ0.28″0.50″1.00″1.25″2.50″Part #HKLMNPR30-10021.56″0.31″0.66″1.03″0.40″0.06″1.11″30-10041.56″0.31″0.66″1.03″0.40″0.06″1.11″ 192 Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 193Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAApplication DataThese double flange units offer low cost linear guidance. They utilize glide pads oriented within T-slots. You make your own guidance device. You provide the power – pneumatic, electro-mechanical, or manual.Shims are available to provide a more precise fit. See page 201 for optional clamping mechanism and page 202 for machining details.Technical DataAluminum, Clear AnodizedUHMW glide padsOrdering InformationDescription Unit Weight Part #Slide Block 28, 50mm Long Each 0.34 kg 30-5601Slide Block 28, 100mm Long Each 0.72 kg 30-5608Slide Block 2, 2″ Long Each 0.23 kg 30-2002Slide Block 2, 4″ Long Each 0.42 kg 30-200430-560830-200430-560130-2002* Add 28mm (1.102″) when using 12-056 profile. HKLMNPRFGBACEEED Double Flange 56 x 28 and 2″ x 1″ Slide Blocks Part #ABCDEFG30-5601108504xØ8.31128469230-56081081008xØ8.38284692Part #HKLMNP*R30-560139.5816.75569.251.12526.7530-560839.5816.75569.251.12526.75 Part #ABCDEFG30-20024.25″2.00″4xØ0.28″0.50″1.00″1.75″3.50″30-20044.25″4.00″8xØ0.28″0.50″1.00″1.75″3.50″Part #HKLMNPR30-20021.56″0.31″0.66″2.03″0.45″0.06″1.11″30-20041.56″0.31″0.66″2.03″0.45″0.06″1.11″ 194Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 195 ApplicationUsed with 28×28 profiles for low cost linear applications where one side is not available for mounting. Delrin slide pads engage directly into the profile T-slots.Shims are available to provide a more precise fit. See page 201 for optional clamping mechanism and page 202 for machining details.Technical DataAluminum, Clear AnodizedUHMW glide padsOrdering InformationDescription Unit Weight Part #Slide Block 28, 50mm Long Each 0.34 kg 30-2821Slide Block 28, 100mm Long Each 0.39 kg 30-2828Slide Block 1″, 2″ Long Each 0.14 kg 30-1012Slide Block 1″, 4″ Long Each 0.25 kg 30-101430-282130-1012Side Flange28 x 28 and 1″ x 1″Note: All dimensions in mm (in)* Add 28mm (1.102″) when using 12-428 profile. ABEEEDFGPMNLHRKC 30-282830-1014 Slide Blocks Part #ABCDEFG30-282154502xØ8.31128101830-2828541004xØ8.38281018Part #HKLMNP*R30-282149.58412811.91.226.330-282849.58412811.91.226.3 Part #ABCDEFG30-10122.13″2.00″2xØ0.28″0.50″1.00″0.375″0.71″30-10142.13″4.00″4xØ0.28″0.50″1.00″0.375″0.71″Part #HKLMNPR30-10121.95″0.31″1.68″1.03″0.52″0.06″1.03″30-10141.96″0.31″1.68″1.03″0.52″0.06″1.03″ 194 Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 195Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Side Flange Extended28 x 28 and 1″ x 1″ApplicationUsed with 28×28 profiles for low cost linear applications where one side is not available for mounting. Delrin slide pads engage directly into the profile T-slots.Shims are available to provide a more precise fit. See page 201 for optional clamping mechanism and page 202 for machining details.Technical DataAluminum, Clear AnodizedUHMW glide padsOrdering InformationDescription Unit Weight Part #Slide Block 28, 90mm Long Each 0.34 kg 30-2822Slide Block 28, 140mm Long Each 0.72 kg 30-2829Slide Block 1″ Extended, 4″ Long Each 0.26 kg 30-102430-282230-1024* Add 28mm (1.102″) when using 12-428 profile. HRKNMPEFDBGLAC 30-2829Slide Blocks Part #ABCDEFG30-282254904xØ8.3102813.22030-2829541404xØ8.3102813.220Part #HKLMNP*R30-282249.5818281211.926.330-282949.5818281211.926.3 Part #ABCDEFG30-10242.13″4.00″4xØ0.28″0.50″1.00″0.56″1.00″Part #HKLMNPR30-10241.95″0.31″0.71″1.03″0.52″0.06″1.03″ 196Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 197 ApplicationBearing block for slides and movable rail applications requiring very cost efficient construction. This block can be used on 40 series Standard or Heavy profiles. High cycle (HC) units utilize a steel threaded insert to mount the pad to the unit. These specially designed slide block units are used in high cycle applications where rapid acceleration and deceleration takes place. Shims are available to provide a more precise fit. See page 201 for optional clamping mechanism and page 202 for machining details.30-400830-150630-400130-1503* Add: 40mm (1.575″) when using 10-080, 10-680 or 11-080 profile. 80mm (3.15″) when using 10-120 profile. 120mm (4.72″) when using 10-164 or 11-140 profile. BAFGCEEEDHKLMNPR Double Flange 40 x 40 and 1.5″ x 1.5″ Slide Blocks30-4001HC30-1503HC30-4008HC30-1506HC Ordering InformationDescription Unit Weight Part #Slide Block 40, 80mm Long 1 pc 0.31 kg 30-4001Slide Block 40, 160mm Long 1 pc 0.62 kg 30-4008Slide Block 40 HC, 80mm Long 1 pc 0.31 kg 30-4001HCSlide Block 40 HC, 160mm Long 1 pc 0.62 kg 30-4008HCSlide Block 1.5, 3″ Long 1 pc 0.31 kg 30-1503Slide Block 1.5, 6″ Long 1 pc 0.62 kg 30-1506Slide Block 1.5 HC, 3″ Long 1 pc 0.31 kg 30-1503HCSlide Block 1.5 HC, 6″ Long 1 pc 0.62 kg 30-1506HCTechnical DataAluminum, Clear AnodizedUHMW glide padsSafe load: 30-4001 or 30-1503 = 1,000 N (225 lbs) 30-4008 or 30-1506 = 2,000 N (450 lbs) Part #ABCDEFG30-400196804xØ8.32040408030-4008961608xØ8.320404080Part #HKLMNP*R30-400150816401243430-4008508164012434 Part #ABCDEFG30-15033.78″3.00″4xØ0.28″0.75″1.50″1.50″3.00″30-15063.78″6.00″8xØ0.28″0.75″1.50″1.50″3.00″Part #HKLMNPR30-15031.97″0.31″0.63″1.52″0.50″0.12″1.34″30-15061.97″0.31″0.63″1.52″0.50″0.12″1.34″ 196 Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 197Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAApplicationBearing block for slides and movable rail applications requiring very cost efficient construction. This block can be used on the 80mm side of 40 series Standard or Heavy profiles. High cycle (HC) units utilize a steel threaded insert to mount the pad to the unit. These specially designed slide block units are used in high cycle applications where rapid acceleration and deceleration takes place. Shims are available to provide a more precise fit. See page 201 for optional clamping mechanism and page 202 for machining details.30-800830-300630-800130-3003* Add: 40mm (1.575″) when using 10-088 or 11-088 profile. 120mm (4.72″) when using 10-160 or 11-160 profile. MNPRLKHGFEEEDCAB Double Flange 80 x 40 and 3″ x 1.5″ Slide Blocks30-8001HC30-3003HC30-8008HC30-3006HC Part #ABCDEFG30-8001136804xØ8.320406012030-80081361608xØ8.3204060120Part #HKLMNP*R30-80015081680123.73430-80085081680123.734 Part #ABCDEFG30-30035.35″3.00″4xØ0.34″0.75″1.50″2.35″4.69″30-30065.35″6.00″8xØ0.34″0.75″1.50″2.35″4.69″Part #HKLMNPR30-30031.97″0.31″0.63″3.02″0.54″0.12″1.34″30-30061.93″0.31″0.63″3.02″0.54″0.12″1.34″Ordering InformationDescription Unit Weight Part #Slide Block 80, 80mm Long 1 pc 0.38 kg 30-8001Slide Block 80, 160mm Long 1 pc 0.76 kg 30-8008Slide Block 80 HC, 80mm Long 1 pc 0.38 kg 30-8001HCSlide Blolck 80 HC, 160mm Long 1 pc 0.76 kg 30-8008HCSlide Block 3, 3″ Long 1 pc 0.38 kg 30-3003Slide Block 3, 6″ Long 1 pc 0.76 kg 30-3006Slide Block 3 HC, 3″ Long 1 pc 0.38 kg 30-3003HCSlide Block 3 HC, 6″ Long 1 pc 0.76 kg 30-3006HCTechnical DataAluminum, Clear AnodizedUHMW glide padsSafe load: 30-8001 or 30-3003 = 2,000 N (450 lb) 30-8008 or 30-3006 = 4,000 N (900 lb) 198Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 199 Side Flange40 x 40 and 1.5″ x 1.5″ApplicationUsed with 40×40 or 1.5″x1.5″ profiles for low cost linear applications where one side is not available for mounting. Slide pads engage directly into the profile T-slots. Shims are available to provide a more precise fit. High cycle (HC) units utilize a steel threaded insert to mount the pad to the unit. These specially designed slide block units are used in high cycle applications where rapid acceleration and deceleration takes place. Optional clamping mechanism can be added as required. Each clamp requires a machined hole. Refer to pages 201-202 for detailsTechnical DataAluminum, Clear AnodizedUHMW glide padsOrdering InformationDescription Unit Weight Part #Slide Block 40, 80mm Long Each 0.31 kg 30-4021Slide Block 40, 160mm Long Each 0.42 kg 30-4028Slide Block 40 HC, 80mm Long Each 0.31 kg 30-4021HCSlide Block 40 HC, 160mm Long Each 0.42 kg 30-4028HCSlide Block 1.5, 3″ Long Each 0.31 kg 30-1513Slide Block 1.5, 6″ Long Each 0.62 kg 30-1523Slide Block 1.5 HC, 3″ Long Each 0.31 kg 30-1513 HCSlide Block 1.5 HC, 6″ Long Each 0.62 kg 30-1523 HC30-402830.152330-402130-1513 ABEEEDFGPMNLHRKC * Add: 40mm (1.575″) when using 10-080, 10-680 or 11-080 profile. 80mm (3.15″) when using 10-120 profile. 120mm (4.72″) when using 10-164 or 11-140 profile. Slide Blocks30-4028HC13-1523HC30-4021HC30-1513HC Part #ABCDEFG30-402166802xØ8.32040101830-4028661604xØ8.320401018Part #HKLMNP*R30-402166850401443430-4028668504014434 Part #ABCDEFG30-15132.60″3.00″2xØ0.34″0.75″1.50″0.38″0.71″30-15232.60″6.00″4xØ0.34″0.75″1.50″0.38″0.71″Part #HKLMNPR30-15132.60″0.31″1.97″1.61″0.58″0.12″1.34″30-15232.60″0.31″1.97″1.61″0.58″0.12″1.34″ 198 Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 199Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA ApplicationUsed with 40×40 or 1.5″x1.5″ profiles for low cost linear applications where one side is not available for mounting. Slide pads engage directly into the profile T-slots. Shims are available to provide a more precise fit.High cycle (HC) units utilize a steel threaded insert to mount the pad to the unit. These specially designed slide block units are used in high cycle applications where rapid acceleration and deceleration takes place. Optional clamping mechanism can be added as required. Each clamp requires a machined hole. Refer to pages 201-202 for details.Technical DataAluminum, Clear Anodized UHMW glide padsOrdering InformationDescription Unit Weight Part #Slide Block 40, 120mm Long Each 0.34 kg 30-4022Slide Block 40, 200mm Long Each 0.72 kg 30-4029Slide Block 40 HC, 120mm Long Each 0.34 kg 30-4022HCSlide Block 40 HC, 200mm Long Each 0.72 kg 30-4029HCSlide Block 1.5, 4.5″ Long Each 0.37 kg 30-1516Slide Block 1.5 HC , 4.5″ Long Each 0.37 kg 30-1516HC30-402230-1516Side Flange Extended40 x 40 and 1.5″ x 1.5″* Add: 40mm (1.575″) when using 10-080, 10-680 or 11-080 profile. 80mm (3.15″) when using 10-120 profile. 120mm (4.72″) when using 10-164 or 11-140 profile. CLABEFDPMNKHRG 30-4029Slide Blocks30-4022HC30-1516HC Part #ABCDEFG30-4022661204xØ8.31040102030-4029662004xØ8.310401020Part #HKLMNP*R30-402266818401443430-4029668184014434 Part #ABCDEFG30-15162.60″4.50″4xØ0.34″0.50″1.50″0.47″0.75″Part #HKLMNP*R30-15162.60″0.31″1.97″1.50″0.58″0.12″1.34″ 30-4029HC 200Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 201 Slide BlocksSlide Pads & ShimsRecommended Fastener: 24-112-5ApplicationGlide pads let you custom design a low friction guidance unit. Slide pad can also be attached to a profile to serve as a guide in sliding door applications. Ordering InformationDescription Unit Part #Slide Pad 28 Series, 80mm* 1 pc 30-2800-2Slide Pad 40 Series, 80mm* 1 pc 30-4000-2 Slide Pad 40 Series, 300mm† 1 pc 30-4000-3Slide Pad 40 Series, 80mm High Cycle 1 pc 30-4000-6Shim 80 pkg of 4 30-412Z2 Shim 160 pkg of 4 30-812Z2Slide Pad, 1″ x 2″ * 1 pc 30-1000 Slide Pad, 1″ x 2″ Top* 1 pc 30-1001 Slide Pad, 1″ x 2″ Top* 1 pc 30-2000Slide Pad, 1.5″ x 3″ * 1 pc 30-1500 Slide Pad, 1.5″ x 3″ High Cycle 1 pc 30-1501Slide Pad, 3″ * 1 pc 30-3000 Slide Pad, 3″ High Cycle 1 pc 30-3001* Tapped † Un-tappedTechnical DataSlide Pad: UHMWShim: PET (polyethylene terephthalate), 0.005″ thick #10-32×1/2″BHCS[25-108-2] #10-32InsertforUHMW[25-705-2] SlidePadHighCycle40 AppropriateSlideProfile Cut-awayviewoftheassembly andpartsforahighcycleslide.Partsshowareincludedwhenyouorderaslideblockassembly,butcanbeorderedseparatelytomakeyourowncustomhighcyclesideblockassembly. 200 Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 201Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Width Depth Part #Description (mm) (mm) 40/1.5″ Series 28 SeriesRatcheting L-Handle 63 32.8 30-0011 30-0001Star Handle 40 36.7 30-0015 30-0005ApplicationThese clamp accessories provide positioning and adjustment for 40 Series slide units. Handles provide mechanism to lock the slide block in place anywhere on the extrusion.Slide extrusions and pads can be drilled to accept clamp.Ordering Information Addanoptionallockinghandletoanyslideblock,toprovideamechanismtolocktheslideblockinplaceanywhereontheextrusion. Slide BlocksClamp Accessories30-001130-001530-000530-0001 Ratchet LeverApplicationFor use on applications where a locking handle is desired, particularly on profile slide blocks. A 9mm hole is required to mount the ratchet lever. Technical DataFiber reinforced techno-polymer plastic with metal insert. Hardware varies with application.Ordering InformationDescription Unit Weight Part #Ratchet Lever M8 x 16 Each 87 g 23-316Ratchet Lever M8 x 20 Each 43 g 23-320Ratchet Lever M8 x 25 Each 45 g 23-325Ratchet Lever M8 x 40 Each 50 g 23-340Ratchet Lever M8 x 50 Each 53 g 23-350Ratchet Lever M8 x 63 Each 57 g 23-363 Handle[23-325]M8 Economy T-Nut[20-081]M8 Flat Washer[24-700-8] 23-325 202Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 203 Clamp MachiningSlide blocks may be pre-drilled for mounting of the clamp. If drilling is desired, specify the machining service number and give the location of the hole(s) to be drilled according to the drawings below.Ordering InformationOrdering Examples:Slide block drilled for one clamp (note the description added to the slide block part number): 30-2822 w/19-140 @ LUMultiple clamps may be mounted on a slide block. Each clamp requires a hole to be drilled. Note the description and the number of holes is added to the slide block part number.Guide drilled for two clamps: 30-4008 w/19-140 @ LG and LLGuide drilled for three clamps: 30-8008 w/19-140 @ LP, LT and LMSlide Blocks ProfilesHole SizeMachining Service No.28, 56, 40, 80, 1.5″Ø0.323″19-140 LVLYLULZLW30-282230-402230-282930-4029LX LGLJLKLHLILL30-280130-400130-280830-4008 LQLMLRLNLSLOLPLT30-560130-800130-560830-8008 LCLF30-282130-402130-282830-4028LBLELALD 202 Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 203Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USASlide Block ProfilesRoller Track 14-100ApplicationEconomical track for flow rack system. Usually use two tracks per runway but three of four may be used with heavy or wide loads. Can be attached to 40, 30 or 28 Series profiles.Technical DataChannel: rolled steel, galvanized (0.028”)Roller: PE, whiteLoad: 22 N (5 lbs) per rollerOrdering InformationDescription Unit Part #Roller Track per meter, max. 3M 14-100Saw cut necessary for cut to length 19-007 204Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 205 Notes 204 Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 205Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USALR Series and Parker IPS provide solutions to a wide variety of industries and applications including:• Automotive• Industrial Manufacturing• Life-Sciences• Packaging• Material Handling• Machine Building• Aerospace• Textiles• Pulp & Paper• Semi-conductor LR Series provides seamless integration with engineered structures from Parker IPS providing a more complete system solution. Integrating LR Series products with Parker IPS structural systems provides clear advantages over welded steel construction.• Welding distortion is eliminated producing a highly accurate finished product• Anodized aluminum is corrosion resistent and does not require painting or maintenance.• Shorter delivery lead times than other fabrication techniques• Modifications and changes can be made through all stages of the project• Integrating motion, control and structure streamlines engineering and supply chain channels.• Fast, accurate 3D system drawings Linear Roller SystemsLR Series System Solutions 206Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 207 Performance Overview LR 6 LR 14 LR 14HD LR 25 Maximum Carriage Load N (lbs) 649 (146) 2,669 (600) 3,350 (753) 11,552 (2,597) Pully Diameter (mm): Reversing Unit 40 47.75 47.75 47.75 47.75 Pully Diameter (mm): Reversing Unit 80 89.12 89.12 89.12 89.12 Pully Lead (mm/rev): Reversing Unit 40 150 150 150 150 Pully Lead (mm/rev): Reversing Unit 80 280 280 280 280 Maximum Travel Without Splice (mm)* 5900 5850 5840 5680 Minimum Travel (mm) 300 250 240 80 Maximum Drive Torque (Nm): Reversing Unit 40 20 20 20 20 Maximum Drive Torque (Nm): Reversing Unit 80 37 37 37 37 Maximum Belt Traction (lbs/belt) 575 575 575 575 Maximum Number of Belts 1 2 2 4 Maximum Speed (m/s) 5 5 5 5 Maximum Acceleration at No Load (m/s2) 10 10 10 10 Repeatability (mm) ± .10 ± .10 ± .10 ± .10 Linear Roller Series products from Parker IPS provide a high level of accuracy, load-bearing strength, and flexibility in a modular, low-cost package. These products utilize standard components and can adapt to a wide range of applications.The foundation of the LR product line is the 40 Series of structural profiles that offer numerous mounting configurations. Profiles allowing maximum unsupported spans can be selected, saving valuable space and reducing over-all system costs. Standard lengths of 6m and the ability to splice multiple sections allow config-uration of nearly infinite stroke.LR Roller Bearings are made of 100 Cr6, ground and hardened steel, and provide low friction, long life, high speed, and heavy load capabilities. Bearing units are available as single and double roller types. Custom carriage configurations using multiple bearing units can be set up to meet off-the-shelf lead times.• Carriage loads to 2597 lbs• Custom carriage options• Speeds up to 5m/sec• Easy mounting to AC motors• Stroke lengths over 6m• Instant motor/gearbox approvalThe modular design allows for easy assembly, fast engineering, and a flexible platform capable of meeting even the most demanding application.* Consult factory for long travel lengths.Market Applications• Material Handling• Gantry Systems• Visual Inspection• Assembly and Transfer LinesThe LR Series Belt Drive Roller System from Parker IPS Linear Roller Systems 206 Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 207Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAOrder Example Adapter Flange Mount TypeBolt CircleBolt SizePilot Dia.Pilot DepthA98.40M573.023.5B66.70M438.102.0C75.00M560.003.0D98.40M673.023.5E100.00M680.004.0F70.00M450.003.5G90.00M570.003.5Note: All flange data in mm LR B 5 2 S0150 B 2000 R1 S1 F1 – A22A34 TallSideNarrow Side Profile Orientation ✔ Accessories (Replace # with Quantity Required)A1# BumpersA2# Proximity SwitchA3# Exciter CamA5# Hand Crank Assembly**A6# Carriage Locking Mechanism**A7 Reversing Unit 80A8 Extra Bearing Set ✔ Adapter Flange† (See Dim. Table) F1 Blank, No Servicing F2 Universal Adapter Special Servicing* F3 Mounting Type A F4 Mounting Type B F5 Mounting Type C F6 Mounting Type D F7 Mounting Type E F8 Mounting Type F F9 Mounting Type G*** Contact customer service for technical assistance ** Manual systems only† See page 204 for instant motor/gearbox approval selectionLinear Roller Systems*** All profiles do not fit with all system sizes. Contact factory for application assistance.✔ System Size LR 6 ……………………………………………….. A LR 14 ……………………………………………… B LR 14HD …………………………………………. C LR 25 ……………………………………………… D✔ Extrusion Selection*** 40×80 Standard ……………………………….. 3 40×80 Heavy……………………………………. 4 80×80 Standard ……………………………….. 5 80×80 Heavy …………………………………… 6 80×80 Super Heavy ………………………….. 7 80×160 Standard ……………………………… 8 160×80 Heavy………………………………….. 9 120×80 Heavy………………………………….. 0✔ Profile Orientation Tall Side (see example figures) ………….. 1 Narrow Side (see example figures) …….. 2✔ Bearing Configuration Double Bearing (xxxx is standard carriage length) ………. Dxxxx Single Bearing (see page 200 for min.) (enter total carriage length in mm) ……… Sxxxx✔ Type Belt Drive ………………………………………… B Manual ……………………………………………. M✔ Travel Travel Length (mm) …………………………… xxxx✔ Reversing Unit Combinations None (Manual Option Only) ……………….. R1 Spline/Idler ……………………………………… R2 Spline/Spline …………………………………… R3 Spline/8mm Bore ……………………………… R4 Idler/Idler ………………………………………… R5 Idler/8mm Bore ………………………………… R6 8mm Bore/8mm Bore ……………………….. R7✔ Adapter Shafts (couplers)† Blank – No Servicing ………………………… S1 Special Servicing* ……………………………. S2 Shaft Type A, 0.375 in (9.525 mm) ……… S3 Shaft Type B, 0.433 in (11mm) …………… S4 Shaft Type C, 0.5 in (12.7mm) ……………. S5 Shaft Type D, 0.551 in (14mm) …………… S6 Shaft Type E, 0.625 in (15.875mm) …….. S7 Shaft Type F, 0.63” (16mm) ………………… S8 208Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 209 Operating Condition Load Factor Steady Load 1 Fluctuating Load – Low 1.4 Average 1.7 High 2Load Capacity = Load * Load Factor Loading CapacityLR6 SeriesLR14/14HD SeriesLR25 SeriesKey for charts on pages 4 and 5 MzFzMy FyFz Mx LOAD (N)LOADING (Fz) vs.LIFE4003002001000020000400006000080000LIFE (Hours)100000 600LOAD (N)LOADING (Fy) vs.LIFE5004002003001000LIFE (Hours)020000400006000080000100000 3000LOAD (N)LOADING (Fy) vs.LIFE25002000100015005000LIFE (Hours)0200004000060000800001000003500 LOAD (N)LOADING (Fz) vs.LIFE2000150010005000020000400006000080000LIFE (Hours)100000 12000LOAD (N)LOADING (Fy) vs.LIFE1000080004000600020000LIFE (Hours)020000400006000080000100000 LOAD (N)LOADING (Fz) vs.LIFE6000500040003000200010000020000400006000080000LIFE (Hours)100000 Static Moment LoadsDetermine which moment loads are induced by the static load. Locate the center of gravity of the load and the length of the moment arm.Moment Arm LengthsDetermine the moment arm lengths associated with each moment load by measuring the distance from the center of the load to the center of the carriage in each moment load direction.Pitch MomentWhen determining the pitch moment arm, it is necessary to consider the distance from the top of the load attachment plate to the center of the carriage bearings. 