A Pneumatics Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-1 www.parker.com/quickcouplings Pneumatic Quick Couplings Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-2 www.parker.com/quickcouplings A Pneumatics Single Shut-Off Couplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting air tools, hoses, or other implements to compressed air supplies. They are also used with other gases, and with the exception of the E-z-mate Series can be used with low pressure fluids. The coupler half contains a shut-off valve that is automatically opened when a mating nipple is inserted and automatically closes when the nipple is removed. Parker Single Shut-Off couplings come in three basic designs: general purpose/manual connect, general purpose/push-to-connect, and special purpose. The standard seal material for all Parker Single Shut-Off couplers is Nitrile. Ethylene Propylene, Fluorocarbon, and Neoprene seals are available as options. See the comprehensive Fluid Compatibility Chart that provides guidelines for seal and body material selection. When there is need for further assistance in selecting the appropriate seal material, please consult factory. Introduction Pneumatic Quick Couplings General Ordering Information When ordering Parker coupler bodies and nipples, please state the part number of each type of coupler body and each type of nipple desired. List coupler bodies and nipples as separate items rather than in combinations. Be sure to double check thread or hose sizes of items required. Many of Parker’s coupling products are available with unique non-standard options well suited to very specific applications. Examples of unusual end use applications might include: high temperatures (above 250° F), extremely caustic/corrosive solutions passing through the coupling, external/environmental corrosion situations, or other high wear and tear situations such as dragging the product along the ground. It is always recommended that the Quick Coupling Division be contacted with any questions concerning specific product application needs. Typically, a prefix or suffix is added to the base part number to specify a non-standard O-ring seal, or special option such as a sleeve lock. The list at right illustrates the designations. Please Note: Certain couplings series have additional “Special Order Information” which should be referred to in ordering those products. If applicable to the product, “Special Order Information” is found next to the Features and Specifications charts. See the Coupling Selection and Ordering Guide for further information. Checklist for Selecting Quick Couplings What are the functional requirements of the coupling? What is the maximum working pressure of the application? Which seals and body material are compatible with the system’s fluid? Is the application static or dynamic? What size coupler/hose is required? What is the maximum pressure drop suitable for the application? Does the application require the ability to connect and disconnect under pressure? What is the media temperature and ambient temperature? What end configurations are required? Is an industry interchange coupler required? Is air inclusion and fluid loss a concern in the application? Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-3 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics Table of Contents Introduction ……………………………………………………..A-2 Coupling Selection & Ordering Guide……………….A-4 Interchange Match-up Chart……………………………..A-5 Industrial Interchange Nipples ……………….A-6 to A-7 General Purpose Couplings Manual Connect…………………………………………….A-8 10 Series………………………………………………………..A-9 Couplers ……………………………………………………A-10 Nipples………………………………………………………A-11 20 Series………………………………………………………A-12 Couplers ……………………………………………………A-13 50 Series………………………………………………………A-14 Couplers ……………………………………………………A-14 Nipples………………………………………………………A-15 70 Series………………………………………………………A-16 Couplers ……………………………………………………A-16 Nipples………………………………………………………A-16 Push-to-Connect………………………………………….A-17 RF Series ……………………………………………………..A-18 Couplers ……………………………………………………A-19 Nipples………………………………………………………A-20 Tool-Mate Series ……………….See pages A-33 to A-36 HF Series …………………………………………………….A-21 Couplers – 1/8″…………………………………………..A-22 Nipples – 1/8″ …………………………………………….A-22 Couplers – 1/4″, 3/8″ & 1/2”………………………….A-23 HF Series Heavy Duty Couplers – 1/4″ & 3/8″ …..A-24 HA Series……………………………………………………..A-25 Couplers ……………………………………………………A-25 Nipples………………………………………………………A-15 Universal Coupler ………………………………………….A-26 Couplers ……………………………………………………A-26 30 Series …………………………………………..A-27 to A-30 Couplers ………………………………………..A-29 to A-30 Twist-Lock Couplings ……………………………………..A-31 Couplers ……………………………………………………A-32 Nipples………………………………………………………A-32 Special Purpose Couplings Standard – Non Marring Composite ……………..A-33 Tool-Mate Series Couplers ……………………………..A-34 Exhaust – Non Marring Composite……………….A-35 Tool-Mate Series Couplers ……………………………..A-36 Exhaust – Steel…………………………………………….A-37 E-z-mate Series …………………………………………….A-37 Couplers ……………………………………………………A-38 Accessories Blow Guns Controlled Pressure ……………………………………A-39 Full Pressure …………………………………………….A-39 BG Series …………………………………………………….A-40 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-4 www.parker.com/quickcouplings A Pneumatics Coupler Body Material* Locking Std. Seal** Std. Seal** Rated Style Interchange Size (in.) B SS S P Mechanism Material Temp Range Pressure General Purpose – Manual Connect 10 Series Manual Tru-Flate 1/4 to 1/2 Ball Nitrile -40° to +250° F 300 PSI 20 Series1 Manual Industrial 1/4 to 1/2 Ball Nitrile -40° to +250° F 300 PSI 50 Series Manual ARO 210 1/4 Ball Nitrile -40° to +250° F 300 PSI 70 Series Manual Lincoln 1/4 Ball Nitrile -40° to +250° F 300 PSI (long stem) General Purpose – Push-To-Connect RF Series Push to Connect Common 1/4 & 3/8 Ball Nitrile -40° to +250° F 300 PSI High-Flow European Interchange HF Series Push to Connect Industrial 1/82 Ball Nitrile -40° to +250° F 300 PSI to 1/2 30 Series Push to Connect Industrial 1/4 to 3/4 Pawl Nitrile -40° to +250° F 300 PSI HA Series Push to Connect ARO 210 1/4 Ball Nitrile -40° to +250° F 300 PSI Twist Lock Push to Connect Schrader 1/4 to 1/2 Cam Nitrile -40° to +250° F 300 PSI Universal Push to Connect Industrial 1/4 Ball Nitrile -40° to +250° F 150 PSI Tru-Flate ARO 210 Special Purpose – Push-To-Connect E-z-mate Series Exhaust/ Industrial 1/4 to 3/4 Ball Nitrile -40° to +250° F 300 PSI Push to Connect Tool-Mate Series Push to Connect/ Industrial & 1/4 to 1/2 3 Fingers Nitrile -40° to +250° F 300 PSI Exhaust & Std and RF Coupling Material Coupler • Prefix “B” for Brass – available for 3/8 & 1/2” body sizes only • Suffix “N” for Stainless Steel springs, locking balls and brass valves. (10, 20, 30, 50, and 70 series only) Nipple • Prefix “B” for Brass (Standard material is steel) 1 20 Series Stainless Steel available in 1/4” body. 2 1/8 “ couplings have no standard industry interface. 3 Tool-Mate metal end ports are Galvanized Steel. **Optional Seals Material Suffix TEMP Range Ethylene Propylene W -65° to +400° F Fluorocarbon Y -30° to +400° F Coupling Selection & Ordering Guide Pneumatic Quick Couplings *Material Code: B = Brass; SS = Stainless Steel; S = Steel; P= Plastic To select proper seal materials, see Fluid Compatibility Chart in Appendices section, or contact your Parker Quick Coupling Distributor. Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-5 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics Interchange Match-up Chart 10 Series (Tru-Flate Interchange) 1/2″ Body Size 3/4″ Body Size 3/8″ Body Size 1/4″ Body Size 1/2″ Body Size 3/8″ Body Size 1/4″ Body Size 1/4″ Body Size 20 Series, 30 Series, HF Series, E-z-mate (Industrial Interchange) 50 Series (ARO-210 Interchange) 70 Series (Lincoln Interchange) 1/4″ Body Size Twist-Lock (Schrader Interchange) 1/4″ Body Size 1/8″ HF Series 1/8″ Body Size RF Series 1/4″ Body Size Popular Coupling Designs Parker’s Quick Coupling Division manufactures quick couplings to interchange with popular designs that have become accepted standards in the industry today. The actual size nipple chart below can be used to help select Parker Quick Couplings that will interchange with specific nipple designs and sizes. 1/2″ Body Size 3/8″ Body Size Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-6 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics Industrial Interchange Nipples D E G F Female Pipe Thread Body Part Part Part No. Thread Dimensions (in.) Size No. No. Type 303 Size Overall Exposed Hex Largest Wt. (LB.) (in.) Brass Steel Stainless NPTF Length Length* Size Diameter P/Piece D E F G 1/4 – H1C – 1/8-27 1.48 0.71 0.50 0.58 0.03 1/4 BH3C H3C SH3C 1/4-18 1.56 0.80 0.62 0.72 0.05 1/4 – H3C-E SH3C-E 3/8-18 1.60 0.83 0.81 0.94 0.08 3/8 – H1E – 1/4-18 1.60 0.69 0.62 0.72 0.06 3/8 BH3E H3E – 3/8-18 1.69 0.74 0.81 0.94 0.10 3/8 – H3E-F – 1/2-14 1.84 0.90 1.00 1.16 0.13 1/2 – H1F – 3/8-18 2.03 0.79 0.81 0.94 0.12 1/2 BH3F H3F – 1/2-14 2.20 0.96 1.00 1.16 0.19 1/2 – H3F-G – 3/4-14 2.30 1.05 1.25 1.44 0.26 3/4 – H3G-F – 1/2-14 2.22 1.06 1.00 1.16 0.23 3/4 – H3G – 3/4-14 2.18 1.02 1.25 1.44 0.34 3/4 – H3G-J – 1-11 1/2 2.41 1.25 1.63 1.80 0.47 *This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker 20 Series coupler. Features • Parker Industrial Interchange nipples are for use with any Parker 20 Series, HF Series, 30 Series, Universal, HF or Ez- mate couplers. • Parker Industrial Interchange nipples are interchangeable with similar nipples manufactured by other quick coupling manufacturers conforming to A-A-59439 (formerly known as MIL-C-4109F), ANSI/(NFPA) T3.20.14-1990, or ISO6150-B requirements. • Hardened wear points** and solid barstock construction provide extended service life. • Precision machined surfaces and hardened load-bearing areas** resist the effects of mechanical shock in the most rugged applications. • The 20 Series, HF Series, 30 Series, Universal and E-z-mate couplers that mate with the Industrial Interchange nipples are located in their respective coupling “Type” (e.g. Manual Type) as noted in the Table of Contents. ** steel nipples only Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-7 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics Industrial Interchange Nipples Standard Hose Barb Push-Lok Hose Barb** D E G D E G Male Pipe Thread D E G F Body Part Part Part No. Thread Dimensions (in.) Size No. No. Type 303 Size Overall Exposed Hex Largest Wt. (LB.) (in.) Brass Steel Stainless NPTF Length Length* Size Diameter P/Piece D E F G 1/4 – H0C – 1/8-27 1.68 0.92 0.50 0.58 0.05 1/4 BH2C H2C SH2C 1/4-18 1.66 0.89 0.56 0.65 0.06 1/4 – H2C-E SH2C-E 3/8-18 1.90 1.14 0.69 0.80 0.07 3/8 – H00E – 1/8-27 1.68 0.73 0.62 0.72 0.08 3/8 – H0E – 1/4-18 1.90 0.95 0.62 0.72 0.08 3/8 BH2E H2E – 3/8-18 1.90 0.95 0.69 0.80 0.09 3/8 – H2E-F – 1/2-14 2.03 1.09 0.88 1.02 0.15 1/2 – H0F – 3/8-18 2.20 0.96 0.69 0.79 0.16 1/2 BH2F H2F – 1/2-14 2.35 1.09 0.88 1.01 0.18 1/2 – H2F-G – 3/4-14 2.40 1.16 1.06 1.22 0.24 3/4 – H2G-F – 1/2-14 2.32 1.16 1.00 1.16 0.22 3/4 BH2G H2G – 3/4-14 2.28 1.12 1.06 1.22 0.28 3/4 – H2G-J – 1-11 1/2 2.56 1.40 1.31 1.52 0.36 *This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker 20 Series coupler. Body Part Part Dimension (in.) Size No. No. Hose Overall Exposed Largest Wt. (LB.) (in.) Brass Steel I.D. Length Length* Diameter P/Piece D E G 1/4 BH8CP H8CP – 1/4 1.74 0.97 0.69 0.04 1/4 – H9CP – 3/8 1.96 1.19 0.86 0.05 3/8 – H4EP – 1/4 1.87 0.92 0.69 0.06 3/8 – H5EP – 3/8 2.02 1.07 0.86 0.07 3/8 – H6EP – 1/2 2.21 1.27 0.97 0.09 1/2 – H4FP – 3/8 2.36 1.11 0.86 0.11 1/2 – H5FP – 1/2 2.48 1.24 0.97 0.11 1/2 H6FP – 5/8 2.95 1.71 1.14 0.14 *This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker 20 Series coupler. **Push-Lok hose barbs are designed for use with Parker push-lok hose and do not require clamps. Body Part Part Part No. Dimension (in.) Size No. No. Type 303 Hose Overall Exposed Largest Wt. (LB.) (in.) Brass Steel Stainless I.D. Length Length* Diameter P/Piece D E G 1/4 – H8C – 1/4 1.72 0.95 0.46 0.04 1/4 – – SH8C 1/4 2.09 1.33 0.55 0.04 1/4 – H8C-D – 5/16 1.96 1.20 0.50 0.04 1/4 – H9C SH9C 3/8 1.96 1.20 0.50 0.05 3/8 – H5E – 3/8 1.85 .090 0.59 0.07 3/8 – H6E – 1/2 2.09 1.14 0.68 0.08 1/2 – H4F – 3/8 2.36 1.12 0.66 0.10 1/2 – H5F – 1/2 2.36 1.12 0.66 0.11 1/2 – H5F-G – 3/4 2.95 1.71 0.87 0.18 3/4 – H5G-F – 1/2 2.47 1.31 0.93 0.19 3/4 BH5G H5G – 3/4 3.00 1.84 0.93 0.25 3/4 – H5G-J – 1 3.24 2.08 1.24 0.36 * This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker 20 Series coupler. • This Grip-Ring sleeve enables the operator to connect or disconnect the coupling easily, even with greasy hands or while wearing heavy gloves. • Grip-Ring sleeves are available for all 10 and 20 Series couplers (only). To specify a model with a Grip-Ring sleeve, add the suffix letter “R” to the regular model number. Example: B13R. Caution: The Grip-Ring sleeve is subject to unintended disconnect if dragged on the end of a hose. Do not attempt to pull it over obstacles. • All sizes of 10, 20, 30, 50, and 70 Series couplers (only) can be furnished with Locking Sleeves, as illustrated. • Place suffix letters -“SL” (Sleeve-Lok) after regular catalog number. Example: B13-SL. 1 3 2 4 5 6 7 8 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-8 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics General Purpose – Manual Connect 10 Series, 20 Series, 50 Series, 70 Series Component Part Features for Manual Couplers, Series 10, 20, 50 & 70 Series Coupler Repair Kits for 10, 20, 30, 50, 70, & TL Series Body Seal Part Size Material No. 1/4 Nitrile 21K 1/4 Ethylene Propylene 21KW 1/4 Fluorocarbon 21KY 3/8 Nitrile 14K 3/8 Ethylene Propylene 14KW 3/8 Fluorocarbon 14KY 1/2 Nitrile 16K 1/2 Ethylene Propylene 16KW 1/2 Fluorocarbon 16KY 3/4 Nitrile 38K 3/4 Ethylene Propylene 38KW 3/4 Fluorocarbon 38KY Grip-Ring Sleeve – Features Sleeve-Lok – Features Accessories – Coupler Options 1. Precision machining, hardened wear points* and solid barstock construction provide long life even in rugged applications. 2. Tubular valve with large flow passages delivers high air flow with minimal pressure drop for efficient performance. The tubular design provides 360° support for both the valve seal and the mating nipple for long service life. 3. Precision molded seals form a “bubble tight” seal for reliable operation within rated working pressures. Standard seal material is Nitrile. Ethylene Propylene, Fluorocarbon and Neoprene seals are available as options. 4. Proven ball locking mechanism with large numbers of hardened steel or stainless steel locking balls evenly distribute the load to resist wear and provide positive connections. The ball locking mechanism also provides accurate alignment and allows a swiveling action to reduce hose torque. 5. Integral sleeve guard protects the sleeve and resists accidental disconnects by allowing the coupling to ride over obstructions without the sleeve being retracted. 6. Knurling and/or grooves on sleeve provide a gripping surface for ease of operation. 7. Wide range of body sizes, materials, options and end terminations are available to meet specific needs. Parker sleeve type couplings are available with male pipe thread, female pipe thread, standard hose barb, Push-Lok hose barb**, and reusable hose fitting ends. Standard body materials are brass in 1/4″ body size and steel in larger sizes. 8. Parker sleeve type couplings are available in interchanges for industrial interchange, Tru-flate, ARO 210 and Lincoln long stem design nipples. * Steel nipples only. ** Push-lok hose barbs are designed for use with Parker Push-lok hose and do not require clamps. Features • Parker 10 Series couplings are the original Tru-Flate design. • This unique design has been field proven as a long lasting, high performance coupling especially when used with pneumatic tools. • Standard seals are Nitrile. See the Coupling Selection and Ordering Information Guide at the beginning of Section A and the Fluid Compatibility Chart at the end of this catalog for optional materials. Specifications Body Size (in.) 1/4 3/8 1/2 Rated Pressure (PSI) 300 300 300 Temperature Range (Std. seals)* -40° to +250° F. Locking Device 4 balls 8 balls 8 balls Vacuum Data (inches Hg) Disconnected (coupler only) Not recommended Connected 27.4 27.4 27.4 * See Coupling Selection and Ordering Guide for Optional Seals See Coupling Repair Kits Table on introduction page to General Purpose – Manual Connect Couplers. Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-9 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics How to Order Information The standard 1/4″ 10 Series features a brass coupler with a steel valve. Larger sizes include an all steel construction with brass also available. To order a 3/8″ or 1/2″ coupler with a brass body and steel sleeve, add the prefix “B” to the steel part number, Example: B15. Add the suffix “N” as well as the “B” prefix to order an all brass coupler with stainless steel locking balls and springs, Example: B15N. All-brass couplings should be used to avoid corrosion from moisture. Consult factory for specific recommendations. Available with Sleeve-Lok (See Coupler Options). To order, add the suffix “-SL” to the part number, Example: 15-SL. Available for 1/4″ 10 Series couplers is a Grip-Ring Sleeve (See Coupler Options). To order add the suffix “R” to the part number, Example: B13R. General Purpose – Manual Connect 10 Series Performance Applications Sleeve type couplings are widely used to connect air lines and can also be used with low pressure fluids. Their compact and economical design uses a ball locking mechanism consisting of captive steel balls that engage the locking groove on the mating nipple. The sliding spring loaded sleeve on the coupler must be manually retracted in order to connect or disconnect the nipple. It is easy to do, but two hands are normally required. Common applications include: compressed air, water, grease, paint, limited vacuum and limited gases. 10 Series (1/4″, 3/8″, 1/2″ sizes) 0 20 40 60 80 100 120 140 160 0 5 10 15 20 Air Flow in SCFM 1/2″ 3/8″ 1/4″ Pressure Drop in PSID 100 PSI Inlet Pressure 80 PSI Inlet Pressure Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-10 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics Push-Lok Hose Barb* A B C General Purpose – Manual Connect 10 Series Male Pipe Thread Standard Hose Barb A C B A B C A B C Couplers Female Pipe Thread Body Part Part Thread Dimensions (in.) Size No. No. Size Overall Hex Largest Wt. (LB) (in.) Brass Steel NPTF Length Size Diameter P/Piece A B C 1/4 B13A – 1/8-27 1.83 0.75 0.90 0.19 1/4 B13 – 1/4-18 1.83 0.75 0.90 0.19 1/4 B13E – 3/8-18 1.95 0.81 0.94 0.31 3/8 – 15C 1/4-18 2.22 0.88 1.06 0.30 3/8 B15 15 3/8-18 2.28 0.88 1.06 0.34 3/8 – 15F 1/2-14 2.55 1.00 1.16 0.46 1/2 – 17E 3/8-18 2.74 1.00 1.19 0.46 1/2 B17 17 1/2-14 2.96 1.00 1.19 0.50 1/2 – 17G 3/4-14 3.19 1.25 1.44 0.20 Body Part Part Thread Dimensions (in.) Size No. No. Size Overall Hex Largest Wt. (LB) (in.) Brass Steel NPTF Length Size Diameter P/Piece A B C 1/4 B12A – 1/8-27 1.89 0.75 0.90 0.17 1/4 B12 – 1/4-18 2.05 0.75 0.90 0.18 1/4 B12E – 3/8-18 2.08 0.75 0.90 0.19 3/8 – 14C 1/4-18 2.36 0.88 1.06 0.26 3/8 B14 14 3/8-18 2.39 0.88 1.06 0.27 3/8 – 14F 1/2-14 2.55 0.88 1.06 0.28 1/2 – 16E 3/8-18 2.93 1.00 1.19 0.42 1/2 B16 16 1/2-14 3.08 1.00 1.19 0.45 1/2 – 16G 3/4-14 3.21 1.13 1.30 0.50 Body Part Part Dimensions (in.) Size No. No. Hose Overall Hex Largest Wt. (LB) (in.) Brass Steel I.D. Length Size Diameter P/Piece A B C 1/4 B10-3B – 1/4 2.49 0.75 0.90 0.18 1/4 B10-4B – 5/16 2.49 0.75 0.90 – 1/4 B10-5B – 3/8 2.49 0.75 0.90 0.18 3/8 – 14-5B 3/8 2.86 0.88 1.06 0.26 3/8 – 14-6B 1/2 3.08 0.88 1.06 0.27 1/2 – 16-5B 3/8 3.37 1.00 1.19 0.41 1/2 – 16-6B 1/2 3.62 1.00 1.19 0.43 1/2 – 16-7B 3/4 3.96 1.00 1.19 0.48 Body Part Part Dimensions (in.) Size No. No. Hose Overall Hex Largest Wt. (LB) (in.) Brass Steel I.D. Length Size Diameter P/Piece A B C 1/4 B10-3BP – 1/4 2.32 0.75 0.90 0.19 1/4 B10-5BP – 3/8 2.47 0.75 0.90 0.19 3/8 – 14-5BP 3/8 2.88 0.88 1.06 0.26 1/2 – 16-5BP 3/8 3.35 1.00 1.19 0.40 1/2 – 16-6BP 1/2 3.46 1.00 1.19 0.43 * Push-Lok hose barbs are designed for use with Parker Push-Lok hose and do not require clamps. Body Part Dimensions (in.) Size No. Hose Overall Exposed Largest Wt. (LB) (in.) Steel I.D. Length Length* Diameter P/Piece D E G 1/4 8C 1/4 1.63 .090 0.45 0.04 1/4 9C 3/8 2.00 1.27 0.55 0.05 3/8 5E 3/8 1.81 0.89 0.59 0.07 1/2 H4F 3/8 2.53 1.29 0.69 0.08 1/2 5F 1/2 2.81 1.60 0.81 0.11 1/2 H5F-G 3/4 3.16 1.91 0.94 0.18 * This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker 10 Series coupler. Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-11 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics General Purpose – Manual Connect 10 Series Male Pipe Thread Nipples Female Pipe Thread D E G F D E F G Standard Hose Barb Push-Lok Hose Barb** D E G D E G Body Part Part Part No. Thread Dimensions (in.) Size No. No. Type 303 Size Overall Exposed Hex Largest Wt. (LB) (in.) Brass Steel Stainless NPTF Length Length* Size Diameter P/Piece D E F G 1/4 – 0C – 1/8-27 1.47 0.74 0.50 0.58 0.04 1/4 B2C 2C S2C 1/4-18 1.62 0.89 0.56 0.65 0.06 1/4 – 2C-E – 3/8-18 1.72 0.99 0.69 0.80 0.05 3/8 – 0E – 1/4-18 1.88 0.95 0.62 0.72 0.08 3/8 – 2E – 3/8-18 1.90 0.98 0.69 0.80 0.09 1/2 – 0F – 3/8-18 2.33 1.12 0.69 0.79 0.13 1/2 – 2F – 1/2-14 2.48 1.27 0.88 1.01 0.17 1/2 – H2F-G – 3/4-14 2.53 1.29 1.13 1.30 0.24 * This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker 10 Series coupler. Body Part Part Thread Dimensions (in.) Size No. No. Size Overall Exposed Hex Largest Wt. (LB) (in.) Brass Steel NPTF Length Length* Size Diameter P/Piece D E F G 1/4 – 1C 1/8-27 1.28 0.55 0.50 0.58 0.05 1/4 B3C 3C 1/4-18 1.47 0.74 0.62 0.72 0.05 1/4 – 3C-E 3/8-18 1.50 0.77 0.81 0.94 0.07 3/8 – 1E 1/4-18 1.60 0.67 0.62 0.72 0.07 3/8 – 3E 3/8-18 1.68 0.77 0.81 0.94 0.10 1/2 – 1F 3/8-18 2.05 0.83 0.81 0.94 0.13 1/2 – 3F 1/2-14 2.27 1.05 1.00 1.16 0.18 1/2 – H3F-G 3/4-14 2.38 1.13 1.25 1.44 0.26 * This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker 10 Series coupler. Body Part Dimensions (in.) Size No. Hose Overall Exposed Largest Wt. (LB) (in.) Steel I.D. Length Length* Diameter P/Piece D E G 1/4 8CP 1/4 1.66 0.93 0.45 0.04 1/4 9CP 3/8 1.98 1.25 0.86 0.05 3/8 5EP 3/8 1.98 1.06 0.59 0.08 1/2 H4FP 3/8 2.52 1.27 0.86 0.11 1/2 H5FP 1/2 2.66 1.42 0.97 0.11 * This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker 10 Series coupler. ** Push-Lok hose barbs are designed for use with Parker Push-Lok hose and do not require clamps. Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-12 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics How to Order Information The standard 1/4″ 20 Series is a brass coupler with a steel valve. The larger sizes are an all steel construction with brass available as an option. To order a 3/8″ or 1/2″ body size coupler with a brass body and a steel sleeve and valve, add the prefix “B” to the steel part number. Example: B16. Add the suffix “N” as well as the “B” prefix to order an all brass coupler with stainless steel locking balls and springs, Example: B25N. All-brass couplings should be used to avoid corrosion from moisture. Consult factory for specific recommendations. Available with Sleeve-Lok (See Coupler Options at the beginning of Section A). To order, add “-SL” as a suffix to the part number, Example: 25-SL. Available for 1/4″ 20 Series couplers is a Grip-Ring sleeve (See Coupler Options). To order, add the suffix “R” to the part number, Example: B23R. Applications Sleeve type couplings are widely used to connect air lines and can also be used with low pressure fluids. Their compact and economical design uses a ball locking mechanism consisting of captive steel balls that engage the locking groove on the mating nipple. The sliding spring loaded sleeve on the coupler must be manually retracted in order to connect or disconnect the nipple. It is easy to do, but two hands are normally required. Common applications include: compressed air, water, grease, paint, limited vacuum and limited gases. General Purpose – Manual Connect 20 Series Industrial Interchange Features • Parker 20 Series sleeve type couplers accept industrial interchange nipples manufactured by Parker and other manufacturers. • Standard seals are Nitrile. See the Coupling Selection and Ordering Information Guide at the beginning of Section A and the Fluid Compatibility Chart at the end of this catalog for optional materials. Performance Specifications Body Size (in.) 1/4 3/8 1/2 Rated Pressure (psi) 300 300 300 Temperature Range (Std. seals)* -40° to +250° F. Locking Device 4 balls 8 balls 8 balls Vacuum Data (inches Hg) Disconnected (coupler only) Not recommended Connected 27.4 27.4 27.4 * See Coupling Selection and Ordering Guide for Optional Seals See Coupling Repair Kits Table on introduction page to General Purpose – Manual Connect Couplers 20 Series (1/4″, 3/8″, 1/2″ sizes) 0 20 40 60 80 100 120 140 160 0 5 10 15 20 Air Flow in SCFM 1/2″ 3/8″ 1/4″ Pressure Drop in PSID 100 PSI Inlet Pressure 80 PSI Inlet Pressure Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-13 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics Note: See Table of Contents for those nipples used with 20 Series couplers. Couplers Female Pipe Thread General Purpose – Manual Connect 20 Series Industrial Interchange A B C A B C Body Part Part Part No. Thread Dimension (in.) Size No. No. Type 303 Size Overall Hex Largest Wt. (LB) (in.) Brass Steel Stainless NPTF Length Size Diameter P/Piece A B C 1/4 B23A – – 1/8-27 1.83 0.75 0.90 0.20 1/4 B23 – S23 1/4-18 1.83 0.75 0.90 0.19 1/4 B23E – – 3/8-18 1.95 0.81 0.94 0.20 3/8 – 25C – 1/4-18 2.22 0.88 1.06 0.30 3/8 B25 25 – 3/8-18 2.28 0.88 1.06 0.32 3/8 – 25F – 1/2-14 2.55 1.00 1.16 0.34 1/2 – 17E – 3/8-18 2.74 1.00 1.19 0.46 1/2 B17 17 – 1/2-14 2.96 1.00 1.19 0.50 1/2 – 17G – 3/4-14 3.19 1.25 1.44 0.56 Male Pipe Thread Body Part Part Part No. Thread Dimension (in.) Size No. No. Type 303 Size Overall Hex Largest Wt. (LB) (in.) Brass Steel Stainless NPTF Length Size Diameter P/Piece A B C 1/4 B22A – – 1/8-27 1.89 0.75 0.90 0.18 1/4 B22 – S22 1/4-18 2.05 0.75 0.90 0.18 1/4 B22E – – 3/8-18 2.08 0.75 0.90 0.19 3/8 – 24C – 1/4-18 2.36 0.88 1.06 0.26 3/8 B24 24 – 3/8-18 2.39 0.88 1.06 0.29 3/8 – 24F – 1/2-14 2.55 0.88 1.06 0.29 1/2 – 16E – 3/8-18 2.93 1.00 1.19 0.42 1/2 B16 16 – 1/2-14 3.08 1.00 1.19 0.47 1/2 – 16G – 3/4-14 3.21 1.13 1.30 0.50 Standard Hose Barb Push-Lok Hose Barb* A B C B A C Body Part Part Dimensions (in.) Size No. No. Hose Overall Hex Largest Wt. (LB) (in.) Brass Steel I.D. Length Size Diameter P/Piece A B C 1/4 B20-3BP – 1/4 2.32 0.75 0.90 0.18 1/4 B20-5BP – 3/8 2.47 0.75 0.90 0.19 3/8 – 24-5BP 3/8 2.88 0.88 1.06 0.27 1/2 – 16-5BP 3/8 3.35 1.00 1.19 0.40 1/2 – 16-6BP 1/2 3.46 1.00 1.19 0.43 * Push-Lok hose barbs are designed for use with Parker Push-Lok hose and do not require clamps. Body Part Part Dimensions (in.) Size No. No. Hose Overall Hex Largest Wt. (LB) (in.) Brass Steel I.D. Length Size Diameter P/Piece A B C 1/4 B20-3B – 1/4 2.49 0.75 0.90 0.18 1/4 B20-4B – 5/16 2.49 0.75 0.90 0.18 1/4 B20-5B – 3/8 2.49 0.75 0.90 0.18 3/8 – 24-5B 3/8 2.86 0.88 1.06 0.27 3/8 – 24-6B 1/2 3.08 0.88 1.06 0.28 1/2 – 16-5B 3/8 3.37 1.00 1.19 0.41 1/2 – 16-6B 1/2 3.62 1.00 1.19 0.43 1/2 – 16-7B 3/4 3.96 1.00 1.19 0.48 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-14 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics Push-Lok Hose Barb* Body Part Dimensions (in.) Size No. Hose Overall Hex Largest Wt. (LB) (in.) Brass I.D. Length Size Diameter P/Piece A B C 1/4 B50-3BP 1/4 2.32 0.75 0.90 0.19 1/4 B50-5BP 3/8 2.47 0.75 0.90 0.20 * Push-Lok hose barbs are designed for use with Push-Lok hose and do not require clamps. Performance Features • Parker 50 Series couplings are interchangeable with ARO’s 210 series couplings. • 50 Series couplings have a full opening tubular valve for maximum flow and a built-in sleeve guard to minimize accidental disconnect. • 50 Series couplings have all brass bodies and steel valves. • Standard seal material is Nitrile. See the Coupling Selection and Ordering Information guide at the beginning of Section A and the Fluid Compatibility Chart at the end of this catalog for optional materials. • Push-to-Connect version available. See HA Series. Body Part Thread Dimensions (in.) Size No. Size Overall Hex Largest Wt. (LB) (in.) Brass NPTF Length Size Diameter P/Piece A B C 1/4 B52 1/4-18 2.05 0.75 0.90 0.20 1/4 B52E 3/8-18 2.08 0.75 0.90 0.21 A C B Male Pipe Thread Body Part Thread Dimensions (in.) Size No. Size Overall Hex Largest Wt. (LB) (in.) Brass NPTF Length Size Diameter P/Piece A B C 1/4 B53 1/4-18 1.83 0.75 0.90 0.20 1/4 B53E 3/8-18 1.95 0.81 0.94 0.21 Couplers Female Pipe Thread A C B A C B General Purpose – Manual Connect 50 Series Specifications Body Size (in.) 1/4 Rated Pressure (PSI) 300 Temperature Range (Std. seals)* -40° to +250° F. Locking Device 4 balls * See Coupling Selection and Ordering Guide for Optional Seals. See Coupling Repair Kits Table on introduction page to General Purpose – Manual Connect Couplers 50 Series (1/4″ size) 0 5 10 15 20 25 30 35 0 5 10 15 20 Air Flow in SCFM 1/4″ Pressure Drop in PSID 100 PSI Inlet Pressure 80 PSI Inlet Pressure Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-15 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics General Purpose – Manual Connect 50 Series Body Part Dimensions (in.) Size No. Hose Overall Exposed Largest Wt. (LB) (in.) Steel I.D. Length Length* Diameter P/Piece D E G 1/4 A8CP 1/4 1.65 0.87 0.67 0.03 * This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker 50 Series coupler. ** Push-Lok hose barbs are designed for use with Parker push-lok hose and do not require clamps. Standard Hose Barb Push-Lok Hose Barb** D E G D E G D E G F Male Pipe Thread Nipples Female Pipe Thread D E F G Body Part Thread Dimensions (in.) Size No. Size Overall Exposed Hex Largest Wt. (LB) (in.) Steel NPTF Length Length* Size Diameter P/Piece D E F G 1/4 A3C 1/4-18 1.47 0.66 0.62 0.72 0.04 * This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker 50 Series coupler. Body Part Thread Dimensions (in.) Size No. Size Overall Exposed Hex Largest Wt. (LB) (in.) Steel NPTF Length Length* Size Diameter P/Piece D E F G 1/4 A2C 1/4-18 1.62 0.82 0.56 0.65 0.05 * This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker 50 Series coupler. Body Part Dimensions (in.) Size No. Hose Overall Exposed Largest Wt. (LB) (in.) Steel I.D. Length Length* Diameter P/Piece D E G 1/4 A8C 1/4 1.63 0.85 .043 0.03 * This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker 50 Series coupler. Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-16 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics General Purpose – Manual Connect 70 Series Features • Parker 70 Series couplings are interchangeable with Lincoln’s “Long Stem” series couplings. • 70 Series couplings have a full opening tubular valve for maximum flow and a built-in sleeve guard to minimize accidental disconnect. • The 70 Series is only available in 1/4″ body size. • 70 Series couplings have all brass bodies and steel valves. • Standard seal material is Nitrile. See the Coupling Selection and Ordering Information Guide at the beginning of Section A and the Fluid Compatibility Chart at the end of this catalog for optional materials. Performance Specifications Body Size (in.) 1/4 Rated Pressure (psi) 300 Temperature Range (Std. seals)* -40° to +250° F. Locking Device 4 balls * See Coupling Selection and Ordering Guide for Optional Seals. See Coupling Repair Kits Table on introduction page to General Purpose – Manual Connect Couplers Couplers Female Pipe Thread A C B Body Part Thread Dimensions (in.) Size No. Size Overall Hex Largest Wt. (LB) (in.) Brass NPTF Length Size Diameter P/Piece A B C 1/4 B73 1/4-18 2.40 0.75 0.90 0.25 Body Part Thread Dimensions (in.) Size No. Size Overall Hex Largest Wt. (LB) (in.) Brass NPTF Length Size Diameter P/Piece A B C 1/4 B72 1/4-18 2.62 0.75 0.90 0.25 A B C Male Pipe Thread F G D E Nipples Female Pipe Thread Body Part Thread Dimensions (in.) Size No. Size Overall Exposed Hex Largest Wt. (LB) (in.) Steel NPTF Length Length* Size Diameter P/Piece D E F G 1/4 L3C 1/4-18 2.10 0.77 0.62 0.72 0.05 Male Pipe Thread D E F G Body Part Thread Dimensions (in.) Size No. Size Overall Exposed Hex Largest Wt. (LB) (in.) Steel NPTF Length Length* Size Diameter P/Piece D E F G 1/4 L2C 1/4-18 2.25 0.92 0.56 0.65 0.06 * This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker 70 Series coupler. 70 Series (1/4″ size) 0 5 10 15 20 25 30 35 0 5 10 15 20 Air Flow in SCFM 1/4″ Pressure Drop in PSID 100 PSI Inlet Pressure 80 PSI Inlet Pressure 7 2 3 4 5 6 8 1 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-17 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics General Purpose – Push-To-Connect RF, HF, HA, UC Series Component Part Features 1. Precision machining, hardened wear points* and solid bar stock construction provide long life even in rugged applications. 2. Tubular valve with large flow passages delivers high flow with minimum pressure drop for efficient performance. The tubular design provides 360° support for both the valve seal and the mating nipple for long service life. 3. Precision molded seals form a “bubble tight” seal for reliable operation within rated working pressures. Standard seal material is Nitrile. Ethylene Propylene, Fluorocarbon and Neoprene are available as options. See the Coupling Selection and Ordering Guide in the front of the Pneumatic Section of the catalog. 4. Proven ball locking mechanism with large numbers of hardened steel or stainless steel locking balls evenly distribute the load to resist wear and provide positive connections. The ball locking mechanism also provides accurate alignment and allows a swiveling action to reduce hose torque. 5. Integral sleeve guard protects the sleeve and resists accidental disconnects by allowing the coupling to ride over obstructions without the sleeve being retracted. 6. Knurling on the sleeve provides a gripping surface for ease of operation. 7. Wide range of end configurations are available to meet specific needs. Parker push-to-connect type couplings are available with male pipe thread, female pipe thread, standard hose barb, and Push-Lok hose barb**. 8. Parker 20, 30, HF, and E-z-mate Series couplings mate with industrial interchange design nipples. See Table of Contents for additional specifications. 9. Push-to-connect design permits one-handed connection when the coupler half is rigidly mounted. * steel nipples only ** Push-Lok hose barbs are designed for use with Parker Push-Lok hose and do not require clamps. Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-18 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics General Purpose – Push-To-Connect RF Series Features • Aerodynamic valve design. • Flow area of the RF nipple is up to 2-1/2 times larger than industrial interchange nipples. • Flow rates on 1/4” greater than many 3/8″ body size couplers. • Flow rates on 3/8” greater than many 1/2″ body size couplers. • Coupler sleeves are nickel-plated steel and coupler bodies are solid brass construction for excellent corrosion resistance. Standard RF nipples are manufactured from solid steel bar stock, case hardened and Chromium-6 Free plated . • Dependable ball locking mechanism allows a swiveling action to reduce hose torque. • Push-To-Connect design for easy one hand connection. • Integral sleeve guard to protect against accidental disconnection. • Wide range of port options available. • More efficient use of compressed air due to higher flows and reduced pressure drop. • RF Series interchanges with a common high-flow European interface. Port Configuration FP – Female Pipe MP – Male Pipe HB – Standard Hose Barb PL – Push-Lok Hose Barb Seal Options Blank – Nitrile F – Fluorocarbon E – Ethylene Propylene RF Series Port Size (1/16 of an inch) Body Size 25 – 1/4″ 37 – 3/8″ RF – 251 – 4 FP – * Unit 1 – Valved Coupler 4 – Unvalved Nipple Description The Parker RF Series pneumatic couplings offer the quality and dependability customers have come to expect from Parker’s line of pneumatic quick couplings. The RF Series has been designed to increase the flow through and reduce the pressure drop over the coupling. The nipple design has up to 2-1/2 times larger flow area than standard industrial interchange nipples. This, along with a specially designed coupler valve, allows tremendous flow through a coupling with an envelope size of current couplings in the market today. The benefits to the end user are increased tool efficiency and decreased air costs. Performance How To Order Specifications Body Size (in.) 1/4 3/8 Rated Pressure (psi) 300 300 Temperature Range (std seals) -40° to +250°F -40° to +250°F Locking Device 4 balls 8 balls Vacuum Data (inches Hg) Disconnected (coupler only) Not Recommended Not Recommended Connected Not Recommended Not Recommended RF Series (1/4″ & 3/8″ body size) with 1/4″ & 3/8″ Female NPSF 0 20 40 60 80 100 120 140 160 0 5 10 15 20 Air Flow in SCFM 3/8″ Body Size 3/8″ Female NPSF 1/4″ Body Size 3/8″ Female NPSF 1/4″ Body Size 1/4″ Female NPSF Pressure Drop in PSID 100 PSI Inlet Pressure 80 PSI Inlet Pressure Body NEW OLD Dimensions (in.) Size Part Part Hose Overall Hex Largest Wt. (LB) (in.) No. No. I.D. Length Size Diameter P/Piece A B C 1/4 RF-251-4PL CRFPL-4-4 1/4 2.64 0.81 0.99 0.26 1/4 RF-251-6PL CRFPL-4-6 3/8 2.78 0.81 0.99 0.27 1/4 RF-251-8PL CRFPL-4-8 1/2 2.93 0.81 0.99 0.28 3/8 RF-371-6PL – 3/8 3.02 0.94 1.07 0.33 3/8 RF-371-8PL – 1/2 3.02 0.94 1.07 0.33 Body NEW OLD Dimensions (in.) Size Part Part Hose Overall Hex Largest Wt. (LB) (in.) No. No. I.D. Length Size Diameter P/Piece A B C 1/4 RF-251-4HB CRFHB-4-4 1/4 2.81 0.81 0.99 0.26 1/4 RF-251-6HB CRFHB-4-6 3/8 2.81 0.81 0.99 0.27 3/8 RF-371-6HB – 3/8 3.02 0.94 1.07 0.31 3/8 RF-371-8HB – 1/2 3.02 0.94 1.07 0.34 Body NEW OLD Thread Dimensions (in.) Size Part Part Size Overall Hex Largest Wt. (LB) (in.) No. No. NPSF Length Size Diameter P/Piece A B C 1/4 RF-251-4FP CRF02-4-4 1/4-18 2.19 0.81 0.99 0.26 1/4 RF-251-6FP CRF02-4-6 3/8-18 2.34 0.81 0.99 0.27 3/8 RF-371-6FP – 3/8-18 2.33 0.94 1.07 0.31 3/8 RF-371-8FP – 1/2-14 2.49 1.00 1.07 0.35 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-19 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics General Purpose – Push-To-Connect RF Series Couplers Female Pipe Thread Male Pipe Thread Standard Hose Barb B A C Push-Lok Hose Barb B A C B A C B A C Body NEW OLD Thread Dimensions (in.) Size Part Part Size Overall Hex Largest Wt. (LB) (in.) No. No. NPTF Length Size Diameter P/Piece A B C 1/4 RF-251-4MP CRF01-4-4 1/4-18 2.34 0.81 0.99 0.24 1/4 RF-251-6MP CRF01-4-6 3/8-18 2.37 0.81 0.99 0.25 1/4 RF-251-8MP CRF01-4-8 1/2-14 2.56 0.88 0.99 0.29 3/8 RF-371-6MP – 3/8-18 2.52 0.94 1.07 0.30 3/8 RF-371-8MP – 1/2-14 2.68 0.94 1.07 0.33 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-20 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics Nipples Female Pipe Thread Male Pipe Thread Standard Hose Barb General Purpose – Push-To-Connect RF Series Push-Lok Hose Barb * This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker RF Series coupler. Body NEW OLD Thread Dimensions (in.) Size Part Part Size Overall Exposed* Hex Largest Wt. (LB) (in.) No. No. NPTF Length Length Size Diameter P/Piece D E F G 1/4 RF-254-4FP NRF02-4-4-S 1/4-18 1.45 0.68 0.62 0.72 0.06 1/4 RF-254-6FP NRF02-4-6-S 3/8-18 1.50 0.73 0.81 0.94 0.09 3/8 RF-374-6FP – 3/8-18 1.53 0.78 0.81 0.94 0.10 3/8 RF-374-8FP – 1/2-14 1.62 0.87 1.00 1.16 0.13 Body NEW OLD Thread Dimensions (in.) Size Part Part Size Overall Exposed* Hex Largest Wt. (LB) (in.) No. No. NPTF Length Length Size Diameter P/Piece D E F G 1/4 RF-254-4MP NRF01-4-4-S 1/4-18 1.60 0.83 0.56 0.65 0.05 1/4 RF-254-6MP NRF01-4-6-S 3/8-18 1.67 0.90 0.69 0.75 0.08 3/8 RF-374-6MP – 3/8-18 1.70 0.95 0.69 0.75 0.09 3/8 RF-374-8MP – 1/2-14 1.85 1.10 0.88 1.01 0.15 Body NEW OLD Dimensions (in.) Size Part Part Hose Overall Exposed* Largest Wt. (LB) (in.) No. No. I.D. Length Length Diameter P/Piece D E G 1/4 RF-254-4PL NRFPL-4-4-S 1/4 1.69 0.92 0.50 0.04 1/4 RF-254-6PL NRFPL-4-6-S 3/8 1.83 1.06 0.50 0.05 3/8 RF-374-6PL – 3/8 1.80 1.05 0.59 0.07 3/8 RF-374-8PL – 1/2 2.09 1.34 0.897 0.09 Body NEW OLD Dimensions (in.) Size Part Part Hose Overall Exposed* Largest Wt. (LB) (in.) No. No. I.D. Length Length Diameter P/Piece D E G 1/4 RF-254-4HB NRFHB-4-4-S 1/4 1.66 0.89 0.50 0.04 1/4 RF-254-6HB NRFHB-4-6-S 3/8 1.66 0.89 0.50 0.05 3/8 RF-374-6HB – 3/8 1.63 0.88 0.59 0.07 3/8 RF-374-8HB – 1/2 1.97 1.22 0.68 0.08 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-21 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics General Purpose – Push-To-Connect HF Series Industrial Interchange Features • Parker HF Series Pneumatic Quick Couplings offer an alternative to traditional industrial interchange couplers. The quality and durability you have come to expect from Parker 20 Series couplers, combined with a slim profile and pushto- connect design. The result is an easy to use general purpose pneumatic coupler suitable for use in a variety of applications. • Parker HF couplers feature sleeve guards** to protect against accidental disconnection. • Standard couplers feature solid brass construction, high flow valving, corrosion resistant valves, and stainless steel locking balls and valve spring. • Heavy Duty Couplers* featuring heat treated, solid steel bodies and sleeves for added strength and durability. • Parker HF couplers accept Industrial Interchange nipples*** manufactured by Parker and other manufacturers. See table of contents. *** 1/8″ couplings have no standard industry interface. ** 1/8″ couplings do not incorporate an integral sleeve guard. * 1/8” and 1/2” are unavailable in the Heavy Duty version. HF Series (1/8″ & 1/4″ sizes) 0 5 10 15 20 25 30 35 40 0 5 10 15 20 Air Flow in SCFM 1/4″ 1/8″ Pressure Drop in PSID 100 PSI Inlet Pressure 80 PSI Inlet Pressure Performance How To Order Port Configuration FP – Female Pipe MP – Male Pipe HB – Standard Hose Barb PL – Push-Lok Hose Barb HF Series Port Size (1/16 of an inch) Body Size 12 – 1/8″ 25 – 1/4″ 37 – 3/8″ 50 – 1/2″ HF – 251 – 4 FP – * – S Unit 1 – Valved Coupler 4 – Unvalved Nipple Heavy Duty Steel Coupler Seal Options Blank – Nitrile F – Fluorocarbon E – Ethylene Propylene Specifications Body Size (in.) 1/8 1/4 3/8 1/2 Rated Pressure (psi) 250 300 300 300 Temperature Range (Std. seals) -40° to +250°F Locking Device 5 balls 4 balls 6 balls 8 balls Vacuum Data (inches Hg) Disconnected (coupler only) Not Recommended Connected — 27.4 27.4 27.4 HF Series (3/8″ & 1/2″ sizes) 0 20 40 60 80 100 120 140 160 180 200 220 0 5 10 15 20 Air Flow in SCFM 1/2″ 3/8″ Pressure Drop in PSID 100 PSI Inlet Pressure 80 PSI Inlet Pressure D E G F Body New Old Thread Dimensions (in.) Size Part No. Part No. Size Overall Exposed Hex Largest Wt. (LB) (in.) Brass Brass NPTF Length Length* Size Diameter P/Piece D E F G 1/8 HF-124-2FP HF702F-2 1/8-27 1.08 0.55 0.50 0.58 0.03 1/8 HF-124-4FP HF702F-4 1/4-18 1.34 0.81 0.67 0.78 0.07 * This dimension represents the portion that is exposed when nipple is inserted in a Parker HF series coupler. Body New Old Thread Dimensions (in.) Size Part No. Part No. Size Overall Hex Largest Wt. (LB) (in.) Brass Brass NPTF Length Size Diameter P/Piece A B C 1/8 HF-121-2FP HF302F-2 1/8-27 1.42 0.55 0.63 0.06 1/8 HF-121-4FP HF302F-4 1/4-18 1.81 0.67 0.63 0.10 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-22 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics General Purpose – Push-To-Connect HF Series Industrial Interchange Male Pipe Thread F G D E 1/8″ Body Size Nipples Female Pipe Thread 1/8″ Body Size Couplers Female Pipe Thread Male Pipe Thread A C B A C B Body New Old Thread Dimensions (in.) Size Part No. Part No. Size Overall Hex Largest Wt. (LB) (in.) Brass Brass NPTF Length Size Diameter P/Piece A B C 1/8 HF-121-2MP HF302M-2 1/8-27 1.50 0.55 0.63 0.06 1/8 HF-121-4MP HF302M-4 1/4-18 1.61 0.55 0.63 0.07 Body New Old Thread Dimensions (in.) Size Part No. Part No. Size Overall Exposed Hex Largest Wt. (LB) (in.) Brass Brass NPTF Length Length* Size Diameter P/Piece D E F G 1/8 HF-124-2MP HF702M-2 1/8-27 1.06 0.53 0.44 0.51 0.03 1/8 HF-124-4MP HF702M-4 1/4-18 1.25 0.72 0.56 0.63 0.05 * This dimension represents the portion that is exposed when nipple is inserted in a Parker HF series coupler. Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-23 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics 1/4”, 3/8”, & 1/2” Body Size Couplers Female Pipe Thread Male Pipe Thread Push-Lok Hose Barb B A C Standard Hose Barb B A C General Purpose – Push-To-Connect HF Series Industrial Interchange B A C B A C Body New Old Thread Dimensions (in.) Size Part No. Part No. Size Overall Hex Largest Wt. (LB) (in.) Brass Brass NPTF Length Size Diameter P/Piece A B C 1/4 HF-251-4MP HF304M-4 1/4-18 2.34 0.81 0.99 0.25 1/4 HF-251-6MP HF304M-6 3/8-18 2.37 0.81 0.99 0.26 3/8 HF-371-4MP HF306M-4 1/4-18 2.49 0.94 1.07 0.32 3/8 HF-371-6MP HF306M-6 3/8-18 2.52 0.94 1.07 0.30 3/8 HF-371-8MP HF306M-8 1/2-14 2.68 0.94 1.07 0.33 1/2 HF-501-8MP – 1/2-14 3.48 1.06 1.19 0.57 Body New Old Dimensions (in.) Size Part No. Part No. Hose Overall Hex Largest Wt. (LB) (in.) Brass Brass I.D. Length Size Diameter P/Piece A B C 1/4 HF-251-4HB HF304HB-4 1/4 2.81 0.81 0.99 0.26 1/4 HF-251-6HB HF304HB-6 3/8 2.81 0.81 0.99 0.27 3/8 HF-371-6HB HF306HB-6 3/8 3.02 0.94 1.07 0.31 3/8 HF-371-8HB HF306HB-8 1/2 3.02 0.94 1.07 0.34 Body New Old Dimensions (in.) Size Part No. Part No. Hose Overall Hex Largest Wt. (LB) (in.) Brass Brass I.D. Length Size DiameterP/Piece A B C 1/4 HF-251-4PL HF304PL-4 1/4 2.64 0.81 0.99 0.26 1/4 HF-251-6PL HF304PL-6 3/8 2.78 0.81 0.99 0.27 3/8 HF-371-6PL HF306PL-6 3/8 3.02 0.94 1.07 0.33 3/8 HF-371-8PL HF306PL-8 1/2 3.07 0.94 1.07 0.31 Body New Old Thread Dimensions (in.) Size Part No. Part No. Size Overall Hex Largest Wt. (LB) (in.) Brass Brass NPSF Length Size Diameter P/Piece A B C 1/4 HF-251-4FP HF304F-4 1/4-18 2.19 0.81 0.99 0.26 1/4 HF-251-6FP HF304F-6 3/8-18 2.34 0.81 0.99 0.27 3/8 HF-371-4FP HF306F-4 1/4-18 2.33 0.94 1.07 0.33 3/8 HF-371-6FP HF306F-6 3/8-18 2.33 0.94 1.07 0.31 3/8 HF-371-8FP HF306F-8 1/2-14 2.49 1.00 1.07 0.35 1/2 HF-501-8FP – 1/2-14 3.35 1.06 1.19 0.60 Body New Old Dimensions (in.) Size Part No. Part No. Hose Overall Hex Largest Wt. (LB) (in.) Steel Steel I.D. Length Size Diameter P/Piece A B C 1/4 HF-251-4PL-S HF404PL-4 1/4 2.64 0.81 0.99 0.26 1/4 HF-251-6PL-S HF404PL-6 3/8 2.78 0.81 0.99 0.27 3/8 HF-371-6PL-S HF406PL-6 3/8 3.02 0.94 1.07 0.33 3/8 HF-371-8PL-S HF406PL-8 1/2 3.07 0.94 1.07 0.31 Body New Old Dimensions (in.) Size Part No. Part No. Hose Overall Hex Largest Wt. (LB) (in.) Steel Steel I.D. Length Size Diameter P/Piece A B C 1/4 HF-251-4HB-S HF404HB-4 1/4 2.81 0.81 0.99 0.26 1/4 HF-251-6HB-S HF404HB-6 3/8 2.81 0.81 0.99 0.27 3/8 HF-371-6HB-S HF406HB-6 3/8 3.02 0.94 1.07 0.31 3/8 HF-371-8HB-S HF406HB-8 1/2 3.02 0.94 1.07 0.34 Body New Old Thread Dimensions (in.) Size Part No. Part No. Size Overall Hex Largest Wt. (LB) (in.) Steel Steel NPTF Length Size Diameter P/Piece A B C 1/4 HF-251-4MP-S HF404M-4 1/4-18 2.34 0.81 0.99 0.25 1/4 HF-251-6MP-S HF404M-6 3/8-18 2.37 0.81 0.99 0.26 3/8 HF-371-4MP-S HF406M-4 1/4-18 2.49 0.94 1.07 0.32 3/8 HF-371-6MP-S HF406M-6 3/8-18 2.52 0.94 1.07 0.30 3/8 HF-371-8MP-S HF406M-8 1/2-14 2.68 0.94 1.07 0.33 Body New Old Thread Dimensions (in.) Size Part No. Part No. Size Overall Hex Largest Wt. (LB) (in.) Steel Steel NPSF Length Size Diameter P/Piece A B C 1/4 HF-251-4FP-S HF404F-4 1/4-18 2.19 0.81 0.99 0.26 1/4 HF-251-6FP-S HF404F-6 3/8-18 2.34 0.81 0.99 0.27 3/8 HF-371-4FP-S HF406F-4 1/4-18 2.33 0.94 1.07 0.33 3/8 HF-371-6FP-S HF406F-6 3/8-18 2.33 0.94 1.07 0.31 3/8 HF-371-8FP-S HF406F-8 1/2-14 2.49 1.00 1.07 0.35 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-24 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics Heavy Duty Couplers Female Pipe Thread Male Pipe Thread Push-Lok Hose Barb B A C Standard Hose Barb B A C General Purpose – Push-To-Connect HF Series Industrial Interchange B A C B A C Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-25 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics General Purpose – Push-To-Connect HA Series Features • Parker HA Series couplings are interchangeable with ARO’s 210 series couplings. See Table of Contents. • Push to Connect design for easy one hand operation. • HA Series couplings utilize a tubular valve for maximum flow and a built-in sleeve guard to minimize accidental disconnect. • The HA Series is only available in 1/4″ body size. • HA Series couplings have all brass bodies. • Standard seal material is Nitrile. See the Coupling Selection and Ordering Information Guide at the beginning of Section A and the Fluid Compatibility Chart at the end of this catalog for optional materials. • Other port options available – contact the division. • Formerly the 50A Series. HA Series (1/4″ size) 0 5 10 15 20 25 30 35 40 45 0 5 10 15 20 Air Flow in SCFM 1/4″ Pressure Drop in PSID Performance Couplers Female Pipe Thread Male Pipe Thread A C B A C B How To Order Port Configuration FP – Female Pipe MP – Male Pipe HA Series Port Size (1/16 of an inch) Body Size 25 – 1/4″ HA – 251 – 4FP – * Unit 1 – Valved Coupler Seal Options Blank – Nitrile F – Fluorocarbon E – Ethylene Propylene Body NEW OLD Thread Dimensions (in.) Size Part No. Part No. Size Overall Hex Largest Wt. (LB) (in.) Brass Brass NPSF Length Size Diameter P/Piece A B C 1/4 HA-251-4FP C50A02-4-4 1/4-18 2.11 0.81 1.01 0.26 Body NEW OLD Thread Dimensions (in.) Size Part No. Part No. Size Overall Hex Largest Wt. (LB) (in.) Brass Brass NPSF Length Size Diameter P/Piece A B C 1/4 HA-251-4MP C50A01-4-4 1/4-18 2.26 0.81 1.01 0.24 Specifications Body Size (in.) 1/4 Rated Pressure (psi) 300 Temperature Range (Std. seals) -40° to +250° F Locking Device 4 balls Vacuum Service Not Recommended * See page A-15 for Nipples Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-26 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics General Purpose – Push-To-Connect UC Series Features • The 1/4″ UC Series Coupler will accept the industrial interchange, [(MIL-C-4109F) and (ANSI/(NFPA) T3.20.14- 1990)], 10 Series (Tru-Flate) and the 50 series (ARO 210) style nipples. • The coupler features automatic push-to-connect operation, high flow machined “window valve,” corrosion resistant solid brass construction and a sleeve guard which helps prevent accidental disconnects and protects the sleeve from damage. • While the best quick coupling performance is obtained by matching like series couplers and nipples, the universal coupler permits multiple series nipples to mate with one coupler. Performance UC Series Coupler (1/4″ size) 0 5 10 15 20 25 30 35 0 5 10 15 20 Air Flow in SCFM 1/4″ Pressure Drop in PSID 100 PSI Inlet Pressure 80 PSI Inlet Pressure Male Pipe Thread C A B Couplers Female Pipe Thread C A B Contact the Division for Hose Barb and Push-Lok port availability Specifications Body Size (in.) 1/4 Rated Pressure (PSI) 150 Temperature Range (Nitrile seal) -40° to +250° F. Locking Device 4 balls Vacuum Service Not Recommended Body New Old Thread Dimensions (in.) Size Part No. Part No. Size Overall Hex Largest Wt. (LB) (in.) Brass Brass NPTF Length Size Diameter P/Piece A B C 1/4 UC-251-4MP UC304M-4 1/4-18 2.21 0.81 0.98 0.22 1/4 UC-251-6MP UC304M-6 3/8-18 2.24 0.81 0.90 0.23 Port Configuration FP – Female Pipe MP – Male Pipe HB – Standard Hose Barb* PL – Push-Lok Hose Barb* UC Series Port Size (1/16 of an inch) Body Size 25 – 1/4″ UC – 251 – 4 FP – * Unit 1 – Valved Coupler * Contact the Division for availability Seal Options Blank – Nitrile F – Fluorocarbon E – Ethylene Propylene How to Order Body New Old Thread Dimensions (in.) Size Part No. Pat No. Size Overall Hex Largest Wt. (LB) (in.) Brass Brass NPSF Length Size Diameter P/Piece A B C 1/4 UC-251-4FP UC304F-4 1/4-18 2.06 0.81 0.98 0.23 1/4 UC-251-6FP UC304F-6 3/8-18 2.21 0.81 0.98 0.23 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-27 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics 6 4 5 2 3 7 General Purpose – Push-To-Connect 30 Series Industrial Interchange 8 1 Component Part Features 1. Precision machining, hardened wear points* and solid bar stock construction provide long life even in rugged applications. 2. Tubular valve with large flow passages delivers high flow with minimum pressure drop for efficient performance. The tubular design provides 360° support for both the valve seal and the mating nipple for long service life. 3. Precision molded seals form a “bubble tight” seal for reliable operation within rated working pressures. Standard seal material is Nitrile. Ethylene Propylene, Fluorocarbon and Neoprene are available as options. 4. Locking pawls (pins) constructed of stainless steel create a durable locking mechanism that provides alignment and evenly distributes loads. 5. Push-to-connect design permits one-handed connection when the coupler half is rigidly mounted. 6. Knurling on the sleeve provides a gripping surface for ease of operation. 7. Wide range of end terminations are available to meet specific needs. Parker push type couplings are available with male pipe thread, female pipe thread, standard hose barb, and Push-Lok hose barb**. 8. Parker 30 Series couplings mate with industrial interchange design nipples. See Table of Contents. * steel nipples only ** Push-Lok hose barbs are designed for use with Parker Push-Lok hose and do not require clamps. Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-28 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics Repair Kits Body Seal Part Size Material No. 1/4 Nitrile 21K 1/4 Ethylene Propylene 21KW 1/4 Fluorocarbon 21KY 3/8 Nitrile 14K 3/8 Ethylene Propylene 14KW 3/8 Fluorocarbon 14KY 1/2 Nitrile 16K 1/2 Ethylene Propylene 16KW 1/2 Fluorocarbon 16KY 3/4 Nitrile 38K 3/4 Ethylene Propylene 38KW 3/4 Fluorocarbon 38KY Performance 30 Series (1/2″ & 3/4″ sizes) 0 20 40 60 80 100 120 140 160 180 200 220 0 5 10 15 20 Air Flow in SCFM 3/4″ 1/2″ Pressure Drop in PSID 100 PSI Inlet Pressure 80 PSI Inlet Pressure How to Order Information Available with Sleeve-Lok (See Coupler Options Section). To order, add the suffix “-SL” to part number, Example: B33-SL. Brass valves are available for extra corrosion resistance. To specify a brass valve, add the suffix “N” to the regular part number. Example: B33N. A brass valve should be used for corrosive applications where steel parts are not suitable. Consult the factory for specific recommendations. Features • Parker 30 Series couplers are designed for rigid mounting that allows a simple push-to-connect operation. • Constructed of a solid brass body and a steel valve, 30 Series couplers are noted for their high flow capability, reliability and rugged design. • Parker 30 Series couplers accept industrial interchange nipples manufactured by Parker and other manufacturers. • Standard seal material is Nitrile. See Ordering Information at the beginning of Section A and the Fluid Compatibility Chart at the end of this catalog for optional materials. Operation Push type couplings feature one handed “automatic” connection by pushing the nipple into the coupler–provided the coupler half is firmly mounted. The locking mechanism of Parker 30 Series couplers consists of pawls (or pins) which act directly on the sleeve, thereby causing the sleeve to automatically retract when the mating nipple is inserted. Sleeve must be manually retracted to remove the nipple. 