1 m/sec 2 m/sec 3 m/sec 4 m/sec 5 m/sec Linear Roller Systems 208 Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 209Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USALoading CapacityLR6 SeriesLR14 SeriesLR14HD SeriesLR25 Series 30MOMENT (Nm)ROLL MOMENT (Mx) vs.LIFE2520151050LIFE (Hours)020000400006000080000100000 175MOMENT (Nm)PITCH MOMENT (My) vs.LIFE1501251007550250LIFE (Hours)020000400006000080000100000 MOMENT (Nm)YAW MOMENT (Mz) vs.LIFE300250200150100500LIFE (Hours)350020000400006000080000100000 1600MOMENT (Nm)PITCH MOMENT (My) vs.LIFE1400120010008006004002000LIFE (Hours)020000400006000080000100000 MOMENT (Nm)YAW MOMENT (Mz) vs.LIFE6005004003002001000LIFE (Hours)700800020000400006000080000100000 2000MOMENT (Nm)PITCH MOMENT (My) vs.LIFE150010005000LIFE (Hours)225002000040000600008000010000017501250750250 MOMENT (Nm)YAW MOMENT (Mz) vs.LIFE8006004002000LIFE (Hours)10001200020000400006000080000100000 200MOMENT (Nm)ROLL MOMENT (Mx) vs.LIFE150100500LIFE (Hours)0200004000060000800001000001751257525 550MOMENT (Nm)ROLL MOMENT (Mx) vs.LIFE5004003002001000LIFE (Hours)020000400006000080000100000 MOMENT (Nm)PITCH MOMENT (My) vs.LIFE6000500040003000200010000LIFE (Hours)020000400006000080000100000 MOMENT (Nm)YAW MOMENT (Mz) vs.LIFE3000200010000LIFE (Hours)020000400006000080000100000 150MOMENT (Nm)ROLL MOMENT (Mx) vs.LIFE1251007550250LIFE (Hours)020000400006000080000100000 Linear Roller Systems 210Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 211 Carriage InformationCarriage Mounting DetailLR Series actuators offer unmatched carriage flexibility. Available in fixed length double bearing units or adjustable length single bearing units, the carriage can be tailored to meet specific load requirements. LR6 SeriesLR14 SeriesLR25 Series LR14HD Series Single Bearing CarriageDouble Bearing Carriage A B C D A D B C A B C D A D B C A D B C Consult Factory * Based on 40 mm Profile Width for LR6, LR14, and LR14HD Width Length Thickness T-Slot Weight Series Carriage A B C D (kg) LR6* Single 80 300 min. 16 39 Variable Double 80 242 16 39 0.8 LR14* Single 160 140 min. 28 40 Variable Double 160 141.6 28 40 3.24 LR14HD* Single 159.5 160 min. 28 40 Variable LR25 Single Consult Factory Linear Roller SystemsConsult FactoryConsult Factory 210 Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 211Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Additional configurations are available to meet the widest variety of applications. Contact the factory to find the perfect fit for any design.Carriage OrientationA variety of carriage orientations are available due to the LR Series’ modular design. Options include multiple linked and multiple independent carriages on a single actuator and custom carriage lengths.Selecting the proper profile for load support, and configuring the carriage to suit the specific load and application provides the benefits of a custom product without the additional costs and lead times.Inertia ValuesData calculated using a Reversing Unit 40 & Double Bearing Carriage Linear Inertia (oz-in2) vs Stroke (mm) Series 100 200 300 500 750 1000 1500 3000 4000 6000 6 25.87 26.12 26.38 26.89 27.53 28.17 29.45 33.29 35.85 40.96 14 63.95 64.20 64.46 64.97 65.61 66.25 67.53 71.37 73.93 79.04 14HD 73.09 73.35 73.60 74.12 74.76 75.40 76.68 80.51 83.07 88.19 25 293.45 293.71 293.96 294.48 295.12 295.76 297.04 300.87 303.43 308.55 Linear Inertia (kg-cm2) vs Stroke (mm) Series 100 200 300 500 750 1000 1500 3000 4000 6000 6 4.73 4.78 4.82 4.92 5.04 5.15 5.39 6.09 6.56 7.49 14 11.70 11.74 11.79 11.88 12.00 12.12 12.35 13.05 13.52 14.46 14HD 13.37 13.42 13.46 13.56 13.67 13.79 14.02 14.73 15.19 16.13 25 53.67 53.72 53.77 53.86 53.98 54.09 54.33 55.03 55.50 56.43Carriage Information Linear Roller Systems 212Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 213 Deflection at Various Loads X Axis Y Axis F z UnsupportedLength DEFLECTION (mm) LR14/14HD with 11-080 PROFILE 1.51.20.60.30UNSUPPORTED LENGTH (m)0.900.20.40.60.81.01.21.41.61.82.0 75 lbs150lbs225 lbs300lbs450lbs600lbs675 lbs DEFLECTION (mm)LR25 with 11-089 PROFILE1.51.20.60.30UNSUPPORTED LENGTH (m)0.900.20.40.60.81.01.21.41.61.82.0 300lbs600lbs900 lbs1200lbs1800 lbs2400 lbs2700lbs DEFLECTION (mm)LR6 with 11-040 PROFILE1.51.20.60.30UNSUPPORTED LENGTH (m)0.9 15lbs30 lbs45lbs60lbs75lbs90lbs112lbs00.20.40.60.81.01.21.41.61.82.0 Deflection CalculationParker IPS structural profiles are the foundation of the LR Series, providing unmatched flexibility and allowing for seamless integration of motion and structure. After selecting the LR Series type for appropriate carriage load capacity, the following formula will identify the profile configuration that is best suited for the application.Deflection formula for length supported at both ends:ƒ = F * L3 48 E * I * 104Where:ƒ = deflection in mmF = load in NL = free profile length in mmE = Modulus of Elasticity in N/mm2 EAL = 70,000 N/mm2I = Moment of inertia in cm4Additional configurations are available for specific applications. Choosing Profiles Series CompatibilityMoment of InertiaSection ModulusProfile Type614/14hd25IX[cm4]IY[cm4] WX[cm3]WY[cm3]40×40 StandardX9.469.464.734.7340×40 HeavyX14.1814.187.097.0940×80 StandardXX71.7917.2317.998.6240×80 HeavyXX10226.7325.513.3780×80 HeavyXX185.2185.246.346.380×80 Extra HeavyXX215.85215.8553.9653.9680×160 Standard XX922.5271.1115.367.880×160 HeavyXX1106.92343.37138.3785.84Linear Roller Systems 212 Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 213Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA 100.0 ∅30.0 D ∅6.000 x 15.000 DPRelief Hole 16.000 [0.630] M6x1 – 6H C B A Spline Tooth andKeyway in line Motor/Gearbox MountingLR Series offers effortless motor and gearbox mounting and can accommodate a wide range of Servo and AC motors up to NEMA 56C as well as gearboxes. Connections are made using an Adapter Flange and Shaft. Motor/Gearbox MountingThese coupling components are available in preconfigured styles or as machinable blanks to accommodate connections not listed in the Motor/Gearbox Quick Selector on the following pages.Adapter ShaftUniversal Adapter FlangeApplicationAdapter element between Reversing Unit 40 and various drive motors. Surface hardening permits machining for appropriate adapting configuration. For rigid connection of Reversing Units 40 in parallel, when distance between them exceeds 1m (3 ft).ApplicationTransition element for connecting drive motors to the Reversing Unit 40. Can be serviced to customer needs. Design accommodates hole pattern of NEMA motors up to size 56. Linear Roller Systems Flange Part # CodeBolt Circle “A”Bolt Size “B”Pilot Diameter “C”Pilot Depth “D”P/NA98.40M573.023.531-014ADB66.70M438.102.031-014BC75.00M560.003.031-014CD98.40M673.023.531-014ADE100.00M680.004.031-014EF70.00M450.003.531-014FG90.00M570.003.531-014GBlank––––31-014 Adapter Shaft TypeShaft Diameter (in/mm) “A”Key Width (mm) “B”Shaft Height Over Key (mm) “C”Shaft Diameter Depth (mm) “D”P/NA0.375″ (9.525)2.3910.6050.8031-001B0.433″ (11)412.5050.8031-002C0.500″ (12.7)3.1814.2250.8031-003D0.551″ (14)516.0050.8031-004E0.625″ (5.875)4.7618.0050.8031-005F0.630″ (16)518.0050.8031-006Blank––––31-010 214Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 215 Adapter Flange Manufacturer Motor/Gearbox Model # Code CodeAllen-Bradley 1326Ax-B3, H-3xxx D E MPL-A45x, MPL-B45x C D MPL-x 310,320,330 E E N-34xx C A Y-2xxx D FAMP HT34-486 C AAnimatics SM34xx A ABaldor All NEMA 48 C – All NEMA 56 E –Bayside PX34, RX34, NE34, NR34 C AElectroCraft N-34xx C A H-3xxx D EEmerson DXE208 A B DXM-316, 340 D E MGE 205, 208, 208CONS A B MGE-316, DXE-316 C A MGM-340 D E NTE-212-x, NTE-207-x A B NTE-3xx C AGE Fanuc STM13xx C AGiddings & Lewis HSM 307, 320 D E NSM34xx C A YSM2xx D FIDC BN 31, 32 A A P33x E AKollmorgen MT(x)302 (NEMA 34) A A MT(x)304 (NEMA 34) A A MT(x)308 (NEMA 34) C A MTx 306, 308 (NEMA 100) D E MTx306 (NEMA-34) C AMCG AB34x C A ID34004 C AMitsubishi HC-KFS23(B), MF(S)23(B) D F HC-KFS43(B), MF(S)43(B) D F HC-PQ23, HC-PQ43 D FMotion Solutions SLM075 E AMRV MRV 31, 32, 33 C AOmron R88M-U40030x D F R88M-W20030, R88M-W40030 D F R88M-WP4xxx D G Adapter Flange Manufacturer Motor/Gearbox Model # Code CodePacific Scientific H3xNR A A N31HR, N32HR C A N33HR, N33HR C A R30 (English & Metric) C A R30P (Metric) C AParker APEX 603 ,605 ,606 ,610 D E BE23x A B SM/SE 231, 232, 233 – L A B BE34x C A ES3xB A A J034x, N034x C A J092x, N092x, HDY92, HDX92 D E MPM89x***6*** C A MPM89x***7*** D E MPP092x E E OEM-83-xxx, QM83 A A PTN060 D H RS 31, 32, 33 A A S, SX, SXF 83 A A SMN082 D E TS 31, 32 C A TS33 E A VS31, VS32 C D ZETA83 A AQuickSilver QCI-34H-1, -2 C A QCI-34H-3, -4 E A QCI-34N-x C ASlo-Syn KML-09x, KMT-09x C ASuperior Electric KML-09x, KMT-09x C AWarner Electric HIS35xx C A KML-09x, KMT-09x C AYaskawa SGM-02, -03, -04 D F SGMAH-02**F** D F SGMAH-04A**F** D F SGML-04A D F SGMP-02, -03, -04 D G SGMPH-02, SGMP-02 D G SGMPH-04A(B) D GThe adapter flange will accommodate motors through NEMA size 56. Additional mounting configurations are available. Contact Customer Service if your Motor or Gearbox is not listed. Motor/Gearbox Quick SelectorLinear Roller Systems 214 Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 215Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USANotes 216Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 217 Roller SystemsRoller System 6 # Description Part # Qty 1 40×40 Heavy Profile @ 1000mm 11-040 1 2 Shaft Clamp 6 @ 998mm 13-106 2 3 Linear Shaft 6 @ 998mm 13-505 2 4 80×16 Profile @ 300mm 10-081 1 5 End Cap 80×16 18-812 2 6 Single Bearing Unit 6 Centric 30-401 2 7 Single Bearing Unit 6 Eccentric 30-403 2 8 End Cap/Lubricating System 6 30-407 4 9 Reversing Unit 40 Spline 31-122 110 Reversing Unit 40 w/8mm Bore 31-124 111 Universal Adapter Flange 31-014 112 Adapter Shaft, Blank 31-010 113 Timing Belt 25T10 @ 2300mm 31-052-1 114 Clamping Block for Belt 25T10 31-030 215 Fastening Set for Bearing Units 6 20-007 416 M6x20 Socket Head Cap Screw 24-320-6 117 M6 Lock Nut 24-716-6 218 M6x120 Socket Head Cap Screw 24-3120-6 219 Limit Stop, Bi-Directional 31-038 120 M6x45 Socket Head Cap Screw 24-345-6 321 Proximity Switch 31-035 222 Mounting Plate for Proximity Switch 31-036 123 Exciter Cam 31-033 2NoteConfiguration shown: 80×16 plate with smooth top surface; bottom surface is tapped M8 for the limit stop and M6 for clamping block mount.Alternative option: 80×16 plate with T-slots on top counterbored for M8 screws for attaching bearing units and clamping block; bottom of the plate is tapped M8 for the limit stop. Maximum stroke for configuration shown: 675 mm 216 Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 217Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USARoller Systems ApplicationComponents for constructing Roller System 6 for light duty applicationsTechnical DataLinear Shaft: Cf53 high grade carbon steel (AISI 1050)Precision ground to ISO h6 tolerance µm Roundness: 4 µm Parallelism: 5 µm/1000mm Surface quality: Ra 0.3µm (Rz 1.6µm) Hardness depth: minimum 0.4 mm Surface hardness: 670 to 840 HV (RC 59 to 65)Shaft clamp: Al, anodizedBearing Units: Aluminum anodized housing, Roller 6 (30-008), Bolt 6 Centric (30-006) or Eccentric (30-007), and M6x8 cone point set screwPreload range for eccentric bearing units ± 0.45 mmEnd Cap/ Lubricating System (set of left and right): glass-filled nylon, black; includes felt, spring and M4x10 SHCSFastening Set (one required per bearing unit): two M8x16 BHCS, two M8 T-slot nuts, and two M8 flat washersOrdering InformationDescription Unit Weight Part #Linear Shaft 6, Hard Chrome Coated per meter* 0.22 kg/m 13-505Saw Cut for Linear Shaft 19-007Shaft Clamp 6 per meter 0.12 kg/m 13-106Saw Cut for Shaft Clamp 19-001Single Bearing Unit 6, Centric 1 pc 0.18 kg 30-401 Single Bearing Unit 6, Eccentric 1 pc 0.18 kg 30-403 Double Bearing Unit 6, Centric 1 pc 0.22 kg 30-402 Double Bearing Unit 6, Eccentric 1 pc 0.22 kg 30-404End Cap/ Lubricating System 6 1 set 20 g 30-407 Replacement Felt 6 1 pc 30-407Z5Fastening Set for Bearing Unit 6 1 set 40 g 20-007* Call for standard lengths in stock+0 -820-00713-505 Roller System 613-10630-40730-40230-40430-40130-403 218Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 219 Roller SystemsRoller System 14 # Description Part # Qty 1 80×40 Heavy Profile @ 1000mm 11-080 1 2 Shaft Clamp 14 @ 998mm 13-114 2 3 Linear Shaft 14 @ 998mm 13-514 2 4 160×28 Profile @ 140mm 11-128 1 5 End Cap 160×28 18-816 2 6 Double Bearing Unit 14 Eccentric 30-104 1 7 Double Bearing Unit 14 Centric 30-102 1 8 End Cap/Lubricating System 14 30-107 2 9 Reversing Unit 40 Spline 31-122 110 Reversing Unit 40 Idler 31-126 111 Universal Adapter Flange 31-014 112 Adapter Shaft, Blank 31-010 113 Timing Belt 25T10 @ 2300mm 31-052-1 114 Clamping Block for Belt 25T10 31-030 215 Fastening Set HD for Bearing Units 20-030 216 M6x20 Socket Head Cap Screw 24-320-6 117 HD T-Slot Nut St, M6 20-060 118 M6x120 Socket Head Cap Screw 24-3120-6 219 M6 Lock Nut 24-716-6 220 Limit Stop, Bi-Directional 31-038 121 M6x45 Socket Head Cap Screw 24-345-6 3Maximum stroke for configuration shown: with limit stop (31-038) – 765 mm without limit stop – 850 mm 3 218 Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 219Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USARoller Systems Roller System 1413-51313-114 30-10730-10230-10430-10130-103 ApplicationComponents for constructing Roller System 14 for medium duty applicationsTechnical DataLinear Shaft: Cf53 high grade carbon steel (AISI 1050)Precision ground to ISO h6 tolerance µm Roundness: 5 µm Parallelism: 8 µm/1000mm Surface quality: Ra 0.3µm (Rz 1.6µm) Hardness depth: minimum 0.6 mm Surface hardness: 670 to 840 HV (RC 59 to 65)Shaft Clamp: Al, anodizedBearing Units:Al, anodized housing, Roller 14 (30-108), Bolt 14 Centric (30-105) or Eccentric (30-106), and spacer (30-108z1)Preload range for eccentric bearing units ± 1.0 mmEnd Cap/ Lubricating System (set of left and right): glass-filled nylon, black; includes felt, spring, M8x10 BHCSFastening set (one required per bearing unit): two M8x18 BHCS, two M8 T-slot nuts HD, and two M8 safety spring washersOrdering InformationDescription Unit Weight Part #Linear Shaft 14, (Hard chrome coated) per meter* 1.21 kg/m 13-513Saw Cut for Linear Shaft 19-007Shaft Clamp 14 per meter 0.26 kg/m 13-114Saw Cut for Shaft Clamp 19-001Single Bearing Unit 14, Centric 1 pc 0.40 kg 30-101 Single Bearing Unit 14, Eccentric 1 pc 0.40 kg 30-103 Double Bearing Unit 14, Centric 1 pc 0.88 kg 30-102 Double Bearing Unit 14, Eccentric 1 pc 0.88 kg 30-104End Cap/ Lubricating System 14 1 set 50 g 30-107Replacement Felt 14 1 pc 30-107z1Fastening Set HD for Bearing Unit 1 set 40 g 20-030* Call for standard lengths in stock +0 -1120-030 220Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 221 Roller SystemsRoller System 14 HDSingle Bearing Units 14HD on 80×80 ProfileCarriage Plate: Length = L + 80 (T-slots parallel to 80×80 rail)Recommended hardware: four fastening sets HD for bearing units (20-030). Required machining – eight access holes through 160×28 profile.Required tools for assembly of Roller System 14HD: 5mm hexagon wrench (40-014), spanner wrench (40-032-14) 220 Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 221Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USARoller SystemsApplicationComponents for constructing Roller System 14 HD for medium and heavy duty applicationsTechnical DataLinear Shaft: Cf53 high grade carbon steel (AISI 1050)Precision ground to ISO h6 tolerance µm Roundness: 5 µm Parallelism: 8 µm/1000mm Surface quality: Ra 0.3µm (Rz 1.6µm) Hardness depth: minimum 0.6 mm Surface hardness: 670 to 840 HV (RC 59 to 65)Shaft Clamp: Al, anodizedBearing Units: Al, anodized housing, Roller 14 (30-108), Bolt 14 Centric (30-105) or Eccentric (30-106), one spacer per roller (30-114z3), M8x12 nylon tipped set screw (24-689) for eccentric only, End Cap/ Lubricating SystemPreload range for eccentric bearing units ± 1.0 mmEnd Cap/ Lubricating System: Trespa cap with pin, felt, spring, M8x10 BHCS, M4x10 set screw, and access plugOrdering InformationDescription Unit Weight Part #Linear Shaft 14, Hard Chrome Coated per meter* 1.21 kg/m 13-513Saw Cut for Linear Shaft 19-007Shaft Clamp 14 per meter 0.25 kg/m 13-114Saw Cut for Shaft Clamp 19-001Single Bearing Unit 14 HD, Centric 1 pc 0.58 kg 30-111 Single Bearing Unit 14 HD, Eccentric 1 pc 0.58 kg 30-113End Cap, LR14 HD, Single 1 pc 30-503z6 Replacement Felt 14HD 1 pc 30-114z5* Call for standard lengths in stock +0 -11 Roller System 14 HDNote: T-slot on top are 40 series, on two sides are 28 series13-51313-114 30-11130-11330-503z6 222Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 223 Bearing Unit 30-40230-40430-40130-403 30-10230-10430-10130-103Ordering InformationDescription Unit Weight (kg) Part #Bearing Unit, Double 6, Centric each 0.22 30-402 Bearing Unit, Double 6, Eccentric each 0.22 30-404Bearing Unit, Single 6, Centric each 0.18 30-401 Bearing Unit, Single 6, Eccentric each 0.18 30-403Bearing Unit, Double 14, Centric each 0.88 30-102 Bearing Unit, Double 14, Eccentric each 0.88 30-104Bearing Unit, Single 14, Centric each 0.40 30-101 Bearing Unit, Single 14, Eccentric each 0.40 30-103Bearing Unit, Single 14HD, Centric each 0.58 30-111 Bearing Unit, Single 14HD, Eccentric each 0.58 30-113 30-11130-113Linear Roller Systems 222 Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 223Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USARoller SystemsTechnical DataSt, 100 Cr6, ground and hardened, double ball bearing with two shields, maintenance free Technical Data St, black oxideOrdering InformationTechnical DataSt, black oxide Ordering Information TypeEccentricity(mm)Used in Bearing UnitsWeight(g)Part #6-CentricN/A30-401, 30-402630-0066-Eccentric0.4530-403, 30-404630-00714-CentricN/A30-101, 30-102, 30-1114830-10514-Eccentric1.030-103, 30-104, 30-1134630-106 Dimensions (mm) Used with Qty Required I.D. O.D. Thickness per Roller Part # 12 18 1.0 Bolt 14 Centric & Eccentric 1 30-108Z1 10.2 19 1.1 Bolt 14 HD Centric & Eccentric 1 30-114Z3 Components for Bearing UnitsTrack RollersBoltsSpacers30-00730-00630-10530-106 Dimensions (mm) Load (N) Maximum Weight Shaft Dia d2 a b1 b2 Dynamic Static RPM (g) Part # 6 5 10.5 8 7 1600 900 5000 7 30-008 14 12 24 20 18 10800 6400 2500 88 30-108 Ordering Information 224Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 225 Roller SystemsLinear Drive Components 2 31 Timing Belt Reversing Unit 40 for driving or reversing the timing belt2 Timing Belt Clamp and Tensioner3 Multi-Spline Shaft 123 1Design Examples 1-2 Construction with one axis of movement3 Construction with two axes of movement. NOTE: Timing Belt Reversing Units are not structural elements. ALL MOTORS MUST BE PROPERLY SUPPORTED. 224 Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 225Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USARoller SystemsApplicationTo drive and reverse timing belt 25T10 for precise linear motion using profiles and linear guides. Choice of drive pulleys with spline 6x11x14mm ISO14 with Ø8H7 or Ø19. Pulley with 8mm bore can be drilled to max. Ø15mm. Housing accommodates attachment of drive motor adapter flange or serial connection of multiple reversing units. Reversing Unit 40 can be mounted to the end of profile directly or with Mounting Plate [31-129]. Mounting Plate is designed for center mount of Reversing Units 40 to end of 80×80 or 160×80 Profile with belt running on 80mm side.Technical DataDie cast zinc, black coatedPulley: St, black oxide, Pitch – 10 mm, Teeth – 15 (one revolution corresponds to 150mm), Pitch Dia. 47.75 mmMaximum load MD = 20 Nm (14.7 ft-lb)Belt length inside reversing unit depends on type of connection: 90° connection – 140 mm 180° connection – 160 mmComplete with two Profile-to-Wall fasteners and ten access hole plugs. Mounting Plate 31-129:Al, anodizedOrdering InformationDescription Pulley Unit Weight Part #Reversing Unit 40 Spline 1 set 1.85 kg 31-122 8mm Bore 1 set 1.85 kg 31-124 Idler 1 set 1.85 kg 31-126Mounting Plate, Rev. Unit 40 1 pc 0.40 kg 31-129Fastening Set for Mounting Plate RU40 1 set 20-129Pulley, 8mm Bore Reversing Unit 40 each 31-125Pulley, Idler Reversing Unit 40 each 31-127Pulley, Spline Reversing Unit 40 each 31-1231 Attachment of Reversing Unit 40 to a profile (mounting hardware included).2 Two Reversing Units 40 with belts running on opposite sides of 80×80 profile3 Reversing Units 40 with a common spline connection4 Top of profile needs a 3mm radius to prevent belt chatter5 Mounting the Reversing Unit 40 to an 80×80 or 160×80 profile with the belt running on the 80mm side (requires mounting plate 31-129 and fastening set 20-129). 1 5 423 Reversing Unit 40 31-129 226Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 227 Roller Systems ApplicationFor attaching timing belt to a carriage slide and providing tensioning adjustment. Each end of belt requires clamping block. Tensioning block may be used on one or both ends of the belt.1 Two Clamping Blocks used for belt clamping and tensioning. Order all hardware separately.2 Two Clamping Blocks and one Tensioner used for belt tensioning. Used when design does not permit the belt ends to come close. Tensioning block includes all hardware. Order screw and T-nut separately for attaching stationary clamping block (on the right). 3 Using two Clamping Blocks and two Tensioners is recommended for long linears (over 3.5 M) to allow proper belt tensioning. Order M8 screws separately.Technical DataAl, black anodizedTensioner includes: one M6x25 SHCS and one M6 T-slot Nut HD for attachment to base plate, two M6 lock nuts and two M6x80 SHCS.Ordering InformationDescription Unit Weight Part #Clamping Block, Belt 25T10 1 set 62 g 31-030Tensioning Block 1 set 92 g 31-031 123ApplicationFlexible, heavy duty transmission belt to convert the rotation of a drive motor into linear motion. Total length depends on profile length and amount of belt contained inside reversing unit. Pretensioning is determined by a the maximum operating peripheral force.Ordering InformationDescription Unit Part #Hi-Flex Timing Belt 25T10 per meter, max. 50m 31-052-1 Technical DataPolyurethane, steel reinforcedMaximum tensile load: 2,400 NTemperature range: 0°C to +80°C For two pulley drives pre-tension force: Fv/0.5 Fu (Fu – peripheral force)Pre-tension elongation (Dl) in mm per meter (L): Dl Fv L 600 = Clamping and Tensioning Blocks31-03031-031Hi-Flex Timing Belt 31-052-1 226 Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 227Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USARoller Systems ApplicationTo define mechanically the limits of travel. The rubber shock absorber provides for a cushioned end stop.Technical Data31-037:M8 T-slot nut HD w/retainer spring, M8x8 cup point set screw, rubber shock absorber, two M8 T-slot nuts, M8x44 set screw, M8 washer, M8 flange nut31-038: two M8 T-slot nuts HD w/retainer spring, two M8x8 cup point set screws, two rubber shock absorbers, three M8 T-slot nuts, M8x44 set screw, M8 washer, M8 flange nutOrdering InformationDescription Unit Weight Part #Limit Stop – One Direction 1 set 65 g 31-037Limit Stop Bi-Directional 1 set 93 g 31-038Rubber Shock Absorber (40mm long) each 31-037Z3ALimit Stop 31-03731-038Bumpers ApplicationTo mechanically limit the travel of a carriage. The rubber shock absorber provides for a cushioned end stop.Technical DataBumper kit complete with all mounting hardware. Mounts directly to reversing unit. Ordering InformationDescription Unit Weight Part #Bumper 1 Set 0.15 kg 31-80831-808 113.7 40.0 20.2 228Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 229 Roller SystemsProximity Switch 31-03631-03331-035ApplicationProximity switches determine the limits of travel or provide reference positions.Exciter cams actuate inductive proximity switch, pressed into the flat surface of the timing belt.Mounting element provides attachment of proximity switches on reversing unit 40.Technical DataInductive proximity switch in PNP sequence with LED indicator. Maximum sensing distance: 1.5 mm Output function: Normally Open Supply voltage: 10-30 VDC Includes two lock washers (must be used) and two hex nutsExciter Cam: St, blackMounting Element: St, zinc plated Includes two hex bolts M8x1x16 [31-036z2]131 Attachment of proximity switches when exciter does not run through reversing unit.2 Attachment of both proximity switches for simplified control wiring installation on drive side of platform.3 Attachment of both proximity switches on drive side of platform using mounting element [31-036].2Ordering InformationDescription Unit Weight Part #Proximity Switch 1 pc 65 g 31-035Exciter Cam 1 pc 1 g 31-033Mounting Element for Proximity Switch 1 set 43 g 31-036 228 Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 229Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USASpline ShaftShafts & Clamp 13-50513-51313-524Linear Roller Systems 13-10613-11413-125Ordering InformationDescription Unit Weight Part #LR Spline Shaft per meter* 0.92kg/m 13-566Saw cut necessary for cutt off 19-007*Call for maximum lengths in stockOrdering InformationDescription Unit Weight Part #Shaft Clamp Profile 6 meter 0.12 kg 13-106*Shaft Clamp Profile 14 meter 0.26 kg 13-114*Shaft Clamp Profile 25 meter 1.01 kg 13-125*Shaft Clamp Saw Cut To Length each 19-001Shaft Size 6 meter 0.22 kg 13-505**Shaft Size 14 meter 1.21 kg 13-513**Shaft Size 25 meter 3.83 kg 13-524**Shaft Cut To Length each 19-007 * Max Length = 3m** Max Length = 6mApplicationTo connect multiple reversing units 40 for generation of synchronous motion cycles such as required for gantry applications.Technical DataCold drawn steel, 1045, 6x11x14 ISO 14, DIN 5463Max. recommended length wiuthout bearing support: 500mm horiz.13-566 230Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsLinear ApplicationsCatalog 1816-3/US 231 End CapsOrdering InformationDescription Unit Weight Part #End Cap, Lubricating System 6 set (R&L) 0.02 kg 30-407End Cap, Lubricating System 14 set (R&L) 0.05 kg 30-107End Cap, Lubricating System 14 HD 30-503z6End Cap, Lubricating System 25 set (R&L) 30-207Replacement Felt Insert 6 each 30-407z5Replacement Felt Insert 14 each 30-107z1Replacement Felt Insert 14HD each 30-114z5Replacement Felt Insert 25 each 30-207z1Linear Roller Systems30-407 30-10730-503z6 30-207 230 Industrial Profile SystemsServices, Tips & ToolsCatalog 1816-3/US 231Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USASection 9Services, Assembly Tips & ToolsDescription Unit Part #Saw cut up to 80x40mm or 3″ x 1.5″ size profiles ………………………….per cut ……….19-001Saw cut up to 80x80mm or 3″ x 3″ size profiles …………………………….per cut ……….19-002Saw cut, 160×28 thru 160×80 or 6″ x 1.5″ profiles …………………………per cut ……….19-003Drill and Counter Bore for BHCS or SHCS …………………………………….each …………19-004Drill and Counter Sink for FHCS …………………………………………………..each …………19-006Saw cut for Linear Shafts…………………………………………………………….each …………19-007Tap Profile End 5/16-18 …………………………………………………………….each …………19-009Tap Profile End M8 ……………………………………………………………………each …………19-010Drill 7mm (0.277″) Access Hole ……………………………………………………each …………19-011Drill & Tap for M5, M6, M8, M10, #10-32, 1/4-20, 5/16-18, 3/8-16 …….each …………19-012Drill & Tap for M3 or M4 ………………………………………………………………each …………19-013Drill and Tap M12, M16, 1/2-13, or 5/8-18 …………………………………….each …………19-014Step Drill for Universal Fastener (all profiles) …………………………………each …………19-015Drill and Tap M8 (5/16-18 x 1.5″) for Knuckle Foot ………………………….each …………19-016Drill and Tap M10 (3/8-16 x 2″) for Knuckle Foot ……………………………each …………19-017Service for dowel (securing Linear Shaft) ………………………………………each …………19-019Drill 22.5mm hole for 1/4-turn Handle……………………………………………each …………19-018Drill 20mmx6mm (3/4″ x 1/4″) for Pneu. Universal Fastener …………….each …………19-020Drill 0.375″ or 0.500″ hole for Ball Plunger …………………………………….each …………19-022Drill Through Hole for Side Mounting Knuckle Foot …………………………each …………19-023Drill 7mm (0.277″) Access Hole through 160mm (6″) side ……………….each …………19-025Panel – Packaging for secure transport ……………………………………..1 package ……..19-026Panel – Drill thru panel up to 10mm (3/8″) for screws ……………………..each …………19-027Panel – Chamfer Corner ……………………………………………………………..each …………19-029Panel – Notch Corner …………………………………………………………………each …………19-030Panel – Special Service Cut ………………………………………………………..each …………19-031Panel – Cut to Size …………………………………………………………………….each …………19-032Mill Square up to 80×40 (3″ x 1.5″) ……………………………………………..per end ……….19-100Mill Square up to 80×80 (3″ x 3″) ………………………………………………..per end ……….19-101Mill Square up to 160×80 (6″ x 1.5″) ……………………………………………per end ……….19-102Drill/Tap/Mill for Roller PA ……………………………………………………………each …………19-103Special Miter Cut ……………………………………………………………………..per cut ……….19-10445° Miter Cut up to 80×80 (3″ x 3″) ………………………………………………per cut ……….19-10545° Miter Cut, 6″ x 1.5″ Profile …………………………………………………….per cut ……….19-106Miter Connection Counter Bore ……………………………………………………each …………19-211Drill hole 8.4mm for Slide Block Brake ………………………………………….each …………19-140Processing ServicesServices 232Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsServices, Tips & ToolsCatalog 1816-3/US 233 Profile ServiceSaw Profile to LengthA cut to length extrusion profile can be ordered by specifying this machining service.Tolerances: Length = ±.04 mm (±0.015 in) Squareness = ±.004 cm/cm (±0.003 in/in)Maximum Length*: 6000 mm (240 in) for all profiles, except as noted otherwiseOrdering Note:Saw cut requirements should be described by specifying the machining service number and length of cut required, in milliimeters or inches.Example:A project requires 4 pieces of the 80 x 80 profile, saw cut to a length of 1500 mm each. These profiles would be ordered as follows:Line 1 – Specify the total quantity required: Part No. = 10-088, Quantity = 4@1500mmLine 2 – Specify machining services required: Machining Service No. = 19-002 Quantity = 4 Tap Profile EndThis machining service provides one or more tapped holes (M8, M10 or 5/16-18) at the end of an extrusion profile. Ordering Note:Profile end tapping requirements should be described by specifying the machining service number and the end(s) at which the tapped hole is required. See pages 233-234 for locator drawings of the extrusion ends.Example:A length of 11-040 profile requires tapping at each end for attachment of the M8 End Fastener Assembly. This machining service would be ordered as follows: Machining Service No. = 19-010@A1, 19-010@A2In this example, there would be charges for two profile end tapping services: 19-010, Quantity = 2 Step DrillThis service provides one or more blind holes on the profile T-slot. These holes can accommodate the Universal or Butt Fasteners for both metric or inch extrusions. Ordering Note:Profile step drill requirements should be described by specifying the machining service number and the end(s) at which the drill is required. See pages 233-234 for locator drawings of the extrusion ends.Example:Two lengths of 11-080 profile require Butt Fasteners to connect to each other. This machining service would be ordered as follows: Machining Service No. = 19-015@A3, A6 19-015@B3, B6In this example, there would be charges for step drill services: 19-015, Quantity = 4 232 Industrial Profile SystemsServices, Tips & ToolsCatalog 1816-3/US 233Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USASurface Locations 28 x 28 Profiles40 x 40 Profiles28 x 56 Profiles40 x 80 Profiles40 x 120 Profiles40 x 160 Profiles56 x 56 Profiles80 x 80 Profiles80 x 160 ProfilesProfile Service 234Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsServices, Tips & ToolsCatalog 1816-3/US 235 Quarter Round Profile Surface Locations45° Angled ProfileMono Slot ProfileBi-Slot Corner ProfileBi-Slot Mid-Frame ProfileTri-Slot ProfileTri-Slot Corner Profile80x40Bi-Slot Mid-Frame Profile28x56Quad-Slot Profile28x56Profile Service 234 Industrial Profile SystemsServices, Tips & ToolsCatalog 1816-3/US 235Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USAPanel ServiceChamfer Corner for End Fastener ClearanceChamfer gives clearance for end fastener. This service is needed only when panels are installed in T-slots. Profiles 20 and 1″ use 3mm thick panel with 3mm panel gasket.Service 19-029Dimensions ProfileA4010.2 (0.400″)3010.2 (0.400″)286.40 (0.250″)206.40 (0.250″)1.5″10.2 (0.400″)1″8.2 (0.325″)Notch Corner for Anchor Fastener ClearanceNotch gives clearance for anchor fastener. This service is needed only when panels are installed in T-slots. Profiles 1″ use 3mm thick panel with 3mm panel gasket.Service 19-031Dimensions ProfileAB4012.7 (0.500″)44.50 (1.750″)3012.7 (0.500″)44.50 (1.750″)288.90 (0.350″)41.40 (1.630″)1.5″12.7 (0.500″)44.50 (1.750″)1″8.20 (0.325″)25.40 (1.000″) Notch Corner for Extrusion ClearanceNotch gives clearance for perpendicularly mounted extrusions. This service is needed only when panels are installed in T-slots. Profiles 20 and 1″ use 3mm thick panel with 3mm panel gasket.Service 19-030Dimensions ProfileA4010.2 (0.400″)3010.2 (0.400″)286.40 (0.250″)206.40 (0.250″)1.5″10.2 (0.400″)1″8.2 (0.325″) A A A A A B 236Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsServices, Tips & ToolsCatalog 1816-3/US 237 Panel and Gasket Cutting and InstallationCut chamfers at panel corners that are adjacent to standard fasteners. Chamfer should be at 45° angle (approx.) and should be cut according to detail on page 235.Measure the length of each side of the panel and cut the gasket to those lengths. Then cut each end of the gasket as shown above. Two 45° angle cuts will insure proper fit. Then slide the cut gasketing onto the side of the panel.With the gasketing mounted on the panel, insert the panel into the slot of the extrusion. By loosening the standard fasteners that hold the extrusions together, the panel will be allowed to slide more freely into place. Gently tapping the extrusion into place and tightening the extrusions back together will insure a tight fitting panel.Pre-Assembly Instructions and Tips1. Upon receipt of your order, check to see that you have received a complete kit with numbered components. All extrusions are clearly marked with a number designation. Sort all the extrusions according to these designations. If a drawing was supplied, these numbers will correspond with the numbers shown on the drawing and also with those on the bill of materials.2. Assembly should be performed on a flat surface as this helps insure proper alignment and perpendicularity of the frame.3. Thread all end fasteners into tapped ends of extrusions but do not tighten the bolts.4. Pre-assemble all joiner plates, gussets, brackets, wire mesh clamps and anchor fastener assemblies but do not tighten the bolts.5. If economy T-nuts are being used on joiner plates, gussets, brackets and any accessories which are to be mounted between end fastenings of the main assembly, then these systems of the T-nut should be installed in the proper T-slot at this time.6. Install all wheels, leveling feet, hinges, handles and end caps after the main frame is constructed.7. If solid panels are part of the installation, they should be installed in the T-slot after three sides of its frame have been formed. If panel gasket [12-106] is being used, it should be wrapped around the panel, notched at each corner and then slid into the extrusion’s “u-shaped” frame.8. Use a rubber mallet when installing panels and tap panels evenly to insure that they seat to depth within the T-slot. Panel Gasket[12-106]45°45°Gasket EndCuts DetailGasket Assembly Tips 236 Industrial Profile SystemsServices, Tips & ToolsCatalog 1816-3/US 237Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Drilling JigsStd. Connection ApplicationFor precise location of 20mm dia. step bore for the universal connection, and the 7mm access hole for the standard connection on a drill press.Technical DataPlastic base plateAl, anodized stop blockZn cast, black hingeOrdering InformationDescription Unit Weight Part #Drilling Jig 40, Univ. Connection 1 pc 2.35 kg 40-015Ordering InformationDescription Unit Weight Part #Drilling Jig 40, Std. Connection 1 pc 0.19 kg 40-010Drilling Jig 80, Std. Connection 1 pc 0.36 kg 40-011Drilling Jig 28, Std. Connection 1 pc 0.12 kg 40-027Drilling Jig 30, Std. Connection 1 pc 40-03040-03040-011ApplicationFor precise location of 7mm access hole for standard connections.Technical DataAl, anodizedGround and hardened drill bushings with locations 28, 30 and 40mm between access holes. Clamping “T” bolt for firm attachment.40-027 40-010Drilling JigUniversalConnection 40-015Tools 238Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsServices, Tips & ToolsCatalog 1816-3/US 239 Technical DataHigh performance, high speed steel, nitrated. #2 Morse Taper or 0.5” dia. with three flats.ApplicationUsed for drilling 20 mm diameter step bore for universal or butt fastener with 40, 30 or 28 series profiles.Step Drill 7x20Univ. Connection Step Drill 9x15ApplicationUsed for drilling and counter boring profile for M8 or 5/16-18” BHCS or SHCS.Technical DataHigh performance, high speed steel, nitrated. Straight shank.Ordering InformationDescription Unit Weight Part #Step Drill 9×15 1 pc 0.15 kg 40-025 Ordering InformationDescription Unit Weight Part #Step Drill 7×20, #2 Morse Taper 1 pc 0.26 kg 40-023Step Drill 7×20 with 3 Flats 1 pc 0.19 kg 40-02440-02340-024 Drilling Jig Clamp Profile 40x40ApplicationFor precise location clearance hole and counter bore for M8 or 5/16-18” BHCS or SHCS on Clamp Profile 40×40.Technical DataAl, anodizedDrill bushing hardened and polished.Includes depth limit for step drill (40-025).Ordering InformationDescription Unit Weight Part #Drilling Jig, Clamp Profile 40×40 1 pc 0.49 kg 40-02640-02640-025Tools 238 Industrial Profile SystemsServices, Tips & ToolsCatalog 1816-3/US 239Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA6.8mm Drill BitApplicationTap drill size for M8x1.25 and drill size for standard fastener access hole.Ordering InformationDescription Unit Weight Part #6.8mm Drill Bit 1 pc 20 g 40-018Technical Data6.8mm drill, right hand, jobbers length High speed steelTapApplicationTooling to provide M8 tap in profile face holes for standard fastening set.Technical DataM8x1.25 tap, right hand High speed steelOrdering InformationDescription Unit Weight Part #M8x1.25 Tap 1 pc 25 g 40-0165/16-18 Tap 1 Pc 25 g 40-516 Technical DataChrome vanadium steel, nickel plated Acetate handleApplicationFor tightening of standard and universal connections.Ordering InformationDescription Unit Weight Part #Hex 5 Wrench with T-Handle 1 pc 26 g 40-0123/16″ Wrench with T-Handle 1 pc 26 g 40-0441/4″ Wrench with T-Handle 1 pc 26 g 40-046T-Handle Wrench Ball-Headed WrenchTechnical DataChrome vanadium steel, nickel plated Plastic handleApplicationFor tightening of standard and universal connections.Ordering InformationDescription Unit Weight Part #5mm Wrench with Ball Head 1 pc 50 g 40-0136mm Wrench with Ball Head 1 pc 50 g 40-0223/16″ Wrench with Ball Head 1 pc 50 g 40-0471/4″ Wrench with Ball Head 1 pc 50 g 40-048 40-01340-02240-04740-04840-01240-04440-046 Tools 40-01640-51640-018 240Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsServices, Tips & ToolsCatalog 1816-3/US 241 Spanner WrenchesApplicationDesigned for tightening spanner nuts on linear guide systems 14 and 25.Description Unit Weight Part #Adj. Spanner Wrench for Linear 14 1 pc 0.11 kg 40-017Pin Socket Wrench 1 pc 0.08 kg 40-029Spanner Wrench for Linear 14 1 pc 0.04 kg 40-032-14Spanner Wrench for Linear 25 1 pc 0.10 kg 40-032-2540-01740-032-25Technical DataSt, black or brown finish tempered with spot welded pins40-029: Al, black anodizedSteel pins 40-02940-032-14Tools 240 Industrial Profile SystemsIndexCatalog 1816-3/US 241Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA IndexPart # Description Page # Part # Description Page #Part Number10-016 …….. 16X40 ………………………………………………………………..2410-036 …….. Post 36X36 …………………………………………………………3110-040 …….. 40X40 Standard ………………………………………………….1910-040B …… 40X40 Standard (Black) ……………………………………….1910-043 …….. 40X40 Quarter Round ST …………………………………….2110-044 …….. 40×40-45 Degrees Standard …………………………………2210-045 …….. 40X45 Degrees Standard ……………………………………..2210-080 …….. 80X40 Standard ………………………………………………….2610-080B …… 80X40 Standard (Black) ……………………………………….2610-081 …….. 16X80 ………………………………………………………………..2410-083 …….. R40X80 30 Degrees Standard ………………………………2310-085 …….. R40X80 45 Degrees Standard ………………………………2310-086 …….. R40X80 60 Degrees Standard ………………………………2310-088 …….. 80X80 Standard ………………………………………………….2710-088B …… 80X80 Standard (Black) ……………………………………….2710-089 …….. R40X80 90 Degrees Standard ………………………………2310-120 …….. 120×40 Standard …………………………………………………2810-140 …….. 40X40 Bi-Slot Corner …………………………………………..2010-1515 …… 1.5″X1.5″ ……………………………………………………………4510-1530 …… 1.5″X3.0″ ……………………………………………………………4810-1543 …… 1.5″X1.5″ Quarter Round ……………………………………..4710-1560 …… 1.5″X6.0″ ……………………………………………………………5010-1591 …… 1.5″X1.5″ Mono-Slot …………………………………………….4610-1592 …… 1.5″X1.5″ Bi-Slot Corner ……………………………………….4610-1593 …… 1.5″X1.5″ Tri-Slot …………………………………………………4610-1594 …… 1.5″X1.5″ Bi-Slot Mid-Frame ………………………………….4610-160 …….. 160×80 Standard …………………………………………………2910-161 …….. 16X160 ………………………………………………………………2410-164 …….. 160×40 Standard …………………………………………………2810-180 …….. 80X40 Tri-Slot Corner …………………………………………..2610-240 …….. 40X40 Bi-Slot Mid-Frame ……………………………………..2010-3030 …… 3.0″X3.0″ ……………………………………………………………4910-340 …….. 40X40 Tri-Slot ……………………………………………………..2010-380 …….. 40X80 Quad-Slot …………………………………………………2610-440 …….. 40X40 Mono-Slot…………………………………………………2010-540 …….. 40X40 Light ………………………………………………………..1910-540B …… 40X40 Light (Black) ……………………………………………..1910-680 …….. 80X40 Light ………………………………………………………..2611-040 …….. 40X40 Heavy ………………………………………………………1911-056 …….. Post 56X56 ………………………………………………………..3111-080 …….. 80X40 Heavy ………………………………………………………2611-084 …….. 80X80X40 Corner Heavy ……………………………………..3011-088 …….. 80X80 Heavy ………………………………………………………2711-089 …….. 80X80 Extra Heavy ……………………………………………..2711-100 …….. 40X100 Heavy …………………………………………………….2511-122 …….. 80×120 Heavy …………………………………………………….2711-128 …….. 28X160 ………………………………………………………………2511-140 …….. 160×40 Heavy …………………………………………………….2811-1515 …… 1.5″X1.5″ Heavy ………………………………………………….4511-1530 …… 1.5″X3.0″ Heavy ………………………………………………….4811-160 …….. 160×80 Heavy …………………………………………………….2911-3030 …… 3.0″X3.0″ Heavy ………………………………………………….4911-540 …….. 40X40 Heavy Square …………………………………………..3112-010 …….. Profile Mesh Clamp ……………………………………………..5812-011 …….. Profile Stiffener / Handle ………………………………………5712-012 …….. Profile Sliding Door Guide 40 Upper ………………………5612-013 …….. Profile Sliding Door Guide 40 Lower ………………………5612-014 …….. Profile Sliding Door Guide 30/28 Upper ………………….5612-015 …….. Profile Sliding Door Guide 30/28 Lower ………………….5612-016B …… Profile Panel Holder (Black) ………………………………….5712-020 …….. 20X20 ……………………………………………………………….4212-022 …….. Profile Rolling Door Guide …………………………………….5512-028 …….. 28X28 Quad-Slot …………………………………………………3712-028B …… 28X28 Quad-Slot (Black) ………………………………………3712-030 …….. 30X30 ………………………………………………………………..3312-032 …….. 18X32 Bi-Slot ……………………………………………………..5412-033 …….. 30X30 Quarter Round ………………………………………….3412-034 …….. 30X30 Bi-Slot Corner …………………………………………..3312-040 …….. 40X40 20 Series ………………………………………………….4312-044 …….. 28X28 45 Deg rees……………………………………………….3912-056 …….. 56X56 ………………………………………………………………..3712-060 …….. 