30 Series couplings are push type Single Shut-Off couplings. General Purpose – Push-To-Connect 30 Series Industrial Interchange Specifications Body Size (in.) 1/4 3/8 1/2 3/4 Rated Pressure (PSI) 300 300 300 300 Temperature Range (Std. seals)* -40° to +250° F. Locking Device 3 pawls 4 pawls 5 pawls 6 pawls Vacuum Data (inches Hg) Disconnected (coupler only) Not recommended Connected 27.4 27.4 27.4 27.4 * See Coupling Selection and Ordering Guide for Optional Seals. 30 Series (1/4″ & 3/8″ sizes) 0 10 20 30 40 50 60 70 0 5 10 15 20 Air Flow in SCFM 3/8″ 1/4″ Pressure Drop in PSID 100 PSI Inlet Pressure 80 PSI Inlet Pressure Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-29 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics General Purpose – Push-To-Connect 30 Series Industrial Interchange Couplers Female Pipe Thread Male Pipe Thread A C B B C A Body Part Thread Dimensions (in.) Size No. Size Overall Hex Largest Wt. (LB) (in.) Brass NPTF Length Size Diameter P/Piece A B C 1/4 B32A 1/8-27 2.03 0.75 1.20 0.27 1/4 B32 1/4-18 2.18 0.75 1.20 0.28 1/4 B32E 3/8-18 2.18 0.75 1.20 0.28 3/8 B34C 1/4-18 2.38 0.88 1.39 0.36 3/8 B34 3/8-18 2.44 0.88 1.39 0.39 3/8 B34F 1/2-14 2.57 0.88 1.39 0.41 1/2 B36E 3/8-18 2.92 1.00 1.52 0.58 1/2 B36 1/2-14 3.09 1.00 1.52 0.61 1/2 B36G 3/4-14 3.12 1.13 1.52 0.67 3/4 B38 3/4-14 2.95 1.31 1.90 0.91 3/4 B38J 1-11 1/2 3.12 1.31 1.90 0.99 Body Part Thread Dimensions (in.) Size No. Size Overall Hex Largest Wt. (LB) (in.) Brass NPTF Length Size Diameter P/Piece A B C 1/4 B33A 1/8-27 1.96 0.75 1.20 0.30 1/4 B33 1/4-18 1.96 0.75 1.20 0.28 1/4 B33E 3/8-18 2.03 0.81 1.20 0.30 3/8 B35C 1/4-18 2.26 0.88 1.39 0.42 3/8 B35 3/8-18 2.33 0.88 1.39 0.42 3/8 B35F 1/2-14 2.57 1.00 1.39 0.46 1/2 B37E 3/8-18 2.76 1.00 1.52 0.56 1/2 B37 1/2-14 3.00 1.00 1.52 0.66 1/2 B37G 3/4-14 3.12 1.25 1.52 0.73 3/4 B39F 1/2-14 2.85 1.31 1.90 0.15 3/4 B39 3/4-14 2.99 1.31 1.90 1.10 3/4 B39J 1-11 1/2 3.18 1.63 1.90 1.24 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-30 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics General Purpose – Push-To-Connect 30 Series Industrial Interchange Couplers Standard Hose Barb Push-Lok Hose Barb* A C B B C A Body Part Dimensions (in.) Size No. Hose Overall Hex Largest Wt. (LB) (in.) Brass I.D. Length Size Diameter P/Piece A B C 1/4 B30-3B 1/4 2.62 0.75 1.20 0.27 1/4 B30-4B 5/16 2.62 0.75 1.20 0.27 1/4 B30-5B 3/8 2.62 0.75 1.20 0.28 3/8 B34-5B 3/8 2.85 0.88 1.39 0.39 3/8 B34-6B 1/2 2.85 0.88 1.39 0.41 1/2 B36-6B 1/2 3.33 1.00 1.52 0.59 1/2 B36-7B 3/4 3.86 1.00 1.52 0.65 3/4 B38-7B 3/4 3.69 1.31 1.90 0.93 3/4 B38-8B 1 3.93 1.31 1.90 1.03 Body Part Dimensions (in.) Size No. Hose Overall Hex Largest Wt. (LB) (in.) Brass I.D. Length Size Diameter P/Piece A B C 1/4 B30-3BP 1/4 2.45 0.75 1.20 0.27 1/4 B30-5BP 3/8 2.60 0.75 1.20 0.29 3/8 B34-5BP 3/8 2.82 0.88 1.39 0.40 1/2 B36-6BP 1/2 3.46 1.00 1.52 0.56 * Push-Lok hose barbs are designed for use with Parker Push-Lok hose and do not require clamps. Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-31 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics General Purpose – Push-To-Connect Twist-Lock Features • Push-to-Connect design for easy one hand operation. • A variety of port configurations are available to meet specific needs. • Standard Seals are Nitrile. • Zinc bodies with Chromium-6 Free plated steel sleeves and nipples. • Interchanges with Schrader Twist-Lock style couplings. Performance Twist-Lock Series (1/4″ size) 0 5 10 15 20 25 30 35 0 5 10 15 20 Air Flow in SCFM 1/4″ Pressure Drop in PSID 100 PSI Inlet Pressure 80 PSI Inlet Pressure Specification Body Size (in.) 1/4 1/2 Rated Pressure (PSI) 300 300 Temperature Range (Nitrile seal) -40° F to +250° F. Locking Device CAM Vacuum Service Not Recommended Port Configuration FP – Female Pipe MP – Male Pipe HB – Standard Hose Barb PL – Push-Lok Hose Barb TL Series Port Size (1/16 of an inch) Body Size 25 – 1/4″ 50 – 1/2″ T L – 2 5 1 – 4 F P Unit 1 – Valved Coupler 4 – Unvalved Nipple How To Order Operation • Engineered for speedy coupling and uncoupling. To lock – push in; to unlock – give the coupler sleeve a 1/8 turn. Designed to protect against accidental uncoupling. Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-32 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics Body NEW OLD Thread Dimensions (in.) Size Part No. Part No. Size Overall Hex Largest Wt. (LB) (in.) Steel Steel NPT Length Size Diameter P/Piece A B C 1/4 TL-251-4FP 8052-0319 1/4-18 2.01 0.75 1.12 0.21 1/2 TL-501-6FP 1095-0040 3/8-18 2.55 1.13 1.50 0.44 1/2 TL-501-8FP 1461-0070 1/2-14 2.78 1.13 1.50 0.44 1/2 TL-501-12FP 1462-0040 3/4-14 2.91 1.13 1.50 0.44 Body NEW OLD Thread Dimensions (in.) Size Part No. Part No. Size Overall Hex Largest Wt. (LB) (in.) Steel Steel NPT Length Size Diameter P/Piece A B C 1/4 TL-251-4MP 3060-0109 1/4-18 2.23 0.75 1.12 0.21 1/4 TL-251-6MP 3061-0109 3/8-18 2.26 0.75 1.12 0.22 1/2 TL-501-6MP 3080-0020 3/8-18 2.71 1.13 1.50 0.39 1/2 TL-501-8MP 3081-0020 1/2-14 2.88 1.13 1.50 0.40 Body NEW OLD Thread Dimensions (in.) Size Part No. Part No. Size Overall Hex Largest Wt. (LB) (in.) Steel Steel NPT Length Size Diameter P/Piece D E F 1/4 TL-254-2FP 2047-0010 1/8-27 1.53 0.56 0.65 0.04 1/4 TL-254-4FP 8278-0050 1/4-18 1.81 0.69 .79 0.07 1/2 TL-504-4FP 1261-0020 1/4-18 1.68 0.69 0.80 0.14 1/2 TL-504-6FP 1096-0010 3/8-18 1.84 0.88 1.01 0.14 General Purpose – Push-To-Connect Twist-Lock Couplers Female Thread Nipples Female Thread Male Thread B A C Male Thread D F E D F E B A C Standard Hose Barb D F Body NEW OLD Thread Dimensions (in.) Size Part No. Part No. Size Overall Hex Largest Wt. (LB) (in.) Steel Steel NPT Length Size Diameter P/Piece D E F 1/4 TL-254-2MP 8051-0010 1/8-27 1.65 0.56 0.65 0.05 1/4 TL-254-4MP 8050-0110 1/4-18 1.75 0.56 0.65 0.05 1/2 TL-504-4MP 8624-0070 1/4-18 1.87 0.69 0.80 0.12 1/2 TL-504-6MP 1095-0020 3/8-18 1.93 0.69 0.80 0.12 1/2 TL-504-8MP 1461-0050 1/2-14 2.16 0.88 1.01 0.13 1/2 TL-504-12MP 1462-0100 3/4-14 2.16 1.06 1.22 0.14 Body NEW OLD Thread Dimensions (in.) Size Part No. Part No. Size Overall Largest Wt. (LB) (in.) Steel Steel NPT Length Diameter P/Piece D F 1/4 TL-254-4HB 8787-0040 1/4 1.83 0.50 0.04 1/4 TL-254-6HB 8788-0030 3/8 1.83 0.50 0.06 1/2 TL-504-4HB 2123-0030 1/4 2.31 0.80 0.10 1/2 TL-504-6HB 1097-0010 3/8 2.28 0.69 0.11 1/2 TL-504-8HB 1098-0010 1/2 2.28 0.81 0.12 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-33 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics Features • Standard style Tool-Mate couplers are lightweight, easy to operate, and non-marring with easy, push-to-connect action. • Couplers are constructed of Polyamide material; springs, balls, and pins are stainless steel; and locking fingers are made of polyacetate. • PBH Tool-Mate Series is built to the Industrial Interchange profile identifiable with a Yellow ring around the body. • PER Tool-Mate Series is designed to use with Parker’s high flow RF Series nipples and is indentifiable with a Green ring around the body. • Grey body designates standard non-venting style coupler. Operation • Push-to-Connect design for easy one hand operation. • Pull in the direction of the arrow indicated on the body of the coupler to release the nipple. Specifications Body Size 1/4” 3/8” Rated Pressure 300 300 Temperature Range (°F) 0 to 160 0 to 160 Vacuum Service Not Recommended Tool-Mate Series Standard (1/4î & 3/8” sizes) 0 10 20 30 40 50 60 70 0 5 10 15 20 3/8″ PBH 1/4″ PER 1/4″ PBH Pressure Drop in PSID 100 PSI Inlet Pressure Air Flow in SCFM Special Purpose – Standard – Non Marring Tool-Mate Series Performance Port Size (1/16 of an inch) 4 – 1/4î 6 – 3/8” 8 – 1/2” Tool-Mate Series (Non-venting) PBH – Industrial Interchange PER – RF Interchange Unit 1 – Valved Coupler Port Configuration FP – Female Pipe MP – Male Pipe Body Size 25 – 1/4” 37 – 3/8” PBH – 251 – 4 FP How To Order Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-34 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics A C B Industrial Interchange Female Pipe Thread Male Pipe Thread RF Interchange Female Pipe Thread Male Pipe Thread 1/4″ 1/4″ 3/8″ 3/8″ 3/8″ PBH-251-4FP PBH-251-6FP PBH-371-4FP PBH-371-6FP PBH-371-8FP 1/4-18 3/8-18 1/4-18 3/8-18 1/2-14 2.60 2.67 2.95 2.95 3.17 0.67 0.91 0.67 0.83 0.99 1.19 0.13 1.19 0.15 1.38 0.21 1.38 0.20 1.38 0.22 A B C Body Size (in.) Part No. Thread Size NPTF Overall Length Largest Diameter Wt. (LB) P/Piece Body Size (in.) Part No. Thread Size NPTF Overall Length Largest Diameter Wt. (LB) P/Piece Body Size (in.) Part No. Thread Size NPTF Overall Length Largest Diameter Wt. (LB) P/Piece Body Size (in.) Part No. Thread Size NPTF Overall Length Largest Diameter Wt. (LB) P/Piece 1/4″ 1/4″ 3/8″ 3/8″ PBH-251-4MP PBH-251-6MP PBH-371-4MP PBH-371-6MP 1/4-18 3/8-18 1/4-18 3/8-18 2.97 2.99 3.39 3.39 0.67 0.91 0.83 0.83 1.19 0.14 1.19 0.19 1.38 0.23 1.38 0.23 1/4″ 1/4″ PER-251-4FP PER-251-6FP 1/4-18 3/8-18 2.83 2.83 0.83 0.83 1.25 0.17 1.25 0.15 PER-251-4MP PER-251-6MP 1/4-18 3/8-18 2.36 2.40 0.83 0.83 1.25 0.19 1.25 0.18 1/4″ 1/4″ Special Purpose – Standard – Non Marring Tool-Mate Series A C B A C B A B C Hex Size A B C Hex Size A B C Hex Size A B C Hex Size Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-35 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics Body Size 1/4” 3/8” 1/2” Rated Pressure 300 300 300 Temperature Range (°F) 0 to 160 0 to 160 0 to 160 Vacuum Service Not Recommended Tool-Mate Series Exhaust (1/4”, 3/8” & 1/2” sizes) 0 20 40 60 80 100 120 140 160 180 0 5 10 15 20 Air Flow in SCFM 1/2″ PBS 3/8″ PBS 1/4″ PES 1/4″ PBS Pressure Drop in PSID 100 PSI Inlet Pressure Features • Exhaust style Tool-Mate couplers are lightweight, easy to operate, and non-marring with easy, push-to-connect action and one-handed disconnection. • Couplers are constructed of black Polyamide material; springs, balls, and pins are stainless steel in the PES series and 1/2″ PBS series; and locking fingers in the PBS series are made of polyacetate. End ports are galvanized steel. • PBS Tool-Mate Series is built to the Industrial Interchange profile identifiable with a Yellow ring around the body. • PES Tool-Mate Series is designed for use with high flow RF Series nipples and is identifiable with a Green ring around the body. • Exhaust style Tool-Mate couplers meet the ISO 4414 specification to allow trapped air pressure to be vented prior to disconnection. • Black body designates exhaust style coupler. Operation • Push-to-Connect design for easy one hand operation. • Pull the body in the direction of the arrow marked 1, this will safely vent the downstream pressure. • Push the body in the direction of arrow 2 to disconnect at 0 pressure. Special Purpose – Exhaust – Non Marring Tool-Mate Series How To Order Performance Specifications Port Size (1/16 of an inch) 4 – 1/4” 6 – 3/8” 8 – 1/2” 12 – 3/4” Tool-Mate Series (Exhaust) PBS – Industrial Interchange PES – RF Interchange Unit 1 – Valved Coupler Port Configuration FP – Female Pipe MP – Male Pipe Body Size 25 – 1/4” 37 – 3/8” 50 – 1/2” PBS – 251 – 4 FP Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-36 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics A C B Special Purpose – Exhaust – Non Marring Tool-Mate Series Exhaust Industrial Interchange Female Pipe Thread Male Pipe Thread Exhaust RF Interchange Female Pipe Thread Male Pipe Thread A B C Body Size (in.) Part No Thread Size NPTF Overall Length Hex Size Largest Diameter Wt. (LB) P/Piece PBS-251-4FP PBS-251-6FP PBS-371-6FP PBS-371-8FP PBS-501-6FP PBS-501-8FP PBS-501-12FP 1/4-18 3/8-18 3/8-18 1/2-14 3/8-18 1/2-14 3/4-14 2.60 2.67 2.95 3.17 3.25 3.36 3.66 0 .67 0.91 0.82 0.99 1.18 1.18 1.18 1.19 1.19 1.38 1.38 1.62 1.62 1.62 1/4″ 1/4″ 3/8″ 3/8″ 1/2″ 1/2″ 1/2″ A C B A C B Body Size (in.) Part No. Thread Size NPTF Overall Length Largest Diameter Wt. (LB) P/Piece PBS-251-4MP PBS-251-6MP PBS-371-6MP PBS-371-8MP PBS-501-8MP 1/4-18 3/8-18 3/8-18 1/2-18 1/2-18 2.97 2.99 3.39 3.39 3.70 0.67 0.91 0.82 0.91 1.18 1.19 1.19 1.38 1.38 1.62 1/4″ 1/4″ 3/8″ 3/8″ 1/2″ Body Size (in.) Part No. Thread Size NPTF Overall Length Largest Diameter Wt. (LB) P/Piece PES-251-6FP 3/8-18 2.83 0.83 1.25 0.15 0.19 1/4″ Body Size (in.) Part No. Thread Size NPTF Overall Length Largest Diameter Wt. (LB) P/Piece 1/4″ PES-251-4MP 1/4-18 2.36 0.83 1.25 0.13 0.15 0.20 0.22 0.50 0.50 0.50 0.14 0.19 0.23 0.28 0.50 A B C A B C Hex Size A B C Hex Size A B C Hex Size Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-37 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics Special Purpose – Exhaust – Steel E-z-mate Series Industrial Interchange Features • Parker’s E-z-mate is an exhaust type coupler that is designed to exhaust air pressure prior to the disconnection process. • The valve sleeve acts as an integral shut-off valve that allows connection and disconnection at zero pressure. When the sleeve is moved to shut off air flow, it automatically vents downstream allowing for disconnection at zero pressure and eliminating the risk of “hose whip.” • Meets ISO 4414 requirements for a controlled pressure release system. • Built-in sleeve-lok mechanically locks the valve sleeve to help prevent accidental disconnects. • Proven ball locking mechanism evenly distributes load to resist wear and provide positive connections. The ball locking mechanism also provides accurate alignment and allows a swiveling action to reduce hose torque. • O-ring interface seal assures “bubble tight” seal and long service life. • E-z-mate Series couplers use industrial interchange nipples. • Brass versions available. Contact the division for availability. Operation Parker E-z-mate couplings combine push-to-connect, exhaust-style action with a self-locking valve sleeve to guard against accidental disconnection. Simply follow the direction of the On-Off arrow stamped on the valve sleeve. It’s that easy. To connect, push the nipple into the coupler. The black locking sleeve automatically slides forward securely locking the nipple in place. No air is allowed to flow through the coupling at this point. The valve sleeve is then rotated clockwise (when viewed from the coupler port end) to open flow and automatically engage the sleeve-lock mechanism. To disconnect, rotate the valve sleeve counter clockwise (when viewed from the coupler end). The flow of air through the coupling will be shut off and all downstream air is vented to the atmosphere. The locking sleeve may now be retracted and the nipple removed. Lubricate sleeve as part of periodic maintenance to coupler. E-z-mate Series (1/2″ & 3/4″ sizes) 0 20 40 60 80 100 120 140 160 180 200 220 240 0 5 10 15 20 Air Flow in SCFM 3/4″ 1/2″ Pressure Drop in PSID 100 PSI Inlet Pressure 80 PSI Inlet Pressure Performance How To Order Port Configuration FP – Female Pipe MP – Male Pipe HB – Standard Hose Barb PL – Push-Lok Hose Barb E-z-mate Series Port Size (1/16 of an inch) Body Size 25 – 1/4″ 37 – 3/8″ 50 – 1/2″ 75 – 3/4″ EZ – 251 – 4 FP Unit 1 – Valved Coupler 4 – Unvalved Nipple Body Size (in.) 1/4 3/8 1/2 3/4 Rated Pressure (PSI) 300 300 300 300 Temperature Range (std seals) -40° to +250° F. Locking Device 4 balls 4 balls 6 balls 8 balls Force required to Connect (lbs) Less than 10 Vacuum Service Not recommended Specifications E-z-mate Series (1/4″ & 3/8″ sizes) 0 10 20 30 40 50 60 70 80 0 5 10 15 20 Air Flow in SCFM 1/4″ 3/8″ Pressure Drop in PSID 100 PSI Inlet Pressure 80 PSI Inlet Pressure Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-38 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics Couplers Female Pipe Thread Special Purpose – Exhaust – Steel E-z-mate Series Industrial Interchange Note: See Table of Contents for Industrial Interchange nipples used with E-z-mate Series couplers. Male Pipe Thread Standard Hose Barb C A B ON OFF C A B ON OFF C A B ON OFF C A B ON OFF * Push-Lok hose barbs are designed for use with Parker Push-Lok hose and do not require clamps. Body New Old Thread Dimensions (in.) Size Part No. Part No. Size Overall Hex Largest Wt. (LB) (in.) Steel Steel NPTF Length Size Diameter P/Piece A B C 1/4 EZ-251-4FP EZ304F-4T 1/4-18 2.25 0.75 1.00 0.25 1/4 EZ-251-6FP EZ304F-6T 3/8-18 2.68 0.88 1.01 0.29 3/8 EZ-371-6FP EZ306F-6T 3/8-18 2.53 0.88 1.18 0.38 3/8 EZ-371-8FP EZ306F-8T 1/2-14 3.00 1.12 1.30 0.50 1/2 EZ-501-8FP EZ308F-8T 1/2-14 3.01 1.12 1.38 0.65 1/2 EZ-501-12FP EZ308F-12T 3/4-14 3.44 1.38 1.59 0.70 3/4 EZ-751-12FP EZ312F-12T 3/4-14 3.01 1.38 1.57 0.76 3/4 EZ-751-16FP EZ312F-16T 1-11 1/2 3.52 1.56 1.80 0.92 Body New Part Thread Dimensions (in.) Size Part No. No. Size Overall Hex Largest Wt. (LB) (in.) Steel Steel NPTF Length Size Diameter P/Piece A B C 1/4 EZ-251-4MP EZ304M-4T 1/4-18 2.85 0.75 1.00 0.30 1/4 EZ-251-6MP EZ304M-6T 3/8-18 2.87 0.75 1.00 0.31 3/8 EZ-371-6MP EZ306M-6T 3/8-18 3.10 0.88 1.18 0.44 1/2 EZ-501-8MP EZ308M-8T 1/2-14 3.62 1.12 1.38 0.73 3/4 EZ-751-12MP EZ312M-12T 3/4-14 4.04 1.38 1.57 0.90 Body New Old Dimensions (in.) Size Part No. Part No. Hose Overall Hex Largest Wt. (LB) (in.) Steel Steel I.D. Length Size Diameter P/Piece A B C 1/4 EZ-251-4HB EZ304HB-4T 1/4 3.20 0.75 1.00 0.28 1/4 EZ-251-6HB EZ304HB-6T 3/8 3.20 0.75 1.00 0.29 3/8 EZ-371-6HB EZ306HB-6T 3/8 3.43 0.88 1.18 0.42 1/2 EZ-501-8HB EZ308HB-8T 1/2 4.06 1.12 1.40 0.70 Body New Old Dimensions (in.) Size Part No. Part No. Hose Overall Hex Largest Wt. (LB) (in.) Steel Steel I.D. Length Size Diameter P/Piece A B C 1/4 EZ-251-4PL EZ304PL-4T 1/4 3.03 0.75 1.00 0.28 1/4 EZ-251-6PL EZ304PL-6T 3/8 3.18 0.75 1.00 0.29 3/8 EZ-371-6PL EZ306PL-6T 3/8 3.38 0.88 1.18 0.42 1/2 EZ-501-8PL EZ308PL-8T 1/2 3.91 1.12 1.38 0.70 Push-Lok Hose Barb* Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-39 www.parker.com/quickcouplings Pneumatic Quick Couplings A Pneumatics Accessories Blow Guns (Controlled Pressure) Description 410-S – Parker Controlled Pressure Blow Guns features thumb lever valve actuator and brass nozzle. Inlet port is 1/4″ NPT. 410-SV – Parker Venturi Nozzle Controlled Pressure Blow Gun with thumb lever valve and large venturi side ports for high volume flow. Inlet port is 1/4″ NPT. 415-S – Parker Controlled Pressure Blow Guns features push button valve actuator and brass nozzle. Inlet port is 1/4″ NPT. The following Parker Blow Guns must have a pressure regulator setting below 30 psi to conform to OSHA safety requirements 29 CFR 1910.242 Paragraph b. Accessories Blow Guns (Full Pressure) Description 410 – Parker two way thumb lever valve has an zinc body with 1/4″ NPT inlet and 1/8″ NPSF outlet. Note: Standard Gun without nozzle. 410-N – Parker thumb lever style Blow Gun features a zinc body, brass nozzle, and 1/4″ NPT female inlet. 415-N – Parker Blow Gun features a push button style actuator, zinc body with a brass nozzle and 1/4″ NPT female inlet. Specifications Part Maximum Wt. (LB) No. Pressure P/Piece 410-S 150 PSI. 0.50 410-SV 150 PSI 0.53 415-S 150 PSI 0.48 Features • Parker Controlled Pressure Blow Guns meet OSHA requirements (section 29 CFR 1910.242 paragraph b), and directive #100-1. “Compressed air shall not be used for cleaning purposes except where reduced to less than 30 psi, and then only with effective chip guarding and personal protective equipment.” • Parker Controlled Pressure Blow Guns have a black epoxy coated zinc body and vented nozzles to prevent pressure build-up when dead ending occurs up to 150 psi. Part Maximum Wt. (LB) No. Pressure P/Piece 410 150 PSI 0.48 410-N 150 PSI 0.51 415-N 150 PSI 0.49 Part No. 400-S-TIP Blow Gun Replacement Tip Specifications Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 A-40 www.parker.com/quickcouplings Pneumatic Quick Couplings Accessories BG Series Features • Easy to control variable flow pistol grip trigger. • Nozzles available that meet OSHA requirements. • Lightweight ergonomical design. • Bodies are constructed of impact resistant plastic. How to Order BG Part Number: BG 442 – SBL BG Series Blow Gun Color BL – Black Meets OSHA Requirement S – Yes N- No Nozzle Style 41 – Extended 42 – Extended (Meets OSHA Requirement) 43 – 1/8″ FNPT 44 – Short (Meets OSHA Requirement) Inlet Port in 16ths Description Made from impact resistant plastic, BG Series blow guns are durable and versatile. Extended nozzles allow air to be directed where it is required. The pistol grip trigger allows greater control over the amount of air delivered. Combined, these two features provide superior performance in a light weight, ergonomically designed package. Nozzles are available in short and extended versions and most models meet OSHA directives on the use of compressed air for cleaning purposes. OSHA directive #100-1 states that “when dead ending occurs a static pressure at the main orifice shall not exceed 30 psi.” For those blow guns that do not meet this requirement, OSHA requires that “compressed air shall not be used for cleaning purposes except where reduced to less than 30 psi, and then only with effective chip guarding and personal protective equipment” (section 29 CFR 1910.242 paragraph b). Please refer to the blow gun descriptions below for compatibility with OSHA directive #100-1. Nozzle configurations are designed for maximum flexibility. Applications with special requirements may find the BG443- NBL with a 1/8″ NPT fitting convenient for adapting existing nozzles or extra-long extensions. For information on specials or made-to-order blow gun nozzles, please contact the Quick Coupling Division. Specifications Rated Pressure (PSI) 175 psi Temperature Range to 120° F Inlet Port 1/4” NPTF Part Meets OSHA Number Nozzle Requirements BG441-NBL Extended No Part Meets OSHA Number Nozzle Requirements BG442-SBL Extended Yes Part Meets OSHA Number Nozzle Requirements BG443-NBL 1/8” Female NPT No Part Meets OSHA Number Nozzle Requirements BG444-SBL Vortec Yes B Hydraulics Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-1 www.parker.com/quickcouplings Hydraulic Quick Couplings Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-2 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics Introduction Double Shut-Off and Straight-Thru Couplings Parker hydraulic couplings have a wide variety of designs, each tailored to a particular application or use. This catalog is arranged according to those categories. In each section the construction of a specific design will be detailed. However, based on the valving of the coupling, hydraulic couplings generally fall into one of two groups, either Double Shut-Off or Straight-Thru. Double Shut-Off couplings are used extensively when it is important to minimize fluid loss upon disconnection. Both halves of the coupler, the body and the nipple, contain shutoff valves. These valves open automatically when the body and nipple are connected, and close automatically when the two halves are disconnected—keeping fluid loss to a minimum. Parker Straight-Thru couplings have no valves in either half and are ideal for maximum flow application. Their smooth, open bore offers the lowest pressure drop of any quick disconnect coupling, and allows them to be thoroughly cleaned. Since there are no valves in either half, fluid flow should be shut off before the coupling is disconnected. Rated Pressure Rated pressure for the Parker hydraulic couplings range from 30 to 15,000 psi, depending on the coupling series, size and materials. Rated pressures as shown in this catalog are defined by ISO 5598, as “the qualified operating pressures which are recommended for a component or a system by the manufacturer.” Parker “Rated Pressures” have been established on the basis of laboratory tests which include, but are not limited to, static burst tests and multiple cycle impulse tests. System characteristics such as high cycling rates and high amplitude shocks either hydraulic or mechanical, can reduce the functioning life of a coupling, even if the system’s nominal pressure falls within the rated pressure range of the coupling. For assistance in analyzing your application, contact your nearest Parker sales office or the Quick Coupling Division in Minneapolis. Refer to the Safety Guide at the end of this catalog for considerations when selecting a Quick Coupling. Refer to the Fluid Compatibility Chart (note Table of Contents) for seal selection assistance for both Double Shut-Off and Straight-Thru couplings. Checklist for Selecting Quick Couplings What are the functional requirements of the coupling? What is the maximum working pressure of the application? Which seals and body material are compatible with the system’s fluid? Is the application static or dynamic? What size coupler is required? What is the maximum pressure drop suitable for the application? Does the application require the ability to connect and disconnect under pressure? What is the media temperature and ambient temperature? What end configurations are required? Is an industry interchange coupler required? Is air inclusion and fluid loss a concern in the application? Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-3 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics Table of Contents Introduction …………………………………………………….B-2 Coupling Selection Guide………………………………..B-4 General Purpose Couplings 60 Series …………………………………………………….B-5–8 Couplers……………………………………………………B-7–8 Nipples ……………………………………………………..B-7–8 Repair Kits & Replacement Parts ………………………B-8 60 Series Steam ……………………………………………..B-9 Couplers……………………………………………………….B-9 Nipples …………………………………………………………B-9 6600 Series……………………………………………..B-10–11 Couplers……………………………………………………..B-11 Nipples ……………………………………………………….B-11 SM Series ……………………………………………….B-12–13 Couplers……………………………………………………..B-13 Nipples ……………………………………………………….B-13 HP Series………………………………………………..B-14–15 Couplers……………………………………………………..B-15 Nipples ……………………………………………………….B-15 4000 Series……………………………………………..B-16–17 Couplers……………………………………………………..B-17 Nipples ……………………………………………………….B-17 4200 Series………………………………………………B-18-19 Couplers……………………………………………………..B-19 Nipples ……………………………………………………….B-19 Non-Spill Couplings NS Series…………………………………………………B-20-21 Couplers……………………………………………………..B-21 Nipples ……………………………………………………….B-21 Adapters……………………………………………………….B-22 FF Series …………………………………………………B-23-24 Couplers……………………………………………………..B-24 Nipples ……………………………………………………….B-24 FEM Series ………………………………………………B-25-26 Couplers……………………………………………………..B-26 Nipples ……………………………………………………….B-26 FC Series ……………………………………………………..B-27 Nipples ……………………………………………………….B-27 FEC Series……………………………………………………B-28 Nipples ……………………………………………………….B-28 FH Series…………………………………………………B-29-30 Couplers……………………………………………………..B-30 Nipples ……………………………………………………….B-30 FS Series …………………………………………………B-31-32 Couplers……………………………………………………..B-32 Nipples ……………………………………………………….B-32 Repair Kits…………………………………………………..B-32 Connect Under Pressure Couplings 6100 Series………………………………………………B-33-35 Couplers…………………………………………………B-34-35 Nipples…………………………………………………..B-34-35 8200 Series………………………………………………B-36-37 Couplers……………………………………………………..B-37 Nipples ……………………………………………………….B-37 9200 Series………………………………………………B-38-39 Couplers……………………………………………………..B-39 Nipples ……………………………………………………….B-39 5000 Series………………………………………………B-40-41 Couplers……………………………………………………..B-41 Nipples ……………………………………………………….B-41 High Pressure Couplings 3000 Series………………………………………………B-42-43 Couplers……………………………………………………..B-43 Nipples ……………………………………………………….B-43 TC Series ……………………………………………………..B-44 Couplers……………………………………………………..B-44 Nipples ……………………………………………………….B-44 1141 Series…………………………………………………..B-45 Mold Coolant Line Couplings Moldmate Series……………………………………….B-46-50 Couplers…………………………………………………B-47-48 Sub Assemblies & Replacement Parts ……………B-48 Nipples…………………………………………………..B-49-50 High Flow Couplings ST Series …………………………………………………B-51-53 Couplers……………………………………………………..B-52 Nipples ……………………………………………………….B-53 Water Service………………………………………………..B-54 HO Series……………………………………………………..B-55 Special Purpose – Miniature DM Series……………………………………………….B56-B57 Dust Plugs and Dust Caps ……………………….B-58-60 Ordering Information …………………………………….B-61 Promotional Products-Keychains…………………..B-62 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-4 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics Coupling Selection & Ordering Guide **Optional Seals Seal Material Specific Coupling Series Using Optional Seal Suffix Designator at left W Ethylene Propylene 60, 6600, 4000, 4200, 6100, 5000, 8200, 9200, ST Y Fluorocarbon 60, 6600, 4000, 4200, 6100, 5000, 8200, 9200, ST, Moldmate (if used wih oil based media only) Z Neoprene 60, 6600, 4000, 4200, 6100, 5000, 8200, 9200, ST E5 Ethylene Propylene SM, HP, NS, FF, FEM, FH, FS, HO E4 Fluorocarbon SM, HP, NS, FF, FEM, FH, FS (STD-no suffix needed), HO, TC (Fluorocarbon only-no suffix needed) E12 Neoprene SM, HP, NS, FF, FEM, FH, FS,HO E47 Perfluoroelastomer SM, HP, NS, FF, FEM, FH, FS (Contact the division re: Perfluoroelastomer options) 3000 and 1141 with Polyurethane only (no suffix needed) Water Service (Nitrile only) To select proper Seal Materials, see Fluid Compatibility chart in Appendices, or contact your Parker Quick Coupling Distributor. Valving Body Material* Locking Std. Seal Temp Rated Size Br S S3 S6 Mechanism Material** Range** Pressure General Purpose 60 Series Poppet 1/8 – 2 1/2″ Ball Nitrile -40° to +250° F 800 to 5000 PSI 60 Series Steam Poppet 1/4 to 1″ Ball Ethylene Propylene -65° to +400° F 6600 Series Poppet 1/4 to 1″ Ball Nitrile -40° to +250° F 4000 to 5000 PSI SM Series Poppet 1/4 to 3/4″ Ball Nitrile -40° to +250° F 4500 to 6000 PSI HP Series Poppet 1 to 1 1/2″ Ball Nitrile -40° to +250° F 5000 PSI 4000 Series Poppet/Ball 1/4 to 1″ Ball Nitrile -40° to +250° F 3000 PSI 4200 Series Poppet/Ball 3/8 to 1/2″ Ball Nitrile -40° to +250° F 3000 PSI Non-Spill NS Series Flush Face 3/8 to 1″ Ball Nitrile -40° to +250° F 2500 PSI Adapter Flush Face/Poppet 1/2″ Ball Nitrile/Polyurathane -40° to +250° F 3000 to 3625 PSI FF Series Flush Face 1/4 to 1″ Ball Nitrile/Polyurathane -40° to +250° F 3000 to 5000 PSI FEM Series Flush Face 1/4 to 1″ Ball Nitrile/Polyurathane -40° to +250° F 3000 to 5000 PSI FS Series Flush Face 1/4 to 1″ Ball Fluorocarbon -15° to +400° F 2000 PSI Non-Spill Connect Under Pressure FC Series Flush Face 3/8 to 3/4″ Ball Nitrile/Polyurathane -40° to +250° F 3000 PSI FEC Series Flush Face 1/2 to 3/4″ Ball Nitrile/Polyurathane -40° to +250° F 3000 PSI 6100 Series Flush Face 3/4 to 1 1 /2″ Threads Nitrile -40° to +250° F 2000 to 3000 PSI Connect Under Pressure 8200 Series Poppet 1/2″ Ball Nitrile -40° to +250° F 3000 PSI 9200 Series Poppet 1/2″ Ball Nitrile -40° to +250° F 3000 PSI 5000 Series Ball 1/2″ Threads Nitrile -40° to +250° F 2500 PSI High Pressure FH Series Flush Face 3/8″ Ball Nitrile -40° to +250° F 10,000 PSI 3000 Series Ball 1/4 to 3/8″ Threads Polyurethane -22° to +230° F 10,000 PSI TC Series Poppet 3/8″ Ball Fluorocarbon -15° to +400° F 10,000 PSI 1141 Series Poppet 1/4″ Threads Polyurethane -40° to +180° F 10,000 PSI Mold Coolant Moldmate Valved & Unvalved 1/4 to 1/2″ Ball Silicone -20° to +400° F 200 PSI High Flow ST Series Unvalved 1/8 to 1 1/2″ Ball Nitrile -40° to +250° F 2500 to 6700 PSI HO Series Unvalved 1/4 to 1/2″ Ball Nitrile -40° to +250° F 10,000 to 15,000 PSI Water Service Unvalved 3/4″ Ball Nitrile -40° to +250° F 200 PSI Special Purpose – Miniature DM Series Poppet 1/8 Ball Fluorocarbon -15° to +400° F 250 PSI See Fluid Compatibility chart and/or consult factory for questions regarding proper material for specific applications. * Material Code: Br = Brass; S = Steel; S3 = 303 Stainless Steel; S6 = 316 Stainless Steel Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-5 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics General Purpose Couplings 60 Series Applications Parker general purpose couplings, are used across the spectrum of hydraulic applications. These Double Shut-Off couplings can be found anywhere that fluid transfer lines need to be connected and disconnected for operation or maintenance of equipment, and a loss of fluid is undesirable. Primarily used with hydraulic fluid, general purpose Double Shut-Off couplings are also used with chemicals, water, steam, and some gases. Special Order Information 60 Series couplings are available in Chromium-6 Free plated steel, brass, 303 stainless steel, and 316 stainless steel. Brass couplings have double O-Ring seals and stainless locking balls. Standard seal material is Nitrile; optional seal materials are available. For 316 stainless steel products, standard seal material is Fluorocarbon, and other seal materials are available upon request. See Fluid Compatibility Chart at end of this catalog. All sizes of 60 Series can be furnished with locking sleeves. Place suffix letters “-SL” (Sleeve-Lok) after regular catalog numbers. Example H3-62-SL. Parker 60 Series heavy duty nipples are recommended where high cycle rates and pressure surges are encountered. Machined from high tensile steel and induction hardened, they are Chromium-6 Free plated. To specify a heavy duty nipple, add the prefix “HD” to the steel part number; thus: HD-H2-63. Note Protective dust plugs and caps play a crucial role in the life of a quick coupling and no purchase of a hydraulic quick coupling is complete without the selection of an appropriate dust plug and cap. See pages noted in Table of Contents for dust plugs and caps for the Parker full line of hydraulic couplings. Seal Temperature Range: Nitrile: -40°F to +250°F (Standard seal for Brass, Steel, & 303 Stainless Steel couplings). Fluorocarbon: -15°F to +400°F (Standard seal for 316 Stainless Steel couplings). Other Seal materials: Contact the Division for availability. Vacuum Data: 27.4 inches Hg. both connected and disconnected (1-1/2″ and 2-1/2″ body size 60 Series couplings are not recommended for service in disconnected mode) Note: Read the Safety Guide for Selecting and Using Quick Action Couplings and Related Accessories before making a coupling selection. It may be found in Parker Hannifin Quick Coupling Division catalogs and is available as Parker Publication No. 3800-B1.0. 1/8 1/4 3/8 1/2 3/4 1 1 1/2 2 1/2 Rated Pressure (PSI) 3000 3700 2700 3500 2200 1500 1500 1200 5000 5000 5000 5000 3000 3000 1500 1500 5000 5000 4000 4000 2500 2000 1500 1500 5000 5000 4000 4000 3000 3000 N/A N/A Body Size (in.) 1/8 1/4 3/8 1/2 3/4 1 1 1/2 2 1/2 Rated Flow (GPM) .8 3 6 12 28 50 100 200 Low Cycle, Non-pulsating Pressure Rating: Applications with lower cycle life and no severe cyclic pressure fluctuations, essentially steady pressure during an operating cycle. Typical applications include hydraulic jacks, mine roof support systems, and high pressure fluid transfer (pumping water or slurry in oil wells). Minor pump ripple is considered non-pulsating. Impulse tested at rated pressure. ANSI/ISO Pressure Rating: Dynamic applications with normal to moderate hydraulic shocks such as general industrial equipment, hydraulic presses, agricultural equipment, etc. Impulse tested at a multiple (125% to 133%) of rated pressure. Body Size (in.) 1/8 1/4 3/8 1/2 3/4 1 1 1/2 2 1/2 Rated Pressure (PSI) Brass 1000 1000 1000 1000 1000 1000 800 800 Stainless steel 2000 2000 1500 1500 1500 1000 1000 1000 Steel 5000 5000 4000 4000 2500 2000 1000 1000 Steel w / HD N/A 5000 4000 4000 3000 3000 N/A N/A nipple Specifications Industry Standard: Parker 60 Series couplings comply with ISO 7241 Series B Standard. Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-6 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics General Purpose Couplings 60 Series 2 6 3 1 5 1 7 2 8 4 Features 1. Large flow areas machined into the body of the coupler and nipple facilitate flow around the valve, for a high flow capacity. 2. Positive valve stop. The perch maintains valve alignment and provides metal to metal valve stop to ensure that the valves open fully, every time. 3. Captive valve seal assures “bubble tight” poppet sealing. The valve seal is positively captured by the metal poppet to minimize seal washout or damage from high velocity fluid. 4. Hardened nipples and sleeves (steel) and solid barstock construction make for a quality coupling with maximum resistance to damage from hydraulic and mechanical shock. 5. The seal is designed to withstand high pressures and provide reliable sealing. A wide selection of optional seal materials are available, see Fluid Compatibility Chart at end of this catalog for selection assistance. Steel versions feature PTFE back-up rings that support mating seals for high pressure applications. Brass couplers have a double Oring seal for redundancy in low pressure, vacuum and steam applications. 6. Durable ball-locking mechanism assures reliable connection, every time. A large number of locking balls distributes the work load evenly while providing alignment and swiveling action to reduce hose torque and prolong hose life. 7. Manufactured from brass, steel and stainless steel as standard materials. A wide range of seals allow these couplings to be used with a broad range of media. 8. Also available with a Straight Thread (ORB) end configuration available as standard. 9. Industrial Standard: Parker 60 Series couplings comply with ISO 7241, Series B Standard. Performance 60 Series (1/8″ & 1/4″) Test Fluid: Oil – 150 SUS 0 5 10 15 20 25 30 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 Flow in USGPM Pressure Drop in PSID 1/8″ 1/4″ 60 Series (3/8″ & 1/2″) Test Fluid: Oil – 150 SUS 0 5 10 15 20 25 30 35 40 0 2 4 6 8 10 12 14 16 18 Flow in USGPM Pressure Drop in PSID 3/8″ 1/2″ 60 Series (3/4″ & 1″) Test Fluid: Oil – 150 SUS 0 5 10 15 20 25 30 35 40 45 0 10 20 30 40 50 60 70 Flow in USGPM Pressure Drop in PSID 3/4″ 1″ 60 Series (1-1/2″ & 2-1/2″) Test Fluid: Oil – 200 SUS 0 20 40 60 80 100 120 140 0 50 100 150 200 250 300 Flow in USGPM Pressure Drop in PSID 1-1/2″ 2-1/2″ Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-7 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics General Purpose Couplings 60 Series Couplers Female Thread Nipples Female Thread A C B D E G F Optional Seals 60 Series Body Part Part Part No. Part No. Thread Thread Dimensions (in.) Size No. Wt. (LB.) No. Wt. (LB.) Type 303 Wt. (LB.) Type 316 Wt. (LB.) Size Size Overall Wrench Largest (in.) Brass P/Piece Steel P/Piece Stainless P/Piece Stainless P/Piece NPTF ORB Length Flats Diameter A B C 1/8 BH1-60 0.16 H1-62 0.16 SH1-62 0.16 SSH1-62Y 0.15 1/8-27 – 1.90 0.68 0.96 1/8 – – H1-62-T4 0.18 SH1-62-T4 0.10 SSH1-62Y-T4 0.17 – 7/16-20 2.06 0.68 0.96 1/4 BH2-60 0.32 H2-62 0.30 SH2-62 0.30 SSH2-62Y 0.30 1/4-18 – 2.26 0.81 1.14 1/4 – – H2-62-T6 0.31 SH2-62-T6 0.31 SSH2-62Y-T6 0.31 – 9/16-18 2.41 0.81 1.14 3/8 BH3-60 0.43 H3-62 0.40 SH3-62 0.40 SSH3-62Y 0.40 3/8-18 – 2.49 0.88 1.40 3/8 – – H3-62-T8 0.51 SH3-62-T8 0.51 SSH3-62Y-T8 0.51 – 3/4-16 2.75 1.00 1.40 1/2 BH4-60 0.80 H4-62 0.73 SH4-62 0.75 SSH4-62Y 0.76 1/2-14 – 2.87 1.12 1.77 1/2 – – H4-62-T10 0.78 SH4-62-T10 0.75 SSH4-62Y-T10 0.78 – 7/8-14 3.05 1.12 1.77 3/4 BH6-60 – H6-62 1.30 SH6-62 1.31 SSH6-62Y 1.33 3/4-14 – 3.56 1.31 2.14 3/4 – – H6-62-T12 1.39 SH6-62-T12 1.34 SSH6-62Y-T12 1.40 – 1-1/16-12 3.56 1.31 2.14 1 BH8-60 – H8-62 1.95 SH8-62 1.95 SSH8-62Y 1.95 1-11 1/2 – 4.18 1.62 2.52 1 – – H8-62-T16 1.95 SH8-62-T16 1.95 SSH8-62Y-T16 1.95 – 1-5/16-12 4.18 1.62 2.52 Body Part Part Part No. Part No. Thread Thread Dimensions (in.) Size No. Wt. (LB.) No. Wt. (LB.) Type 303 Wt. (LB.) Type 316 Wt. (LB.) Size Size Overall Exposed Wrench Largest (in.) Brass P/Piece Steel P/Piece Stainless P/Piece Stainless P/Piece NPTF ORB Length Length* Flats Diameter D E F G 1/8 BH1-61 0.04 H1-63 0.03 SH1-63 0.03 SSH1-63Y 0.04 1/8-27 – 1.26 0.44 0.56 0.65 1/8 – 0.06 H1-63-T4 0.05 SH1-63-T4 – SSH1-63Y-T4 0.06 – 7/16-20 1.41 0.59 0.69 0.79 1/4 BH2-61 0.09 H2-63 0.08 SH2-63 0.08 SSH2-63Y 0.08 1/4-18 – 1.54 0.55 0.75 0.87 1/4 – 0.11 H2-63-T6 0.10 SH2-63-T6 0.10 SSH2-63Y-T6 0.10 – 9/16-18 1.69 0.70 0.88 1.01 3/8 BH3-61 0.10 H3-63 0.12 SH3-63 0.12 SSH3-63Y 0.12 3/8-18 – 1.68 0.54 0.88 1.01 3/8 – 0.12 H3-63-T8 0.16 SH3-63-T8 0.16 SSH3-63Y-T8 0.14 – 3/4-16 1.94 0.80 1.00 1.15 1/2 BH4-61 0.25 H4-63 0.24 SH4-63 0.24 SSH4-63Y 0.24 1/2-14 – 1.94 0.69 1.12 1.30 1/2 – 0.28 H4-63-T10 0.27 SH4-63-T10 0.27 SSH4-63Y-T10 0.27 – 7/8-14 2.12 0.87 1.19 1.37 3/4 BH6-61 0.50 H6-63 0.46 SH6-63 0.45 SSH6-63Y 0.46 3/4-14 – 2.43 0.79 1.38 1.59 3/4 – 0.55 H6-63-T12 0.46 SH6-63-T12 0.50 SSH6-63Y-T12 0.50 – 1-1/16-12 2.54 0.90 1.34 1.59 1 BH8-61 0.76 H8-63 0.76 SH8-63 0.76 SSH8-63Y 0.76 1-11 1/2 – 2.91 0.99 1.62 1.88 1 – 0.80 H8-63-T16 0.80 SH8-63-T16 0.80 SSH8-63Y-T16 0.80 – 1-5/16-12 2.91 0.99 1.62 1.88* Optional Seals Suffix W Ethylene Propylene (EPR) Y Fluorocarbon Z Neoprene Perfluoroelastomer (Contact factory for Seal options) * This dimension represents the portion that is exposed when the nipple is inserted into the mating Parker Coupler. Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-8 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics General Purpose Couplings 60 Series Couplers Female Thread C A B D E G F Nipples Female Thread Replacement Parts 60 Series Couplers Repair Kits Body Part Part Part No. Part No. Thread Thread Dimensions (in.) Size No. Wt. (LB.) No. Wt. (LB.) Type 303 Wt. (LB.) Type 316 Wt. (LB.) Size Size Overall Exposed Wrench Largest (in.) Brass P/Piece Steel P/Piece Stainless P/Piece Stainless P/Piece NPTF ORB Length Length* Flats Diameter D E F G 1 1/2 BH12-61L 2.96 H12-63L 3.10 SH12-63L 3.06 SSH12-63LY – 1 1/4-11 1/2 – 4.76 2.69 2.38‡ 2.75† 1 1/2 BH12-61N 2.96 H12-63N 3.10 SH12-63N 3.06 SSH12-63NY – 1 1/2-11 1/2 – 4.76 2.69 2.38‡ 2.75† 1 1/2 – – H12-63-T20 3.15 SH12-63-T20 3.14 SSH12-63Y-T20 – – 1 5/8-12 4.76 2.69 2.38‡ 2.75† 1 1/2 – – H12-63-T24 3.15 SH12-63-T24 3.14 SSH12-63Y-T24 – – 1 7/8-12 4.76 2.69 2.38‡ 2.75† 2 1/2 BH2016-61 7.78 H2016-63 7.90 SH2016-63 7.92 SSH2016-63Y – 2-11 1/2 – 5.48 2.90 3.75 4.10 2 1/2 BH2020-61 8.12 H2020-63 8.16 SH2020-63 8.16 SSH2020-63Y – 2 1/2-8 – 5.95 3.37 3.75 4.10 2 1/2 BH2024-61 – H2024-63 – SH2024-63 – SSH2024-63Y – 3-8 – 6.87 4.29 4.00 4.35 * This dimension represents the portion that is exposed when the nipple is inserted into the mating Parker Coupler. † Largest diameter on Brass is 2.96″ across Hex Corners ‡ Hex on 303 Stainless is 2.50 in. Body Part Part Part No. Part No. Thread Thread Dimensions (in.) Size No. Wt. (LB.) No. Wt. (LB.) Type 303 Wt. (LB.) Type 316 Wt. (LB.) Size Size Overall Wrench Largest (in.) Brass P/Piece Steel P/Piece Stainless P/Piece Stainless P/Piece NPTF ORB Length Flats Diameter A B C 1 1/2 BH12-60L 4.58 H12-62L 4.70 SH12-62L 4.68 SSH12-62LY 4.68 1 1/4-11 1/2 – 4.86 2.38‡ 3.00 1 1/2 BH12-60N 4.58 H12-62N 4.70 SH12-62N 4.68 SSH12-62NY 4.68 1 1/2-11 1/2 – 4.86 2.38‡ 3.00 1 1/2 – 4.61 H12-62-T20 4.72 SH12-62-T20 4.71 SSH12-62Y-T20 4.71 – 1 5/8-12 4.86 2.38‡ 3.00 1 1/2 – 4.61 H12-62-T24 4.72 SH12-62-T24 4.71 SSH12-62Y-T24 4.71 – 1 7/8-12 4.86 2.38‡ 3.00 2 1/2 BH2016-60 11.06 H2016-62 10.58 SH2016-62 – SSH2016-62Y – 2-11 1/2 – 5.57 3.75 4.10 2 1/2 BH2020-60 11.42 H2020-62 10.91 SH2020-62 – SSH2020-62Y – 2 1/2-8 – 6.04 3.75 4.10 2 1/2 BH2024-60 – H2024-62 – SH2024-62 – SSH2024-62Y – 3-8 – 6.96 4.00 4.35 ‡Wrench Flat on 303 Stainless is 2.50 in. Body Size (in.) O-Rings – Nitrile Back-Up Rings 1/8 50001-013-0010 H67A-28 1/4 50001-015-0010 H67C-28 3/8 50001-116-0010 4118007 1/2 50001-213-0010 4128002 3/4 50001-218-0010 4148001 1 50001-222-0010 4158001 1-1/2 50001-124-0010 (Valve) 50001-138-0260 (Fitting) 50001-224-0010 (Body 2 req.) 2-1/2 50001-133-0010 (Valve) 50001-234-0260 (Fitting) 50001-333-0010 (Body) Couplers Nipples Body Repair Kit Used For Repair Kit Used For Size (in.) Part No. Part No. Part No. Part No. 3/8 H67E-62K H3-62 H67E-63K H3-63 BH67E-60K BH3-60 BH67E-61K BH3-61 SH67E-62K SH3-62 SH67E-63K SH3-63 SSH67-62KY SSH3-62Y SSH67E-63KY SSH3-63Y 1/2 H67F-62K H4-62 H67F-63K H4-63 BH67F-60K BH4-60 BH67F-61K BH4-61 SH67F-62K SH4-62 SH67F-63K SH4-63 SSH67F-62KY SSH4-62Y SSH67F-63KY SSH4-63Y 3/4 H67G-62K H6-62 H67G-63K H6-63 BH67G-60K BH6-60 BH67G-61K BH6-61 SH67G-62K SH6-62 SH67G-63K SH6-63 SSH67G-62KY SSH6-62Y SSH67G-63KY SSH6-63Y 1 H67J-62K H8-62 H67J-63K H8-63 BH67J-60K BH8-60 BH67J-61K BH8-61 SH67J-62K SH8-62 SH67J-63K SH8-63 SSH67J-62KY SSH8-62Y SSH67J-63KY SSH8-63Y Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-9 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics General Purpose Couplings 60 Series Steam Couplings Repair Kits Steam Coupling Nipple Female Pipe Thread D E F G Specifications Body Size (in.) 1/4 to 1 Standard Seal Material Ethylene Propylene Temperature Range up to +400° Body Repair Kit Used For Size Part No. Part No. 3/8 H68E-67K H3-68 3/8 H69E-67K H3-69 Body Part Thread Dimension (in.) Size No. Size Overall Wrench Largest Wt. (LB.) (in.) Brass NPTF Length Flats Diameter P/Piece A B C 1/4 BH2-60-STM 1/4-18 2.26 0.81 1.14 0.30 3/8* H3-68 3/8-18 2.50 0.88 1.77 0.50 1/2 BH4-60-STM 1/2-14 2.87 1.12 1.77 0.75 3/4 BH6-60-STM 3/4-14 3.56 1.31 2.14 1.31 1 BH8-60-STM 1-11 1/2 4.18 1.62 2.52 1.95 * See Photo and Drawing below for 3/8 inch size coupler configuration. Body Part Thread Dimension (in.) Size No. Size Overall Exposed* Hex Largest Wt. (LB.) (in.) Brass NPTF Length Length Size Diameter P/Piece D E F G 1/4 BH2-61-STM 1/4-18 1.54 0.65 0.75 0.87 0.08 3/8 H3-69 3/8-18 1.68 0.52 0.88 1.01 0.13 1/2 BH4-61-STM 1/2-14 1.94 0.69 1.12 1.30 0.24 3/4 BH6-61-STM 3/4-14 2.43 0.79 1.38 1.59 0.46 1 BH8-61-STM 1-11 1/2 2.91 0.99 1.62 1.88 0.76 A C B Coupler – 3/8 Inch Configuration Female Pipe Thread A C B * This dimension represents the portion that is exposed when the nipple is inserted into the mating Parker Coupler. Coupler Female Pipe Thread Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-10 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics General Purpose Couplings 6600 Series Performance Features • Poppet valves are mated with a solid metal perch that maintains valve alignment and prevents flow checking. • Both the coupler’s sleeve and the nipple’s body are hardened to make the 6600 Series couplings resistant to damage from brinelling and mechanical shock. • The durable-ball-locking mechanism ensures a reliable connection every time. • 6600 Series couplings have female pipe and straight thread end configurations as standard. • Parker 6600 Series couplings interchange with couplings meeting ISO 7241-1, Series A. Applications Versatile Parker 6600 Series couplings are used in a wide range of hydraulic applications including construction equipment, manufacturing machinery, and in-plant systems. They can be found anywhere the fluid transfer lines need to be connected and disconnected for operation or maintenance of equipment. Rugged construction makes the 6600 Series a good choice for mobile applications including dump trucks, snow plows, refuse hauling, mining, asphalt paving, truck trailer connections and many more. In-plant machinery applications include hydraulic fluid, chemicals and gas lines for paper mills, steel production, and many varieties of plant maintenance and production equipment. Note: Protective dust plugs and caps play a crucial role in the life of a quick coupling and no purchase of a hydraulic quick coupling is complete without the selection of an appropriate dust plug and cap. See pages noted in Table of Contents for dust plugs and caps for the Parker full line of hydraulic couplings. Specifications Body Size (in.) 1/4 3/8 1/2 3/4 1 Rated Pressure (PSI) 5000 4000 4000 4000 4000 Rated Flow (GPM) 0.8 6 12 28 50 Temperature Range (Nitrile seals) -40° to +250°F 6600 Series (1/4″) Test Fluid: Oil – 150 SUS 0 5 10 15 20 25 0 0.2 0.4 0.6 0.8 1 1.2 Flow in USGPM Pressure Drop in PSID 1/4″ 6600 Series (3/8″& 1/2″) Test Fluid: Oil – 150 SUS 0 5 10 15 20 25 30 35 40 45 0 2 4 6 8 10 12 14 16 18 Flow in USGPM Pressure Drop in PSID 3/8″ 1/2″ 6600 Series (3/4″ & 1″) Test Fluid: Oil – 150 SUS 0 5 10 15 20 25 30 35 40 45 50 0 10 20 30 40 50 60 70 Flow in USGPM Pressure Drop in PSID 3/4″ 1″ Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-11 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics General Purpose Couplings 6600 Series Couplers Female Thread Nipples Female Thread Replacement Parts 6600 Series A C B D E G F Body Part Thread Thread Dimensions (in.) Size No. Size Size Overall Hex Largest Wt. (LB.) (in.) Steel NPTF ORB Length Size Diameter P/Piece A B C 1/4 6601-2-4 1/8-27 — 1.85 .88 1.08 0.27 1/4 6601-4-4 1/4-18 — 1.85 .88 1.08 0.26 3/8 6601-6-6 3/8-18 — 2.18 1.06 1.27 0.39 3/8 6608-6-6 — 9/16-18 2.18 1.06 1.27 0.38 1/2 6601-8-10 1/2-14 — 2.75 1.25 1.52 0.67 1/2 6601-12-10 3/4-14 — 2.88 1.38 1.52 0.71 1/2 6608-8-10 — 3/4-16 2.74 1.25 1.52 0.67 1/2 6608-10-10 — 7/8-14 2.79 1.25 1.52 0.64 1/2 6608-12-10 — 1 1/16-12 3.01 1.38 1.52 0.77 3/4 6601-12-12 3/4-14 — 3.36 1.62 1.90 1.31 3/4 6608-12-12 — 1 1/16-12 3.35 1.62 1.90 1.31 1 6601-16-16 1-11 1/2 — 4.11 1.88 2.14 1.93 1 6608-16-16 — 1 5/16-12 4.11 1.88 2.14 1.75 Body Part Thread Thread Dimensions (in.) Size No. Size Size Overall Exposed* Hex Largest Wt. (LB.) (in.) Steel NPTF ORB Length Length Size Diameter P/Piece D E F G 1/4 6602-2-4 1/8-27 — 1.41 .50 .56 .65 0.05 1/4 6602-4-4 1/4-18 — 1.41 .58 .75 .87 0.07 3/8 6602-6-6 3/8-18 — 1.63 .72 .88 1.01 0.11 3/8 6610-6-6 — 9/16-18 1.63 .72 .88 1.01 0.13 1/2 6602-8-10 1/2-14 — 2.08 .78 1.06 1.23 0.21 1/2 6602-12-10 3/4-14 — 2.30 .78 1.38 1.59 0.33 1/2 6610-8-10 — 3/4-16 2.08 .76 1.06 1.23 0.22 1/2 6610-10-10 — 7/8-14 2.08 .82 1.12 1.30 0.21 1/2 6610-12-10 — 1 1/16-12 2.30 1.04 1.38 1.59 0.33 3/4 6602-12-12 3/4-14 — 2.55 1.18 1.38 1.59 0.49 3/4 6610-12-12 — 1 1/16-12 2.55 1.18 1.38 1.59 0.47 1 6602-16-16 1-11 1/2 — 3.10 1.34 1.62 1.88 0.75 1 6610-16-16 — 1 5/16-12 3.10 1.34 1.62 2.17 0.72 Body Size (in.) 1/4 3/8 1/2 3/4 1 O-Rings – Nitrile 50001-112-0010 50001-115-0010 50001-211-0010 50001-123-0010 50001-126-0010 Back-up Rings 4118006 4118005 50-140-4 4138001 4148002 * This dimension represents the portion that is exposed when the nipple is inserted into the mating parker Coupler. Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-12 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics General Purpose Couplings SM Series Features The SM Series couplings feature: • Poppet valves with captive valve seals: the valve seal is positively captured by the metal poppet to minimize seal washout. • Coupler and nipple are precision machined from solid barstock. • SM Series are available in female pipe (NPTF), SAE O-Ring Boss and British Pipe (BSPP) as standard. Applications SM Series couplings are used across the spectrum of hydraulic applications. These Double Shut-Off couplings can be found anywhere that fluid transfer lines need to be connected and disconnected for operation or maintenance of equipment, and a loss of fluid is undesirable. Designed for use with commercial grades of hydraulic fluids. These couplings are ideally suited for all mobile or industrial applications. Note: Protective dust plugs and caps play a crucial role in the life of a quick coupling and no purchase of a hydraulic quick coupling is complete without the selection of an appropriate dust plug and cap. See pages noted in Table of Contents for dust plugs and caps for the Parker full line of hydraulic couplings. Specifications Body Size (in.) 1/4 1/2 3/4 Rated Pressure (PSI) 6,000 6,000 4,500 Rated Flow (GPM) 3 12 28 Temperature Range (Nitrile Seals) -40° to +250°F Performance SM Series (1/4″) Test Fluid: Oil – 200 SUS 0 5 10 15 20 25 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 Flow in USGPM Pressure Drop in PSID 1/4″ SM Series (1/2″ & 3/4″) Test Fluid: Oil – 200 SUS 0 5 10 15 20 25 30 35 0 5 10 15 20 25 30 35 40 Flow in USGPM Pressure Drop in PSID 1/2″ 3/4″ Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-13 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics General Purpose Couplings SM Series Couplers Female Thread Nipples Female Thread Optional Seals C B A G F E D Body Part Dimensions (in.) Size No. Thread Overall Hex Largest Wt. (LB.) (in.) Steel Size Length Size Diameter P/Piece A B C 1/4 SM-251-4FP 1/4-18 NPTF 2.09 0.75 1.06 0.24 1/4 SM-251-4FB G1/4 BSPP 2.24 0.75 1.06 0.26 1/4 SM-251-6FP 3/8-18 NPTF 2.24 0.94 1.06 0.28 1/4 SM-251-6FB G3/8 BSPP 2.24 0.94 1.06 0.26 1/4 SM-251-6FO 9/16-18ORB 2.24 0.75 1.06 0.25 1/2 SM-501-8FP 1/2-14 NPTF 3.00 1.25 1.56 0.70 1/2 SM-501-8FB G1/2 BSPP 3.00 1.25 1.56 0.74 1/2 SM-501-12FP 3/4-14 NPTF 3.07 1.37 1.56 0.81 1/2 SM-501-12FB G3/4 BSPP 3.16 1.37 1.56 0.85 1/2 SM-501-8FO 3/4-16ORB 3.16 1.25 1.56 0.70 3/4 SM-751-12FO 1 1/16-12ORB 3.89 1.62 2.25 1.78 3/4 SM-751-12FP 3/4-14 NPTF 3.77 1.62 2.22 1.83 3/4 SM-751-12FB G3/4 BSPP 3.89 1.62 2.22 1.88 3/4 SM-751-16FP 1-11 1/2 NPTF 3.98 1.62 2.22 1.84 3/4 SM-751-16FB G 1 BSPP 3.98 1.62 2.22 1.89 3/4 SM-751-16FO 1-5/16-12ORB 3.98 1.62 2.22 1.89 Body Part Dimensions (in.) Size No. Thread Overall Exposed* Hex Largest Wt. (LB.) (in.) Steel Size Length Length Size Diameter P/Piece D E F G 1/4 SM-252-4FP 1/4-18 NPTF 1.49 0.50 0.75 0.87 0.08 1/4 SM-252-4FB G1/4 BSPP 1.64 0.65 0.75 0.87 0.09 1/4 SM-252-6FP 3/8-18 NPTF 1.64 0.81 0.94 1.08 0.14 1/4 SM-252-6FB G3/8 BSPP 1.64 0.81 0.94 1.08 0.14 1/4 SM-252-6FO 9/16-18ORB 1.64 0.55 0.75 0.87 0.08 1/2 SM-502-8FO 3/4-16ORB 2.14 0.72 1.06 1.23 0.16 1/2 SM-502-8FP 1/2-14 NPTF 2.01 0.45 1.06 1.23 0.15 1/2 SM-502-8FB G1/2 BSPP 2.01 0.60 1.06 1.23 0.18 1/2 SM-502-12FP 3/4-14 NPTF 2.31 0.90 1.37 1.59 0.30 1/2 SM-502-12FB G3/4 BSPP 2.63 1.07 1.37 1.59 0.34 3/4 SM-752-12FO 1 1/16-12ORB 2.60 0.39 1.50 1.73 0.48 3/4 SM-752-12FP 3/4-14 NPTF 2.48 0.39 1.50 1.73 0.52 3/4 SM-752-12FB G3/4 BSPP 2.60 0.53 1.50 1.73 0.56 3/4 SM-752-16FP 1-11 1/2 NPTF 2.69 0.67 1.62 1.88 0.56 3/4 SM-752-16FB G 1 BSPP 2.69 0.67 1.62 1.88 0.68 3/4 SM-752-16FO 1-5/16-12ORB 2.69 0.67 1.62 1.88 0.68 * This dimension represents the portion that is exposed when the nipple is inserted into the mating parker Coupler. Optional Seals Suffix (Standard seals are Nitrile) E4 Fluorocarbon E5 Ethylene Propylene (EPR) E12 Neoprene Perfluoroelastomer (Contact Factory for Seal Options) Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-14 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics General Purpose Couplings HP Series (High Pressure Coupling) Performance HP Series (1″ & 1-1/2″) Test Fluid: Oil – 200 SUS 0 5 10 15 20 25 30 35 40 45 0 20 40 60 80 100 120 140 Flow in USGPM Pressure Drop in PSID 1″ 1-1/2″ Specifications Body Size (in.) 1 1-1/2 Rated Pressure (PSI) 5,000 5,000 Rated Flow (GPM) 50 100 Temperature Range (std seals) -40° to +250°F Features • Operating pressures up to 5,000 PSI (350 Bar). • Soft seat valving prevents leakage when coupler and nipple are disconnected. • Made of Carbon Steel. Exterior is Chromium-6 Free plated for corrosion resistance. • Smooth Flow Path Minimizes Pressure Drop. • Nitrile Body Seal supported by PTFE washer. Backup washer keeps seal from extruding at high pressures. • Heat Treated Nipple and Heavy Duty Locking Collar withstands high pressure surges, hose twist and repeated pressure pulses. • Nitrile Seals for General Purpose Hydraulic Applications. Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-15 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics General Purpose Couplings HP Series (High Pressure Coupling) Couplers Nipples Dust Plugs and Caps A B C D E F G Body Part Thread Overall Wrench Largest Wt. (LB.) Size (in.) No. Size Length Flats Diameter P/Piec A B C 1 HP-1001-16FP 1 11-1/2 NPSF 3.95 1.62 2.38 2.10 1 HP-1001-16FO 1 15/16-12ORB 4.35 1.62 2.38 2.10 1 1/2 HP-1501-24FP 1 1/2-11 1/2 NPTF 4.93 2.25 3.00 4.40 1 1/2 HP-1501-24FO 1 7/8 -12 ORB 4.93 2.25 3.00 4.40 Protective Plugs for Coupler Protective Caps for Nipple P/N Material Fits Coupler P/N Material Fits Nipple HPP–100 Aluminum HP–1001 HPC–100 Aluminum HP-1002 HPP–150 Aluminum HP–1501 HPC–150 Aluminum HP-1502 Body Part Thread Overall Wrench Largest Exposed Wt. (LB.) Size (in.) No. Size Length Flats Diameter Length* P/Piece D E F G 1 HP-1002-16FP 1 11-1/2 NPSF 3.00 1.62 1.88 1.32 0.84 1 HP-1002-16FO 1 15/16-12ORB 3.40 1.62 1.88 1.72 0.84 1 1/2 HP-1502-24FP 1 1/2-11 1/2 NPTF 4.06 2.25 2.63 .99 1.85 1 1/2 HP-1502-24FO 1 7/8-12 ORB 4.06 225 2.63 .99 1.85 * This dimension represents the portion that is exposed when the nipple is inserted into the mating Parker Coupler. Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-16 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics General Purpose Couplings 4000 Series Features Parker 4000 Series couplings feature: • Poppet valves available to prevent uncoupled leakage. • Ball valves available for rugged dependability in heavyduty hydraulic applications, within rated working pressures. • Critical parts are induction hardened for durability. • Dependable ball-locking mechanism holds the mating halves together. • Couplers and nipple are precision machined from solid bar stock. • For applications with residual trapped pressure use connect-under-pressure nipples designated by the -DC option. • The mating 8010 series nipples meet ISO 5675 requirements. Applications The 4000 Series brings to the industry a proven design for use on construction equipment, forestry equipment, agricultural machinery, oil tools, steel mill machinery, and other demanding hydraulic applications. Note: Protective dust plugs and caps play a crucial role in the life of a quick coupling and no purchase of a hydraulic quick coupling is complete without the selection of an appropriate dust plug and cap. See pages noted in Table of Contents for dust plugs and caps for the Parker full line of hydraulic couplings. Special Order Information Standard seal material is Nitrile, other seal options are available. See Ordering Information at end of Section B and Fluid Compatibility Chart at end of this catalog for assistance in making seal selection. Note: The part numbers for the 4000 Series Poppet Valve design are designated with a -P. For example 4050-4P. Performance 4000 Series (1/4″, 3/8″, 1/2″) Test Fluid: Oil – 200 SUS 0 10 20 30 40 50 60 70 0 2 4 6 8 10 12 14 16 18 Flow in USGPM Pressure Drop in PSID 1/4″ 3/8″ 1/2″ Specifications Body Size (in.) 1/4 3/8 1/2 3/4 1 Rated Pressure (PSI) 3000 3000 3000 3000 3000 Rated Flow (GPM) 3 6 12 28 50 Temperature Range (std seals) -40° to +250°F 4000 Series (3/4″ & 1″) Test Fluid: Oil – 200 SUS 0 10 20 30 40 50 60 70 80 90 0 10 20 30 40 50 60 70 Flow in USGPM Pressure Drop in PSID 3/4″ 1″ Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-17 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics General Purpose Couplings 4000 Series Nipples Female Thread Couplers Female Thread A C B E D F G Body Part Thread Thread Thread Dimensions (in.) Size No. Size Size Size Overall Exposed Hex Largest Wt. (LB.) (in.) Steel* NPTF ORB BSPP Length Length† Size Diameter P/Piece D E F G 1/4 4010-2P 1/4-18 – 1.39 0.71 0.75 0.87 0.08 1/4 4010-T6 – 9/16-18 1.49 0.81 0.75 0.87 0.09 3/8 4010-3P 3/8-18 – 1.50 .80 .94 1.08 0.16 1/2 8010-4 1/2-14 – 1.95 1.09 1.06 1.23 0.20 1/2 8010-4P 1/2-14 – 1.95 1.09 1.06 1.23 0.20 1/2 8010-5 3/4-14 – 2.14 1.28 1.25 1.44 0.25 1/2 8010-5P 3/4-14 – 2.14 1.28 1.25 1.44 0.25 1/2 8010-15 – 3/4-16 2.06 1.20 1.06 1.23 0.20 1/2 8010-15P – 3/4-16 2.06 1.20 1.06 1.23 0.20 1/2 8010-16 – 7/8-14 2.05 1.18 1.06 1.23 0.25 1/2 8010-16P – 7/8-14 2.05 1.18 1.06 1.23 0.25 1/2 8010-29BSPP – 1/2-14 1.95 1.09 1.06 1.18 0.25 3/4 4110-5 3/4-14 – 1.81 1.23 1.31 1.52 0.50 1 4010-6P 1-11 1/2 – 2.79 1.49 1.63 1.88 0.62 * P in part number designates Poppet design Replacement Parts – 4000 Series Body Size (in.) 1/4 3/8 1/2 3/4 1 O-Rings – Nitrile 50001-113-0260 50001-116-0260 50001-211-0260 50001-215-0010 50001-218-0260 Body Part Thread Thread Thread Dimensions (in.) Size No. Size Size Size Overall Wrench Largest Wt. (LB.) (in.) Steel* NPTF ORB BSPP Length Flats Diameter P/Piece A B C 1/4 4050-2P 1/4-18 – 2.18 0.88 1.06 0.24 1/4 4050-2P-T8M – 3/4-16 (Male) 1.80 0.88 1.06 0.21 1/4 4050-T6 – 9/16-18 2.18 0.88 1.06 0.27 1/4 4050P-T6** – 9/16-18 2.43 0.81 1.33 0.33 3/8 4050-3P 3/8-18 – 2.31 0.94 1.33 0.51 1/2 4050-4 1/2-14 – 2.60 1.06 1.52 0.58 1/2 4050-4P 1/2-14 – 2.60 1.06 1.52 0.58 1/2 4050-5 3/4-14 – 2.69 1.13 1.52 0.71 1/2 4050-5P 3/4-14 – 2.69 1.13 1.52 0.71 1/2 4050-15 – 3/4-16 2.81 1.06 1.52 0.64 1/2 4050-15P – 3/4-16 2.81 1.06 1.52 0.64 1/2 4050-16 – 7/8-14 2.75 1.06 1.52 0.59 1/2 4050-16P – 7/8-14 2.75 1.06 1.52 0.59 1/2 4050-29BSPP – – 1/2-14 2.68 1.06 1.52 0.59 3/4 4150-5 3/4-14 – 3.50 1.38 1.90 1.00 1 4050-6P 1-11 1/2 – 3.84 1.63 2.08 1.89 * P in part number designates Poppet design ** Push-to-Connect design. † This dimension represents the portion that is exposed when the nipple is inserted into the mating Parker Coupler. Connect-Under-Pressure E D F G Body Part Thread Thread Thread Dimensions (in.) Size No. Size Size Size Overall Exposed Hex Largest Wt. (LB.) (in.) Steel* NPTF ORB BSPP Length Length† Size Diameter P/Piece D E F G 1/2 8010-4P-DC 1/2-14 – – 1.81 1.09 1.06 1.16 0.20 1/2 8010-15P-DC – 3/4-16 – 1.81 1.09 1.06 1.16 0.20 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-18 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics General Purpose Couplings 4200 Series Features Parker 4200 Series couplings feature: • Double acting sleeve for one handed push-to-connect operation when coupler is clamp or bulkhead mounted. • Poppet valves available to prevent uncoupled leakage. • Ball valves available for rugged dependability in heavy-duty hydraulic applications, within rated working pressures. • Critical parts are induction hardened for durability. • Dependable ball-locking mechanism holds the mating halves together. • Couplers and nipple are precision machined from solid bar stock. • For applications with residual trapped pressure use connect-under-pressure nipples designated by the -DC option. Applications The 4200 Series brings to the industry a proven design for use on construction equipment, forestry equipment agricultural machinery, and oil tools. Note: Protective dust plugs and caps play a crucial role in the life of a quick coupling and no purchase of a hydraulic quick coupling is complete without the selection of an appropriate dust plug and cap. See pages noted in Table of Contents for dust plugs and caps for the Parker full line of hydraulic couplings. Special Order Information Standard seal material is Nitrile. For other seal options see Table of Contents. See Ordering Information at end of Section B and Fluid Compatibility Chart at end of this catalog for assistance in making seal selection. Note: The part numbers for the 4200 Series Poppet Valve design are designated with a -P. For example 4250-4P. Performance 4200 Series (3/8″ & 1/2″) Test Fluid: Oil – 200 SUS 0 10 20 30 40 50 60 70 80 0 2 4 6 8 10 12 14 16 18 Flow in USGPM Pressure Drop in PSID 3/8″ 1/2″ Specifications Body Size (in.) 3/8 1/2 Rated Pressure (PSI) 3000 3000 Rated Flow (GPM) 6 12 Temperature Range (std seals) -40° to +250°F Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-19 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics General Purpose Couplings 4200 Series Nipples Female Thread Couplers Female Thread E D F G Replacement Parts – 4200 Series Body Size (in.) Part Number Description Material 1/2 50001-211-0260 O-Rings Nitrile 3/8 50001-116-0260 O-Rings Nitrile A C B Body Part Thread Thread Dimensions (in.) Size No. Size Size Overall Exposed Hex Largest Wt. (LB.) (in.) Steel* NPTF ORB Length Length** Size Diameter P/Piece D E F G 3/8 4010-3P 3/8-18 – 1.60 0.80 0.94 1.08 0.16 1/2 8010-4 1/2-14 – 1.95 1.09 1.06 1.23 0.20 1/2 8010-4P 1/2-14 – 1.95 1.09 1.06 1.23 0.20 1/2 8010-15 – 3/4-16 2.06 1.20 1.06 1.23 0.20 1/2 8010-15P – 3/4-16 2.06 1.20 1.06 1.23 0.20 Body Part Thread Thread Dimensions (in.) Size No. Size Size Overall Wrench Largest Wt. (LB.) (in.) Steel* NPTF ORB Length Flats Diameter P/Piece A B C 3/8 4250-3P 3/8-18 – 2.31 0.81 1.31 0.39 1/2 4250-4 1/2-14 – 2.68 0.94 1.50 0.55 1/2 4250-4P 1/2-14 – 2.68 0.94 1.50 0.55 1/2 4250-15 – 3/4-16 2.68 0.94 1.50 0.55 1/2 4250-15P – 3/4-16 2.68 0.94 1.50 0.55 * P in part number designates Poppet design * P in part number designates Poppet design ** This dimension represents the portion that is exposed when the nipple is inserted into the mating Parker Coupler. Connect-Under-Pressure E D F G Body Part Thread Thread Thread Dimensions (in.) Size No. Size Size Size Overall Exposed Hex Largest Wt. (LB.) (in.) Steel* NPTF ORB BSPP Length Length** Size Diameter P/Piece D E F G 1/2 8010-4P-DC 1/2-14 – – 1.81 1.09 1.06 1.16 0.20 1/2 8010-15P-DC – 3/4-16 – 1.81 1.09 1.06 1.16 0.20 ** This dimension represents the portion that is exposed when the nipple is inserted into the mating Parker Coupler. Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-20 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics Non-Spill Couplings NS Series Features 1. Positive valve stop. The perch maintains valve alignment and provides metal to metal valve stop to ensure that the valves open fully, every time. 2. Captive valve seal assures “bubble tight” poppet sealing. The valve seal is positively captured by the metal poppet to minimize seal washout or damage from high velocity fluid. 3. Steel construction, Chromium-6 Free plated . Hardened nipples and sleeves and solid barstock construction for maximum resistance to damage from hydraulic and mechanical shock. 4. The seal is designed to withstand high pressures and provide reliable sealing. 1/2″ and above sizes feature PTFE back-up rings that support mating seals for high pressure applications. 5. Durable ball-locking assure reliable connection, every time. A large number of locking balls distribute the work load evenly while providing alignment and swiveling action to reduce hose torque and prolong hose life. CAUTION: these products are not to be used as swivels, rotation under pressure will result in excessive and premature wear. 6. Female pipe (NPSF), SAE O-Ring Boss and British pipe (BSPF) are available as standard. 7. Dry-Disconnect Series couplings employ flush valving when connecting or disconnecting. This means that the valves are mated together so that only small amounts of fluid can be lost during disconnection or air included during reconnection. 8. Sleeve locking mechanism prevents accidental disconnection when the coupling is dragged along the ground. Sleeve is rotated to engage the lock. The sleevelock feature is standard on this product. 5 8 7 6 4 2 3 1 Applications Non-Spill couplings by Parker are widely used in the public utility market where hydraulic oil spillage can constitute a serious safety hazard, particularly in overhead bucket hoists that are used for maintenance of high-voltage power transmission lines. These couplings are also used for quick change of hydraulic hand tools in the construction, railway maintenance and mining industries. They are also ideal for inplant use where excess oil spillage can create a hazard. Note: See pages noted in Table of Contents for dust plugs and caps for the Parker full line of hydraulic couplings. Performance Specifications Body Size (in.) 3/8 1/2 3/4 1 Rated Pressure (PSI) 2500 2500 2500 2500 Rated Flow (GPM) 10 12 30 50 Temperature Range (std seals) -40° to +250°F Spillage (ML) 0.020 0.070 0.150 0.220 (max. per disconnect) Air Incl. (ML) 0.010 0.020 0.050 0.070 (max. per disconnect) NS Series (3/8″& 1/2″) Test Fluid: Oil – 200 SUS 0 5 10 15 20 25 30 35 40 45 50 0 2 4 6 8 10 12 14 16 18 Flow in USGPM Pressure Drop in PSID 3/8″ 1/2″ NS Series (3/4″ & 1″) Test Fluid: Oil – 200 SUS 0 5 10 15 20 25 0 10 20 30 40 50 60 70 Flow in USGPM Pressure Drop in PSID 3/4″ 1″ Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-21 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics Non-Spill Couplings NS Series Couplers Nipples Optional Seals B A C D E F G Body Part Dimensions (in.) Size No. Thread Overall Hex Largest Wt. (LB.) (in.) Steel Size Length Size Diameter P/Piece A B C 3/8 NS-371-6FP 3/8-18 NPSF 2.10 1.06 1.13 0.36 3/8 NS-371-6FB G3/8 BSPP 2.10 1.06 1.13 0.38 3/8 NS-371-8FO 3/4-16UNF 2.20 1.06 1.13 0.40 1/2 NS-501-8FP 1/2-14 NPSF 2.88 1.25 1.56 0.80 1/2 NS-501-8FB G1/2 BSPP 2.95 1.25 1.56 0.74 1/2 NS-501-10FO* 7/8-14UNF 2.97 1.25 1.56 0.80 3/4 NS-751-12FP 3/4-14 NPSF 3.19 1.56 1.96 1.48 3/4 NS-751-12FB G3/4 BSPP 3.38 1.56 1.96 1.54 3/4 NS-751-12FO 1 1/16-12UN 3.51 1.56 1.96 1.58 1 NS-1001-16FP 1-11 1/2 NPSF 3.70 1.75 2.25 2.35 1 NS-1001-16FB G 1 BSPP 3.81 1.75 2.25 2.36 1 NS-1001-16FO 1 5/16-12UN 3.81 1.75 2.25 2.36 * Contact factory for Connect-Under-Pressure option availability in the 1/2” size. Body Part Dimensions (in.) Size No. Thread Overall Exposed* Hex Largest Wt. (LB.) (in.) Steel Size Length Length Size Diameter P/Piece D E F G 3/8 NS-372-6FP 3/8-18 NPSF 1.70 1.17 0.94 1.08 0.16 3/8 NS-372-6FB G3/8 BSPP 1.78 1.25 0.94 1.08 0.16 3/8 NS-372-8FO 3/4-16UNF 1.91 1.38 1.06 1.23 0.20 1/2 NS-502-8FP 1/2-14 NPSF 1.81 0.69 1.06 1.23 0.20 1/2 NS-502-8FB G1/2 BSPP 1.95 0.83 1.06 1.23 0.22 1/2 NS-502-10FO 7/8-14UNF 2.14 1.02 1.12 1.30 0.28 3/4 NS-752-12FP 3/4-14 NPSF 2.25 1.12 1.37 1.59 0.48 3/4 NS-752-12FB G3/4 BSPP 2.47 1.34 1.37 1.59 0.54 3/4 NS-752-12FO 1 1/16-12UN 2.62 1.49 1.37 1.59 0.65 1 NS-1002-16FP 1-11 1/2 NSPF 2.64 1.54 1.62 1.88 0.72 1 NS-1002-16FB G 1 BSPP 2.78 1.68 1.62 1.88 0.74 1 NS-1002-16FO 1 5/16-12UN 2.87 1.77 1.62 1.88 0.80 Optional Seals Suffix E4 Fluorocarbon E5 Ethylene Propylene (EPR) E35 Perfluoroelastomer (Contact factory for Seal options) * This dimension represents the portion that is exposed when the nipple is inserted into the mating Parker Coupler. Standard Port Configurations FP – Female Pipe Thread FO – Female Straight Thread FB – Female British Standard Pipe Parallel Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-22 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics Non-Spill Adapters Applications Parker Non-Spill Adapters were designed due to the widespread use of several coupling types in the construction market. These adapters help the user adapt between poppet style couplings and non-spill type couplings. Adapters are widely available with Parker FEM and FF Series to Parker 6600 Series coupling connections. This product is especially useful where multiple hydraulic attachments are being used with skid steer loaders. Materials Of Construction Body: Steel Finish: Chromium-6 Free plating Performance Specifications Body Size (in.) 1/2 Rated Pressure (PSI) – EAS/SAE 3625 Temperature Range -40° to + 250°F Max Spillage Per Disconnect (ml.) .020 (Flush Face End) Max Air Inclusion Upon Connect (ml.) .070 (Flush Face End) Rated Flow (GPM) 12 Adapter Part Number 1/2″ Body Size Male Half of Adapter Adapter Series E – FEM Series (ISO 16028 Standard) S – 6600 Series Female Half of Adapter E – FEM Series (ISO 16028 Standard) S – 6600 Series E A S – 500 FEM/FF to 6600 Adapter (1/2″) Test Fluid: Oil – 200 SUS 0 10 20 30 40 50 60 0 2 4 6 8 10 12 14 16 18 Flow in USGPM Pressure Drop in PSID 1/2″ How To Order Body Part Thread Overall Hex Largest Size Number Size Length Size Diameter A B C 1/2 EAS-500 NA 3.364 1.380 1.50 1/2 SAE-500 NA 3.000 1.250 1.48 EAS-500 SAE-500 Adapters A B C A B C Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-23 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics Non-Spill Couplings FF Series 1 2 3 4 7 8 6 5 Features 1. Sleeve locking mechanism is engaged by rotating sleeve after connection. It prevents accidental disconnection when, for example, the coupling is dragged along the ground during use. 2. Sleeve mechanism is designed to help prevent dirt from entering the internal mechanism and thus causing faulty operation when connecting or disconnecting. The sleeve covers the retaining ring and also incorporates a dust seal in the spring area. 3. Steel construction, with Chromium-6 Free plating. Hardened nipples and sleeves and solid barstock construction for maximum resistance to damage from hydraulic and mechanical shock. 4. The blow-out resistant seal is designed to prevent damage during severe service conditions. 5. Durable ball-locking mechanism assures reliable connections, every time. A large number of locking balls distributes the work load evenly while providing alignment and swiveling action to reduce hose torque and prolong hose life. CAUTION: These products are not to be used as swivels. Rotation under pressure will result in excessive and premature wear. 6. Female pipe (NPSF), British pipe (BSPP) and SAE O-Ring Boss are available as standard. 7. FF Series couplings employ flush valving when connecting or disconnecting. This means that the valves are mated together so that only small amounts of fluid can be lost during disconnection or air inclusion during reconnection. 8. The 3/8″ size conforms to HTMA (Hydraulic Tool Manufactures Association) standards. All sizes incorporate flush face mating surfaces which greatly facilitate cleaning of the product when disconnected. HTMA couplings (3/8″ only)-coupler and nipple are marked with a directional flow arrow as per specifications. However, couplings are bi-directional. Applications Parker FF Series couplings are widely used in the public utility market where hydraulic oil spillage can constitute a serious safety hazard, particularly in overhead bucket hoists that are used for maintenance of high-voltage power transmission lines. These couplings are also used for quick change of hydraulic tools in construction, railway maintenance and mining industries. The ease of cleaning makes them ideal for use in these types of hostile environments. Note: See pages noted in Table of Contents for dust plugs and caps for the Parker full line of hydraulic couplings. FF Series (1/4″, 3/8″, 1/2″) Test Fluid: Oil – 200 SUS 0 5 10 15 20 25 0 2 4 6 8 10 12 14 16 18 Flow in USGPM Pressure Drop in PSID 1/4″ 3/8″ 1/2″ Performance Specifications Body Size (in.) 1/4 3/8 1/2 3/4 1 Rated Pressure (PSI) 5000 3000 3000 3000 3000 Rated Flow (GPM) 3 6 12 28 50 Temperature Range -40° to + 250°F Spillage (ML) .015 .015 .020 .150 .200 (max. per disconnect) Air Inclusion (ML) .020 .020 .070 .100 .150 (max. per connect) FF Series (3/4″ & 1″) Test Fluid: Oil – 200 SUS 0 5 10 15 20 25 30 35 40 45 0 10 20 30 40 50 60 70 Flow in USGPM Pressure Drop in PSID 3/4″ 1″ Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-24 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics Non-Spill Couplings FF Series Couplers Body Part Dimensions (in.) Size No. Thread Overall Exposed* Hex Largest Wt. (LB.) (in.) Steel Size Length Length Size Diameter P/Piece D E F G 1/4 FF-252-4FP 1/4-18 NPSF 1.66 1.15 1.00 1.06 0.16 1/4 FF-252-4MP 1/4-18 NPTF 1.72 1.18 1.00 1.06 0.26 1/4 FF-252-6FO 9/16-18 UNF 1.66 1.15 1.00 1.06 0.16 3/8 FF-372-6FP 3/8-18 NPSF 2.31 1.71 0.94 1.08 0.26 3/8 FF-372-8FP 1/2-14 NPSF 2.64 2.04 1.06 1.19 0.32 3/8 FF-372-6FB G3/8 BSPP 2.45 1.86 0.94 1.08 0.28 3/8 FF-372-8FB G1/2 BSPP 2.70 2.16 1.06 1.19 0.32 3/8 FF-372-8FO 3/4-16 UNF 2.70 2.16 1.06 1.19 0.30 1/2 FF-502-8FP 1/2-14 NPSF 2.75 2.11 1.12 1.30 0.42 1/2 FF-502-10FO 7/8-14 UNF 2.97 2.29 1.12 1.30 0.44 3/4 FF-752-12FP 3/4-14 NPSF 3.38 2.47 1.50 1.73 1.00 3/4 FF-752-12FO 1 1/16-12 UNF 3.58 2.64 1.50 1.73 1.02 1 FF-1002-16FP 1-11 1/2NPSF 3.85 2.60 1.87 2.17 1.60 1 FF-1002-16FO 1 5/16-12UNF 3.85 2.60 1.87 2.17 1.70 Nipples Optional Seals C A B G F E D Body Part Dimensions (in.) Size No. Thread Overall Hex Largest Wt. (LB.) (in.) Steel Size Length Size Diameter P/Piece A B C 1/4 FF-251-4FP 1/4-18 NPSF 1.79 1.00 1.06 0.23 1/4 FF-251-4MP 1/4-18 NPTF 1.84 1.00 1.06 0.24 1/4 FF-251-6FO 9/16-18 UNF 1.91 1.00 1.06 0.23 3/8 FF-371-6FP 3/8-18 NPSF 2.39 1.06 1.20 0.44 3/8 FF-371-8FP 1/2-14 NPSF 2.80 1.06 1.20 0.50 3/8 FF-371-6FB G3/8 BSPP 2.45 1.06 1.20 0.45 3/8 FF-371-8FB G1/2 BSPP 2.80 1.06 1.20 0.48 3/8 FF-371-8FO 3/4-16 UNF 2.82 1.06 1.20 0.52 1/2 FF-501-8FP 1/2-14 NPSF 2.67 1.37 1.58 0.88 1/2 FF-501-10FO 7/8-14 UNF 2.89 1.37 1.58 1.05 3/4 FF-751-12FP 3/4-14 NPSF 3.50 1.75 1.94 1.84 3/4 FF-751-12FO 1 1/16-12 UNF 3.75 1.75 1.94 1.93 1 FF-1001-16FP 1-11 1/2NPSF 4.14 1.87 2.25 2.64 1 FF-1001-16FO 1 5/16-12UNF 4.24 1.87 2.25 2.68 1/4″ Nipple 3/8″ Nipple 1/2″ Nipple 3/4″ Nipple 1″ Nipple 1/4″ Coupler 3/8″ Coupler 1/2″ Coupler 3/4″ Coupler 1″ Coupler FF-252-KIT FF-372-KIT FF-502-KIT FF-752-KIT FF-1002-KIT FF-251-KIT N/A N/A FF-751-KIT FF-1001-KIT FF-252-KIT-E4 FF-372-KIT-E4 FF-502-KIT-E4 FF-752-KIT-E4 FF-1002-KIT-E4 FF-251-KIT-E4 N/A N/A FF-751-KIT-E4 FF-1001-KIT-E4 FF-252-KIT-E5 FF-372-KIT-E5 FF-502-KIT-E5 FF-752-KIT-E5 FF-1002-KIT-E5 FF-251-KIT-E5 N/A N/A FF-751-KIT-E5 FF-1001-KIT-E5 FF/FS-251-TOOL N/A N/A FF/FS-751-TOOL FF/FS-1001-TOOL Optional Seals Suffix* – E4 Fluorocarbon – E5 Ethylene Propylene (EPR) – E35 Perfluoroelastomer (Contact Factory for Seal Options). * This dimension represents the portion that is exposed when the nipple is inserted into the mating Parker Coupler. * Optional seals include O-ring & Back-Up Ring, not Anti-Blow Out bonded seal. FF Series Repair Kits Standard Port Configurations FP – Female Pipe Thread MP – Male Pipe Thread FO – Female Straight Thread FB – Female British Standard Pipe Parallel Body Size (in.) 1/4 3/8 1/2 5/8 3/4 1 Rated Pressure (PSI) 4568 3625 3625 3625 3625 2900 Rated Flow (GPM) 3 6 12 20 26 50 Temperature Range (std.seals) -40 to +250° F Spillage (ML) 0.015 0.015 0.020 0.030 0.150 0.200 (max. per disconnect) Air Inclusion (ML) 0.020 0.020 0.070 0.070 0.100 0.150 (max. per connect) FEM Series FEM Series (1/4″, 3/8″, 1/2″) Test Fluid: Oil – 150 SUS 0 5 10 15 20 25 30 0 2 4 6 8 10 12 14 16 18 Flow in USGPM Pressure Drop in PSID 1/4″ 3/8″ 1/2″ Quick Coupling Division 8145 Lewis Road Minneapolis, MN Performance B-25 Features • Meets or exceeds ISO 16028 specification design and test requirements. • Wider size variations and increased pressures. • ISO-16028 Interface for universal interchangeability. • Modular design for increased flexibility with fitting port options. • Brinell relief on male half to increase life and resist wear. • Induction hardened locking surface to resist brinelling, damage and abuse. • Heat Treated components to resist scratches and wear. • Smooth flow path for low pressure drop. • Heavy locking collar to resist damage and abuse. • Blow-out resistant seal on male half seal prevents damage and premature failure with residual system pressure. • Push-to-connect locking mechanism. • Sleeve lock is a non-standard item. FEM Series couplings are designed to meet the stringent design and pressure requirements of ISO 16028. The FEM modular design also facilitates wider variations in fitting options. Parker FEM couplers are designed for use in the construction, utility and agricultural equipment markets. As with all Parker flush-face designs the non-spill feature eliminates hydraulic spillage and air inclusion when connecting or disconnecting hydraulic attachments. The FEM Series is also ideal for many other applications where hydraulic spillage is a concern and global interchangeability with other manufacturers is important. Materials of Construction Body: Steel Finish: Chromium-6 Free plating Valve: Flush face valving Seal: Polyurethane or Nitrite; size dependant Non-Spill Couplings FEM Series Specifications B Hydraulics FEM Series (5/8″, 3/4″, 1″) Test Fluid: Oil – 150 SUS 0 5 10 15 20 25 30 35 40 45 50 0 10 20 30 40 50 60 70 Flow in USGPM Pressure Drop in PSID 5/8″ 3/4″ 1″ B-26 FEM Series Couplers B A C Nipples F D G E Body Size Part Thread Overall Hex Largest Wt. (LB) (in.) Number Size Length Size Diameter P/Piece A B C 1/4 FEM-251-4FP-NL .250-18 NPSF 1.96 1.00 1.06 0.25 1/4 FEM-251-6FO-NL .562-18 UNF 2.08 1.00 1.06 0.25 3/8 FEM-371-6FP-NL .375-18 NPSF 2.89 1.06 1.19 0.51 3/8 FEM-371-8FO-NL .750-16 UNF 2.89 1.06 1.19 0.51 1/2 FEM-501-8FP-NL .500-14 NPSF 3.04 1.06 1.58 0.93 1/2 FEM-501-8FO-NL .750-16 UNF 2.96 1.25 1.58 0.93 1/2 FEM-501-10BMS-NL 1.000-14 UNS 4.02 1.38 1.58 0.95 1/2 FEM-501-10BMF-NL .875-14 UNF 4.03 1.38 1.58 0.93 1/2 FEM-501-10FO-NL .875-14 UNF 3.04 1.25 1.58 0.93 1/2 FEM-501-12FO-NL 1.062-12 UN 3.24 1.38 1.58 0.93 5/8 FEM-621-12FO-NL 1.062-12 UNF 3.70 1.50 1.70 1.40 3/4 FEM-751-12FP-NL .750-14 NPSF 3.95 1.75 1.95 2.04 3/4 FEM-751-12FO-NL 1.062-12 UNF 3.95 1.75 1.95 2.04 1 FEM-1001-16FP-NL 1.000-11.5 NPSF 4.21 2.00 2.25 2.70 1 FEM-1001-16FO-NL 1.312-12 UNF 4.21 2.00 2.25 2.70 Body Size Part Thread Overall Exposed Hex Largest Wt. (LB) (in.) Number Size Length Length* Size Diameter P/Piece D E F G 1/4 FEM-252-4FP .250-18 NPSF 1.71 1.25 1.00 1.06 0.17 3/8 FEM-372-6FP .375-18 NPSF 2.48 1.83 1.06 1.16 0.32 3/8 FEM-372-8FO .750-16 UNF 2.48 1.83 1.06 1.16 0.32 1/2 FEM-502-8FP .500-14 NPSF 2.85 2.15 1.38 1.50 0.54 1/2 FEM-502-10FO .875-14 UNF 2.85 2.15 1.38 1.50 0.54 1/2 FEM-502-10BMS 1.000-14 UNS 3.84 3.14 1.38 1.50 0.56 1/2 FEM-502-10BMF .875-14 UNF 3.85 3.15 1.38 1.50 0.54 1/2 FEM-502-12FO 1.062-12 UN 3.05 2.35 1.38 1.50 0.54 5/8 FEM-622-12FO 1.062-12 UN 3.09 2.39 1.50 1.65 0.76 3/4 FEM-752-12FP .750-14 NPSF 3.38 2.46 1.75 1.94 1.12 3/4 FEM-752-12FO 1.062-12 UN 3.38 2.46 1.75 1.94 1.12 1 FEM-1002-16FP 1.000-11.5 NPSF 3.85 2.93 2.00 2.25 1.72 1 FEM-1002-16FO 1.312-12 UN 3.85 2.93 2.00 2.25 1.72 Standard Port Configurations FP – Female Pipe Thread FO – Female Straight Thread BMF- Bulkhead Male Flare 37° JIC BMS – Bulkhead Male Seal-lok Other Fitting Port Configurations available upon request. Quick Coupling Division 8145 Lewis Road Minneapolis, MN Non-Spill Couplings FEM Series * This dimension represents the portion that is exposed when the nipple is inserted into the mating Parker Coupler. B Hydraulics Specifications Body Size (in.) 3/8 1/2 3/4 Rated Pressure (PSI) 3000 3000 3000 Rated Connect-Under-Pressure Capability 3000 3000 1500 Rated Flow (GPM) 6 12 26 Spillage (ML) .015 .020 .015 (max. per disconnect) Air Inclusion (ML) .020 .070 .100 (max. per connect) Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-27 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics Non-Spill Couplings FC Series (Connect-Under-Pressure) Note: Protective dust plugs and caps play a crucial role in the life of a quick coupling and no purchase of a hydraulic quick coupling is complete without the selection of an appropriate dust plug and cap. See pages noted in Table of Contents for dust plugs and caps for the Parker full line of hydraulic couplings. Performance Features • Connect-Under-Pressure nipple only. • Hardened locking surface. • Steel construction, Chromium-6 Free plating for corrosion resistance. • Blow-out resistant seal in male nipple. • Flush Face Valving Applications Parker FC Series nipple provides connect-under-pressure capability with up to 3000 PSI of trapped pressure in the nipple and are ideal for applications where residual pressure makes reconnect difficult. Utilized primarily in the construction equipment market, FC Series products are commonly found on hydraulic attachments used in skid steer applications. The FC Series mates with the FF Series Parker interface. Description FC Series products operate slightly different from traditional non-spill couplings. With no pressure in the coupler and up to 3000 PSI of trapped pressure in the nipple, begin to couple the mating halves. Delay momentarily during connection to allow trapped pressure to equalize with the mating half before completing the connection. FC Series (3/8″, 1/2″, 3/4″) Test Fluid: Oil – 200 SUS 0 10 20 30 40 50 60 0 5 10 15 20 25 30 35 40 Flow in USGPM Pressure Drop in PSID 3/8″ 1/2″ 3/4″ D E G F Nipples Standard Port Configurations FP – Female Pipe Thread FO – Female Straight Thread Body Part Dimensions (in.) Size No. Mating Thread Overall Exposed Hex Largest Wt. (LB.) (in.) Steel Half Size Length Length Size Diameter P/Piece D E F G 3/8 FC-372-6FP FF-371 3/8-18 NPSF 3.30 2.58 1.062 1.16 0.45 3/8 FC-372-8FO FF-371 3/4-16 UNF 3.30 2.58 1.062 1.16 0.42 3/8 FC-372-8FP FF-371 1/2-14 NPSF 3.30 2.58 1.062 1.16 0.42 1/2 FC-502-8FP FF-501 1/2-14 NPSF 3.46 2.65 1.125 1.22 0.53 1/2 FC-502-10FO FF-501 7/8-14 UNF 3.46 2.65 1.125 1.22 0.52 3/4 FC-752-12FO FF-751 1 1/16-12 UNF 4.81 3.72 1.500 1.65 1.32 3/4 FC-752-12FP FF-751 3/4-14 NPSF 4.81 3.72 1.500 1.65 1.34 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-28 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics Non-Spill Couplings FEC Series (Connect-Under-Pressure) Note: Protective dust plugs and caps play a crucial role in the life of a quick coupling and no purchase of a hydraulic quick coupling is complete without the selection of an appropriate dust plug and cap. See pages noted in Table of Contents for dust plugs and caps for the Parker full line of hydraulic couplings. Performance Features • Connect-Under-Pressure nipple. • Hardened locking surface. • Steel construction, Chromium-6 Free plating for corrosion resistance. • Anti blowout Nitrile/PTFE bonded nipple seal. • Flush face valving. Applications Parker FEC Series nipple provide connect-under-pressure capability with up to 3000 PSI of trapped pressure in the nipple and are ideal for applications where residual pressure makes reconnect difficult. Utilized primarily in the construction equipment market, FEC Series products are commonly found on hydraulic attachments used in skid steer applications. The FEC Series mates with the FEM Series interface ISO 16028 couplers. Description FEC Series products operate slightly different from traditional non-spill couplings. With no pressure in the coupler and up to 3000 PSI of trapped pressure in the nipple, begin to couple the mating halves. Delay momentarily during connection to allow trapped pressure to equalize with the mating half before completing the connection. FEC Series (1/2″, 5/8″, 3/4″) Test Fluid: Oil – 200 SUS 0 10 20 30 40 50 60 70 80 0 10 20 30 40 Flow in USGPM Pressure Drop in PSID 1/2″ 5/8″ 3/4″ D E G F Nipples Specifications Body Size (in.) 1/2 5/8 3/4 Rated Pressure (PSI) 3625 3625 3625 Rated Connect-Under-Pressure Capability 3000 1700 1500 Rated Flow (GPM) 12 20 26 Spillage (ML) 0.020 0.03 0.150 (max. per disconnect) Air Inclusion (ML) 0.070 0.070 0.100 (max. per connect) Body Part Dimensions (in.) Size No. Mating Thread Overall Exposed Hex Largest Wt. (LB.) (in.) Steel Half Size Length Length Size Diameter P/Piece D E F G 1/2 FEC-502-8FP FEM-501 1/2-14 NPSF 3.50 2.68 1.125 1.22 1/2 FEC-502-10FO FEM-501 7/8-14 UNF 3.50 2.68 1.125 1.22 1/2 FEC-502-12FO FEM-501 1 1/16-12 UNF 3.79 2.97 1.500 1.65 5/8 FEC-622-12FO FEM-621 1 1/16-12 UN 4.19 3.39 1.500 1.65 3/4 FEC-752-12FO FEM-751 1 1/16-12 UN 4.84 3.76 1.500 1.65 Standard Port Configurations FP – Female Pipe Thread FO – Female Straight Thread Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-29 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics Non-Spill Couplings FH Series Features • 10,000 PSI operating pressure (700 bar). • Flush face, non-spill valving, both halves. • Sleeve on coupler and nipple body have a RED finish for identification purposes. • Simple Push-To-Connect operation. • Sleeve-Lock to prevent accidental disconnect. • Non interchangeable with low pressure flush face couplings. • Meets performance and dimensional specifications of HTMA requirements, 10,000 PSI (700 bar). • Anti Blow-Out Nitrile/PTFE bonded nipple seal. Applications • Hydraulic Crimpers, Cutters, Jacks, Benders, Clamps, Wedges • Rescue Equipment • High Pressure Test Equipment Note: Protective dust plugs and caps play a crucial role in the life of a quick coupling and no purchase of a hydraulic quick coupling is complete without the selection of an appropriate dust plug and cap. See pages noted in Table of Contents for dust plugs and caps for the Parker full line of hydraulic couplings. Performance FH Series (3/8″) Test Fluid: Oil – 200 SUS 0 5 10 15 20 25 30 35 40 45 0 1 2 3 4 5 6 7 8 9 Flow in USGPM Pressure Drop in PSID 3/8″ Description Parker FH Series high pressure couplings are an innovative product combining the advantages of a flush-face design with a highly technical performance of a rated pressure of 10,000 PSI. For safety purposes, this product does not interchange with flush-face couplings having a lower pressure rating. Specifications Body Size (in.) 3/8 Rated Pressure (PSI) 10,000 Rated Flow (GPM) 6 Temperature Range -40° to +250° F Spillage (ML) .020 (max. per disconnect) Air Inclusion (ML) .070 (max. per connect) Materials of Construction Body: Steel Finish: Chromium-6 Free plating Valve: Flush Face Valves Seal: Anti blow-out Nitrile/PTFE bonded seal ( nipple only) Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-30 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics Non-Spill Couplings FH Series C B A E D F Couplers Nipples Body Part Dimensions (in.) Size No. Thread Overall Wrench Largest Wt. (LB.) (in.) Steel Size Length Flats Diameter P/Piece A B C 3/8 FH-371-6FP 3/8 -18 NPTF 2.63 1.12 1.23 0.44 3/8 FH-371-6MP 3/8 -18 NPTF 2.85 1.12 1.23 0.45 3/8 FH-371-6FB G3/8 -BSPP 2.55 1.12 1.23 0.45 Body Part Dimensions (in.) Size No. Thread Overall Wrench Largest Wt. (LB.) (in.) Steel Size Length Flats Diameter P/Piece D E F 3/8 FH-372-6FP 3/8-18 NPTF 2.12 1.00 1.23 0.26 3/8 FH-372-6FB G3/8 -BSPP 2.12 1.00 1.23 0.28 Standard Port Configurations FP – Female Pipe Thread MP -Male Pipe Thread FB – Female British Standard Parallel Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-31 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics Non-Spill Couplings FS Series Note: Protective dust plugs and caps play a crucial role in the life of a quick coupling and no purchase of a hydraulic quick coupling is complete without the selection of an appropriate dust plug and cap. See pages noted in Table of Contents for dust plugs and caps for the Parker full line of hydraulic couplings. Applications Parker FS Series couplings virtually eliminate fluid loss upon disconnection, and minimize air inclusion during connections. They are ideal for use where spillage may cause undesirable conditions or constitute a safety hazard. The FS Series couplings have double shut-off flush mating valves that are suitable for sealing off media in chemical processing, chemical dispensing, food processing, and other corrosive applications.Working pressures to 2000 PSI. Features • Simple to operate: Push to connect, pull on knurled sleeve to disconnect. • Flush face valves exhibit minimal spillage upon disconnect and minimal air inclusion upon connect. • Superior locking ball design – a large number of locking balls distribute the workload better and allow for some rotation between the male and female halves of the coupling under pressure. • Excellent flow vs pressure drop characteristics when compared with other low spill quick couplings. • Material construction is 316 stainless steel with fluorocarbon seals as standard. • Wide range of seal materials available. • Repair kits available to replace critical elastomer seals (all sizes). Materials of Construction Machined Parts: Stainless Steel, AISI type 316 Springs: Stainless Steel, AISI type 316. Locking Balls: 1/4″ – 302 SS; 3/8″ – 1″ – Tungsten Carbide Backup Washers: PTFE Elastomer Seals: Fluorocarbon is standard. Wide range is available. Performance Flow Data FS Series (1/4″, 3/8″, 1/2″) Test Fluid: Water 0 5 10 15 20 25 30 0 2 4 6 8 10 12 14 16 18 Flow in USGPM Pressure Drop in PSID 1/4″ 3/8″ 1/2″ Specifications Body Size (in.) 1/4 3/8 1/2 3/4 1 Rated Pressure (PSI) 2000 2000 2000 2000 2000 Rated Flow (GPM) 3 6 12 28 50 Spillage (ML) .015 .015 .020 .150 .250 (max. per disconnect) Air Inclusion (ML) .010 .020 .070 .100 .182 (max. per connect) CV 0.9 1.8 3.0 7.0 10.1 Temperature Range (continuous) Part No. Seal Temp°F Seal Suffix Compound Rating None* Fluorocarbon -15 to 400 E5 Ethylene Propylene (EPR) -65 to 300 E1 Nitrile -40 to 250 E35 Perfluoroelastomer (Contact Factory) -20 to 600 *Fluorocarbon is standard seal. FS Series (3/4″ & 1″) Test Fluid: Water 0 5 10 15 20 25 30 35 0 10 20 30 40 50 60 70 Flow in USGPM Pressure Drop in PSID 3/4″ 1″ Replacement Seals No Suffix Fluorocarbon Seals E5 Ethylene Propylene (EPR) E35 Perfluoroelastomer (Contact the Factory) Coupler Repair Kits 1/4″ Coupler 3/8″ Coupler 1/2″ Coupler 3/4″ Coupler 1″ Coupler N/A FS-371-KIT FS-501-KIT FS-751-KIT FS-1001-KIT N/A FS-371-KIT-E5 FS-501-KIT-E5 FS-751-KIT-E5 FS-1001-KIT-E5 N/A FF/FS-371-TOOL FS-501-TOOL FF/FS-751-TOOL FF/FS-1001-TOOL Nipple Repair Kits 1/4″ Nipple 3/8″ Nipple 1/2″ Nipple 3/4″ Nipple 1″ Nipple FS-252-KIT FS-372-KIT FS-502-KIT FS-752-KIT FS-1002-KIT FS-252-KIT-E5 FS-372-KIT-E5 FS-502-KIT-E5 FS-752-KIT-E5 FS-1002-KIT-E5 FS Series Repair Kits Repair kits are available for both coupler and nipple half of FS coupling. Kits include replacement elastomer seals, valve assembly and instructions to perform rebuild. Spline tool must be ordered separately to accomplish coupler half repair. Other tools required: Vise, Allen Wrench and Open End Wrench. TOOL Spline tool for Coupler Repair FS Repair Kits Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-32 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics Nipples Female Pipe Thread E G F D Non-Spill Couplings FS Series Couplers Female Pipe Thread A B C Body Part Thread Overall Hex Largest Wt. (LB.) Size (in.) No. Size Length Size Diameter P/Piece A B C 1/4 FS-251-4FP 1/4-18 NPT 1.79 1.00 1.06 0.25 1/4 FS-251-4MP 1/4-18 NPTF 2.00 1.00 1.06 0.25 1/4 FS-251-6FO 9/16-18UNF 1.92 1.00 1.06 0.24 3/8 FS-371-6FP 3/8-18 NPT 2.52 1.06 1.30 0.58 3/8 FS-371-8FO 3/4-16 UNF 2.83 1.12 1.30 0.63 1/2 FS-501-8FP 1/2-14 NPT 2.74 1.38 1.58 0.92 1/2 FS-501-10FO 7/8-14 UNF 2.86 1.38 1.58 0.96 3/4 FS-751-12FP 3/4-14 NPT 3.63 1.75 1.99 2.00 3/4 FS-751-12FO 1-1/16-12 UNF 3.73 1.75 1.99 2.12 1 FS-1001-16FP 1-11 1/2 NPT 4.14 1.87 2.25 2.76 1 FS-1001-16FO 1-5/16-12 UNF 4.24 1.87 2.25 2.80 Body Part Thread Overall Exposed Hex Largest Wt. (LB.) Size (in.) No. Size Length Length Size Diameter P/Piece D E F G 1/4 FS-252-4FP 1/4-18 NPT 1.66 1.14 1.00 1.06 0.18 1/4 FS-252-4MP 1/4-18 NPT 1.87 1.34 1.00 1.06 0.18 1/4 FS-252-6FO 9/16-18 UNF 1.66 1.26 1.00 1.06 0.17 3/8 FS-372-6FP 3/8-18 NPT 2.31 1.71 .94 1.08 0.26 3/8 FS-372-8FO 3/4-16 UNF 2.45 1.71 1.06 1.19 0.30 1/2 FS-502-8FP 1/2-14 NPT 2.75 2.11 1.12 1.30 0.44 1/2 FS-502-10FO 7/8-14 UNF 2.85 2.03 1.12 1.30 0.48 3/4 FS-752-12FP 3/4-14 NPT 3.38 2.47 1.50 1.73 1.02 3/4 FS-752-12FO 1-1/16-12 UNF 3.38 2.27 1.50 1.73 1.14 1 FS-1002-16FP 1-11 1/2 NPT 3.89 2.60 1.87 2.17 1.60 1 FS-1002-16FO 1-5/16 12 UNF 3.89 2.51 1.87 2.17 1.64 Standard Port Configurations FP – Female Pipe Thread MP – Male Pipe Thread FO – Female Straight Thread Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-33 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics Connect Under Pressure Couplings 6100 Series Applications Parker’s 6100 Series, is a thread-to-connect low spill coupling that can be used in a wide range of industrial applications where connected under pressure is required. The 6100 is ideal for connecting hydraulic lines on oil field equipment like power tongs, swivels and mobile drilling rigs. It is also widely used on dump trailers to connect the tractor to wet-line hydraulic systems. The 6100 Series is suitable for many applications where high flow connect under pressure couplings are required. Other uses include: submersible pumps, engine test stands, and bulk liquid CO2 transfer (Special part numbers apply – contact the Division). Note: Protective dust plugs and caps play a crucial role in the life of a quick coupling and no purchase of a hydraulic quick coupling is complete without the selection of an appropriate dust plug and cap. See pages noted in Table of Contents for dust plugs and caps for the Parker full line of hydraulic couplings. Performance 6100 Series (1/2″ & 3/4″) Test Fluid: OIL 150 SUS 0 10 20 30 40 50 60 70 80 90 100 0 5 10 15 20 25 30 35 40 Flow in USGPM Pressure Drop in PSID 1/2″ 3/4″ Specifications Body Size (in.) 3/4 3/4 1 1-1/4 1-1/2 Dash Number -08 -12 -16 -20 -24 *Rated Pressure (PSI) Female Half 3000 3000 3000 2750 2000 Male Half 3000 3000 3000 2500 2500 Complete Coupling Assembly 3000 3000 3000 2750 2500 Rated Flow (GPM) 12 28 50 76 100 Temperature Range (std seals) -40° to +250°F. * Minimum burst pressure is equal to three times the rated pressure. Not recommended for continuous hydraulic impulse applications at rated pressures. 6100 Series (1″, 1-1/4″, 1-1/2″) Test Fluid: OIL 150 SUS 0 10 20 30 40 50 60 70 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 Flow in USGPM Pressure Drop in PSID 1-1/2″ 1-1/4″ 1″ Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-34 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics Connect Under Pressure Couplings 6100 Series 2 4 6 5 6 3 1 Features 1. The connection indicator, a Parker innovation, serves as a visual check for complete connection of the 6100 coupling. It helps prevent premature failures and leaks. It assures that the connection is complete and the valves fully open, eliminating unnecessary flow restriction. (see drawing on next page) 2. The Parker heavy-duty wing nut is ruggedly builtspecifically to withstand the hammer blows commonly used to tighten and loosen this coupler. 3. The flange is designed to give a positive “no-slip” bulkhead mounting to reduce downtime. 4. The bonded valve seal permits full pressure connect and disconnect—without seal washout. 5. The flush face valve keeps air inclusion and spillage to a minimum. 6. Corrosion resistant brass body makes this coupling compatible with a broad range of media and provides versatility. 6100 Series Coupling with Wingnut 6100 Series Coupling with Hex Nut A A Body Thread Part No. Part No. Overall Wt. (LB.) Size Size With Without Connected P/Piece (in.) NPTF Flange Flange Length A 3/4 1/2-14 6100-08 6120-08 5.20 2.12 3/4 3/4-14 6100-12 6120-12 5.20 3.27 1 1-11 1/2 6100-16 6120-16 5.99 3.19 1 1/4 1 1/4-11 1/2 6100-20 6120-20 6.33 2.73 1 1/2 1 1/2-11 1/2 6100-24 6120-24 6.55 3.52 Body Thread Part No. Part No. Overall Wt. (LB.) Size Size With Without Connected P/Piece (in.) NPTF Flange Flange Length A 3/4 1/2-14 6110-08 6130-08 5.20 1.89 3/4 3/4-14 6110-12 6130-12 5.20 1.83 1 1-11 1/2 6110-16 6130-16 5.99 2.93 1 1/4 1 1/4-11 1/2 6110-20 6130-20 6.33 4.12 1 1/2 1 1/2-11 1/2 6110-24 6130-24 6.55 5.95 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-35 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics Connect Under Pressure Couplings 6100 Series Couplers Wing Nut Hex Nut Nipples Flanges G H A B C A B C D F G Connection Indicator Line Body Part Thread Dimensions (in.) Size No. Size Overall Wrench Wing Wt. (LB.) (in.) Brass NPTF Length Flats Nut P/Piece A B C 3/4 6125-08 1/2-14 3.22 1.16 4.06 1.30 3/4 6125-12 3/4-14 3.22 1.16 4.06 1.26 1 6125-16 1-11 1/2 3.87 1.43 4.38 1.89 1 1/4 6125-20 1 1/4-11 1/2 4.16 1.78 5.20 2.84 1 1/2 6125-24 1 1/2-11 1/2 4.34 2.00 5.32 3.72 Body Part Thread Dimensions (in.) Size No. Size Overall Wrench Hex Wt. (LB.) (in.) Brass NPTF Length Flats Size P/Piece A B C 3/4 6135-08 1/2-14 3.22 1.16 1.75 1.07 3/4 6135-12 3/4-14 3.22 1.16 1.75 1.07 1 6135-16 1-11 1/2 3.87 1.43 2.13 1.63 1 1/4 6135-20 1 1/4-11 1/2 4.16 1.78 2.50 2.47 1 1/2 6135-24 1 1/2-11 1/2 4.34 2.00 2.75 3.15 Part No. Body Without With Thread Dimensions (in.) Size Flange Flange Size Overall Hex Wrench Wt. (LB.) (in.) Brass Brass NPTF Length Size Flats P/Piece D G F 3/4 6105-08 6115-08 1/2-14 3.11 1.62 1.18 0.82 3/4 6105-12 6115-12 3/4-14 3.11 1.62 1.18 0.76 1 6105-16 6115-16 1-11 1/2 3.55 1.88 1.56 1.30 1 1/4 6105-20 6115-20 1 1/4-11 1/2 3.71 2.13 1.88 1.65 1 1/2 6105-24 6115-24 1 1/2-11 1/2 4.12 2.50 2.18 2.61 Body Dimensions (in.) Size Part No. Bolt Hole Bolt Circle (in.) Steel Diameter Diameter G H 3/4 6107-08 (1 piece) .208 2.125 1 6107-16 (1 piece) .208 2.375 1 1/4 6107-20 (2 piece) .208 2.625 1 1/2 6107-24 (2 piece) .281 3.250 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-36 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics Connect Under Pressure Couplings 8200 Series Features Parker 8200 Series couplings feature: • Unique valve design permits connection while either or both the coupler and nipple are under pressure. • Double acting sleeve for one handed push-to-connect operation when coupler is clamp or bulkhead mounted. • Critical parts are hardened for durability. • Dependable ball locking mechanism holds the mating halves together. • Couplers and nipples are precision machined from solid bar stock. • The mating 8010 series nipples meet ISO 5675 requirements. Applications The 8200 Series brings to the industry a proven design for use on construction equipment, forestry equipment, agricultural machinery, oil tools, steel mill machinery, and other demanding hydraulic applications. Note: Protective dust plugs and caps play a crucial role in the life of a quick coupling and no purchase of a hydraulic quick coupling is complete without the selection of an appropriate dust plug and cap. See pages noted in Table of Contents for dust plugs and caps for the Parker full line of hydraulic couplings. Special Order Information Standard seal material is Nitrile, other seal options are available. See Ordering Information at end of Section B and Fluid Compatibility Chart at end of this catalog for assistance in making seal selection. Performance 8200 Series (1/2″) Test Fluid: Oil – 200 SUS 0 10 20 30 40 50 60 70 0 2 4 6 8 10 12 14 16 18 Flow in USGPM Pressure Drop in PSID 1/2″ Specifications Body Size (in.) 1/2 Rated Pressure (PSI) 3000 Rated Flow (GPM) 12 Temperature Range (std seals) -40° to +250°F Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-37 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics Connect Under Pressure Couplings 8200 Series Nipples Female Thread Couplers Female Thread E D F G Replacement Parts – 8200 Series Body Size (in.) Part Number Description Material 1/2 50005-211-0202 Q-Ring Nitrile Body Part Thread Thread Dimensions (in.) Size No. Size Size Overall Exposed Hex Largest Wt. (LB.) (in.) Steel NPTF ORB Length Length Size Diameter P/Piece D E F G 1/2 8010-4 1/2-14 – 1.95 1.09 1.06 1.23 0.20 1/2 8010-4P* 1/2-14 – 1.95 1.09 1.06 1.23 0.20 1/2 8010-15 – 3/4-16 2.06 1.20 1.06 1.23 0.20 1/2 8010-15P* – 3/4-16 2.06 1.20 1.06 1.23 0.20 1/2 8010-16 – 7/8-14 2.05 1.18 1.06 1.23 0.25 1/2 8010-16P* – 7/8-14 2.05 1.18 1.06 1.23 0.25 Body Part Thread Thread Dimensions (in.) Size No. Size Size Overall Wrench Largest Wt. (LB.) (in.) Steel NPSF ORB Length Flats Diameter P/Piece A B C 1/2 8250-4 1/2-14 – 3.29 0.87 1.50 0.63 1/2 8250-15 – 3/4-16 3.29 0.87 1.50 0.63 1/2 8250-16 – 7/8-14 3.29 0.87 1.50 0.63 * Poppet design A C B Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-39 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics Connect Under Pressure Couplings 9200 Series Couplers Nipples Replacement Parts 9200 Series B C A Body Size (in.) 1/2 O-Rings – Nitrile 50001-211-0260 Body Part Thread Dimensions (in.) Size No. Size Overall Wrench Largest Wt. (LB.) (in.) Steel NPTF ORB Length Flats Diameter P/Piece A B C 1/2 9250-4-320 1/2-14 – 5.37 1.13 1.50 2.02 1/2 9250-6-320 – 9/16-18 5.37 1.13 1.50 2.04 1/2 9250-15-320 – 3/4-16 5.37 1.13 1.50 2.06 1/2 9250-16-320 – 7/8-14 5.37 1.13 1.50 1.98 *1/2 9250-334 – 9/16-18 5.37 1.13 1.50 2.15 * Mates with the 1/4″ 60 Series Nipples. Body Part Thread Thread Dimensions (in.) Size No. Size Size Overall Exposed Hex Largest Wt. (LB.) (in.) Steel NPTF ORB Length Length Size Diameter P/Piece D E F G 1/2 8010-4 1/2-14 – 1.95 1.09 1.06 1.23 0.20 1/2 8010-4P* 1/2-14 – 1.95 1.09 1.06 1.23 0.20 1/2 8010-15 – 3/4-16 2.06 1.20 1.06 1.23 0.20 1/2 8010-15P* – 3/4-16 2.06 1.20 1.06 1.23 0.20 1/2 8010-16 – 7/8-14 2.05 1.18 1.06 1.23 0.25 1/2 8010-16P* – 7/8-14 2.05 1.18 1.06 1.23 0.25 * Poppet design E D F G Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-40 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics Connect Under Pressure Couplings 5000 Series Features The Parker 5000 Series coupling features: • Two-piece coupler body that permits operation while one or both halves are under pressure as well as when there is no pressure in either half. • Connect under pressure by unscrewing the valve body until two or three threads are visible. • Nipple can be inserted and locked into the coupler without opening either valve. (Use a wrench to thread the valve body back into the coupler, the valves are opened against internal pressure. If internal pressure makes manual disconnect difficult, unscrewing the valve body from the coupler will permit the valves to close, thereby relieving internal pressure and allowing manual operation of the ball-locking sleeve.) • The mating 8010 series nipples meet ISO 5675 requirements. Applications The Parker 5000 Series is an economical coupling that is a threaded union and can be connected under pressure with tools. For applications that require a coupling to be connected under-pressure and where tools can be used to make the connection, the 5000 Series coupling should be considered. Note: Protective dust plugs and caps play a crucial role in the life of a quick coupling and no purchase of a hydraulic quick coupling is complete without the selection of an appropriate dust plug and cap. See pages noted in Table of Contents for dust plugs and caps for the Parker full line of hydraulic couplings. Performance 5000 Series (1/2″) Test Fluid: Oil – 200 SUS 0 10 20 30 40 50 60 70 0 2 4 6 8 10 12 14 16 18 Flow in USGPM Pressure Drop in PSID 1/2″ Specifications Body Size (in.) 1/2 Rated Pressure (PSI) 2500 Rated Flow (GPM) 12 Temperature Range (std seals) -40° to +250°F Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-41 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics Connect Under Pressure Couplings 5000 Series Coupler Replacement Parts 5000 Series Nipple C D A B E Body Size (in.) 1/2 O-Rings – Nitrile 50001-211-0260 E D F G Body Part Thread Dimensions (in.) Size No. Size Overall Wrench Wrench Largest Wt. (LB.) (in.) Steel NPTF Length Length Flats Flats Diameter P/Piece A B C D E 1/2 5050-4 1/2-14 2.88 2.32 1.06 1.25 1.52 2.58 Body Part Thread Dimensions (in.) Size No. Size Overall Exposed Hex Largest Wt. (LB.) (in.) Steel NPTF ORB Length Length Size Diameter P/Piece D E F G 1/2 8010-4 1/2-14 – 1.95 1.09 1.06 1.23 0.20 1/2 8010-15 – 3/4-16 2.06 1.20 1.06 1.23 0.20 1/2 8010-16 – 7/8-14 2.05 1.18 1.06 1.23 0.20 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-42 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics High Pressure Couplings 3000 Series 1 2 1 3 5 4 6 Features 1. Machined from solid steel barstock for durability. 2. The 3000 Series employs a threaded sleeve locking mechanism, mates with matching male threads on the nipple. The two halves must be manually threaded together for connection. 3. Hard, chrome alloy balls are used for valving. They are spring loaded for positive seating of the valve. 4. The valve provides a metal-to-metal seal between the ball and a coined seat. 5. The interface seal is polyurethane which resists high pressure extrusion. 6. A threaded valve retainer provides a valve stop that assures positive valve alignment. Applications Parker 3000 Series couplings with their threaded union locking system and precision ball-type check valves, are designed for extreme high pressure applications such as found on portable hydraulic rams. See pages noted in Table of Contents for dust plugs and caps for the Parker full line of hydraulic couplings. Note: Protective dust plugs and caps play a crucial role in the life of a quick coupling and no purchase of a hydraulic quick coupling is complete without the selection of an appropriate dust plug and cap. See pages noted in Table of Contents for hydraulic couplings dust plugs and caps for the full line of hydraulic couplings. Performance 3000 Series (1/4″, 3/8″) Test Fluid: Oil – 200 SUS 0 20 40 60 80 100 120 140 160 0 1 2 3 4 5 6 7 8 9 Flow in USGPM Pressure Drop in PSID 1/4″ 3/8″ Specifications Body Size (in.) 1/4 3/8 Rated Pressure (PSI) Static 10,000 10,000 Rated Flow (GPM) 3 6 Temperature Range (std seals) -22° to +230°F Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-43 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics High Pressure Couplings 3000 Series Couplers Nipples D E F G A B C Body Thread Dimensions (in.) Size Part Size Overall Wrench Largest Wt. (LB.) (in.) No. NPTF Length Flats Diameter P/Piece A B C 1/4 3050-2 1/4-18 (Male) 2.38 0.81 1.13 0.25 3/8 3050-3 3/8-18 (Male) 2.88 1.00 1.38 0.49 3/8 3050-3-231 3/8-18 (Female) 2.82 1.00 1.38 0.49 Body Part Thread Dimensions (in.) Size No. Size Overall Expose Hex Largest Wt. (LB.) (in.) Steel NPTF Length Length Size Diameter P/Piece D E F G 1/4 3010-2 1/4-18 (Female) 1.29 0.48 0.88 1.13 0.14 3/8 3010-3 3/8-18(Female) 1.58 0.50 0.94 1.25 0.23 3/8 3010-3-230 3/8-18 (Male) 2.31 1.23 1.00 1.25 0.30 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-44 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics High Pressure Couplings TC Series Features • Positive valve stop. The perch maintains valve alignment and provides metal to metal valve stop to insure that the valves open full–every time. • Precision machined valves with elastomeric seals provide for positive shut-off upon disconnection. • Hardened nipples and sleeves and solid barstock construction make for a quality coupling with maximum resistance to damage from hydraulic and mechanical shock. • Durable ball-locking mechanism assures reliable connection every time. A large number of locking balls distributes the work load evenly while providing alignment and swiveling action to reduce hose torque and prolong hose life. CAUTION: These products are not to be used as swivels, rotation under pressure will result in excessive and premature wear. • Female pipe (NPSF) standard. • The standard Fluorocarbon seal is designed to withstand extremely high pressures and provide reliable sealing. PTFE back-up ring provides support for the seal in high pressure applications. • Sleeve locking mechanism prevents accidental disconnection when the coupling is dragged along the ground. • Steel construction, Chromium-6 Free plating for corrosion resistance. Specifications Body Size (in.) 3/8 Rated Pressure (PSI) 10,000 Rated Flow (GPM) 6 Temperature Range (std seals) -15° to +400°F Performance 3/8″ TC Series (3/8″) Test Fluid: Oil – 200 SUS 0 10 20 30 40 50 60 70 80 90 100 0 1 2 3 4 5 6 7 8 9 Flow in USGPM Pressure Drop in PSID Applications Parker TC series couplings are found in the construction, railway maintenance and house moving industries. Used on hydraulic jacking equipment, these couplers eliminate costly down time caused by improperly connected threaded types. For use where high pressure capability is required coupled with positive coupling action. Considerably faster to use than threaded types. Note: Protective dust plugs and caps play a crucial role in the life of a quick coupling and no purchase of a hydraulic quick coupling is complete without the selection of an appropriate dust plug and cap. See pages noted in Table of Contents for dust plugs and caps for the Parker full line of hydraulic couplings. Nipple Coupler B A C G F E D Body Fitting Dimensions (in.) Size Part Thread Overall Hex Largest Wt. (LB.) (in.) No. Size Length Size Diameter P/Piece A B C 3/8 TC-371 3/8-18 NPSF 2.48 0.94 1.25 0.43 Body Fitting Dimensions (in.) Size Part Thread Overall Exposed Hex Largest Wt. (LB.) (in.) No. Size Length Length Size Diameter P/Piece D E F G 3/8 TC-372 3/8-18 NPSF 1.82 0.66 0.94 1.08 0.14 NPSF – National Pipe Straight Fuel Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-45 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics Specifications Body Size (in.) 1/4 Rated Pressure (PSI) 10,000 Rated Connect-Under-Pressure Capability (PSI) 5000 Rated Flow (GPM) 3 Temperature Range (Polyurethane seals) -30° to +180°F Vacuum test 20 in/Hg Torque to connect at 1000 PSI 47 in/lbs. High Pressure Couplings 1141 Series Applications The 1141 Series is a general purpose coupling for high pressure connect-under-pressure applications. Features • 303 Stainless steel body. • Brass locking sleeve • Polyurethane seals to resist extrusion and abrasion. • Self locking threads help prevent coupling from accidentally disconnecting. • Visual makeup – when fully coupled the edge of the sleeve will be flush with the end of the male thread – giving a visual check for complete coupling. • Small diameter mating seal helps keep separation forces to a minimum, allowing for easier connect and disconnect at pressures up to 5,000 PSI. • 10,000 PSI working pressure, 17,000 PSI intermittent pressure. • Dust caps and plugs included. Coupler Nipple C D A B Body Thread Size Part Size Dimensions Wt. (LB.) (in.) No. NPTF (in.) P/Piece C D 1/4 1141-63 1/4-18 2.00 .88 0.26 Body Thread Size Part Size Dimensions Wt. (LB.) (in.) No. NPTF (in.) P/Piece A B 1/4 1141-62 1/4-18 2.75 1.00 0.40 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-46 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics Mold Coolant Line Couplings Moldmate Series Applications Parker moldmate couplings are specifically designed for connecting coolant lines to molds and dies, on injection molding machinery in the plastics and die casting industries. Moldmate couplings significantly reduce machine downtime by providing fast and easy connection of coolant lines during mold changes. Their short nipples can be recessed below the surface of the mold for more efficient storage of molds. Moldmate couplers are available with or without valves in the female half. Non-valved couplers provide maximum flow for efficient cooling.Valved couplers shut off when disconnected. Special Order Information Standard seal material is Silicone and is compatible with water and water glycol fluids commonly used in heat transfer systems. Fluorocarbon seals are available for use only with oil-based media and not with water glycol. To specify a Fluorocarbon seal, add the suffix “Y” to the standard moldmate part number, thus: PC206Y. Specifications Body Size (in.) 1/4 3/8 1/2 Rated Pressure (PSI) 200 200 200 Rated Flow (GPM) 3 6 12 Performance Selection Guidelines Moldmate couplings are designed for a maximum working pressure of 200 PSI. Most thermoplastic and thermoset heat transfer systems have pumps which provide relatively high flow rates at relatively low pressures.Water and water glycol systems usually have capacities ranging from 10 to 40 gpm, with most from 10 to 15 gpm. Normal medial opening pressures are 20 to 60 PSI for these systems. Heat transfer systems using oil generally operate from 10 to 30 PSI. However, their flow rates are usually much higher, requiring the total volume of oil to be circulated at least once per minute. The number of hose connections in a single mold system results in a cumulative pressure drop. Please note the Pressure Drop vs. Flow Rate chart provided, to select the appropriate size. Temperature is another important consideration. Parker moldmate couplings with their standard Silicone seal have a temperature capability of -90° to +400°F. Rapid deterioration of the seal and leakage may result if used beyond these limits. External conditions of temperature, corrosive atmospheres, and other abnormalities may affect coupling performance and must be considered when selection is made. Consult factory with questions. Moldmate Series (1/4″, 3/8″, 1/2″) Test Fluid: Water (Straight Coupler) 0 5 10 15 20 25 30 35 40 45 50 0 2 4 6 8 10 12 14 16 18 Flow in USGPM Pressure Drop in PSID 1/4″ Valved 1/4″ Non-valved 3/8″ Valved 3/8″ Non-valved 1/2″ Non-valved Material Temperature Range Standard Silicone seal -90° to +400°F *Optional Fluorocarbon seal -15° to +400°F * For use with oil based media only Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-47 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics Mold Coolant Line Couplings Moldmate Series 3 1 2 4 Features 1. Available with or without valves in the coupler. Non-valved couplers have minimum flow resistance for maximum cooling.Valved couplers shut off automatically upon disconnect.Valved couplers can be used with either valved or non-valved nipples. A valved nipple, however, must be used with a valved coupler. 2. Nipples are designed to be recessed below mold surfaces to provide more efficient storage of molds and prevent damage to the nipple. 3. Widest choice of end fittings available, including straight, 45° or 90° with standard hose barb or Push-Lok barbs for easy installation. 4. Couplers and nipples are made of corrosion resistant brass, and valved couplers or valved nipple have a Fluorocarbon O-ring on poppet and Silicone interface seal as standard for use with water glycol type fluids commonly used in heat transfer systems. 5. Silver colored sleeve designates valved coupler. A B C 45 Degree Couplers Straight A C B Body Part No. Part No. Dimensions (in.) Size Brass Wt. (LB.) Brass Wt. (LB.) Hose Overall Largest Overall Hex Largest (in.) Non-valved P/Piece Valved P/Piece I.d. Length Diameter Length Size Diameter Non-valved Valved A C A B C 1/4 PC204 0.10 PC204AV 0.10 1/4 1.87 0.63 2.67 0.63 0.71 1/4 PC204-BP* 0.10 PC204AV-BP 0.10 1/4 1.89 0.63 2.52 0.63 0.71 1/4 PC205 0.09 PC205AV 0.10 5/16 1.87 0.63 2.67 0.63 0.71 1/4 PC206 0.09 PC206AV 0.10 3/8 1.87 0.63 2.67 0.63 0.71 1/4 PC206-BP* 0.11 PC206AV-BP 0.13 3/8 2.04 0.63 2.70 0.63 0.71 3/8 PC306 0.24 PC306V 0.27 3/8 3.01 0.96 3.17 0.88 1.01 3/8 PC306-BP* 0.26 PC306V-BP 0.29 3/8 3.15 0.96 3.31 0.88 1.01 3/8 PC308 0.25 PC308V 0.28 1/2 3.15 0.96 3.17 0.88 1.01 3/8 PC308-BP* 0.25 PC308V-BP 0.03 1/2 3.27 0.96 3.43 0.88 1.01 1/2 PC504 0.46 NA – 1/2 3.55 1.30 – 1/2 PC504-BP* 0.50 NA – 1/2 3.68 1.21 – 1/2 PC506 0.48 NA – 3/4 3.80 1.21 – 1/2 PC506-BP* 0.52 NA – 3/4 3.80 1.21 – NA = Not Available Body Part No. Part No. Dimensions (in.) Size Brass Wt. (LB.) Brass Wt. (LB.) Hose Overall Hex Largest Overall Hex Largest (in.) Non-valved P/Piece Valved P/Piece I.D. Length Size Diameter Length Size Diameter Non-valved Valved A B C A B C 1/4 PC224 0.13 PC224AV 0.13 1/4 2.67 0.56 0.71 2.87 0.63 0.71 1/4 PC224-BP* 0.13 PC224AV-BP 0.14 1/4 2.57 0.56 0.71 2.77 0.63 0.71 1/4 PC226 0.13 PC226AV 0.14 3/8 2.71 0.56 0.71 2.91 0.63 0.71 1/4 PC226-BP* 0.26 PC226AV-BP 0.17 3/8 2.74 0.56 0.71 2.94 0.63 0.71 3/8 PC326 0.36 PC326V 0.36 3/8 3.65 0.88 0.96 3.65 0.88 1.01 3/8 PC326-BP* 0.34 PC326V-BP 0.36 3/8 3.75 0.88 0.96 3.75 0.88 1.01 3/8 PC328 0.36 PC328V 0.36 1/2 3.69 0.88 0.96 3.69 0.88 1.01 3/8 PC328-BP* 0.34 PC328V-BP 0.40 1/2 3.88 0.88 0.96 3.88 0.88 0.96 1/2 PC524 0.74 NA – 1/2 4.18 1.12 1.21 – 1/2 PC524-BP* 0.78 NA – 1/2 4.28 1.12 1.21 – 1/2 PC526 0.76 NA – 3/4 4.56 1.12 1.21 – 1/2 PC526-BP* 0.80 NA – 3/4 4.56 1.12 1.21 – * Suffix BP in part number denotes Push-Lok hose barb. Without suffix denotes standard hose barb. Push-Lok hose barbs are designed for use with Parker Push-Lok hose and do not require clamps. Valved Couplers can be used with either non-valved or valved nipples. Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-48 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics A C B Mold Coolant Line Couplings Moldmate Series 90 Degree Sub Assemblies and Individual Replacement Parts Valves (for Valved Sub-assembly) Body Size (in.) Part No. Material 1/4 3613001 Brass 3/8 P300-11S Brass Replacement Seals (for both Valved and Non-valved) Seal Material Body Size (in.) 1/4 Body Size (in.) 3/8 Body Size (in.) 1/2 * Silicone P200-9A P300-9A P500-9A * Fluorocarbon P200-9AY P300-9AY — * Please note: Bulk seals are considered to be non-returnable. Body Part No. Part No. Dimension (in.) Dimensions (in.) Size Brass Wt. (LB.) Brass Wt. (LB.) Hose Overall Hex Largest Overall Hex Largest (in.) Non-valved P/Piece Valved P/Piece I.D. Length Size Diameter Length Size Diameter Non-valved Valved A B C A B C 1/4 PC214 0.13 PC214AV 0.14 1/4 1.78 0.56 0.71 1.98 0.63 0.71 1/4 PC214-BP* 0.14 PC214AV-BP 0.14 1/4 1.78 0.56 0.71 1.98 0.63 0.71 1/4 PC215 0.13 PC215AV 0.14 5/16 1.78 0.56 0.71 1.98 0.63 0.71 1/4 PC216 0.14 PC216AV 0.15 3/8 1.78 0.56 0.71 1.98 0.63 0.71 1/4 PC216-BP* 0.16 PC216AV-BP 0.17 3/8 1.80 0.56 0.71 2.00 0.63 0.71 3/8 PC316 0.31 PC316V 0.31 3/8 2.78 0.88 0.96 2.78 0.88 0.96 3/8 PC316-BP* 0.37 PC316V-BP 0.37 3/8 2.78 0.88 0.96 2.78 0.88 0.96 3/8 PC318 0.33 PC318V 0.35 1/2 2.78 0.88 0.96 2.78 0.88 0.96 3/8 PC318-BP* 0.37 PC318V-BP 0.39 1/2 2.80 0.88 0.96 2.80 0.88 0.96 1/2 PC514 0.79 NA – 1/2 3.50 1.12 1.21 – 1/2 PC514-BP* 0.83 NA – 1/2 3.50 1.12 1.21 – 1/2 PC516 0.80 NA – 3/4 3.50 1.12 1.21 – 1/2 PC516-BP* 0.84 NA – 3/4 3.50 1.12 1.21 – * Suffix BP in part number denotes Push-Lok hose barb. Without suffix denotes standard hose barb. Push-Lok hose barbs are designed for use with Parker Push-Lok hose and do not require clamps. Valved Couplers can be used with either non-valved or valved nipples. A B C Part No. Thread Dimensions (in.) Body Brass Wt. (LB.) Size Overall Hex Largest Size (in.) For Valving P/Piece NPTF Length Size Diameter A B C 1/4 P201-01A 0.07 1/8-27 1.35 0.56 0.71 3/8 P301-01A 0.21 1/4-18 1.84 0.88 0.96 *Bodies are designed for use with valves retained by a male pipe fitting (i.e. hose barb). Order valves and valve springs seperately. Non-valved Sub-assembly (Brass Sleeve) Assembly Instruction Sheet (for all sizes & configurations) Order Part Number 9090065 Part No. Thread Dimensions (in.) Body Brass Wt. (LB.) Size Overall Hex Largest Size (in.) For No-valving P/Piece NPTF Length Size Diameter A B C 1/4 P208-01A 0.07 1/8-27 1.15 0.56 0.71 3/8 P308-01A 0.21 1/4-18 1.84 0.88 0.96 3/8 P308-01A-HF 0.20 3/8-18 1.84 0.88 0.96 1/2 PC500 0.34 1/2-14 2.02 1.12 1.21 Valve Springs (for Valved Sub-assembly) Body Size (in.) Part No. Material 1/4 7820123 Stainless 3/8 P300-6 Stainless Valved* Sub-assembly (Silver Colored Sleeve) Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-49 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics Body Part Thread Dimensions (in.) Installation Size No. Size Overall **Exposed Hex Largest Recess Wt. (LB.) (in.) Brass NPTF Length Length Size Dia. Dia. Depth P/Piece D E F G A B 1/4 BPV252* 1/4-18 1.21 0.82 .56 0.67 0.84 0.94 0.03 3/8 BPV353* 3/8-18 1.48 0.88 .69 0.79 1.00 1.23 0.07 *Valved Nipple must be used with Valved Coupler. **This dimension represents the portion of the nipple that is exposed when inserted into a moldmate coupler. Mold Coolant Line Couplings Moldmate Series Nipples Female Pipe Thread D E G A B Male Nipple Installation Male Pipe Thread D E F G Valved Nipple Body Part Wt. (LB.) Part Wt. (LB.) Thread Dimensions (in.) Installation Size No. P/Piece No. P/Piece Size Overall **Exposed Hex Largest Recess (in.) Brass Brass Steel Steel NPTF Length Length Size Dia. Dia. Depth D E F G A B 1/4 PN250 0.02 – – 1/16-27 0.94 0.54 0.44 0.51 0.69 0.69 1/4 PN251 0.02 PN251S 0.02 1/8-27 0.94 0.54 0.44 0.51 0.69 0.69 1/4 PN252 0.03 PN252S 0.03 1/4-18 1.13 0.74 0.56 0.67 0.84 0.94 1/4 PN253 0.05 PN253S 0.05 3/8-18 1.19 0.79 0.69 0.79 1.00 0.94 3/8 PN352 0.04 PN352S 0.04 1/4-18 1.34 0.74 0.56 0.65 1.00 1.09 3/8 PN353 0.06 PN353S 0.06 3/8-18 1.38 0.78 0.69 0.79 1.00 1.13 3/8 PN354 0.12 NA – 1/2-14 1.59 0.99 0.88 1.01 1.19 1.25 1/2 PN553 0.12 NA – 3/8-18 1.53 0.77 0.88 1.01 1.25 1.34 1/2 PN554 0.11 NA – 1/2-14 1.70 0.94 0.88 1.01 1.25 1.50 1/2 PN556 0.16 NA – 3/4-14 1.75 0.99 1.06 1.23 1.50 1.56 Body Part Wt. (LB.) Part Wt. (LB.) Thread Dimensions (in.) Size No. P/Piece No. P/Piece Size Overall **Exposed Hex Largest (in.) Brass Brass Steel Steel NPTF Length Length Size Diameter D E F G 1/4 BPN251F 0.02 PN251F 0.02 1/8-27 0.97 0.58 0.50 0.58 1/4 BPN252F 0.05 PN252F 0.04 1/4-18 1.28 0.89 0.63 0.72 1/4 BPN253F 0.08 PN253F 0.08 3/8-18 1.41 1.02 0.75 0.87 3/8 BPN352F 0.05 PN352F 0.05 1/4-18 1.48 0.88 0.63 0.72 3/8 BPN353F 0.07 PN353F 0.06 3/8-18 1.58 0.98 0.75 0.87 D E F G Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-50 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics D E G F Body Part Thread Dimensions (in.) Wt. Size No. Size Overall Hex Largest (LB.) (in.) Brass NPTF Length Length Size Dia. P/Piece D E F G 1/4 PN250-25 1/16-27 2.50 .69 3/8 0.43 0.04 1/4 PN250-40 1/16-27 4.00 .81 3/8 0.43 0.06 1/4 PN250-55 1/16-27 5.50 .81 3/8 0.43 0.09 1/4 PN251-25 1/8-27 2.50 .69 7/16 0.51 0.06 1/4 PN251-40 1/8-27 4.00 1.00 7/16 0.51 0.10 1/4 PN251-55 1/8-27 5.50 1.00 7/16 0.51 0.13 1/4 PN251-70 1/8-27 7.00 1.00 7/16 0.51 0.17 1/4 PN251-85 1/8-27 8.50 1.00 7/16 0.51 0.21 1/4 PN252-25 1/4-18 2.50 .88 9/16 0.65 0.09 1/4 PN252-40 1/4-18 4.00 1.25 9/16 0.65 0.15 1/4 PN252-55 1/4-18 5.50 1.25 9/16 0.65 0.22 1/4 PN252-70 1/4-18 7.00 1.25 9/16 0.65 0.27 1/4 PN252-85 1/4-18 8.50 1.25 9/16 0.65 0.33 3/8 PN351-25 1/8-27 2.50 .88 9/16 0.65 0.07 3/8 PN351-40 1/8-27 4.00 1.00 9/16 0.65 0.11 3/8 PN351-55 1/8-27 5.50 1.00 9/16 0.65 0.15 3/8 PN351-70 1/8-27 7.00 1.00 9/16 0.65 0.18 3/8 PN351-85 1/8-27 8.50 1.00 9/16 0.65 0.22 3/8 PN352-25 1/4-18 2.50 .88 9/16 0.65 0.09 3/8 PN352-40 1/4-18 4.00 1.25 9/16 0.65 0.15 3/8 PN352-55 1/4-18 5.50 1.25 9/16 0.65 0.21 3/8 PN352-70 1/4-18 7.00 1.25 9/16 0.65 0.27 3/8 PN352-85 1/4-18 8.50 1.25 9/16 0.65 0.33 3/8 PN353-25 3/8-18 2.50 1.00 11/16 0.79 0.12 3/8 PN353-40 3/8-18 4.00 1.25 11/16 0.79 0.20 3/8 PN353-55 3/8-18 5.50 1.25 11/16 0.79 0.28 3/8 PN353-70 3/8-18 7.00 1.25 11/16 0.79 0.37 3/8 PN353-85 3/8-18 8.50 1.25 11/16 0.79 0.45 Mold Coolant Line Couplings Moldmate Series Moldmate Extension Nipples Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-51 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics High Flow Couplings ST Series Applications The Parker ST Series are non-valved couplings for applications where maximum flow is required. Their smooth, open bore offers the lowest pressure drop of any quick coupling design and is ideal for applications such as high-pressure water and steam washers, carpet cleaners and mold coolant lines and many other non-valved applications. Specifications Body Size (in.) 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 Rated Pressure (PSI) Brass Cplr/Npl 2500 5200 2700 2200 1700 1200 1700 1400 Brass Cplr/Steel Npl 2600 5500 3500 2700 2700 2000 – – SS Cplr/Npl 4200 6700 5500 3000 3000 1700 – – Rated Flow 3 6 12 12 28 50 76 100 Temperature Range (std seals) -40° to +250°F Performance ST Series (3/4″, 1″, 1-1/4″) Test Fluid: Oil – 150 SUS 0 1 2 3 4 5 0 20 40 60 80 100 Flow in USGPM Pressure Drop in PSID 3/4″ 1″ 1-1/4″ ST Series (1/8″, 1/4″, 3/8″, 1/2″) Test Fluid: Oil – 150 SUS 0 2 4 6 8 10 12 0 2 4 6 8 10 12 14 16 18 Flow in USGPM Pressure Drop in PSID 1/8″ 1/4″ 3/8″ 1/2″ Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-52 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics High Flow Couplings ST Series Features • The smooth, open bore with no valving in either half offers minimal pressure drop and allows easy cleaning in applications where the same lines are used for more than one media. • ST couplers and nipples are machined from solid barstock, providing a quality coupling that is durable. ST couplers are available in brass and 303 stainless steel as standard product materials. • ST nipples are available in 303 stainless steel, brass and Chromium-6 Free plated steel. The ball locking grooves of the steel ST nipples are case hardened for resistance to brinelling where high cycle rates and pressure surges are encountered. • The ST is an “Interchange” coupling since it dimensionally and functionally interchanges with similar couplings made by other manufacturers. Couplers Female Pipe Thread Male Pipe Thread A C B A C B Body Part No. Part No. Thread Dimensions (in.) Size Wt. (LB.) Type 303 Wt. (LB.) Size Overall Wrench Largest (in.) Brass P/Piece Stainless P/Piece NPTF Length Flats Diameter A B C 1/8 BST-1 0.06 SST-1 0.05 1/8-27 1.06 0.56 0.69 1/4 BST-2 0.17 SST-2 0.15 1/4-18 1.54 0.81 0.94 3/8 BST-3 0.26 SST-3 0.24 3/8-18 1.59 1.00 1.16 1/2 BST-4 0.59 SST-4 0.37 1/2-14 1.98 1.13 1.30 3/4 BST-6 0.62 SST-6 0.57 3/4-14 2.15 1.44 1.66 1 BST-8 0.99 SST-8 0.93 1-11 1/2 2.43 1.75 2.02 1-1/4 BST-10 1.38 – – 1 1/4-11 1/2 2.44 2.00 2.51 1-1/2 BST-12 1.42 – – 1 1/2-11 1/2 2.88 2.50 3.00 Body Part No. Part No. Thread Dimensions (in.) Size Wt. (LB.) Type 303 Wt. (LB.) Size Overall Wrench Largest (in.) Brass P/Piece Stainless P/Piece NPTF Length Flats Diameter A B C 1/8 BST-1M 0.05 SST-1M 0.05 1/8-27 1.06 0.56 0.69 1/4 BST-2M 0.16 SST-2M 0.16 1/4-18 1.69 0.81 0.81 3/8 BST-3M 0.25 SST-3M 0.21 3/8-18 1.75 1.00 1.16 1/2 BST-4M 0.34 SST-4M 0.31 1/2-14 1.94 1.13 1.30 3/4 BST-6M – SST-6M 0.49 3/4-14 2.17 1.44 1.66 1 BST-8M 0.85 SST-8M 0.08 1-11 1/2 2.53 1.75 2.02 Special Order Information All sizes of ST Series can be furnished with locking sleeves. Place suffix letters “SL” (Sleeve-Lok) after regular catalog numbers. Example: SST-4MSL. Standard seal material is Nitrile. Ethylene Propylene, Fluorocarbon, or Neoprene seals are available upon request. See Fluid Compatibility Chart for recommendations. Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-53 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics High Flow Couplings ST Series Nipples Female Pipe Thread D E G F Nipples Male Pipe Thread D E G F Replacement Parts ST Series Body Part Part Part No. Thread Dimensions (in.) Size No. Wt. (LB.) No. Wt. (LB.) Type 303 Wt. (LB.) Size Overall Exposed Hex Largest (in.) Brass P/Piece Steel P/Piece Stainless P/Piece NPTF Length Length Size Dia. D E F G 1/8 BST-N1 0.03 ST-N1 0.03 SST-N1 0.02 1/8-27 .98 0.57 0.56 0.65 1/4 BST-N2 0.07 ST-N2 0.07 SST-N2 0.07 1/4-18 1.46 0.74 0.75 0.87 3/8 BST-N3 0.12 ST-N3 0.11 SST-N3 0.11 3/8-18 1.62 0.96 .088 1.59 1/2 BST-N4 0.23 ST-N4 0.21 SST-N4 0.21 1/2-14 1.85 0.95 1.13 1.30 3/4 BST-N6 0.33 ST-N6 0.32 SST-N6 0.32 3/4-14 2.15 1.09 1.38 1.59 1 BST-N8 0.52 ST-N8 0.49 SST-N8 0.48 1-11 1/2 2.35 1.18 1.63 1.88 1 1/4 BST-N10 0.85 – – – – 1 1/4-11 1/2 2.38 1.11 2.00 2.31 1 1/2 BST-N12 1.45 – – – – 1 1/2-11 1/2 2.81 1.17 2.38 2.74 Body Part Part Part No. Thread Dimensions (in.) Size No. Wt. (LB.) No. Wt. (LB.) Type 303 Wt. (LB.) Size Overall Exposed Hex Largest (in.) Brass P/Piece Steel P/Piece Stainless P/Piece NPTF Length Length Size Dia. D E F G 1/8 BST-N1M 0.02 ST-N1M 0.02 SST-N1M 0.02 1/8-27 1.04 0.63 0.44 0.51 1/4 BST-N2M 0.06 ST-N2M 0.05 SST-N2M 0.05 1/4-18 1.53 0.81 0.56 0.65 3/8 BST-N3M 0.08 ST-N3M 0.07 SST-N3M 0.08 3/8-18 1.69 0.86 0.69 0.79 1/2 BST-N4M 0.15 ST-N4M 0.13 SST-N4M 0.13 1/2-14 1.94 1.01 0.88 1.01 3/4 BST-N6M 0.23 ST-N6M 0.21 SST-N6M 0.22 3/4-14 2.19 1.11 1.06 1.23 1 BST-N8M 0.46 ST-N8M 0.43 SST-N8M 0.43 1-11 1/2 2.51 1.34 1.38 1.59 1 1/4 BST-N10M 0.96 – – – – 1 1/4-11 1/2 2.85 1.60 1.88 2.17 1 1/2 BST-N12M 1.46 – – – – 1 1/2-11 1/2 3.25 1.59 2.13 2.45 Body Size (in.) ST Series O-Rings 3/4 1 1-1/4 1-1/2 Standard Nitrile* 50001-212-0010 50001-217-0010 50001-221-0010 50001-327-0010 * Other compounds available are Ethylene Propylene, Fluorocarbon, Neoprene (Contact the division for compound availability) Body Size (in.) ST Series O-Rings 1/8 1/4 3/8 1/2 Standard Nitrile* 50001-010-0010 50001-110-0010 50001-112-0010 50001-114-0010 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-54 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics High Flow Couplings Water Service Series Applications Parker Water Service Couplings are used anywhere water hoses are connected and disconnected frequently. They are used on a wide variety of applications including garden hoses, wash down systems, and mobile water tank lines. The unvalved design permits maximum flow with minimum pressure drop. Coupler Nipple Features • Brass and stainless steel construction for heavy duty service. • Durable 4-ball locking mechanism for secure connections. • Quality, temperature-resistant Nitrile seals for a leak-free service life. A C D E Body Part Thread Size Overall Length Largest Diameter Wt. (LB.) Size (in.) No. NH A C P/Piece 3/4 1163-60 3/4-11 1/2 1.16 1.21 0.12 Body Part Thread Size Overall Length Exposed Length Wt. (LB.) Size (in.) No. NH D E P/Piece 3/4 1163-61 3/4-11 1/2 1.25 .50 0.08 Specifications Body Size (in.) 3/4″ Rated Pressure (PSI) 200 Rated Flow (GPM) 28 Temperature Range (std seals) -40°F to +250°F Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-55 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics High Flow Couplings HO Series Applications HO Series couplings are used in a wide variety of applications. HO couplings are used in refineries, petrochemical plants and paper and pulp mills for connecting hose lines for high pressure hydro-blasting of boilers and pipe lines. They are also used in oil fields on hose lines for internal and external pressure testing of tubing. Note: Protective dust plugs and caps play a crucial role in the life of a quick coupling and no purchase of a hydraulic quick coupling is complete without the selection of an appropriate dust plug and cap. See pages noted in Table of Contents for hydraulic couplings dust plugs and caps for the full line of hydraulic couplings. Features • For high pressure applications: working pressures to 15,000 PSI (1,050 Bar) for the 1/4” and 3/8” sizes; to 10,000 PSI (700 Bar) for the 1/2” size. • No internal valving to restrict flow. • Made of steel with electroless nickel plating for corrosion resistance. • Standard sleeve-lock feature which helps prevent accidental disconnect. • Standard Nitrile Body O-Ring. Backed up by PTFEwasher to prevent seal extrusion. Couplers Nipples G F E D C B A Specifications Body Size (in.) 1/4 3/8 1/2 Rated Pressure (PSI) 15,000 15,000 10,000 Rated Flow (GPM) 3 6 12 Temperature Range (std seals) -40° to +250°F Body Thread Dimensions (in.) Size Part Size Overall Hex Largest Wt. (LB.) (in.) No. NPSF Length Size Diameter P/Piece A B C 1/4 HO-251-4FP 1/4-18 1.67 0.94 1.06 0.24 3/8 HO-371-6FP 3/8-18 1.67 0.94 1.06 0.22 1/2 HO-501-8FP 1/2-14 2.03 1.25 1.62 0.52 Body Thread Dimensions (in.) Size Part Size Overall Exposed Hex Largest Wt. (LB.) (in.) No. NPSF Length Length Size Diameter P/Piece D E F G 1/4 HO-252-4FP 1/4-18 1.40 0.66 0.81 0.94 0.10 3/8 HO-372-6FP 3/8-18 1.44 0.70 0.94 1.08 0.12 1/2 HO-502-8FP 1/2-14 2.03 0.86 1.12 1.30 0.26 NPSF – National Pipe Straight Fuel Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-56 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics Features • Parker DM Series offer double shut-off valving and push-toconnect operation in a small envelope size. • They are constructed of nickel plated brass and are available in 1/8″ body size only. • Standard seals are Fluorocarbon, but other seal material is available upon request. See the Coupling Selection and Ordering Information Guide at the beginning of Section A and the Fluid Compatibility Chart at the end of this catalog for optional materials. Applications Typical applications include dental equipment, lubrication equipment, fluid transfer and coolant lines. Special Purpose–Double Shut-Off DM Series Performance DM Series (1/8″) Test Fluid: Water 0 2 4 6 8 10 12 0 0.2 0.4 0.6 0.8 1 1.2 Flow in USGPM Pressure Drop in PSID 1/8″ How To Order DM – 12 1 – 4 Port Size (1/16 of a inch) 1= Valved Coupler 2= Valved Nipple DM Series 1/8″ Body Size FP FP= Female NPT MP= Male MPT Specifications Body Size (in.) 1/8″ Temperature Range -15°F to +400°F Rated Pressure 250 PSI Locking Device 5 Balls Rated Flow (GPM) 0.8 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-57 www.parker.com/quickcouplings Hydraulic Quick Couplings D E F G Nipples Female Pipe Thread A C B Couplers Female Pipe Thread A C B Male Pipe Thread D E G F Male Pipe Thread * This dimension represents the portion that is exposed when a nipple is inserted into a Parker DM Series coupler. Body New Old Thread Dimensions (in.) Size Part Part Size Overall Hex Largest Wt. (LB) (in.) No. No. NPTF Length Size Diameter P/Price A B C 1/8 DM-121-2FP CDM02-2-2Y 1/8-27 1.42 0.55 0.63 .06 1/8 DM-121-4FP CDM02-2-4Y 1/4-18 1.81 0.67 0.78 .10 Body New Old Thread Dimensions (in.) Size Part Part Size Overall Hex Largest Wt. (LB) (in.) No. No. NPTF Length Size Diameter P/Price A B C 1/8 DM-121-2MP CDM01-2-2Y 1/8-27 1.50 0.55 0.63 .06 1/8 DM-121-4MP CDM01-2-4Y 1/4-18 1.61 0.55 0.63 .07 Body New Old Thread Dimensions (in.) Size Part Part Size Overall Exposed Hex Largest Wt. (lb) (in.) No. No. NPTF Length Length* Size Diameter P/Price D E F G 1/8 DM-122-2FP NDM02-2-2Y 1/8-27 1.56 1.03 0.55 0.63 .05 1/8 DM-122-4FP NDM02-2-4Y 1/4-18 1.97 1.44 0.67 0.78 .09 Body New Old Thread Dimensions (in.) Size Part Part Size Overall Exposed Hex Largest Wt. (lb) (in.) No. No. NPTF Length Length* Size Diameter P/Price D E F G 1/8 DM-122-2MP NDM01-2-2Y 1/8-27 1.65 1.12 0.55 0.63 .05 1/8 DM-122-4MP NDM01-2-4Y 1/4-18 1.77 1.24 0.55 0.63 .06 * This dimension represents the portion that is exposed when a nipple is inserted into a Parker DM Series coupler. Special Purpose–Double Shut-Off DM Series B Hydraulics Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-58 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics Dust Plugs and Dust Caps Applications Parker offers a selection of dust plugs and caps for their hydraulic quick couplings. Most series shown in this section have a dust plug and cap specifically designed to be used with that style of coupling. Dust plugs and caps serve a twofold function. They keep the mating surface clean and free of contamination and protect the critical mating elements of the coupling halves when they are disconnected. In this way the nipple is protected from damage that would make the total coupling unusable. Protective dust plugs and caps play a crucial role in the use of quick couplings and no purchase of a hydraulic quick coupling is complete without the selection of an appropriate dust plug and cap. When ordering the dust cap/plug body size must correspond to that of the coupler or nipple. Parker’s full line of dust plugs and caps can be found below and on the following pages. Dust Plug: Used on Coupler (female half) Dust Cap: Used on Nipple (male half) Dust Plugs 60 Series SM Series 6600 Series Body Dust Plug Dust Plug Dust Cap Dust Cap Size Part No. Part No. Part No. Part No. (in.) Aluminum Rubber Aluminum Rubber 1/8 H1-65 H1-65M H1-66 H1-66M 1/4 H2-65 H2-65M H2-66 H2-66M 3/8 H3-65 H3-65M H3-66 H3-66M 1/2 H4-65 H4-65M H4-66 H4-66M 3/4 H6-65 H6-65M H6-66 H6-66M 1 H8-65 H8-65M H8-66 H8-66M 1 1/2 H12-65 NA H12-66 NA 2 1/2 H20P-65 NA H20P-66 NA NA = Not Available Body Size Dust Plug Dust Cap (in.) Part No. Part No. Material 1/4 PL-25 N/A Plastic 1/4 PR-25 CR-25 Rubber 1/4 P-25 C-25 Aluminum 1/2 DP-50 DC-50 Rubber 1/2 P-50 C-50 Aluminum 3/4 P-75 C-75 Aluminum Body Dust Plug Dust Cap Size Part No. Part No. (in.) Rubber Rubber 1/4 H1-65M H1-66M 3/8 TR-37 TR-37 1/2 5205-4M 5209-4M 3/4 6659-12M 6657-12M 1 6659-16M 6657-16M Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-59 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics Body Dust Plug Dust Plug Dust Cap Dust Cap Size Part No. Part No. Part No. Part No. (in.) Steel Rubber Steel Rubber 1/4 – 5205-2M* – 5209-2M* 3/8 – 5205-3M* – 5209-3M* 1/2 5005-4 5205-4M* 5009-4 5209-4M* 3/4 – 5205-5M* – 5209-5M* 1 – 5205-6M* – 5209-6M* * Designates all rubber material. (Not shown at left) Dust Plugs and Dust Caps 4000 Series & 5000 Series NS Series FF Series, FC Series, FH Series & FS Series 6100 Series Body Size Part Number (in.) Rubber 3/8 NR-37 1/2 NR-50 3/4 NR-75 1 NR-100 Protective cover fits either half. Body Dust Plug Dust Cap Size Part Number Part No. (in.) Rubber Rubber 1/4* FR-25 FR-25 3/8 NR-50 NR-37 1/2 FR-501 FR-502 3/4 FR-751 FR-752 1 FR-1001 FR-1002 * FR-25 fits both halves Body Dust Plug Dust Cap Size Part No. Part No. (in.) Brass Brass 3/4 6109-08 6108-08 1 6109-16 6108-16 1 1/4 6109-20 6108-20 1 1/2 6109-24 6108-24 HP Series Body Dust Plug Dust Cap Size Part Number Part No. (in.) Aluminum Aluminum 1 HPP-100 HPC-100 1 1/2 HPP-150 HPC-150 FEC Series, FEM Series Body Dust Plug Dust Cap Size Part Number Part No. (in.) Rubber Rubber 1/4 FR-25 FR-25 3/8 NR-50 NR-37 1/2 FR-501 FER-502 3/4 FR-751 FER-752 1 FR-1001 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-60 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics Dust Plugs and Dust Caps 9200 Series 3000 Series TC Series Body Size Part Number (in.) Rubber 3/8 TR-37 Protective cover fits either half. Body Dust Cap. Size Part No. (in.) Rubber 1/2 9507-4-1 Body Dust Plug Dust Cap Size Part No. Part No. (in.) Steel Steel 1/4 3005-2 3009-2 3/8 3005-3 3009-3 HO Series Body Size Used With Dust Plug Dust Cap (in.) HO Series Part No. Part No. Material Coupler/Nipple Part No. 1/4 HO-251/252-4FP TR-37 TR-37 Rubber 3/8 HO-371/372-6FP TR-37 TR-37 Rubber 1/2 HO-501-8FP DP-50 – Rubber 1/2 HO-502-8FP – DC-50 Rubber DC-50 TR-37 Plug / Cap Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-61 www.parker.com/quickcouplings Hydraulic Quick Couplings B Hydraulics Ordering Information When ordering Parker coupler bodies and nipples, please state the part number of each type of coupler body and each type of nipple desired. List coupler bodies and nipples as separate items rather than in combinations. Be sure to double check thread or hose sizes of items required. Many of Parker’s coupling products are available with unique non-standard options well suited to very specific applications. Examples of unusual end use applications might include: high temperatures (above 250° F), extremely caustic/corrosive solutions passing through the coupling, external/environmental corrosion situations, or other high wear and tear situations such as dragging the product along the ground. Please see the Fluid Compatibility Chart at the end of the catalog for a guide in selecting material for various media. It is always recommended that the Quick Coupling Division be contacted with any questions concerning specific product application needs. Typically, a prefix or suffix is added to the base part number to specify a non-standard O-ring seal, or special option such as a sleeve lock. The Optional Seals Suffix chart illustrates the designations. Please Note: Certain couplings series have additional “Special Order Information” which should be referred to in ordering those products. If applicable to the product, “Special Order Information” is found next to the Features and Specifications charts. Operation • Prefix “HD” for heavy duty nipple • Suffix “SL” for coupler sleeve-lok • Suffix “P” for poppet valve • Suffix “BP” for Push-lok hose barb • Suffix “VA” for Valve Actuator Optional Seals Suffix* No suffix is required when ordering products with the standard Nitrile seals. When specifying an optional seal, refer to the following chart to determine the appropriate suffix.** Coupling Series Ethylene Fluoro- Neoprene Perfluoro- Propylene carbon elastomer 60 Series W Y Z **** 6600 Series W Y Z **** SM Series E5 E4 E12 **** HP Series E5 E4 E12 **** 4000 Series W Y Z N/A 4200 Series W Y Z N/A NS Series E5 E4 N/A **** FF Series E5 E4 N/A **** Std. is E49 FH Series E5 E4 N/A **** FS Series E5 STD E12 **** 6100 Series W Y Z N/A 5000 Series W Y Z N/A 8200 Series W Y Z N/A 9200 Series W Y Z N/A 3000 Series TC Series 1141 Series ST Series W Y Z Water Service HO Series E5 E4 E12 N/A Moldmate Series N/A Y*** N/A N/A Std. is Silicone *To select proper seal materials, see Fluid Compatibility Chart in Appendices section, or contact your Parker Quick Coupling Distributor. **N/A = Not Available; STD = Standard (No Suffix Needed) *** Fluorocarbon seal available for use only with oil based media, not water glycol. **** Contact the division for Perfluoroelastomer Seal Options. Available with Fluorocarbon only (no suffix needed) Available with Polyurethane only (no suffix needed) Available with Nitrile only Available with Polyurethane only (no suffix needed) Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 B-62 www.parker.com/quickcouplings Hydraulic Quick Couplings Description These popular coupling key chains are now available from the Quick Coupling Division. The new key chains are an anodized aluminum construction available in an array of colors. Key chains can be ordered using part numbers in the following chart. Promotional Products Part Number Sleeve Color KEY-BK Black KEY-BU Blue KEY-GR Green KEY-RD Red KEY-CL Clear KEY-NI Old style nickel plated B Hydraulics CThermoplastics Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 C-1 www.parker.com/quickcouplings Thermoplastic Couplings Thermoplastic Couplings Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 C-2 www.parker.com/quickcouplings CThermoplastics Table of Contents Coupling Selection Guide………………………………..C-3 PPM -PPL Series ……………………………………………..C-4 Specifications………………………………………………….C-4 Couplers…………………………………………………………C-4 Nipples …………………………………………………………..C-5 PPA Series ………………………………………………………C-7 Specifications………………………………………………….C-7 Couplers…………………………………………………………C-7 Nipples …………………………………………………………..C-7 Spectrum Series ……………………………………………..C-8 Specifications………………………………………………….C-8 Couplers…………………………………………………………C-9 Nipples – Unvalved…………………………………………C-10 Nipples – Valved …………………………………………….C-11 PF Series……………………………………………………….C-12 Specifications………………………………………………..C-12 Couplers……………………………………………………….C-13 Nipples …………………………………………………………C-13 Dust Caps and Plugs……………………………………..C-13 Ordering Information……………………………………..C-14 Thermoplastic Couplings Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 C-3 www.parker.com/quickcouplings CThermoplastics Coupling Selection Guide Valving Coupler Style Body Size (in.) Material Locking Mechanism Std. Seal Material Temp Range** Rate Pressure PF Series Flush Face Non-Spill Push-to- Connect 1/2″, 1″& 2” Polypropylene/ Stainless Pawl lock Fluorocarbon +40° to +140° F 30 to 100 PSI Spectrum TM Series Valved or Unvalved Push-to- Connect 1/8″ & 3/8″ Acetal 316 SS Finger Lock Nitrile 0°F to 180°F 0 to 145 PSI Spectrum TM Series Spectrum TM Series Valved or Unvalved Valved or Unvalved Push-to- Connect Push-to- Connect 1/8″ & 3/8″ PVDF/SS 316 SS Finger Lock Fluorocarbon 0°F to 250°F 0 to 115 PSI 3/8″ PVDF/ PEEKTM Finger Lock Fluorocarbon 0°F to 250°F 15 to 115 PSI Optional Seals Suffix* Spectrum Series – are available with these materials Body Material Seal Material Acetal/SS Nitrile PVDF/SS Fluorocarbon PVDF/PEEK™ Fluorocarbon *To select proper seal materials, see Fluid Compatibility Chart in Appendices section, or contact your Parker Quick Coupling Distributor. **N/A = Not Available; STD = Standard (No Suffix Needed) No suffix is required when ordering products with the standard Fluorocarbon seals. When specifying an optional seal, refer to the following chart to determine the appropriate suffix.** Coupling Series Ethylene Neoprene Perfluoro- Propylene elastomer PF Series E5 E12 E47 Ordering Information PPMSeries Valved or Unvalved Push-to- Connect 1/8″ Acetal Copolymer/ Stainless Metal Push-Button Latch Nitrile -40°F to +180°F Vacuum to 120 PSIG PPLSeries Valved or Unvalved Push-to- Connect 1/4″ Acetal Copolymer/ Stainless Metal Push-Button Latch Nitrile -40°F to +180°F Vacuum to 120 PSIG PPASeries Valved or Unvalved Push-to- Connect 1/4″ Acetal Copolymer/ Stainless Plastic Push-Button Latch Nitrile -40°F to +180°F Vacuum to 120 PSIG Thermoplastic Couplings Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 C-4 www.parker.com/quickcouplings CThermoplastics Push-Button PPM & PPL Series Interconnects with similar metal latch push button couplings Body Valved or Size Non-Valved Part Number Port End L W H Part Number Port End L W H 1/8 Valved PPM-121-2MP 1/8” NPT 1.00 0.62 0.80 PPM-121-2MBT 1/8” BSPT 1.00 0.62 0.80 1/8 Valved PPM-121-4MP 1/4” NPT 1.10 0.62 0.80 PPM-121-4MBT 1/4” BSPT 1.10 0.62 0.80 1/8 Non-Valved PPM-123-2MP 1/8” NPT 1.00 0.62 0.80 PPM-123-2MBT 1/8” BSPT 1.00 0.62 0.80 1/8 Non-Valved PPM-123-4MP 1/4” NPT 1.10 0.62 0.80 PPM-123-4MBT 1/4” BSPT 1.10 0.62 0.80 1/4 Valved PPL-251-4MP 1/4” NPT 1.15 0.75 0.93 PPL-251-4MBT 1/4” BSPT 1.15 0.75 0.93 1/4 Valved PPL-251-6MP 3/8” NPT 1.15 0.75 0.93 PPL-251-6MBT 3/8” BSPT 1.15 0.75 0.93 1/4 Non-Valved PPL-253-4MP 1/4” NPT 1.15 0.75 0.93 PPL-253-4MBT 1/4” BSPT 1.15 0.75 0.93 1/4 Non-Valved PPL-253-6MP 3/8” NPT 1.15 0.75 0.93 PPL-253-6MBT 3/8” BSPT 1.15 0.75 0.93 PPM & PPL Series Couplers – Male Thread PPM & PPL Series Couplings are general purpose, thermoplastic couplings. The push-to-connect feature and push-button release provides simple one-handed operation. The couplers and nipples are available with or without valves and can be used in any combination. The light weight thermoplastic material resists dust. Standard seal material is Nitrile. Applications include: • Medical Devices • Laboratory Equipment • Chemical Processing • Food and Beverage • Industrial • Process Equipment L H W Male NPT Thread Male BSPT Thread PPM & PPL Series Specifications Flow Capacity Rated Pressure Temperature Material: Body Material: O-ring Latch & Springs PPM Series 1/8” -40° F to +180° F Acetal PPL Series 1/4” -40° C to +82° C Copolymer Vacuum to 120 PSI Stainless Steel Nitrile Thermoplastic Couplings Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 C-5 www.parker.com/quickcouplings CThermoplastics Push-Button PPM & PPL Series Body Valved or Size Non-Valved Port End Part Number L W H Part Number L W H 1/8 Valved 1/8” Hose Barb, In-line PPM-121-2HB 1.65 0.62 0.80 PPM-121-H2HB 1.65 0.62 0.80 1/8 Valved 3/16” Hose Barb, In-line PPM-121-3HB 1.80 0.62 0.80 PPM-121-H3HB 1.80 0.62 0.80 1/8 Valved 1/4” Hose Barb, In-line PPM-121-4HB 1.80 0.62 0.80 PPM-121-H4HB 1.80 0.62 0.80 1/8 Non-Valved 1/8” Hose Barb, In-line PPM-123-2HB 1.65 0.62 0.80 1/8 Non-Valved 3/16” Hose Barb, In-line PPM-123-3HB 1.80 0.62 0.80 1/8 Non-Valved 1/4” Hose Barb, In-line PPM-123-4HB 1.80 0.62 0.80 1/4 Valved 1/4” Hose Barb, In-line PPL-251-4HB 1.90 0.75 0.93 PPL-251-H4HB 1.88 0.75 0.93 1/4 Valved 5/16” Hose Barb, In-line PPL-251-5HB 1.95 0.75 0.93 1/4 Valved 3/8” Hose Barb, In-line PPL-251-6HB 1.90 0.75 0.93 PPL-251-H6HB 1.88 0.75 0.93 1/4 Non-Valved 1/4” Hose Barb, In-line PPL-253-4HB 1.90 0.75 0.93 1/4 Non-Valved 5/16” Hose Barb, In-line PPL-253-5HB 1.95 0.75 0.93 1/4 Non-Valved 3/8” Hose Barb, In-line PPL-253-6HB 1.90 0.75 0.93 PPM & PPL Series Couplers – Hose Barb Hose Barb Bulkhead Hose Barb with Nut W L H Body Valved or Size Non-Valved Part Number Port End L W H Part Number Port End L W H 1/8 Valved PPM-122-2MP 1/8” NPT 1.27 0.50 0.50 PPM-122-2MBT 1/8” BSPT 1.27 0.50 0.50 1/8 Valved PPM-122-4MP 1/4” NPT 1.29 0.56 0.56 PPM-122-4MBT 1/4” BSPT 1.29 0.56 0.56 1/8 Non-Valved PPM-124-2MP 1/8” NPT 1.03 0.49 0.49 PPM-124-2MBT 1/8” BSPT 1.03 0.49 0.49 1/8 Non-Valved PPM-124-4MP 1/4” NPT 1.13 0.56 0.56 PPM-124-4MBT 1/4” BSPT 1.13 0.56 0.56 1/4 Valved PPL-252-4MP 1/4” NPT 1.50 0.62 0.62 PPL-252-4MBT 1/4” BSPT 1.50 0.62 0.62 1/4 Valved PPL-252-6MP 3/8” NPT 1.65 0.75 0.75 PPL-252-6MBT 3/8” BSPT 1.65 0.75 0.75 1/4 Non-Valved PPL-254-4MP 1/4” NPT 1.26 0.62 0.62 PPL-254-4MBT 1/4” BSPT 1.26 0.62 0.62 1/4 Non-Valved PPL-254-6MP 3/8” NPT 1.25 0.75 0.75 PPL-254-6MBT 3/8” BSPT 1.25 0.75 0.75 PPM & PPL Series Nipples – Male Thread W L H Male NPT Thread Male BSPT Thread Thermoplastic Couplings Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 C-6 www.parker.com/quickcouplings CThermoplastics Push-Button PPM & PPL Series Body Valved or Size Non-Valved Port End Part Number L W H Part Number L W H 1/8 Valved 1/8” Hose Barb, In-line PPM-122-2HB 0.97 0.55 0.55 PPM-122-H2HB 1.61 0.62 0.62 1/8 Valved 1/8” Hose Barb, 90° PPM-122-C2HB 1.09 0.50 0.95 1/8 Valved 3/16” Hose Barb, In-line PPM-122-3HB 1.12 0.55 0.55 PPM-122-H3HB 1.76 0.62 0.62 1/8 Valved 1/4” Hose Barb, In-line PPM-122-4HB 1.12 0.55 0.55 PPM-122-H4HB 1.76 0.62 0.62 1/8 Valved 1/4” Hose Barb, 90° PPM-122-C4HB 1.09 0.50 1.10 1/8 Non-Valved 1/8” Hose Barb, In-line PPM-124-2HB 0.97 0.50 0.50 1/8 Non-Valved 1/8” Hose Barb, 90° PPM-124-C2HB 0.86 0.50 1.10 1/8 Non-Valved 3/16” Hose Barb, In-line PPM-124-3HB 1.12 0.50 0.50 PPM-124-H3HB 1.76 0.62 0.62 1/8 Non-Valved 1/4” Hose Barb, In-line PPM-124-4HB 1.12 0.50 0.50 1/8 Non-Valved 1/4” Hose Barb, 90° PPM-124-C4HB 0.98 0.50 1.15 1/4 Valved 1/4” Hose Barb, In-line PPL-252-4HB 1.80 0.70 0.70 PPL-252-H4HB 1.87 0.74 0.74 1/4 Valved 1/4” Hose Barb, 90° PPL-252-C4HB 1.19 0.62 1.23 1/4 Valved 5/16” Hose Barb, In-line PPL-252-5HB 1.85 0.70 0.70 1/4 Valved 3/8” Hose Barb, In-line PPL-252-6HB 1.67 0.70 0.70 PPL-252-H6HB 1.84 0.74 0.74 1/4 Valved 3/8” Hose Barb, 90° PPL-252-C6HB 1.24 0.62 1.23 1/4 Non-Valved 1/4” Hose Barb, In-line PPL-254-4HB 1.25 0.62 0.62 1/4 Non-Valved 1/4” Hose Barb, 90° PPL-254-C4HB 1.10 0.62 1.27 1/4 Non-Valved 5/16” Hose Barb, In-line PPL-254-5HB 1.28 0.62 0.62 1/4 Non-Valved 3/8” Hose Barb, In-line PPL-254-6HB 1.25 0.62 0.62 1/4 Non-Valved 3/8” Hose Barb, 90° PPL-254-C6HB 1.10 0.62 1.23 PPM & PPL Series Nipples – Hose Barb Hose Barb Bulkhead Hose Barb with Nut L W & H Thermoplastic Couplings Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 C-7 www.parker.com/quickcouplings CThermoplastics Push-Button PPA Series Interconnects with similar plastic latch push button couplings PPA Series Couplings are general purpose, thermoplastic couplings. The PPA couplers are push-toconnect and have a plastic latch for push-button release. With a fully plastic exterior and smooth face, they are nonmarring to most surfaces. Note: Does not interchange with PPL Series. Applications include: • Medical Devices • Laboratory Equipment • Chemical Processing • Food and Beverage • Industrial • Process Equipment PPA Series Specifications Flow Capacity Rated Pressure Temperature Material: Material: O-ring Body & Latch Springs PPA Series 1/4” Vacuum to 120 PSIG – 40° F to +180° F Acetal Copolymer Stainless Steel Nitrile – 40° F to + 82° C Body Size Part Number Valved Port End L H Part Number Valved Port End L H 1/4 PPA-251-4HB Yes 1/4” Hose Barb 2.03 0.93 PPA-253-4HBSB No 1/4” Hose Barb 1.36 0.93 1/4 PPA-251-6HB Yes 3/8” Hose Barb 2.04 0.93 PPA-253-6HBSB No 3/8” Hose Barb 1.36 0.93 PPA Series Couplers – Hose Barb Valved Coupler Non-Valved Coupler L H L H Body Size Part Number Valved Port End L H Part Number Valved Port End L H 1/4 PPA-252-4HB Yes 1/4” Hose Barb 1.89 0.71 PPA-254-4HB No 1/4” Hose Barb 1.35 0.63 1/4 PPA-252-6HB Yes 3/8” Hose Barb 1.75 0.71 PPA-254-6HB No 3/8” Hose Barb 1.36 0.61 PPA Series Nipples – Hose Barb Valved Nipple Non-Valved Nipple L H L H Thermoplastic Couplings Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 C-8 www.parker.com/quickcouplings CThermoplastics Push-To-Connect Spectrum™ Series Applications Parker’s Spectrum™ Series couplers are the most advanced engineered thermoplastic couplings available. Spectrum Series couplings combine compact size, high flow capability, and light weight design to meet a broad range of coupling applications. Three material combinations allow the couplings to be used in markets as diverse as chemical processing, automation equipment, semi-conductor and food processing. Spectrum Series can be used in many applications previously reserved for stainless steel couplings. Features • Excellent Chemical Compatibility • Three Material Combinations: Acetal/SS, PVDF/SS and PVDF/PEEK™ • High Flow Capacity • Easy Push-To-Connect Operation • Available Valved and Unvalved • Flexible Modular Design • Four Point 360° Locking Mechanism • Temperatures Up To 250° F • Panel Mounting Option Performance Spectrum Series (1/8″) Test Fluid: Water 0 5 10 15 20 25 0 0.5 1 1.5 2 Flow in USGPM Pressure Drop in PSID Double Shut Off Single Shut Off Straight Through Spectrum Series (3/8″) Test Fluid: Water 0 5 10 15 20 25 30 35 40 0 1 2 3 4 5 6 Flow in USGPM Pressure Drop in PSID Double Shut Off Single Shut Off Straight Through 2 CV V – Valved S – Straight thru Body Size 2 – 1/8 Inch 6 – 3/8 Inch C – Coupler N – Nipple P – Panel mount coupler A A – Acetal P – PVDF K – PVDF/PEEK™ – 04 – FP FP – Female pipe MP – Male pipe HB – Standard hose barb BHB – Bulkhead hose barb Port Size 16ths S – Spectrum Series Thermoplastic Couplings How To Order Specifications Acetal/SS PVDF/SS PVDF/PEEK™ (black with grey sleeve) (translucent with green sleeve) (translucent) Body Size 1/8 3/8 1/8 3/8 3/8 Pressure Range 0-145 psi 0-145 psi 0-115 psi 0-115 psi 15-115 psi (0-10 bar) (0-10 bar) (0-8 bar) (0-8 bar) (1-8 bar) Temperature Range 0° F to 180° F 0° F to 180° F 0° F to 250° F 0° F to 250° F 0° F to 250° F (-20° C to +80° C) (-20° C to +80° C) (-20° C to +120° C) (-20° C to +120° C) (-20° C to +120° C) Rated Flow 1.5 GPM 4.5 GPM 1.5 GPM 4.5 GPM 4.5 GPM (5.6 lpm) (17 lpm) (5.6 lpm) (17 lpm) (17 lpm) Body Material Acetal Acetal PVDF PVDF PVDF Spring Material 316 SS 316 SS 316 SS 316 SS PEEK™ Seal Material Nitrile Nitrile Fluorocarbon Fluorocarbon Fluorocarbon Thermoplastic Couplings Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 C-9 www.parker.com/quickcouplings CThermoplastics C B D A C B A Couplers Male Pipe Female Pipe Push-To-Connect Spectrum™ Series Hose Barb Bulkhead Hose Barb Panel Mount Couplers Hose Barb Female Pipe C B A C B D A C B D A * NOTE:To Order Unvalved Coupler replace “V” with an “S”. Body Acetal* PVDF* PVDF/PEEK™* Port Overall Hex Largest Size (in.) Part No. Part No. Part No. NPT Length Size Diameter A B C 1/8 S2-ACV-02-FP S2-PCV-02-FP — 1/8-27 2.15 .67 .82 1/8 S2-ACV-04-FP S2-PCV-04-FP — 1/4-18 2.34 .67 .82 3/8 S6-ACV-04-FP S6-PCV-04-FP S6-KCV-04-FP 1/4-18 2.63 .82 1.02 3/8 S6-ACV-06-FP S6-PCV-06-FP S6-KCV-06-FP 3/8-18 2.63 .82 1.02 3/8 S6-ACV-08-FP S6-PCV-08-FP S6-KCV-08-FP 1/2-14 3.10 .82 1.02 Body Acetal* PVDF* PVDF/PEEK™* Port Overall Hex Largest Size (in.) Part No. Part No. Part No. NPT Length Size Diameter A B C 1/8 S2-ACV-02-MP S2-PCV-02-MP — 1/8-27 2.04 .67 .82 1/8 S2-ACV-04-MP S2-PCV-04-MP — 1/4-18 2.15 .67 .82 3/8 S6-ACV-04-MP S6-PCV-04-MP S6-KCV-04-MP 1/4-18 2.90 .82 1.02 3/8 S6-ACV-06-MP S6-PCV-06-MP S6-KCV-06-MP 3/8-18 2.77 .82 1.02 3/8 S6-ACV-08-MP S6-PCV-08-MP S6-KCV-08-MP 1/2-14 3.10 .82 1.02 Body Acetal* PVDF* PVDF/PEEK™* Hose Overall Hex Largest Size (in.) Part No. Part No. Part No. I.D. Length Size Diameter A B C 1/8 S2-ACV-03-HB S2-PCV-03-HB — 3/16 2.34 .67 .82 (4 mm) 1/8 S2-ACV-04-HB S2-PCV-04-HB — 1/4 2.34 .67 .82 (6 mm) 3/8 S6-ACV-04-HB S6-PCV-04-HB S6-KCV-04-HB 1/4 3.19 .82 1.02 (6 mm) 3/8 S6-ACV-06-HB S6-PCV-06-HB S6-KCV-06-HB 3/8 3.19 .82 1.02 (9 mm) 3/8 S6-ACV-08-HB S6-PCV-08-HB S6-KCV-08-HB 1/2 3.31 .82 1.02 (13 mm) Body Acetal* PVDF* PVDF/PEEK™ Hose Overall Hex Largest Bulkhead Size (in.) Part No. Part No. Part No. I.D. Length Size Diameter Hex A B C D 1/8 S2-ACV-03-BHB S2-PCV-03-BHB — 3/16 2.89 .67 .82 .67 (4 mm) 1/8 S2-ACV-04-BHB S2-PCV-04-BHB — 1/4 2.89 .67 .82 .67 (6 mm) Body Acetal* PVDF* PVDF/PEEK™ Hose Overall Hex Largest Bulkhead Size (in.) Part No. Part No. Part No. I.D. Length Size Diameter Hex A B C D 1/8 S2-APV-02-FP S2-PPV-02-FP — 1/8-27 2.04 .67 1.10 1.06 1/8 S2-APV-04-FP S2-PPV-04-FP — 1/4-18 2.16 .67 1.10 1.06 Body Acetal* PVDF* PVDF/PEEK™ Hose Overall Hex Largest Bulkhead Size (in.) Part No. Part No. Part No. I.D. Length Size Diameter Hex A B C D 1/8 S2-APV-03-HB S2-PPV-03-HB — 3/16 2.34 .67 1.10 1.06 (4 mm) 1/8 S2-APV-04-HB S2-PPV-04-HB — 1/4 2.34 .67 1.10 1.06 (6 mm) C B A Thermoplastic Couplings Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 C-10 www.parker.com/quickcouplings CThermoplastics Nipples – Unvalved Male Pipe Push-To-Connect Spectrum™ Series Female Pipe Hose Barb Bulkhead Hose Barb C B D A C B A C B A B A Body Acetal PVDF PVDF/PEEK™ Port Overall Hex Largest Size (in.) Part No. Part No. Part No. NPT Length Size Diameter A B C 1/8 S2-ANS-02-MP S2-PNS-02-MP — 1/8-27 1.08 .55 .62 1/8 S2-ANS-04-MP S2-PNS-04-MP — 1/4-18 1.24 .67 .76 3/8 S6-ANS-04-MP S6-PNS-04-MP — 1/4-18 1.64 .67 .73 3/8 S6-ANS-06-MP S6-PNS-06-MP — 3/8-18 1.64 .83 .91 3/8 S6-ANS-08-MP S6-PNS-08-MP — 1/2-14 1.83 .94 1.04 Body Acetal PVDF PVDF/PEEK™ Hose Overall Largest Size (in.) Part No. Part No. Part No. I.D. Length Diameter A B 1/8 S2-ANS-03-HB S2-PNS-03-HB — 3/16 1.26 .34 (4 mm) 1/8 S2-ANS-04-HB S2-PNS-04-HB — 1/4 1.26 .34 (6 mm) 3/8 S6-ANS-04-HB S6-PNS-04-HB — 1/4 1.86 .71 (6 mm) 3/8 S6-ANS-06-HB S6-PNS-06-HB — 3/8 1.87 .71 (9 mm) 3/8 S6-ANS-08-HB S6-PNS-08-HB — 1/2 1.99 .71 (13 mm) Body Acetal PVDF PVDF/PEEK™ Hose Overall Hex Largest Bulkhead Size (in.) Part No. Part No. Part No. I.D. Length Size Diameter Hex A B C D 1/8 S2-ANS-03-BHB S2-PNS-03-BHB — 3/16 1.97 .55 .64 .55 (4 mm) 1/8 S2-ANS-04-BHB S2-PNS-04-BHB — 1/4 1.97 .55 .77 .67 (6 mm) Body Acetal PVDF PVDF/PEEK™ Port Overall Hex Largest Size (in.) Part No. Part No. Part No. NPT Length Size Diameter A B C 1/8 S2-ANS-02-FP S2-PNS-02-FP — 1/8-27 1.02 .55 .62 1/8 S2-ANS-04-FP S2-PNS-04-FP — 1/4-18 1.18 .67 .76 3/8 S6-ANS-04-FP S6-PNS-04-FP — 1/4-18 1.52 .67 .73 3/8 S6-ANS-06-FP S6-PNS-06-FP — 3/8-18 1.52 .83 .91 3/8 S6-ANS-08-FP S6-PNS-08-FP — 1/2-14 1.68 .98 1.09 Thermoplastic Couplings Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 C-11 www.parker.com/quickcouplings CThermoplastics C B A Push-To-Connect Spectrum™ Series Hose Barb Bulkhead Hose Barb Nipples –Valved Male Pipe Female Pipe C B D A C B A Body Acetal PVDF PVDF/PEEK™ Hose Overall Hex Largest Size (in.) Part No. Part No. Part No. I.D. Length Size Diameter A B C 1/8 S2-ANV-03-HB S2-PNV-03-HB — 3/16 1.80 .67 .76 (4 mm) 1/8 S2-ANV-04-HB S2-PNV-04-HB — 1/4 1.80 .67 .76 (6 mm) 3/8 S6-ANV-04-HB S6-PNV-04-HB S6-KNV-04-HB 1/4 2.59 .82 .91 (6 mm) 3/8 S6-ANV-06-HB S6-PNV-06-HB S6-KNV-06-HB 3/8 2.59 .82 .91 (9 mm) 3/8 S6-ANV-08-HB S6-PNV-08-HB S6-KNV-08-HB 1/2 2.71 .82 .91 (13 mm) Body Acetal PVDF PVDF/PEEK™ Hose Overall Hex Largest Bulkhead Size (in.) Part No. Part No. Part No. I.D. Length Size Diameter Hex A B C D 1/8 S2-ANV-03-BHB S2-PNV-03-BHB — 3/16 2.35 .67 .76 .55 (4 mm) 1/8 S2-ANV-04-BHB S2-PNV-04-BHB — 1/4 2.35 .67 .76 .55 (6 mm) Body Acetal PVDF PVDF/PEEK™ Port Overall Hex Largest Size (in.) Part No. Part No. Part No. NPT Length Size Diameter A B C 1/8 S2-ANV-02-FP S2-PNV-02-FP — 1/8-27 1.61 .67 .76 1/8 S2-ANV-04-FP S2-PNV-04-FP — 1/4-18 1.80 .67 .76 3/8 S6-ANV-04-FP S6-PNV-04-FP S6-KNV-04-FP 1/4-18 2.02 .83 .91 3/8 S6-ANV-06-FP S6-PNV-06-FP S6-KNV-06-FP 3/8-18 2.02 .83 .91 3/8 S6-ANV-08-FP S6-PNV-08-FP S6-KNV-08-FP 1/2-14 2.49 .83 .91 Body Acetal PVDF PVDF/PEEK™ Port Overall Hex Largest Size (in.) Part No. Part No. Part No. NPT Length Size Diameter A B C 1/8 S2-ANV-02-MP S2-PNV-02-MP — 1/8-27 1.49 .67 .76 1/8 S2-ANV-04-MP S2-PNV-04-MP — 1/4-18 1.80 .67 .76 3/8 S6-ANV-04-MP S6-PNV-04-MP S6-KNV-04-MP 1/4-18 2.24 .83 .91 3/8 S6-ANV-06-MP S6-PNV-06-MP S6-KNV-06-MP 3/8-18 2.16 .83 .91 3/8 S6-ANV-08-MP S6-PNV-08-MP S6-KNV-08-MP 1/2-14 2.49 .83 .91 C B A Thermoplastic Couplings Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 C-12 www.parker.com/quickcouplings CThermoplastics Applications • Chemical Dispensing Systems • Spray Application Equipment • Mini Bulk Tanks • Replacement for Banjo Style Camlok Fittings & Ball Valves • Bulk Transfer Barrels Specifications (1) Also available in EPDM, Nitrile, Neoprene, Perfluoroelastomer Features The Parker PF Series Dry Disconnect couplings virtually eliminate fluid loss upon disconnection and are designed to help meet the demand for closed system transfer and dispensing of chemicals and fluids with minimal environmental contamination. They can be used with concentrated or diluted industrial chemicals, fertilizers, herbicides, insecticides, fungicides or pesticides when transferring from bulk storage tanks, returnable containers, applicators, etc. The PF Series 2″ body size is ideal for large bulk transfer of fluids and eliminating fluid spillage when connecting and disconnecting. Additional features include: • Rugged Glass filled Polypropylene construction for chemical compatibility and reduced cost. • Push-to-connect design. • Flush face valves exhibit minimal spillage upon connect or disconnect and air inclusion on connect, and enables ease of cleaning. • PTFE coated Fluorocarbon tank gasket for improved chemical compatiblity. • 1″ coupler has non-wetted springs. Body Size 1/2″ 1″ 2” Materials: Body Polypropylene Springs 316 Stainless Steel Seals Fluorocarbon(1) Rated Pressure 100 PSI 60 PSI 100 PSI (at 68° F) Rated Flow 12 GPM 20 GPM 50 GPM Pressure Drop 11.3 PSI 3.4 PSI 4 PSI at Rated Flow Force to Connect 32 lbs. 41 lbs. 54 lbs. Force to Disconnect 12 lbs. 17 lbs. 17 lbs. Operating Temp. +40°F to +140° F Storage Temp. -20°F to +140° F Maximum Spillage 0.14 ml 1ml 9 ml per Disconnect .01 cu. in. .06 cu. in. (1cc) .5 cu. in. Vacuum Rating 27.4 Hg Contact Factory Contact Factory1 Non-Spill Couplings PF Series – Chemical Transfer Couplings PF (1/2″, 1″, 2″) Test Fluid: Water 0 5 10 15 20 25 0 10 20 30 40 50 60 70 Flow in USGPM Pressure Drop in PSID 1/2″ 1″ 2″ Performance Thermoplastic Couplings Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 C-13 www.parker.com/quickcouplings CThermoplastics Nipple Dust Cap FR-502 Coupler Dust Cap FR-501 Body Tank Overall Largest Wrench Wt. (LB.) Size Part Port* Mount Length Diameter Flats P/Piece (in.) No. Thread Thread A B 1/2 PF-502-8FP 1/2″ NPT None 2.96 1.33 1.24 0.09 1 PF-1002-16FP 1″ NPT None 3.92 2.20 1.87 0.26 2 PF-2002-32FP 2” NPT None 5.71 3.55 – 0.75 * Female NPT Threads standard. For other port options contact the division. Non-Spill Couplings PF Series – Non-Spill Chemical Transfer Couplings Dust Caps and Plugs A B 1″ NPT Nipples A B 1″ NPT 2-11 1/2 NPS Modified Thread Fluorocarbon Gasket Couplers A B 1″ NPT Nipple Dust Cap PFR-1002 Nipple Dust Cap (Tank Mount) PFR-1002-NS Body Tank Overall Largest WrenchWt. (LB.) Size Part Port* Mount Length Diameter Flats P/Piece (in.) No. Thread Thread A B 1 PF-1002-32MB 1″ NPT Modified 3.92 2.75 1.87 0.33 Buttress 1 PF-1002-32MP 1″ NPT Modified 3.92 2.75 1.87 0.31 NPS * Female NPT Threads standard. For other port options contact the division. A B 1″ NPT 2 1/2 -5 Modified 5°/45° Buttress Thread Fluorocarbon Gasket Body Part Port* Overall Largest Wrench Wt. (LB.) Size (in.) No. Thread Length Diameter Flats P/Piece A B 1/2 PF-501-8FP 1/2″NPT 3.02 1.88 1.38 0.18 1 PF-1001-16FP 1″ NPT 3.99 3.00 1.99 0.53 2 PF-2001-32FP 2” NPT 6.63 5.00 – 1.75 * Female NPT Threads standard. For other port options contact the division. * For use with Tank Mount Nipples Nipples – Tank Mount Body Coupler Dust Cap Nipple Dust Cap Material Size (in.) Part No. Part No. 1/2 FR-501 FR-502 Synthetic Rubber 1 None PFR-1002 Ethylene Propylene 1 None PFR-1002-NS* Ethylene Propylene Thermoplastic Couplings Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 C-14 www.parker.com/quickcouplings CThermoplastics Ordering Information When ordering Parker coupler bodies and nipples, please state the part number of each type of coupler body and each type of nipple desired. List coupler bodies and nipples as separate items rather than in combinations. Be sure to double check thread or hose sizes of items required. Many of Parker’s coupling products are available with unique non-standard options well suited to very specific applications. Examples of unusual end use applications might include: high temperatures (above 250° F), extremely caustic/corrosive solutions passing through the coupling, external/environmental corrosion situations, or other high wear and tear situations such as dragging the product along the ground. Please see the Fluid Compatibility Chart at the end of the catalog for a guide in selecting material for various media. It is always recommended that the Quick Coupling Division be contacted with any questions concerning specific product application needs. Please Note: Certain couplings series have additional “Special Order Information” which should be referred to in ordering those products. If applicable to the product, “Special Order Information” is found next to the Features and Specifications charts. Optional Seals Suffix* Spectrum Series – are available with these materials Body Material Seal Material Acetal/SS Nitrile PVDF/SS Fluorocarbon PVDF/PEEK™ Fluorocarbon * To select proper seal materials, see Fluid Compatibility Chart in Appendices section, or contact your Parker Quick Coupling Distributor. ** N/A = Not Available; STD = Standard (No Suffix Needed) *** Parofluor™ **** DuPont Kalrez™ No suffix is required when ordering products with the standard Fluorocarbon seals. When specifying an optional seal, refer to the following chart to determine the appropriate suffix.