30X60 ………………………………………………………………..3512-101 …….. Cover/Gasket Strip 40 Series (Clear) ……………………..6212-1010 …… 1.0″X1.0″ ……………………………………………………………5212-101B …… Cover/Gasket Strip 40 Series (Black) ……………………..6212-101G …… Cover/Gasket Strip 40 Series (Gray) ………………………6212-101Y …… Cover/Gasket Strip 40 Series (Yellow) ……………………6212-102 …….. Cover Strip 40 Series (Aluminum) ………………………….6212-1020 …… 1.0″X2.0″ ……………………………………………………………5212-103B …… Cover/Gasket Strip 28 Series (Black) ……………………..6212-105 …….. Profile Clamp Bar ………………………………………………..5812-106 …….. Panel Gasket 8 ……………………………………………………6112-107 …….. Mesh Gasket 8 ……………………………………………………6112-108 …….. Panel Gasket 10 ………………………………………………….6112-109 …….. Profile Rack Angle with Holes ……………………………….5912-110 …….. Profile Rack Angle no Holes ………………………………….5912-111 …….. Cover Strip 40 Series (PVC Clear) …………………………6212-111B …… Cover Strip 40 Series (PVC Black) …………………………6212-111BL …. Cover Strip 40 Series (PVC Blue) ………………………….6212-111Y …… Cover Strip 40 Series (PVC Yellow) ………………………..6212-113 …….. Safety Cover Strip ……………………………………………….6212-114 …….. Anti-Skid Cover 40 Series …………………………………….6012-115 …….. Cover/Gasket Strip 20 Series (Clear) ……………………..6212-115B …… Cover/Gasket Strip 20 Series (Black) ……………………..6212-116 …….. Cover Strip 30/28 Series (Clear) ……………………………6212-116B …… Cover Strip 30/28 Series (Black) ……………………………6212-117-3 ….. Push-In Panel Seal (3mm) ……………………………………6212-117-6 ….. Push-In Panel Seal (6mm) ……………………………………6212-120 …….. 20X10 ………………………………………………………………..4212-124 …….. 20X40 ……………………………………………………………….4212-128 …….. 28X28 Tri-Slot ……………………………………………………..3812-1515 …… 1.5″X1.5″ Light …………………………………………………….4512-1530 …… 1.5″X3.0″ Light …………………………………………………….4812-2020 …… 2.0″X2.0″ ……………………………………………………………5212-228 …….. 28X28 Bi-Slot ……………………………………………………..3812-328 …….. 28X28 Bi-Slot Mid-Frame ……………………………………..3812-400 …….. Slide Bar UHMW …………………………………………………6012-410 …….. Slide Strip UHMW ……………………………………………….6012-420 …….. Slide Bar UHMW 40X10 ………………………………………6012-421 …….. Guide Profile UHMW ……………………………………………5512-428 …….. 28X56 Open Slot …………………………………………………3712-430 …….. Slide Bar UHMW 28/30X8 …………………………………….6012-628 …….. 28X56 Bi-Slot ……………………………………………………..4012-728 …….. 28X56 Quad-Slot …………………………………………………4013-012 …….. Handle, Tube Style Coated Steel Tubing ……………….13313-106 …….. Roller System 6, Shaft Clamp ……………………………..22913-114 …….. Roller System 14, Shaft Clamp ……………………………22913-125 …….. Roller System 25, Shaft Clamp ……………………………22913-505 …….. Roller System 6, Linear Shaft………………………………22913-513 …….. Roller System 14, Linear Shaft…………………………….22913-524 …….. Roller System 25, Linear Shaft…………………………….22913-566 …….. Spline Shaft, LR ………………………………………………..22914-100 …….. Conv Roller Track 7/8″ Dia …………………………………..20314-248 …….. Profile Rail 40X80, Clear …………………………………….12815-040 …….. Conduit Support 40 ……………………………………………..7015-041 …….. Conduit Support 40 with T-Slots …………………………….7015-042 …….. Conduit Wall Duct 40 ……………………………………………7115-080 …….. Conduit Support 80 ……………………………………………..7015-082 …….. Conduit Wall Duct 80 ……………………………………………7115-120 …….. Conduit Support 120 ……………………………………………70 242Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsIndexCatalog 1816-3/US 243 Part # Description Page #Part # Description Page # Part Number15-122 …….. Conduit Wall Duct 120 ………………………………………….7115-160 …….. Conduit Support 160 ……………………………………………7015-161 …….. Conduit Support 160 with T-Slots …………………………..7015-803 …….. Conduit Cap 40×40………………………………………………7215-804 …….. Conduit Cap 40×80………………………………………………7215-805 …….. Conduit Cap 80×80………………………………………………7215-806 …….. Conduit Cap 40×160…………………………………………….7215-807 …….. Conduit Cap 80×160…………………………………………….7215-810 …….. Conduit Cap 40×120…………………………………………….7215-811 …….. Conduit Cap 80×120…………………………………………….7215-812 …….. Conduit Cap 120×120…………………………………………..7215-813 …….. Conduit Cap 120×160…………………………………………..7218-1010 …… End Cap 1.0″x1.0″ ……………………………………………….6418-1020 …… End Cap 1.0″x2.0″ ……………………………………………….6418-1515 …… End Cap 1.5″x1.5″ ……………………………………………….6418-1530 …… End Cap 1.5″x3.0″ ……………………………………………….6418-1543 …… End Cap 1.5″x1.5″ Quarter Round …………………………6418-2020 …… End Cap 2.0″x2.0″ ……………………………………………….6418-3030 …… End Cap 3.0″x3.0″ ……………………………………………….6418-710 …….. Access Hole Plug, 7mm Plastic……………………………..6318-712 …….. Corner Connector Plug 28 ……………………………………9918-713 …….. Access Hole Plug, 7mm Nickel ……………………………..6318-715 …….. End Cap Push-in Fastener ……………………………………6518-802 …….. End Cap 20×20……………………………………………………6318-803 …….. End Cap 30×30……………………………………………………6318-805 …….. End Cap 40×40 Heavy Square ………………………………6318-806 …….. End Cap 160×16………………………………………………….6318-807 …….. End Cap 32×18……………………………………………………6318-808 …….. End Cap 28×28……………………………………………………6318-809 …….. End Cap 28×56……………………………………………………6318-811 …….. End Cap 40×16……………………………………………………6318-812 …….. End Cap 80×16……………………………………………………6318-813 …….. End Cap 40×40……………………………………………………6318-814 …….. End Cap 40×80……………………………………………………6318-815 …….. End Cap 80×80……………………………………………………6318-816 …….. End Cap 160×28………………………………………………….6318-817 …….. End Cap 40×160………………………………………………….6318-818 …….. End Cap 80×160………………………………………………….6318-819 …….. End Cap 56×56 (Post Profile) ………………………………..6318-820 …….. End Cap 40×40-45 Degree s …………………………………..6318-821 …….. Connector Cap 40, Radius ……………………………………9818-822 …….. Connector Cap 40, 3×45 Degree s ………………………….9818-826 …….. Corner Connector 40, 2-Way ………………………………..9918-827 …….. Corner Connector 40, 3-Way ………………………………..9918-829 …….. Corner Connector 28, 3-Way ………………………………..9918-830 …….. End Cap 20×10……………………………………………………6318-831 …….. End Cap 20×40……………………………………………………6318-832 …….. End Cap 40×40 (20 Series) …………………………………..6318-838 …….. End Cap 30×30, Quarter Round …………………………….6318-840 …….. End Cap 40×120………………………………………………….6318-841 …….. End Cap 80×120………………………………………………….6318-842 …….. Connector Cap 40, Square……………………………………9818-843 …….. End Cap 40×40 Quarter Round ……………………………..6318-844 …….. End Cap 28x28x45 Degree s. …………………………………6318-845 …….. End Cap 40-45o ………………………………………………….6318-852 …….. Corner Connector 20, 2-Way ………………………………..9918-853 …….. Corner Connector 20, 3-Way ………………………………..9918-863 …….. End Cap 30×60……………………………………………………6318-872 …….. Corner Connector 1.0″, 2-Way ………………………………9918-873 …….. Corner Connector 1.0″, 3-Way ………………………………9918-883 …….. End Cap R40/80-30 Degrees ………………………………..6318-885 …….. End Cap R40/80-45 Degrees ………………………………..6318-886 …….. End Cap R40/80-60 Degrees ………………………………..6318-892 …….. Corner Connector 1.5″, 2-Way ………………………………9918-893 …….. Corner Connector 1.5″, 3-Way ………………………………9918-902 …….. Corner Connector 30, 2-Way ………………………………..9918-903 …….. Corner Connector 30, 3-Way ………………………………..9918-911 …….. End Cap 28×28, Secure ……………………………………….6518-912 …….. End Cap 28X56, Secure……………………………………….6518-913 …….. End Cap 40×40, Secure ……………………………………….6518-914 …….. End Cap 40×80, Secure ……………………………………….6518-915 …….. End Cap 80×80, Secure w/ Stud ……………………………6518-916 …….. End Cap 40×40, Secure w/ Stud ……………………………6518-917 …….. End Cap 40×80, Secure w/ Stud ……………………………6518-918 …….. End Cap 80×80, Secure ……………………………………….6518-919 …….. End Cap 30×30, Secure ……………………………………….6518-920 …….. End Cap 30×60, Secure ……………………………………….6519-001 …….. Service, Saw Cut to 80x40mm …………………………….23119-002 …….. Service, Saw Cut to 80x80mm …………………………….23119-003 …….. Service, Saw Cut to 160x80mm …………………………..23119-004 …….. Drill and Counter Bore for BHCS or SHCS ……………23119-006 …….. Drill and Counter Bore for FHCS ………………………….23119-007 …….. Saw Cut For Linear Shafts ………………………………….23119-009 …….. Tap Profile End 5/16-18 ………………………………………23119-010 …….. Tap profile End M8 …………………………………………….23119-011 …….. Drill 7mm Access Hole ……………………………………….23119-012 …….. Drill & Tap for M5, M6, M8 or M10 ………………………..23119-013 …….. Drill & Tap for M3 or M4 ………………………………………23119-014 …….. Drill & Tap M12 or M16 (Knuckle Foot 80) ……………..23119-015 …….. Step Drill for Universal Fastener 40 or 28 ……………..23119-016 …….. Drill and Tap M8 (Knuckle Foot 40) ………………………23119-017 …….. Drill and Tap M10 (Knuckle foot 80)………………………23119-018 …….. Service for Quarter Turn Handles (22.5mm Dia) …….23119-019 …….. Service for Dowel (Securing Linear Shaft) …………….23119-020 …….. Drill 20mm x 6mm for Pneumatic Universal Fastener 23119-022 …….. Drill 0.375″ or 0.500″ Hole f or Ball Plunger ……………23119-023 …….. Drill through Hole f or Side Mounting Kn uckle F oot …23119-025 …….. Drill 7mm Access Hole through 160mm Side …………23119-026 …….. Panel Packaging for secure transport …………………..23119-027 …….. Drill thru panel up to 10mm for screws ………………….23119-029 …….. Chamfer Panel Corner ……………………………………….23119-030 …….. Notch Panel Corner ……………………………………………23119-031 …….. Special Service Cut ……………………………………………23119-032 …….. Panel cut to size ………………………………………………..23119-100 …….. Mill Square up to 80×40………………………………………23119-101 …….. Mill square up to 80×80 ………………………………………23119-102 …….. Mill Square up to 160×80…………………………………….23119-103 …….. Drill/Tap/Mill for Roller PA ……………………………………23119-104 …….. Special Miter Cut ……………………………………………….23119-105 …….. 45 Degrees Miter Cut up to 80×80 (3″x3″) …………….23119-106 …….. 45 Degrees Miter Cut, 6″x1.5″ …………………………….23119-140 …….. Drill hole 0.323″ for 40 & 80 profiles ……………………..23119-211 …….. Miter Connection Counter Bore ……………………………23120-002 …….. Standard Fastener 40, M8 …………………………………….7620-002SS …. Standard Fastener 40, M8 (SS)……………………………..7620-003 …….. Standard Fastener 30/28, M8 ………………………………..7620-003SS …. Standard Fastener 30/28, M8 (SS)…………………………7620-004 …….. Universal Fastener 40, M8 ……………………………………7820-004Z1 …. Universal Fastener 40 Zinc Casting ……………………….7820-005 …….. Universal Fastener 28, M6 ……………………………………7820-005Z1 …. Universal Fastener 28 Zinc Casting ……………………….7820-006 …….. Butt Fastener 40, M8 ……………………………………………7720-007 …….. Fastening Set for Bearing Unit 6 ………………………….21720-008 …….. Universal Fastener 30, M6 ……………………………………7820-011 …….. Pneumatic Fastener, Universal …………………………….17820-011 …….. Universal Fastener 28 to 40 M6 …………………………….7820-012 …….. Butt Fastener 30/28, M6 ……………………………………….7720-012 …….. Pneumatic Fastener, Butt-Fastening Set ……………….17820-015 …….. Profile to Wall Fastener 40, M8 ……………………………..8020-018-1 ….. Clamp Block 1, 40 Series, 1 Hole …………………………101 242 Industrial Profile SystemsIndexCatalog 1816-3/US 243Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA IndexPart # Description Page #Part # Description Page # Part Number20-018-2 ….. Clamp Block 2, 40 Series, 2 Hole …………………………10120-018-4 ….. Clamp Block 3, 40 Series, 4 Hole …………………………10120-019 …….. Self Tapping Connector 40 ……………………………………8020-021 …….. Standard Fastener 20, M5 …………………………………….7620-022 …….. Miter Connector 40, Variable …………………………………8120-028 …….. Flat Plate Fastener 40 ………………………………………….7720-028Z1 …. Flat Plate Only …………………………………………………….7720-030 …….. Fastening Set HD for Bearing Unit 14 …………………..21920-033 …….. Z-Nut 40, M3 ………………………………………………………8720-034 …….. Z-Nut 40, M4 ………………………………………………………8720-035 …….. Z-Nut 40, M5 ………………………………………………………8720-036 …….. Z-Nut 30/28, M3 ………………………………………………….8720-037 …….. Z-Nut 30/28, M4 ………………………………………………….8720-038 …….. Z-Nut 30/28, M5 ………………………………………………….8720-044 …….. Standard 20, M4 ………………………………………………….8320-045 …….. Standard 20, M5 ………………………………………………….8320-049 …….. Double Standard 30/40, M8, 24mm ……………………….8420-050 …….. Double Standard 30/40, M8, 40mm ……………………….8420-051 …….. Standard 30/40, M4 ……………………………………………..8320-052 …….. Standard 30/40, M5 ……………………………………………..8320-055 …….. Standard 28, M6 ………………………………………………….8320-056 …….. Standard 30/40, M6 ……………………………………………..8320-056SS …. Standard 30/40, M6 (SS)………………………………………8320-057 …….. Standard 28, M8 ………………………………………………….8320-058 …….. Standard 30/40, M8 ……………………………………………..8320-058SS …. Standard 30/40, M8 (SS)………………………………………8320-059 …….. T-Slot Bar 40/30 Standard …………………………………….8520-060 …….. Heavy Duty Single 40, M6 …………………………………….8520-0614 …… Heavy Duty Retainer Spring ………………………………….8520-062 …….. T-Slot Bar 40, Heavy Duty …………………………………….8520-063 …….. Heavy Duty Double 40, M8 …………………………………..8520-064 …….. Heavy Duty Single 40, M8 …………………………………….8520-065 …….. Self Aligning 28/30/40, M5 ……………………………………8420-066 …….. Self Aligning 28/30/40, M6 ……………………………………8420-067 …….. Heavy Duty Single 40, M5 …………………………………….8520-068 …….. Self Aligning 28/30/40, M8 ……………………………………8420-070 …….. Anodize Breaker ………………………………………………….8820-075 …….. Rack Angle Clip Nut M5 ……………………………………….9420-076 …….. Rack Angle Clip Nut M6 ……………………………………….9420-080 …….. Economy Standard 40, M6 ……………………………………8620-081 …….. Economy Standard 40, M8 ……………………………………8620-082 …….. Economy Standard 40, 5/16-18 ……………………………..8620-083 …….. Economy Standard 40, 1/4-20 ……………………………….8620-085 …….. Economy Standard 20, M5 ……………………………………8620-086 …….. Economy Standard 20, #10-24 ………………………………8620-088 …….. Economy Standard 1.5″, #10-32 ……………………………8620-090 …….. Economy Standard 30/28, M6 ……………………………….8620-090SS …. Economy Standard 30/28, M6 (SS) ………………………..8620-091 …….. Economy Standard 30/28, M8 ……………………………….8620-092 …….. Economy Standard 30/28, 5/16-18 …………………………8620-093 …….. Economy Standard 30/28, 1/4-20 …………………………..8620-101 …….. Gusset Bracket 30/28, 80×28 ………………………………10620-1010 …… Gusset 20 …………………………………………………………10720-102 …….. Gusset Bracket 40, 40×40 …………………………………..10620-103 …….. Gusset Bracket 40, 80×80 …………………………………..10620-104 …….. Joining Plate 28-40…………………………………………….10220-105 …….. Joining Plate 28, Corner ……………………………………..10320-106 …….. Joining Plate 28, T ……………………………………………..10320-108 …….. Joining Plate 1, 80 ……………………………………………..10220-109 …….. Joining Plate 40, Corner ……………………………………..10320-110 …….. Joining Plate 40, T ……………………………………………..10320-111 …….. Joining Plate 2, 40 ……………………………………………..10220-112 …….. Joining Plate 2, 80 ……………………………………………..10220-113 …….. Joining Plate 80, Corner ……………………………………..10320-114 …….. Joining Plate 80, T ……………………………………………..10320-116 …….. Connecting Angle 20, Double ………………………………10520-117 …….. Connecting Plate 20 …………………………………………..10220-118 …….. Connecting Plate 20, Double ……………………………….10220-127 …….. Miter Bracket ………………………………………………………8120-128 …….. Miter Connector 30/28 Fixed 90 Deg. ……………………..8120-128Z1 …. Miter Connector 30/28 Fixed Only ………………………….8120-129 …….. Fastening Set for Mounting Plate RU40 ………………..22520-132 …….. 18×32 Bi-Slot Fastener …………………………………………5420-143 …….. Standard Fastener 30/28, S End, M8x18 ………………..7620-144 …….. Standard Fastener 40, S End, M8 ………………………….7620-181 …….. Economy Offset 40, M8 ………………………………………..8620-182 …….. Economy Offset 40, 5/16-18 ………………………………….8620-190 …….. Economy Offset 30/28, M6 ……………………………………8620-193 …….. Economy Offset 30/28, 1/4-20 ……………………………….8620-200 …….. Wire Mesh Retainer 20……………………………………….11920-200P …… Panel Retainer 20 ………………………………………………11920-202 …….. Wire Mesh Retainer 40……………………………………….11920-202P …… Panel Retainer 40 ………………………………………………11920-2828M … Machined Gusset 28 ………………………………………….10920-2856M … Machined Gusset 28X56 …………………………………….10920-300 …….. Connecting Plate 1.5″ …………………………………………10220-301 …….. Joining Plate 1, 1.5″ …………………………………………..10220-302 …….. Joining Plate 2, 1.5″ …………………………………………..10220-303 …….. Joining Plate 2, 3.0″ …………………………………………..10220-304 …….. Joining Plate 1.5″, Corner …………………………………..10320-305 …….. Joining Plate 1.5″, T …………………………………………..10320-306 …….. Joining Plate 3.0″, T …………………………………………..10320-307 …….. Joining Plate 3.0″, Corner …………………………………..10320-310 …….. Connecting Plate 1.0″ …………………………………………10220-311 …….. Joining Plate 1, 1.0″ …………………………………………..10220-312 …….. Joining Plate 2, 1.0″ …………………………………………..10220-313 …….. Joining Plate 2, 2.0″ …………………………………………..10220-314 …….. Joining Plate 1.0″, Corner …………………………………..10320-315 …….. Joining Plate 1.0″, T …………………………………………..10320-4040 …… Gusset 40 …………………………………………………………10720-4040M … Machined Gusset 40 ………………………………………….10920-4080M … Machined Gusset 40X80 …………………………………….10920-440 …….. Gusset Bracket 1.5″ ……………………………………………10620-441 …….. Gusset Bracket 3.0″ ……………………………………………10620-442 …….. Gusset Bracket 1.0″ ……………………………………………10620-506 …….. Machined Gusset 1.0″ ………………………………………..10920-507 …….. Machined Gusset 1.0″X2.0″ ………………………………..10920-508 …….. Machined Gusset 1.5″ ………………………………………..10920-509 …….. Machined Gusset 1.5″X3.0″ ………………………………..10920-704 …….. Central Connector Perpendicural …………………………..7920-705 …….. Central Connector Parallel ……………………………………7920-8040 …… Gusset 40×80 ……………………………………………………10721-001 …….. Leveling Foot 40, M8X16 …………………………………….15621-001-30 … Leveling Foot 30, M8X9 ………………………………………15621-004 …….. Base Plate 28, M8, 54×25.4 ………………………………..17121-005 …….. Base Plate 28, M10, 54×25.4 ………………………………17121-006 …….. Base Plate 28, M12, 54×25.4 ………………………………17121-007 …….. Leveling Foot 20, M5X25 …………………………………….15621-008 …….. Knuckle Foot 40 M8x80 ………………………………………15921-009 …….. Knuckle Foot 40 M8x60 ………………………………………15921-010 …….. Knuckle Foot 30/28 M8……………………………………….15921-012 …….. Knuckle Foot 40 M10x80 …………………………………….15921-013 …….. Knuckle Foot 80, M12x100 ………………………………….16021-014 …….. Knuckle Foot 80, M12x160 ………………………………….16021-015 …….. Knuckle Foot HD, M20 Anti-Skid.. ………………………..15721-016 …….. Knuckle Foot 80, M16x100 ………………………………….16021-018 …….. Knuckle Foot 80, M16x160 ………………………………….16021-020 …….. Knuckle Foot 80 Rubber Insert …………………………….16121-021 …….. Knuckle Foot 80 Clamping Shoe ………………………….16121-022 …….. Leveling Foot L-Base 40 ……………………………………..162 244Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsIndexCatalog 1816-3/US 245 Part # Description Page #Part # Description Page # Part Number21-022-28 … Leveling Foot L-Base 28 ……………………………………..16221-022-30 … Leveling Foot L-Base 30 ……………………………………..16221-023 …….. Floor Anchor 40 …………………………………………………16221-023-28 … Floor Anchor 28 …………………………………………………16221-023-30 … Floor Anchor 30 …………………………………………………16221-029-10 … Base Plate 30, M10, 60×30 …………………………………17121-029-12 … Base Plate 30, M12, 60×30 …………………………………17121-029-8 ….. Base Plate 30, M8, 60×30 …………………………………..17121-031E …… Corner Mounting Plate Fastening Set (English) ……..16121-031M ….. Corner Mounting Plate Fastening Set (Metric) ……….16121-032 …….. Floor Fastening Set ……………………………………………16121-035 …….. Corner Element 1, 40 …………………………………………10821-036 …….. Corner Element 1, 80 …………………………………………10821-037 …….. Corner Element 2, 40 …………………………………………10821-038 …….. Corner Element 2, 80 …………………………………………10821-040ZX …. Pneumatic Connector Plate 40×80 ……………………….17621-041 …….. Pneumatic Seal 80×40 ……………………………………….17921-042 …….. Pneumatic Seal 80×80 ……………………………………….17921-043ZX …. Pneumatic Connector Plate 80×80 ……………………….17621-044 …….. Pneumatic Joining Plate, T, 80×80 ……………………….17721-045 …….. Pneumatic Joining Plate, Inline, 80×127 ……………….17721-046 …….. Pneumatic Seal 80×80 T-Joining ………………………….17921-060 …….. Floor Anchor 1.5″ ………………………………………………16221-061 …….. Floor Anchor 1.0″ ………………………………………………16221-065 …….. Roller Insert 25 ………………………………………………….12721-067 …….. Guide Insert Set, Metric ……………………………………….5521-068 …….. Roller Insert Set, Metric………………………………………..5521-069 …….. Roller 40 …………………………………………………………..12621-073 …….. Guide Insert Set, Inch ………………………………………….5521-075 …….. Roller Insert Set, Inch …………………………………………..5521-080 …….. Bifold Door Glide Set, 28S ………………………………….12121-081 …….. Bifold Door Glide Set, 40S ………………………………….12121-1020-04 . Base Plate 1.0″, 1/4-20, 1.0″x2.0″ ………………………..17221-1020-05 . Base Plate 1.0″, 5/16-18, 1.0″x2.0″ ………………………17221-135 …….. Corner Element 3, 40 …………………………………………10821-136 …….. Corner Element 3, 80 …………………………………………10821-144 …….. Pneumatic Seal 120×40 ……………………………………..17921-155 …….. Closure Plate 80×80 …………………………………………..12521-156 …….. Closure Plate 160×80 …………………………………………12521-2020-05 . Base Plate 1.0″, 5/16-18, 2.0″x2.0″ ………………………17221-2020-06 . Base Plate 1.0″, 3/8-16, 2.0″x2.0″ ………………………..17221-2020-08 . Base Plate 1.0″, 1/2-13, 2.0″x2.0″ ………………………..17221-204 …….. Base Plate 28, M8, 56×56 …………………………………..17121-205 …….. Base Plate 28, M10, 56×56 …………………………………17121-206 …….. Base Plate 28, M12, 56×56 …………………………………17121-220-10 … Base Plate 20, M10, 20×40 …………………………………17121-220-12 … Base Plate 20, M12, 20×40 …………………………………17121-220-8 ….. Base Plate 20, M8, 20×40 …………………………………..17121-224 …….. Knuckle Foot HD, M20 H eavy Duty …. …………………..15721-300 …….. Caster, Hollow King Pin 50mm No Lock ………………..16721-301 …….. Caster, Hollow King Pin 50mm Wheel Lock …………..16721-302 …….. Caster, Plate Type Rigid, 102kg, No Lock ……………..16921-303 …….. Caster, Plate Type Swivel, 102kg, No Lock ……………16921-304 …….. Caster, Plate Type Swivel, 102kg, Total Lock …………16921-310 …….. Caster, Hollow King Pin 75mm Total Lock ……………..16721-311 …….. Caster, Plate Type Rigid, 136kg, No Lock ……………..16921-312 …….. Caster, Plate Type Swivel, 136kg, No Lock ……………16921-313 …….. Caster, Plate Type Swivel, 136kg, Total Lock …………16921-314 …….. Caster, M10 Threaded 125mm No Lock ………………..16821-315 …….. Caster, M10 Threaded 125mm Total Lock ……………..16821-318 …….. Caster, Plate Type Swivel, 410kg, No Lock ……………16921-319 …….. Caster, Plate Type Swivel, 410kg, Total Lock …………16921-323 …….. Caster, M12 Threaded Leveler, 600kg/set ……………..16821-324 …….. Caster, Plate Type Leveler, 600kg/set …………………..16921-325 …….. Caster, Floor Lock ……………………………………………..16921-327 …….. Caster, M12 Threaded Leveler, 1200kg/set ……………16821-328 …….. Caster, Plate Type Leveler, 1200kg/set …………………16921-4000Z1 .. Blank Plate 40X80 ……………………………………………..17821-401 …….. Knuckle Foot 1.5″ 5/16-18 x 2.00″ ………………………..15921-402 …….. Knuckle Foot 1.5″ 5/16-18 x 2.50″ ………………………..15921-403 …….. Knuckle Foot 1.0″ 3/8-16 x 2.50″ ………………………….15921-404 …….. Knuckle Foot 1.5″ 1/2-13 x 3.15″ ………………………….16021-405 …….. Knuckle Foot 1.5″ 1/2-13 x 5.50″ ………………………….16021-406 …….. Knuckle Foot 1.5″ 5/8-11 x 3.15″ ………………………….16021-407 …….. Knuckle Foot 1.5″ 5/8-11 x 5.50″ ………………………….16021-410 …….. Knuckle Foot 1.0″ 1/4-20 x 1.44″ ………………………….15721-411 …….. Knuckle Foot 1.5″ 3/8-16 x 2.38″ ………………………….15721-412 …….. Knuckle Foot 1.0″ Steel 1/4-20 x 1.44″ ………………….15721-413 …….. Knuckle Foot 1.5″ Steel 3/8-16 x 2.38″ ………………….15721-414 …….. Knuckle Foot 1.5″ Steel 1/2-13 x 2.63″ ………………….15721-415 …….. Leveling Foot L-Base 1.5″ …………………………………..16221-416 …….. Leveling Foot L-Base 1.0″ …………………………………..16221-420 …….. Knuckle Foot 1/2-13 Bolt Down ……………………………15821-421 …….. Knuckle Foot 5/8-11 Bolt Down ……………………………15821-422 …….. Knuckle Foot Anti-Vibe 1/2-13 Light ……………………..15821-423 …….. Knuckle Foot Anti-Vibe 1/2-13 Medium …………………15821-424 …….. Knuckle Foot Anti-Vibe 1/2-13 Heavy ……………………15821-500 …….. Adapter Plate, Leveling Foot 21-324 5/16-18 …………17021-501 …….. Adapter Plate, Leveling Foot 21-324 1/4-20 …………..17021-502 …….. Adapter Plate, Leveling Foot 21-328 …………………….17021-504 …….. Adapter Plate, Leveling Foot ……………………………….17021-8000Z1 .. Blank Plate 80X80 ……………………………………………..17822-100 …….. Multiblock PA 40, M6 ………………………………………….11622-103 …….. Multiblock PA 30/28, M6 ……………………………………..11622-104 …….. Multiblock PA 20, M4 ………………………………………….11822-105 …….. Multiblock Aluminum, M5…………………………………….11722-106 …….. Multiblock Aluminum, M6…………………………………….11722-107 …….. Uniblock PA 20, M4 ……………………………………………11822-108 …….. Multiblock Aluminum, M8…………………………………….11722-110 …….. Wire Mesh Retainer Economy 40 (M6) …………………12022-111 …….. Wire Mesh Retainer Economy 40 (1/4-20) …………….12022-112 …….. Multiblock, Clamp Style 40 ………………………………….11722-113 …….. Multiblock, Clamp Style 30/28 ……………………………..11722-115 …….. Multiblock PA Universal, 1/4-20 ……………………………11622-116 …….. Multiblock PA 1.0″, 1/4-20 ……………………………………11822-117 …….. Multiblock 25 CS ……………………………………………….11822-121 …….. Drawer 6.75″ H ………………………………………………….18322-122 …….. Drawer 13.5″ H ………………………………………………….18322-126 …….. Parts Bin, Polypropylene …………………………………….18122-127 …….. Parts Bin, Polypropylene …………………………………….18122-128 …….. Parts Bin, Polypropylene …………………………………….18122-128Z2 …. Parts Bin Mounting Bracket, Flat ………………………….18122-128Z3 …. Parts Bin Mounting Bracket, Angled ……………………..18122-128Z4 …. Parts Bin Mounting Bracket, Double Angle ……………18122-129 …….. Parts Bin, Polypropylene …………………………………….18122-130 …….. Parts Bin Mounting Slide Rail ………………………………18222-134 …….. Parts Bin Slide Collar …………………………………………18222-136 …….. Tool Runner, Straight ………………………………………….18322-139 …….. Mounting Plate for 16X40 ……………………………………10122-140 …….. Connecting Element 40, Flat ……………………………….10222-145 …….. Connecting Element 28, Flat ……………………………….10222-146 …….. Corner Bracket 40 ……………………………………………….9822-150 …….. Corner Bracket 30 ……………………………………………….9822-151 …….. Connector Cap 30, Radius ……………………………………9822-152 …….. Connector Cap 30, Square……………………………………9822-153 …….. Corner Bracket 1.5″ ……………………………………………..9822-154 …….. Connector Cap 1.5″ ……………………………………………..9822-200 …….. Cable/Hose Holder, 40 …………………………………………9622-201 …….. Cable Tie Holder 30/28 …………………………………………9522-202 …….. Cable Tie Holder 40 ……………………………………………..95 244 Industrial Profile SystemsIndexCatalog 1816-3/US 245Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA IndexPart # Description Page #Part # Description Page # Part Number22-203 …….. Cable/Hose Holder, Qtr Turn Connection ………………..9622-206 …….. T-Clip 40, 6-8mm …………………………………………………9522-208 …….. T-Clip 40, 8-10mm ……………………………………………….9522-210 …….. T-Clip 40, 10-13mm ……………………………………………..9522-212 …….. T-Clip 40, 13-16mm ……………………………………………..9522-215 …….. T-Clip 40, 16-19mm ……………………………………………..9522-230 …….. Cable/Hose Holder, 1.5″ ……………………………………….9623-004 …….. Ball Catch, 3-Way ( Small) …………………………………..15223-010 …….. Pivot Joint 40 (Clear) ………………………………………….14523-010B …… Pivot Joint 40 (Black) ………………………………………….14523-011 …….. Hinge, 40 Steel Heavy Duty (Clear) ……………………..14423-011B …… Hinge, 40 Steel Heavy Duty (Black) ……………………..14423-012 …….. Ball Catch, 3-Way (Medium) ………………………………..15223-013 …….. Pivot Joint 30/28 (Clear) ……………………………………..14523-013B …… Pivot Joint 30/28 (Black) ……………………………………..14523-014 …….. Pivot Joint 40with Clamp Handle (Clear) ……………….14523-014B …… Pivot Joint 40 with Clamp Handle (Black)………………14523-015 …….. Pivot Joint 30/28 with Clamp Handle (Clear) ………….14523-015B …… Pivot Joint 30/28 with Clamp Handle (Black)………….14523-016 …….. Hinge, Multi-Series …………………………………………….14323-018 …….. Hinge, 28 Light Duty, Right Side…………………………..13523-019 …….. Hinge, 28 Light Duty, Left Side …………………………….13523-020 …….. Hinge, 20 Light Duty …………………………………………..13423-021 …….. Hinge, 40 Light Duty, Right Side…………………………..13623-023 …….. Hinge, 40 Light Duty, Left Side …………………………….13623-024 …….. Hinge, 30 Medium Duty ……………………………………..14023-025 …….. Hinge, 40 Medium Duty ……………………………………..14023-025L …… Hinge, 40 Medium Duty (Locking) ………………………..14023-028 …….. Handle, Multipurpose Plastic, 170mm …………………..13223-030 …….. Handle, Light Duty Aluminum ………………………………13023-033 …….. Handle, Multipurpose Plastic, 112mm …………………..13223-034 …….. Handle, Light Duty Aluminum, Angled …………………..13023-038 …….. Handle, Qtr Turn 40, L Handle, Locking ………………..14623-038Z1 …. Qtr Turn Backing Plate………………………………………..14823-039 …….. Handle, Qtr Turn 40, L Handle, Non-Locking ………….14623-040 …….. Handle, Qtr Turn 28, L Handle, Locking ………………..14623-041 …….. Handle, Qtr Turn 28, L Handle, Non-Locking ………….14623-043 …….. Ball Catch 40 (M8)……………………………………………..15123-045 …….. Magnetic Catch 20/1.0″ ………………………………………15023-046 …….. Magnetic Catch 28/30/40/1.5″ ……………………………..15023-051 …….. Magnetic Catch Strike Plate ………………………………..15023-054 …….. Sliding Door Guides …………………………………………..12423-055 …….. Door Guide ……………………………………………………….12523-065 …….. Sliding Door Set ………………………………………………..12323-072 …….. Handle, Tube Style Ends …………………………………….13323-073 …….. Handle, Tube Style Center Support ………………………13323-074 …….. Handle, Large Angled …………………………………………13123-075 …….. Handle, Medium Open Angled …………………………….13123-076 …….. Handle, Medium Open Caps ……………………………….13123-121 …….. Ball Catch 40 (1/4-20) ………………………………………..15123-124 …….. Door Stop, Straight …………………………………………….15323-125 …….. Door Stop 30/40, Angled …………………………………….15323-128 …….. Ball Plunger 28, 3/8″ x 18mm ………………………………15223-129 …….. Ball Plunger 40/40, 1/2″ x 28mm ………………………….15223-133 …….. Handle, Qtr Turn 40, T Handle, Non-Locking ………….14623-134 …….. Handle, Qtr Turn 40, Wing Knob, Locking ……………..14623-135 …….. Handle, Qtr Turn 40, Square Insert ………………………14623-140Z1 …. Qtr Turn Spare Key …………………………………………….14823-140Z2 …. Qtr Turn Spare Key …………………………………………….14823-140Z3 …. Qtr Turn Cam, Offset 8 ……………………………………….14823-140Z4 …. Qtr Turn Cam, Offset 16 ……………………………………..14823-140Z5 …. Qtr Turn Cam, Offset 10 ……………………………………..14823-140Z6 …. Qtr Turn Cam, Offset -2 ………………………………………14823-140Z7 …. Qtr Turn Keeper Bracket ……………………………………..14823-142Z1 …. Qtr Turn Cam, Hooked………………………………………..14823-143 …….. Handle, Qtr Turn Pnl Mount, T-Handle, Non-Locking .14723-144 …….. Handle, Qtr Turn Pnl Mount, Wing Knob, Locking …..14723-145 …….. Handle, Qtr Turn Pnl Mount, Square Insert, Locking .14723-155 …….. Slam Latch – Locking ………………………………………….14923-156 …….. Slam Latch – Non-Locking …………………………………..14923-158 …….. Velcro Plate ………………………………………………………15323-159 …….. Handle, Qtr Turn Inside Mount……………………………..14723-160 …….. Deadbolt Latch ………………………………………………….14923-200 …….. Rail Cart, 8 Roller ………………………………………………12823-201 …….. Rail Cart, 4 Roller ………………………………………………12823-202 …….. Rail Cart, 4 Roller w/ Fastening Set ……………………..12823-220 …….. Hinge, Adjustable 28 ………………………………………….14123-222 …….. Hinge, Adjustable 40 ………………………………………….14123-225 …….. Concealed Hinge 40 …………………………………………..14223-225Z1 …. Concealed Hinge, Half Hinge ………………………………14223-225Z2 …. Concealed Hinge, Hinge Pin ……………………………….14223-226 …….. Hinge, Positioning, 120 Degrees ………………………….14223-233 …….. Handle, 20 ………………………………………………………..13223-242 …….. Hinge, 30/28 Medium Duty ………………………………….13423-250 …….. Hinge, Medium Duty Steel Non-Removable 28-28 ….13923-250L …… Hinge, Medium Duty Steel Lift Off Left 28-28 …………13923-250R …… Hinge, Medium Duty Steel Lift Off Right 28-28 ………13923-251 …….. Hinge, Medium Duty Steel Non-Removable 28-40 ….13923-251L …… Hinge, Medium Duty Steel Lift Off Left 28-40 …………13923-251R …… Hinge, Medium Duty Steel Lift Off Right 28-40 ………13923-252 …….. Hinge, Medium Duty Steel Non-Removable 40-40 ….13923-252L …… Hinge, Medium Duty Steel Lift Off Left 40-40 …………13923-252R …… Hinge, Medium Duty Steel Lift Off Right 40-40 ………13923-260 …….. Pivot Joint 1.0″…………………………………………………..14523-261 …….. Pivot Joint 1.0″ with Clamp Handle ………………………14523-262 …….. Pivot Joint 1.5″…………………………………………………..14523-263 …….. Pivot Joint 1.5″ with Clamp Handle ………………………14523-316 …….. Ratchet Lever M8x16 …………………………………………20123-320 …….. Ratchet Lever M8x20 …………………………………………20123-325 …….. Ratchet Lever M8x25 …………………………………………20123-340 …….. Ratchet Lever M8x40 …………………………………………20123-350 …….. Ratchet Lever M8x50 …………………………………………20123-363 …….. Ratchet Lever M8x63 …………………………………………20123-440L …… Hinge, 40 Lift Off Left …………………………………………14423-440R …… Hinge, 40 Lift Off Right ……………………………………….14423-535 …….. Hinge, Med. Duty Plastic Non-Removable 28/30-40 .13723-535L …… Hinge, Medium Duty Plastic Lift Off Left 28/30-40 ….13723-535R …… Hinge, Medium Duty Plastic Lift Off Right 28/30-40 ..13723-545 …….. Hinge, Medium Duty Plastic Non-Removable 40-40 .13723-545L …… Hinge, Medium Duty Plastic Lift Off Left 40-40 ………13723-545R …… Hinge, Medium Duty Plastic Lift Off Right 40-40 …….13723-550 …….. Hinge, Medium Duty Plastic Non-Removable 1.0″ ….13723-550L …… Hinge, Medium Duty Plastic Lift Off Left 1.0″ …………13723-550R …… Hinge, Medium Duty Plastic Lift Off Right 1.0″ ……….13723-551 …….. Hinge, Medium Duty Plastic Non-Removable 1.5″ ….13823-551L …… Hinge, Medium Duty Plastic Lift Off Left 1.5″ …………13823-551R …… Hinge, Medium Duty Plastic Lift Off Right 1.5″ ……….13823-552 …….. Hinge, Med. Duty Plastic Non-Removable 1.5″ to1″ ..13824-1XX-X …. Screws, Button Head (Metric) ……………………………….9024-210-4 ….. End Cap (Secure w/ Stud) Screw …………………………..6524-2XX-X …. Screws, Flat Head (Metric) ……………………………………9024-3XX-X …. Screws, Socket Head (Metric) ……………………………….9024-4XX-X …. Screws, T-Bolt (Metric) …………………………………………8824-5XX-XX .. Screws, Set Screws w/ Hexagon Socket (Metric) ……..9424-695 …….. Conduit Locking Screw 4.2×9.5 ……………………………..7224-719-6 ….. Economy Compression Spring, M6 ………………………..8624-719-8 ….. Economy Compression Spring, M8 ………………………..8624-7XX-X …. Metric Nuts …………………………………………………………8924-7XX-X …. Washers …………………………………………………………….8925-001 …….. Standard, 30/40, 1/4-20………………………………………..83 246Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsIndexCatalog 1816-3/US 247 Part # Description Page #Part # Description Page # 25-002 …….. Standard, 30/40, 5/16-18………………………………………8325-003 …….. Standard Fastener 1.5″, 5/16-18 ……………………………7625-003SS …. Standard Fastener 1.5″, 5/16-18 (SS) …………………….7625-004 …….. Universal Fastener 1.5″, 5/16-18 ……………………………7825-009 …….. Standard, 30/40, #10-32……………………………………….8325-014 …….. Standard Fastener 1.5″, S End, 5/16-18 …………………7625-016 …….. Butt Fastener 1.5″, 5/16-18 …………………………………..7725-017 …….. Butt Fastener 1.0″, 1/4-20 …………………………………….7725-022 …….. Standard Fastener 1″, 1/4-20 ………………………………..7625-023 …….. Universal Fastener 1.0″, 1/4-20 ……………………………..7825-024 …….. Miter Connector 1.5″, Variable ……………………………….8125-026 …….. Miter Connector 1.0″, Fixed …………………………………..8125-027 …….. Cross Connector 1.5″, Double Tab ……………………….10025-028 …….. Flat Plate Fastener 1.5″ ………………………………………..7725-030 …….. Standard, 1.0″, #10-32 …………………………………………8325-031 …….. Standard, 1.0″, 1/4-20 ………………………………………….8325-041 …….. Double Standard 1.5″, 5/16-18, 1.5″ ……………………….8425-045 …….. Economy Offset 1.5″, #8-32 ………………………………….8625-046 …….. Double Economy 1.5″, 5/16-18, 0.5″ ………………………8725-047 …….. Double Economy 1.5″, 5/16-18, 0.88″ …………………….8725-048 …….. Double Economy 1.5″, 5/16-18, 1.0″ ………………………8725-050 …….. Heavy Duty Single 1.5″, 1/4-20 ……………………………..8525-051 …….. Heavy Duty Single 1.5″, 5/16-18 ……………………………8525-052 …….. Heavy Duty Double 1.5″, 1/4-20, 1.0″ ……………………..8525-053 …….. Heavy Duty Double 1.5″, 5/16-18, 1.5″ ……………………8525-055 …….. Standard 28, 1/4-20……………………………………………..8325-057 …….. Standard 28, 5/16-18……………………………………………8325-075 …….. Rack Angle Clip Nut #10-32 ………………………………….9425-076 …….. Rack Angle Clip Nut 1/4-20 …………………………………..9425-080 …….. Bi-fold Door Guide, 40 to 40 ………………………………..12125-082 …….. Bi-fold Door Guide, 30/28 to 30/28 ……………………….12125-1XX-X …. Screws, Button Head (English) ……………………………..9225-2XX-X …. Screws, Flat Head (English) ………………………………….9225-3XX-X …. Screws, Socket Head (English) ……………………………..9225-5XX-XX .. Screws, Set Screws w/ Hexagon Socket (English) ……9425-705-2 ….. High Cycle Nut #10-32 …………………………………………9425-7XX-XX .. Inch Nuts ……………………………………………………………8925-7XX-XX .. Washers …………………………………………………………….8926-110-6 ….. Panel, Aluminum Veneer, 6mm, Black …………………..11426-170-6 ….. Panel, Aluminum Veneer, 6mm, Clear …………………..11426-180-6 ….. Panel, Aluminum Veneer, 6mm, White ………………….11426-210-05 … Panel, Wire Mesh .5″x.5″ Black ……………………………11326-210-10 … Panel, Wire Mesh 1″x1″ Black ……………………………..11326-210-15 … Panel, Wire Mesh 1.5″x1.5″ Black ………………………..11326-210-20 … Panel, Wire Mesh 2″x2″ Black ……………………………..11326-250-10 … Panel, Wire Mesh 1″x1″ Yellow …………………………….11326-410-6 ….. Panel, 6mm TRESPA – Black ……………………………….11326-410-8 ….. Panel, 8mm TRESPA – Black ……………………………….11326-420-6 ….. Panel, 6mm TRESPA – Grey ………………………………..11326-430-10 … Panel, 10mm TRESPA – Blue………………………. ………11326-430-6 ….. Panel, 6mm TRESPA – Blue ………………………………..11326-480-6 ….. Panel, 6mm TRESPA – White ………………………………11326-510-6 ….. Panel, Expanded PVC, 6mm, Black ……………………..11426-530-6 ….. Panel, Expanded PVC, 6mm, Blue ……………………….11426-580-6 ….. Panel, Expanded PVC, 6mm, White ……………………..11426-790-3 ….. Panel, Polycarbonate 3mm, Clear ………………………..11326-790-6 ….. Panel, Polycarbonate, Clear ………………………………..11326-795-6 ….. Panel, Polycarbonate, Light Smoked …………………….11327-002-XX .. SMART Base Plate 40×80/1.5″x3.0″ …………………….17227-003-XX .. SMART Base Plate 80×80/3.0″x3.0″ …………………….17227-030 …….. Corner Mounting Plate ……………………………………….16127-050 …….. Flange Foot 40/1.5″ ……………………………………………16527-055 …….. Flange Foot 40X80/1.5″X3″ …………………………………16527-056 …….. Flange Foot 80/3″ ………………………………………………16527-057 …….. Floor Mounting Bracket 40/1.5″ ……………………………16327-058 …….. Floor Mounting Bracket 80/3.0″ ……………………………16327-059 …….. Floor Mounting Bracket 28/30/1.0″ ……………………….16327-060 …….. Floor Mounting Bracket 56/60/2.0″ ……………………….16327-146 …….. Catch Bracket Universal ……………………………………..15027-202 …….. Cross Cable Tie Holder 40/1.5″ ……………………………..9527-203 …….. Cross Cable Tie Holder 1.0″ ………………………………….9527-600 …….. Angle Connector 40/1.5″, 45 Degrees …………………..10028-004 …….. Milling Connector 40/1.5″ ……………………………………..7928-005 …….. Milling Connector 30…………………………………………….7928-501 …….. Economy Floor Mounting Bracket 20 ……………………16428-502 …….. Economy Floor Mounting Bracket 1″ …………………….16428-503 …….. Economy Floor Mounting Bracket 30 ……………………16428-504 …….. Economy Floor Mounting Bracket 1.5″ ………………….16428-505 …….. Economy Floor Mounting Bracket 40 ……………………16428-506 …….. Economy Floor Mounting Bracket 20X20 ………………16428-507 …….. Economy Floor Mounting Bracket 2″ …………………….16428-508 …….. Economy Floor Mounting Bracket 60 ……………………16428-509 …….. Economy Floor Mounting Bracket 3.0″ ………………….16428-510 …….. Economy Floor Mounting Bracket 80 ……………………16428-600 …….. Economy Gusset 20/1″ ……………………………………….10428-601 …….. Economy Gusset 28/30 ………………………………………10428-602 …….. Economy Gusset 40/1.5″ …………………………………….10428-603 …….. Economy Gusset 28×56/30×60/1″x2″ ……………………10528-604 …….. Economy Gusset 80/3″ ……………………………………….10528-605 …….. Economy Gusset 56/60 ………………………………………10428-606 …….. Economy Gusset 80/3″ ……………………………………….10428-607 …….. Economy Gusset 56×56/60×60 ……………………………10528-608 …….. Economy Gusset 80×80/3″x3″ ……………………………..10530-0001 …… Slide Block 28 Ratcheting L-Handle ……………………..20130-0005 …… Slide Block 28 Star Handle ………………………………….20130-0011 …… Slide Block 40 Ratcheting L-Handle ……………………..20130-0015 …… Slide Block 40 Star Handle ………………………………….20130-006 …….. Roller System Components, Bolt, 6-Centric …………..22330-007 …….. Roller System Components, Bolt, 6-Eccentric ……….22330-008 …….. Roller System Comp., Track Roller, Track Dia. 6……..22330-1000 …… Slide Pad 1.0″x2.0″, Tapped ………………………………..20030-1001 …… Slide Pad 1.0″x2.0″ Top, Tapped …………………………..20030-1002 …… Slide Block 1.0″ Double Flange, 2.00″ …………………..19230-1004 …… Slide Block 1.0″ Double Flange, 4.00″ …………………..19230-101 …….. Roller System 14, Single Bearing Unit Centric ……….22230-1012 …… Slide Block 1.0″ Side Flange, 2.00″ ………………………19430-1014 …… Slide Block 1.0″ Side Flange, 4.00″ ………………………19430-102 …….. Roller System 14, Double Bearing Unit Centric ……..22230-1024 …… Slide Block 1.0″ Side Flange Extended, 4.00″ ………..19530-103 …….. Roller System 14, Single Bearing Unit Eccentric ……22230-104 …….. Roller System 14, Double Bearing Unit Eccentric …..22230-105 …….. Roller System Components, Bolt, 14-Centric …………22330-106 …….. Roller System Components, Bolt, 14-Eccentric ……..22330-107 …….. Roller System 14, End Cap/Lubricating System …….23030-107Z1 …. Roller System 14, Replacement Felt …………………….23030-108 …….. Roller System Comp., Track Roller, Track Dia. 14……22330-108Z1 …. Roller System Components, Spacer Shim, LR14 …..22330-111 …….. Roller System 14 HD, Single Bearing Unit Centric ….22230-113 …….. Roller System 14 HD, Single Bearing Unit Eccentric 22230-114Z3 …. Roller System Comp., Spacer Shim, LR14HD ……….22330-114Z5 …. Roller System 14 HD, Replacement Felt ……………….23030-1500 …… Slide Pad 1.5″x3.0″, Tapped ………………………………..20030-1501 …… Slide Pad 1.5″x3.0″, High Cycle …………………………..20030-1503 …… Slide Block 1.5″ Double Flange, 3.00″ …………………..19630-1503HC . Slide Block 1.5″ High Cycle Single ……………………….19630-1506 …… Slide Block 1.5″ Double Flange, 6.00″ …………………..19630-1506HC . Slide Block 1.5″ High Cycle Double ………………………19630-1513 …… Slide Block 1.5″ Side Flange, 3.00″ ………………………19830-1513HC . Slide Block 1.5″ High Cycle Flush, Single ……………..19830-1516 …… Slide Block 1.5″ Side Flange Extended, 4.50″ ………..199Part Number 246 Industrial Profile SystemsIndexCatalog 1816-3/US 247Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Index Part Number30-1516HC . Slide Block 1.5″ High Cycle Extended, Single ………..19930-1523 …… Slide Block 1.5″ Side Flange, 6.00″ ………………………19830-1523HC . Slide Block 1.5″ High Cycle Flush, Single ……………..19830-2000 …… Slide Pad 1.0″x2.0″ Top, Tapped …………………………..20030-2002 …… Slide Block 2.0″ Double Flange, 2.00″ …………………..19330-2004 …… Slide Block 2.0″ Double Flange, 4.00″ …………………..19330-207 …….. Roller System 25, End Cap/Lubricating System …….23030-207Z1 …. Roller System 25, Replacement Felt …………………….23030-2800-2 … Slide Pad 28, 80mm …………………………………………..20030-2801 …… Slide Block 28 Double Flange, 50mm …………………..19230-2808 …… Slide Block 28 Double Flange, 100mm …………………19230-2821 …… Slide Block 28 Side Flange, 50mm ………………………19430-2822 …… Slide Block 28 Side Flange Extended, 90mm ………..19530-2828 …… Slide Block 28 Side Flange, 100mm …………………….19430-2829 …… Slide Block 28 Side Flange Extended, 140mm ………19530-3000 …… Slide Pad 1.5″x3.0″, Tapped ………………………………..20030-3001 …… Slide Pad 1.5″x3.0″, High Cycle …………………………..20030-3003 …… Slide Block 3.0″ Double Flange, 3.00″ …………………..19730-3003HC . Slide Block 3.0″ High Cycle Single ……………………….19730-3006 …… Slide Block 3.0″ Double Flange, 6.00″ …………………..19730-3006HC . Slide Block 3.0″ High Cycle Double ………………………19730-4000-2 … Slide Pad 40, 80mm …………………………………………..20030-4000-3 … Slide Pad 40, 300mm …………………………………………20030-4000-6 … Slide Pad 40, 80mm High-Cycle ………………………….20030-4001 …… Slide Block 40 Double Flange, 80mm …………………..19630-4001HC . Slide Block 40 High Cycle Single …………………………19630-4008 …… Slide Block 40 Double Flange, 160mm …………………19630-4008HC . Slide Block 40 High Cycle Double ………………………..19630-401 …….. Roller System 6, Single Bearing Unit Centric …………22230-402 …….. Roller System 6, Double Bearing Unit Centric ……….22230-4021 …… Slide Block 40 Side Flange, 80mm ………………………19830-4021HC . Slide Block 40 High Cycle Flush, Single ……………….19830-4022 …… Slide Block 40 Side Flange Extended, 120mm ………19930-4022HC . Slide Block 40 High Cycle Extended, Single ………….19930-4028 …… Slide Block 40 Side Flange, 160mm …………………….19830-4028HC . Slide Block 40 High Cycle Flush, Double ………………19830-4029 …… Slide Block 40 Side Flange Extended, 200mm ………19930-4029HC . Slide Block 40 High Cycle Extended, Double …………19930-403 …….. Roller System 6, Single Bearing Unit Eccentric ……..22230-404 …….. Roller System 6, Double Bearing Unit Eccentric …….22230-407 …….. Roller System 6, End Cap/Lubricating System ………23030-407Z5 …. Roller System 6, Replacement Felt ………………………23030-412Z2 …. Shim Pack 80 ……………………………………………………20030-503Z6 …. Roller System 14 HD, End Cap/Lubricating System .23030-5601 …… Slide Block 56 Double Flange, 50mm …………………..19330-5608 …… Slide Block 56 Double Flange, 100mm …………………19330-8001 …… Slide Block 80 Double Flange, 80mm …………………..19730-8001HC . Slide Block 80 High Cycle Single …………………………19730-8008 …… Slide Block 80 Double Flange, 160mm …………………19730-8008HC . Slide Block 80 High Cycle Double ………………………..19730-812Z2 …. Shim Pack 160 ………………………………………………….200 31-001 …….. Roller System Adapter Shaft, A……………………………21331-002 …….. Roller System Adapter Shaft, B……………………………21331-003 …….. Roller System Adapter Shaft, C …………………………..21331-004 …….. Roller System Adapter Shaft, D …………………………..21331-005 …….. Roller System Adapter Shaft, E……………………………21331-006 …….. Roller System Adapter Shaft, F ……………………………21331-010 …….. Roller System Adapter Shaft, Blank ……………………..21331-014 …….. Roller System