** Coupling Series Ethylene Neoprene Perfluoro- Propylene elastomer PF Series E5 E12 E35*** E47**** D Swivels Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 D-1 www.parker.com/quickcouplings Swivels Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 D-2 www.parker.com/quickcouplings D Swivels General Introduction Applications Some common markets and applications for swivels are: • Injection Molding • Pulp and Paper • Logging • Refuse Trucks • Utility Equipment • Mobile Equipment • Flight Simulators • Car Washes • Hose Reels • Pressure Washers • Machine Tools • Steel Mills • Palletizers • And many more… Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 D-3 www.parker.com/quickcouplings Swivels D Swivels Table of Contents Applications ……………………………………………………D-1 PS Series Introduction …………………………………………………….D-4 How To Order ………………………………………………….D-5 In-Line ……………………………………………………………D-6 90°……………………………………………………………….D-12 Repair Kits ……………………………………………………D-21 Seal Options …………………………………………………D-21 S Series Introduction …………………………………………………..D-22 How To Order………………………………………………..D-23 90°……………………………………………………………….D-24 Repair Kits ……………………………………………………D-28 Seal Options …………………………………………………D-28 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 D-4 www.parker.com/quickcouplings Swivels D Swivels Introduction PS Series Introduction The design and manufacturing processes vital to a swivel’s quality are the cornerstone of the Quick Coupling Division’s day to day operations. The PS Series Swivel is designed to meet the application needs and performance requirements of the market. Pressure capabilities up to 5000 psi, 1/4″ through 2″ body sizes, a variety of port options, Chromium-6 Free or nickel plating and a wide range of seal options make the PS Series Swivels ideal for an array of dynamic applications. 0 1000 2000 3000 4000 5000 Torque vs. Pressure Torque (in-lbs) 1″ 3/4″ 1/2″ 3/8″ 1/4″ 45 40 35 30 25 20 15 10 5 0 Pressure (PSI) Performance Data 0 10 20 30 40 50 60 70 80 90 90 PS Swivel 150 SUS Oil Flow vs. Pressure Drop Pressure Drop (psid) 1″ 3/4″ 1/2″ 3/8″ 1/4″ 0 5 10 15 20 25 30 35 40 Flow (USGPM) 0 1000 2000 3000 4000 5000 Recommended Max. Speed vs. Pressure RPM Pressure (PSI) 1-1/2″ 2″ 1″ 3/4″ 1/2″ 3/8″ 1/4″ 50 45 40 35 30 25 20 15 10 5 0 Specifications Body Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 Maximum Rated Pressure (PSI) 5000 5000 5000 5000 5000 4000 4000 3000 Except the following port options in the noted size 03 (Male JIC 37°) 3000 2000 05 (Male SAE O-Ring Boss) 2500 06 (Female JIC 37°) 90° Housing Port 4000 3000 3000 2500 2000 06 (Female JIC 37°) In-Line Housing Port 3000 2000 07 (Female NPSM) 4600 3000 2600 2100 1650 1500 Temperature Range (std seals) -40° to 250° F -30° to 180° F Features • Hardened bearing races for extended service life. • Full flow design minimizes pressure drop for optimum system performance. • Sealed bearing design isolates bearing race from media and environment. • Reduced bearing load design minimizes wear in the bearing race and extends service life. • PTFE back-up rings support primary seal for high-pressure applications. • Chromium-6 Free plating for maximum corrosion resistance. • Variety of seal options available. • Three piece swivel design for sizes 1 1/4″ through 2″ for superior performance and service life. • Precision needle bearings and ball bearings sized 1 1/4″ through 2″ for additional side load resistance. • Polyurethane U-Cup primary seal standard for sizes 1 1/4″ through 2″. • PS Series Swivels eliminate hose twist and torque that may cause premature hose failure. Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 D-5 www.parker.com/quickcouplings Swivels D Swivels How To Order PS Series 90° Swivels Parker Swivel designator Housing Port Configuration: 01 = Male NPTF(Non-Standard)* 02 = Female NPTF 03 = Male JIC 37 Degree 05 = Male SAE O-Ring Straight Thread 06 = Female JIC 37 Degree 07 = Female NPSM Pipe Swivel 10 = Female SAE Straight Thread Material and Finish: Blank = Carbon Steel w/Chromium-6 Free Plating (Std.) NI = Carbon Steel with Electroless Nickel Plating* S3 = 303 Stainless Steel Passivated* S6 = 316 Stainless Steel Electropolished* Housing Port Size (1/16 of an inch)†† Shaft Port Size (1/16 of an inch)†† *Contact Division for price and delivery † On -24 and -32 sizes, Polyurethane U-Cup Seal is standard. †† For -20 Ports, -24 Body is used. PS Part Number: PS 16 1 02 02 – 16 – 16 Y – Shaft Port Configuration: 01 = Male NPTF 02 = Female NPTF 03 = Male JIC 37 Degree 05 = Male SAE O-Ring Straight Thread 10 = Female SAE Straight Thread Configuration: 1 = In-line 9 = 90 degree Seal Code: Blank = Nitrile† A = Aflas™* W = Ethylene Propylene Y = Fluorocarbon Z = Neoprene For Perfluoroelastomer Seal Option Contact the Division. Body Size (1/16 of an inch) In-Line Swivels Shaft Housing Shaft Housing Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 D-6 www.parker.com/quickcouplings Swivels D Swivels Housing O-Ring O-Ring Cap Screw Bearing Shaft Materials Of Construction Back-up Ring Housing*: ……………………………………………………Carbon Steel Shaft*:………………………………………………………..Carbon Steel Plating:*……………………………………………….Chromium-6 Free Bearing:* ……………………………………………………………Chrome O-Rings:*………………………………………………………………Nitrile Back-Up Ring:………………………………………………………..PTFE * See How-To-Order for optional material, plating, and seals. In-Line PS Series Hex 1 Port 1 Hex 2 Port 2 A B Male Pipe – Female Pipe Part Number A B Hex 1 Hex 2 Port 1 Port 2 PS410102-4-4 2.59” 1.60” .75” 1.19” 1/4-18 1/4-18 65.8 mm 40.6 mm 19.0 mm 30.2 mm NPTF NPTF PS610102-6-6 2.66” 1.64” .88” 1.31” 3/8-18 3/8-18 67.5 mm 41.7 mm 22.2 mm 33.3 mm NPTF NPTF PS810102-8-8 3.03” 1.79” 1.12” 1.50” 1/2-14 1/2-14 76.8 mm 45.5 mm 28.6 mm 36.5 mm NPTF NPTF PS1210102-12-12 3.10” 1.85” 1.38” 1.69” 3/4-14 3/4-14 78.8 mm 47.0 mm 35.0 mm 42.9 mm NPTF NPTF PS1610102-16-16 3.54” 2.11” 1.62” 1.88” 1-11 1/2 1-11 1/2 89.8 mm 53.5 mm 41.3 mm 47.6 mm NPTF NPTF Part Number A B Hex 1 Hex 2 Port 1 Port 2 PS410103-4-4 2.86” 1.87” .75” 1.19” 1/4-18 7/16-20 72.6 mm 47.5 mm 19.0 mm 30.2 mm NPTF UNF PS610103-6-6 2.92” 1.90” .88” 1.31” 3/8-18 9/16-18 74.1 mm 48.3 mm 22.2 33.3 mm NPTF UNF PS810103-8-8 3.33” 2.09” 1.12” 1.50” 1/2-14 3/4-16 84.5 mm 53.1 mm 28.6 mm 36.5 mm NPTF UNF PS1210103-12-12 3.55” 2.30” 1.38” 1.69” 3/4-14 1-1/16-12 90.3 mm 58.4 mm 35.0 mm 42.9 mm NPTF UN PS1610103-16-16 3.88” 2.45” 1.62” 1.88” 1-11 1/2 1-5/16-12 98.6 mm 62.2 mm 41.3 mm 47.6 mm NPTF UN Hex 1 Port 1 Hex 2 Port 2 A B Male Pipe – Male 37° Flare Part Number A B Hex 1 Hex 2 Port 1 Port 2 PS410106-4-4 2.72” 1.73” .75” 1.19” 1/4-18 7/16-20 69.1 mm 43.9 mm 19.0 mm 30.2 mm NPTF UNF PS610106-6-6 2.77” 1.75” .88” 1.31” 3/8-18 9/16-18 70.3 mm 44.5 mm 22.2 mm 33.3 mm NPTF UNF PS810106-8-8 3.05” 1.81” 1.12” 1.50” 1/2-14 3/4-16 77.3 mm 46.0 mm 28.6 mm 36.5 mm NPTF UNF PS1210106-12-12 3.27” 2.02” 1.38” 1.69” 3/4-14 1-1/16-12 83.2 mm 51.3 mm 35.0 mm 42.9 mm NPTF UN PS1610106-16-16 3.62” 2.19” 1.62” 1.88” 1-11 1/2 1-5/16-12 92.0 mm 55.6 mm 41.3 mm 47.6 mm NPTF UN Hex 1 Port 1 Hex 2 Port 2 A B Male Pipe – Female 37° Flare Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 D-7 www.parker.com/quickcouplings Swivels D Swivels In-Line PS Series Male Pipe – Female SAE Straight Thread Hex 1 Port 1 Hex 2 Port 2 A B Hex 1 Port 1 Hex 2 Port 2 A B Female Pipe – Female Pipe 3 Piece Design Wrench Flats Port 1 Dia Port 2 A B Part Number A B Hex 1 Hex 2 Port 1 Port 2 PS410110-4-4 2.71” 1.72” .75” 1.19” 1/4-18 7/16-20 68.8 mm 43.7 mm 19.0 mm 30.2 mm NPTF UNF PS610110-6-6 2.74” 1.72” .88” 1.31” 3/8-18 9/16-18 69.6 mm 43.7 mm 22.2 mm 33.3 mm NPTF UNF PS810110-8-8 3.03” 1.79” 1.12” 1.50” 1/2-14 3/4-16 76.8 mm 45.5 mm 28.6 mm 36.5 mm NPTF UNF PS1210110-12-12 3.33” 2.08” 1.38” 1.69” 3/4-14 1-1/16-12 84.7 mm 52.8 mm 35.0 mm 42.9 mm NPTF UN PS1610110-16-16 3.63” 2.20” 1.62” 1.88” 1-11 1/2 1-5/16-20 92.2 mm 55.9 mm 41.3 mm 47.6 mm NPTF UN Part Number A B Wrench Flats Dia. Port 1 Port 2 PS2410202-20-20 4.67″ 3.38″ 2.63″ 2.88″ 1 1/4-11 1/2 1 1/4-11 1/2 118.6 mm 85.9 mm 66.7 mm 73.0 mm NPTF NPTF PS2410202-24-24 4.67″ 3.38″ 2.63″ 2.88″ 1 1/2-11 1/2 1 1/2-11 1/2 118.6 mm 85.9 mm 66.7 mm 73.0 mm NPTF NPTF PS3210202-32-32 4.88″ 3.58″ 3.06″ 3.35″ 2-11 1/2 2-11 1/2 123.9 mm 90.8 mm 77.6 mm 85.1 mm NPTF NPTF Part Number A B Hex 1 Hex 2 Port 1 Port 2 PS410202-4-4 2.16” 1.60” .75” 1.19” 1/4-18 1/4-18 54.9 mm 40.6 mm 19.0 mm 30.2 mm NPTF NPTF PS610202-6-6 2.30” 1.64” .88” 1.31” 3/8-18 3/8-18 58.3 mm 41.7 mm 22.2 mm 33.3 mm NPTF NPTF PS810202-8-8 2.56” 1.79” 1.12” 1.50” 1/2-14 1/2-14 65.0 mm 45.5 mm 28.6 mm 36.5 mm NPTF NPTF PS1210202-12-12 2.88” 1.85” 1.38” 1.69” 3/4-14 3/4-14 73.1 mm 47.0 mm 35.0 mm 42.9 mm NPTF NPTF PS1610202-16-16 3.16” 2.11” 1.62” 1.88” 1-11 1/2 1-11 1/2 80.1 mm 53.5 mm 41.3 mm 47.6 mm NPTF NPTF Hex 1 Port 1 Hex 2 Port 2 A B Female Pipe – Male 37° Flare 3 Piece Design Wrench Flats Port 1 Dia Port 2 A B Part Number A B Wrench Flats Dia. Port 1 Port 2 PS2410203-20-20 5.06″ 3.78″ 2.63″ 2.88″ 1 1/4-11 1/2 1 5/8-12 128.6 mm 95.9 mm 66.7 mm 73.0 mm NPTF UN PS2410203-24-24 5.06″ 3.78″ 2.63″ 2.88″ 1 1/2-11 1/2 1 7/8-12 128.6 mm 95.9 mm 66.7 mm 73.0 mm NPTF UN PS3210203-32-32 5.58″ 4.28″ 3.06″ 3.35″ 2-11 1/2 2 1/2-12 141.7 mm 108.6 mm 77.6 mm 85.1 mm NPTF UN Part Number A B Hex 1 Hex 2 Port 1 Port 2 PS410203-4-4 2.43” 1.87” .75” 1.19” 1/4-18 7/16-20 61.7 mm 47.5 mm 19.0 mm 30.2 mm NPTF UNF PS610203-6-6 2.56” 1.90” .88” 1.31” 3/8-18 9/16-18 65.0 mm 48.3 mm 22.2 mm 33.3 mm NPTF UNF PS810203-8-8 2.86” 2.09” 1.12” 1.50” 1/2-14 3/4-16 72.7 mm 53.1 mm 28.6 mm 36.5 mm NPTF UNF PS1210203-12-12 3.33” 2.30” 1.38” 1.69” 3/4-14 1-1/16-12 84.5 mm 58.4 mm 35.0 mm 42.9 mm NPTF UN PS1610203-16-16 3.50” 2.45” 1.62” 1.88” 1-11 1/2 1-5/16-12 88.9 mm 62.2 mm 41.3 mm 47.6 mm NPTF UN Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 D-8 www.parker.com/quickcouplings Swivels D Swivels Part Number A B Hex 1 Hex 2 Port 1 Port 2 PS410302-4-4 2.59” 1.60” .75” 1.19” 7/16-20 1/4-18 65.8 mm 40.6 mm 19.0 mm 30.2 mm UNF NPTF PS610302-6-6 2.66” 1.64” .88” 1.31” 9/16-18 3/8-18 67.5 mm 41.7 mm 22.2 mm 33.3 mm UNF NPTF PS810302-8-8 2.89” 1.79” 1.12” 1.50” 3/4-16 1/2-14 73.5 mm 45.5 mm 28.6 mm 36.5 mm UNF NPTF PS1210302-12-12 3.21” 1.85” 1.38” 1.69” 1-1/16-12 3/4-14 81.5 mm 47.0 mm 35.0 mm 42.9 mm UN NPTF PS1610302-16-16 3.54” 2.11” 1.62” 1.88” 1-5/16-12 1-11 1/2 89.8 mm 53.5 mm 41.3 mm 47.6 mm UN NPTF Hex 1 Port 1 Hex 2 Port 2 A B Male 37° Flare – Female Pipe 3 Piece Design Wrench Flats Port 1 Dia Port 2 A B Part Number A B Wrench Flats Dia. Port 1 Port 2 PS2410302-20-20 4.91″ 3.38″ 2.63″ 2.88″ 1 5/8-12 1 1/4-11 1/2 124.8 mm 85.9 mm 66.7 mm 73.0 mm UN NPTF PS2410302-24-24 4.91″ 3.38″ 2.63″ 2.88″ 1 7/8-12 1 1/2-11 1/2 124.8 mm 85.9 mm 66.7 mm 73.0 mm UN NPTF PS3210302-32-32 5.50″ 3.58″ 3.06″ 3.35″ 2 1/2-12 2-11 1/2 139.8 mm 90.8 mm 77.6 mm 85.1 mm UN NPTF In-Line PS Series Hex 1 Port 1 Hex 2 Port 2 A B Female Pipe – Female 37° Flare Hex 1 Port 1 Hex 2 Port 2 A B Part Number A B Hex 1 Hex 2 Port 1 Port 2 PS410210-4-4 2.28” 1.72” .75” 1.19” 1/4-18 7/16-20 57.9 mm 43.7 mm 19.0 mm 30.2 mm NPTF UNF PS610210-6-6 2.38” 1.72” .88” 1.31” 3/8-18 9/16-18 60.4 mm 43.7 mm 22.2 mm 33.3 mm NPTF UNF PS810210-8-8 2.56” 1.79” 1.12” 1.50” 1/2-14 3/4-16 65.0 mm 45.5 mm 28.6 mm 36.5 mm NPTF UNF PS1210210-12-12 3.11” 2.08” 1.38” 1.69” 3/4-14 1-1/16-12 78.9 mm 52.8 mm 35.0 mm 42.9 mm NPTF UN PS1610210-16-16 3.25” 2.20” 1.62” 1.88” 1-11 1/2 1-5/16-20 82.6 mm 55.9 mm 41.3 mm 47.6 mm NPTF UN Female Pipe – Female SAE Straight Thread Part Number A B Hex 1 Hex 2 Port 1 Port 2 PS410206-4-4 2.29” 1.73” .75” 1.19” 1/4-18 7/16-20 58.2 mm 43.9 mm 19.0 mm 30.2 mm NPTF UNF PS610206-6-6 2.41” 1.75” .88” 1.31” 3/8-18 9/16-18 61.1 mm 44.5 mm 22.2 mm 33.3 mm NPTF UNF PS810206-8-8 2.58” 1.81” 1.12” 1.50” 1/2-14 3/4-16 65.6 mm 46.0 mm 28.6 mm 36.5 mm NPTF UNF PS1210206-12-12 3.05” 2.02” 1.38” 1.69” 3/4-14 1-1/16-12 77.4 mm 51.3 mm 35.0 mm 42.9 mm NPTF UN PS1610206-16-16 3.24” 2.19” 1.62” 1.88” 1-11 1/2 1-5/16-12 82.3 mm 55.6 mm 41.3 mm 47.6 mm NPTF UN Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 D-9 www.parker.com/quickcouplings Swivels D Swivels In-Line PS Series Hex 1 Port 1 Hex 2 Port 2 A B Male 37° Flare – Male 37° Flare Hex 1 Port 1 Hex 2 Port 2 A B Male 37° Flare – Female 37° Flare Part Number A B Hex 1 Hex 2 Port 1 Port 2 PS410306-4-4 2.72” 1.73” .75” 1.19” 7/16-20 7/16-20 69.1 mm 43.9 mm 19.0 mm 30.2 mm UNF UNF PS610306-6-6 2.77” 1.75” .88” 1.31” 9/16-18 9/16-18 70.3 mm 44.5 mm 22.2 mm 33.3 mm UNF UNF PS810306-8-8 2.91” 1.81” 1.12” 1.50” 3/4-16 3/4-16 74.0 mm 46.0 mm 28.6 mm 36.5 mm UNF UNF PS1210306-12-12 3.38” 2.02” 1.38” 1.69” 1-1/16-12 1-1/16-12 85.8 mm 51.3 mm 35.0 mm 42.9 mm UN UN PS1610306-16-16 3.62” 2.19” 1.62” 1.88” 1-5/16-12 1-5/16-12 92.0 mm 55.6 mm 41.3 mm 47.6 mm UN UN 3 Piece Design Part Number A B Wrench Flats Dia. Port 1 Port 2 PS2410303-20-20 5.31″ 3.78″ 2.63″ 2.88″ 1 5/8-12 1 5/8-12 134.8 mm 95.9 mm 66.7 mm 73.0 mm UN UN PS2410303-24-24 5.31″ 3.78″ 2.63″ 2.88″ 1 7/8-12 1 7/8-12 134.8 mm 95.9 mm 66.7 mm 73.0 mm UN UN PS3210303-32-32 6.20″ 4.28″ 3.06″ 3.35″ 2 1/2-12 2 1/2-12 157.5 mm 108.6 mm 77.6 mm 85.1 mm UN UN Wrench Flats Port 1 Dia Port 2 A B Part Number A B Hex 1 Hex 2 Port 1 Port 2 PS410303-4-4 2.86” 1.87” .75” 1.19” 7/16-20 7/16-20 72.6 mm 47.5 mm 19.0 mm 30.2 mm UNF UNF PS610303-6-6 2.92” 1.90” .88” 1.31” 9/16-18 9/16-18 74.1 mm 48.3 mm 22.2 mm 33.3 mm UNF UNF PS810303-8-8 3.19” 2.09” 1.12” 1.50” 3/4-16 3/4-16 81.1 mm 53.1 mm 28.6 mm 36.5 mm UNF UNF PS810303-10-10 3.39” 2.19” 1.12” 1.50” 7/8-14 7/8-14 86.2 mm 55.6 mm 28.6 mm 36.5 mm UNF UNF PS1210303-12-12 3.66” 2.30” 1.38” 1.69” 1-1/16-12 1-1/16-12 92.9 mm 58.4 mm 35.0 mm 42.9 mm UN UN PS1610303-16-16 3.88” 2.45” 1.62” 1.88” 1-5/16-12 1-5/16-12 98.6 mm 62.2 mm 41.3 mm 47.6 mm UN UN Hex 1 Port 1 Hex 2 Port 2 A B Male 37° Flare – Female SAE Straight Thread 3 Piece Design Wrench Flats Port 1 Dia Port 2 A B Part Number A B Hex 1 Hex 2 Port 1 Port 2 PS410310-4-4 2.71” 1.72” .75” 1.19” 7/16-20 7/16-20 68.8 mm 43.7 mm 19.0 mm 30.2 mm UNF UNF PS610310-6-6 2.74” 1.72” .88” 1.31” 9/16-18 9/16-18 69.6 mm 43.7 mm 22.2 mm 33.3 mm UNF UNF PS810310-8-8 2.89” 1.79” 1.12” 1.50” 3/4-16 3/4-16 73.5 mm 45.5 mm 28.6 mm 36.5 mm UNF UNF PS1210310-12-12 3.44” 2.08” 1.38” 1.69” 1-1/16-12 1-1/16-12 87.3 mm 52.8 mm 35.0 mm 42.9 mm UN UN PS1610310-16-16 3.63” 2.20” 1.62” 1.88” 1-5/16-12 1-5/16-12 92.2 mm 55.9 mm 41.3 mm 47.6 mm UN UN Part Number A B C D Dia. Wrench Flats Port 1 Port 2 PS2410310-20-20 6.16″ 4.63″ 3.43″ 1.27″ 2.63″ 3.36″ 1 5/8-12 1 5/8-12 150.2 mm 117.5 mm 87.0 mm 32.3 mm 66.7 mm 85.2 mm UN UN PS2410310-24-24 6.16″ 4.63″ 3.43″ 1.27″ 2.63″ 3.36″ 17/8-12 1 7/8-12 150.2 mm 117.5 mm 87.0 mm 32.3 mm 66.7 mm 85.2 mm UN UN PS3210310-32-32 7.38″ 5.45″ 3.93″ 1.52″ 3.06″ 4.19″ 2 1/2-12 2-1/2-12 187.4 mm 138.4 mm 99.7 mm 38.5 mm 77.6 mm 106.4 mm UN UN Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 D-10 www.parker.com/quickcouplings Swivels D Swivels Hex 1 Port 1 Hex 2 Port 2 A B Male SAE O-Ring Straight Thread – Male 37° Flare Hex 1 Port 1 Hex 2 Port 2 A B Male SAE O-Ring Straight Thread – Female 37° Flare Part Number A B Hex 1 Hex 2 Port 1 Port 2 PS410510-4-4 2.56” 1.72” .75” 1.19” 7/16-20 7/16-20 65.0 mm 43.7 mm 19.0 mm 30.2 mm UNF UNF PS610510-6-6 2.56” 1.72” .88” 1.31” 9/16-18 9/16-18 65.0 mm 43.7 mm 22.2 mm 33.3 mm UNF UNF PS810510-8-8 2.79” 1.79” 1.12” 1.50” 3/4-16 3/4-16 70.8 mm 45.5 mm 28.6 mm 36.5 mm UNF UNF PS1210510-12-12 3.25” 2.08” 1.38” 1.69” 1-1/16-12 1-1/16-12 82.6 mm 52.8 mm 35.0 mm 42.9 mm UN UN PS1610510-16-16 3.41” 2.20” 1.62” 1.88” 1-5/16-12 1-5/16-12 86.5 mm 55.9 mm 41.3 mm 47.6 mm UN UN Hex 1 Port 1 Hex 2 Port 2 A B Male SAE O-Ring Straight Thread – Female SAE Straight Thread Part Number A B Hex 1 Hex 2 Port 1 Port 2 PS410503-4-4 2.71” 1.87” .75” 1.19” 7/16-20 7/16-20 68.9 mm 47.5 mm 19.0 mm 30.2 mm UNF UNF PS610503-6-6 2.74” 1.90” .88” 1.31” 9/16-18 9/16-18 69.6 mm 48.3 mm 22.2 mm 33.3 mm UNF UNF PS810503-8-8 3.09” 2.09” 1.12” 1.50” 3/4-16 3/4-16 78.4 mm 53.1 mm 28.6 mm 36.5 mm UNF UNF PS810503-10-10 3.25” 2.19” 1.12” 1.50” 7/8-14 7/8-14 82.5 mm 55.6 mm 28.6 mm 36.5 mm UNF UNF PS1210503-12-12 3.47” 2.30” 1.38” 1.69” 1-1/16-12 1-1/16-12 88.2 mm 58.4 mm 35.0 mm 42.9 mm UN UN PS1610503-16-16 3.66” 2.45” 1.62” 1.88” 1-5/16-12 1-5/16-12 92.9 mm 62.2 mm 41.3 mm 47.6 mm UN UN Part Number A B Hex 1 Hex 2 Port 1 Port 2 PS410506-4-4 2.57” 1.73” .75” 1.19” 7/16-20 7/16-20 65.4 mm 43.9 mm 19.0 mm 30.2 mm UNF UNF PS610506-6-6 2.59” 1.75” .88” 1.31” 9/16-18 9/16-18 65.8 mm 44.5 mm 22.2 mm 33.3 mm UNF UNF PS810506-8-8 2.81” 1.81” 1.12” 1.50” 3/4-16 3/4-16 71.3 mm 46.0 mm 28.6 mm 36.5 mm UNF UNF PS1210506-12-12 3.19” 2.02” 1.38” 1.69” 1-1/16-12 1-1/16-12 81.1 mm 51.3 mm 35.0 mm 42.9 mm UN UN PS1610506-16-16 3.40” 2.19” 1.62” 1.88” 1-5/16-12 1-5/16-12 86.3 mm 55.6 mm 41.3 mm 47.6 mm UN UN In-Line PS Series Hex 1 Hex 2 A B Port 1 Port 2 Male SAE O-Ring Straight Thread – Female Pipe Part Number A B Hex 1 Hex 2 Port 1 Port 2 PS410502-4-4 2.44” 1.60” .75” 1.19” 7/16-20 1/4-18 62.1 mm 40.6 mm 19.0 mm 30.2 mm UNF NPTF PS610502-6-6 2.48” 1.64” .88” 1.31” 9/16-18 3/8-18 63.0 mm 41.7 mm 22.2 mm 33.3 mm UNF NPTF PS810502-8-8 2.79” 1.79” 1.12” 1.50” 3/4-16 1/2-14 70.8 mm 45.5 mm 28.6 mm 36.5 mm UNF NPTF PS1210502-12-12 3.02” 1.85” 1.38” 1.69” 1-1/16-12 3/4-14 76.7 mm 47.0 mm 35.0 mm 42.9 mm UN NPTF PS1610502-16-16 3.31” 2.11” 1.62” 1.88” 1-5/16-12 1-11 1/2 84.1 mm 53.5 mm 41.3 mm 47.6 mm UN NPTF Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 D-11 www.parker.com/quickcouplings Swivels D Swivels In-Line PS Series Part Number A B Hex 1 Hex 2 Port 1 Port 2 PS411002-4-4 2.16” 1.60” .75” 1.19” 7/16-20 1/4-18 55.0 mm 40.6 mm 19.0 mm 30.2 mm UNF NPTF PS611002-6-6 2.30” 1.64” .88” 1.31” 9/16-18 3/8-18 58.3 mm 41.7 mm 22.2 mm 33.3 mm UNF NPTF PS811002-8-8 2.56” 1.79” 1.12” 1.50” 3/4-16 1/2-14 65.0 mm 45.5 mm 28.6 mm 36.5 mm UNF NPTF PS1211002-12-12 2.88” 1.85” 1.38” 1.69” 1-1/16-12 3/4-14 73.1 mm 47.0 mm 35.0 mm 42.9 mm UN NPTF PS1611002-16-16 3.16” 2.11” 1.62” 1.88” 1-5/16-12 1-11 1/2 80.1 mm 53.5 mm 41.3 mm 47.6 mm UN NPTF Hex 1 Port 1 Hex 2 Port 2 A B Female SAE Straight Thread – Female Pipe Part Number A B Hex 1 Hex 2 Port 1 Port 2 PS411003-4-4 2.43” 1.87” .75” 1.19” 7/16-20 7/16-20 61.8 mm 47.5 mm 19.0 mm 30.2 mm UNF UNF PS611003-6-6 2.56” 1.90” .88” 1.31” 9/16-18 9/16-18 65.0 mm 48.3 mm 22.2 mm 33.3 mm UNF UNF PS811003-8-8 2.86” 2.09” 1.12” 1.50” 3/4-16 3/4-16 72.7 mm 53.1 mm 28.6 mm 36.5 mm UNF UNF PS1211003-12-12 3.33” 2.30” 1.38” 1.69” 1-1/16-12 1-1/16-12 84.5 mm 58.4 mm 35.0 mm 42.9 mm UN UN PS1611003-16-16 3.50” 2.45” 1.62” 1.88” 1-5/16-12 1-5/16-12 88.9 mm 62.2 mm 41.3 mm 47.6 mm UN UN Hex 1 Port 1 Hex 2 Port 2 A B Female SAE Straight Thread – Male 37° Flare Hex 1 Port 1 Hex 2 Port 2 A B Female SAE Straight Thread – Female 37° Flare Part Number A B Hex 1 Hex 2 Port 1 Port 2 PS411006-4-4 2.29” 1.73” .75” 1.19” 7/16-20 7/16-20 58.3 mm 43.9 mm 19.0 mm 30.2 mm UNF UNF PS611006-6-6 2.41” 1.75” .88” 1.31” 9/16-18 9/16-18 61.1 mm 44.5 mm 22.2 mm 33.3 mm UNF UNF PS811006-8-8 2.58” 1.81” 1.12” 1.50” 3/4-16 3/4-16 65.6 mm 46.0 mm 28.6 mm 36.5 mm UNF UNF PS1211006-12-12 3.05” 2.02” 1.38” 1.69” 1-1/16-12 1-1/16-12 77.4 mm 51.3 mm 35.0 mm 42.9 mm UN UN PS1611006-16-16 3.24” 2.19” 1.62” 1.88” 1-5/16-12 1-5/16-12 82.3 mm 55.6 mm 41.3 mm 47.6 mm UN UN Hex 1 Port 1 Hex 2 Port 2 A B Part Number A B Hex 1 Hex 2 Port 1 Port 2 PS411010-4-4 2.28” 1.72” .75” 1.19” 7/16-20 7/16-20 58.0 mm 43.7 mm 19.0 mm 30.2 mm UNF UNF PS611010-6-6 2.38” 1.72” .88” 1.31” 9/16-18 9/16-18 60.4 mm 43.7 mm 22.2 mm 33.3 mm UNF UNF PS811010-8-8 2.56” 1.79” 1.12” 1.50” 3/4-16 3/4-16 65.0 mm 45.5 mm 28.6 mm 36.5 mm UNF UNF PS1211010-12-12 3.11” 2.08” 1.38” 1.69” 1-1/16-12 1-1/16-12 78.9 mm 52.8 mm 35.0 mm 42.9 mm UN UN PS1611010-16-16 3.25” 2.20” 1.62” 1.88” 1-5/16-12 1-5/16-12 82.6 mm 55.9 mm 41.3 mm 47.6 mm UN UN Female SAE Straight Thread – Female SAE Straight Thread 3 Piece Design Part Number A B C D Wrench Flats Dia. Port 1 Port 2 PS2411010-20-20 5.91″ 4.63″ 3.43″ 1.27″ 2.63″ 3.36″ 1 5/8-12 1 5/8-12 150.2 mm 117.5 mm 87.0 mm 32.3 mm 66.7 mm 85.2 mm UN UN PS2411010-24-24 5.91″ 4.63″ 3.43″ 1.27″ 2.63″ 3.36″ 1 7/8-12 1 7/8-12 150.2 mm 117.5 mm 87.0 mm 32.3 mm 66.7 mm 85.2 mm UN UN PS3211010-32-32 6.83″ 5.45″ 3.93″ 1.52″ 3.06″ 4.19″ 2 1/2-12 2-1/2-12 173.6 mm 138.4 mm 99.7 mm 38.5 mm 77.6 mm 106.4 mm UN UN Wrench Flats Port 1 Dia Port 2 A B Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 D-12 www.parker.com/quickcouplings Swivels D Swivels Hex 1 Port 1 Port 2 A DIA B Male Pipe – Female Pipe Materials Of Construction Housing*: ……………………………………………………Carbon Steel Shaft*:………………………………………………………..Carbon Steel Plating*:……………………………………………….Chromium-6 Free Bearing*: ……………………………………………………………Chrome O-Rings*:………………………………………………………………Nitrile Back-Up Ring: ……………………………………………………….PTFE * See How-To-Order for optional material plating and seals. Hex 1 Port 1 Hex 2 A Port 2 B DIA D C Male Pipe – Male 37° Flare Hex 1 Port 1 Hex 2 Port 2 Housing O-Ring Back-Up Ring O-Ring Cap Screw Bearing O-Ring Shaft Part Number A B Dia. Hex 1 Port 1 Port 2 PS490102-4-4 2.85” 2.44” 1.20” .75” 1/4-18 1/4-18 72.3 mm 62.0 mm 30.5 mm 19.0 mm NPTF NPTF PS690102-6-6 3.05” 2.54” 1.29” .88” 3/8-18 3/8-18 77.4 mm 64.4 mm 32.8 mm 22.2 mm NPTF NPTF PS890102-8-8 3.43” 2.84” 1.49” 1.12” 1/2-14 1/2-14 87.0 mm 72.0 mm 37.8 mm 28.6 mm NPTF NPTF PS1290102-12-12 3.66” 3.00” 1.76” 1.38” 3/4-14 3/4-14 93.0 mm 76.1 mm 44.6 mm 35.0 mm NPTF NPTF PS1690102-16-16 4.41” 3.54” 2.16” 1.62” 1-11 1/2 1-11 1/2 112.0 mm 90.0 mm 54.9 mm 41.3 mm NPTF NPTF Part Number A B C D Dia Hex 1 Hex 2 Port 1 Port 2 PS490103-4-4 2.85” 2.44” 1.39” 1.99” 1.20” .75” .56” 1/4-18 7/16-20 72.3 mm 62.0 mm 35.2 mm 50.5 mm 30.5 mm 19.0 mm 14.3 mm NPTF UNF PS690103-6-6 3.05” 2.54” 1.44” 2.09” 1.29” .88” .69” 3/8-18 9/16-18 77.4 mm 64.4 mm 36.6 mm 53.0 mm 32.8 mm 22.2 mm 17.5 mm NPTF UNF PS890103-8-8 3.43” 2.84” 1.78” 2.64” 1.73” 1.12” .88” 1/2-14 3/4-16 87.0 mm 72.0 mm 45.1 mm 67.1 mm 44.0 mm 28.6 mm 22.2 mm NPTF UNF PS1290103-12-12 3.66” 3.00” 2.24” 3.86” 2.17” 1.38” 1.25” 3/4-14 1-1/16-12 93.0 mm 76.1 mm 56.9 mm 85.3 mm 55.2 mm 35.0 mm 31.8 mm NPTF UN PS1690103-16-16 4.41” 3.54” 2.42” 3.66” 2.48” 1.62” 1.50” 1-11 1/2 1-5/16-12 112.0 mm 90.0 mm 61.3 mm 92.9 mm 63.0 mm 41.3 mm 38.1 mm NPTF UN 90° PS Series Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 D-13 www.parker.com/quickcouplings Swivels D Swivels 90° PS Series Hex 1 Port 1 Hex 2 Port 2 A B DIA D C Male Pipe – Male SAE O-Ring Straight Thread Part Number A B C D Dia. Hex 1 Hex 2 Port 1 Port 2 PS490106-4-4 2.85” 2.44” 1.47” 2.07” 1.20” .75” .56” 1/4-18 7/16-20 72.3 mm 62.0 mm 37.3 mm 52.5 mm 30.5 mm 19.0 mm 14.3 mm NPTF UNF PS690106-6-6 3.05” 2.54” 1.57” 2.22” 1.29” .88” .69” 3/8-18 9/16-18 77.4 mm 64.4 mm 39.9 mm 56.3 mm 32.8 mm 22.2 mm 17.5 mm NPTF UNF PS890106-8-8 3.43” 2.84” 1.91” 2.77” 1.73” 1.12” .88” 1/2-14 3/4-16 87.0 mm 72.0 mm 48.4 mm 70.4 mm 44.0 mm 28.6 mm 22.2 mm NPTF UNF PS1290106-12-12 3.66” 3.00” 2.34” 3.43” 2.17” 1.38” 1.25” 3/4-14 1-1/16-12 93.0 mm 76.1 mm 59.4 mm 87.0 mm 55.2 mm 35.0 mm 31.8 mm NPTF UN PS1690106-16-16 4.41” 3.54” 2.54” 3.79” 2.48” 1.62” 1.50” 1-11 1/2 1-5/16-12 112.0 mm 90.0 mm 64.6 mm 96.2 mm 63.0 mm 41.3 mm 38.1 mm NPTF UN Hex 1 Port 1 Hex 2 A Port 2 B DIA D C Part Number A B C D Dia. Hex 1 Hex 2 Port 1 Port 2 PS490107-4-4 2.85” 2.44” 1.48” 2.08” 1.20” .75” .69” 1/4-18 1/4-18 72.3 mm 62.0 mm 37.5 mm 52.8 mm 30.5 mm 19.0 mm 17.4 mm NPTF NPSM PS690107-6-6 3.05” 2.54” 1.51” 2.16” 1.29” .88” .88” 3/8-18 3/8-18 77.4 mm 64.4 mm 38.4 mm 54.8 mm 32.8 mm 22.2 mm 22.2 mm NPTF NPSM PS890107-8-8 3.43” 2.84” 1.86” 2.72” 1.73” 1.12” 1.00” 1/2-14 1/2-14 87.0 mm 72.0 mm 47.2 mm 69.2 mm 44.0 mm 28.6 mm 25.4 mm NPTF NPSM PS1290107-12-12 3.66” 3.00” 2.24” 3.33” 2.17” 1.38” 1.25” 3/4-14 3/4-14 93.0 mm 76.1 mm 56.9 mm 84.5 mm 55.2 mm 35.0 mm 31.8 mm NPTF NPSM PS1690107-16-16 4.41” 3.54” 2.48” 3.73” 2.48” 1.62” 1.50” 1-11 1/2 1-11 1/2 112.0 mm 90.0 mm 63.1 mm 94.6 mm 63.0 mm 41.3 mm 38.1 mm NPTF NPSM Hex 1 Port 1 Port 2 A DIA B Hex 1 Port 1 Hex 2 Port 2 A B DIA D C Part Number A B Dia. Hex 1 Port 1 Port 2 PS490110-4-4 2.85” 2.44” 1.20” .75” 1/4-18 7/16-20 72.3 mm 62.0 mm 30.5 mm 19.0 mm NPTF UNF PS690110-6-6 3.05” 2.54” 1.29” .88” 3/8-18 9/16-18 77.4 mm 64.4 mm 32.8 mm 22.2 mm NPTF UNF PS890110-8-8 3.43” 2.84” 1.73” 1.12” 1/2-14 3/4-16 87.0 mm 72.0 mm 44.0 mm 28.6 mm NPTF UNF PS1290110-12-12 3.66” 3.00” 2.17” 1.38” 3/4-14 1-1/16-12 93.0 mm 76.1 mm 55.2 mm 35.0 mm NPTF UN PS1690110-16-16 4.41” 3.54” 2.48” 1.62” 1-11 1/2 1-5/16-12 112.0 mm 90.0 mm 63.0 mm 41.3 mm NPTF UN Male Pipe – Female SAE Straight Thread Male Pipe – Female 37° Flare Part Number A B C D Dia. Hex 1 Hex 2 Port 1 Port 2 PS490105-4-4 2.85” 2.44” 1.38” 1.98” 1.20” .75” .56” 1/4-18 7/16-20 72.3 mm 62.0 mm 35.0 mm 50.2 mm 30.5 mm 19.0 mm 14.3 mm NPTF UNF PS690105-6-6 3.05” 2.54” 1.55” 2.20” 1.29” .88” .69” 3/8-18 9/16-18 77.4 mm 64.4 mm 39.4 mm 55.8 mm 32.8 mm 22.2 mm 17.5 mm NPTF UNF PS890105-8-8 3.43” 2.84” 1.86” 2.72” 1.73” 1.12” .88” 1/2-14 3/4-16 87.0 mm 72.0 mm 47.2 mm 69.2 mm 44.0 mm 28.6 mm 22.2 mm NPTF UNF PS1290105-12-12 3.66” 3.00” 2.40” 3.49” 2.17” 1.38” 1.25” 3/4-14 1-1/16-12 93.0 mm 76.1 mm 61.0 mm 88.5 mm 55.2 mm 35.0 mm 31.8 mm NPTF UN PS1690105-16-16 4.41” 3.54” 2.50” 3.74” 2.48” 1.62” 1.50” 1-11 1/2 1-5/16-12 112.0 mm 90.0 mm 63.4 mm 94.9 mm 63.0 mm 41.3 mm 38.1 mm NPTF UN Male Pipe – Female NPSM Pipe Swivel Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 D-14 www.parker.com/quickcouplings Swivels D Swivels Part Number A B C D Dia. Hex 1 Hex 2 Port 1 Port 2 PS4901JM-4-4 2.85” 2.44” 1.29” 1.89” 1.20” .75” .56” 1/4-18 9/16-18 72.3 mm 62.0 mm 32.5 mm 47.9 mm 30.5 mm 19.0 mm 14.3 mm NPTF UNF PS6901JM-6-6 3.05” 2.54” 1.40” 2.05” 1.29” .88” .69” 3/8-18 11/16-16 77.4 mm 64.4 mm 35.6 mm 52.0 mm 32.8 mm 22.2 mm 17.5 mm NPTF UN PS8901JM-8-8 3.43” 2.84” 1.74” 2.60” 1.73” 1.12” .88” 1/2-14 13/16-16 87.0 mm 72.0 mm 44.1 mm 66.1 mm 44.0 mm 28.6 mm 22.2 mm NPTF UN PS12901JM-12-12 3.66” 3.00” 2.18” 3.27” 2.17” 1.38” 1.25” 3/4-14 1-3/16-12 93.0 mm 76.1 mm 55.4 mm 83.0 mm 55.2 mm 35.0 mm 31.8 mm NPTF UN PS16901JM-16-16 4.41” 3.54” 2.34” 3.59” 2.48” 1.62” 1.50” 1-11 1/2 1-7/16-12 112.0 mm 90.0 mm 59.6 mm 91.1 mm 63.0 mm 41.3 mm 38.1 mm NPTF UN Hex 1 Port 1 Hex 2 Port 2 A B DIA D C Male Pipe – O-Ring Face Seal Part Number A B Dia Hex 1 Port 1 Port 2 PS490202-4-4 2.42” 2.01” 1.20” .75” 1/4-18 1/4-18 61.4 mm 51.2 mm 30.5 mm 19.0 mm NPTF NPTF PS690202-6-6 2.68” 2.17” 1.29” .88” 3/8-18 3/8-18 68.2 mm 55.2 mm 32.8 mm 22.2 mm NPTF NPTF PS890202-8-8 2.96” 2.37” 1.49” 1.12” 1/2-14 1/2-14 75.3 mm 60.3 mm 37.8 mm 28.6 mm NPTF NPTF PS1290202-12-12 3.43” 2.77” 1.76” 1.38” 3/4-14 3/4-14 87.2 mm 70.4 mm 44.6 mm 35.0 mm NPTF NPTF PS1690202-16-16 4.03” 3.16” 2.16” 1.62” 1-11 1/2 1-11 1/2 102.3 mm 80.3 mm 54.9 mm 41.3 mm NPTF NPTF Female Pipe – Female Pipe Female Pipe – Male 37° Flare Hex 1 Port 1 Hex 2 Port 2 A DIA B D C Part Number A B C D Dia Hex 1 Hex 2 Port 1 Port 2 PS490203-4-4 2.42” 2.01” 1.39” 1.99” 1.20” .75” .56” 1/4-18 7/16-20 61.4 mm 51.2 mm 35.2 mm 50.5 mm 30.5 mm 19.0 mm 14.3 mm NPTF UNF PS690203-6-6 2.68” 2.17” 1.44” 2.09” 1.29” .88” .69” 3/8-18 9/16-18 68.2 mm 55.2 mm 36.6 mm 53.0 mm 32.8 mm 22.2 mm 17.5 mm NPTF UNF PS890203-8-8 2.96” 2.37” 1.78” 2.64” 1.73” 1.12” .88” 1/2-14 3/4-16 75.3 mm 60.3 mm 45.1 mm 67.1 mm 44.0 mm 28.6 mm 22.2 mm NPTF UNF PS1290203-12-12 3.43” 2.77” 2.24” 3.86” 2.17” 1.38” 1.25” 3/4-14 1-1/16-12 87.2 mm 70.4 mm 56.9 mm 85.3 mm 55.2 mm 35.0 mm 31.8 mm NPTF UN PS1690203-16-16 4.03” 3.16” 2.42” 3.66” 2.48” 1.62” 1.50” 1-11 1/2 1-5/16-12 102.3 mm 80.3 mm 61.3 mm 92.9 mm 63.0 mm 41.3 mm 38.1 mm NPTF UN Part Number A B C D Wrench Flats Dia. Port 1 Port 2 PS2490202-20-20 5.91″ 4.63″ 3.43″ 1.27″ 2.63″ 3.36″ 1 1/4-11 1/2 1 1/4-11 1/2 150.2 mm 117.5 mm 87.0 mm 32.3 mm 66.7 mm 85.2 mm NPTF NPTF PS2490202-24-24 5.91″ 4.63″ 3.43″ 1.27″ 2.63″ 3.36″ 1 1/2-11 1/2 1 1/2-11 1/2 150.2 mm 117.5 mm 87.0 mm 32.3 mm 66.7 mm 85.2 mm NPTF NPTF PS3290202-32-32 6.75″ 5.45″ 3.93″ 1.52″ 3.06″ 4.19″ 2 11-1/2 2 11-1/2 171.5 mm 138.4 mm 99.7 mm 38.5 mm 77.6 mm 106.4 mm NPTF NPTF Part Number A B C D E Hex Wrench Flats Dia. Port 1 Port 2 PS2490203-20-20 5.91″ 4.63″ 3.43″ 2.85″ 4.53″ 1.88″ 2.63″ 3.36″ 1 1/4-11 1/2 1 5/8-12 150.2 mm 117.5 mm 87.0 mm 72.4 mm 115.0 mm 47.6 mm 66.7 mm 85.2 mm NPTF UN PS2490203-24-24 5.94″ 4.65″ 3.43″ 3.05″ 4.73″ 2.13″ 2.63″ 3.36″ 1 1/2-11 1/2 17/8-12 150.9 mm 118.2 mm 87.0 mm 77.6 mm 120.2 mm 54.0 mm 66.7 mm 85.2 mm NPTF UN PS3290203-32-32 6.82″ 5.51″ 3.93″ 3.70″ 5.80″ 2.75″ 3.06″ 4.19″ 2 11-1/2 2 1/2-12 173.1 mm 140.0 mm 99.7 mm 94.0 mm 147.2 mm 69.8 mm 77.6 mm 106.4 mm NPTF UN 3 Piece Design Wrench Flats Port 1 Dia Port 2 A B C D 3 Piece Design Wrench Flats Port 1 Dia Port 2 A B C D E Hex Hex 1 Port 1 Port 2 A B DIA 90° PS Series Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 D-15 www.parker.com/quickcouplings Swivels D Swivels 90° PS Series Part Number A B C D Dia. Hex 1 Hex 2 Port 1 Port 2 PS490205-4-4 2.42” 2.01” 1.38” 1.98” 1.20” .75” .56” 1/4-18 7/16-20 61.4 mm 51.2 mm 35.0 mm 50.2 mm 30.5 mm 19.0 mm 14.3 mm NPTF UNF PS690205-6-6 2.68” 2.17” 1.55” 2.20” 1.29” .88” .69” 3/8-18 9/16-18 68.2 mm 55.2 mm 39.4 mm 55.8 mm 32.8 mm 22.2 mm 17.5 mm NPTF UNF PS890205-8-8 2.96” 2.37” 1.86” 2.72” 1.73” 1.12” .88” 1/2-14 3/4-16 75.3 mm 60.3 mm 47.2 mm 69.2 mm 44.0 mm 28.6 mm 22.2 mm NPTF UNF PS1290205-12-12 3.43” 2.77” 2.40” 3.49” 2.17” 1.38” 1.25” 3/4-14 1-1/16-12 87.2 mm 70.4 mm 61.0 mm 88.5 mm 55.2 mm 35.0 mm 31.8 mm NPTF UN PS1690205-16-16 4.03” 3.16” 2.50” 3.74” 2.48” 1.62” 1.50” 1-11 1/2 1-5/16-12 102.3 mm 80.3 mm 63.4 mm 94.9 mm 63.0 mm 41.3 mm 38.1 mm NPTF UN Part Number A B C D Dia. Hex 1 Hex 2 Port 1 Port 2 PS490206-4-4 2.42” 2.01” 1.47” 2.07” 1.20” .75″ .56” 1/4-18 7/16-20 61.4 mm 51.2 mm 37.3 mm 52.5 mm 30.5 mm 19.0 mm 14.3 mm NPTF UNF PS690206-6-6 2.68” 2.17” 1.57” 2.22” 1.29” .88” .69” 3/8-18 9/16-18 68.2 mm 55.2 mm 39.9 mm 56.3 mm 32.8 mm 22.2 mm 17.5 mm NPTF UNF PS890206-8-8 2.96” 2.37” 1.91” 2.77” 1.73” 1.12” .88” 1/2-14 3/4-16 75.3 mm 60.3 mm 48.4 mm 70.4 mm 44.0 mm 28.6 mm 22.2 mm NPTF UNF PS1290206-12-12 3.43” 2.77” 2.34” 3.43” 2.17” 1.38” 1.25” 3/4-14 1-1/16-12 87.2 mm 70.4 mm 59.4 mm 87.0 mm 55.2 mm 35.0 mm 31.8 mm NPTF UN PS1690206-16-16 4.03” 3.16” 2.54” 3.79” 2.48” 1.62” 1.50” 1-11 1/2 1-5/16-12 102.3 mm 80.3 mm 64.6 mm 96.2 mm 63.0 mm 41.3 mm 38.1 mm NPTF UN Hex 1 Port 1 Hex 2 A Port 2 DIA B D C Hex 1 Port 1 Hex 2 Port 2 A DIA B D C Female Pipe – Female 37° Flare Female Pipe – Male SAE O-Ring Straight Thread Hex 1 Port 1 Hex 2 Port 2 A DIA B D C Part Number A B C D Dia. Hex 1 Hex 2 Port 1 Port 2 PS490207-4-4 2.42” 2.01” 1.48” 2.08” 1.20” .75” .69” 1/4-18 1/4-18 61.4 mm 51.2 mm 37.5 mm 52.8 mm 30.5 mm 19.0 mm 17.4 mm NPTF NPSM PS690207-6-6 2.68” 2.17” 1.51” 2.16” 1.29” .88” .88” 3/8-18 3/8-18 68.2 mm 55.2 mm 38.4 mm 54.8 mm 32.8 mm 22.2 mm 22.2 mm NPTF NPSM PS890207-8-8 2.96” 2.37” 1.86” 2.72” 1.73” 1.12” 1.00” 1/2-14 1/2-14 75.3 mm 60.3 mm 47.2 mm 69.2 mm 44.0 mm 28.6 mm 25.4 mm NPTF NPSM PS1290207-12-12 3.43” 2.77” 2.24” 3.33” 2.17” 1.38” 1.25” 3/4-14 3/4-14 87.2 mm 70.4 mm 56.9 mm 84.5 mm 55.2 mm 35.0 mm 31.8 mm NPTF NPSM PS1690207-16-16 4.03” 3.16” 2.48” 3.73” 2.48” 1.62” 1.50” 1-11 1/2 1-11 1/2 102.3 mm 80.3 mm 63.1 mm 94.6 mm 63.0 mm 41.3 mm 38.1 mm NPTF NPSM Female Pipe – Female NPSM Pipe Swivel Hex 1 Port 1 Port 2 A DIA B Female Pipe – Female SAE Straight Thread 3 Piece Design Part Number A B C D Wrench Flats Dia. Port 1 Port 2 PS2490210-20-20 5.91″ 4.63″ 3.43″ 1.27″ 2.63″ 3.36″ 1 1/4-11 1/2 1 5/8-12 150.2 mm 117.5 mm 87.0 mm 32.3 mm 66.7 mm 85.2 mm NPTF UN PS2490210-24-24 5.91″ 4.63″ 3.43″ 1.27″ 2.63″ 3.36″ 1 1/4-11 1/2 1 5/8-12 150.2 mm 117.5 mm 87.0 mm 32.3 mm 66.7 mm 85.2 mm NPTF UN PS3290210-32-32 6.75″ 5.45″ 3.93″ 1.52″ 3.06″ 4.19″ 2 11-1/2 2-1/2-12 171.5 mm 138.4 mm 99.7 mm 38.5 mm 77.6 mm 106.4 mm NPTF UN Wrench Flats Port 1 Dia Port 2 A B C D Part Number A B Dia. Hex 1 Port 1 Port 2 PS490210-4-4 2.42” 2.01” 1.20” .75” 1/4-18 7/16-20 61.4 mm 51.2 mm 30.5 mm 19.0 mm NPTF UNF PS690210-6-6 2.68” 2.17” 1.29” .88” 3/8-18 9/16-18 68.2 mm 55.2 mm 32.8 mm 22.2 mm NPTF UNF PS890210-8-8 2.96” 2.37” 1.73” 1.12” 1/2-14 3/4-16 75.3 mm 60.3 mm 44.0 mm 28.6 mm NPTF UNF PS1290210-12-12 3.43” 2.77” 2.17” 1.38” 3/4-14 1-1/16-12 87.2 mm 70.4 mm 55.2 mm 35.0 mm NPTF UN PS1690210-16-16 4.03” 3.16” 2.48” 1.62” 1-11 1/2 1-5/16-12 102.3 mm 80.3 mm 63.0 mm 41.3 mm NPTF UN Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 D-16 www.parker.com/quickcouplings Swivels D Swivels Hex 1 Port 1 Port 2 A DIA B Part Number A B Dia. Hex 1 Port 1 Port 2 PS490302-4-4 2.85” 2.44” 1.20” .75” 7/16-20 1/4-18 72.3 mm 62.0 mm 30.5 mm 19.0 mm UNF NPTF PS690302-6-6 3.05” 2.54” 1.29” .88” 9/16-18 3/8-18 77.4 mm 64.4 mm 32.8 mm 22.2 mm UNF NPTF PS890302-8-8 3.29” 2.70” 1.49” 1.12” 3/4-16 1/2-14 83.7 mm 68.7 mm 37.8 mm 28.6 mm UNF NPTF PS1290302-12-12 3.76” 3.10” 1.76” 1.38” 1-1/16-12 3/4-14 95.6 mm 78.8 mm 44.6 mm 35.0 mm UN NPTF PS1690302-16-16 4.41” 3.54” 2.16” 1.62” 1-5/16-12 1-11 1/2 112.0 mm 90.0 mm 54.9 mm 41.3 mm UN NPTF Male 37° Flare – Female Pipe 3 Piece Design Part Number A B C D Wrench Flats Dia. Port 1 Port 2 PS2490302-20-20 6.16″ 4.63″ 3.43″ 1.27″ 2.63″ 3.36″ 1 5/8-12 1 1/4-11 1/2 150.2 mm 117.5 mm 87.0 mm 32.3 mm 66.7 mm 85.2 mm UN NPTF PS2490302-24-24 6.16″ 4.63″ 3.43″ 1.27″ 2.63″ 3.36″ 1 7/8-12 1 1/2-11 1/2 150.2 mm 117.5 mm 87.0 mm 32.3 mm 66.7 mm 85.2 mm UN NPTF PS3290302-32-32 7.38″ 5.45″ 3.93″ 1.52″ 3.06″ 4.19″ 2 1/2-12 2-11-1/2 187.4 mm 138.4 mm 99.7 mm 38.5 mm 77.6 mm 106.4 mm UN NPTF Hex 1 Port 1 Hex 2 Port 2 A B DIA D C Male 37° Flare – Male 37° Flare 3 Piece Design Wrench Flats Port 1 Dia Port 2 A B C D Part Number A B C D E Hex Wrench Flats Dia. Port 1 Port 2 PS2490303-20-20 6.16″ 4.63″ 3.43″ 2.85″ 4.53″ 1.88″ 2.63″ 3.36″ 1 5/8-12 1 5/8-12 156.4 mm 117.5 mm 87.0 mm 72.4 mm 115.0 mm 47.6 mm 66.7 mm 85.2 mm UN UN PS2490303-24-24 5.81″ 4.65″ 3.43″ 3.05″ 4.73″ 2.13″ 2.63″ 3.36″ 1 7/8-12 17/8-12 157.1 mm 118.2 mm 87.0 mm 77.6 mm 120.2 mm 54.0 mm 66.7 mm 85.2 mm UN UN PS3290303-32-32 7.44″ 5.51″ 3.93″ 3.70″ 5.80″ 2.75″ 3.06″ 4.19″ 2 1/2-12 2 1/2-12 189.0 mm 140.0 mm 99.7 mm 94.0 mm 147.2 mm 69.8 mm 77.6 mm 106.4 mm UN UN Wrench Flats Port 1 Dia Port 2 A B C D E Hex Part Number A B C D Dia. Hex 1 Hex 2 Port 1 Port 2 PS490303-4-4 2.85” 2.44” 1.39” 1.99” 1.20” .75” .56” 7/16-20 7/16-20 72.3 mm 62.0 mm 35.2 mm 50.5 mm 30.5 mm 19.0 mm 14.3 mm UNF UNF PS690303-6-6 3.05” 2.54” 1.44” 2.09” 1.29” .88” .69” 9/16-18 9/16-18 77.4 mm 64.4 mm 36.6 mm 53.0 mm 32.8 mm 22.2 mm 17.5 mm UNF UNF PS890303-8-8 3.29” 2.70” 1.78” 2.64” 1.73” 1.12” .88” 3/4-16 3/4-16 83.7 mm 68.7 mm 45.1 mm 67.1 mm 44.0 mm 28.6 mm 22.2 mm UNF UNF PS890303-10-10 3.39” 2.80” 1.90” 2.77” 1.73” 1.12” .88” 7/8-14 7/8-14 86.2 mm 71.2 mm 48.4 mm 70.4 mm 44.0 mm 28.6 mm 22.2 mm UNF UNF PS1290303-12-12 3.76” 3.10” 2.24” 3.86” 2.17” 1.38” 1.25” 1-1/16-12 1-1/16-12 95.6 mm 78.8 mm 56.9 mm 85.3 mm 55.2 mm 35.0 mm 31.8 mm UN UN PS1690303-16-16 4.41” 3.54” 2.42” 3.66” 2.48” 1.62” 1.50” 1-5/16-12 1-5/16-12 112.0 mm 90.0 mm 61.3 mm 92.9 mm 63.0 mm 41.3 mm 38.1 mm UN UN 90° PS Series Part Number A B C D Dia. Hex 1 Hex 2 Port 1 Port 2 PS490305-4-4 2.85” 2.44” 1.38” 1.98” 1.20” .75” .56” 7/16-20 7/16-20 72.3 mm 62.0 mm 35.0 mm 50.2 mm 30.5 mm 19.0 mm 14.3 mm UNF UNF PS690305-6-6 3.05” 2.54” 1.55” 2.20” 1.29” .88” .69” 9/16-18 9/16-18 77.4 mm 64.4 mm 39.4 mm 55.8 mm 32.8 mm 22.2 mm 17.5 mm UNF UNF PS890305-8-8 3.29” 2.70” 1.86” 2.72” 1.73” 1.12” .88” 3/4-16 3/4-16 83.7 mm 68.7 mm 47.2 mm 69.2 mm 44.0 mm 28.6 mm 22.2 mm UNF UNF PS1290305-12-12 3.76” 3.10” 2.40” 3.49” 2.17” 1.38” 1.25” 1-1/16-12 1-1/16-12 95.6 mm 78.8 mm 61.0 mm 88.5 mm 55.2 mm 35.0 mm 31.8 mm UN UN PS1690305-16-16 4.41” 3.54” 2.50” 3.74” 2.48” 1.62” 1.50” 1-5/16-12 1-5/16-12 112.0 mm 90.0 mm 63.4 mm 94.9 mm 63.0 mm 41.3 mm 38.1 mm UN UN Male 37° Flare – Male SAE O-Ring Straight Thread Hex 1 Port 1 Hex 2 Port 2 A B DIA D C Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 D-17 www.parker.com/quickcouplings Swivels D Swivels 90° PS Series Hex 1 Port 1 Port 2 A DIA B Male SAE O-Ring Straight Thread – Female Pipe Part Number A B Dia. Hex 1 Port 1 Port 2 PS490502-4-4 2.70” 2.29” 1.20” .75” 7/16-20 1/4-18 68.6 mm 58.3 mm 30.5 mm 19.0 mm UNF NPTF PS690502-6-6 2.87” 2.36” 1.29” .88” 9/16-18 3/8-18 72.8 mm 59.8 mm 32.8 mm 22.2 mm UNF NPTF PS890502-8-8 3.19” 2.60” 1.49” 1.12” 3/4-16 1/2-14 80.9 mm 65.9 mm 37.8 mm 28.6 mm UNF NPTF PS1290502-12-12 3.58” 2.92” 1.76” 1.38” 1-1/16-12 3/4-14 90.9 mm 74.0 mm 44.6 mm 35.0 mm UN NPTF PS1690502-16-16 4.18” 3.32” 2.16” 1.62” 1-5/16-12 1-11 1/2 106.3 mm 84.3 mm 54.9 mm 41.3 mm UN NPTF Hex 1 Port 1 Hex 2 Port 2 A B DIA D C Part Number A B C D Dia. Hex 1 Hex 2 Port 1 Port 2 PS490306-4-4 2.85” 2.44” 1.47” 2.07” 1.20” .75” .56” 7/16-20 7/16-20 72.3 mm 62.0 mm 37.3 mm 52.5 mm 30.5 mm 19.0 mm 14.3 mm UNF UNF PS690306-6-6 3.05” 2.54” 1.57” 2.22” 1.29” .88” .69” 9/16-18 9/16-18 77.4 mm 64.4 mm 39.9 mm 56.3 mm 32.8 mm 22.2 mm 17.5 mm UNF UNF PS890306-8-8 3.29” 2.70” 1.91” 2.77” 1.73” 1.12” .88” 3/4-16 3/4-16 83.7 mm 68.7 mm 48.4 mm 70.4 mm 44.0 mm 28.6 mm 22.2 mm UNF UNF PS1290306-12-12 3.76” 3.10” 2.34” 3.43” 2.17” 1.38” 1.25” 1-1/16-12 1-1/16-12 95.6 mm 78.8 mm 59.4 mm 87.0 mm 55.2 mm 35.0 mm 31.8 mm UN UN PS1690306-16-16 4.41” 3.54” 2.54” 3.79” 2.48” 1.62” 1.50” 1-5/16-12 1-5/16-12 112.0 mm 90.0 mm 64.6 mm 96.2 mm 63.0 mm 41.3 mm 38.1 mm UN UN Male 37° Flare – Female 37° Flare Part Number A B C D Dia. Hex 1 Hex 2 Port 1 Port 2 PS490307-4-4 2.85” 2.44” 1.48” 2.08” 1.20” .75” .69” 7/16-20 1/4-18 72.3 mm 62.0 mm 37.5 mm 52.8 mm 30.5 mm 19.0 mm 17.4 mm UNF NPSM PS690307-6-6 3.05” 2.54” 1.51” 2.16” 1.29” .88” .88” 9/16-18 3/8-18 77.4 mm 64.4 mm 38.4 mm 54.8 mm 32.8 mm 22.2 mm 22.2 mm UNF NPSM PS890307-8-8 3.29” 2.70” 1.86” 2.72” 1.73” 1.12” 1.00” 3/4-16 1/2-14 83.7 mm 68.7 mm 47.2 mm 69.2 mm 44.0 mm 28.6 mm 25.4 mm UNF NPSM PS1290307-12-12 3.76” 3.10” 2.24” 3.33” 2.17” 1.38” 1.25” 1-1/16-12 3/4-14 95.6 mm 78.8 mm 56.9 mm 84.5 mm 55.2 mm 35.0 mm 31.8 mm UN NPSM PS1690307-16-16 4.41” 3.54” 2.48” 3.73” 2.48” 1.62” 1.50” 1-5/16-12 1-11 1/2 112.0 mm 90.0 mm 63.1 mm 94.6 mm 63.0 mm 41.3 mm 38.1 mm UN NPSM Hex 1 Port 1 Hex 2 Port 2 A B DIA D C Male 37° Flare – Female NPSM Pipe Swivel Male 37° Flare – Female SAE Straight Thread Hex 1 Port 1 Port 2 A DIA B Part Number A B Dia. Hex 1 Port 1 Port 2 PS490310-4-4 2.85” 2.44” 1.20” .75” 7/16-20 7/16-20 72.3 mm 62.0 mm 30.5 mm 19.0 mm UNF UNF PS690310-6-6 3.05” 2.54” 1.29” .88” 9/16-18 9/16-18 77.4 mm 64.4 mm 32.8 mm 22.2 mm UNF UNF PS890310-8-8 3.29” 2.70” 1.73” 1.12” 3/4-16 3/4-16 83.7 mm 68.7 mm 44.0 mm 28.6 mm UNF UNF PS1290310-12-12 3.76” 3.10” 2.17” 1.38” 1-1/16-12 1-1/16-12 95.6 mm 78.8 mm 55.2 mm 35.0 mm UN UN PS1690310-16-16 4.41” 3.54” 2.48” 1.62” 1-1/16-12 1-1/16-12 112.0 mm 90.0 mm 63.0 mm 41.3 mm UN UN Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 D-18 www.parker.com/quickcouplings Swivels D Swivels Hex 1 Port 1 Hex 2 Port 2 A B DIA D C Male SAE O-Ring Straight Thread – Male SAE O-Ring Straight Thread Male SAE O-Ring Straight Thread – Male 37° Flare Hex 1 Port 1 Hex 2 Port 2 A B DIA D C Part Number A B C D Dia. Hex 1 Hex 2 Port 1 Port 2 PS490505-4-4 2.70” 2.29” 1.38” 1.98” 1.20” .75” .56” 7/16-20 7/16-20 68.6 mm 58.3 mm 35.0 mm 50.2 mm 30.5 mm 19.0 mm 14.3 mm UNF UNF PS690505-6-6 2.87” 2.36” 1.55” 2.20” 1.29” .88” .69” 9/16-18 9/16-18 72.8 mm 59.8 mm 39.4 mm 55.8 mm 32.8 mm 22.2 mm 17.5 mm UNF UNF PS890505-8-8 3.19” 2.60” 1.86” 2.72” 1.73” 1.12” .88” 3/4-16 3/4-16 80.9 mm 65.9 mm 47.2 mm 69.2 mm 44.0 mm 28.6 mm 22.2 mm UNF UNF PS1290505-12-12 3.58” 2.92” 2.40” 3.49” 2.17” 1.38” 1.25” 1-1/16-12 1-1/16-12 90.9 mm 74.0 mm 61.0 mm 88.5 mm 55.2 mm 35.0 mm 31.8 mm UN UN PS1690505-16-16 4.18” 3.32” 2.50” 3.74” 2.48” 1.62” 1.50” 1-5/16-12 1-5/16-12 106.3 mm 84.3 mm 63.4 mm 94.9 mm 63.0 mm 41.3 mm 38.1 mm UN UN Part Number A B C D Dia. Hex 1 Hex 2 Port 1 Port 2 PS490503-4-4 2.70” 2.29” 1.39” 1.99” 1.20” .75” .56” 7/16-20 7/16-20 68.6 mm 58.3 mm 35.2 mm 50.5 mm 30.5 mm 19.0 mm 14.3 mm UNF UNF PS690503-6-6 2.87” 2.36” 1.44” 2.09” 1.29” .88” .69” 9/16-18 9/16-18 72.8 mm 59.8 mm 36.6 mm 53.0 mm 32.8 mm 22.2 mm 17.5 mm UNF UNF PS890503-8-8 3.19” 2.60” 1.78” 2.64” 1.73” 1.12” .88” 3/4-16 3/4-16 80.9 mm 65.9 mm 45.1 mm 67.1 mm 44.0 mm 28.6 mm 22.2 mm UNF UNF PS890503-10-10 3.25” 2.66” 1.90” 2.77” 1.73” 1.12” .88” 7/8-14 7/8-14 82.5 mm 67.5 mm 48.4 mm 70.4 mm 44.0 mm 28.6 mm 22.2 mm UNF UNF PS1290503-12-12 3.58” 2.92” 2.24” 3.86” 2.17” 1.38” 1.25” 1-1/16-12 1-1/16-12 90.9 mm 74.0 mm 56.9 mm 85.3 mm 55.2 mm 35.0 mm 31.8 mm UN UN PS1690503-16-16 4.18” 3.32” 2.42” 3.66” 2.48” 1.62” 1.50” 1-5/16-12 1-5/16-12 106.3 mm 84.3 mm 61.3 mm 92.9 mm 63.0 mm 41.3 mm 38.1 mm UN UN 90° PS Series Hex 1 Port 1 Hex 2 Port 2 A B DIA D C Male SAE O-Ring Straight Thread – Female 37° Flare Part Number A B C D Dia. Hex 1 Hex 2 Port 1 Port 2 PS490507-4-4 2.70” 2.29” 1.48” 2.08” 1.20” .75” .69” 7/16-20 1/4-18 68.6 mm 58.3 mm 37.5 mm 52.8 mm 30.5 mm 19.0 mm 17.4 mm UNF NPSM PS690507-6-6 2.87” 2.36” 1.51” 2.16” 1.29” .88” .88” 9/16-18 3/8-18 72.8 mm 59.8 mm 38.4 mm 54.8 mm 32.8 mm 22.2 mm 22.2 mm UNF NPSM PS890507-8-8 3.19” 2.60” 1.86” 2.72” 1.73” 1.12” 1.00” 3/4-16 1/2-14 80.9 mm 65.9 mm 47.2 mm 69.2 mm 44.0 mm 28.6 mm 25.4 mm UNF NPSM PS1290507-12-12 3.58” 2.92” 2.24” 3.33” 2.17” 1.38” 1.25” 1-1/16-12 3/4-14 90.9 mm 74.0 mm 56.9 mm 84.5 mm 55.2 mm 35.0 mm 31.8 mm UN NPSM PS1690507-16-16 4.18” 3.32” 2.48” 3.73” 2.48” 1.62” 1.50” 1-5/16-12 1-11 1/2 106.3 mm 84.3 mm 63.1 mm 94.6 mm 63.0 mm 41.3 mm 38.1 mm UN NPSM Hex 1 Port 1 Hex 2 Port 2 A B DIA D C Male SAE O-Ring Straight Thread – Female NPSM Pipe Swivel Part Number A B C D Dia. Hex 1 Hex 2 Port 1 Port 2 PS490506-4-4 2.70” 2.29” 1.47” 2.07” 1.20” .75” .56” 7/16-20 7/16-20 68.6 mm 58.3 mm 37.3 mm 52.5 mm 30.5 mm 19.0 mm 14.3 mm UNF UNF PS690506-6-6 2.87” 2.36” 1.57” 2.22” 1.29” .88” .69” 9/16-18 9/16-18 72.8 mm 59.8 mm 39.9 mm 56.3 mm 32.8 mm 22.2 mm 17.5 mm UNF UNF PS890506-8-8 3.19” 2.60” 1.91” 2.77” 1.73” 1.12” .88” 3/4-16 3/4-16 80.9 mm 65.9 mm 48.4 mm 70.4 mm 44.0 mm 28.6 mm 22.2 mm UNF UNF PS1290506-12-12 3.58” 2.92” 2.34” 3.43” 2.17” 1.38” 1.25” 1-1/16-12 1-1/16-12 90.9 mm 74.0 mm 59.4 mm 87.0 mm 55.2 mm 35.0 mm 31.8 mm UN UN PS1690506-16-16 4.18” 3.32” 2.54” 3.79” 2.48” 1.62” 1.50” 1-5/16-12 1-5/16-12 106.3 mm 84.3 mm 64.6 mm 96.2 mm 63.0 mm 41.3 mm 38.1 mm UN UN Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 D-19 www.parker.com/quickcouplings Swivels D Swivels 90° PS Series Hex 1 Port 1 Port 2 A DIA B Part Number A B Dia. Hex 1 Port 1 Port 2 PS491002-4-4 2.42” 2.01” 1.20” .75” 7/16-20 1/4-18 61.4 mm 51.2 mm 30.5 mm 19.0 mm UNF NPTF PS691002-6-6 2.68” 2.17” 1.29” .88” 9/16-18 3/8-18 68.2 mm 55.2 mm 32.8 mm 22.2 mm UNF NPTF PS891002-8-8 2.96” 2.37” 1.49” 1.12” 3/4-16 1/2-14 75.3 mm 60.3 mm 37.8 mm 28.6 mm UNF NPTF PS1291002-12-12 3.43” 2.77” 1.76” 1.38” 1-1/16-12 3/4-14 87.2 mm 70.4 mm 44.6 mm 35.0 mm UN NPTF PS1691002-16-16 4.03” 3.16” 2.16” 1.62” 1-5/16-12 1-11 1/2 102.3 mm 80.3 mm 54.9 mm 41.3 mm UN NPTF Female SAE Straight Thread – Female Pipe Part Number A B C D Dia. Hex 1 Hex 2 Port 1 Port 2 PS491003-4-4 2.42” 2.01” 1.39” 1.99” 1.20” .75” .56” 7/16-20 7/16-20 61.4 mm 51.2 mm 35.2 mm 50.5 mm 30.5 mm 19.0 mm 14.3 mm UNF UNF PS691003-6-6 2.68” 2.17” 1.44” 2.09” 1.29” .88” .69” 9/16-18 9/16-18 68.2 mm 55.2 mm 36.6 mm 53.0 mm 32.8 mm 22.2 mm 17.5 mm UNF UNF PS891003-8-8 2.96” 2.37” 1.78” 2.64” 1.73” 1.12” .88” 3/4-16 3/4-16 75.3 mm 60.3 mm 45.1 mm 67.1 mm 44.0 mm 28.6 mm 22.2 mm UNF UNF PS1291003-12-12 3.43” 2.77” 2.24” 3.86” 2.17” 1.38” 1.25” 1-1/16-12 1-1/16-12 87.2 mm 70.4 mm 56.9 mm 85.3 mm 55.2 mm 35.0 mm 31.8 mm UN UN PS1691003-16-16 4.03” 3.16” 2.42” 3.66” 2.48” 1.62” 1.50” 1-5/16-12 1-5/16-12 102.3 mm 80.3 mm 61.3 mm 92.9 mm 63.0 mm 41.3 mm 38.1 mm UN UN Female SAE Straight Thread – Male 37° Flare Hex 1 Port 1 Hex 2 Port 2 A B DIA D C Hex 1 Port 1 Hex 2 Port 2 A B DIA D C Part Number A B C D Dia. Hex 1 Hex 2 Port 1 Port 2 PS491005-4-4 2.42” 2.01” 1.38” 1.98” 1.20” .75” .56” 7/16-20 7/16-20 61.4 mm 51.2 mm 35.0 mm 50.2 mm 30.5 mm 19.0 mm 14.3 mm UNF UNF PS691005-6-6 2.68” 2.17” 1.55” 2.20” 1.29” .88” .69” 9/16-18 9/16-18 68.2 mm 55.2 mm 39.4 mm 55.8 mm 32.8 mm 22.2 mm 17.5 mm UNF UNF PS891005-8-8 2.96” 2.37” 1.86” 2.72” 1.73” 1.12” .88” 3/4-16 3/4-16 75.3 mm 60.3 mm 47.2 mm 69.2 mm 44.0 mm 28.6 mm 22.2 mm UNF UNF PS1291005-12-12 3.43” 2.77” 2.40” 3.49” 2.17” 1.38” 1.25” 1-1/16-12 1-1/16-12 87.2 mm 70.4 mm 61.0 mm 88.5 mm 55.2 mm 35.0 mm 31.8 mm UN UN PS1691005-16-16 4.03” 3.16” 2.50” 3.74” 2.48” 1.62” 1.50” 1-5/16-12 1-5/16-12 102.3 mm 80.3 mm 63.4 mm 94.9 mm 63.0 mm 41.3 mm 38.1 mm UN UN Female SAE Straight Thread – Male SAE O-Ring Straight Thread Hex 1 Port 1 Port 2 A DIA B Part Number A B Dia. Hex 1 Port 1 Port 2 PS490510-4-4 2.70” 2.29” 1.20” .75” 7/16-20 7/16-20 68.6 mm 58.3 mm 30.5 mm 19.0 mm UNF UNF PS690510-6-6 2.87” 2.36” 1.29” .88” 9/16-18 9/16-18 72.8 mm 59.8 mm 32.8 mm 22.2 mm UNF UNF PS890510-8-8 3.19” 2.60” 1.73” 1.12” 3/4-16 3/4-16 80.9 mm 65.9 mm 44.0 mm 28.6 mm UNF UNF PS1290510-12-12 3.58” 2.92” 2.17” 1.38” 1-1/16-12 1-1/16-12 90.9 mm 74.0 mm 55.2 mm 35.0 mm UN UN PS1690510-16-16 4.18” 3.32” 2.48” 1.62” 1-5/16-12 1-5/16-12 106.3 mm 84.3 mm 63.0 mm 41.3 mm UN UN Male SAE O-Ring Straight Thread – Female SAE Straight Thread Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 D-20 www.parker.com/quickcouplings Swivels D Swivels Part Number A B C D Dia. Hex 1 Hex 2 Port 1 Port 2 PS491006-4-4 2.42” 2.01” 1.47” 2.07” 1.20” .75” .56” 7/16-20 7/16-20 61.4 mm 51.2 mm 37.3 mm 52.5 mm 30.5 mm 19.0 mm 14.3 mm UNF UNF PS691006-6-6 2.68” 2.17” 1.57” 2.22” 1.29” .88” .69” 9/16-18 9/16-18 68.2 mm 55.2 mm 39.9 mm 56.3 mm 32.8 mm 22.2 mm 17.5 mm UNF UNF PS891006-8-8 2.96” 2.37” 1.91” 2.77” 1.73” 1.12” .88” 3/4-16 3/4-16 75.3 mm 60.3 mm 48.4 mm 70.4 mm 44.0 mm 28.6 mm 22.2 mm UNF UNF PS1291006-12-12 3.43” 2.77” 2.34” 3.43” 2.17” 1.38” 1.25” 1-1/16-12 1-1/16-12 87.2 mm 70.4 mm 59.4 mm 87.0 mm 55.2 mm 35.0 mm 31.8 mm UN UNPS1691006- 16-16 4.03” 3.16” 2.54” 3.79” 2.48” 1.62” 1.50” 1-5/16-12 1-5/16-12 102.3 mm 80.3 mm 64.6 mm 96.2 mm 63.0 mm 41.3 mm 38.1 mm UN UN Hex 1 Port 1 Hex 2 Port 2 A B DIA D C Female SAE Straight Thread – Female 37° Flare Part Number A B C D Dia. Hex 1 Hex 2 Port 1 Port 2 PS491007-4-4 2.42” 2.01” 1.48” 2.08” 1.20” .75” .69” 7/16-20 1/4-18 61.4 mm 51.2 mm 37.5 mm 52.8 mm 30.5 mm 19.0 mm 17.4 mm UNF NPSM PS691007-6-6 2.68” 2.17” 1.51” 2.16” 1.29” .88” .88” 9/16-18 3/8-18 68.2 mm 55.2 mm 38.4 mm 54.8 mm 32.8 mm 22.2 mm 22.2 mm UNF NPSM PS891007-8-8 2.96” 2.37” 1.86” 2.72” 1.73” 1.12” 1.00” 3/4-16 1/2-14 75.3 mm 60.3 mm 47.2 mm 69.2 mm 44.0 mm 28.6 mm 25.4 mm UNF NPSM PS1291007-12-12 3.43” 2.77” 2.24” 3.33” 2.17” 1.38” 1.25” 1-1/16-12 3/4-14 87.2 mm 70.4 mm 56.9 mm 84.5 mm 55.2 mm 35.0 mm 31.8 mm UN NPSM PS1691007-16-16 4.03” 3.16” 2.48” 3.73” 2.48” 1.62” 1.50” 1-5/16-12 1-11 1/2 102.3 mm 80.3 mm 63.1 mm 94.6 mm 63.0 mm 41.3 mm 38.1 mm UN NPSM Hex 1 Port 1 Hex 2 Port 2 A B DIA D C Female SAE Straight Thread – Female NPSM Pipe Swivel 90° PS Series Part Number A B Dia. Hex 1 Port 1 Port 2 PS491010-4-4 2.42” 2.01” 1.20” .75” 7/16-20 7/16-20 61.4 mm 51.2 mm 30.5 mm 19.0 mm UNF UNF PS691010-6-6 2.68” 2.17” 1.29” .88” 9/16-18 9/16-18 68.2 mm 55.2 mm 32.8 mm 22.2 mm UNF UNF PS891010-8-8 2.96” 2.37” 1.73” 1.12” 3/4-16 3/4-16 75.3 mm 60.3 mm 44.0 mm 28.6 mm UNF UNF PS1291010-12-12 3.43” 2.77” 2.17” 1.38” 1-1/16-12 1-1/16-12 87.2 mm 70.4 mm 55.2 mm 35.0 mm UN UN PS1691010-16-16 4.03” 3.16” 2.48” 1.62” 1-5/16-12 1-5/16-12 102.3 mm 80.3 mm 63.0 mm 41.3 mm UN UN Hex 1 Port 1 Port 2 A DIA B Female SAE Straight Thread – Female SAE Straight Thread 3 Piece Design Part Number A B C D Wrench Flats Dia. Port 1 Port 2 PS2491010-20-20 5.91″ 4.63″ 3.43″ 1.27″ 2.63″ 3.36″ 1 5/8-12 1 5/8-12 150.2 mm 117.5 mm 87.0 mm 32.3 mm 66.7 mm 85.2 mm UN UN PS2491010-24-24 5.91″ 4.63″ 3.43″ 1.27″ 2.63″ 3.36″ 1 7/8-12 1 7/8-12 150.2 mm 117.5 mm 87.0 mm 32.3 mm 66.7 mm 85.2 mm UN UN PS3291010-32-32 6.83″ 5.45″ 3.93″ 1.52″ 3.06″ 4.19″ 2 11-1/2 2-1/2-12 179.8 mm 138.4 mm 99.7 mm 38.5 mm 77.6 mm 106.4 mm UN UN Wrench Flats Port 1 Dia Port 2 A B C D Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 D-21 www.parker.com/quickcouplings Swivels D Swivels Repair Kits Seal Options Nitrile (standard unless otherwise designated) A = Aflas™ W = Ethylene Propylene Y = Fluorocarbon Z = Neoprene For Perfluoroelastomer seal option contact the division. Repair Kits/Seal Options Repair Kits come complete with O-Rings, PTFE Back-Up Ring, Cap Screws, Locking Balls, Retaining Ring and grease fitting. Repair kits are suitable for both current and previous design 90° PS Series Swivels. 1/4″ Swivel 3/8″ Swivel 1/2″ Swivel 3/4″ Swivel 1″ Swivel PS4-RPR PS6-RPR PS8-RPR PS12-RPR PS16-RPR PS4Y-RPR PS6Y-RPR PS8Y-RPR PS12Y-RPR PS16Y-RPR PS4A-RPR PS6A-RPR PS8A-RPR PS12A-RPR PS16A-RPR PS4W-RPR PS6W-RPR PS8W-RPR PS12W-RPR PS16W-RPR H2C-PS = Bearing Removal Pneumatic Nipple S Series Swivels Introduction The S Series Swivel product line complements the Quick Coupling Division’s PS Series swivel line by offering a pressure balanced, compact forged body design. As a result of the pressure balanced design, the S Series Swivel does not experience a significant increase in torque as pressure rises. The housing body is forged to provide superior performance and durability in tough applications. This product is great for eliminating hose twist, torque and stress caused by the movement of the hydraulic components where side load to the swivel can be minimized. Features • 3000 psi working pressure rating for all sizes. • Variety of seal options. • Torque value does not significantly increase with pressure. • Dust seals protect the swivel from damaging environmental contaminants. • Field service kits are available for quick and reliable repairs. • 360° swivel eliminates long radius bends, hose twist and stress that can cause premature hose failure. • One piece forged housing eliminates a brazed 90° adapter connection. • Case hardened for enhanced service life. • Compact design to fit into tight areas. Performance Data Specifications S Series Swivel (1/4”, 3/8”, 1/2”, 3/4”, 1”) Test Fluid: Oil – 150 SUS vs. Pressure Drop 40 35 30 25 20 15 10 5 Flow in USGPM 0 5 10 15 20 25 45 Pressure Drop in PSID 0 30 35 40 1/2″ 3/8″ 1/4″ 3/4″ 1″ Body size 1/4″ 3/8″ 1/2″ 3/4″ 1” Maximum Rated Pressure (PSI) 3000 3000 3000 3000 3000* Temperature Range (standard seals) -40° to 250° F Maximum RPM 10 10 10 10 10 * 07 ports on 1” S Series maximum rated pressure is 2600 psi. Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 D-22 www.parker.com/quickcouplings Swivels D Swivels Introduction S Series Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 D-23 www.parker.com/quickcouplings Swivels D Swivels How to Order S Series Port 1 Port 2 Retaining Ring Retainer O-Ring Back-Up Ring Flow Holes Housing O-Ring Back-Up Ring Shaft O-Ring O-Ring Parker S Series Swivel designator * Contact the Division for Price and Availability Housing Port Size (1/16 of an inch) Material and Finish: Blank = Carbon Steel (12L14) w/Chromium-6 Free Plating NI = Carbon Steel (12L14)* Nickel Plating Seal Code: Blank = Nitrile (Standard) E = Ethylene Propylene V = Fluorocarbon Shaft Port Size (1/16 of an inch) S Part Number: S 21 02 V – 8 – 8 NI Housing Port Configuration: 01 = Male NPTF 02 = Female NPTF 03 = Male JIC 37 Degree 05 = Male SAE O-Ring Straight Thread 07 = Female NPSM Pipe Swivel 10 = Female SAE Straight Thread Shaft Port Configuration: 21 = Male NPTF 22 = Female NPTF 23 = Male JIC 37 Degree 25 = Male SAE O-Ring Straight Thread Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 D-24 www.parker.com/quickcouplings Swivels D Swivels Male Pipe – Female NPSM Pipe Swivel Male Pipe – Female Pipe Port 1 Port 2 A B C D Hex 2 Hex 1 Male Pipe – Male 37° Flare Port 1 Port 2 A B C D Hex 2 Hex 1 Port 1 Port 2 A B C D Hex 2 Hex 1 Port 1 Port 2 A B C D Hex 2 Hex 1 Male Pipe – Male Pipe Part Number A B C D HEX 1 HEX 2 PORT 1 PORT 2 S2103-4-4 2.31″ 1.51″ 2.19″ 1.50″ .88″ .88″ 1/4-18 NPTF 7/16-20UNF 58.7 mm 38.4 mm 55.5 mm 38.0 mm 22.2 mm 22.2 mm S2103-6-6 2.31″ 1.51″ 2.19″ 1.50″ .88″ .88″ 3/8-18 NPTF 9/16-18UNF 58.7 mm 38.4 mm 55.5 mm 38.0 mm 22.2 mm 22.2 mm S2103-8-8 2.74″ 1.84″ 2.59″ 1.84″ 1.06″ 1.00″ 1/2-14 NPTF 3/4-16UNF 69.6 mm 46.8 mm 65.8 mm 46.7 mm 27.0 mm 25.4 mm S2103-12-12 3.35″ 2.12″ 3.07″ 2.17″ 1.38″ 1.38″ 3/4-14 NPTF 1-1/16-12UN 85.1 mm 53.9 mm 77.9 mm 55.2 mm 34.9 mm 34.9 mm S2103-16-16 3.95″ 2.54″ 3.01″ 2.11″ 1.63″ 1.69″ 1-11 1/2 NPTF 1-5/16-12UN 100.33 mm 64.5 mm 76.5 mm 53.6 mm 41.4 mm 42.9 mm Part Number A B C D HEX 1 HEX 2 PORT 1 PORT 2 S2101-4-4 2.31″ 1.51″ 2.19″ 1.50″ .88″ .88″ 1/4-18 NPTF 1/4-18 NPTF 58.7 mm 38.4 mm 55.5 mm 38.0 mm 22.2 mm 22.2 mm S2101-6-6 2.31″ 1.51″ 2.19″ 1.50″ .88″ .88″ 3/8-18 NPTF 3/8-18 NPTF 58.7 mm 38.4 mm 55.5 mm 38.0 mm 22.2 mm 22.2 mm S2101-8-8 2.74″ 1.84″ 2.59″ 1.84″ 1.06″ 1.00″ 1/2-14 NPTF 1/2-14 NPTF 69.6 mm 46.8 mm 65.8 mm 46.7 mm 27.0 mm 25.4 mm S2101-12-12 3.35″ 2.1 2″ 3.00″ 2.11″ 1.38″ 1.38″ 3/4-14 NPTF 3/4-14 NPTF 85.1 mm 53.9 mm 76.2 mm 53.5 mm 34.9 mm 34.9 mm Part Number A B C D HEX 1 HEX 2 PORT 1 PORT 2 S2102-4-4 2.31″ 1.51″ 1.78″ 1.09″ .88″ .88″ 1/4-18 NPTF 1/4-18 NPTF 58.7 mm 38.4 mm 45.1 mm 27.6 mm 22.2 mm 22.2 mm S2102-6-6 2.31″ 1.51″ 1.78″ 1.09″ .88″ .88″ 3/8-18 NPTF 3/8-18 NPTF 58.7 mm 38.4 mm 45.1 mm 27.6 mm 22.2 mm 22.2 mm S2102-8-8 2.74″ 1.84″ 2.10″ 1.35″ 1.06″ 1.00″ 1/2-14 NPTF 1/2-14 NPTF 69.6 mm 46.8 mm 53.3 mm 34.3 mm 27.0 mm 25.4 mm S2102-12-12 3.35″ 2.12″ 2.39″ 1.50″ 1.38″ 1.38″ 3/4-14 NPTF 3/4-14 NPTF 85.1 mm 53.9 mm 60.7 mm 38.0 mm 34.9 mm 34.9 mm Part Number A B C D HEX 1 HEX 2 PORT 1 PORT 2 S2107-4-4 2.31″ 1.51″ 2.05″ 1.36″ .88″ .69″ 1/4-18 NPTF 1/4-18 NPSM 58.7 mm 38.4 mm 52.0 mm 34.5 mm 22.2 mm 17.5 mm S2107-6-6 2.31″ 1.51″ 2.07″ 1.38″ .88″ .88″ 3/8-18 NPTF 3/8-18 NPSM 58.7 mm 38.4 mm 52.5 mm 35.1 mm 22.2 mm 22.2 mm S2107-8-8 2.74″ 1.84″ 2.32″ 1.57″ 1.06″ 1.00″ 1/2-14 NPTF 1/2-14 NPSM 69.6 mm 46.8 mm 59.0 mm 39.9 mm 27.0 mm 25.4 mm S2107-12-12 3.35″ 2.12″ 2.74″ 1.85″ 1.38″ 1.25″ 3/4-14 NPTF 3/4-14 NPSM 85.1 mm 53.9 mm 69.5 mm 46.9 mm 34.9 mm 31.8 mm S2107-16-16 3.95″ 2.54″ 3.14″ 2.23″ 1.63″ 1.69″ 1-11 1/2 NPTF 1-11 1/2 NPSM 100.3 mm 64.5 mm 79.8 mm 56.6 mm 41.4 mm 42.9 mm Male Pipe – Female SAE Straight Thread Port 1 Port 2 A B C D Hex 2 Hex 1 Part Number A B C D HEX 1 HEX 2 PORT 1 PORT 2 S2110-6-6 2.31″ 1.51″ 1.78″ 1.09″ .88″ .88″ 3/8-18 NPTF 9/16-18UNF 58.7 mm 38.4 mm 45.1 mm 27.6 mm 22.2 mm 22.2 mm S2110-8-8 2.74″ 1.84″ 2.10″ 1.35″ 1.06″ 1.00″ 1/2-14 NPTF 3/4-16UNF 69.6 mm 46.8 mm 53.3 mm 34.3 mm 27.0 mm 25.4 mm S2110-12-12 3.35″ 2.12″ 2.54″ 1.65″ 1.38″ 1.38″ 3/4-14 NPTF 1-1/16-12UN 85.1 mm 53.9 mm 64.5 mm 41.9 mm 34.9 mm 34.9 mm 90° S Series Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 D-25 www.parker.com/quickcouplings Swivels D Swivels 90° S Series Female Pipe – Female SAE Straight Thread Port 1 Port 2 A B C D Hex 2 Hex 1 Female Pipe – Male Pipe Female Pipe – Female Pipe Female Pipe – Male 37° Flare Port 1 Port 2 A B C D Hex 2 Hex 1 Port 1 Port 2 A B C D Hex 2 Hex 1 Port 1 Port 2 A B C D Hex 2 Hex 1 Part Number A B C D HEX 1 HEX 2 PORT 1 PORT 2 S2210-6-6 2.19″ 1.39″ 1.78″ 1.09″ .88″ .88″ 3/8-18 NPTF 9/16-18UNF 55.6 mm 35.4 mm 45.1 mm 27.6 mm 22.2 mm 22.2 mm S2210-8-8 2.47″ 1.57″ 2.10″ 1.35″ 1.06″ 1.00″ 1/2-14 NPTF 3/4-16UNF 62.7 mm 40.0 mm 53.3 mm 34.3 mm 27.0 mm 25.4 mm S2210-12-12 3.15″ 1.92″ 2.54″ 1.65″ 1.38″ 1.38″ 3/4-14 NPTF 1-1/16-12UN 80.0 mm 48.8 mm 64.5 mm 41.9 mm 34.9 mm 34.9 mm Part Number A B C D HEX 1 HEX 2 PORT 1 PORT 2 S2201-4-4 2.19″ 1.39″ 2.19″ 1.50″ .88″ .88″ 1/4-18 NPTF 1/4-18 NPTF 55.6 mm 35.4 mm 55.5 mm 38.0 mm 22.2 mm 22.2 mm S2201-6-6 2.19″ 1.39″ 2.19″ 1.50″ .88″ .88″ 3/8-18 NPTF 3/8-18 NPTF 55.6 mm 35.4 mm 55.5 mm 38.0 mm 22.2 mm 22.2 mm S2201-8-8 2.47″ 1.57″ 2.59″ 1.84″ 1.06″ 1.00″ 1/2-14 NPTF 1/2-14 NPTF 62.7 mm 40.0 mm 65.8 mm 46.7 mm 27.0 mm 25.4 mm S2201-12-12 3.15″ 1.92″ 3.00″ 2.11″ 1.38″ 1.38″ 3/4-14 NPTF 3/4-14 NPTF 80.0 mm 48.8 mm 76.2 mm 53.5 mm 34.9 mm 34.9 mm Part Number A B C D HEX 1 HEX 2 PORT 1 PORT 2 S2202-4-4 2.19″ 1.39″ 1.78″ 1.09″ .88″ .88″ 1/4-18 NPTF 1/4-18 NPTF 55.6 mm 35.4 mm 45.1 mm 27.6 mm 22.2 mm 22.2 mm S2202-6-6 2.19″ 1.39″ 1.78″ 1.09″ .88″ .88″ 3/8-18 NPTF 3/8-18 NPTF 55.6 mm 35.4 mm 45.1 mm 27.6 mm 22.2 mm 22.2 mm S2202-8-8 2.47″ 1.57″ 2.10″ 1.35″ 1.06″ 1.00″ 1/2-14 NPTF 1/2-14 NPTF 62.7 mm 40.0 mm 53.3 mm 34.3 mm 27.0 mm 25.4 mm S2202-12-12 3.15″ 1.92″ 2.39″ 1.50″ 1.38″ 1.38″ 3/4-14 NPTF 3/4-14 NPTF 80.0 mm 48.8 mm 60.7 mm 38.0 mm 34.9 mm 34.9 mm Part Number A B C D HEX 1 HEX 2 PORT 1 PORT 2 S2203-4-4 2.19″ 1.39″ 2.19″ 1. 50″ .88″ .88″ 1/4-18 NPTF 7/16-20UNF 55.6 mm 35.4 mm 55.5 mm 38.0 mm 22.2 mm 22.2 mm S2203-6-6 2.19″ 1.39″ 2.19″ 1.50″ .88″ .88″ 3/8-18 NPTF 9/16-18UNF 55.6 mm 35.4 mm 55.5 mm 38.0 mm 22.2 mm 22.2 mm S2203-8-8 2.47″ 1.57″ 2.59″ 1.84″ 1.06″ 1.00″ 1/2-14 NPTF 3/4-16UNF 62.7 mm 40.0 mm 65.8 mm 46.7 mm 27.0 mm 25.4 mm S2203-12-12 3.15″ 1.92″ 3.07″ 2.17″ 1.38″ 1.38″ 3/4-14 NPTF 1-1/16-12UN 80.0 mm 48.8 mm 77.9 mm 55.2 mm 34.9 mm 34.9 mm S2203-16-16 3.55″ 2.13″ 3.01″ 2.11″ 1.63″ 1.69″ 1-11 1/2 NPTF 1-5/16-12UN 90.2 mm 54.1 mm 76.5 mm 53.6 mm 41.4 mm 42.9 mm Female Pipe – Female NPSM Pipe Swivel Port 1 Port 2 A B C D Hex 2 Hex 1 Part Number A B C D HEX 1 HEX 2 PORT 1 PORT 2 S2207-4-4 2.19″ 1.39″ 2.05″ 1.36″ .88″ .69″ 1/4-18 NPTF 1/4-18 NPSM 55.6 mm 35.4 mm 52.0 mm 34.5 mm 22.2 mm 17.5 mm S2207-6-6 2.19″ 1.39″ 2.07″ 1.38″ .88″ .88″ 3/8-18 NPTF 3/8-18 NPSM 55.6 mm 35.4 mm 52.5 mm 35.1 mm 22.2 mm 22.2 mm S2207-8-8 2.47″ 1.57″ 2.32″ 1.57″ 1.06″ 1.00″ 1/2-14 NPTF 1/2-14 NPSM 62.7 mm 40.0 mm 59.0 mm 39.9 mm 27.0 mm 25.4 mm S2207-12-12 3.15″ 1.92″ 2.74″ 1.85″ 1.38″ 1.25″ 3/4-14 NPTF 3/4-14 NPSM 80.0 mm 48.8 mm 69.5 mm 46.9 mm 34.9 mm 31.8 mm S2207-16-16 3.55″ 2.13″ 3.14″ 2.23″ 1.63″ 1.69″ 1-11 1/2 NPTF 1-11 1/2 NPSM 90.2 mm 54.1 mm 79.8 mm 56.6 mm 41.4 mm 42.9 mm Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 D-26 www.parker.com/quickcouplings Swivels D Swivels Male 37° Flare – Male Pipe Male 37° Flare – Female Pipe Male 37° Flare – Male 37° Flare Port 1 Port 2 A B C D Hex 2 Hex 1 Port 1 Port 2 A B C D Hex 2 Hex 1 Port 1 Port 2 A B C D Hex 2 Hex 1 Part Number A B C D HEX 1 HEX 2 PORT 1 PORT 2 S2302-4-4 2.41″ 1.61″ 1.78″ 1.09″ .88″ .88″ 7/16-20UNF 1/4-18 NPTF 61.2 mm 40.9 mm 45.1 mm 27.6 mm 22.2 mm 22.2 mm S2302-6-6 2.41″ 1.61″ 1.78″ 1.09″ .88″ .88″ 9/16-18UNF 3/8-18 NPTF 61.2 mm 40.9 mm 45.1 mm 27.6 mm 22.2 mm 22.2 mm S2302-8-8 2.63″ 1.73″ 2.10″ 1.35″ 1.06″ 1.00″ 3/4-16UNF 1/2-14 NPTF 66.8 mm 44.0 mm 53.3 mm 34.3 mm 27.0 mm 25.4 mm S2302-12-12 3.33″ 2.10″ 2.39″ 1.50″ 1.38″ 1.38″ 1-1/16-12UN 3/4-14 NPTF 84.6 mm 53.4 mm 60.7 mm 38.0 mm 34.9 mm 34.9 mm Part Number A B C D HEX 1 HEX 2 PORT 1 PORT 2 S2301-4-4 2.41″ 1.61″ 2.19″ 1.50″ .88″ .88″ 7/16-20UNF 1/4-18 NPTF 61.2 mm 40.9 mm 55.5 mm 38.0 mm 22.2 mm 22.2 mm S2301-6-6 2.41″ 1.61″ 2.19″ 1.50″ .88″ .88″ 9/16-18UNF 3/8-18 NPTF 61.2 mm 40.9 mm 55.5 mm 38.0 mm 22.2 mm 22.2 mm S2301-8-8 2.63″ 1.73″ 2.59″ 1.84″ 1.06″ 1.00″ 3/4-16UNF 1/2-14 NPTF 66.8 mm 44.0 mm 65.8 mm 46.7 mm 27.0 mm 25.4 mm S2301-12-12 3.33″ 2.10″ 3.00″ 2.11″ 1.38″ 1.38″ 1-1/16-12UN 3/4-14 NPTF 84.6 mm 53.4 mm 76.2 mm 53.5 mm 34.9 mm 34.9 mm Part Number A B C D HEX 1 HEX 2 PORT 1 PORT 2 S2303-4-4 2.41″ 1.61″ 2.19″ 1.50″ .88″ .88″ 7/16-20UNF 7/16-20UNF 61.2 mm 40.9 mm 55.5 mm 38.0 mm 22.2 mm 22.2 mm S2303-6-6 2.41″ 1.61″ 2.19″ 1.50″ .88″ .88″ 9/16-18UNF 9/16-18UNF 61.2 mm 40.9 mm 55.5 mm 38.0 mm 22.2 mm 22.2 mm S2303-8-8 2.63″ 1.73″ 2.59″ 1.84″ 1.06″ 1.00″ 3/4-16UNF 3/4-16UNF 66.8 mm 44.0 mm 65.8 mm 46.7 mm 27.0 mm 25.4 mm S2303-10-10 2.63″ 1.73″ 2.59″ 1.84″ 1.06″ 1.00″ 7/8-14UNF 7/8-14UNF 66.8 mm 44.0 mm 65.8 mm 46.7 mm 27.0 mm 25.4 mm S2303-12-12 3.33″ 2.10″ 3.07″ 2.17″ 1.38″ 1.38″ 1-1/16-12UN 1-1/16-12UN 84.6 mm 53.4 mm 77.9 mm 55.2 mm 34.9 mm 34.9 mm S2303-16-16 4.05″ 2.64″ 3.01″ 2.11″ 1.63″ 1.69″ 1-5/16-12UN 1-5/16-12UN 102.9 mm 67.1 mm 76.5 mm 53.6 mm 41.4 mm 42.9 mm Male 37° Flare – Female NPSM Pipe Swivel Port 1 Port 2 A B C D Hex 2 Hex 1 Part Number A B C D HEX 1 HEX 2 PORT 1 PORT 2 S2307-4-4 2.41″ 1.61″ 2.05″ 1.36″ .88″ .69″ 7/16-20UNF 1/4-18 NPSM 61.2 mm 40.9 mm 52.0 mm 34.5 mm 22.2 mm 17.5 mm S2307-6-6 2.41″ 1.61″ 2.07″ 1.38″ .88″ .88″ 9/16-18UNF 3/8-18 NPSM 61.2 mm 40.9 mm 52.5 mm 35.1 mm 22.2 mm 22.2 mm S2307-8-8 2.63″ 1.73″ 2.32″ 1.57″ 1.06″ 1.00″ 3/4-16UNF 1/2-14 NPSM 66.8 mm 44.0 mm 59.0 mm 39.9 mm 27.0 mm 25.4 mm S2307-12-12 3.33″ 2.10″ 2.74″ 1.85″ 1.38″ 1.25″ 1-1/16-12UN 3/4-14 NPSM 84.6 mm 53.4 mm 69.5 mm 46.9 mm 34.9 mm 31.8 mm Male 37° Flare – Female SAE Straight Thread Port 1 Port 2 A B C D Hex 2 Hex 1 Part number A B C D HEX 1 HEX 2 PORT 1 PORT 2 S2310-6-6 2.41″ 1.61″ 1.78″ 1.09″ .88″ .88″ 9/16-18UNF 9/16-18UNF 61.2 mm 40.9 mm 45.1 mm 27.6 mm 22.2 mm 22.2 mm S2310-8-8 2.63″ 1.73″ 2.10″ 1.35″ 1.06″ 1.00″ 3/4-16UNF 3/4-16UNF 66.8 mm 44.0 mm 53.3 mm 34.3 mm 27.0 mm 25.4 mm S2310-12-12 3.33″ 2.10″ 2.54″ 1.65″ 1.38″ 1.38″ 1-1/16-12UN 1-1/16-12UN 84.6 mm 53.4 mm 64.5 mm 41.9 mm 34.9 mm 34.9 mm 90° S Series Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 D-27 www.parker.com/quickcouplings Swivels D Swivels 90° S Series Male SAE O-Ring Straight Thread – Male 37° Flare Male SAE O-Ring Straight Thread – Female NPSM Pipe Swivel Male SAE O-Ring Straight Thread – Female SAE Straight Thread Male SAE O-Ring Straight Thread – Male Pipe Male SAE O-Ring Straight Thread – Female Pipe Port 1 Port 2 A B C D Hex 2 Hex 1 Port 1 Port 2 A B C D Hex 2 Hex 1 Port 1 Port 2 A B C D Hex 2 Hex 1 Port 1 Port 2 A B C D Hex 2 Hex 1 Port 1 Port 2 A B C D Hex 2 Hex 1 Part number A B C D HEX 1 HEX 2 PORT 1 PORT 2 S2503-6-6 2.13″ 1.33″ 2.19″ 1.50″ .88″ .88″ 9/16-18UNF 9/16-18UNF 54.1 mm 33.8 mm 55.5 mm 38.0 mm 22.2 mm 22.2 mm S2503-8-8 2.40″ 1.50″ 2.59″ 1.84″ 1.06″ 1.00″ 3/4-16UNF 3/4-16UNF 61.0 mm 38.2 mm 65.8 mm 46.7 mm 27.0 mm 25.4 mm S2503-10-10 2.54″ 1.64″ 2.59″ 1.84″ 1.06″ 1.00″ 7/8-14UNF 7/8-14UNF 64.5 mm 41.7 mm 65.8 mm 46.7 mm 27.0 mm 25.4 mm S2503-12-12 3.40″ 2.17″ 3.07″ 2.17″ 1.38″ 1.38″ 1-1/16-12UN 1-1/16-12UN 86.4 mm 55.2 mm 77.9 mm 55.2 mm 34.9 mm 34.9 mm S2503-16-16 3.75″ 2.33″ 3.01″ 2.11″ 1.63″ 1.69″ 1-5/16-12UN 1-5/16-12UN 95.3 mm 59.2 mm 76.5 mm 53.6 mm 41.4 mm 42.9 mm Part number A B C D HEX 1 HEX 2 PORT 1 PORT 2 S2507-6-6 2.13″ 1.33″ 2.07″ 1.38″ .88″ .88″ 9/16-18UNF 3/8-18 NPSM 54.1 mm 33.8 mm 52.5 mm 35.1 mm 22.2 mm 22.2 mm S2507-8-8 2.40″ 1.50″ 2.32″ 1.57″ 1.06″ 1.00″ 3/4-16UNF 1/2-14 NPSM 61.0 mm 38.2 mm 59.0 mm 39.9 mm 27.0 mm 25.4 mm S2507-12-12 3.75″ 2.17″ 2.74″ 1.85″ 1.38″ 1.25″ 1-1/16-12UN 3/4-14 NPSM 86.4 mm 55.2 mm 69.5 mm 46.9 mm 34.9 mm 31.8 mm S2507-16-16 3.75″ 2.33″ 3.14″ 2.23″ 1.63″ 1.69″ 1-5/16-12UN 1-11 1/2 NPSM 95.3 mm 59.2 mm 79.8 mm 56.6 mm 41.4 mm 42.9 mm Part number A B C D HEX 1 HEX 2 PORT 1 PORT 2 S2510-6-6 2.13″ 1.33″ 1.78″ 1.09″ .88″ .88″ 9/16-18UNF 9/16-18UNF 54.1 mm 33.8 mm 45.1 mm 27.6 mm 22.2 mm 22.2 mm S2510-8-8 2.40″ 1.50″ 2.10″ 1.35″ 1.06″ 1.00″ 3/4-16UNF 3/4-16UNF 61.0 mm 38.2 mm 53.3 mm 34.3 mm 27.0 mm 25.4 mm S2510-12-12 3.40″ 2.17″ 2.54″ 1.65″ 1.38″ 1.38″ 1-1/16-12UN 1-1/16-12UN 86.4 mm 55.2 mm 64.5 mm 41.9 mm 34.9 mm 34.9 mm Part number A B C D HEX 1 HEX 2 PORT 1 PORT 2 S2501-6-6 2.13″ 1.33″ 2.19″ 1.50″ .88″ .88″ 9/16-18UNF 3/8-18 NPTF 54.1 mm 33.8 mm 55.5 mm 38.0 mm 22.2 mm 22.2 mm S2501-8-8 2.40″ 1.50″ 2.59″ 1.84″ 1.06″ 1.00″ 3/4-16UNF 1/2-14 NPTF 61.0 mm 38.2 mm 65.8 mm 46.7 mm 27.0 mm 25.4 mm S2501-12-12 3.40″ 2.17″ 3.00″ 2.11″ 1.38″ 1.38″ 1-1/16-12UN 3/4-14 NPTF 86.4 mm 55.2 mm 76.2 mm 53.5 mm 34.9 mm 34.9 mm Part number A B C D HEX 1 HEX 2 PORT 1 PORT 2 S2502-6-6 2.13″ 1.33″ 1.78″ 1.09″ .88″ .88″ 9/16-18UNF 3/8-18 NPTF 54.1 mm 33.8 mm 45.1 mm 27.6 mm 22.2 mm 22.2 mm S2502-8-8 2.40″ 1.50″ 2.10″ 1.35″ 1.06″ 1.00″ 3/4-16UNF 1/2-14 NPTF 61.0 mm 38.2 mm 53.3 mm 34.3 mm 27.0 mm 25.4 mm S2502-12-12 3.40″ 2.17″ 2.39″ 1.50″ 1.38″ 1.38″ 1-1/16-12UN 3/4-14 NPTF 86.4 mm 55.2 mm 60.7 mm 38.0 mm 34.9 mm 34.9 mm Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 D-28 www.parker.com/quickcouplings Swivels D Swivels Repair Kits/Seal Options Repair Kits come complete with primary O-Rings, PTFE backup rings, external and internal dust seals, retaining ring and instruction sheet. Repair Kits Nitrile Seals EP Seals Fluorocarbon Seals Size Kit Number Size Kit Number Size Kit Number -4/-6 RK-4/6N -4/-6 RK-4/6E -4/-6 RK-4/6V -8/-10 RK-8N -8/-10 RK-8E -8/-10 RK-8V -12 RK-12N -12 RK-12E -12 RK-12V -16 RK-16N -16 RK-16E -16 RK-16V E Valves Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 E-1 www.parker.com/quickcouplings Valves Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 E-2 www.parker.com/quickcouplings Valves E Valves Introduction Multiple Hydraulic System Applications Parker Check Valves are unidirectional flow control devices used primarily in hydraulic systems to eliminate potential damage caused by fluid back pressure. Offered in many configurations, Parker can satisfy most hydraulic system applications. Parker’s in-line style check valves are available in a variety of sizes, pressure ratings, flow capacities and crack pressures. H1, HM1 and PV Series Pressure / Vacuum Relief Valves are used to create and maintain a positive pressure in hydraulic tanks and reservoirs. These pressurized reservoir valves provide the following benefits: • Prevents pump cavitation by assuring a positive supply of oil at the pump inlet • Minimizes the tank breathing of outside, moist, contaminated air • Filters all incoming air As oil is drawn from the reservoir and pumped to the circuit, a vacuum is created in the reservoir. The vacuum relief valve opens to allow filtered air to enter. As oil is pumped back into the reservoir, air pressure builds. Additionally, as the oil heats, the pressure inside the reservoir increases. When the pressure exceeds the relief valve setting, the excess pressure is vented to atmosphere. Normally, the pressure will fluctuate between zero and the pressure relief setting without opening either valve. This can significantly reduce the breathing of outside air and minimize the chance for moisture and contamination to enter. TH Series Thermal Bypass Valves ensure efficient equipment operation at any temperature. These valves are ideally suited for hydrostatic drive circuits which require fast warm-up, controlled fluid temperatures and low return line back pressure. When installed in a return line of a hydraulic circuit that utilizes an oil cooler, this valve will modulate fluid temperature by either shifting return line flow through the cooler, or bypassing directly to the reservoir. An integral pressure relief function automatically releases excess pressure to the reservoir if the cooler becomes restricted and the inlet pressure becomes excessive. Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 E-3 www.parker.com/quickcouplings Valves E Valves Table of Contents Introduction …………………………………………………….E-2 Check Valves Features, Selection Guide & General Technical Information ……………………………………E-4 CV Series……………………………………………E-9 – E-11 Ordering Information ……………………………………..E-11 DC Series …………………………………………E-12 – E-13 Ordering Information ……………………………………..E-13 DT Series……………………………………………..E-5 – E-8 Ordering Information ……………………………………….E-8 2600 Series (Swing Type) …………………………….E-14 Ordering Information ……………………………………..E-14 Pressure/Vacuum Relief Valves H1 & HM1 Series …………………………………………E-15 Ordering Information ……………………………………..E-15 PV Series…………………………………………………….E-16 Ordering Information ……………………………………..E-16 Thermal Bypass Valves TH Series…………………………………………………….E-17 Ordering Information ……………………………………..E-18 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 E-4 www.parker.com/quickcouplings Check Valves E Valves Technical Information Features Parker’s Check Valves employ several unique features that insure years of trouble-free operation. Specific features for each series of check valves are listed within this section. Crack Pressure Crack pressure refers to the amount of fluid pressure in the free flow direction required to move the poppet off the seat. The normal crack pressure setting is 5 PSI; however, other crack pressures are available to allow the check valve to perform special circuit functions, or operate under unique conditions. Check valves are not field repairable or adjustable. Crack pressure settings are made at the factory only. The graphic symbol for a check-valve is: TYPICAL HYDRAULIC CIRCUIT. THE CHECK VALVE IS USED TO PROTECT THE PUMP BY PREVENTING PRESSURE FROM RETURNING TO THE OUTLET PORT OF THE PUMP. Oil cooler bypass circuit. If return line pressure becomes excessive due to resistance through oil cooler (such as startup in cold weather). Check valve opens and allows oil to bypass the cooler and flow to the tank. CYLINDER CONTROL VALVE TANK PUMP CHECK VALVE TANK RELIEF VALVE Outlet Port Poppet Seat Pressure at outlet port. Poppet is against seat. Flow is blocked at seat. Poppet Seat Inlet Port Outlet Port Pressure at inlet port. Poppet is moved off seat. Flow is allowed through valve. Inlet Port Crack Rated Pressure Body Size Material Pressure Range CV Series 1/4 – 1″ Steel 3000 PSI 5-130 PSI DT Series 1/4 – 1 1/4″ Steel 5000 PSI 5-200 PSI DC Series 1/4 – 2” Steel up to 5000 PSI 5-100 PSI Applications Selection Guide Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 E-5 www.parker.com/quickcouplings Check Valves E Valves DT Series Features 1. Compact Design. Easy to plumb into tight circuits. 2. All steel construction. No internal gaskets or seals to wear out. 3. One-piece body eliminates threads and seals that may be potential leakage points. 4. Smooth flow stream. Poppet spring is isolated from flow stream. 5. Variety of end fittings. 6. Optional crack pressures available from 1 to 200 PSI. 7. Chromium-6 Free plated exterior finish. 8. Nitrile O-Ring included on MO and MS fittings. 9. Captive O-Ring Groove is standard on MS end fittings. F L OW F L OW F L OW F L OW F L OW DT-MFMF Male Flare 37° JIC Inlet to Male Flare 37° JIC Outlet DT-MFMO Male Flare 37° JIC Inlet to Male O-Ring Boss Outlet DT-MOMF Male O-Ring Boss Inlet to Male Flare 37° JIC Outlet F L OW DT-MOMS Male O-Ring Boss Inlet to Male Seal-Lok® Outlet DT-MSMO Male Seal-Lok® Inlet to Male O-Ring Boss Outlet DT-MSMS Male Seal-Lok® Inlet to Male Seal-Lok® Outlet Parker DT Series Check Valves Offer the Features of a Compact Body Size, and 5000 PSI Maximum Operating Pressure The DT Series check valves utilize the dependable, internal design features found in Parker check valves, but with the added benefit and convenience of compact design. Sizes are available from 1/4″ to 1-1/4″ with six different Fitting Styles. The DT Series expands Parker’s high quality product line of versatile and efficient check valves. Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 E-6 www.parker.com/quickcouplings Check Valves E Valves Valve Hex ** Std Crack Size Inlet Port Outlet Port Size Pressures (inch) Part Number Thread Dimensions (in) Thread (inch) (PSI) A B C D E F 3/8 DT-370-MFMF-** 9/16-18 UNF .56 .44 .56 9/16-18 UNF .75 1, 5, 65 1/2 DT-500-MFMF-** 3/4-16 UNF .66 .50 .66 3/4-16 UNF .88 5, 65 5/8 DT-620-MFMF-** 7/8-14 UNF .76 .50 .76 7/8-14 UNF 1.06 5 3/4 DT-750-MFMF-** 1-1/16 – 12 UN .86 .50 .86 1-1/16 – 12 UN 1.25 1, 5, 65 1 DT-1000-MFMF-** 1-5/16 – 12 UN .91 .62 .91 1-5/16 – 12 UN 1.50 5, 65 1-1/4 DT-1250-MFMF-** 1-5/8 – 12 UN .96 1.06 .96 1-5/8 – 12 UN 1.88 1, 5 DT-MFMF Male Flare 37° JIC Inlet to Male Flare 37° JIC Outlet A E B C D F L OW F Hex DT Series DT-MFMO Male Flare 37° JIC Inlet to Male O-Ring Boss Outlet DT-MOMF Male O-Ring Boss Inlet to Male Flare 37° JIC Outlet A E B C D F L OW F Hex A E B C D F L OW F Hex Valve Hex ** Std Crack Size Inlet Port Outlet Port Size Pressures (inch) Part Number Thread Dimensions (in) Thread (inch) (PSI) A B C D E F 1/4 DT-250-MFMO-** 7/16-20 UNF .55 .44 .43 7/16-20 UNF .62 5 3/8 DT-370-MFMO-** 9/16-18 UNF .56 .44 .47 9/16-18 UNF .75 1, 5, 65 1/2 DT-500-MFMO-** 3/4-16 UNF .66 .50 .55 3/4-16 UNF .88 5, 65 5/8 DT-620-MFMO-** 7/8-14 UNF .76 .50 .63 7/8-14 UNF 1.06 5 3/4 DT-750-MFMO-** 1-1/16 – 12 UN .86 .50 .73 1-1/16 – 12 UN 1.25 1, 5, 65 1 DT-1000-MFMO-** 1-5/16 – 12 UN .91 .62 .73 1-5/16 – 12 UN 1.50 5, 65 1-1/4 DT-1250-MFMO-** 1-5/8 – 12 UN .96 1.06 .73 1-5/8 – 12 UN 1.88 1, 5 Valve Hex ** Std Crack Size Inlet Port Outlet Port Size Pressures (inch) Part Number Thread Dimensions (in) Thread (inch) (PSI) A B C D E F 1/4 DT-250-MOMF-** 7/16-20 UNF .43 .44 .55 7/16-20 UNF .62 5 3/8 DT-370-MOMF-** 9/16-18 UNF .47 .44 .56 9/16-18 UNF .75 1, 5, 65 1/2 DT-500-MOMF-** 3/4-16 UNF .55 .50 .66 3/4-16 UNF .88 5, 65 5/8 DT-620-MOMF-** 7/8-14 UNF .63 .50 .76 7/8-14 UNF 1.06 5 3/4 DT-750-MOMF-** 1-1/16 – 12 UN .73 .50 .86 1-1/16 – 12 UN 1.25 1, 5, 65 1 DT-1000-MOMF-** 1-5/16 – 12 UN .73 .62 .91 1-5/16 – 12 UN 1.50 5, 65 1-1/4 DT-1250-MOMF-** 1-5/8 – 12 UN .73 1.06 .96 1-5/8 – 12 UN 1.88 1, 5 Specifications The DT Series check valves have a Maximum Operating Pressure of 5000 PSI. Standard crack pressures are 1, 5, and 65 PSI depending on the port size and configuration. Other crack pressures up to 200 PSI in 5 PSI increments are available upon request. Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 E-7 www.parker.com/quickcouplings Check Valves E Valves DT Series DT-MOMS Male O-Ring Boss Inlet to Male Seal-Lok® Outlet DT-MSMO Male Seal-Lok® Inlet to Male O-Ring Boss Outlet DT-MSMS Male Seal-Lok® Inlet to Male Seal-Lok® Outlet A E B C D F L OW F Hex A F Hex E B C D F L OW A B E C D F L OW F Hex Valve Hex ** Std Crack Size Inlet Port Outlet Port Size Pressures (inch) Part Number Thread Dimensions (in) Thread (inch) (PSI) A B C D E F 1/4 DT-250-MOMS-** 7/16-20 UNF .43 .45 .39 9/16-18 UNF .62 5 3/8 DT-370-MOMS-** 9/16-18 UNF .47 .44 .44 11/16-16 UN .75 1, 5, 65 1/2 DT-500-MOMS-** 3/4-16 UNF .55 .50 .51 13/16-16 UN .88 5, 65 5/8 DT-620-MOMS-** 7/8-14 UNF .63 .50 .62 1-14 UNS 1.06 5 3/4 DT-750-MOMS-** 1-1/16 – 12 UN .73 .50 .68 1-3/16 – 12 UN 1.25 1, 5, 65 1 DT-1000-MOMS-** 1-5/16 – 12 UN .73 .62 .70 1-7/16 – 12 UN 1.50 5, 65 1-1/4 DT-1250-MOMS-** 1-5/8 – 12 UN .73 1.06 .70 1-11/16 – 12 UN 1.88 1, 5 Valve Hex ** Std Crack Size Inlet Port Outlet Port Size Pressures (inch) Part Number Thread Dimensions (in) Thread (inch) (PSI) A B C D E F 3/8 DT-370-MSMO-** 11/16-16 UN .44 .44 .47 9/16-18 UNF .75 1, 5, 65 1/2 DT-500-MSMO-** 13/16-16 UN .51 .50 .55 3/4-16 UNF .88 5, 65 5/8 DT-620-MSMO-** 1-14 UNS .62 .49 .63 7/8-14 UNF 1.06 5 3/4 DT-750-MSMO-** 1-3/16 – 12 UN .68 .50 .73 1-1/16 – 12 UN 1.25 1, 5, 65 1 DT-1000-MSMO-** 1-7/16 – 12 UN .70 .62 .73 1-5/16 – 12 UN 1.50 5, 65 1-1/4 DT-1250-MSMO-** 1-11/16 – 12 UN .70 1.06 .73 1-5/8 – 12 UN 1.88 1, 5 Valve Hex ** Std Crack Size Inlet Port Outlet Port Size Pressures (inch) Part Number Thread Dimensions (in) Thread (inch) (PSI) A B C D E F 3/8 DT-370-MSMS-** 11/16-16 UN .44 .44 .44 11/16-16 UN .75 1, 5, 65 1/2 DT-500-MSMS-** 13/16-16 UN .51 .50 .51 13/16-16 UN .88 5, 65 5/8 DT-620-MSMS-** 1-14 UNS .62 .50 .62 1-14 UNS 1.06 5 3/4 DT-750-MSMS-** 1-3/16 -12 UN .68 .50 .68 1-3/16 – 12 UN 1.25 1, 5, 65 1 DT-1000-MSMS-** 1-7/16 – 12 UN .70 .62 .70 1-7/16 – 12 UN 1.50 5, 65 1-1/4 DT-1250-MSMS-** 1-11/16 – 12 UN .70 1.06 .70 1-11/16 – 12 UN 1.88 1, 5 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 E-8 www.parker.com/quickcouplings Check Valves E Valves DT Series Flow Data 0 10 20 30 40 50 60 70 80 90 100 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 1/2″ & 5/8″ (DT-500 / DT-620) 3/4″ (DT-750) DT Series (1/2″, 5/8″ & 3/4″) Test Fluid: Oil – 200 SUS Flow in USGPM Pressure Drop in PSID Ordering Information CRACK PRESSURE 01 – 1 PSI 05 – 5 PSI 65 – 65 PSI Other Crack Pressures up to 200 PSI in 5 PSI increments are available. Contact the Division for price and delivery on non-standard crack pressures D T- ✱ ✱ ✱ – ✱ ✱ ✱ ✱ – ✱ ✱ SERIES SIZE 250 – 1/4î 370 – 3/8″ 500 – 1/2″ 620 – 5/8” 750 – 3/4″ 1000 – 1″ 1250 – 1-1/4″ FITTING STYLE MFMF – MFMO – MOMF – MOMS – MSMO – MSMS – Male Flare Inlet to Male Flare Outlet Male Flare Inlet to Male O-Ring Boss Outlet Male O-Ring Boss Inlet to Male Flare Outlet Male O-Ring Boss Inlet to Male Face Seal Outlet Male Face Seal Inlet to Male O-Ring Boss Outlet Male Face Seal Inlet to Male Face Seal Outlet 0 10 20 30 40 50 60 70 80 90 100 110 0 1 2 3 4 5 6 7 8 9 10 Pressure Drop in PSID DT Series (1/4″ & 3/8″) Test Fluid: Oil – 200 SUS Flow in USGPM 3/8″ (DT-370) 1/4″ (DT-250) 0 20 40 60 80 100 120 140 160 180 200 0 10 20 30 40 50 60 70 80 90 1″ (DT-1000) 1-1/4″ (DT-1250) DT Series (1″ & 1-1/4″) Test Fluid: Oil – 200 SUS Flow in USGPM Pressure Drop in PSID Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 E-9 www.parker.com/quickcouplings Check Valves E Valves CV Series CV Series Check Valves Offer Low Pressure Drop and High Flow Parker’s CV Series check valves are a rugged built and versatile product designed to protect hydraulic systems from fluid back pressure. The CV Series compliments the DT Series by adding the feature of modular design. The larger body results in less pressure drop and increased performance. The CV Series are in-line unidirectional valves, available in sizes 1/4” to 1”, with a pressure rating of up to 3000 PSI, and flow capacities to 100 GPM. Standard spring crack pressures are 5 and 65 PSI. Other crack pressures available upon request. 1. 2. 3 4. 6. 7. 8. 5. Features 1. Nitrile O-ring is standard in the body assembly. Note port O-rings are included on the MO and MS ports. 2. All-steel construction 3. Valve seats resist damage from shocks, surges and contamination. 4. Poppet has an oil retention groove that lubricates the bore and eliminates galling. 5. Poppet spring is isolated from the liquid flow stream, minimizing turbulence. 6. Poppet is heat treated to help prevent damage from shocks, surges and galling. 7. Close tolerance fit between poppet and poppet retainer creates a cushion that protects valve from surge shock damage. 8. Optional crack pressures available upon request. CV-MFMF Male Flare 37° JIC Inlet to Male Flare 37° JIC Outlet CV-MOMS Male O-Ring Boss Inlet to Male Seal-Lok® Outlet Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 E-10 www.parker.com/quickcouplings Check Valves E Valves CV-MFMF Male Flare 37° JIC Inlet to Male Flare 37° JIC Outlet A B HEX TYP CV-MOMS Male O-Ring Boss Inlet to Male Seal-Lok® Outlet A B HEX TYP Max Valve ** Std Crack Operating Size Inlet Port Dimensions Outlet Port Pressures Pressure (inch) Part Number Thread (inch) Thread (PSI) (PSI) A B Hex 1/4 CV-250-MFMF-** 7/16-20 UNF 1.53 .68 7/16-20 UNF 5, 65 3000 3/8 CV-370-MFMF-** 9/16-18 UNF 1.75 .81 9/16-18 UNF 5, 65 3000 1/2 CV-500-MFMF-** 3/4-16 UNF 2.22 1.00 3/4-16 UNF 5, 65 3000 5/8 CV-620-MFMF-** 7/8-14 UNF 2.41 1.12 7/8-14 UNF 5, 65 3000 3/4 CV-750-MFMF-** 1-1/16-12 UN 2.75 1.38 1-1/16-12 UN 5, 65 3000 1 CV-1000-MFMF-** 1-5/16-12 UN 3.31 1.62 1-5/16-12 UN 5, 65 3000 Max Valve ** Std Crack Operating Size Inlet Port Dimensions Outlet Port Pressures Pressure (inch) Part Number Thread (inch) Thread (PSI) (PSI) A B Hex 1/4 CV-250-MOMS-** 7/16-20 UNF 1.53 .68 9/16-18 UNF 5, 65 3000 3/8 CV-370-MOMS-** 9/16-18 UNF 1.75 .81 11/16-16 UN 5, 65 3000 1/2 CV-500-MOMS-** 3/4-16 UNF 2.22 1.00 13/16-16 UN 5, 65 3000 5/8 CV-620-MOMS-** 7/8-14 UNF 2.41 1.12 1-14 UNS 5, 65 3000 3/4 CV-750-MOMS-** 1-1/16-12 UN 2.75 1.38 1-3/16-12 UN 5, 65 3000 1 CV-1000-MOMS-** 1-5/16-12 UN 3.31 1.62 1-7/16-12 UN 5, 65 3000 CV Series Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 E-11 www.parker.com/quickcouplings Check Valves E Valves CV Series Flow Data 100 90 80 70 60 50 40 30 20 10 0 10 20 30 40 50 60 70 80 90 100 Flow in USGPM Pressure Drop in PSID 1/2″ & 5/8″ (CV-500 / CV-620) 3/4″ (CV-750) 1″ (CV-1000) CV Series (1/2″, 5/8″, 3/4″ & 1″) Test Fluid: Oil – 200 SUS 70 60 50 40 30 20 10 0 2 4 6 8 10 12 14 16 Flow in USGPM Pressure Drop in PSID 1/4″ (CV-250) 3/8″ (CV-370) CV Series (1/4″ & 3/8″) Test Fluid: Oil – 200 SUS SIZE 250 – 1/4” 370 – 3/8″ 500 – 1/2″ 620 – 5/8” 750 – 3/4″ 1000 – 1″ FITTING STYLE MFMF – MOMS – Male Flare Inlet to Male Flare Outlet Male O-Ring Boss Inlet to Male Seal-Lok® Outlet CRACK PRESSURE 05 – 5 PSI 65 – 65 PSI Other Crack Pressures up to 200 PSI in 5 PSI increments are available. Contact the Division for price and delivery on non-standard crack pressures C V- ✱ ✱ ✱ – ✱ ✱ ✱ ✱ – ✱ ✱ SERIES Ordering Information Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 E-12 www.parker.com/quickcouplings Check Valves E Valves Max Valve ** Std Crack Operating Size Inlet Port Dimensions Outlet Port Pressures Pressure (inch) Part Number Thread (inch) Thread (PSI) (PSI) Lenght Hex 1/4″ DC-250-** 1/4 – 18 NPSF 2.44 0.81 1/4 – 18 NPSF 1, 5, 65 5000 1/4″ DC-250-FOFO-** .438 – 20 UNF 2.44 0.81 .438 – 20 UNF 1, 5 5000 3/8″ DC-370-** 3/8 – 18 NPSF 2.75 0.88 3/8 – 18 NPSF 1, 5, 65 3000 3/8″ DC-370-FOFO-** .562 – 18 UNF 2.75 0.88 .562 – 18 UNF 5 3000 1/2″ DC-500-** 1/2 – 14 NPSF 3.5 1.06 1/2 – 14 NPSF 1, 5, 65 3000 1/2″ DC-500-FOFO-** .750 – 16 UNF 3.5 1.06 .750 – 16 UNF 5, 65 3000 3/4″ DC-750-** 3/4 – 14 NPSF 3.88 1.37 3/4 – 14 NPSF 1, 5, 65 3000 3/4″ DC-750-FOFO-** 1.062 – 12 UN 3.88 1.37 1.062 – 12 UN 5, 65 3000 1″ DC-1000-** 1 – 11.5 NPSF 4.88 1.62 1 – 11.5 NPSF 5, 65 3000 1″ DC-1000-FOFO-** 1.312 – 12 UN 4.88 1.62 1.312 – 12 UN 5, 65 3000 1-1/4″ DC-1250-** 1-1/4 – 11.5 NPTF 5.94 2.00 1-1/4 – 11.5 NPTF 5, 65 3000 1-1/4″ DC-1250-FOFO-** 1.625 – 12 UN 5.94 2.00 1.625 – 12 UN 5, 65 3000 1-1/2″ DC-1500-** 1-1/2 – 11.5 NPTF 6.37 2.38 1-1/2 – 11.5 NPTF 5, 65 3000 1-1/2″ DC-1500-FOFO-** 1.875 – 12 UN 6.37 2.38 1.875 – 12 UN 5, 65 3000 2″ DC-2000-** 2 – 11.5 NPTF 7.00 3.00 2 – 11.5 NPTF 5, 65 3000 2″ DC-2000-FOFO-** 2.500 – 12 UN 7.00 3.00 2.500 – 12 UN 65 3000 DC Series Check Valves are Rugged, Cost-competitive The DC Series offers basic, workhorse check valves – ruggedly built, readily available and reasonably priced. They are in-line valves, available in sizes 1⁄4″ to 2″, with a pressure rating range up to 5000 psi, and flow capacities to 300 GPM. DC Series Features 1. All-steel construction–no internal seals or gaskets to wear out. 2. One-piece body eliminates threads and seals that may be potential failure or leakage points. 3. Valve seats resist damage from shocks, surges and contamination. 4. Poppet has an oil retention groove that lubricates the bore and eliminates galling. 5. Poppet spring is isolated from the liquid flow stream, minimizing turbulence. 6. Poppet is heat treated to help prevent damage from shocks, surges and galling. 7. Close tolerance fit between poppet and poppet retainer creates a cushion that protects valve from surge shock damage. 8. Check valve body is shaped like an arrow to indicate flow direction. 9. Available in a variety of standard and non-standard crack pressures. 1. 9. 2. 3. 4. 6. 7. 8. 5. Part Numbers DC Series (1/4″) Test Fluid: Oil – 200 SUS 0 10 20 30 40 50 60 70 80 0 2 4 6 8 10 Flow – USGPM Pressure Drop in PSID 1/4″ DC-250 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 E-13 www.parker.com/quickcouplings Check Valves E Valves DC Series Ordering Information DC Series (3/8″, 1/2″ & 3/4″) Test Fluid: Oil – 200 SUS 0 20 40 60 80 100 120 0 10 20 30 40 50 60 Flow in USGPM Pressure Drop in PSID 3/8″ DC-370 1/2″ DC-500 DC-750 3/4″ DC Series (1″, 1-1/4″, 1-1/2″ & 2″) Test Fluid: Oil – 200 SUS 0 10 20 30 40 50 60 70 80 90 100 110 120 0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 Flow in USGPM Pressure Drop in PSID 1″ DC-1000 1-1/4″ DC-1250 1-1/2″ DC-1500 2″ DC-2000 Flow Data D C – ✱ ✱ ✱ – ✱ ✱ ✱ ✱ – ✱ ✱ Series Fitting Style: Blank = Female pipe inlet to Female pipe outlet FOFO = Female O-ring Boss inlet to Female O-ring Boss outlet Crack Pressure: 1 = 1 PSI 5 = 5 PSI 65 = 65 PSI Other crack pressures up to 100 PSI (in 5 PSI increments) are available. Contact the Division for price and delivery on non-standard crack pressures. Size 250 = 1/4” 370 = 3/8” 500 = 1/2” 750 = 3/4” 1000 = 1” 1250 = 1-1/4” 1500 = 1-1/2” 2000 = 2” Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 E-14 www.parker.com/quickcouplings Check Valves E Valves 2600 Series Low Pressure and Lightweight Constructed of lightweight aluminum, the 2600 Series Swing Check Valve has a spring-loaded, trapdoor style valve. The valve opens when system pressure approaches 1/2 psi to permit full flow with low pressure drop. As system pressure is relieved, the valve closes, retaining fluids upstream. Parker’s 2600 Series are in-line check valves designed especially for diesel and gasoline engine fuel lines. They are also used for externally mounted oil filters, and coolers, as well as transmission fluid lubrication lines. With a maximum of 1/2 psi cracking pressure, these Swing Check Valves are useful in most low pressure air, liquid, or gas systems. Features 1. Lightweight, corrosion-resistant aluminum construction. 2. Available with 1/4” or 3/8” NPTF ports. 3. Standard Nitrile or Fluorocarbon seals. 4. 1/2 PSI maximum crack pressure. 5. Trapdoor style valve permits full flow with low pressure drop. L THREAD THREAD Crack Pressure 1/2 PSI Max Weight 0.08 lbs Temperature Range Nitrile: -40° F to 200°F (-40° C to 93° C) Fluorocarbon: -40° F to 400°F (-40° C to 204° C) Static Burst Pressure 2600 PSI (179 bar) Max Leakage 5 cc / 24 hours at 28” head Specifications Part Dimensions Number Thread Seal Material Hex inch L inch (mm) 2600 1/4 – 18NPTF Nitrile 1-1/16 2.06 (52) 2676 1/4 – 18NPTF Fluorocarbon 1-1/16 2.06 (52) 2650 3/8 – 18NPTF Nitrile 1-1/16 2.12 (54) 2625 3/8 – 18NPTF Fluorocarbon 1-1/16 2.12 (54) Part Numbers Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 E-15 www.parker.com/quickcouplings E Valves Pressure/Vacuum Relief Valves H1 and HM1 Series H1 Series Pressure/Vacuum Relief Valves are used to maintain positive pressure in hydraulic reservoirs. The compact size, reusable bronze filter and high flow characteristics make this valve a popular choice. The HM1 Series offers the same features and characteristics as the H1 series with the option of manual over ride. This feature allows the operator to relieve the reservoir pressure before opening the tank for refilling, inspection or servicing. Features 1. Easy to remove, cleanable bronze filter. 2. High flow characteristics. 3. Compact size. 4. Available with male pipe or male ORB threads. 5. Wide variety of pressure relief settings. 6. HM1 series has a manual pressure relief button. Specifications Note: HM1 Series not shown H1 Series HM1 Series Filter Rating 10 micron, nominal Pressure Relief Setting 5 PSI through 50 PSI (in 5 PSI increments) Vacuum Relief Setting 0.3 PSI Weight 1.0 lbs 1.1 lbs FITTING STYLE: MP = Male pipe thread MO = Male O-ring Boss, SAE threads FITTING SIZE: 6 = 3/8” 8 = 1/2” 12 = 3/4” 16 = 1” SERIES: H1 HM1 (with manual pressure relief button) CRACK PRESSURE (PSI): 5 to 50 (in 5 PSI increments) H ✱ – ✱ ✱ – ✱ ✱ ✱ ✱ Flow Data H1 and HM1 Pressure-Vacuum Relief Valve 0 5 10 15 20 0 10 20 30 40 50 Flow in SCFM Pressure drop is pressure relief valve crack pressure until pressure drop curve increases above pressure relief crack pressure. Pressure Drop in PSID Vacuum Relief Pressure Relief * * Ordering Information Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 E-16 www.parker.com/quickcouplings E Valves Pressure/Vacuum Relief Valves PV Series PV Series is an economical Pressure/Vacuum Relief Valve used to maintain positive pressure in hydraulic reservoirs. The large filter area makes this valve an ideal choice for use in heavily contaminated environments. The optional bayonet type mount allows the valve to be installed in the tank filler port, eliminating the need for an extra port. In this configuration, the valve also serves as a filler cap. Features 1. Disposable spin-on automotive type, field replaceable filter (240 sq inches). 2. Several pressure relief settings. 3. Economic design. 4. Optional bayonet style allows mounting in filler port with valve also functioning as filler cap. Specifications PV Series PV – Bayonet style Filter Rating 10 micron, nominal (240 sq inches) Pressure Relief Setting 5 PSI through 30 PSI 5 and 10 PSI (in 5 PSI increments) Vacuum Relief Setting 0.3 PSI Weight 1.0 lb Mounting Male ORB, SAE threads Bayonet style Male pipe threads with tank receptacle, gaskets & screws (optional strainer basket) Replacement Filter 7312-009 Part Number FITTING SIZE: Blank = Bayonet style 8 = 1/2” 12 = 3/4” PV SERIES FITTING / MOUNTING STYLE: BA = Bayonet mount MP = Male pipe thread MO = Male O-ring Boss, SAE threads CRACK PRESSURE (PSI): 05 (PV, PV-Bayonet) 10 (PV, PV-Bayonet) 15 (PV) 20 (PV) 25 (PV) 30 (PV) BAYONET OPTION ONLY: RO = With receptacle, gaskets and screws RB = With receptacle, gaskets, screws and strainer basket P V- ✱ ✱ – ✱ ✱ ✱ ✱ – ✱ ✱ Flow Data PV Pressure-Vacuum Relief Valve 0 5 10 15 0 10 20 30 40 Flow in SCFM Pressure drop is pressure relief valve crack pressure until pressure drop curve increases above pressure relief crack pressure. Pressure Drop in PSID Vacuum Relief Pressure Relief * * Ordering Information Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 E-18 www.parker.com/quickcouplings E Valves Thermal Bypass Valves TH Series Shift Crack Pressure PSI Temperature 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 100° F (38° C) 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 120° F (49° C) 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 140° F (60° C) 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 160° F (71° C) 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 180° F (82° C) 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 Size 1 inch Weight 2.00 lbs Std Shift Temperatures 100° F (38° C), 120° F (49° C), 140° F (60° C), 160° F (71° C), 180° F (82° C) Full Shift Temperature Shift Temperature plus 25° F (14° C) (cooler port open) Relief Valve Setting Up to 85 PSI (6 bar) in 5 PSI increments Proof Pressure 300 PSI (21 bar) Minimum Burst Pressure Up to full shift temperature: 325 PSI (22 bar) Above full shift temperature: 600 PSI (41 bar) Operating Temperature Min: -30° F (-34° C) Max: Shift temperature plus 75° F (24° C) Max Flow Rate 60 GPM (227 l/m) 1.312 – 12UN – 2B SAE J1926-1-16 SIZE 3 PLACES 5.44 [138.2] 3.51 [89.2] 2.62 [66.5] .42 [10.7] DIA MOUNTING HOLES 2 PLACES CRACK PRESSURE/TEMPERATURE CODE: (see table) PORT SIZE & STYLE: 16FO = 1 inch SAE O-Ring Boss (1.312 -12UN-2B thread) VALVE SERIES: Thermal Bypass VALVE SIZE: 1000 = 1 inch T H – 1 0 0 0 – 1 6 F O – ✱ ✱ Specifications Dimensions Ordering Information Parker Hannifin Corporation Quick Coupling Division Minneapolis, MN 55427 Pneumatic Quick Couplings ……..Section A Introduction ……………………………………………………A-2 Coupling Selection Guide ………………………………..A-4 Interchange Match-up Chart ……………………………A-5 Industrial Interchange Nipples ………………………….A-6 General Purpose ……………………………………………A-8 Special Purpose …………………………………………..A-33 Accessories …………………………………………………A-39 Hydraulic Quick Couplings ……….Section B Introduction …………………………………………………….B-2 Coupling Selection Guide …………………………………B-4 General Purpose……………………………………………..B-5 Non-Spill……………………………………………………….B-20 Connect-Under-Pressure………………………………..B-33 High Pressure ……………………………………………….B-42 Mold Coolant Line ………………………………………….B-46 High Flow ……………………………………………………..B-51 Special Purpose – Miniature…………………………….B-56 Dust Plugs and Caps ……………………………………..B-58 Ordering Information ………………………………………B-61 Promotional Products-Keychains……………………..B-62 Thermoplastic Couplings ………….Section C Coupling Section Guide ……………………………………C-3 PPL/PPM Series ……………………………………………..C-4 PPA Series ……………………………………………………..C-7 Spectrum Series ……………………………………………..C-8 PF Series ……………………………………………………..C-12 Ordering Information………………………………………C-14 Swivels …………………………………….Section D Introduction …………………………………………………….D-2 PS Series ……………………………………………………….D-4 PS Series In-Line Swivels…………………………………D-6 PS Series 90° Swivels ……………………………………D-12 PS Series Repair Kits …………………………………….D-21 S Series Swivels ……………………………………………D-22 S Series Repair Kits……………………………………….D-28 Valves……………………………………….Section E Introduction ……………………………………………………E-2 Features & General Technical Information …………E-4 Check Valves DT Series……………………………………………………E-5 CV Series……………………………………………………E-9 DC Series …………………………………………………E-12 2600 Series……………………………………………….E-14 Thermal Bypass Valves TH Series ………………………………………………….E-17 Pressure/Vacuum Relief Valves H1 Series ………………………………………………….E-15 HM1 Series ……………………………………………….E-15 PV Series………………………………………………….E-16 Diagnostic Products (SensoControl®)…………………………Section F Introduction……………………………………………………..F-2 Selection Guide……………………………………………….F-4 ServiceJunior…………………………………………………..F-5 SensoControl® Serviceman™……………………………F-6 Serviceman™ Accessories ……………………F-18 – F-21 SensoControl® The Service Master™……………….F-10 SensoControl® The Service Master™ Easy……….F-14 The Service Master™ Accessories…………F-18 – F-21 SensoControl® Pressure Transducers……………….F-19 SensoControl® Flow Sensors…………………………..F-20 Test Port Couplings ………………………………………..F-22 Ordering Information ………………………………………F-31 Appendices …………………………………………I-V Fluid Compatibility Chart ………………………………………I Safety Guide ………………………………………………………II Alpha Numeric Index ………………………………………….III Glossary of Terms ……………………………………………..IV Offer of Sale ………………………………………………………V Corporate Overview ……………………Inside Back Cover Quick Coupling Products Table of Contents Appendices F Diagnostic EValves D Swivels CThermoplastics B Hydraulics A Pneumatics F Diagnostic Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 F-1 www.parker.com/quickcouplings Quick Coupling Diagnostic Products Diagnostic Products Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 F-2 www.parker.com/quickcouplings Introduction Increasing productivity and profitability are the key elements for a company to successfully compete in the world market today. Reduced machine downtime during initial set-up, trouble shooting and maintenance procedures means increased productivity for you. That’s why Parker provides the most complete line of hydraulic and pneumatic diagnostic equipment available today. With Parker diagnostic equipment you can take critical measurements from your system with just a push of a button. Parker diagnostic instruments are designed to identify hard-to detect variations and peaks in pressures, temperatures and flow. Parker diagnostic quick couplings and nipples allow quick and easy access into hydraulic or pneumatic systems at remote test points without the use of tools. Diagnostic nipples can be permanently installed in threaded test ports in hydraulic components such as valves, cylinders, accumulators, filters or pumps. Diagnostic tube ends, used in conjunction with a 37° flare, bite type, or O-ring face seal tube fitting, will allow you to take pressure readings in your systems tubing and hose lines where threaded test ports may not currently be available. From diagnostic nipples to digital monitoring equipment, Parker can provide the tools necessary to increase your productivity through reduced machine downtime. Diagnostic Products Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 F-3 www.parker.com/quickcouplings F Diagnostic Table of Contents Introduction …………………………………………………….F-2 Table of Contents……………………………………………..F-3 Product Selection Guide…………………………………..F-4 The ServiceJunior™…………………………………………F-5 The SensoControl® Serviceman™ General …………………………………………………………..F-6 Schematic……………………………………………………….F-7 Technical Data …………………………………………………F-8 Test Meter Kits …………………………………………………F-9 Components and Accessories………………..F-18 – F-21 The SensoControl® Service Master General …………………………………………………………F-10 Schematic……………………………………………………..F-11 Technical Data ……………………………………………….F-12 Test Meter Kits ……………………………………………… F-13 Components and Accessories………………..F-18 – F-21 The SensoControl® Service Master Easy General …………………………………………………………F-14 Schematic……………………………………………………..F-15 Technical Data ……………………………………………….F-16 Test Meter Kits ……………………………………………… F-17 Components and Accessories………………..F-18 – F-21 SensoControl Pressure Transducers …………….. F-19 SensoControl Flow Sensors……………………………F-20 Test Port Couplings PD Series…………………………………………….F-22 – F-24 Dust Cap……………………………………………………..F-22 Couplers ……………………………………………………..F-23 Nipples ………………………………………………F-23 – F-24 Tube End Nipples …………………………………………F-24 PDP Series ………………………………………….F-25 – F-26 Dust Cap……………………………………………………..F-25 Couplers ……………………………………………………..F-25 Nipples………………………………………………………..F-26 EMA3 Series………………………………………………….F-27 Nipples………………………………………………………..F-27 Gauge Adapter & Union ………………………………..F-28 Transducer Adapters……………………………………….F-29 Flexible Hose …………………………………………………F-29 PDFS Series – Fluid Sampling………………………….F-30 Couplers ……………………………………………………..F-30 Nipples………………………………………………………..F-30 Ordering Information………………………………………F-31 Diagnostic Products Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 F-4 www.parker.com/quickcouplings F Diagnostic Meter Selection Guide Product Selection Guide Test Port Coupling Selection Guide Note: See the Specifications Table for PD and PDP Series for more information. Valving Body Material* Locking Std. Seal Temp Rated Size Br SS S P Mechanism Material Range** Pressure Test Port PD Series Flush Face 1/8″ • • • Ball Nitrile -40° to +250° F 6000 PSI PDP Series Ball 1/8″ • Ball Nitrile -40° to +250° F 6000 PSI EMA3 Series Poppet 1/8″ • • Threads Nitrile/Fluorocarbon -15° to +250° F 9000 PSI * See Fluid Compatibility chart and/or consult factory for questions regarding proper material for specific applications. CODE: Br = Brass; SS = Stainless Steel; S = Steel; P = Plastic **Temperature Range for standard seal material. The Parker The Parker The Parker The Parker Function ServiceJunior Serviceman Service Master 450 Service Master Easy 340 Pressure Sensing • • • • Flow Sensing •1 •1 •1 Temperature Sensing •1 •2 •2 Rotational Speed Sensing •1 •1 •1 Auxiliary Sensing •1 •1 Pressure Differential • • • Automatic Sensor Recognition • • • • Auto Power Off • • • • Battery Monitoring • • • • Battery Type AA (2 req’d) Rechargeable Ni-MH Rechargeable Ni-Cad Rechargeable Ni-MH PC Compatible (Windows) •1 •1 •1 Minimum/Maximum Memory • • • • Self Contained Memory • • On-Line Data Transfer • • • Text Display (Lines) 2 2 8 8 Inputs 1 2 6 4 Data Points (Maximum in Memory) 250,000 1,000,000 Graphic LCD Display • • • Hydraulic Power Calculations • • Volume Calculations • • Notes: (1) Additional accessories are required to perform this function. (2) Transducers provide an ambient temperature signal, but additional temperature probes are required for more accurate temperature measurements. Diagnostic Products Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 F-5 www.parker.com/quickcouplings F Diagnostic The SensoControl ServiceJunior™ Technical Data ® The new Parker ServiceJunior captures momentary pressure spikes that are “invisible” to normal liquid-filled gauges. That means the maximum pressure reading it delivers can be trusted as a much truer reflection of the system’s actual condition; so you can identify potential problems better and diagnose their causes faster. All readings are accurate to within +/-0.5%. Measuring ServiceJunior ServiceJunior ServiceJunior Overload Range with PD Coupler with EMA3 Coupler with 1/4″ NPT Port Pressure Resolution -14.5 to 250 PSI (-1 to 16 bar) SCJR-0250-PD SCJR-0250-EMA SCJR-0250-4MP 580 PSI 0.1 PSI 0 to 1500 PSI (0 to 100 bar) SCJR-1500-PD SCJR-1500-EMA SCJR-1500-4MP 2,900 PSI 1 PSI 0 to 5800 PSI (0 to 400 bar) SCJR-5800-PD SCJR-5800-EMA SCJR-5800-4MP 11,600 PSI 1 PSI 0 to 8700 PSI (0 to 600 bar) SCJR-8700-PD1 SCJR-8700-EMA2 SCJR-8700-4MP 17,400 PSI 1 PSI NOTES: 1. PD Couplers rated to 6,000 PSI max. 2. EMA3 Couplers rated to 9,000 PSI max. Accessories Part Number Description PD240 PD Series diagnostic coupler SCA-7/16-EMA-3 7/16 -18UNF-2B female to M16X2.0 EMA3 female swivel SCJA-1/4 7/16 -18UNF-2B female to 1/4″ NPT male adapter PDH-19 19″ PD Hose extension to be used with PD nipple interface SMA3-400 16” hose assembly for EMA M16X2.0 interface SCC-110 Storage case for one gauge and diagnostic adapters SCC-150 Storage case for two gauges and diagnostic adapters • Easy to connect and test system pressure using Parker Diagnostic test port couplings • Robust, dirt resistant housing • Simple to operate, four key menu • Four digit backlit display with easy to read large 0.60″ characters • Minimum and maximum graphic display shows pressure peak • Power status displayed continuously • Can be used with most hydraulic and pneumatic media • Measure PSI, bar, mPa, kPa with one gauge • Accuracy +/- 0.5% of full scale • Four pressure ranges • Operating temperature 14° to 122º F • Fluid temperature -4° to 176º F • Storage temperature -4° to 140º F • Auto power off after 5 minutes or “constant on” at the touch of a button • Zero adjustment function • 10 msec scanning rate • Ratings: Environmental Protection: EN60529 (IP 65) Vibration: IEC 60068-2-6/10 – 500Hz: 20g Shock: IEC 60068-2-29/50g 11 msec ServiceJunior Features Diagnostic Products Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 F-6 www.parker.com/quickcouplings F Diagnostic The SensoControl® Serviceman™ General Hand-held Diagnostic Meter to Measure Pressure, Temperature, Flow and Rotational Speed for Hydraulic and Pneumatic Systems • Easy operation • Rugged design • Compact Dimensions • Two line display • Auto sensor recognition • MIN/MAX Memory • Pressure differential • External power supply • Data output for PC The Serviceman field kit is the ideal set of diagnostic tools for maintenance and service personnel in the industrial, mobile and agricultural markets. These units help reduce downtime by recording the best preventative maintenance and diagnostic data available. Parker Hannifin provides the most complete line of hydraulic and pneumatic diagnostic equipment available today. For more information contact the Quick Coupling Division or your local distributor. The Serviceman SCM-152 from Parker is a portable diagnostic measuring system – an excellent alternative to conventional mechanical pressure gages – a very rugged, durable test meter that can withstand even the most demanding environmental conditions. The Serviceman meter uses the latest in sensor recognition technology which eliminates the need for meter adjustment. It’s powered by a rechargeable Ni-MH battery system or a 120 volt external power supply for continuous operation Using Serviceman software (compatible with Windows 98 and newer operating systems) the SCM-152 quickly interfaces with an Excel spread sheet. Diagnostic Products Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 F-7 www.parker.com/quickcouplings F Diagnostic The SensoControl® Serviceman™ Schematic Meter SCM–152-2-02 PC Computer Adapter Software kit SCSW-KIT-152 ON/OFF RESET MAX MIN ZERO INP1/2 PRINT Serviceman SCM-152 INPT1 INPT2 RS232 Connector 1-2 M10 x 1 Tachometer SCRPM–220 Temperature Sensor SCT-150-04-02 Adapter SCTA-1/4 Pressure Transducer PD XXXX-XXXX Diagnostic Coupler M10 X 1 To 1/4 NPTF Flow Sensor SCFT-XXXX-XX Cable SCK-102-03-02 Diagnostic Nipple Temperature Sensor Port M10 X 1 Cable SCK-102-03-02 Cable SCK-102-03-02 SensoControl SCSN-450 Meter Power Supply / Recharger SCSN-450 INP1 PSI INP2 GPM Diagnostic Products Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 F-8 www.parker.com/quickcouplings F Diagnostic The SensoControl® Serviceman™ Technical Data Function Descriptions Serviceman Technical Data 1 Two Line Measurement Display 2 RESET resets minimum and maximum values to zero 3 ON/OFF Switch 4 MAX displays maximum value since meter was last reset or turned on 5 INP1/2 selects whether meter will display measurement from Input 1 or Input 2 6 l1-l2 displays the differential value of Input 1 minus Input 2 7 MIN displays minimum value since meter was last reset or turned on 8 PRINT sends displayed measurements to PC or printer 9 HOLD resets display to zero 10 Two Inputs (5 pin) 11 External Power Supply Socket 12 Data Output via RS232 interface to transmit measured values to PC ON/OFF RESET MAX MIN ZERO INP1/2 1-2 PRINT INP1 PSI INP2 GPM Serviceman SCM-152 INPT1 INPT2 10 9 8 7 6 5 4 3 2 1 11 12 Meter • 2 Line Display Shows Both Inputs • 4 Digit LCD Text Display • Display of Pressure, Temperature, Flow and Rotational Speed – Pressure in PSI and Bar – Temperature in °F and °C – Flow in GPM and l/min. – Rotational Speed in RPM Housing • ABS Plastic Housing • Protective Rubber Cover • Carrying Strap • Integral Stand Inputs • Two 5-pin push-pull Inputs • 0-3 Volts (R=470 kΩ) • 12 Bit A/D Converter • Automatic Sensor Recognition • 2 ms Scanning Rate Ambient Conditions • Operating Temperatures 32°F to 122°F (0°C to 50°C) • Storage Temperatures -4°F to 140°F (-20°C to 60°C) Output • RS232 Interface to transfer measured values to a PC. The SCSW-KIT-152 software and adapter kit is required for data transfer to a PC. Power Requirements • 9 Volt Rechargeable Ni-MH Battery • Recharge circuit for use with external power supply. • 5 Hour Battery Life Diagnostic Products Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 F-9 www.parker.com/quickcouplings F Diagnostic The SensoControl® Serviceman™ Test Meter Kits Test Meter Kits CODE DESCRIPTION 2 PD Style 4 PDP Style 6 EMA3 Style (Female) Transducer Pressure Range (Choose one or two) Diagnostic Style Code for Ordering Separately: SCFT-XXXX – XXX CODE DESCRIPTION PD PD Style PDP PDP Style EMA EMA Style Flow Range CODE FLOW RATE 0004 0.2 – 4 GPM (1 – 15 l/min) 0116 1 – 16 GPM (4 – 60 l/min) 0380 3 – 80 GPM (10 – 300 l/min) 5160 5 – 160 GPM (20 – 600 l/min) Diagnostic Style Additional Transducers Flow Sensors Code for Ordering Separately: PD XXXXXX – XXXX CODE DESCRIPTION TA PD Style PTA PDP Style TEMA3 EMA3 Style (Female) Diagnostic Style CODE PRESSURE COLOR 0100 -14.5 – +235 PSI Blue 0600 0 – 870 PSI Green 1500 0 – 2175 PSI Yellow 4000 0 – 5800 PSI Orange 6000 0 – 8700 PSI Red Pressure Range Kit Contents: Case . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SCC-150 Serviceman Meter . . . . . . . . . . . . . . . . . . .SCM-152-2-02 Transducers (Quantity 1 or 2) . . . . . . . . . .(See Below) Cable (Quantity 1 or 2) . . . . . . . . . . . . . . .SCK-102-03-02 Power Supply – Meter* . . . . . . . . . . . . . . .SCSN-450 Instruction Manual* . . . . . . . . . . . . . . . . . .SCM-152-TM * Included with Serviceman Meter Code for Ordering Serviceman Meter Kits: PDS3 – X – XX – XX CODE PRESSURE COLOR 01 -14.5 – +235 PSI Blue 06 0 – 870 PSI Green 15 0 – 2175 PSI Yellow 40 0 – 5800 PSI Orange 60 0 – 8700 PSI Red Diagnostic Products Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 F-10 www.parker.com/quickcouplings F Diagnostic The SensoControl® Service Master 450 General Hand-held Diagnostic Meter to Measure Pressure, Temperature, Flow and Rotational Speed for Hydraulic and Pneumatic Systems • Easy operation • Rugged design • Large display • Auto sensor recognition • MIN/MAX Memory • On-line operation • Multiple sensor inputs • Battery monitoring As with all SensoControl equipment, the Parker Service Master offers the latest in sensor recognition technology, eliminating the need for individual sensor setup. It also allows you to program the individual inputs to accept other data collection formats, such as 4-20 ma, or 0-10 Volt. Parker Hannifin provides the most complete line of hydraulic and pneumatic diagnostic equipment available today. For more information contact the Quick Coupling DIvision or your local distributor. The Parker Service Master meter is a state-of-the-art instrument with six channels for data collection. The ergonomically designed case and large automatic scaling LCD display make it very easy to use in even the most demanding environments. They are the perfect tool to capture diagnostic measurements at remote locations. Able to measure pressure, temperature, flow and rotational speed simultaneously, the data can be gathered and stored on a PC for later analysis. The SCM-450 provides 250,000 data points of storage. These measurements can easily be transferred to your PC via an RS232 interface and SensoWin™ 4.03 software which is compatible with Windows98 and newer operating systems. Diagnostic Products Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 F-11 www.parker.com/quickcouplings F Diagnostic The SensoControl® Service Master 450 Schematic SensoControl SCSN-450 ON/OFF STOP ESC START ENTER DATA OUTPUT SETUP OPTION RECORD TEMP |1 – |2 |1 = |2 MIN/MAX ACTUAL RESET M10 x 1 Tachometer SCRPM–220 Meter SCM-450-1-01 Meter Power Supply / Recharger SCSN-450 The SensoControl® Service Master Measure and Document Flow, Pressure, Voltage, Current, Temperature and Rotation Speed Cable SCK-313-02-31 Temperature Sensor SCT-150-04-02 Adapter SCTA-1/4 Connect To Serial Port On A PC With SCSW-400 Software Pressure Transducer PD XXXX-XXXX Diagnostic Coupler M10 X 1 To 1/4 NPTF The Service Master Flow Sensor SCFT-XXXX-XX Cable SCK-102-03-02 Diagnostic Nipple Temperature Sensor Port M10 X 1 Cable SCK-102-03-02 Cable SCK-102-03-02 Diagnostic Products Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 F-12 www.parker.com/quickcouplings F Diagnostic The SensoControl® Service Master 450 Technical Data Meter • Digital LCD Text Display – 128×64 pixels • Automatic Character Height Scaling • Display of Pressure, Temperature, Flow and Rotational Speed – Pressure in PSI and Bar – Temperature in °F and °C – Flow in GPM and l/min. – Rotational Speed in RPM Inputs • Six, 5-pin push-pull style connectors • Automatic Sensor Recognition • 0-3 Volts (R=470 kΩ) • 12 Bit A/D Converter • 1 ms Scanning Rate (1-3 inputs) • 2 ms Scanning Rate (4-6 inputs) Functions • Differential Value Measurement • MIN/MAX Memory • Online data transfer • Battery level indicator • Power calculation (display only) • Flow run-out (display only) • Auto power off Output • RS232 interface • Adjustable baud rate up to 38400 BPS • 8 data bits, 1 stop bit Power Requirements • Internal 7.2-volt rechargeable Ni-Cad battery • Recharge circuit for use with external power supply. • Operating time (Aprox. 5 hours) • Excitation voltage (12-30 VDC) Memory Functions • Memory capacity 250,000 data points • Memory used in 25,000 data point intervals • Variable storage rate • Variable measuring period up to 100 hours • Manual and automatic triggering Ambient Conditions • Operating Temperatures 32°F to 122°F (0°C to 50°C) • Storage Temperatures -4°F to 140°F (-20°C to 60°C) • Protection class IP54 Housing • Glass reinforced polyamide • 11-Key tactile touch membrane • EMC Protection – Electromagnetic interference (DIN/EN 50081, Part 1) – Immunity to emitted interference (DIN/EN 50082, Part 2) Dimensions • Length/Height/Width – 9.25 x 4.19 x 2.09 – (235 x 106 x 52 mm) Weight • 1.2 lbs (700 grams) Function Descriptions 1 ON/OFF Turns meter on or off 2 SETUP/OPTION Change system settings 3/4 ARROWS Select line and function values 5 START/ENTER Change function values and start measurements 6 STOP/ESC Stop or terminate functions 7 I1-I2 Differential value between input 1 and input 2. 8 TEMP Displays the measured temperature values for all channels 9 DATA-OUTPUT Displays output to PC, printer or graphic display 10 RECORD To record and store measurements 11 MIN/MAX/ACTUAL Displays the minimum, maximum and actual values. Reset deletes values 12 INPUTS Inputs for up to (6) sensors 13 11-30 VDC Input for external power supply and charging of internal battery 14 DATA OUTPUT RS232 port for connecting to the PC, printer, or external trigger module 15 GRAPHIC LCD Displays measured values, adjustment menus and graphics. 16 ADDITIONAL LINE Displays the power or flow runout values. 17 STATUS LINE Shows the designation of the measured value or the menu name. ON/OFF STOP ESC START ENTER DATA OUTPUT SETUP OPTION RECORD TEMP |1 – |2 |1 = |2 MIN/MAX ACTUAL RESET The Service Master 5 10 3 2 11 7 6 9 1 13 16 15 17 14 12 4 8 Technical Data Diagnostic Products Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 F-13 www.parker.com/quickcouplings F Diagnostic The SensoControl® Service Master 450 Test Meter Kits Test Meter Kits The Parker Kit Contents: Service Master 450 Meter Kit Case SC-690 The Parker Service Master Meter SCM-450-1-01 Transducers (Quantity 2) (See Below) Transducer Cable, 10’ (Quantity 2) SCK-102-03-02 Power Supply – Meter* SCSN-450 SensoWin Software 4.03 SC-CD 4082 Computer Interface Cable SCK-313-02-31 Operating Manual* * Included with the Parker Service Master Meter Code for Ordering the Parker Service Master Meter Kits: PDSM 45 – X – XX – XX CODE PRESSURE COLOR 01 -14.5 – +235 PSI Blue 06 0 – 870 PSI Green 15 0 – 2175 PSI Yellow 40 0 – 5800 PSI Orange 60 0 – 8700 PSI Red CODE DESCRIPTION 45 The Parker Service Master 450 Meter CODE DESCRIPTION 2 PD Style 4 PDP Style 6 EMA3 Style (Female) Transducer Pressure Range (Choose two) Diagnostic Style Meter Style Code for Ordering Separately: SCFT-XXXX – XXX CODE DESCRIPTION PD PD Style PDP PDP Style EMA EMA Style Flow Range CODE FLOW RATE 0004 0.2 – 4 GPM (1 – 15 l/min) 0116 1 – 16 GPM (4 – 60 l/min) 0380 3 – 80 GPM (10 – 300 l/min) 5160 5 – 160 GPM (20 – 600 l/min) Diagnostic Style Additional Transducers Flow Sensors Code for Ordering Separately: PD XXXXXX – XXXX CODE DESCRIPTION TA PD Style PTA PDP Style TEMA3 EMA3 Style (Female) Diagnostic Style CODE PRESSURE COLOR 0100 -14.5 – +235 PSI Blue 0600 0 – 870 PSI Green 1500 0 – 2175 PSI Yellow 4000 0 – 5800 PSI Orange 6000 0 – 8700 PSI Red Pressure Range Diagnostic Products Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 F-14 www.parker.com/quickcouplings F Diagnostic Model SCM-340-2-02 Features: • Ideal for both hydraulic and pneumatic systems • Easy, intuitive operation • Large legible display • Auto sensor recognition • MIN/MAX Memory • Multiple sensor inputs • Battery monitoring • Plug and Play Software Recognition • Simultaneous Multi-line Display On site data storage – has never been easier or as powerful. The 0.25 ms scanning rate catches even the most instantaneous pressure spikes, flow surges and temperature changes. Up to one million data points can be stored in memory or downloaded to a PC. Fast measuring and analysis capability coupled with a more efficient and user-friendly interface. This multi-channel instrument offers accuracy, expanded memory and intuitive performance to meet your most demanding expectations. Offering the latest in sensor recognition technology, the Parker Service Master Easy gives you the ability to measure and store data relating to pressure, flow, temperature and rotational speed simultaneously, or switch between them with ease. The Parker Service Master Easy General Diagnostic Products Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 F-15 www.parker.com/quickcouplings F Diagnostic M10 x 1 Tachometer SCRPM–220 Meter SCM-340-2-02 Meter Power Supply / Recharger SCSN-450 Cable SCK-315-02-34 Temperature Sensor SCT-150-04-02 Adapter SCTA-1/4 Connect to USB Port on a PC with SC-CD 4082 Software Pressure Transducer PD XXXX-XXXX Diagnostic Coupler M10 X 1 To 1/4 NPTF SensoControl SCSN-450 ON/OFF OK DISP ESC REC LINE STOP MEM ZERO RESET MIN/MAX The ServiceMaster IN1=IN2 SET 11-30VD I 1 I 2 I 3 I 4 PC Flow Sensor SCFT-XXXX-XX Cable SCK-102-03-02 Diagnostic Nipple Temperature Sensor Port M10 X 1 Cable SCK-102-03-02 Cable SCK-102-03-02 The Parker Service Master Easy Measure and Document Flow, Pressure, Voltage, Current, Temperature and Rotation Speed The Parker Service Master Easy Schematic Diagnostic Products Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 F-16 www.parker.com/quickcouplings F Diagnostic The Parker Service Master Easy Technical Data ON/OFF OK DISP ESC REC LINE STOP MEM ZERO RESET MIN/MAX The ServiceMaster IN1=IN2 SET 11-30VD I 1 I 2 I 3 I 4 PC 8 9 10 11 12 13 1 2 3 4 5 6 7 Meter • Digital LCD Text Display – 128×64 pixels – 72×40 mm screen • Character Height 6 mm • Display of Pressure, Temperature, Flow and Rotational Speed – Pressure in PSI and Bar – Temperature in °F and °C – Flow in GPM and l/min. – Rotational Speed in RPM Inputs • Four 5-pin push-pull style connectors • Automatic Sensor Recognition for pressure, temperature, flow and rpm • 12 Bit A/D Converter (4096 steps) • Selectable scanning rate in 1 ms intervals • Burst Mode 0.25 ms (input 1 only) Functions • Differential Value Measurement • MIN/MAX Memory • On line data transfer • Battery level indicator • Power calculation (display only) • Flow run-out (display only) • Auto power off Output • USB 2.0 interface Power Requirements • Internal rechargeable Ni-MH battery • Recharge circuit for use with external power supply. • Operating time – 8 hours • Charge time – 3 hours • Excitation voltage (12-30 VDC) Memory Functions • Memory capacity – 1,000,000 data points max – 250,000 points per curve • Variable measuring period up to 100 hours • Manual and automatic triggering Ambient Conditions • Operating Temperatures 32°F to 122°F (0°C to 50°C) • Storage Temperatures -4°F to 140°F (-20°C to 60°C) • Protection class IP54 Housing • Glass reinforced polyamide • 12-Key tactile touch membrane • EMC Protection – Electromagnetic interference (DIN/EN 50081, Part 1) – Immunity to emitted interference (DIN/EN 50082, Part 2) Dimensions • Length/Height/Width – 9.25 x 4.19 x 2.09 – (235 x 106 x 52 mm) Weight • 1.2 lbs (700 grams) Technical Data Function Descriptions 1 11–30 VDC Power Supply Connection 2 ON/OFF Meter On and Off 3 REC Record Measured Values 4 OKConfirms Function or Value 5 MEM/SET Memory Configuration/Main Menu (device settings) 6 RESET MIN/MAX Delete Min/Max Values 7 I1 – I4 Sensor Input Ports 8 Meter – PC Connection for USB Cable 9 Meter Display 128 x 64 Pixel Display 10 Zero/IN1=IN2 Zero or Offset an Input / Set IN1 Equal to IN2 11 STOP/ESC Stop or Terminate Functions 12 ARROWS Select Line and Function Values 13 DISPLAY/LINE Min/Max/Actual or %FS Display Diagnostic Products Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 F-17 www.parker.com/quickcouplings F Diagnostic The Parker Service Master Easy Test Meter Kits The Parker Service Master Easy 340 Test Meter Kit Includes: The Case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SC-690 The Parker Service Master Easy Meter . . . . . . . . . . . . .SCM-340-2-02 2 Transducers (see ordering Information below) 2 Transducer Cables (10 Ft.) . . . . . . . . . . . . .SCK-102-03-02 Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . .SCSN-450 SensoWin Software 6.0 . . . . . . . . . . . . . . . . . . .SC-CD 4082 Usb Computer Cable . . . . . . . . . . . . . . . . . . .SCK-315-02-34 Operating Manual (incl. with the Parker Service Master Easy Meter) CODE PRESSURE COLOR 01 -14.5 – +235 PSI Blue 06 0 – 870 PSI Green 15 0 – 2175 PSI Yellow 40 0 – 5800 PSI Orange 60 0 – 8700 PSI Red CODE DESCRIPTION 45 The Parker Service Master 340 Meter CODE DESCRIPTION 2 PD Style 4 PDP Style 6 EMA3 Style (Female) Diagnostic Style Meter Style Code for Ordering Separately: SCFT-XXXX – XXX CODE DESCRIPTION PD PD Style PDP PDP Style EMA EMA Style Flow Range CODE FLOW RATE 0004 0.2 – 4 GPM (1 – 15 l/min) 0116 1 – 16 GPM (4 – 60 l/min) 0380 3 – 80 GPM (10 – 300 l/min) 5160 5 – 160 GPM (20 – 600 l/min) Diagnostic Style Additional Transducers Flow Sensors Code for Ordering Separately: PD XXXXXX – XXXX CODE DESCRIPTION TA PD Style PTA PDP Style TEMA3 EMA3 Style (Female) Diagnostic Style CODE PRESSURE COLOR 0100 -14.5 – +235 PSI Blue 0600 0 – 870 PSI Green 1500 0 – 2175 PSI Yellow 4000 0 – 5800 PSI Orange 6000 0 – 8700 PSI Red Pressure Range Code for Ordering the Parker Service Master Easy Meter Kits: PDSM XX – X – XX – XX Diagnostic Products Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 F-18 www.parker.com/quickcouplings F Diagnostic F Diagnostic The SensoControl® Serviceman™/Service Master and The Parker Service Master Easy Components and Accessories Overview Chart The Parker The Parker The Parker Serviceman Service Master Service Master Description Easy Part Number Serviceman Hand-held meter, 2 inputs (Includes SCSN-450 Power Supply) • SCM-152-2-02 The Parker Service Master Hand-held meter, 6 inputs, 250,000 data points (Includes SCSN-450 Power Supply) • SCM-450-1-01 The Parker Service Master Easy Hand-held meter, 4 inputs, 1,000,000 data points (Includes SCSN-450 Power Supply) • SCM-340-2-02 Storage Case • SCC-150 Storage Case • • SC-690 Power Supply 120 Volt AC • • • SCSN-450 Connection Cable Used between meter and sensors (3m length) • • • SCK-102-03-02 Extension Cable Used in series with connection cables (5m length) • • • SCK-102-05-12 Pressure Transducers Five measurement ranges • • • See page F-19 Flow Sensors Four measurement ranges • • • See page F-20 Temperature Sensor Used with Parker Flow Sensors or SCTA-1/4 Port Adapter (Requires standard connection cable) • • • SCT-150-04-02 Port Adapter Converts M10X1 to 1/4” male NPT thread • • • SCTA-1/4 Tachometer To measure rotational speed (0 to 10,000 RPM) • • • SCRPM-220 Contact Adapter For SCRPM-220 Tachometer • • • SCRPMA-001 Focus Adapter For SCRPM-220 Tachometer • • • SCRPMA-002 Diagnostic Test Hose Assembly Used with PD style Parker Transducers and diagnostic nipples • • • PDH-19 Voltage Adapter Used with auxiliary sensors • • SCMA-VADC-600 Data Cable and Software To connect the Serviceman meter to a PC • SCSW-KIT-152 SensoWin 4.03 & 6.0 Software For data transfer from all Parker Service Master meters to a PC • • SC-CD 4082 Data Cable Used between the Parker Service Master 450 meter and a PC • SCK-313-02-31 Data Cable Used between the Parker Service Master Easy meter and a PC • SCK-315-02-34 Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 F-19 www.parker.com/quickcouplings F Diagnostic Special Note: All Parker SensoControl hand-held diagnostic meters are now equipped with the same 5-pin push-pull style connector ports. Accessories such as pressure sensors, temperature sensors, flow meters, tachometers and cables are all interchangeable between Serviceman and the Parker Service Master meters. Pressure Transducer Options Materials of Construction Transducer . . . . . . . . . . . .Stainless steel Diaphragm . . . . . . . . . . . .Stainless steel Coupler . .Chromium-6 Free Plated steel Seal . . . . . . . . . . . . . . . . . .Fluorocarbon Temperature Range Working . . . . . . . . . . . . . . . .-4° to 185° Fluid . . . . . . . . . . . . . . . . . .-13° to 221° Storage . . . . . . . . . . . . . . . .-40° to 257° Output Accuracy . . . . . . . . . . . . . . . . .0.5% FS Load . . . . . . . . . . . . . . . . . . . .2m ohms Response time . . . . . . . . . . . . . . .<1 ms Output signal to noise . . . . . . . .0.1%FS Resonant frequency . . . . . . . . .100 KHz Voltage Requirement 7 to 12 VDC excitation voltage Permissible ripple . . . . . . . . . . . .±2% ss Current requirement . . . . . . . . . . . .5 mA Transducer Technical Data PD -0100 PD -0600 PD -1500 PD -4000 PD -6000 Measuring Range (Pressure) -14.5 to 235 PSI 0 to 870 PSI 0 to 2175 PSI 0 to 5800 PSI 0 to 8700(1) PSI Color Code Blue Green Yellow Orange Red Measuring Range (Temp.) -13°F to 221°F -13°F to 221°F -13°F to 221°F -13°F to 221°F -13°F to 221°F Max. Overload Pressure 290 PSI 1450 PSI 3625 PSI 14500 PSI 14500 PSI Output Signal (Volts) -0.2 to 2 0 to 3 0 to 3 0 to 3 0 to 3 Hysteresis (% FS Typical) 0.1 0.05 0.1 0.08 0.05 Repeatability (%FS Typical) 0.08 0.13 0.13 0.1 0.1 Non-conformity (%FS) 0.25 0.2 0.2 0.28 0.25 Response Time 1 ms 1 ms 1 ms 1 ms 1 ms Excitation Voltage 7-12 VDC 7-12 VDC 7-12 VDC 7-12 VDC 7-12 VDC (1) Maximum Rated Pressure for PD Series Couplers is 6000 PSI. (2) Maximum Rated Pressure for EMA Series Couplers is 9000 PSI. Pin Mark Wire Colors 1 P yellow 2 T white 3 + brown 4 – green 5 SK grey Cable End (Pin Out) • Five measurement ranges: Vacuum to 8,750 PSI • Color coded for easy identification • Corrosion resistant stainless steel housing • Accuracy of .5% Full Scale (FS) • Available with PD, PDP or EMA style diagnostic couplings Diagnostic Products “ ” in the Part Number Represents: TA = PD Style PTA = PDP Style TEMA3 = EMA3 Style (Female) The SensoControl® Serviceman™/Service Master and The Parker Service Master Easy Components and Accessories – Transducers Diagnostic Products Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 F-20 www.parker.com/quickcouplings F Diagnostic These flow sensors are a compact light-weight aluminum diagnostic tool capable of measuring pressure, temperature and flow from a single test point in a hydraulic system. These flow sensors are designed to be used with a wide variety of hydraulic fluids. This design also minimizes the effect of viscosity changes. These units are manufactured from solid aluminum bar stock and are rated to 6000 PSI* and temperatures of 0°F to +350°F. They are available in four sizes with flow measuring ranges from 0.2 – 160 GPM. Flow sensors are provided with a choice of PD, PDP or EMA style diagnostic ports and are designed to be used with Serviceman™ and the Parker Service Master equipment. Measuring Flow Sensor Flow Sensor Flow Sensor Inlet/Outlet Port Length Height Width Range with PD Nipple with PDP Nipple with EMA Nipple Configuration inches inches inches 0.2 – 4 GPM (1 – 15 l/min) SCFT-0004-PD SCFT-0004-PDP SCFT-0004-EMA 3/4-16 ORB 5.35 4.61 1.46 1 – 16 GPM (4 – 60 l/min) SCFT-0116-PD SCFT-0116-PDP SCFT-0116-EMA 1 1/16-12 ORB 7.48 5.12 2.44 3 – 80 GPM (10 – 300 l/min) SCFT-0380-PD SCFT-0380-PDP SCFT-0380-EMA 1 5/16-12 ORB 7.48 5.28 2.44 5 – 160 GPM (20 – 600 l/min) SCFT-5160-PD SCFT-5160-PDP SCFT-5160-EMA 1 5/8-12 ORB 8.35 5.91 2.44 How to Order Material Specifications Flow Block . . . . . . . . . . . . . . . . . . . . Anodized Aluminum Turbine . . . . . . . . . . . . . . . . . . . . . . . . . . . Stainless Steel Bearings . . . . . . . . . . . . . . . . . . . . . . . . . .Stainless Steel Seal Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Nitrile Electrical Connection . . . . . . . . . . . .5 Pin Push-Pull Style Pressure Rating* . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6000 PSI * SCFT–7160 is rated to 5000 PSI Fluid Temperature Range . . . . . . . . . . . . . . . . . . .0°F to +350°F Ambient Temperature Range . . . . . . . . . . . . . . . .0°F to +120°F Media/Compatibility . . . . . . . . . . . . . . .Petroleum Based Fluids (Contact factory for use with water based hydraulic fluids) Flow Measurement Accuracy . . . . . . . . .±1.0% Actual Reading Voltage Input . . . . . . . . . . . . . . . . . . . . . . . . . . . .+7 to 12 VDC (Supplied by SensoControl meter) Current Requirement . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6mA Response Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 ms Viscosity Range . . . . . . . . . . . . . . . . . . . . . . . . . . .11 to 50 cSt Flow Sensors Technical Data The SensoControl® Serviceman™/Service Master and The Parker Service Master Easy Components and Accessories – Flow Sensors Diagnostic Products Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 F-21 www.parker.com/quickcouplings F Diagnostic SensoWIN™ 4.03 & 6.0 Software for data transfer from all Parker Service Master 450 and Easy Meters to a PC (Windows 98 and newer). Part Number SC-CD 4082 Temperature Sensor for Serviceman and the Parker Service Master. Can be used with Parker flow sensors or with an SCTA-1/4 port adapter. Accuracy: +– 1.5% Full scale Temperature range: -13°F to 257°F (-25°C to 125°C) Part Number SCT-150-04-02 5 pin to 5 pin Cables Flow sensor, transducer and temperature probe cables for both Serviceman and the Parker Service Master. Length Part Number 10 ft (3 m) SCK-102-03-02 Extension Cable 16.4 ft (5 m) SCK-102-05-12 Voltage Adapter for use with Auxiliary Sensors to the Parker Service Master. Input: 0 - 20 MA or 0 - 10 VDC Accuracy: 0.25% FS Part Number SCMA-VADC-600 Tachometer Adapters Contact Adapter for belt drive/wheel. Part Number SCRPMA-001 Focus Adapter for confined areas. Part Number SCRPMA-001 Technical Data Measuring Range . . . . . . . . . . . . . . .20 – 10,000 RPM Measuring Distance . . . . . . . . . . . . . . . . . .0.1 – 19.5 in Accuracy . . . . . . . . . . . . . . . . . . . . . . . . . . . ..0.5% FS Excitation Voltage . . . . . . . . . . . . . . . . . . . . .7 – 9 VDC Output Signal . . . . . . . . . . . . . . . . . . . . . . . .0 – 3 VDC Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 RPM SCRPM Tachometer for Serviceman and the Parker Service Master Meters. Displays a precision measurement of rotational speed. 5-pin push-pull style connector. Part Number SCRPM-220 Data Cable/Software for use between the Serviceman Meter and a PC (Windows 98 and newer). Part Number SCSW-KIT-152 Special Note All Parker SensoControl hand-held diagnostic meters are now equipped with the same 5-pin push-pull style connector ports. This means accessories such as pressure sensors, temperature sensors, flow meters, tachometers and cables are all interchangeable between the Serviceman and the Parker Service Master meters. The SensoControl® Serviceman™/Service Master and The Parker Service Master Easy Components and Accessories Diagnostic Products Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 F-22 www.parker.com/quickcouplings F Diagnostic Test Port Couplings PD Series Applications PD Series couplings provide easy connection for mechanical gauges or specialized diagnostic equipment like SensoControl®. Typically, PD or BPD nipples are permanently mounted in the system at threaded test ports, in rigid tubing or in hose assemblies. PD couplers are attached to test instruments. Couplers align to the mating nipples without threading. This allows gauges, transducers and other test equipment to be snapped into place without difficulty. Note: Protective dust plugs and caps play a crucial role in the life of a quick coupling and no purchase of a hydraulic quick coupling is complete without the selection of an appropriate dust plug and cap. See pages noted in Table of Contents for dust plugs and caps for the Parker full line of hydraulic couplings. Features • Flush-face poppet valves minimize air inclusion and spillage, provide easy-to-clean surfaces, and help to prevent contamination. • Grip-tight knurled sleeves help to make connecting and disconnecting easy, even while wearing gloves. • Nipples are machined from high tensile steel for strength to withstand 6000 PSI continuous operating pressure. BPD nipples offer features similar to the standard steel PD nipples with the added feature of a brass body. • PD nipples are designed to meet or exceed SAE J1502 and ISO 15171-1 design and performance specifications. • End connections include pipe, O-ring, metric thread, bulkhead, 37° Flare, ORFS and bite-type. Specifications PD Series DUST CAP Body Size Dust Cap (in.) Part No. 1/8 PD6-285 Body Size 1/8 Description PD Coupler PD Nipple BPD Nipple Assembly Part Number PD242 PD361 BPD343Y — Body Material (Steel) Carbon Steel High Tensile Brass — Steel Rated Pressure (PSI) 6000 6000 300 6000 Temperature Range (STD Seals) Nitrile -40°F to +250°F -15°F to +400°F -40°F to +250°F (Fluorocarbon) Rated Flow (GPM) — — — 0.8 Max. Recommended Flow (GPM) — — — 4.0 Burst Pressure (PSI/Min) 23,000 40,000 — 17,000 Vacuum Data (Inches Hg) 27.5 27.5 27.5 27.5 Pressure Drop at Rated Flow (PSI) with 200 SUS Fluid — — — 56 Spillage at 15 PSI (ml)-Assembly 0.1 per disconnect Air Inclusion (ml)-Assembly 0.02 per connect Connect Force-Assembly 41 Lbs. (100 PSI) Disconnect Force-Assembly 20 Lbs. (100 PSI) Optional Seals Suffix* *To select proper seal materials, see Fluid Compatibility Chart in Appendices section, or contact your Parker Quick Coupling Distributor. **N/A = Not Available; STD = Standard (No Suffix Needed) No suffix is required when ordering products with the standard Nitrile seals. When specifying an optional seal, refer to the following chart to determine the appropriate suffix.** Coupling Series Ethylene Fluoro- Neoprene Perfluoro- Propylene carbon elastomer PD Series W Y Z PDP Series W Y Z Coupler/Nipple Material • Prefix “B” for Brass body • Prefix “SS” for Stainless Steel body • Standard body material is Steel Ordering information Diagnostic Products Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 F-23 www.parker.com/quickcouplings F Diagnostic Body Female Female Dimensions (in.) Size Part Thread Thread Overall Wrench Largest Wt. (LB.) (in.) No. NPTF ORB Length Flats Diameter P/Piece A B C 1/8 PD222 1/8-27 – 1.67 0.81 0.96 0.20 1/8 PD240 – 7/16-20 2.12 0.81 0.96 0.26 1/8 PD242 1/4-18 – 2.12 0.81 0.96 0.25 1/8 SSPD242Y** 1/4-18 – 2.12 0.81 0.96 0.25 1/8 PD260 – 9/16-18 2.12 0.81 0.96 0.24 Test Port Couplings PD Series Couplers Female Thread Male Straight Thread Metric Thread Male Pipe Thread Nipples Female Pipe Thread Male Thread A C B D E G F D E F G D E G F F D E G A C B Body Thread Dimensions (in.) Size Part Size Overall Exposed Hex Largest Wt. (LB.) (in.s) No. Metric Length Length Size Diameter P/Piece D E F G 1/8 PD357 M10 x 1.0 1.80 1.10 0.69 0.79 0.17 1/8 PD3107 M16 x 1.5 1.54 0.84 0.88 1.01 0.08 1/8 PD3127 M18 x 1.5 1.60 0.90 0.94 1.08 0.09 1/8 PD3147 M20 x 1.5 1.50 0.80 0.75 0.87 0.07 Body Thread Dimensions (in.) Size Part* Size Overall Exposed Hex Largest Wt. (LB.) (in.) No. ORB Length Length Size Diameter P/Piece D E F G 1/8 PD331 3/8-24 1.80 1.10 0.69 0.79 0.17 1/8 PD341 7/16-20 1.60 0.90 0.69 0.79 0.08 1/8 PD351 1/2-20 1.32 0.62 0.63 0.72 0.05 1/8 PD361 9/16-18 1.32 0.62 0.69 0.79 0.06 Body Thread Dimensions (in.) Size Part Size Overall Exposed Hex Largest Wt. (LB.) (in.) No. NPTF Length Length Size Diameter P/Piece D E F G 1/8 PD323 1/8-27 1.55 0.85 0.69 0.79 0.17 1/8 BPD323Y* 1/8-27 1.44 0.74 0.63 0.72 0.17 1/8 BPD343Y* 1/4-18 1.48 0.78 0.69 0.79 0.06 1/8 PD343 1/4-18 1.48 0.78 0.69 0.79 0.06 1/8 SSPD343Y** 1/4-18 1.48 0.78 0.69 0.79 0.06 1/8 PD363 3/8-18 1.50 1.13 0.81 0.96 0.09 Body Thread Dimensions (in.) Size Part Size Overall Exposed Hex Largest Wt. (LB.) (in.) No. NPTF Length Length Size Diameter P/Piece D E F G 1/8 PD322 1/8-27 1.48 0.78 0.56 0.65 0.06 1/8 PD342 1/4-18 1.63 0.93 0.75 0.87 0.12 Body Male Male Dimensions (in.) Size Part Thread Thread Overall Wrench Largest Wt. (LB.) (in.) No. NPTF ORB Length Flats Diameter P/Piece A B C 1/8 PD243 1/4-18 – 2.26 0.81 0.96 0.23 * Note: Add -6 to part number to include dust cap, for example PD343-6 * BPD designates brass body, Fluorocarbon seal standard ** SSPD designates 316SS body, Fluorocarbon seal standard Diagnostic Products Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 F-24 www.parker.com/quickcouplings F Diagnostic Test Port Couplings PD Series Nipples Bulkhead Triple-Lok Tube End Nipples* Triple-Lok PD — — BTX Seal-Lok PD — — BTL A B Bulkhead Seal-Lok D E F G D E F G A B A B A B Body Part Dimensions (in.) Size No. Tube Overall Exposed Wt. (LB.) (in.) Steel Size Length Length P/Piece A B 1/8 PD34BTX 1/4 1.64 0.94 0.10 1/8 PD36BTX 3/8 1.66 0.96 0.09 A B 1/8 PD38BTX 1/2 1.17 0.47 0.12 1/8 PD312BTX 3/4 1.39 0.69 0.27 * Tube end nipples are designed to meet the performance standards of the tube or hose fitting connection, which may or may not meet SAE J1502 Standards. Body Part Dimensions (in.) Size No. Thread Tube Overall Exposed Hex Largest Wt. (LB.) (in.) Steel Size Size Length Length Size Diameter P/Piece D E F G 1/8 PD345 7/16-20 1/4 2.92 2.22 0.81 0.94 0.19 1/8 PD355 1/2-20 5/16 2.92 2.22 0.81 0.94 0.19 1/8 PD365 9/16-18 3/8 3.00 2.30 0.81 0.94 0.20 Body Part Dimensions (in.) Size No. Thread Tube Overall Exposed Hex Largest Wt. (LB.) (in.) Steel Size Size Length Length Size Diameter P/Piece D E F G 1/8 PD346 9/16-18 1/4 2.98 2.27 0.81 0.94 – 1/8 PD366 11/16-16 3/8 3.08 2.37 1.00 1.16 – 1/8 PD386 13/16-16 1/2 3.18 2.47 1.12 1.30 – Body Part Dimensions (in.) Size No. Tube Overall Exposed Wt. (LB.) (in.) Steel Size Length Length P/Piece A B 1/8 PD34BTL 1/4 2.18 1.48 0.12 1/8 PD36BTL 3/8 2.30 1.60 0.14 A B 1/8 PD38BTL 1/2 1.57 0.83 0.13 1/8 PD310BTL 5/8 1.16 0.46 0.19 * Tube end nipples are designed to meet the performance standards of the tube or hose fitting connection, which may or may not meet SAE J1502 Standards. Note: Add -6 to part number to include dust cap, for example PD343-6 Diagnostic Products Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 F-25 www.parker.com/quickcouplings F Diagnostic Test Port Couplings PDP Series Features • Made to connect under pressure up to 6000 psi • Grip-tight knurled sleeves help to make connecting and disconnecting easy, even while wearing gloves. • Nipples are machined from high tensile steel for strength to withstand 6000 PSI continuous operating pressure. • End connections include pipe, O-ring, 37º Flare and ORFS • Durable Ball Valve Nipple. • Coupler is unvalved to allow gauges and transducers to return to zero when disconnected. Applications The PDP Series couplings provide easy connection for mechanical gauges or specialized diagnostic equipment like SensoControl. Typically, PDP nipples are permanently mounted in the system at threaded test ports, in rigid tubing or in hose assemblies. PDP couplers are attached to test instruments. Locking balls align the couplers to the mating nipples without threading, so gauges, transducers and other test equipment can be snapped into place without difficulty. Parker's PDP Series couplings offer the advantages of PD couplings, but are designed to connect easily and quickly under full system pressure up to 6000 PSI (operating). PDP couplers and nipples push to connect with a constant force of only six pounds. Then the coupler base is turned to open the valve and complete the connection. In the connected position, the coupler base blocks the retracting sleeve to prevent accidental disconnects. Coupler (connect-under-pressure) Female Thread A B C Body Part Thread Dimensions (in.) Size No. Size Overall Wrench Largest Wt. (LB.) (in.) Steel NPTF Length Flats Diameter P/Piece A B C 1/8 PDP242 1/4-18 2.15 0.81 0.96 – Specifications Optional Seals Suffix* *To select proper seal materials, see Fluid Compatibility Chart in Appendices section, or contact your Parker Quick Coupling Distributor. **N/A = Not Available; STD = Standard (No Suffix Needed) No suffix is required when ordering products with the standard Nitrile seals. When specifying an optional seal, refer to the following chart to determine the appropriate suffix.** Coupling Series Ethylene Fluoro- Neoprene Perfluoro- Propylene carbon elastomer PD Series W Y Z PDP Series W Y Z Coupler/Nipple Material Standard body material is steel. Ordering information PDP Series DUST CAP Body Size Dust Cap (in.) Part No. 1/8 PD6-285 Body Size 1/8” Description PDP Coupler PDP Nipple Assembly Body Material (Steel) Carbon High Tensile — Steel Steel Rated Pressure (PSI) — 6000 6000 Temperature Range (STD Seals) Nitrile -40°F to +250°F Connect Force-Assembly 6 Lbs (0 PSI - 6000 PSI) Disconnect Force-Assembly 7 Lbs (0 PSI - 6000 PSI) Diagnostic Products Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 F-26 www.parker.com/quickcouplings F Diagnostic Nipples* (connect-under-pressure) Male Pipe D E F G Test Port Couplings PDP Series D G E F D E F G Triple-Lok D E F G Straight Thread Seal-Lok Body Part Thread Dimensions (in.) Size No. Size Overall Exposed Hex Largest Wt. (LB.) (in.) Steel NPTF Length Length Size Diameter P/Piece D E F G 1/8 PDP323 1/8-27 2.02 1.46 0.69 0.79 0.26 1/8 PDP343 1/4-18 1.48 0.93 0.69 0.79 0.12 Body Part Thread Dimensions (in.) Size No. Size Overall Exposed Hex Largest Wt. (LB.) (in.) Steel ORB Length Length Size Diameter P/Piece D E F G 1/8 PDP341 7/16-20 2.06 1.50 0.69 0.79 0.12 1/8 PDP361 9/16-18 1.48 0.93 0.69 0.79 0.07 *Add -6 to part number to include dust cap. Body Part Dimensions (in.) Size No. Tube Overall Exposed Hex Largest Wt. (LB.) (in.) Steel Size Length Length Size Diameter P/Piece D E F G 1/8 PDP34BTX 1/4 2.11 1.55 0.69 .80 – 1/8 PDP36BTX 3/8 2.13 1.57 0.69 .80 – Body Part Dimensions (in.) Size No. Tube Overall Exposed Hex Largest Wt. (LB.) (in.) Steel Size Length Length Size Diameter P/Piece D E F G 1/8 PDP34BTL 1/4 2.65 2.09 .69 .80 – 1/8 PDP36BTL 3/8 2.77 2.21 .81 .94 – Diagnostic Products Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 F-27 www.parker.com/quickcouplings F Diagnostic Port Hex Interface Part Thread Size Thread Overall Wt. (LB.) No. Size (mm) Size Length P/Piece A B C D EMA3/1/8NPT 1/8-27NPT 17 M16X2.0 1.81 0.15 EMA3/1/4NPT 1/4-18NPT 17 M16X2.0 1.98 0.16 EMA3/1/4NPT71 1/4-18NPT 17 M16X2.0 1.95 0.16 Stainless Steel Port Hex Interface Part Thread Size Thread Overall Wt. (LB.) No. Size (mm) size Length P/Piece A B C D EMA3/7/16-20UNF-2A* 7/16-20UNF-2A 17 M16X2.0 1.88 0.15 EMA3/9/16-18UNF-2A* 9/16-18UNF-2A 19 M16X2.0 1.88 0.17 * O-Ring seal on port Test Port Couplings EMA3 Series Male Pipe Thread SAE Straight Thread Metric Straight Thread British Parallel Pipe Features • Knurled sleeve allows simple twist-to-connect operation without the use of tools • Rugged design allows connect-under-pressure operation up to 5800 psi • Maximum rated working pressure of 9000 psi exceeds the requirements of most applications • Integral threaded dust cap protects the test point from damage and contamination • EMA fittings are machined from solid barstock and protected with Chromium-6 Free plating. • Stainless steel springs for corrosion resistance • Elastomeric interface and valve seals provide leak free operation • Compact design and optional high pressure hose assemblies provide flexibility for tight space requirements D C A B D C A B D C A B D C A B Applications EMA couplings provide easy diagnostic connections for Parker SensoControl® equipment or mechanical gages. EMA test points are typically permanently plumbed into a fluid system at locations where pressure measurements are required for maintenance or testing. Integral pressure cap protects the test point from damage and prevents contamination of the fluid system. Proven twist-to-connect design allows the test points to be connected even when the system is in operation and the test points are pressurized. EMA’s compact design and optional high pressure hose assemblies allow extra flexibility for the location of system test points. Although designed primarily for diagnostic applications, EMA fittings and hose assemblies are idea for a wide range of applications that require compact high pressure connections and limited flow rates. Specifications Body Size 1/8 Rated Pressure (PSI) 9000 PSI Max Connect-Under-Pressure (PSI) 5800 Rated Flow (GPM) 0.8 Body Material Chromium-6 Free Plated Steel Seal Material (std.) Nitrile/Fluorocarbon Temperature Range (std. seals) -15° to +250° F Port Hex Interface Part Thread Size Thread Overall Wt. (LB.) No. Size (mm) Size Length P/Piece A B C D EMA3/M8X1OR* M8X1 17 M16X2.0 1.81 0.15 EMA3/10X1ED** M10X1 17 M16X2.0 1.85 0.15 EMA3/12X1.5ED** M12X1.5 17 M16X2.0 1.94 0.16 EMA3/14X1.5ED** M14X1.5 19 M16X2.0 1.94 0.16 * O-Ring seal on port ** Molded seal on port Port Hex Interface Part Thread Size Thread Overall Wt. (LB.) No. Size (mm) Size Length P/Piece A B C D EMA3/1/8ED** 1/8 BSPP 19 M16X2.0 1.77 0.15 EMA3/1/4ED** 1/4 BSPP 19 M16X2.0 1.94 0.16 EMA3/3/8ED** 3/8 BSPP 21 M16X2.0 1.94 0.16 ** Molded seal on port Diagnostic Products Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 F-28 www.parker.com/quickcouplings F Diagnostic Test Port Couplings EMA3 Series EMA Gauge Adapter Union Port Hex Port Part Thread Size Thread Overall Wt. (LB.) No. Size (mm) Size Length P/Piece A B C D MAV1/4NPT-MA3 1/4-18NPT 19 M16X2.0 2.22 0.16 MAV1/4NPT-MA3-KM 1/4-18NPT 19 M16X2.0 2.22 0.23 Includes Dust Cap Port Hex Port Part Thread Size Thread Overall Wt. (LB.) No. Size (mm) Size Length P/Piece A B C D MAVMD1/4NPT-MA3 1/4-18NPT 19 M16X2.0 2.22 0.18 Port Hex Port Part Thread Size Thread Overall Wt. (LB.) No. Size (mm) Size Length P/Piece A B C D EMA3VS M16X2.0 17 M16X2.0 1.65 0.11 D B C A D A B C Diagnostic Products Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 F-29 www.parker.com/quickcouplings F Diagnostic Hex Port Interface Part Overall Size Largest Thread Thread Wt. (LB.) No. Length Metric Diameter Size Size P/Piece A B – D E SCA-1/2-EMA-3 2.07 27mm – 1/2-14BSPP M16X2.0 0.30 Test Port Couplings Transducer Adapters Transducer Adapters 1/2-14BSPP Thread* Port Interface Part Overall Hex Largest Thread Thread Wt. (LB.) No. Length Size Diameter Size Size P/Piece A B C D E PD288 2.52 1.19 1.38 1/2-14BSPP – 0.35 Port Interface Part Overall Hex Largest Thread Thread Wt. (LB.) No. Length Size Diameter Size Size P/Piece A B C D E PDP288 2.58 1.19 1.38 1/2-14BSPP – 0.35 B C D A B C D A A D E B * Note: For old style M22X1.5 thread contact the division Flexible Hose Length Length Thread Size Part No. (in.) (mm) A SMA3-200 7.90 200 M16x2.0 SMA3-400 15.75 400 M16x2.0 SMA3-800 31.50 800 M16x2.0 SMA3-2000 78.75 2000 M16x2.0 SMA3-4000 157.50 4000 M16x2.0 A A LENGTH Note: Other lengths available upon request. Maximum pressure rating for test hose is 9000 psi. Diagnostic Products Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 F-30 www.parker.com/quickcouplings F Diagnostic Nipples Male Straight Thread Male Pipe Thread Body Thread Thread Dimensions (in.) Size Part Size Size Overall Exposed Hex Largest Wt. (LB.) (in.) No. ORB or NPTF METRIC Length Length Size Diameter P/Piece D E F G 1/8 BPDFS341 7/16-20 ORB 1.60 0.90 0.69 0.79 0.08 1/8 BPDFS343 1/4-18 NPTF 1.48 0.78 0.69 0.79 0.06 1/8 PDFS-PROBE* NA – – – – – Fluorocarbon seal is standard. Dust Cap PD6-285 is recommended. Test Port Couplings Fluid Sampling Specifications Body Size (in.) 1/8 Rated Pressure (psi) 500 Temperature Range (std seals: Fluorocarbon) -40° to +250°F Seal material Fluorocarbon Body Female Female Dimensions (in.) Size Part Thread Thread Overall Wrench Largest Wt. (LB.) (in.) No. NPTF ORB Length Flats Diameter P/Piece A B C 1/8 PDFS242 1/4-18 – 2.15 0.81 0.96 0.25 Couplers Female Thread D E G F D E G F Features These diagnostic fluid sampling products are designed to provide an easy access point for obtaining fluid samples. A permanently mounted test point eliminates the need to shut down or break lines when taking samples and reduces the chances of contamination. Fluid analysis is crucial in both engines and hydraulic systems as it can reveal problems with filtration and other internal components. Early detection can prevent costly repairs, unscheduled maintenance and production downtime. These fluid sampling nipples should be installed in either low pressure or return lines. For the most accurate monitoring, fluid samples should be constantly taken from the same location. A B C Diagnostic Products Quick Coupling Division 8145 Lewis Road • Minneapolis, MN 55427 F-31 www.parker.com/quickcouplings F Diagnostic When ordering Parker coupler bodies and nipples, please state the part number of each type of coupler body and each type of nipple desired. List coupler bodies and nipples as separate items rather than in combinations. Be sure to double check thread or hose sizes of items required. Many of Parker’s coupling products are available with unique non-standard options well suited to very specific applications. Examples of unusual end use applications might include: high temperatures (above 250° F), extremely caustic/corrosive solutions passing through the coupling, external/environmental corrosion situations, or other high wear and tear situations such as dragging the product along the ground. Please see the Fluid Compatibility Chart at the end of the catalog for a guide in selecting material for various media. It is always recommended that the Quick Coupling Division be contacted with any questions concerning specific product application needs. Typically, a prefix or suffix is added to the base part number to specify a non-standard O-ring seal, or special option. The Optional Seals Suffix chart illustrates the designations. Please Note: Certain couplings series have additional "Special Order Information" which should be referred to in ordering those products. If applicable to the product, "Special Order Information" is found next to the Features and Specifications charts. Coupler/Nipple Material • Prefix “B” for Brass body • Prefix “SS” for Stainless Steel body • Standard body material is Steel Optional Seals Suffix* *To select proper seal materials, see Fluid Compatibility Chart in Appendices section, or contact your Parker Quick Coupling Distributor. **N/A = Not Available; STD = Standard (No Suffix Needed) Ordering Information Test Port Coupling-Selection Guide Diagnostic Products Note: See the Specifications Table for PD and PDP Series for more information. No suffix is required when ordering products with the standard Nitrile seals. When specifying an optional seal, refer to the following chart to determine the appropriate suffix.** Coupling Series Ethylene Fluoro- Neoprene Perfluoro- Propylene carbon elastomer PD Series W Y Z PDP Series W Y Z Valving Body Material* Locking Std. Seal Temp Rated Size Br SS S P Mechanism Material Range** Pressure Test Port PD Series Flush Face 1/8" • • • Ball Nitrile -40° to +250° F 6000 PSI PDP Series Ball 1/8" • Ball Nitrile -40° to +250° F 6000 PSI EMA3 Series Poppet 1/8" • • Threads Nitrile/Fluorocarbon -15° to +250° F 9000 PSI * See Fluid Compatibility chart and/or consult factory for questions regarding proper material for specific applications. CODE: Br = Brass; SS = Stainless Steel; S = Steel; P = Plastic **Temperature Range for standard seal material. SensoControl® diagnostic product’s technical information subject to change. Appendices Parker Hannifin Corporation Quick Coupling Division 1 Minneapolis, MN 55427 Appendices Parker Hannifin Corporation Quick Coupling Division I-1 Minneapolis, MN 55427 Appendices Appendices Fluid Compatibility Chart CODES: 1 = Satisfactory 2 = Fair 3 = Not Recommended 4 = Insufficient Data Available BODY MATERIAL SEAL MATERIAL MEDIA Brass Steel 316 S.S. 303 S.S. Nitrile E.P. Fluorocarbon Neoprene 3M FC-75 4 4 4 4 1 1 2 1 ACETAMIDE 4 4 1 2 1 1 3 1 ACETIC ACID (5%) 3 3 1 1 2 1 1 1 ACETONE 1 2 1 1 3 1 3 3 ACETOPHENONE 2 2 2 1 3 1 3 3 ACETYL ACETONE 2 2 2 2 3 1 3 3 ACETYL CHLORIDE 4 2 2 2 3 3 1 3 ACETYLENE 3 2 1 1 1 1 1 2 AIR (200 DEGREES F.) 1 2 1 1 1 1 1 1 AIR (300 DEGREES F.) 1 2 1 1 2 2 1 2 AIR (400 DEGREES F.) 1 2 1 1 3 3 1 3 ALUMINUM ACETATE 4 4 4 4 2 1 3 2 ALUMINUM BROMIDE 4 4 4 4 1 1 1 1 ALUMINUM CHLORIDE (10%) 3 3 3 3 1 1 1 1 ALUMINUM CHLORIDE (100%) 3 2 2 2 1 1 1 1 ALUMINUM FLOURIDE 3 3 3 3 1 1 1 1 ALUMINUM NITRATE 3 3 2 2 1 1 1 1 ALUMINUM SALTS 4 4 4 4 1 1 1 1 ALUMINUM SULPHATE 2 3 2 3 1 1 1 1 ALUMS (NH3,Cr,K) 4 4 4 4 1 1 3 1 AMMONIA (ANHYDROUS) 3 2 1 1 2 1 3 1 AMMONIA (COLD, GAS) 3 2 4 1 1 1 3 1 AMMONIA (HOT, GAS) 3 2 4 1 3 2 3 2 AMMONIUM CARBONATE 3 2 3 3 3 1 1 1 AMMONIUM CHLORIDE 3 3 2 3 1 1 1 1 AMMONIUM HYDROXIDE 3 3 1 2 3 1 3 1 AMMONIUM NITRATE 3 3 1 1 1 1 4 1 AMMONIUM PERSULFATE SOLUTION 3 3 1 2 3 1 4 4 AMMONIUM PHOSPHATE (MONO-, DI-, TRI-BASIC) 3 3 3 2 1 1 4 1 AMMONIUM SALTS 4 4 4 4 1 1 3 1 AMMONIUM SULFATE 3 3 2 3 1 1 3 1 AMYL BORATE 4 4 4 4 1 3 1 1 AMYL CHLORIDE 4 2 1 1 4 3 1 3 AMYL CHLORONAPHTHALENE 4 4 4 4 3 3 1 3 AMYL NAPHTHALENE 4 4 4 4 3 3 1 3 ANIMAL OIL (LARD OIL) 2 2 2 2 1 2 1 2 AROCLOR 1248 2 3 3 3 3 2 1 3 AROCLOR 1254 2 3 3 3 3 2 1 3 AROCLOR 1260 2 3 3 3 1 4 1 1 Codes The following seal compound and body material compatibility chart is provided as an aid in selecting a specific synthetic rubber compound or body material for a particular application. Operating and environmental conditions must be considered when making the selection of a quick coupling. Refer to the appropriate section of the catalog for Ordering Information for Seal Codes for specific products. To indicate a special material just add the appropriate code letter as a suffix to the catalog number of the coupler. It is not necessary to use the code “STD” as the standard Nitrile seal will be used when another code is not used. For recommendations for media not listed below, please contact your Parker representative or the factory. Note This chart is intended as a guide only and is not be considered as a recommendation to use Parker quick action couplings in a specific application or with a specific fluid, other factors that must be considered include but are not limited to: fluid and ambient temperature, system pressure, both operating and peak, frequency of connect and disconnect, and applicable standards or regulations. Appendices Parker Hannifin Corporation Quick Coupling Division I-2 Minneapolis, MN 55427 Appendices CODES: 1 = Satisfactory 2 = Fair 3 = Not Recommended 4 = Insufficient Data Available Fluid Compatibility Chart BODY MATERIAL SEAL MATERIAL MEDIA Brass Steel 316 S.S. 303 S.S. Nitrile E.P. Fluorocarbon Neoprene AROMATIC FUEL - 50% 4 4 4 4 2 3 1 3 ARSENIC ACID 3 3 1 1 1 1 1 1 ASPHALT 3 3 1 1 2 3 1 2 ASTM OIL, NO. 1 1 1 1 1 1 3 1 1 ASTM OIL, NO. 2 1 1 1 1 1 3 1 2 ASTM OIL, NO. 3 1 1 1 1 1 3 1 3 ASTM OIL, NO. 4 1 1 1 1 2 3 1 3 ASTM REFERENCE FUEL A 3 2 1 1 1 3 1 2 ASTM REFERENCE FUEL B 3 2 1 1 1 3 1 3 ASTM REFERENCE FUEL C 3 2 1 1 2 3 1 3 AUTOMOTIVE BRAKE FLUID 4 4 4 4 3 1 3 2 BARIUM CHLORIDE 3 3 2 3 1 1 1 1 BARIUM HYDROXIDE 3 2 2 3 1 1 1 1 BARIUM SALTS 4 4 4 4 1 1 1 1 BARIUM SULFIDE 3 2 3 3 1 1 1 1 BEER 3 3 1 1 1 1 1 1 BEET SUGAR LIQUORS 3 3 1 1 1 1 1 2 BENZALDEHYDE 3 3 2 3 3 1 3 3 BENZENE 3 2 3 3 3 3 1 3 BENZENESULFONIC ACID (10%) 3 3 3 3 3 3 1 2 BENZINE 4 4 4 4 1 3 1 2 BENZOIC ACID 3 3 3 3 3 3 1 3 BENZYL ALCOHOL 4 3 1 2 3 2 1 2 BENZYL CHLORIDE 3 3 2 3 3 3 1 3 BLEACH LIQUOR 4 4 4 4 3 1 1 2 BORAX 3 2 3 3 2 1 1 3 BORDEAUX MIXTURE 4 4 4 4 2 1 1 2 BORIC ACID 3 3 2 3 1 1 1 1 BRAKE FLUID (NON-PETROLEUM) 4 4 4 4 3 1 3 2 BRINE (SODIUM CHLORIDE) 3 3 1 1 1 1 1 1 BROMINE 4 4 4 4 3 3 1 3 BROMINE WATER 4 4 4 4 3 2 1 3 BUNKER OIL 4 4 4 4 1 3 1 3 BUTADIENE (MONOMER) 3 2 1 2 3 3 1 3 BUTANE 3 1 1 1 1 3 1 1 BUTANE (2,2, & 2,3-DIMETHYL) 4 4 4 4 1 3 1 2 BUTANOL (BUTYL ALCOHOL) 2 1 1 1 1 2 1 1 BUTTER - ANIMAL FAT 2 3 1 2 1 1 1 2 BUTYL BUTYRATE 4 4 4 4 3 1 1 3 BUTYL STEARATE 4 4 4 4 2 3 1 3 CALCINE LIQUORS 4 4 4 4 1 1 1 4 CALCIUM ACETATE 4 4 4 4 2 1 3 2 CALCIUM BISULFITE 3 3 2 3 2 1 2 2 CALCIUM CARBONATE 3 2 3 2 1 1 1 1 CALCIUM CHLORIDE 3 3 2 3 1 1 1 1 CALCIUM HYDROXIDE 3 3 2 3 1 1 1 1 CALCIUM HYPOCHLORITE 3 3 2 3 2 1 1 2 CALCIUM SALTS 4 4 4 4 1 1 1 1 CALCIUM SULFIDE 3 3 2 2 1 1 1 1 CALICHE LIQUORS 4 4 4 4 1 1 1 1 CANE SUGAR LIQUORS 4 2 1 1 1 1 1 1 CARBON BISULPHIDE 4 4 4 4 3 3 1 3 CARBON DIOXIDE 1 2 1 1 1 1 1 1 CARBON DISULFIDE 2 2 2 2 3 3 1 3 CARBON MONOXIDE 1 1 1 1 1 1 1 2 CARBON TETRACHLORIDE 2 3 1 3 2 3 1 3 CARBONIC ACID 3 3 1 2 2 1 1 1 CASTOR OIL 1 1 1 1 1 2 1 1 CELLUGUARD 4 4 4 4 1 1 1 1 CELLULUBE (NOW FYRQUEL) 4 4 4 4 3 1 1 3 CHINA WOOD OIL (TUNG OIL) 2 2 1 1 1 3 1 2 CHLORINATED SALT BRINE 4 4 4 4 3 3 1 3 CHLORINATED SOLVENTS 4 4 4 4 3 3 1 3 CHLOROBENZENE 3 3 2 3 3 3 1 3 CHLOROBUTADIENE 4 4 4 4 3 3 1 3 CHLOROFORM 3 2 2 1 3 3 1 3 Parker Hannifin Corporation Quick Coupling Division I-3 Minneapolis, MN 55427 Appendices Fluid Compatibility Chart CODES: 1 = Satisfactory 2 = Fair 3 = Not Recommended 4 = Insufficient Data Available BODY MATERIAL SEAL MATERIAL MEDIA Brass Steel 316 S.S. 303 S.S. Nitrile E.P. Fluorocarbon Neoprene CHLORPHENOL 4 4 4 4 3 3 1 3 COCOANUT OIL 4 4 4 4 1 3 1 3 COPPER CHLORIDE 4 4 4 4 1 1 1 2 COPPER SALTS 4 4 4 4 1 1 1 1 COPPER SULFATE 3 3 2 3 1 1 1 1 CORN OIL 2 1 1 1 1 3 1 3 COTTONSEED OIL 3 2 1 2 1 3 1 3 CREOSOLS 3 2 1 2 3 3 1 3 CREOSOTE 3 3 2 1 1 3 1 2 CRESYLIC ACID 4 2 1 2 3 3 1 3 CRUDE OIL 3 2 1 1 2 3 1 3 CUTTING OIL 4 1 1 1 1 3 1 2 DECANE 4 4 4 4 1 3 1 3 DENATURED ALCOHOL 4 4 4 4 1 1 1 1 DETERGENT, WATER SOLUTION 3 3 1 1 1 1 1 2 DIESEL FUEL 1 1 1 1 1 3 1 3 DIETHYLENE GLYCOL 3 1 1 1 1 1 1 1 DIMETHYL FORMAMIDE 4 4 1 1 2 1 3 3 DOW CHEMICAL HD50-4 4 4 4 4 4 1 3 2 DOW CORNING 200, 510, 550 4 4 4 4 2 1 1 1 DOWTHERM A,E 3 1 2 2 3 3 1 3 ETHANOL 1 3 3 3 3 1 3 1 ETHYL CHLORIDE 2 3 1 3 1 3 1 3 ETHYL HEXANOL 4 4 4 4 1 1 1 1 ETHYLENE DICHLORIDE 3 3 1 2 3 3 1 3 ETHYLENE GLYCOL 2 2 1 2 1 1 1 1 FATTY ACIDS 3 3 1 2 2 3 1 2 FREON 11 1 4 4 4 2 3 2 3 FREON 12 1 1 3 1 2 3 1 1 FREON 22 1 3 1 1 3 3 3 1 FREON 134a 1 1 1 1 2 1 4 1 FUEL OIL 3 1 1 1 1 3 1 2 GALLIC ACID 3 3 2 2 2 2 1 2 GAS, LIQUID, PROPANE (LPG) 1 3 1 1 1 3 1 2 GAS, NATURAL 2 3 1 1 1 3 1 1 GASOLINE 1 2 1 1 3 3 1 3 GELATIN 3 3 1 1 1 1 1 1 GLUCOSE 1 1 1 1 1 1 1 1 GLYCERINE (GLYCEROL) 2 1 1 1 1 1 1 1 GLYCOLS 3 2 2 2 1 1 3 1 GREEN SULFATE LIQUOR 3 3 3 3 2 1 1 2 GULF - FR FLUID (EMULSION) 4 4 4 4 1 3 1 2 GULF - FR FLUID G 4 4 4 4 1 1 1 1 GULF - FR FLUID P 4 4 4 4 3 2 2 3 HELIUM 1 1 1 1 1 1 1 1 HEPTANE 1 1 1 1 1 3 1 2 HYDRAULIC OIL (PETROLEUM BASE) 1 1 1 1 1 3 1 1 HYDRAULIC OIL (WATER BASE) 4 1 1 1 2 1 3 2 HYDRAZINE 4 3 1 1 2 1 3 2 HYDROGEN GAS 2 2 1 1 1 1 1 1 HYDROLUBE 4 4 4 4 1 1 1 2 ISO OCTANE 1 1 1 1 1 3 1 2 ISOBUTYL ALCOHOL 4 4 1 1 2 1 1 1 ISOPROPYL ALCOHOL 1 1 2 1 2 1 1 2 ISOPROPYL ETHER 1 1 1 1 2 3 3 3 JP3 AND JP4 1 1 1 1 1 3 1 3 KEROSENE 1 1 1 1 1 3 1 2 LARD, ANIMAL FAT 1 1 1 1 1 2 1 2 LINSEED OIL 3 1 1 1 1 3 1 3 LUBRICATING OIL SAE 10, 20, 30, 40, 50 1 1 1 1 1 3 1 2 MAGNESIUM SALTS 4 4 4 4 1 1 1 1 MAGNESIUM SULPHATE 3 3 2 2 1 1 1 1 MERCURY 3 3 1 1 1 1 1 1 METHANE 1 3 1 1 1 3 1 2 METHANOL 1 1 1 1 1 1 3 1 METHYL BROMIDE 4 1 1 1 2 3 1 3 Appendices Appendices Parker Hannifin Corporation Quick Coupling Division I-4 Minneapolis, MN 55427 Appendices CODES: 1 = Satisfactory 2 = Fair 3 = Not Recommended 4 = Insufficient Data Available Fluid Compatibility Chart BODY MATERIAL SEAL MATERIAL MEDIA Brass Steel 316 S.S. 303 S.S. Nitrile E.P. Fluorocarbon Neoprene METHYL CHLORIDE (DRY) 2 3 1 1 3 3 1 3 METHYL CHLORIDE (WET) 1 3 1 3 3 3 1 3 METHYL ETHER 4 4 4 4 1 3 1 3 METHYL ETHYL KETONE (MEK) 1 1 1 1 3 1 3 3 MIL-F-81912 (JP-9) 1 1 1 1 3 3 1 3 MIL-H-5606 1 1 1 1 1 3 1 2 MIL-H-6083 1 1 1 1 1 3 1 1 MIL-H-7083 1 1 1 1 1 1 2 2 MIL-H-8446 (MLO-8515) 2 1 1 1 2 3 1 1 MIL-L-2104 & 2104B 1 1 1 1 1 3 1 2 MIL-L-7808 3 2 1 1 2 3 1 3 MILK 2 1 1 1 1 1 1 1 MINERAL OILS 1 1 1 1 1 3 1 2 MLO-7277 AND MLO-7557 2 1 1 1 3 3 1 3 MOBILE HF 1 1 1 1 1 3 1 2 MONOMETHYL HYDRAZINE 4 4 4 4 2 1 4 2 NAPHTHA (COAL OR PETROLEUM) 2 1 2 2 2 3 1 3 NAPHTHALENE 2 1 2 2 3 3 1 3 NAPHTHENIC ACID 2 1 2 2 2 3 1 3 NEATSFOOT OIL 4 4 4 4 1 2 1 3 NICKEL, ACETATE 3 2 1 1 2 1 3 2 NICKEL CHLORIDE 3 3 2 2 1 1 1 2 NICKEL SALTS 4 4 4 4 1 1 1 2 NICKEL SULFATE 3 3 1 1 1 1 1 1 NITROGEN 1 1 1 1 1 1 1 1 NITROUS OXIDE 2 2 2 1 1 4 4 4 OCTYL ALCOHOL 1 1 1 1 2 3 1 2 OLIVE OIL 2 1 1 1 1 2 1 2 ORTHO-DICHLOROBENZENE 2 2 2 2 3 3 1 3 OXALIC ACID 3 3 2 1 2 1 1 2 OXYGEN (200-400 DEGREES F.) 1 1 1 1 3 3 2 3 OXYGEN, COLD 1 1 1 1 2 1 1 1 OZONE 3 3 1 1 3 1 1 3 PALMITIC ACID 1 2 1 1 1 2 1 2 PARA-DICHLOROBENZENE 2 1 1 2 3 3 1 3 PARKER O LUBE 1 1 1 1 1 3 1 1 PEANUT OIL 2 1 1 1 1 3 1 3 PENTANE (2-3-METHYL, & 2-4 DIMETHYL) 2 2 2 2 1 3 1 2 PERCHLORIC ACID -2N 3 3 2 2 3 2 1 2 PERCHLOROETHYLENE 3 2 2 2 2 3 1 3 PETROLATUM 1 1 1 1 1 3 1 2 PETROLEUM OIL, BELOW 250 DEGREES F. 1 1 1 1 1 3 1 2 PHENOL 1 1 1 1 3 3 1 3 PHOSPHORIC ACID (3 MOLAR) 3 3 2 2 1 1 1 2 PHOSPHORIC ACID (CONCENTRATED) 3 3 2 2 3 1 1 3 PHOSPHOROUS TRICHLORIDE 3 3 1 1 3 1 1 3 PICRIC ACID, MOLTEN 3 3 2 2 2 2 1 2 PICRIC ACID, WATER SOLUTION 3 3 2 2 1 1 1 1 PINE OIL 2 2 1 2 1 3 1 3 PLATING SOLUTIONS (CHROME) 1 3 1 1 4 1 1 3 PLATING SOLUTIONS (OTHER) 4 1 1 1 1 1 1 3 PNEUMATIC SERVICE 1 1 1 1 1 1 1 1 POTASSIUM ACETATE 2 1 2 2 2 1 3 2 POTASSIUM CHLORIDE 3 3 1 2 1 1 1 1 POTASSIUM CYANIDE 3 2 2 2 1 1 1 1 POTASSIUM DICHROMATE 3 1 2 2 1 1 1 1 POTASSIUM HYDROXIDE (50%) 3 2 1 2 2 1 3 2 POTASSIUM NITRATE 2 1 1 1 1 1 1 1 POTASSIUM SALTS 4 4 4 4 1 1 1 1 POTASSIUM SULFATE 3 2 1 1 1 1 1 1 PRL-HIGH TEMP. HYDR. OIL 4 4 4 4 2 3 1 2 PRODUCER GAS 2 1 1 1 1 3 1 2 PROPANE 1 3 1 1 1 3 1 2 PROPYL ACETATE 3 1 1 1 3 2 3 3 PROPYL ALCOHOL 1 1 1 1 1 1 1 1 PROPYLENE 1 1 1 1 3 3 1 3 Parker Hannifin Corporation Quick Coupling Division I-5 Minneapolis, MN 55427 Appendices Appendices Fluid Compatibility Chart CODES: 1 = Satisfactory 2 = Fair 3 = Not Recommended 4 = Insufficient Data Available Contact the division for special EP compound used on 60 Series couplings BODY MATERIAL SEAL MATERIAL MEDIA Brass Steel 316 S.S. 303 S.S. Nitrile E.P. Fluorocarbon Neoprene PYDRAUL 10E 3 1 1 1 3 1 3 3 PYDRAUL A-200, C SERIES 3 1 1 1 3 3 1 3 PYDRAUL, 3 SERIES 3 1 1 1 3 1 1 3 PYROGARD 42, 43, 53, 55 (PHOSPHATE ESTER) 4 4 4 4 3 1 1 3 PYROGARD D 4 4 4 4 1 3 3 2 SEA WATER (SALT WATER) 2 3 1 1 1 1 1 2 SHELL IRUS 905 4 4 4 4 1 3 1 2 SILICONE GREASES 1 1 1 1 1 1 1 1 SILVER NITRATE 3 3 1 2 2 1 1 1 SKYDROL 500, TYPE 2 3 1 1 1 3 1 3 3 SKYDROL 7000, TYPE 2 3 1 1 1 3 1 2 3 SOAP SOLUTIONS 3 3 1 1 1 1 1 2 SODIUM ACETATE 1 1 1 1 2 1 3 2 SODIUM BICARBONATE (BAKING SODA) 2 2 1 1 1 1 1 1 SODIUM BISULPHATE OR BISULPHITE 3 3 2 1 1 1 1 1 SODIUM BORATE 3 2 2 2 1 1 1 1 SODIUM CARBONATE (SODA ASH) 4 1 1 1 1 1 1 1 SODIUM CHLORIDE 3 2 2 2 1 1 1 1 SODIUM CYANIDE 3 1 1 1 1 1 4 1 SODIUM HYDROXIDE (CAUSTIC SODA, LYE) 3 2 1 2 2 1 2 2 SODIUM HYDROXIDE, 50% 3 3 1 2 2 1 2 2 SODIUM METAPHOSPHATE 2 1 2 2 1 1 1 2 SODIUM NITRATE 3 2 1 1 2 1 4 2 SODIUM PERBORATE 3 3 1 1 2 1 1 2 SODIUM PEROXIDE 3 1 2 2 2 1 1 2 SODIUM PHOSPHATES 1 3 2 1 1 1 1 2 SODIUM SALTS 4 4 4 4 1 1 1 2 SODIUM SULFATE 3 2 1 1 1 1 1 1 SODIUM SULFIDE AND SULFITE 3 3 2 3 1 1 1 1 SODIUM THIOSULFATE 3 3 1 2 2 1 1 1 SOYBEAN OIL 2 1 1 1 1 3 1 3 STANNOUS CHLORIDE (15%) 3 3 2 3 1 1 1 1 STEAM, BELOW 400 DEGEEES F. 1 3 1 1 3 1* 3 3 STODDARD SOLVENT 2 1 1 1 1 3 1 2 SUCROSE SOLUTIONS 1 1 1 1 1 1 1 2 SULFUR 2 1 1 1 3 1 1 1 SULFUR LIQUORS 1 1 1 1 2 2 1 2 SULFUR (MOLTEN) 3 3 1 1 3 3 1 3 SULFUR DIOXIDE (DRY) 3 1 1 3 3 1 3 3 SULFUR TRIOXIDE (DRY) 2 2 2 3 3 2 1 3 SUNSAFE 3 1 1 1 1 3 1 2 TANNIC ACID (10%) 1 3 2 3 1 1 1 2 TAR, BITUMINOUS 2 1 1 1 2 3 1 3 TARTARIC ACID 2 3 3 2 1 2 1 2 TERPINEOL 4 4 4 4 2 3 1 3 TERTIARY BUTYL ALCOHOL 1 1 1 1 2 2 1 2 TETRACHLOROETHANE 4 2 1 2 3 3 1 3 TETRACHLOROETHYLENE 3 2 2 4 3 3 1 3 TETRAETHYL LEAD 1 1 1 1 2 3 1 2 TETRAETHYL LEAD (BLEND) 1 1 1 1 2 3 1 3 TITANIUM TETRACHLORIDE 2 1 2 3 2 3 1 3 TOLUENE 1 1 1 1 3 3 1 3 TRANSFORMER OIL 1 1 1 1 1 3 1 2 TRANSMISSION FLUID (TYPE A) 1 1 1 1 1 3 1 2 TRICHLOROETHANE 4 2 1 4 3 3 1 3 TRICHLOROETHYLENE 3 2 2 2 3 3 1 3 TRICRESYL PHOSPHATE 4 1 2 2 3 1 2 3 TURBINE OIL #15 (MIL-L-7808A) 4 2 1 1 2 3 1 3 TURPENTINE 3 2 1 1 1 3 1 3 VARNISH 1 1 1 1 2 3 1 3 WATER 1 3 1 1 1 1 2 2 WHISKEY 1 3 1 1 1 1 1 1 WINE 1 3 1 1 1 1 1 1 WOOD OIL 4 2 1 1 1 3 1 2 XYLENE 1 2 1 1 3 3 1 3 ZINC SULFATE 3 3 2 2 1 1 1 1 Parker Hannifin Corporation Quick Coupling Division I-6 Minneapolis, MN 55427 Appendices Appendices Fluid Compatibility Chart PF Series (Plastic/Polypropylene Material) Ratings Code: G – Good to excellent. Little or no swelling, tensile or surface changes. Preferred choice. L – Marginal or conditional. Noticeable effects but not necessarily indicating lack of serviceability. Further testing suggested for specific application.Very long-term effects such as stiffening or potential for crazing should be evaluated. P – Poor or unsatisfactory. Not recommended without extensive and realistic testing. — – Indicates that this was not tested. # – For Teflon. Indicates good chemical resistance but potential for excessive permeation. MEDIA Rating Acetaldehyde P Acetates L Acetic Acid G Acetic Anhydride L Acetone G Acetyl Bromide – Acetyl Chloride L Air G Alcohols L Aluminum Salts G Ammonia G Amyl Acetate L Aniline G Animal Oils G Arsenic Salts L Aromatic Hydrocarbons – Barium Salts G Benzaldehyde L Benzene (Benzol) L Benzyl Alcohol G Bleaching Liquors – Boric Acid Solution G Bromine P Butane L Butanol – Butyl Acetate P Calcium Salts G Carbon Dioxide G Carbon Disulfide L Carbon Tetrachloride P Caustic Potash G Caustic Soda G Chloracetic Acid L Chlorine (Dry) P Chlorine (Wet) P Chlorobenzene P Chloroform P Chromic Acid G Copper Salts G Cresol L Cyclohexanone L Ethers P Ethyl Acetate L Ethyl Alcohol G Ethylamine L Ethyl Bromide – Ethyl Chloride P Fatty Acids G Ferric Salts G Formaldehyde G Formic Acid G Freon L Gasoline L MEDIA Rating Glucose G Glycerine G Hydriodic Acid – Hydrochloric Acid (Conc.) G Hydrochloric Acid (Med. Conc.) G Hydrofluoric Acid G Hydrogen Peroxide (Conc.) L Hydrogen Peroxide (Dil.) L Hydrogen Sulfide G Iodine G Kerosene P Ketones G Lacquer Solvent L Lactic Acid G Lead Acetate G Linseed Oil G Magnesium Salts G Naphtha L Natural Gas L Nickel Salts G Nitric Acid (Conc.) P Nitric Acid (Dil.) L Nitrobenzene G Nitrogen Oxides – Nitrous Acid G Oils (Animal and Mineral) L Oils (Vegetable) L Oxygen L Perchloric Acid L Phenol G Potassium Salts G Pyridine G Silver Nitrate G Soap Solutions G Sodium Salts G Stearic Acid L Sulfur Chloride P Sulfuric Acid (Conc.) L Sulfuric Acid (Dil.) G Sulfurous Acid L Tannic Acid G Tanning Extracts L Titanium Salts – Toluene (Toluol) P Trichloracetic Acid G Trichlorethylene P Turpentine P Urea G Uric Acid – Water G Xylene (Xylol) P Zinc Chloride G Parker Hannifin Corporation Quick Coupling Division II-1 Minneapolis, MN 55427 Appendices Appendices Safety Guide SAFETY GUIDE FOR SELECTING AND USING QUICK ACTION COUPLINGS AND RELATED ACCESSORIES DANGER: Failure or improper selection or improper use of quick action couplings or related accessories can cause death, personal injury and property damage. Possible consequences of failure or improper selection or improper use of quick action couplings or related accessories include but are not limited to: • Couplings or parts thrown off at high speed. • Dangerously whipping hose. • High velocity fluid discharge. • Contact with conveyed fluids that may be hot, cold, • Explosion or burning of the conveyed fluid. toxic, or otherwise injurious. • Contact with suddenly moving or falling objects that are • Sparking or explosion while paint or flammable to be held in position or moved by the conveyed fluid. liquid spraying. Before selecting or using any Parker quick action couplings or related accessories, it is important that you read and follow the following instructions. 