Universal Adapter Flange ………………21331-014AD … Roller System Adapter Flange, A&D …………………….21331-014B …… Roller System Adapter Flange, B …………………………21331-014C …… Roller System Adapter Flange, C …………………………21331-014E …… Roller System Adapter Flange, E …………………………21331-014F …… Roller System Adapter Flange, F …………………………21331-014G …… Roller System Adapter Flange, G …………………………21331-030 …….. Roller System Belt 25T10 Clamping Block …………….22631-031 …….. Roller System Tensioning Block …………………………..22631-033 …….. Roller System Exciter Cam …………………………………22831-035 …….. Roller System Proximity Switch ……………………………22831-036 …….. Roller System Proximity Switch Mounting Element …22831-037 …….. Roller System Limit Stop – Single Direction ……………22731-037Z3A .. Rubber Shock Absorber ……………………………………..22731-038 …….. Roller System Limit Stop – Bi-Directional ………………22731-052-1 ….. Roller System Hi-Flex Timing Belt ………………………..22631-122 …….. Roller System Reversing Unit 40, Spline Pulley ……..22531-123 …….. Pulley, Spline Reversing Unit 40 …………………………..22531-124 …….. Roller System Reversing Unit 40, 8mm Bore …………22531-125 …….. Pulley, 8mm Bore Reversing Unit 40 …………………….22531-126 …….. Roller System Reversing Unit 40, Idler………………….22531-127 …….. Pulley, Idler Reversing Unit 40 ……………………………..22531-129 …….. Roller System Reversing Unit 40 Mounting Plate ……22531-808 …….. LR Bumper ……………………………………………………….22740-010 …….. Drilling Jig 40, Standard Connection …………………….23740-011 …….. Drilling Jig 80, Standard Connection …………………….23740-012 …….. Wrench with T-Handle, Hex 5 ………………………………23940-013 …….. Wrench, Ball Headed Hex 5 ………………………………..23940-015 …….. Drilling Jig 40, Universal Connection …………………….23740-016 …….. Tap M8x1.25 ……………………………………………………..23940-017 …….. Spanner Wrench, Adjustable for LR14 ………………….24040-018 …….. Drill Bit 6.8mm …………………………………………………..23940-022 …….. Wrench, Ball Headed Hex 6 ………………………………..23940-023 …….. Step Drill 7×20, #2 Morse Taper …………………………..23840-024 …….. Step Drill 7×20 with 3 Flats ………………………………….23840-025 …….. Step Drill 9×15 …………………………………………………..23840-026 …….. Drilling Jig, Clamp Profile 40×40 ………………………….23840-027 …….. Drilling Jig 28, Standard Connection …………………….23740-029 …….. Spanner Wrench, Pin Socket for LR14 ………………….24040-030 …….. Drilling Jig 30, Standard Connection …………………….23740-032-14 … Spanner Wrench, Fixed, LR14 …………………………….24040-032-25 … Spanner Wrench, Fixed, LR25 …………………………….24040-044 …….. Wrench with T-Handle, 3/16″ ……………………………….23940-046 …….. Wrench with T-Handle, 1/4″ …………………………………23940-047 …….. Wrench, Ball Headed 3/16″ …………………………………23940-048 …….. Wrench, Ball Headed 1/4″ …………………………………..23940-516 …….. Tap 5/16-18 ………………………………………………………23950-700 …….. Workstation Lift System, 4 Cylinder ……………………..18550-702 …….. Workstation Lift System, 2 Cylinder ……………………..18450-703 …….. Workstation Lift System, Telescopic Guide ……………18450-704 …….. Workstation Lift System Mounting Plate 50-703 …….18450-705 …….. Workstation Lift System Mounting Plate for 50-700 ..185800.17 ……… Shoulder Bolt M5x6x25 ………………………………………126Part # Description Page #Part # Description Page # 248Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsIndexCatalog 1816-3/US 249 Description Part # Page #Description Part # Page # Topic1″ Series Profile 1.0″X1.0″ ………………………………………………………12-1010 …………..52 1.0″X2.0″ ………………………………………………………12-1020 …………..52 2.0″X2.0″ ………………………………………………………12-2020 …………..521.5″ Series Profile 1.5″X1.5″ ………………………………………………………10-1515 …………..45 1.5″X1.5″ Bi-Slot Corner …………………………………10-1592 …………..46 1.5″X1.5″ Bi-Slot Mid-Frame ……………………………10-1594 …………..46 1.5″X1.5″ Heavy …………………………………………….11-1515 …………..45 1.5″X1.5″ Light ………………………………………………12-1515 …………..45 1.5″X1.5″ Mono-Slot ……………………………………….10-1591 …………..46 1.5″X1.5″ Quarter Round ………………………………..10-1543 …………..47 1.5″X1.5″ Tri-Slot ……………………………………………10-1593 …………..46 1.5″X3.0″ ………………………………………………………10-1530 …………..48 1.5″X3.0″ Heavy …………………………………………….11-1530 …………..48 1.5″X3.0″ Light ………………………………………………12-1530 …………..48 1.5″X6.0″ ………………………………………………………10-1560 …………..50 3.0″X3.0″ ………………………………………………………10-3030 …………..49 3.0″X3.0″ Heavy …………………………………………….11-3030 …………..4920 Series Profile 20X10 …………………………………………………………..12-120 …………….42 20X20 ………………………………………………………….12-020 …………….42 20X40 ………………………………………………………….12-124 …………….42 40X40 20 Series ……………………………………………12-040 …………….4328 Series Profile 28X28 45 Degrees …………………………………………12-044 …………….39 28X28 Bi-Slot ………………………………………………..12-228 …………….38 28X28 Bi-Slot Mid-Frame ………………………………..12-328 …………….38 28X28 Quad-Slot …………………………………………..12-028 …………….37 28X28 Quad-Slot (Black) ………………………………..12-028B …………..37 28X28 Tri-Slot ………………………………………………..12-128 …………….38 28X56 Bi-Slot ………………………………………………..12-628 …………….40 28X56 Open Slot ……………………………………………12-428 …………….37 28X56 Quad-Slot …………………………………………..12-728 …………….40 56X56 …………………………………………………………..12-056 …………….3730 Series Profile 30X30 …………………………………………………………..12-030 …………….33 30X30 Bi-Slot Corner ……………………………………..12-034 …………….33 30X30 Quarter Round …………………………………….12-033 …………….34 30X60 …………………………………………………………..12-060 …………….3540 Series Profile 120×40 Standard ……………………………………………10-120 …………….28 160×40 Heavy ……………………………………………….11-140 …………….28 160×40 Standard ……………………………………………10-164 …………….28 160×80 Heavy ……………………………………………….11-160 …………….29 160×80 Standard ……………………………………………10-160 …………….29 16X160 …………………………………………………………10-161 …………….24 16X40 …………………………………………………………..10-016 …………….24 16X80 …………………………………………………………..10-081 …………….24 28X160 …………………………………………………………11-128 …………….25 40X100 Heavy……………………………………………….11-100 …………….25 40X40 Bi-Slot Corner ……………………………………..10-140 …………….20 40X40 Bi-Slot Mid-Frame ………………………………..10-240 …………….20 40X40 Heavy…………………………………………………11-040 …………….19 40X40 Heavy Square ……………………………………..11-540 …………….31 40X40 Light …………………………………………………..10-540 …………….19 40X40 Light (Black) ………………………………………..10-540B …………..19 40X40 Mono-Slot …………………………………………..10-440 …………….20 40X40 Quarter Round ST ……………………………….10-043 …………….21 40X40 Standard …………………………………………….10-040 …………….19 40X40 Standard (Black) ………………………………….10-040B …………..19 40X40 Tri-Slot ………………………………………………..10-340 …………….20 40×40-45 Degrees Standard ……………………………10-044 …………….22 40X45 Degrees Standard ………………………………..10-045 …………….22 40X80 Quad-Slot …………………………………………..10-380 …………….26 80×120 Heavy ……………………………………………….11-122 …………….27 80X40 Heavy…………………………………………………11-080 …………….26 80X40 Light …………………………………………………..10-680 …………….26 80X40 Standard …………………………………………….10-080 …………….26 80X40 Standard (Black) ………………………………….10-080B …………..26 80X40 Tri-Slot Corner……………………………………..10-180 …………….26 80X80 Extra Heavy ………………………………………..11-089 …………….27 80X80 Heavy…………………………………………………11-088 …………….27 80X80 Standard …………………………………………….10-088 …………….27 80X80 Standard (Black) ………………………………….10-088B …………..27 80X80X40 Corner Heavy ………………………………..11-084 …………….30 Post 36X36 ……………………………………………………10-036 …………….31 Post 56X56 …………………………………………………..11-056 …………….31 Profile Rail 40X80, Clear …………………………………14-248 …………..128 R40X80 30 Degrees Standard …………………………10-083 …………….23 R40X80 45 Degrees Standard …………………………10-085 …………….23 R40X80 60 Degrees Standard …………………………10-086 …………….23 R40X80 90 Degrees Standard …………………………10-089 …………….23Anodize Breaker Anodize Breaker …………………………………………….20-070 …………….88Base Plate Adapter Plate, Leveling Foot ……………………………21-504 …………..170 Adapter Plate, Leveling Foot 21-324 1/4-20 ……….21-501 …………..170 Adapter Plate, Leveling Foot 21-324 5/16-18 ……..21-500 …………..170 Adapter Plate, Leveling Foot 21-328 …………………21-502 …………..170 Base Plate 1.0″, 1/2-13, 2.0″x2.0″ …………………….21-2020-08 …….172 Base Plate 1.0″, 1/4-20, 1.0″x2.0″ …………………….21-1020-04 …….172 Base Plate 1.0″, 3/8-16, 2.0″x2.0″ …………………….21-2020-06 …….172 Base Plate 1.0″, 5/16-18, 1.0″x2.0″ …………………..21-1020-05 …….172 Base Plate 1.0″, 5/16-18, 2.0″x2.0″ …………………..21-2020-05 …….172 Base Plate 20, M10, 20×40 ……………………………..21-220-10 ………171 Base Plate 20, M12, 20×40 ……………………………..21-220-12 ………171 Base Plate 20, M8, 20×40 ……………………………….21-220-8 ………..171 Base Plate 28, M10, 54×25.4 …………………………..21-005 …………..171 Base Plate 28, M10, 56×56 ……………………………..21-205 …………..171 Base Plate 28, M12, 54×25.4 …………………………..21-006 …………..171 Base Plate 28, M12, 56×56 ……………………………..21-206 …………..171 Base Plate 28, M8, 54×25.4 …………………………….21-004 …………..171 Base Plate 28, M8, 56×56 ……………………………….21-204 …………..171 Base Plate 30, M10, 60×30 ……………………………..21-029-10 ………171 Base Plate 30, M12, 60×30 ……………………………..21-029-12 ………171 Base Plate 30, M8, 60×30 ……………………………….21-029-8 ………..171 Corner Mounting Plate ……………………………………27-030 …………..161 Corner Mounting Plate Fastening Set (English) ….21-031E …………161 Corner Mounting Plate Fastening Set (Metric) ……21-031M ………..161 SMART Base Plate 40×80/1.5″x3.0″ …………………27-002-XX ……..172 SMART Base Plate 80×80/3.0″x3.0″ …………………27-003-XX ……..172Bi-Fold Door Guide Bifold Door Glide Set, 28S ………………………………21-080 …………..121 Bifold Door Glide Set, 40S ………………………………21-081 …………..121 Bi-fold Door Guide, 30/28 to 30/28 ……………………25-082 …………..121 Bi-fold Door Guide, 40 to 40 …………………………….25-080 …………..121Bi-Slot Profile 18X32 Bi-Slot ………………………………………………..12-032 …………….54 18×32 Bi-Slot Fastener ……………………………………20-132 …………….54Butt Fastener Butt Fastener 1.0″, 1/4-20 ……………………………….25-017 …………….77 Butt Fastener 1.5″, 5/16-18 ……………………………..25-016 …………….77 Butt Fastener 30/28, M6 ………………………………….20-012 …………….77 Butt Fastener 40, M8 ………………………………………20-006 …………….77Cable/Hose Holder Cable Tie Holder 30/28 …………………………………..22-201 …………….95 Cable Tie Holder 40 ……………………………………….22-202 …………….95 Cable/Hose Holder, 1.5″ ………………………………….22-230 …………….96 Cable/Hose Holder, 40 ……………………………………22-200 …………….96 248 Industrial Profile SystemsIndexCatalog 1816-3/US 249Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA IndexDescription Part # Page #Description Part # Page # Topic Cable/Hose Holder, Qtr Turn Connection …………..22-203 …………….96 Cross Cable Tie Holder 1.0″ …………………………….27-203 …………….95 Cross Cable Tie Holder 40/1.5″ ………………………..27-202 …………….95 T-Clip 40, 10-13mm ………………………………………..22-210 …………….95 T-Clip 40, 13-16mm ………………………………………..22-212 …………….95 T-Clip 40, 16-19mm ………………………………………..22-215 …………….95 T-Clip 40, 6-8mm ……………………………………………22-206 …………….95 T-Clip 40, 8-10mm ………………………………………….22-208 …………….95Casters Caster, Floor Lock ………………………………………….21-325 …………..169 Caster, Hollow King Pin 50mm No Lock ……………21-300 …………..167 Caster, Hollow King Pin 50mm Wheel Lock ……….21-301 …………..167 Caster, Hollow King Pin 75mm Total Lock ………….21-310 …………..167 Caster, M10 Threaded 125mm No Lock ……………21-314 …………..168 Caster, M10 Threaded 125mm Total Lock …………21-315 …………..168 Caster, M12 Threaded Leveler, 1200kg/set ……….21-327 …………..168 Caster, M12 Threaded Leveler, 600kg/set …………21-323 …………..168 Caster, Plate Type Leveler, 1200kg/set ……………..21-328 …………..169 Caster, Plate Type Leveler, 600kg/set ……………….21-324 …………..169 Caster, Plate Type Rigid, 102kg, No Lock ………….21-302 …………..169 Caster, Plate Type Rigid, 136kg, No Lock ………….21-311 …………..169 Caster, Plate Type Swivel, 102kg, No Lock ………..21-303 …………..169 Caster, Plate Type Swivel, 102kg, Total Lock ……..21-304 …………..169 Caster, Plate Type Swivel, 136kg, No Lock ………..21-312 …………..169 Caster, Plate Type Swivel, 136kg, Total Lock ……..21-313 …………..169 Caster, Plate Type Swivel, 410kg, No Lock ………..21-318 …………..169 Caster, Plate Type Swivel, 410kg, Total Lock ……..21-319 …………..169Catches Ball Catch 40 (1/4-20) …………………………………….23-121 …………..151 Ball Catch 40 (M8) …………………………………………23-043 …………..151 Ball Catch, 3-Way (medium) ……………………………23-012 …………..152 Ball Catch, 3-Way (small) ………………………………..23-004 …………..152 Ball Plunger 28, 3/8″ x 18mm …………………………..23-128 …………..152 Ball Plunger 40/40, 1/2″ x 28mm ………………………23-129 …………..152 Catch Bracket Universal ………………………………….27-146 …………..150 Magnetic Catch 20/1.0″ …………………………………..23-045 …………..150 Magnetic Catch 28/30/40/1.5″ ………………………….23-046 …………..150 Magnetic Catch Strike Plate …………………………….23-051 …………..150Central Connector Central Connector Parallel ………………………………20-705 …………….79 Central Connector Perpendicural ……………………..20-704 …………….79Clamp Bar Profile Clamp Bar …………………………………………..12-105 …………….58Clamp Blocks Clamp Block 1, 40 Series, 1 Hole …………………….20-018-1 ………..101 Clamp Block 2, 40 Series, 2 Hole …………………….20-018-2 ………..101 Clamp Block 3, 40 Series, 4 Hole …………………….20-018-4 ………..101Conduit Accessories Conduit Cap 120×120 …………………………………….15-812 …………….72 Conduit Cap 120×160 …………………………………….15-813 …………….72 Conduit Cap 40×120 ………………………………………15-810 …………….72 Conduit Cap 40×160 ………………………………………15-806 …………….72 Conduit Cap 40×40 ………………………………………..15-803 …………….72 Conduit Cap 40×80 ………………………………………..15-804 …………….72 Conduit Cap 80×120 ………………………………………15-811 …………….72 Conduit Cap 80×160 ………………………………………15-807 …………….72 Conduit Cap 80×80 ………………………………………..15-805 …………….72 Conduit Locking Screw 4.2×9.5 ………………………..24-695 …………….72Conduit Profiles Conduit Support 120 ………………………………………15-120 …………….70 Conduit Support 160 ………………………………………15-160 …………….70 Conduit Support 160 with T-Slots ……………………..15-161 …………….70 Conduit Support 40 ………………………………………..15-040 …………….70 Conduit Support 40 with T-Slots ……………………….15-041 …………….70 Conduit Support 80 ………………………………………..15-080 …………….70 Conduit Wall Duct 120…………………………………….15-122 …………….71 Conduit Wall Duct 40………………………………………15-042 …………….71 Conduit Wall Duct 80………………………………………15-082 …………….71Connecting Element Connecting Angle 20, Double ………………………….20-116 …………..105 Connecting Element 28, Flat ……………………………22-145 …………..102 Connecting Element 40, Flat ……………………………22-140 …………..102 Connecting Plate 1.0″ …………………………………….20-310 …………..102 Connecting Plate 1.5″ …………………………………….20-300 …………..102 Connecting Plate 20 ……………………………………….20-117 …………..102 Connecting Plate 20, Double …………………………..20-118 …………..102 Mounting Plate for 16X40………………………………..22-139 …………..101Connector Accessories Connector Cap 30, Radius ………………………………22-151 …………….98 Connector Cap 30, Square ……………………………..22-152 …………….98 Connector Cap 40, 3×45 Degrees …………………….18-822 …………….98 Connector Cap 40, Radius ………………………………18-821 …………….98 Corner Connector Plug 28 ………………………………18-712 …………….99Corner Connectors Corner Bracket 1.5″ ………………………………………..22-153 …………….98 Corner Bracket 30 ………………………………………….22-150 …………….98 Corner Bracket 40 ………………………………………….22-146 …………….98 Corner Connector 1.0″, 2-Way …………………………18-872 …………….99 Corner Connector 1.0″, 3-Way …………………………18-873 …………….99 Corner Connector 1.5″, 2-Way …………………………18-892 …………….99 Corner Connector 1.5″, 3-Way …………………………18-893 …………….99 Corner Connector 20, 2-Way …………………………..18-852 …………….99 Corner Connector 20, 3-Way …………………………..18-853 …………….99 Corner Connector 28, 3-Way …………………………..18-829 …………….99 Corner Connector 30, 2-Way …………………………..18-902 …………….99 Corner Connector 30, 3-Way …………………………..18-903 …………….99 Corner Connector 40, 2-Way …………………………..18-826 …………….99 Corner Connector 40, 3-Way …………………………..18-827 …………….99Corner Element Corner Element 1, 40 ……………………………………..21-035 …………..108 Corner Element 1, 80 ……………………………………..21-036 …………..108 Corner Element 2, 40 ……………………………………..21-037 …………..108 Corner Element 2, 80 ……………………………………..21-038 …………..108 Corner Element 3, 40 ……………………………………..21-135 …………..108 Corner Element 3, 80 ……………………………………..21-136 …………..108Covers Anti-Skid Cover 40 Series ……………………………….12-114 …………….60 Cover Strip 30/28 Series (Black) ………………………12-116B …………..62 Cover Strip 30/28 Series (Clear) ………………………12-116 …………….62 Cover Strip 40 Series (Aluminum)…………………….12-102 …………….62 Cover Strip 40 Series (PVC Black) …………………..12-111B …………..62 Cover Strip 40 Series (PVC Blue) …………………….12-111BL …………62 Cover Strip 40 Series (PVC Clear) …………………..12-111 …………….62 Cover Strip 40 Series (PVC Yellow) ………………….12-111Y …………..62Covers/Gaskets Cover/Gasket Strip 20 Series (Black) ……………….12-115B …………..62 Cover/Gasket Strip 20 Series (Clear) ………………..12-115 …………….62 Cover/Gasket Strip 28 Series (Black) ……………….12-103B …………..62 Cover/Gasket Strip 40 Series (Black) ……………….12-101B …………..62 Cover/Gasket Strip 40 Series (Clear) ………………..12-101 …………….62 Cover/Gasket Strip 40 Series (Gray)…………………12-101G ………….62 Cover/Gasket Strip 40 Series (Yellow) ………………12-101Y …………..62Door Guide System Closure Plate 160×80 ……………………………………..21-156 …………..125 Closure Plate 80×80 ……………………………………….21-155 …………..125 Door Guide ……………………………………………………23-055 …………..125 Guide Insert Set, Inch …………………………………….21-073 …………….55 Roller Insert Set, Inch …………………………………….21-075 …………….55Door Stops Door Stop 30/40, Angled …………………………………23-125 …………..153 250Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsIndexCatalog 1816-3/US 251 Description Part # Page #Description Part # Page # Topic Door Stop, Straight …………………………………………23-124 …………..153 Velcro Plate …………………………………………………..23-158 …………..153End Caps Access Hole Plug, 7mm Nickel ………………………..18-713 …………….63 Access Hole Plug, 7mm Plastic ……………………….18-710 …………….63 Connector Cap 1.5″ ………………………………………..22-154 …………….98 Connector Cap 40, Square ……………………………..18-842 …………….98 End Cap (Secure w/ Stud) Screw …………………….24-212-5 ………….65 End Cap 1.0″x1.0″ ………………………………………….18-1010 …………..64 End Cap 1.0″x2.0″ ………………………………………….18-1020 …………..64 End Cap 1.5″x1.5″ ………………………………………….18-1515 …………..64 End Cap 1.5″x1.5″ Quarter Round ……………………18-1543 …………..64 End Cap 1.5″x3.0″ ………………………………………….18-1530 …………..64 End Cap 160×16 ……………………………………………18-806 …………….63 End Cap 160×28 ……………………………………………18-816 …………….63 End Cap 2.0″x2.0″ ………………………………………….18-2020 …………..64 End Cap 20×10 ……………………………………………..18-830 …………….63 End Cap 20×20 ……………………………………………..18-802 …………….63 End Cap 20×40 ……………………………………………..18-831 …………….63 End Cap 28×28 ……………………………………………..18-808 …………….63 End Cap 28×28, Secure ………………………………….18-911 …………….65 End Cap 28x28x45 Degree s ……………………………18-844 …………….63 End Cap 28×56 ……………………………………………..18-809 …………….63 End Cap 28X56, Secure …………………………………18-912 …………….65 End Cap 3.0″x3.0″ ………………………………………….18-3030 …………..64 End Cap 30×30 ……………………………………………..18-803 …………….63 End Cap 30×30, Quarter Round ………………………18-838 …………….63 End Cap 30×30, Secure ………………………………….18-919 …………….65 End Cap 30×60 ……………………………………………..18-863 …………….63 End Cap 30×60, Secure ………………………………….18-920 …………….65 End Cap 32×18 ……………………………………………..18-807 …………….63 End Cap 40-45o …………………………………………….18-845 …………….63 End Cap 40×120 ……………………………………………18-840 …………….63 End Cap 40×16 ……………………………………………..18-811 …………….63 End Cap 40×160 ……………………………………………18-817 …………….63 End Cap 40×40 ……………………………………………..18-813 …………….63 End Cap 40×40 (20 Series) ……………………………..18-832 …………….63 End Cap 40×40 Heavy Square…………………………18-805 …………….63 End Cap 40×40 Quarter Round ……………………….18-843 …………….63 End Cap 40×40, Secure ………………………………….18-913 …………….65 End Cap 40×40, Secure w/ Stud ………………………18-916 …………….65 End Cap 40×40-45 Degree s ……………………………18-820 …………….63 End Cap 40×80 ……………………………………………..18-814 …………….63 End Cap 40×80, Secure ………………………………….18-914 …………….65 End Cap 40×80, Secure w/ Stud ………………………18-917 …………….65 End Cap 56×56 (Post Profile) …………………………..18-819 …………….63 End Cap 80×120 ……………………………………………18-841 …………….63 End Cap 80×16 ……………………………………………..18-812 …………….63 End Cap 80×160 ……………………………………………18-818 …………….63 End Cap 80×80 ……………………………………………..18-815 …………….63 End Cap 80×80, Secure ………………………………….18-918 …………….65 End Cap 80×80, Secure w/ Stud ………………………18-915 …………….65 End Cap Push-in Fastener ………………………………18-715 …………….65 End Cap R40/80-30 Degrees …………………………..18-883 …………….63 End Cap R40/80-45 Degrees …………………………..18-885 …………….63 End Cap R40/80-60 Degrees …………………………..18-886 …………….63Feet Knuckle Foot 1.0″ 1/4-20 x 1.44″ ………………………21-410 …………..157 Knuckle Foot 1.0″ 3/8-16 x 2.50″ ………………………21-403 …………..159 Knuckle Foot 1.0″ Steel 1/4-20 x 1.44″………………21-412 …………..157 Knuckle Foot 1.5″ 1/2-13 x 3.15″ ………………………21-404 …………..160 Knuckle Foot 1.5″ 1/2-13 x 5.50″ ………………………21-405 …………..160 Knuckle Foot 1.5″ 3/8-16 x 2.38″ ………………………21-411 …………..157 Knuckle Foot 1.5″ 5/16-18 x 2.00″ …………………….21-401 …………..159 Knuckle Foot 1.5″ 5/16-18 x 2.50″ …………………….21-402 …………..159 Knuckle Foot 1.5″ 5/8-11 x 3.15″ ………………………21-406 …………..160 Knuckle Foot 1.5″ 5/8-11 x 5.50″ ………………………21-407 …………..160 Knuckle Foot 1.5″ Steel 1/2-13 x 2.63″………………21-414 …………..157 Knuckle Foot 1.5″ Steel 3/8-16 x 2.38″………………21-413 …………..157 Knuckle Foot 1/2-13 Bolt Down ………………………..21-420 …………..158 Knuckle Foot 30/28 M8 …………………………………..21-010 …………..159 Knuckle Foot 40 M10x80 ………………………………..21-012 …………..159 Knuckle Foot 40 M8x60 ………………………………….21-009 …………..159 Knuckle Foot 40 M8x80 ………………………………….21-008 …………..159 Knuckle Foot 5/8-11 Bolt Down ………………………..21-421 …………..158 Knuckle Foot 80 Clamping Shoe ………………………21-021 …………..161 Knuckle Foot 80 Rubber Insert ………………………..21-020 …………..161 Knuckle Foot 80, M12x100 ……………………………..21-013 …………..160 Knuckle Foot 80, M12x160 ……………………………..21-014 …………..160 Knuckle Foot 80, M16x100 ……………………………..21-016 …………..160 Knuckle Foot 80, M16x160 ……………………………..21-018 …………..160 Knuckle Foot Anti-Vibe 1/2-13 Heavy ……………….21-424 …………..158 Knuckle Foot Anti-Vibe 1/2-13 Light ………………….21-422 …………..158 Knuckle Foot Anti-Vibe 1/2-13 Medium ……………..21-423 …………..158 Knuckle Foot HD, M20 Anti-Skid.. …………………….21-015 …………..157 Knuckle Foot HD, M20 Heavy Duty…. ……………….21-224 …………..157 Leveling Foot 20, M5X25 ………………………………..21-007 …………..156 Leveling Foot 30, M8X9 ………………………………….21-001-30 ………156 Leveling Foot 40, M8X16 ………………………………..21-001 …………..156 Leveling Foot L-Base 1.0″ ……………………………….21-416 …………..162 Leveling Foot L-Base 1.5″ ……………………………….21-415 …………..162 Leveling Foot L-Base 28 …………………………………21-022-28 ………162 Leveling Foot L-Base 30 …………………………………21-022-30 ………162 Leveling Foot L-Base 40 …………………………………21-022 …………..162Flat Plate Fastener Flat Plate Fastener 1.5″…………………………………..25-028 …………….77 Flat Plate Fastener 40 …………………………………….20-028 …………….77 Flat Plate Only ………………………………………………20-028Z1 …………77Floor Mounting Economy Floor Mounting Bracket 1″ …………………28-502 …………..164 Economy Floor Mounting Bracket 1.5″ ………………28-504 …………..164 Economy Floor Mounting Bracket 2″ …………………28-507 …………..164 Economy Floor Mounting Bracket 20 ………………..28-501 …………..164 Economy Floor Mounting Bracket 20X20 …………..28-506 …………..164 Economy Floor Mounting Bracket 3.0″ ………………28-509 …………..164 Economy Floor Mounting Bracket 30 ………………..28-503 …………..164 Economy Floor Mounting Bracket 40 ………………..28-505 …………..164 Economy Floor Mounting Bracket 60 ………………..28-508 …………..164 Economy Floor Mounting Bracket 80 ………………..28-510 …………..164 Flange Foot 40/1.5″ ………………………………………..27-050 …………..165 Flange Foot 40X80/1.5″X3″ ……………………………..27-055 …………..165 Flange Foot 80/3″ …………………………………………..27-056 …………..165 Floor Anchor 1.0″ …………………………………………..21-061 …………..162 Floor Anchor 1.5″ …………………………………………..21-060 …………..162 Floor Anchor 28 …………………………………………….21-023-28 ………162 Floor Anchor 30 …………………………………………….21-023-30 ………162 Floor Anchor 40 …………………………………………….21-023 …………..162 Floor Fastening Set ………………………………………..21-032 …………..161 Floor Mounting Bracket 28/30/1.0″ ……………………27-059 …………..163 Floor Mounting Bracket 40/1.5″ ………………………..27-057 …………..163 Floor Mounting Bracket 56/60/2.0″ ……………………27-060 …………..163 Floor Mounting Bracket 80/3.0″ ………………………..27-058 …………..163Gasket Mesh Gasket 8 ………………………………………………12-107 …………….61 Panel Gasket 10 …………………………………………….12-108 …………….61 Panel Gasket 8 ………………………………………………12-106 …………….61 Profile Panel Holder (Black) …………………………….12-016B …………..57 Push-In Panel Seal (3mm) ………………………………12-117-3 ………….62 Push-In Panel Seal (6mm) ………………………………12-117-6 ………….62 Safety Cover Strip ………………………………………….12-113 …………….62 250 Industrial Profile SystemsIndexCatalog 1816-3/US 251Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA IndexDescription Part # Page #Description Part # Page # TopicGusset Economy Gusset 20/1″ …………………………………..28-600 …………..104 Economy Gusset 28/30 …………………………………..28-601 …………..104 Economy Gusset 28×56/30×60/1″x2″ ………………..28-603 …………..105 Economy Gusset 40/1.5″ ………………………………..28-602 …………..104 Economy Gusset 56/60 …………………………………..28-605 …………..104 Economy Gusset 56×56/60×60 ………………………..28-607 …………..105 Economy Gusset 80/3″ …………………………………..28-604 …………..105 Economy Gusset 80/3″ …………………………………..28-606 …………..104 Economy Gusset 80×80/3″x3″………………………….28-608 …………..105 Gusset 20 ……………………………………………………..20-1010 …………107 Gusset 40 ……………………………………………………..20-4040 …………107 Gusset 40×80 ………………………………………………..20-8040 …………107 Gusset Bracket 1.0″ ……………………………………….20-442 …………..106 Gusset Bracket 1.5″ ……………………………………….20-440 …………..106 Gusset Bracket 3.0″ ……………………………………….20-441 …………..106 Gusset Bracket 30/28, 80×28 …………………………..20-101 …………..106 Gusset Bracket 40, 40×40 ……………………………….20-102 …………..106 Gusset Bracket 40, 80×80 ……………………………….20-103 …………..106 Machined Gusset 1.0″ …………………………………….20-506 …………..109 Machined Gusset 1.0″X2.0″ …………………………….20-507 …………..109 Machined Gusset 1.5″ …………………………………….20-508 …………..109 Machined Gusset 1.5″X3.0″ …………………………….20-509 …………..109 Machined Gusset 28 ………………………………………20-2828M ………109 Machined Gusset 28X56 …………………………………20-2856M ………109 Machined Gusset 40 ………………………………………20-4040M ………109 Machined Gusset 40X80 …………………………………20-4080M ………109Handle/Stiffiner Profile Stiffener / Handle …………………………………12-011 …………….57Handles Handle, 20 …………………………………………………….23-233 …………..132 Handle, Large Angled …………………………………….23-074 …………..131 Handle, Light Duty Aluminum…………………………..23-030 …………..130 Handle, Light Duty Aluminum, Angled ………………23-034 …………..130 Handle, Medium Open Angled …………………………23-075 …………..131 Handle, Medium Open Caps ……………………………23-076 …………..131 Handle, Multipurpose Plastic, 112mm ………………23-033 …………..132 Handle, Multipurpose Plastic, 170mm ………………23-028 …………..132 Handle, Qtr Turn 28, L Handle, Locking …………….23-040 …………..146 Handle, Qtr Turn 28, L Handle, Non-Locking ……..23-041 …………..146 Handle, Qtr Turn 40, L Handle, Locking …………….23-038 …………..146 Handle, Qtr Turn 40, L Handle, Non-Locking ……..23-039 …………..146 Handle, Qtr Turn 40, Square Insert …………………..23-135 …………..146 Handle, Qtr Turn 40, T Handle, Non-Locking ……..23-133 …………..146 Handle, Qtr Turn 40, Wing Knob, Locking ………….23-134 …………..146 Handle, Qtr Turn Inside Mount …………………………23-159 …………..147 Handle, Qtr Turn Pnl Mount, Square Insert, Locking ………………………………………………………23-145 …………..147 Handle, Qtr Turn Pnl Mount, T-Handle, Non-Locking ……………………………………………….23-143 …………..147 Handle, Qtr Turn Pnl Mount, Wing Knob, Locking .23-144 …………..147 Handle, Tube Style Center Support …………………..23-073 …………..133 Handle, Tube Style Coated Steel Tubing ……………13-012 …………..133 Handle, Tube Style Ends …………………………………23-072 …………..133 Qtr Turn Backing Plate ……………………………………23-038Z1 ……….148 Qtr Turn Cam, Hooked ……………………………………23-142Z1 ……….148 Qtr Turn Cam, Offset 10 ………………………………….23-140Z5 ……….148 Qtr Turn Cam, Offset 16 ………………………………….23-140Z4 ……….148 Qtr Turn Cam, Offset -2 …………………………………..23-140Z6 ……….148 Qtr Turn Cam, Offset 8 ……………………………………23-140Z3 ……….148 Qtr Turn Keeper Bracket ………………………………….23-140Z7 ……….148 Qtr Turn Spare Key …………………………………………23-140Z1 ……….148 Qtr Turn Spare Key …………………………………………23-140Z2 ……….148Hinge Concealed Hinge 40 ………………………………………23-225 …………..142 Concealed Hinge, Half Hinge …………………………..23-225Z1 ……….142 Concealed Hinge, Hinge Pin ……………………………23-225Z2 ……….142 Hinge, 20 Light Duty ………………………………………23-020 …………..134 Hinge, 28 Light Duty, Left Side …………………………23-019 …………..135 Hinge, 28 Light Duty, Right Side ………………………23-018 …………..135 Hinge, 30 Medium Duty …………………………………23-024 …………..140 Hinge, 30/28 Medium Duty ……………………………..23-242 …………..134 Hinge, 40 Lift Off Left ……………………………………..23-440L …………144 Hinge, 40 Lift Off Right ……………………………………23-440R …………144 Hinge, 40 Light Duty, Left Side …………………………23-023 …………..136 Hinge, 40 Light Duty, Right Side ………………………23-021 …………..136 Hinge, 40 Medium Duty …………………………………23-025 …………..140 Hinge, 40 Medium Duty (Locking) …………………….23-025L …………140 Hinge, 40 Steel Heavy Duty (Black) ………………….23-011B …………144 Hinge, 40 Steel Heavy Duty (Clear) ………………….23-011 …………..144 Hinge, Adjustable 28 ………………………………………23-220 …………..141 Hinge, Adjustable 40 ………………………………………23-222 …………..141 Hinge, Medium Duty Plastic Lift Off Left 1.0″ ……..23-550L …………137 Hinge, Medium Duty Plastic Lift Off Left 1.5″ ……..23-551L …………138 Hinge, Medium Duty Plastic Lift Off Left 28/30-40 23-535L …………137 Hinge, Medium Duty Plastic Lift Off Left 40-40 …..23-545L …………137 Hinge, Medium Duty Plastic Lift Off Right 1.0″ ……23-550R …………137 Hinge, Medium Duty Plastic Lift Off Right 1.5″ ……23-551R …………138 Hinge, Medium Duty Plastic Lift Off Right 28/30-40 …………………………………………………….23-535R …………137 Hinge, Medium Duty Plastic Lift Off Right 40-40 …23-545R …………137 Hinge, Medium Duty Plastic Non-Removable 1.0″ 23-550 …………..137 Hinge, Medium Duty Plastic Non-Removable 1.5″ 23-551 …………..138 Hinge, Medium Duty Plastic Non-Removable 1.5″ to1″ …………………………………………………….23-552 …………..138 Hinge, Medium Duty Plastic Non-Removable 28/30-40 …………………………………………………….23-535 …………..137 Hinge, Medium Duty Plastic Non-Removable 40-40 …………………………………………………………23-545 …………..137 Hinge, Medium Duty Steel Lift Off Left 28-28……..23-250L …………139 Hinge, Medium Duty Steel Lift Off Left 28-40……..23-251L …………139 Hinge, Medium Duty Steel Lift Off Left 40-40……..23-252L …………139 Hinge, Medium Duty Steel Lift Off Right 28-28 …..23-250R …………139 Hinge, Medium Duty Steel Lift Off Right 28-40 …..23-251R …………139 Hinge, Medium Duty Steel Lift Off Right 40-40 …..23-252R …………139 Hinge, Medium Duty Steel Non-Removable 28-28 …………………………………………………………23-250 …………..139 Hinge, Medium Duty Steel Non-Removable 28-40 …………………………………………………………23-251 …………..139 Hinge, Medium Duty Steel Non-Removable 40-40 …………………………………………………………23-252 …………..139 Hinge, Multi-Series …………………………………………23-016 …………..143 Hinge, Positioning, 120 Degree s ………………………23-226 …………..142Joining Plates Joining Plate 1, 1.0″ ……………………………………….20-311 …………..102 Joining Plate 1, 1.5″ ……………………………………….20-301 …………..102 Joining Plate 1, 80 …………………………………………20-108 …………..102 Joining Plate 1.0″, Corner ……………………………….20-314 …………..103 Joining Plate 1.0″, T ……………………………………….20-315 …………..103 Joining Plate 1.5″, Corner ……………………………….20-304 …………..103 Joining Plate 1.5″, T ……………………………………….20-305 …………..103 Joining Plate 2, 1.0″ ……………………………………….20-312 …………..102 Joining Plate 2, 1.5″ ……………………………………….20-302 …………..102 Joining Plate 2, 2.0″ ……………………………………….20-313 …………..102 Joining Plate 2, 3.0″ ……………………………………….20-303 …………..102 Joining Plate 2, 40 …………………………………………20-111 …………..102 Joining Plate 2, 80 …………………………………………20-112 …………..102 Joining Plate 28, Corner …………………………………20-105 …………..103 Joining Plate 28, T …………………………………………20-106 …………..103 Joining Plate 28-40 ………………………………………..20-104 …………..102 252Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsIndexCatalog 1816-3/US 253 Description Part # Page #Description Part # Page # Topic Joining Plate 3.0″, Corner ……………………………….20-307 …………..103 Joining Plate 3.0″, T ……………………………………….20-306 …………..103 Joining Plate 40, Corner …………………………………20-109 …………..103 Joining Plate 40, T …………………………………………20-110 …………..103 Joining Plate 80, Corner …………………………………20-113 …………..103 Joining Plate 80, T …………………………………………20-114 …………..103Latches Deadbolt Latch ………………………………………………23-160 …………..149 Slam Latch – Locking………………………………………23-155 …………..149 Slam Latch – Non-Locking ……………………………….23-156 …………..149Linear Roller System Fastening Set for Bearing Unit 6 ………………………20-007 …………..217 Fastening Set for Mounting Plate RU40 …………….20-129 …………..225 Fastening Set HD for Bearing Unit 14 ……………….20-030 …………..219 LR Bumper ……………………………………………………31-808 …………..227 Pulley, 8mm Bore Reversing Unit 40 …………………31-125 …………..225 Pulley, Idler Reversing Unit 40 …………………………31-127 …………..225 Pulley, Spline Reversing Unit 40 ………………………31-123 …………..225 Roller System 14 HD, End Cap/Lubricating System ………………………………………………………30-503Z6 ……….230 Roller System 14 HD, Replacement Felt ……………30-114Z5 ……….230 Roller System 14 HD, Single Bearing Unit Centric ……………………………………………………….30-111 …………..222 Roller System 14 HD, Single Bearing Unit Eccentric ……………………………………………………30-113 …………..222 Roller System 14, Double Bearing Unit Centric ….30-102 …………..222 Roller System 14, Double Bearing Unit Eccentric .30-104 …………..222 Roller System 14, End Cap/Lubricating System …30-107 …………..230 Roller System 14, Linear Shaft ………………………..13-513 …………..229 Roller System 14, Replacement Felt …………………30-107Z1 ……….230 Roller System 14, Shaft Clamp ………………………..13-114 …………..229 Roller System 14, Single Bearing Unit Centric …..30-101 …………..222 Roller System 14, Single Bearing Unit Eccentric ..30-103 …………..222 Roller System 25, End Cap/Lubricating System …30-207 …………..230 Roller System 25, Linear Shaft ………………………..13-524 …………..229 Roller System 25, Replacement Felt …………………30-207Z1 ……….230 Roller System 25, Shaft Clamp ………………………..13-125 …………..229 Roller System 6, Double Bearing Unit Centric ……30-402 …………..222 Roller System 6, Double Bearing Unit Eccentric …30-404 …………..222 Roller System 6, End Cap/Lubricating System …..30-407 …………..230 Roller System 6, Linear Shaft ………………………….13-505 …………..229 Roller System 6, Replacement Felt …………………..30-407Z5 ……….230 Roller System 6, Shaft Clamp ………………………….13-106 …………..229 Roller System 6, Single Bearing Unit Centric …….30-401 …………..222 Roller System 6, Single Bearing Unit Eccentric ….30-403 …………..222 Roller System Adapter Flange, A&D …………………31-014AD ………213 Roller System Adapter Flange, B ……………………..31-014B …………213 Roller System Adapter Flange, C……………………..31-014C …………213 Roller System Adapter Flange, E ……………………..31-014E …………213 Roller System Adapter Flange, F ……………………..31-014F …………213 Roller System Adapter Flange, G …………………….31-014G ………..213 Roller System Adapter Shaft, A ……………………….31-001 …………..213 Roller System Adapter Shaft, B ……………………….31-002 …………..213 Roller System Adapter Shaft, Blank ………………….31-010 …………..213 Roller System Adapter Shaft, C ……………………….31-003 …………..213 Roller System Adapter Shaft, D ……………………….31-004 …………..213 Roller System Adapter Shaft, E ……………………….31-005 …………..213 Roller System Adapter Shaft, F ……………………….31-006 …………..213 Roller System Belt 25T10 Clamping Block ………..31-030 …………..226 Roller System Components, Bolt, 14-Centric …….30-105 …………..223 Roller System Components, Bolt, 14-Eccentric ….30-106 …………..223 Roller System Components, Bolt, 6-Centric ………30-006 …………..223 Roller System Components, Bolt, 6-Eccentric ……30-007 …………..223 Roller System Components, Spacer Shim, LR14 .30-108Z1 ……….223 Roller System Components, Spacer Shim, LR14HD …………………………………………………….30-114Z3 ……….223 Roller System Components, Track Roller, Track Dia. 14 ……………………………………………….30-108 …………..223 Roller System Components, Track Roller, Track Dia. 6 …………………………………………………30-008 …………..223 Roller System Exciter Cam ……………………………..31-033 …………..228 Roller System Hi-Flex Timing Belt …………………….31-052-1 ………..226 Roller System Limit Stop – Bi-Directional …………..31-038 …………..227 Roller System Limit Stop – Single Direction ……….31-037 …………..227 Roller System Proximity Switch ……………………….31-035 …………..228 Roller System Proximity Switch Mounting Element ……………………………………….31-036 …………..228 Roller System Reversing Unit 40 Mounting Plate .31-129 …………..225 Roller System Reversing Unit 40, 8mm Bore ……..31-124 …………..225 Roller System Reversing Unit 40, Idler ……………..31-126 …………..225 Roller System Reversing Unit 40, Spline Pulley….31-122 …………..225 Roller System Tensioning Block ……………………….31-031 …………..226 Roller System Universal Adapter Flange …………..31-014 …………..213 Rubber Shock Absorber ………………………………….31-037Z3A ……..227 Spline Shaft, LR …………………………………………….13-566 …………..229Mesh Clamp Profile Mesh Clamp ………………………………………..12-010 …………….58Mesh Retainer Wire Mesh Retainer 20 …………………………………..20-200 …………..119 Wire Mesh Retainer 40 …………………………………..20-202 …………..119 Wire Mesh Retainer Economy 40 (1/4-20) …………22-111 …………..120 Wire Mesh Retainer Economy 40 (M6) ……………..22-110 …………..120Milling Connector Milling Connector 30 ………………………………………28-005 …………….79 Milling Connector 40/1.5″ ………………………………..28-004 …………….79Miter Connector Miter Bracket …………………………………………………20-127 …………….81 Miter Connector 1.0″, Fixed …………………………….25-026 …………….81 Miter Connector 1.5″, Variable …………………………25-024 …………….81 Miter Connector 30/28 Fixed 90 Degrees …………..20-128 …………….81 Miter Connector 30/28 Fixed Only ……………………20-128Z1 …………81 Miter Connector 40, Variable ……………………………20-022 …………….81Multiblocks Multiblock 25 CS ……………………………………………22-117 …………..118 Multiblock Aluminum, M5 ………………………………..22-105 …………..117 Multiblock Aluminum, M6 ………………………………..22-106 …………..117 Multiblock Aluminum, M8 ………………………………..22-108 …………..117 Multiblock PA 1.0″, 1/4-20 ……………………………….22-116 …………..118 Multiblock PA 20, M4 ………………………………………22-104 …………..118 Multiblock PA 30/28, M6 ………………………………….22-103 …………..116 Multiblock PA 40, M6 ………………………………………22-100 …………..116 Multiblock PA Universal, 1/4-20 ………………………..22-115 …………..116 Multiblock, Clamp Style 30/28 ………………………….22-113 …………..117 Multiblock, Clamp Style 40 ………………………………22-112 …………..117 Uniblock PA 20, M4 ………………………………………..22-107 …………..118Nuts Metric Nuts ……………………………………………………24-7XX-X …………89 English Nuts ………………………………………………….25-7XX-X …………89Panel Material Panel, 10mm TRESPA – Blue………………………. …..26-430-10 ………113 Panel, 6mm TRESPA – Black …………………………..26-410-6 ………..113 Panel, 6mm TRESPA – Blue …………………………….26-430-6 ………..113 Panel, 6mm TRESPA – Grey ……………………………26-420-6 ………..113 Panel, 6mm TRESPA – White …………………………..26-480-6 ………..113 Panel, 8mm TRESPA – Black …………………………..26-410-8 ………..113 Panel, Aluminum Veneer, 6mm, Black ………………26-110-6 ………..114 Panel, Aluminum Veneer, 6mm, Clear ………………26-170-6 ………..114 Panel, Aluminum Veneer, 6mm, White ………………26-180-6 ………..114 252 Industrial Profile SystemsIndexCatalog 1816-3/US 253Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Index Panel, Expanded PVC, 6mm, Black ………………….26-510-6 ………..114 Panel, Expanded PVC, 6mm, Blue …………………..26-530-6 ………..114 Panel, Expanded PVC, 6mm, White …………………26-580-6 ………..114 Panel, Polycarbonate 3mm, Clear …………………….26-790-3 ………..113 Panel, Polycarbonate, Clear …………………………….26-790-6 ………..113 Panel, Polycarbonate, Light Smoked ………………..26-795-6 ………..113 Panel, Wire Mesh .5″x.5″ Black ………………………..26-210-05 ………113 Panel, Wire Mesh 1″x1″ Black ………………………….26-210-10 ………113 Panel, Wire Mesh 1″x1″ Yellow …………………………26-250-10 ………113 Panel, Wire Mesh 1.5″x1.5″ Black …………………….26-210-15 ………113 Panel, Wire Mesh 2″x2″ Black ………………………….26-210-20 ………113Panel Retainer Panel Retainer 20 ………………………………………….20-200P …………119 Panel Retainer 40 ………………………………………….20-202P …………119Pivot Joint Pivot Joint 1.0″ ………………………………………………23-260 …………..145 Pivot Joint 1.0″ with Clamp Handle …………………..23-261 …………..145 Pivot Joint 1.5″ ………………………………………………23-262 …………..145 Pivot Joint 1.5″ with Clamp Handle …………………..23-263 …………..145 Pivot Joint 30/28 (Black) …………………………………23-013B …………145 Pivot Joint 30/28 (Clear)………………………………….23-013 …………..145 Pivot Joint 30/28 with Clamp Handle (Black) ……..23-015B …………145 Pivot Joint 30/28 with Clamp Handle (Clear) ……..23-015 …………..145 Pivot Joint 40 (Black) ……………………………………..23-010B …………145 Pivot Joint 40 (Clear)………………………………………23-010 …………..145 Pivot Joint 40 with Clamp Handle (Black) ………….23-014B …………145 Pivot Joint 40with Clamp Handle (Clear) …………..23-014 …………..145Pneumatics Blank Plate 40X80 …………………………………………21-4000Z1 ……..178 Blank Plate 80X80 …………………………………………21-8000Z1 ……..178 Pneumatic Connector Plate 40×80 …………………..21-040ZX ……….176 Pneumatic Connector Plate 80×80 …………………..21-043ZX ……….176 Pneumatic Fastener, Butt-Fastening Set ……………20-012 …………..178 Pneumatic Fastener, Universal ………………………..20-011 …………….78 Pneumatic Joining Plate, Inline, 80×127 ……………21-045 …………..177 Pneumatic Joining Plate, T, 80×80 ……………………21-044 …………..177 Pneumatic Seal 120×40 ………………………………….21-144 …………..179 Pneumatic Seal 80×40 ……………………………………21-041 …………..179 Pneumatic Seal 80×80 ……………………………………21-042 …………..179 Pneumatic Seal 80×80 T-Joining ………………………21-046 …………..179Profile Connectors Angle Connector 40/1.5″, 45 Degrees ……………….27-600 …………..100 Cross Connector 1.5″, Double Tab ……………………25-027 …………..100Profile to Wall Fastener Profile to Wall Fastener 40, M8 ………………………..20-015 …………….80Rack Angle Profile Rack Angle no Holes ……………………………12-110 …………….59 Profile Rack Angle with Holes ………………………….12-109 …………….59 Rack Angle Clip Nut #10-32 …………………………….25-075 …………….94 Rack Angle Clip Nut 1/4-20 ……………………………..25-076 …………….94 Rack Angle Clip Nut M5 ………………………………….20-075 …………….94 Rack Angle Clip Nut M6 ………………………………….20-076 …………….94Rail Cart Rail Cart, 4 Roller…………………………………………..23-201 …………..128 Rail Cart, 4 Roller w/ Fastening Set ………………….23-202 …………..128 Rail Cart, 8 Roller…………………………………………..23-200 …………..128Ratchet Lever Ratchet Lever M8x16 ……………………………………..23-316 …………..201 Ratchet Lever M8x20 ……………………………………..23-320 …………..201 Ratchet Lever M8x25 ……………………………………..23-325 …………..201 Ratchet Lever M8x40 ……………………………………..23-340 …………..201 Ratchet Lever M8x50 ……………………………………..23-350 …………..201 Ratchet Lever M8x63 ……………………………………..23-363 …………..201Roller Track Conv Roller Track 7/8″ Dia ………………………………14-100 …………..203Rollers Roller 40 ……………………………………………………….21-069 …………..126 Roller Insert 25 ……………………………………………..21-065 …………..127 Shoulder Bolt M5x6x25 …………………………………..800.17 …………..126Rolling Door Guide Guide Insert Set, Metric ………………………………….21-067 …………….55 Guide Profile UHMW ………………………………………12-421 …………….55 Profile Rolling Door Guide ………………………………12-022 …………….55 Roller Insert Set, Metric ………………………………….21-068 …………….55Screws Screws, Button Head (English) ………………………..25-1XX-X …………92 Screws, Button Head (Metric) ………………………….24-1XX-X …………90 Screws, Flat Head (English) …………………………….25-2XX-X …………92 Screws, Flat Head (Metric)………………………………24-2XX-X …………90 Screws, Set Screws w/ Hexagon Socket (English) …………………………………………………….25-5XX-XX ………94 Screws, Set Screws w/ Hexagon Socket (Metric) .24-5XX-XX ………94 Screws, Socket Head (English) ………………………..25-3XX-X …………92 Screws, Socket Head (Metric) ………………………….24-3XX-X …………90 Screws, T-Bolt (Metric) ……………………………………24-4XX-X …………88Self Tapping Connector Self Tapping Connector 40 ………………………………20-019 …………….80Services 45 Degrees Miter Cut up to 80×80 (3″x3″) …………19-105 …………..231 45 Degrees Miter Cut, 6″x1.5″ …………………………19-106 …………..231 Chamfer Panel Corner ……………………………………19-029 …………..231 Drill & Tap for M3 or M4…………………………………..19-013 …………..231 Drill & Tap for M5, M6, M8 or M10…………………….19-012 …………..231 Drill & Tap M12 or M16 (Knuckle Foot 80) …………19-014 …………..231 Drill 0.375″ or 0.500″ hole for Ball Plunger …………19-022 …………..231 Drill 20mm x 6mm for Pneumatic Universal Fastener …………………………………………………….19-020 …………..231 Drill 7mm Access Hole ……………………………………19-011 …………..231 Drill 7mm Access Hole through 160mm Side …….19-025 …………..231 Drill and Counter Bore for BHCS or SHCS ………..19-004 …………..231 Drill and Counter Bore for FHCS………………………19-006 …………..231 Drill and Tap M10 (Knuckle foot 80) ………………….19-017 …………..231 Drill and Tap M8 (Knuckle Foot 40) …………………..19-016 …………..231 Drill hole 0.323″ for 40 & 80 profiles ………………….19-140 …………..231 Drill through hole for Side Mounting Knuckle Foot 19-023 …………..231 Drill thru panel up to 10mm for screws………………19-027 …………..231 Drill/Tap/Mill for Roller PA ………………………………..19-103 …………..231 Mill Square up to 160×80 ………………………………..19-102 …………..231 Mill Square up to 80×40 ………………………………….19-100 …………..231 Mill square up to 80×80 …………………………………..19-101 …………..231 Miter Connection Counter Bore ……………………….19-211 …………..231 Notch Panel Corner ……………………………………….19-030 …………..231 Panel cut to size …………………………………………….19-032 …………..231 Panel Packaging for secure transport ……………….19-026 …………..231 Saw Cut For Linear Shafts ………………………………19-007 …………..231 Service for Dowel (Securing Linear Shaft) …………19-019 …………..231 Service for Quarter Turn Handles (22.5mm Dia) …19-018 …………..231 Service, Saw Cut to 160x80mm ……………………….19-003 …………..231 Service, Saw Cut to 80x40mm …………………………19-001 …………..231 Service, Saw Cut to 80x80mm …………………………19-002 …………..231 Special Miter Cut ……………………………………………19-104 …………..231 Special Service Cut………………………………………..19-031 …………..231 Step Drill for Universal Fastener 40 or 28 ………….19-015 …………..231 Tap Profile End 5/16-18 ………………………………….19-009 …………..231 Tap profile End M8 …………………………………………19-010 …………..231Slide Blocks High Cycle Nut #10-32 ……………………………………25-705-2 ………….94 Shim Pack 160 ………………………………………………30-812Z2 ……….200 Shim Pack 80 ………………………………………………..30-412Z2 ……….200 Slide Block 1.0″ Double Flange, 2.00″ ………………30-1002 …………192Description Part # Page #Description Part # Page #Topic 254Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Industrial Profile SystemsIndexCatalog 1816-3/US 255 Slide Block 1.0″ Double Flange, 4.00″ ………………30-1004 …………192 Slide Block 1.0″ Side Flange Extended, 4.00″ ……30-1024 …………195 Slide Block 1.0″ Side Flange, 2.00″ …………………..30-1012 …………194 Slide Block 1.0″ Side Flange, 4.00″ …………………..30-1014 …………194 Slide Block 1.5″ Double Flange, 3.00″ ………………30-1503 …………196 Slide Block 1.5″ Double Flange, 6.00″ ………………30-1506 …………196 Slide Block 1.5″ High Cycle Double ………………….30-1506HC …….196 Slide Block 1.5″ High Cycle Extended, Single ……30-1516HC …….199 Slide Block 1.5″ High Cycle Flush, Single ………….30-1513HC …….198 Slide Block 1.5″ High Cycle Flush, Single ………….30-1523HC …….198 Slide Block 1.5″ High Cycle Single ……………………30-1503HC …….196 Slide Block 1.5″ Side Flange Extended, 4.50″ ……30-1516 …………199 Slide Block 1.5″ Side Flange, 3.00″ …………………..30-1513 …………198 Slide Block 1.5″ Side Flange, 6.00″ …………………..30-1523 …………198 Slide Block 2.0″ Double Flange, 2.00″ ………………30-2002 …………193 Slide Block 2.0″ Double Flange, 4.00″ ………………30-2004 …………193 Slide Block 28 Double Flange, 100mm ……………..30-2808 …………192 Slide Block 28 Double Flange, 50mm ……………….30-2801 …………192 Slide Block 28 Ratcheting L-Handle………………….30-0001 …………201 Slide Block 28 Side Flange Extended, 140mm …..30-2829 …………195 Slide Block 28 Side Flange Extended, 90mm …….30-2822 …………195 Slide Block 28 Side Flange, 100mm …………………30-2828 …………194 Slide Block 28 Side Flange, 50mm …………………..30-2821 …………194 Slide Block 28 Star Handle ……………………………..30-0005 …………201 Slide Block 3.0″ Double Flange, 3.00″ ………………30-3003 …………197 Slide Block 3.0″ Double Flange, 6.00″ ………………30-3006 …………197 Slide Block 3.0″ High Cycle Double ………………….30-3006HC …….197 Slide Block 3.0″ High Cycle Single ……………………30-3003HC …….197 Slide Block 40 Double Flange, 160mm ……………..30-4008 …………196 Slide Block 40 Double Flange, 80mm ……………….30-4001 …………196 Slide Block 40 High Cycle Double …………………….30-4008HC …….196 Slide Block 40 High Cycle Extended, Double …….30-4029HC …….199 Slide Block 40 High Cycle Extended, Single ………30-4022HC …….199 Slide Block 40 High Cycle Flush, Double …………..30-4028HC …….198 Slide Block 40 High Cycle Flush, Single ……………30-4021HC …….198 Slide Block 40 High Cycle Single ……………………..30-4001HC …….196 Slide Block 40 Ratcheting L-Handle………………….30-0011 …………201 Slide Block 40 Side Flange Extended, 120mm …..30-4022 …………199 Slide Block 40 Side Flange Extended, 200mm …..30-4029 …………199 Slide Block 40 Side Flange, 160mm …………………30-4028 …………198 Slide Block 40 Side Flange, 80mm …………………..30-4021 …………198 Slide Block 40 Star Handle ……………………………..30-0015 …………201 Slide Block 56 Double Flange, 100mm ……………..30-5608 …………193 Slide Block 56 Double Flange, 50mm ……………….30-5601 …………193 Slide Block 80 Double Flange, 160mm ……………..30-8008 …………197 Slide Block 80 Double Flange, 80mm ……………….30-8001 …………197 Slide Block 80 High Cycle Double …………………….30-8008HC …….197 Slide Block 80 High Cycle Single ……………………..30-8001HC …….197 Slide Pad 1.0″x2.0″ Top, Tapped ………………………30-1001 …………200 Slide Pad 1.0″x2.0″ Top, Tapped ………………………30-2000 …………200 Slide Pad 1.0″x2.0″, Tapped …………………………….30-1000 …………200 Slide Pad 1.5″x3.0″, High Cycle ……………………….30-1501 …………200 Slide Pad 1.5″x3.0″, High Cycle ……………………….30-3001 …………200 Slide Pad 1.5″x3.0″, Tapped …………………………….30-1500 …………200 Slide Pad 1.5″x3.0″, Tapped …………………………….30-3000 …………200 Slide Pad 28, 80mm ……………………………………….30-2800-2 ………200 Slide Pad 40, 300mm ……………………………………..30-4000-3 ………200 Slide Pad 40, 80mm ……………………………………….30-4000-2 ………200 Slide Pad 40, 80mm High-Cycle ………………………30-4000-6 ………200Sliding Door Guide Profile Sliding Door Guide 30/28 Lower …………….12-015 …………….56 Profile Sliding Door Guide 30/28 Upper …………….12-014 …………….56 Profile Sliding Door Guide 40 Lower …………………12-013 …………….56 Profile Sliding Door Guide 40 Upper …………………12-012 …………….56 Sliding Door Guides ……………………………………….23-054 …………..124Sliding Door Set Sliding Door Set …………………………………………….23-065 …………..123Standard Fastener Standard Fastener 1″, 1/4-20 …………………………..25-022 …………….76 Standard Fastener 1.5″, 5/16-18 ………………………25-003 …………….76 Standard Fastener 1.5″, 5/16-18 (SS) ……………….25-003SS ………..76 Standard Fastener 1.5″, S End, 5/16-18 ……………25-014 …………….76 Standard Fastener 20, M5 ………………………………20-021 …………….76 Standard Fastener 30/28, M8 ………………………….20-003 …………….76 Standard Fastener 30/28, M8 (SS) …………………..20-003SS ………..76 Standard Fastener 30/28, S End, M8x18 …………..20-143 …………….76 Standard Fastener 40, M8 ………………………………20-002 …………….76 Standard Fastener 40, M8 (SS) ……………………….20-002SS ………..76 Standard Fastener 40, S End, M8 …………………….20-144 …………….76T-Nut Double Economy 1.5″, 5/16-18, 0.5″ …………………25-046 …………….87 Double Economy 1.5″, 5/16-18, 0.88″ ……………….25-047 …………….87 Double Economy 1.5″, 5/16-18, 1.0″ …………………25-048 …………….87 Double Standard 1.5″, 5/16-18, 1.5″ …………………25-041 …………….84 Double Standard 30/40, M8, 24mm ………………….20-049 …………….84 Double Standard 30/40, M8, 40mm ………………….20-050 …………….84 Economy Compression Spring, M6 ………………….24-719-6 ………….86 Economy Compression Spring, M8 ………………….24-719-8 ………….86 Economy Offset 1.5″, #8-32 …………………………….25-045 …………….86 Economy Offset 30/28, 1/4-20 …………………………20-193 …………….86 Economy Offset 30/28, M6 ……………………………..20-190 …………….86 Economy Offset 40, 5/16-18 ……………………………20-182 …………….86 Economy Offset 40, M8 ………………………………….20-181 …………….86 Economy Standard 1.5″, #10-32 ………………………20-088 …………….86 Economy Standard 20, #10-24 ………………………..20-086 …………….86 Economy Standard 20, M5 ……………………………..20-085 …………….86 Economy Standard 30/28, 1/4-20 …………………….20-093 …………….86 Economy Standard 30/28, 5/16-18 …………………..20-092 …………….86 Economy Standard 30/28, M6 …………………………20-090 …………….86 Economy Standard 30/28, M6 (SS) ………………….20-090SS ………..86 Economy Standard 30/28, M8 …………………………20-091 …………….86 Economy Standard 40, 1/4-20 …………………………20-083 …………….86 Economy Standard 40, 5/16-18 ……………………….20-082 …………….86 Economy Standard 40, M6 ……………………………..20-080 …………….86 Economy Standard 40, M8 ……………………………..20-081 …………….86 Heavy Duty Double 1.5″, 1/4-20, 1.0″ ……………….25-052 …………….85 Heavy Duty Double 1.5″, 5/16-18, 1.5″ ……………..25-053 …………….85 Heavy Duty Double 40, M8 ……………………………..20-063 …………….85 Heavy Duty Retainer Spring ……………………………20-0614 …………..85 Heavy Duty Single 1.5″, 1/4-20 ………………………..25-050 …………….85 Heavy Duty Single 1.5″, 5/16-18 ………………………25-051 …………….85 Heavy Duty Single 40, M5……………………………….20-067 …………….85 Heavy Duty Single 40, M6……………………………….20-060 …………….85 Heavy Duty Single 40, M8……………………………….20-064 …………….85 Self Aligning 28/30/40, M5 ………………………………20-065 …………….84 Self Aligning 28/30/40, M6 ………………………………20-066 …………….84 Self Aligning 28/30/40, M8 ………………………………20-068 …………….84 Standard 20, M4 ……………………………………………20-044 …………….83 Standard 20, M5 ……………………………………………20-045 …………….83 Standard 28, 1/4-20 ……………………………………….25-055 …………….83 Standard 28, 5/16-18 ……………………………………..25-057 …………….83 Standard 28, M6 ……………………………………………20-055 …………….83 Standard 28, M8 ……………………………………………20-057 …………….83 Standard 30/40, M4 ……………………………………….20-051 …………….83 Standard 30/40, M5 ……………………………………….20-052 …………….83 Standard 30/40, M6 ……………………………………….20-056 …………….83 Standard 30/40, M6 (SS) ………………………………..20-056SS ………..83 Standard 30/40, M8 ……………………………………….20-058 …………….83 Standard 30/40, M8 (SS) ………………………………..20-058SS ………..83 Standard, 1.0″, #10-32 ……………………………………25-030 …………….83Description Part # Page #Description Part # Page #Topic 254 Industrial Profile SystemsIndexCatalog 1816-3/US 255Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA Index Standard, 1.0″, 1/4-20 …………………………………….25-031 …………….83 Standard, 30/40, #10-32 …………………………………25-009 …………….83 Standard, 30/40, 1/4-20 ………………………………….25-001 …………….83 Standard, 30/40, 5/16-18 ………………………………..25-002 …………….83 T-Slot Bar 40, Heavy Duty ……………………………….20-062 …………….85 T-Slot Bar 40/30 Standard ……………………………….20-059 …………….85Tooling/Jigs Drill Bit 6.8mm ……………………………………………….40-018 …………..239 Drilling Jig 28, Standard Connection …………………40-027 …………..237 Drilling Jig 30, Standard Connection …………………40-030 …………..237 Drilling Jig 40, Standard Connection …………………40-010 …………..237 Drilling Jig 40, Universal Connection ………………..40-015 …………..237 Drilling Jig 80, Standard Connection …………………40-011 …………..237 Drilling Jig, Clamp Profile 40×40 ………………………40-026 …………..238 Spanner Wrench, Adjustable for LR14 ………………40-017 …………..240 Spanner Wrench, Fixed, LR14 …………………………40-032-14 ………240 Spanner Wrench, Fixed, LR25 …………………………40-032-25 ………240 Spanner Wrench, Pin Socket for LR14 ……………..40-029 …………..240 Step Drill 7×20 with 3 Flats ……………………………..40-024 …………..238 Step Drill 7×20, #2 Morse Taper ……………………….40-023 …………..238 Step Drill 9×15 ……………………………………………….40-025 …………..238 Tap 5/16-18 …………………………………………………..40-516 …………..239 Tap M8x1.25 …………………………………………………40-016 …………..239 Wrench with T-Handle, 1/4″ ……………………………..40-046 …………..239 Wrench with T-Handle, 3/16″ ……………………………40-044 …………..239 Wrench with T-Handle, Hex 5 …………………………..40-012 …………..239 Wrench, Ball Headed 1/4″ ……………………………….40-048 …………..239 Wrench, Ball Headed 3/16″ ……………………………..40-047 …………..239 Wrench, Ball Headed Hex 5 …………………………….40-013 …………..239 Wrench, Ball Headed Hex 6 …………………………….40-022 …………..239UHMW Slides Slide Bar UHMW ……………………………………………12-400 …………….60 Slide Bar UHMW 40X10 ………………………………..12-420 …………….60 Slide Bar UHMW 28/30X8 ………………………………12-430 …………….60 Slide Strip UHMW ………………………………………….12-410 …………….60Universal Fastener Universal Fastener 1.0″, 1/4-20 ………………………..25-023 …………….78 Universal Fastener 1.5″, 5/16-18 ………………………25-004 …………….78 Universal Fastener 28 to 40 M6 ……………………….20-011 …………….78 Universal Fastener 28 Zinc Casting ………………….20-005Z1 …………78 Universal Fastener 28, M6 ………………………………20-005 …………….78 Universal Fastener 30, M6 ………………………………20-008 …………….78 Universal Fastener 40 Zinc Casting ………………….20-004Z1 …………78 Universal Fastener 40, M8 ………………………………20-004 …………….78Washers Washers (English) ………………………………………….25-7XX-X …………89 Washers (Metric) ……………………………………………24-7XX-X …………89Workstations Drawer 13.5″ H ………………………………………………22-122 …………..183 Drawer 6.75″ H ………………………………………………22-121 …………..183 Parts Bin Mounting Bracket, Angled …………………22-128Z3 ……….181 Parts Bin Mounting Bracket, Double Angle ………..22-128Z4 ……….181 Parts Bin Mounting Bracket, Flat ………………………22-128Z2 ……….181 Parts Bin Mounting Slide Rail ………………………….22-130 …………..182 Parts Bin Slide Collar ……………………………………..22-134 …………..182 Parts Bin, Polypropylene …………………………………22-126 …………..181 Parts Bin, Polypropylene …………………………………22-127 …………..181 Parts Bin, Polypropylene …………………………………22-128 …………..181 Parts Bin, Polypropylene …………………………………22-129 …………..181 Tool Runner, Straight ……………………………………..22-136 …………..183 Workstation Lift System Mounting Plate 50-703 …50-704 …………..184 Workstation Lift System Mounting Plate 50-700 …50-705 …………..185 Workstation Lift System, 2 Cylinder ………………….50-702 …………..184 Workstation Lift System, 4 Cylinder ………………….50-700 …………..185 Workstation Lift System, Telescopic Guide ………..50-703 …………..184Z-Nut Z-Nut 30/28, M3 …………………………………………….20-036 …………….87 Z-Nut 30/28, M4 …………………………………………….20-037 …………….87 Z-Nut 30/28, M5 …………………………………………….20-038 …………….87 Z-Nut 40, M3 …………………………………………………20-033 …………….87 Z-Nut 40, M4 …………………………………………………20-034 …………….87 Z-Nut 40, M5 …………………………………………………20-035 …………….87Description Part # Page #Description Part # Page #Topic 256Parker Hannifin CorporationIndustrial Profile SystemsWadsworth, Ohio USA The items described in this document and other documents or descriptions provided by Parker Hannifin Corporation, its subsidiaries and its authorized distributors are hereby offered for sale at prices to be established by Parker Hannifin Corporation, its subsidiaries and its authorized distributors. This offer and its acceptance by any customer (“Buyer”) shall be governed by all of the following Terms and Conditions. Buyer’s order for any items, when communicated to Parker Hannifin Corporation, its subsidiary or an authorized distributor (“Seller”) verbally or in writing, shall constitute acceptance of this offer.1. Terms and Conditions of Sale: All descriptions, quotations, proposals, offers acknowledgments, acceptances and sales of Seller’s products are subject to and shall be governed exclusively by the terms and conditions stated herein. Buyer’s acceptance of any offer to sell is limited to these terms and conditions. Any terms or conditions in addition to, or inconsistent with those stated herein, proposed by Buyer in any acceptance of an offer by Seller, are hereby objected to. No such additional, different or inconsistent terms and conditions shall become part of the contract between Buyer and Seller unless expressly accepted in writing by Seller. Seller’s acceptance of any offer to purchase by Buyer is expressly conditional upon Buyer’s assent to all the terms and conditions stated herein, including any terms in addition to, or inconsistent with those contained in Buyer’s offer. Acceptance of Seller’s products shall in all events constitute such assent. 2. Payment: Payment shall be made by Buyer net 30 days from the date of delivery of the items purchased hereunder. Amounts not timely paid shall bear interest at the maximum rate permitted by law for each month or portion thereof that the Buyer is late in making payment. Any claims by Buyer for omissions or shortages in a shipment shall be waived unless Seller receives notice thereof within 30 days after Buyer’s receipt of the shipment.3. Delivery: Unless otherwise provided on the face hereof, delivery shall be made F.O.B. Seller’s plant. Regardless of the method of delivery, however, risk of loss shall pass to Buyer upon Seller’s delivery to a carrier. Any delivery dates shown are approximate only and Seller shall have no liability for any delays in delivery.4. Warranty: Seller warrants that the items sold hereunder shall be free from defects in material or workmanship for a period of 24 months from date of shipment from Parker Hannifin Corporation. THIS WARRANTY COMPRISES THE SOLE AND ENTIRE WARRANTY PERTAINING TO ITEMS PROVIDED HEREUNDER. SELLER MAKES NO OTHER WARRANTY, GUARANTEE, OR REPRESENTATION OF ANY KIND WHATSOEVER. ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO, MERCHANTABILITY AND FITNESS FOR PURPOSE, WHETHER EXPRESS, IMPLIED, OR ARISING BY OPERATION OF LAW, TRADE USAGE, OR COURSE OF DEALING ARE HEREBY DISCLAIMED. NOTWITHSTANDING THE FOREGOING, THERE ARE NO WARRANTIES WHATSOEVER ON ITEMS BUILT OR ACQUIRED WHOLLY OR PARTIALLY, TO BUYER’S DESIGNS OR SPECIFICATIONS.5. Limitation of Remedy: SELLER’S LIABILITY ARISING FROM OR IN ANY WAY CONNECTED WITH THE ITEMS SOLD OR THIS CONTRACT SHALL BE LIMITED EXCLUSIVELY TO REPAIR OR REPLACEMENT OF THE ITEMS SOLD OR REFUND OF THE PURCHASE PRICE PAID BY BUYER, AT SELLER’S SOLE OPTION. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY KIND OR NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS ARISING FROM OR IN ANY WAY CONNECTED WITH THIS AGREEMENT OR ITEMS SOLD HEREUNDER, WHETHER ALLEGED TO ARISE FROM BREACH OF CONTRACT, EXPRESS OR IMPLIED WARRANTY, OR IN TORT, INCLUDING WITHOUT LIMITATION, NEGLIGENCE, FAILURE TO WARN OR STRICT LIABILITY.6. Changes, Reschedules and Cancellations: Buyers may request to modify the designs or specifications for the items sold hereunder as well as the quantities and delivery dates thereof, or may request to cancel all or part of this order, however, no such requested modification or cancellation shall become part of the contract between Buyer and Seller unless accepted by Seller in a written amendment to this Agreement. Acceptance of any such requested modification of cancellation shall be at Seller’s discretion, and shall be upon such terms and conditions as Seller may require. 7. Special Tooling: A tooling charge may be imposed for any special tooling, including without limitation, dies, fixtures, molds and patterns, acquired to manufacture items sold pursuant to this contract. Such special tooling shall be and remain Seller’s property notwithstanding payment of any charges by Buyer. In no event will Buyer acquire any interest in apparatus belonging to Seller which is utilized in the manufacture of the items sold hereunder, even if such apparatus has been specially converted or adapted for such manufacture and notwithstanding any charges paid by Buyer. Unless otherwise agreed, Seller shall have the right to alter, discard or otherwise dispose of any special tooling or other property in its sole discretion at any time.8. Buyer’s Property: Any designs, tools, patterns, materials, drawings, confidential information or equipment furnished by Buyer, or any other items which become Buyer’s property, may be considered obsolete and may be destroyed by Seller after two (2) consecutive years have elapsed without Buyer placing an order for the items which are manufactured using such property. Seller shall not be responsible for any loss or damage to such property while it is in Seller’s possession or control.9. Taxes: Unless otherwise indicated on the face hereof, all prices and charges are exclusive of excise, sales, use, property, occupational or like taxes which may be imposed by any taxing authority upon the manufacture, sale or delivery of the items sold hereunder. If any such taxes must be paid by Seller or if Seller is liable for the collection of such tax, the amount thereof shall be in addition to the amounts for the items sold. Buyer agrees to pay all such taxes or to reimburse Seller therefore upon receipt of its invoice. If Buyer claims exemption from any sales, use or other tax imposed by any taxing authority, Buyer shall save Seller harmless from and against any such tax, together with any interest or penalties thereon which may be assessed if the items are held to be taxable.10. Indemnity For Infringement of Intellectual Property Rights: Seller shall have no liability for infringement of any patents, trademarks, copyrights, trade dress, trade secrets or similar rights except as provided in this Part 10. Seller will defend and indemnify Buyer against allegations of infringement of U.S. patents, U.S. trademarks, copyrights, trade dress and trade secrets (hereinafter ‘Intellectual Property Rights’). Seller will defend at its expense and will pay the cost of any settlement or damages awarded in an action brought against Buyer based on an allegation that an item sold pursuant to this contract infringes the Intellectual Property Rights of a third party. Seller’s obligation to defend and indemnify Buyer is contingent on Buyer notifying Seller within ten (10) days after Buyer becomes aware of such allegations of infringement, and Seller having sole control over the defense of any allegations or actions including all negotiations for settlement or compromise. If an item sold hereunder is subject to a claim that it infringes the Intellectual Property Rights of a third party, Seller may, at its sole expense and option, procure for Buyer the right to continue using said item, replace or modify said item so as to make it noninfringing, or offer to accept return of said item and return the purchase price less a reasonable allowance for depreciation. Notwithstanding the foregoing, Seller shall have no liability for claims of infringement based on information provided by Buyer, or directed to items delivered hereunder for which the designs are specified in whole or part by Buyer, or infringements resulting from the modification, combination or use in a system of any item sold hereunder. The foregoing provisions of this Part 10 shall constitute Seller’s sole and exclusive liability and Buyer’s sole and exclusive remedy for infringement of Intellectual Property Right. If a claim is based on information provided by Buyer or if the design for an item delivered hereunder is specified in whole or in part by Buyer, Buyer shall defend and indemnify Seller for all costs, expenses or judgements resulting from any claim that such item infringes any patent, trademark, copyright, trade dress, trade secret or any similar right.11. Force Majeure: Seller does not assume the risk of and shall not be liable for delay or failure to perform any of Seller’s obligations by reason of circumstances beyond the reasonable control of Seller (hereinafter ‘Events of Force Majeure’). Events of Force Majeure shall include without limitation, accidents, acts of God, strikes or labor disputes, acts, laws, rules or regulations of any government or government agency, fires, floods, delays or failures in delivery of carriers or suppliers, shortages of materials and any other cause beyond Seller’s control.12. Entire Agreement/Governing Law: The terms and conditions set forth herein, together with any amendments, modifications and any different terms or conditions expressly accepted by Seller in writing, shall constitute the entire Agreement concerning the items sold, and there are no oral or other representations or agreements which pertain thereto. This Agreement shall be governed in all respects by the law of the State of Ohio. No actions arising out of the sale of the items sold hereunder of this Agreement may be brought by either party more than two (2) years after the cause of action accrues.9/91-POffer of Sale