1.1 Scope: This safety guide provides instructions for selecting and using (including installing connecting, disconnecting, and maintaining) quick action couplings and related accessories (including caps, plugs, blow guns, and two way valves). This safety guide is a supplement to and is to be used with, the specific Parker publications for the specific quick action couplings and related accessories that are being considered for use. 1.2 Fail-Safe: Quick action couplings or the hose they are attached to can fail without warning for many reasons. Design all systems and equipment in a failsafe mode, so that failure of the quick action coupling or hose will not endanger persons or property. 1.3 Distribution: Provide a copy of this safety guide to each person that is responsible for selecting or using quick action coupling products. Do not select or use quick action couplings without thoroughly reading and understanding this safety guide as well as the specific Parker publications for the products considered or selected. 1.4 User Responsibility: Due to the wide variety of operating conditions and uses for quick action couplings, Parker and its distributors do not represent or warrant that any particular quick action coupling is suitable for any specific end use system. This safety guide does not analyze all technical parameters that must be considered in selecting a product. The user, through its own analysis and testing, is solely responsible for: • Making the final selection of the quick action couplings. • Assuring that the user’s requirements are met and that the use presents no health or safety hazards. • Providing all appropriate health and safety warnings on the equipment on which the quick action couplings are used. 1.5 Additional Questions: Call the appropriate Parker customer service department if you have any questions or require any additional information. For the telephone numbers of the appropriate customer service department, see the Parker publication for the product being considered or used. 2.0 QUICK ACTION COUPLING SELECTION INSTRUCTIONS 2.1 Pressure: Quick action couplings selection must be made so that the published rated pressure of the coupling is equal to or greater than the maximum system pressure. Surge pressures in the system higher than the rated pressure of the coupling will shorten the quick action coupling’s life. Do not confuse burst pressure or other pressure values with rated pressure and do not use burst pressure or other pressure values for this purpose. 2.2 Fluid Compatibility: Quick action couplings selection must assure compatibility of the body and seal materials with the fluid media used. See the fluid compatibility chart in the Parker publication for the product being considered or used. 2.3 Temperature: Be certain that fluid and ambient temperatures, both steady and transient, do not exceed the limitations of the quick action couplings. Use caution and hand protection when connecting or disconnecting quick action couplings that are heated or cooled by the media they are conducting or by their environment. 2.4 Size: Transmission of power by means of pressurized liquid varies with pressure and rate of flow. The size of the quick action couplings and other components of the system must be adequate to keep pressure losses to a minimum and avoid damage due to heat generation or excessive fluid velocity. 2.5 Pressurized Connect or Disconnect: If connecting or disconnecting under pressure is a requirement, use only quick action couplings designed for that purpose. The rated operating pressure of a quick action coupling may not be the pressure at which it may be safely connected or disconnected. 2.6 Environment: Care must be taken to ensure that quick action couplings are either compatible with or protected from the environment (that is, surrounding conditions) to which they are exposed. Environmental conditions including but not limited to ultraviolet radiation, ozone, moisture, water, salt water, chemicals, and air pollutants can cause degradation and premature failure. 2.7 Locking Means: Ball locking quick action couplings can unintentionally disconnect if they are dragged over obstructions on the end of a hose or if the sleeve is bumped or moved enough to cause disconnect. Sleeves designed with flanges to provide better gripping for oily or gloved hands are especially susceptible to accidental disconnect and should not be used where these conditions exist. Sleeve lock or union (threaded) sleeve designs should be considered where there is a potential for accidental uncoupling. 2.8 Mechanical Loads: External forces can significantly reduce quick action couplings’ life or cause failure. Mechanical loads which must be considered include excessive tensile or side loads, and vibration. Unusual applications may require special testing prior to quick action couplings selection. 2.9 Specifications and Standards: When selecting quick action couplings, government, industry, and Parker specifications must be reviewed and followed as applicable. 2.10 Vacuum: Not all quick action couplings are suitable or recommended for vacuum service. Quick action couplings used for vacuum applications must be selected to ensure that the quick actions couplings will withstand the vacuum and pressure of the system. 2.11 Fire Resistant Fluids: Some fire resistant fluids require seals other than the standard nitrile used in many quick action couplings. 2.12 Radiant Heat: Quick action couplings can be heated to destruction or loss of sealability without contact by such nearby items as hot manifolds or molten metal. The same heat source may then initiate a fire. This can occur despite the presence of cool air around the quick action couplings. 2.13 Welding and Brazing: Heating of plated parts, including quick action couplings and port adapters, above 450°F (232°C) such as during welding, brazing, or soldering may emit deadly gases and may cause coupling seal damage. Parker Hannifin Corporation Quick Coupling Division Minneapolis, MN 55427 Appendices Appendices II-2 3.0 QUICK ACTION COUPLING INSTALLATION INSTRUCTIONS 3.1 Pre-Installation Inspection: Before installing a quick action coupling, visually inspect it and check for correct style, body material, seal material, and catalog number. Before final installation, coupling halves should be connected and disconnected with a sample of the mating half with which they will be used. 3.2 Quick Action Coupling Halves From Other Manufacturers: If a quick action coupling assembly is made up of one Parker half and one half from another manufacturer, the lowest pressure rating of the two halves should not be exceeded. 3.3 Fitting Installation: Use a thread sealant, lubricant, or a combination of both when assembling pipe thread joints in quick action couplings. Be sure the sealant is compatible with the system fluid or gas. To avoid system contamination, use a liquid or paste type sealant rather than a tape style. Use the flats provided to hold the quick action coupling when installing fittings. Do not use pipe wrenches or a vice on other parts of the coupling to hold it when installing or removing fittings as damage or loosening of threaded joints in the coupling assembly could result. Do not apply excessive torque to taper pipe threads because cracking or splitting of the female component can result. 3.4 Caps and Plugs: Use dust caps and plugs when quick action couplings are not coupled to exclude dirt and contamination and to protect critical surfaces from damage. 3.5 Coupling Location: Locate quick action couplings where they can be reached for connect or disconnect without exposing the operator to slipping, falling, getting sprayed, or coming in contact with hot or moving parts. 3.6 Hose Whips: Use a hose whip (a short length of hose between the tool and the coupling half) instead of rigidly mounting a coupling half on hand tools or other devices. This reduces the potential for coupling damage if the tool is dropped and provides some isolation from mechanical vibration which could cause uncoupling. 4.0 QUICK ACTION COUPLING MAINTENANCE INSTRUCTIONS 4.1 Even with proper selection and installation, quick action coupling life may be significantly reduced without a continuing maintenance program. Frequency should be determined by the severity of the application and risk potential. A maintenance program must be established and followed by the user and must include the following as a minimum: 4.2 Visual Inspection of Quick Action Couplings: Any of the following conditions require immediate shut down and replacement of the quick action coupling: • Cracked, damaged, or corroded quick action coupling parts. • Leaks at the fitting, valve or mating seal. • Broken coupling mounting hardware, especially breakaway clamps. 4.3 Visual Inspection All Other: The following items must be tightened, repaired or replaced as required: • Leaking seals or port connections. • Remove excess dirt buildup on the coupling locking means or on the interface area of either coupling half. • Clamps, guards, and shields. • System fluid level, fluid type and any air entrapment. 4.4 Functional Test: Operate the system at maximum operating pressure and check for possible malfunctions and freedom from leaks. Personnel must avoid potential hazardous areas while testing and using the system. 4.5 Replacement Intervals: Specific replacement intervals must be considered based on previous service life, government or industry recommendations, or when failures could result in unacceptable downtime, damage or injury risk. See instruction 1.2 above. Additional copies of the preceding safety information can be ordered by requesting “Safety Guide For Selecting and Using Quick Action Couplings and Related Accessories,” Parker Publication No. 3800-B1.0 Contact The Quick Coupling Division, Minneapolis, MN. Safety Guide Appendices Part No. Page Part No. Page Part No. Page Part No. Page Note 1. Inclusion of part numbers in this index or elsewhere in the catalog is not necessarily an indication that they are available from stock. Only items listed in the current price list are carried in stock. Parts marked as Semi-Standard, consult factory for price and delivery. 2. Catalog numbers ending in the letter W, Y, or Z are not listed in this index, as these suffixes merely designate the use of an optional seal. The item can be located in the catalog by referring to the basic number without the W, Y or Z suffix. This does not apply to SM, HP, NS, NC, FF, FS, FH, TC, and HO Series. Please see ordering information at the end of Section B. Alpha Numeric Index * Denotes parts that are offered in brass as standard, and are also on page listed. ** Semi Standard, consult factory for price & delivery. A2C.........................................A-15 A3C.........................................A-15 A8C.........................................A-15 A8CP ......................................A-15 B10-3B....................................A-10 B10-3BP .................................A-10 B10-4B....................................A-10 B10-5B....................................A-10 B10-5BP .................................A-10 B12 .........................................A-10 B12A.......................................A-10 B12E.......................................A-10 B13 .........................................A-10 B13A.......................................A-10 B13E.......................................A-10 B14 .........................................A-10 B15 .........................................A-10 B16................................A-10, A-13 B17................................A-10, A-13 B20-3B....................................A-13 B20-3BP .................................A-13 B20-4B....................................A-13 B20-5B....................................A-13 B20-5BP .................................A-13 B22 .........................................A-13 B22A.......................................A-13 B22E.......................................A-13 B23 .........................................A-13 B23A.......................................A-13 B23E.......................................A-13 B24 .........................................A-13 B25 .........................................A-13 B2C.........................................A-11 B30-3B....................................A-30 B30-3BP .................................A-30 B30-4B....................................A-30 B30-5B....................................A-30 B30-5BP .................................A-30 B32 .........................................A-29 B32A.......................................A-29 B32E.......................................A-29 B33 .........................................A-29 B33A.......................................A-29 B33E.......................................A-29 B34 .........................................A-29 B34-5B....................................A-30 B34-5BP .................................A-30 B34-6B....................................A-30 B34C.......................................A-29 B34F .......................................A-29 B35 .........................................A-29 B35C.......................................A-29 B35F .......................................A-29 B36 .........................................A-29 B36-6B....................................A-30 B36-6BP .................................A-30 B36-7B....................................A-30 B36E.......................................A-29 B36G.......................................A-29 B37 .........................................A-29 B37E.......................................A-29 B37G.......................................A-29 B38 .........................................A-29 B38-7B....................................A-30 B38-8B....................................A-30 B38J........................................A-29 B39 .........................................A-29 B39F .......................................A-29 B39J........................................A-29 B3C.........................................A-11 B50-3BP .................................A-14 B50-5BP .................................A-14 B52 .........................................A-14 B52E.......................................A-14 B53 .........................................A-14 B53E.......................................A-14 B72 .........................................A-16 B73 .........................................A-16 BG441-NBL ............................A-40 BG442-SBL.............................A-40 BG443-NBL ............................A-40 BG444-SBL.............................A-40 BH12-60L..................................B-8 BH12-60N.................................B-8 BH12-61L..................................B-8 BH12-61N.................................B-8 BH1-60......................................B-7 BH1-61......................................B-7 BH2016-60................................B-8 BH2016-61................................B-8 BH2020-60................................B-8 BH2020-61................................B-8 BH2024-60................................B-8 BH2024-61................................B-8 BH2-60......................................B-7 BH2-60-STM.............................B-9 BH2-61......................................B-7 BH2-61-STM.............................B-9 BH2C ........................................A-6 BH2E ........................................A-6 BH2F.........................................A-6 BH2G........................................A-6 BH3-60......................................B-7 BH3-61......................................B-7 BH3C ........................................A-6 BH3E ........................................A-6 BH3F.........................................A-6 BH4-60......................................B-7 BH4-60-STM.............................B-9 BH4-61......................................B-7 BH4-61-STM.............................B-9 BH5G........................................A-7 BH6-60......................................B-7 BH6-60-STM.............................B-9 BH6-61......................................B-7 BH6-61-STM.............................B-9 BH67E-60K...............................B-8 BH67E-61K...............................B-8 BH67F-60K...............................B-8 BH67F-61K...............................B-8 BH67G-60K ..............................B-8 BH67G-61K ..............................B-8 BH67J-60K ...............................B-8 BH67J-61K ...............................B-8 BH8-60......................................B-7 BH8-60-STM.............................B-9 BH8-61......................................B-7 BH8-61-STM.............................B-9 BH8CP......................................A-7 BPD323Y ................................F-23 BPD343Y ............................... F-23 BPDFS341..............................F-30 BPDFS343 ............................. F-30 BPN251F ................................B-49 BPN252F ............................... B-49 BPN253F ............................... B-49 BPN352F ............................... B-49 BPN353F ............................... B-49 BPV252.................................. B-49 BPV353.................................. B-49 BST-1 ......................................B-52 BST-10 ................................... B-52 BST-12 ................................... B-52 BST-1M .................................. B-52 BST-2 ..................................... B-52 BST-2M .................................. B-52 BST-3 ..................................... B-52 BST-3M .................................. B-52 BST-4 ..................................... B-52 BST-4M .................................. B-52 BST-6 ..................................... B-52 BST-6M .................................. B-52 BST-8 ..................................... B-52 BST-8M .................................. B-52 BST-N1....................................B-53 BST-N10................................. B-53 BST-N10M.............................. B-53 BST-N12................................. B-53 BST-N12M.............................. B-53 BST-N1M................................ B-53 BST-N2................................... B-53 BST-N2M................................ B-53 BST-N3................................... B-53 BST-N3M................................ B-53 BST-N4................................... B-53 BST-N4M................................ B-53 BST-N6................................... B-53 BST-N6M................................ B-53 BST-N8................................... B-53 BST-N8M................................ B-53 C-25 ........................................B-58 C-50 ........................................B-58 C50A01-4-4 ............................A-25 C50A02-4-4 ............................A-25 C-75 ........................................B-58 CDM01-2-2Y...........................B-57 CDM01-2-4Y.......................... B-57 CDM02-2-2Y.......................... B-57 CDM02-2-4Y.......................... B-57 CR-25 .....................................B-58 CRF01-4-4 ..............................A-19 CRF01-4-6 ..............................A-19 CRF01-4-8 ..............................A-19 CRF02-4-4 ..............................A-19 CRF02-4-6 ..............................A-19 CRFHB-4-4.............................A-19 CRFHB-4-6.............................A-19 CRFPL-4-4..............................A-19 CRFPL-4-6..............................A-19 CRFPL-4-8..............................A-19 CV-1000-MFMF.......................E-10 CV-1000-MOMS......................E-10 CV-250-MFMF.........................E-10 CV-250-MOMS........................E-10 CV-370-MFMF.........................E-10 CV-370-MOMS........................E-10 CV-500-MFMF.........................E-10 CV-500-MOMS........................E-10 CV-620-MFMF ........................E-10 CV-620-MOMS........................E-10 CV-750-MFMF.........................E-10 CV-750-MOMS .......................E-10 DC-1000 .................................E-12 DC-1000-FOFO ......................E-12 DC-1250 .................................E-12 DC-1250-FOFO ......................E-12 DC-1500 .................................E-12 DC-1500-FOFO ......................E-12 DC-2000 .................................E-12 DC-2000-FOFO ......................E-12 DC-250 ...................................E-12 DC-250-FOFO ........................E-12 DC-370 ...................................E-12 DC-370-FOFO ........................E-12 DC-500 ...................................E-12 DC-500-FOFO ........................E-12 DC-750 ...................................E-12 DC-750-FOFO ........................E-12 DM-121-2MP.......................... B-57 DM-121-2FP .......................... B-57 Parker Hannifin Corporation Quick Coupling Division III-1 Minneapolis, MN 55427 Parker Hannifin Corporation Quick Coupling Division III-2 Minneapolis, MN 55427 Appendices Appendices Part No. Page Part No. Page Part No. Page Part No. Page Alpha Numeric Index DM-121-4FP .......................... B-57 DM-121-4MP.......................... B-57 DM-122-2FP .......................... B-57 DM-122-2MP.......................... B-57 DM-122-4FP .......................... B-57 DM-122-4MP.......................... B-57 DP-50............................B-58, B-60 DT-1000-MFMF.........................E-6 DT-1000-MFMO ........................E-6 DT-1000-MOMF ........................E-6 DT-1000-MOMS........................E-7 DT-1000-MSMO........................E-7 DT-1000-MSMS ........................E-7 DT-1250-MFMF.........................E-6 DT-1250-MFMO ........................E-6 DT-1250-MOMF ........................E-6 DT-1250-MOMS........................E-7 DT-1250-MSMO........................E-7 DT-1250-MSMS ........................E-7 DT-250-MFMO ..........................E-6 DT-250-MOMF ..........................E-6 DT-250-MOMS..........................E-6 DT-370-MFMF...........................E-6 DT-370-MFMO ..........................E-6 DT-370-MOMF ..........................E-6 DT-370-MOMS..........................E-7 DT-370-MSMO..........................E-7 DT-370-MSMS ..........................E-7 DT-500-MFMF...........................E-6 DT-500-MFMO ..........................E-6 DT-500-MOMF ..........................E-6 DT-500-MOMS..........................E-7 DT-500-MSMO..........................E-7 DT-500-MSMS ..........................E-7 DT-620-MFMF...........................E-6 DT-620-MFMO ..........................E-6 DT-620-MOMF ..........................E-6 DT-620-MOMS..........................E-7 DT-620-MSMO..........................E-7 DT-620-MSMS ..........................E-7 DT-750-MFMF...........................E-6 DT-750-MFMO ..........................E-6 DT-750-MOMF ..........................E-6 DT-750-MOMS..........................E-7 DT-750-MSMO..........................E-7 DT-750-MSMS ..........................E-7 EAS-500 .................................B-22 EMA3/1/4ED ...........................F-27 EMA3/1/4NPT.........................F-27 EMA3/1/4NPT71 .................... F-27 EMA3/1/8ED ...........................F-27 EMA3/1/8NPT.........................F-27 EMA3/10X1ED........................F-27 EMA3/12X1.5ED.....................F-27 EMA3/14X1.5ED.....................F-27 EMA3/3/8ED ...........................F-27 EMA3/7/16-20UNF-2A ............F-27 EMA3/9/16-18UNF-2A ............F-27 EMA3/M8X1OR ......................F-27 EMA3VS .................................F-30 EZ-251-4FP ............................A-38 EZ-251-4HB............................A-38 EZ-251-4MP ...........................A-38 EZ-251-4PL ............................A-38 EZ-251-6FP ............................A-38 EZ-251-6HB............................A-38 EZ-251-6MP ...........................A-38 EZ-251-6PL ............................A-38 EZ304F-4T..............................A-38 EZ304F-6T..............................A-38 EZ304HB-4T...........................A-38 EZ304HB-6T...........................A-38 EZ304M-4T.............................A-38 EZ304M-6T.............................A-38 EZ304PL-4T ...........................A-38 EZ304PL-6T ...........................A-38 EZ306F-6T..............................A-38 EZ306F-8T..............................A-38 EZ306HB-6T...........................A-38 EZ306M-6T.............................A-38 EZ306PL-6T ...........................A-38 EZ308F-12T............................A-38 EZ308F-8T..............................A-38 EZ308HB-8T...........................A-38 EZ308M-8T.............................A-38 EZ308PL-8T ...........................A-38 EZ312F-12T............................A-38 EZ312F-16T............................A-38 EZ312M-12T...........................A-38 EZ-371-6FP ............................A-38 EZ-371-6HB............................A-38 EZ-371-6MP ...........................A-38 EZ-371-6PL ............................A-38 EZ-371-8FP ............................A-38 EZ-501-12FP ..........................A-38 EZ-501-8FP ............................A-38 EZ-501-8HB............................A-38 EZ-501-8MP ...........................A-38 EZ-501-8PL ............................A-38 EZ-751-12FP ..........................A-38 EZ-751-12MP .........................A-38 EZ-751-16FP ..........................A-38 FC-372-6FP ............................B-27 FC-372-8FO........................... B-27 FC-372-8FP ........................... B-27 FC-502-10FO......................... B-27 FC-502-8FP ........................... B-27 FC-752-12FO......................... B-27 FC-752-12FP ......................... B-27 FEC-502-10FO .......................B-28 FEC-502-12FO ...................... B-28 FEC-502-8FP......................... B-28 FEC-622-12FO ...................... B-28 FEC-752-12FO ...................... B-28 FEM-1001-16FO-NL...............B-26 FEM-1001-16FP-NL............... B-26 FEM-1002-16FO .................... B-26 FEM-1002-16FP .................... B-26 FEM-251-4FP-NL................... B-26 FEM-252-4FP ........................ B-26 FEM-371-6FP-NL................... B-26 FEM-371-8FO-NL .................. B-26 FEM-372-6FP ........................ B-26 FEM-372-8FO........................ B-26 FEM-501-10BMF-NL.............. B-26 FEM-501-10BMS-NL ............. B-26 FEM-501-10FO-NL.................B-26 FEM-501-12FO-NL ................ B-26 FEM-501-8FO-NL.................. B-26 FEM-501-8FP-NL .................. B-26 FEM-502-10BMS ................... B-26 FEM-502-10FO.......................B-26 FEM-502-10BMF ................... B-26 FEM-502-12FO ...................... B-26 FEM-502-8FP ........................ B-26 FEM-621-12FO-NL ................ B-26 FEM-622-12FO ...................... B-26 FEM-751-12FO-NL.................B-26 FEM-751-12FP-NL .................B-26 FEM-752-12FO.......................B-26 FEM-752-12FP .......................B-26 FER-502 .................................B-59 FER-752 .................................B-59 FF/FS-1001-TOOL ........B-24, B-32 FF/FS-251-TOOL ..........B-24, B-32 FF/FS-371-TOOL ..........B-24, B-32 FF/FS-751-TOOL ..........B-24, B-32 FF-1001-16FO ........................B-24 FF-1001-16FP ........................B-24 FF-1001-KIT ...........................B-24 FF-1001-KIT-E4 ......................B-24 FF-1001-KIT-E5 ......................B-24 FF-1002-16FO ........................B-24 FF-1002-16FP ........................B-24 FF-1002-KIT ...........................B-24 FF-1002-KIT-E4 ......................B-24 FF-1002-KIT-E5 ......................B-24 FF-251-4FP ............................B-24 FF-251-4MP............................B-24 FF-251-6F0.............................B-24 FF-251-KIT .............................B-24 FF-251-KIT-E4 ........................B-24 FF-251-KIT-E5 ........................B-24 FF-252-4FP ............................B-24 FF-252-4MP............................B-24 FF-252-6F0.............................B-24 FF-252-KIT .............................B-24 FF-252-KIT-E4 ........................B-24 FF-252-KIT-E5 ........................B-24 FF-371-6FB ............................B-24 FF-371-6FP ............................B-24 FF-371-8FB ............................B-24 FF-371-8FO ............................B-24 FF-371-8FP ............................B-24 FF-372-6FB ............................B-24 FF-372-6FP ............................B-24 FF-372-8FB ............................B-24 FF-372-8FO ............................B-24 FF-372-8FP ............................B-24 FF-372-KIT .............................B-24 FF-372-KIT-E4 ........................B-24 FF-372-KIT-E5 ........................B-24 FF-501-10FO ..........................B-24 FF-501-8FP ............................B-24 FF-502-10FO ..........................B-24 FF-502-8FP ............................B-24 FF-502-KIT .............................B-24 FF-502-KIT-E4 ........................B-24 FF-502-KIT-E5 ........................B-24 FF-751-12FO ..........................B-24 FF-751-12FP ..........................B-24 FF-751-KIT .............................B-24 FF-751-KIT-E4 ........................B-24 FF-751-KIT-E5 ........................B-24 FF-752-12FO ..........................B-24 FF-752-12FP ..........................B-24 FF-752-KIT .............................B-24 FF-752-KIT-E4 ........................B-24 FF-752-KIT-E5 ........................B-24 FH-371-6FB ............................B-30 FH-371-6FP ............................B-30 FH-371-6MP ...........................B-30 FH-372-6FB ............................B-30 FH-372-6FP ............................B-30 FR-1001..................................B-59 FR-1002..................................B-59 FR-25......................................B-59 FR-501 ..........................B-59, C-13 FR-502 ..........................B-59, C-13 FR-751....................................B-59 FR-752....................................B-59 FS-1001-16FO........................B-32 FS-1001-16FP ........................B-32 FS-1001-KIT ...........................B-32 FS-1001-KIT-E5 ......................B-32 FS-1002-16FO........................B-32 FS-1002-16FP ........................B-32 FS-1002-KIT ...........................B-32 FS-1002-KIT-E5 ......................B-32 FS-251-4FP ............................B-32 FS-251-4MP ...........................B-32 FS-251-6FO............................B-32 FS-252-4FP ............................B-32 FS-252-4MP ...........................B-32 FS-252-6FO............................B-32 FS-252-KIT .............................B-32 FS-252-KIT-E5 ........................B-32 FS-371-6FP ............................B-32 FS-371-8FO............................B-32 FS-371-KIT .............................B-32 FS-371-KIT-E5 ........................B-32 FS-372-6FP ............................B-32 FS-372-8FO............................B-32 FS-372-KIT .............................B-32 FS-372-KIT-E5 ........................B-32 FS-501-10FO..........................B-32 FS-501-8FP ............................B-32 FS-501-KIT .............................B-32 FS-501-KIT-E5 ........................B-32 FS-501-TOOL .........................B-32 FS-502-10FO..........................B-32 FS-502-8FP ............................B-32 FS-502-KIT .............................B-32 FS-502-KIT-E5 ........................B-32 FS-751-12FO..........................B-32 FS-751-12FP ..........................B-32 FS-751-KIT .............................B-32 FS-751-KIT-E5 ........................B-32 FS-752-12FO..........................B-32 FS-752-12FP ..........................B-32 FS-752-KIT .............................B-32 FS-752-KIT-E5 ........................B-32 H00E.........................................A-6 H0C...........................................A-6 H0E...........................................A-6 H0F...........................................A-6 H12-62L ....................................B-8 H12-62N ...................................B-8 H12-62-T20...............................B-8 H12-62-T24...............................B-8 H12-63L ....................................B-8 H12-63N ...................................B-8 H12-63-T20...............................B-8 H12-63-T24...............................B-8 H12-65 ....................................B-58 H12-66 ....................................B-58 H1-62 ........................................B-7 H1-62-T4...................................B-7 H1-63 ........................................B-7 H1-63-T4...................................B-7 H1-65 ......................................B-58 H1-65M...................................B-58 H1-66 ......................................B-58 H1-66M...................................B-58 H1C...........................................A-6 H1E...........................................A-6 H1F...........................................A-6 H1-*.........................................E-15 H2016-62 ..................................B-8 H2016-63 ..................................B-8 H2020-62 ..................................B-8 H2020-63 ..................................B-8 H2024-62 ..................................B-8 H2024-63 ..................................B-8 H20P-65................................. B-58 H20P-66................................. B-58 H2-62 ........................................B-7 H2-62-T6...................................B-7 H2-63 ........................................B-7 H2-63-T6...................................B-7 H2-65 ..................................... B-58 H2-65M .................................. B-58 H2-66 ..................................... B-58 H2-66M .................................. B-58 H2C...........................................A-6 H2C-E.......................................A-6 H2C-PS ..................................D-26 H2E...........................................A-6 H2E-F .......................................A-6 H2F...........................................A-6 H2F-G .............................A-6, A-11 H2G ..........................................A-6 H2G-F.......................................A-6 H2G-J .......................................A-6 H3-62 ........................................B-7 H3-62-T8...................................B-7 H3-63 ........................................B-7 H3-63-T8...................................B-7 H3-65 ..................................... B-58 H3-65M .................................. B-58 H3-66 ..................................... B-58 H3-66M .................................. B-58 H3-68 ........................................B-9 H3-69 ........................................B-9 H3C...........................................A-6 H3C-E.......................................A-6 H3E...........................................A-6 H3E-F .......................................A-6 H3F...........................................A-6 H3F-G .............................A-6, A-11 H3G ..........................................A-6 H3G-F.......................................A-6 H3G-J .......................................A-6 H4-62 ........................................B-7 H4-62-T10.................................B-7 H4-63 ........................................B-7 H4-63-T10.................................B-7 H4-65 ..................................... B-58 H4-65M .................................. B-58 H4-66 ..................................... B-58 H4-66M .................................. B-58 H4EP ........................................A-7 H4F .................................A-7, A-11 H4FP...............................A-7, A-11 H5E...........................................A-7 H5EP ........................................A-7 H5F...........................................A-7 H5F-G .............................A-7, A-11 H5FP................................A-7, A-11 H5G ..........................................A-7 H5G-F.......................................A-7 H5G-J .......................................A-7 H6-62 ........................................B-7 H6-62-T12.................................B-7 H6-63 ........................................B-7 H6-63-T12.................................B-7 H6-65 ......................................B-58 H6-65M...................................B-58 H6-66 ......................................B-58 H6-66M...................................B-58 H67A-28....................................B-8 H67C-28 ...................................B-8 H67E-62K .................................B-8 H67E-63K .................................B-8 H67F-62K .................................B-8 H67F-63K .................................B-8 H67G-62K.................................B-8 H67G-63K.................................B-8 H67J-62K..................................B-8 H67J-63K..................................B-8 H68E-67K .................................B-9 H69E-67K .................................B-9 H6E...........................................A-7 H6EP ........................................A-7 H6FP.........................................A-7 H8-62 ........................................B-7 H8-62-T16.................................B-7 H8-63 ........................................B-7 H8-63-T16.................................B-7 H8-65 ..................................... B-58 H8-65M .................................. B-58 H8-66 ..................................... B-58 H8-66M .................................. B-58 H8C...........................................A-7 H8C-D.......................................A-7 H8CP ........................................A-7 H9C...........................................A-7 H9CP ........................................A-7 HA-251-4FP............................A-25 HA-251-4MP...........................A-25 HF-121-2FP ............................A-22 HF-121-2MP ...........................A-22 HF-121-4FP.............................A-22 HF-121-4MP ...........................A-22 HF-124-2FP ............................A-22 HF-124-2MP ...........................A-22 HF-124-4FP ............................A-22 HF-124-4MP ...........................A-22 HF-251-4FP ............................A-23 HF-251-4FP-S ........................A-24 HF-251-4HB............................A-23 HF-251-4HB-S ........................A-24 HF-251-4MP ...........................A-23 HF-251-4MP-S........................A-24 HF-251-4PL ............................A-23 HF-251-4PL-S.........................A-24 HF-251-6FP ............................A-23 HF-251-6FP-S ........................A-24 HF-251-6HB............................A-23 HF-251-6HB-S ........................A-24 HF-251-6MP ...........................A-23 HF-251-6MP-S........................A-24 HF-251-6PL ............................A-23 HF-251-6PL-S.........................A-24 HF302F-2................................A-22 HF302F-4................................A-22 HF302M-2...............................A-22 HF302M-4...............................A-22 HF304F-4................................A-23 HF304F-6................................A-23 HF304HB-4.............................A-23 HF304HB-6.............................A-23 HF304M-4...............................A-23 HF304M-6...............................A-23 HF304PL-4 .............................A-23 HF304PL-6 .............................A-23 HF306F-4................................A-23 HF306F-6................................A-23 HF306F-8................................A-23 HF306HB-6.............................A-23 HF306HB-8.............................A-23 HF306M-4...............................A-23 HF306M-6...............................A-23 HF306M-8...............................A-23 HF306PL-6 .............................A-23 HF306PL-8 .............................A-23 HF-371-4FP ............................A-23 HF-371-4FP-S ........................A-24 HF-371-4MP ...........................A-23 HF-371-4MP-S........................A-24 HF-371-6FP ............................A-23 HF-371-6FP-S ........................A-24 HF-371-6HB............................A-23 HF-371-6HB-S ........................A-24 HF-371-6MP ...........................A-23 HF-371-6MP-S........................A-24 HF-371-6PL ............................A-23 HF-371-6PL-S.........................A-24 HF-371-8FP ............................A-23 HF-371-8FP-S ........................A-24 HF-371-8HB............................A-23 HF-371-8HB-S ........................A-24 HF-371-8MP ...........................A-23 HF-371-8MP-S........................A-24 HF-371-8PL ............................A-23 HF-371-8PL-S.........................A-24 HF404F-4................................A-24 HF404F-6................................A-24 HF404HB-4.............................A-24 HF404HB-6.............................A-24 HF404M-4...............................A-24 HF404M-6...............................A-24 HF404PL-4 .............................A-24 HF404PL-6 .............................A-24 HF406F-4................................A-24 HF406F-6................................A-24 HF406F-8................................A-24 HF406HB-6.............................A-24 HF406HB-8.............................A-24 HF406M-4...............................A-24 HF406M-6...............................A-24 HF406M-8...............................A-24 HF406PL-6 .............................A-24 HF406PL-8 .............................A-24 HF-501-8FP ............................A-23 HF-501-8MP ...........................A-23 HF702F-2................................A-22 HF702F-4................................A-22 HF702M-2...............................A-22 HF702M-4...............................A-22 HM1-*......................................E-15 HO-251-4FP ...........................B-55 HO-252-4FP........................... B-55 HO-371-6FP........................... B-55 HO-372-6FP........................... B-55 HO-501-8FP........................... B-55 HO-502-8FP........................... B-55 HP-1001-16FO .......................B-15 HP-1001-16FP........................B-15 HP-1002-16FO .......................B-15 HP-1002-16FP........................B-15 HP-1501-24FO .......................B-15 HP-1501-24FP........................B-15 HP-1502-24FO .......................B-15 HP-1502-24FP........................B-15 HPC-100 .......................B-15, B-59 HPC-150 .......................B-15, B-59 HPP-100........................B-15, B-59 HPP-150........................B-15, B-59 KEY-BK ...................................B-62 KEY-BU .................................. B-62 KEY-CL................................... B-62 KEY-GR.................................. B-62 KEY-NI.................................... B-62 KEY-RD.................................. B-62 L2C .........................................A-16 L3C .........................................A-16 MAV1/4NPT-MA3 ....................F-30 MAV1/4NPT-MA3-KM..............F-30 MAVMD1/4NPT-MA3...............F-30 NDM01-2-2Y...........................B-57 NDM01-2-4Y.......................... B-57 NDM02-2-2Y.......................... B-57 NDM02-2-4Y.......................... B-57 NR-100 ...................................B-59 NR-37 .....................................B-59 NR-50 .....................................B-59 NR-75 .....................................B-59 NRF01-4-4-S ..........................A-20 NRF01-4-6-S ..........................A-20 NRF02-4-4-S ..........................A-20 NRF02-4-6-S ..........................A-20 NRFHB-4-4-S .........................A-20 NRFHB-4-6-S .........................A-20 NRFPL-4-4-S ..........................A-20 NRFPL-4-6-S ..........................A-20 NS-1001-16FB........................B-21 NS-1001-16FO .......................B-21 NS-1001-16FP........................B-21 NS-1002-16FB........................B-21 NS-1002-16FO .......................B-21 NS-1002-16FP........................B-21 NS-371-6FB............................B-21 NS-371-6FP............................B-21 NS-371-8FO ...........................B-21 NS-372-6FB............................B-21 NS-372-6FP............................B-21 NS-372-8FO ...........................B-21 NS-501-10FO .........................B-21 NS-501-8FB............................B-21 NS-501-8FP............................B-21 NS-502-10FO .........................B-21 NS-502-8FB............................B-21 NS-502-8FP............................B-21 NS-751-12FB..........................B-21 NS-751-12FO .........................B-21 NS-751-12FP..........................B-21 NS-752-12FB..........................B-21 NS-752-12FO .........................B-21 NS-752-12FP..........................B-21 P200-9A..................................B-48 P200-9AY................................B-48 P201-01A................................B-48 P208-01A................................B-48 P-25 ........................................B-58 P300-11S................................B-48 P300-6 ....................................B-48 P300-9A..................................B-48 P300-9AY................................B-48 P301-01A................................B-48 P308-01A................................B-48 P308-01A-HF..........................B-48 P-50 ........................................B-58 P500-9A..................................B-48 P-75 ........................................B-58 PBH-251-4FP .........................A-34 PBH-251-4MP.........................A-34 PBH-251-6FP .........................A-34 PBH-251-6MP.........................A-34 PBH-371-4FP .........................A-34 Parker Hannifin Corporation Quick Coupling Division III-3 Minneapolis, MN 55427 Appendices Appendices Part No. Page Part No. Page Part No. Page Part No. Page Alpha Numeric Index Parker Hannifin Corporation Quick Coupling Division III-4 Minneapolis, MN 55427 Appendices Appendices Part No. Page Part No. Page Part No. Page Part No. Page Alpha Numeric Index PBH-371-4MP.........................A-34 PBH-371-6FP .........................A-34 PBH-371-6MP.........................A-34 PBH-371-8FP .........................A-34 PBS-251-4FP. .........................A-36 PBS-251-4MP.........................A-36 PBS-251-6FP..........................A-36 PBS-251-6MP.........................A-36 PBS-371-6FP..........................A-36 PBS-371-6MP.........................A-36 PBS-371-8FP..........................A-36 PBS-371-8MP.........................A-36 PBS-501-12FP........................A-36 PBS-501-6FP..........................A-36 PBS-501-8FP..........................A-36 PBS-501-8MP.........................A-36 PC204.....................................B-47 PC204AV ................................B-47 PC204AV-BP...........................B-47 PC204-BP...............................B-47 PC205.....................................B-47 PC205AV ................................B-47 PC206.....................................B-47 PC206AV ................................B-47 PC206AV-BP...........................B-47 PC206-BP...............................B-47 PC214.....................................B-48 PC214AV ................................B-48 PC214AV-BP...........................B-48 PC214-BP...............................B-48 PC215.....................................B-48 PC215AV ................................B-48 PC216.....................................B-48 PC216AV ................................B-48 PC216AV-BP...........................B-48 PC216-BP...............................B-48 PC224.....................................B-47 PC224AV ................................B-47 PC224AV-BP...........................B-47 PC224-BP...............................B-47 PC225.....................................B-47 PC225AV ................................B-47 PC226.....................................B-47 PC226AV ................................B-47 PC226AV-BP...........................B-47 PC226-BP...............................B-47 PC306.....................................B-47 PC306-BP...............................B-47 PC306V ..................................B-47 PC306V-BP.............................B-47 PC308.....................................B-47 PC308-BP...............................B-47 PC308V ..................................B-47 PC308V-BP.............................B-47 PC316.....................................B-48 PC316-BP...............................B-48 PC316V ..................................B-48 PC316V-BP.............................B-48 PC318.....................................B-48 PC318-BP...............................B-48 PC318V ..................................B-48 PC318V-BP.............................B-48 PC326.....................................B-47 PC326-BP...............................B-47 PC326V. ..................................B-47 PC326V-BP.............................B-47 PC328.....................................B-47 PC328-BP...............................B-47 PC328V ..................................B-47 PC328V-BP.............................B-47 PC500.....................................B-48 PC504.....................................B-47 PC504-BP...............................B-47 PC506.....................................B-47 PC506-BP...............................B-47 PC514.....................................B-48 PC514-BP...............................B-48 PC516.....................................B-48 PC516-BP...............................B-48 PC524.....................................B-47 PC524-BP...............................B-47 PC526.....................................B-47 PC526-BP...............................B-47 PD222.....................................F-23 PD240..............................F-5, F-23 PD242.....................................F-23 PD243.....................................F-23 PD260.....................................F-23 PD288 ....................F-9, F-19, F-29 PD3107...................................F-23 PD310BTL ..............................F-24 PD3127...................................F-23 PD312BTX..............................F-24 PD3147...................................F-23 PD322.....................................F-23 PD323.....................................F-23 PD331.....................................F-23 PD341.....................................F-23 PD342.....................................F-23 PD343.....................................F-23 PD345.....................................F-24 PD346.....................................F-24 PD34BTL ................................F-24 PD34BTX................................F-24 PD351.....................................F-23 PD355.....................................F-24 PD357.....................................F-23 PD361.....................................F-23 PD363.....................................F-23 PD365.....................................F-24 PD366.....................................F-24 PD36BTL ................................F-24 PD36BTX................................F-24 PD386.....................................F-24 PD38BTL ................................F-24 PD38BTX................................F-24 PD6-285..................................F-25 PDEMA3TA-* ..........................F-19 PDFS242 ................................F-30 PDFS-PROBE.........................F-30 PDH-19............................F-5, F-19 PDP242...................................F-25 PDP288...................................F-30 PDP323...................................F-26 PDP341.................................. F-26 PDP343.................................. F-26 PDP34BTL ............................. F-26 PDP34BTX............................. F-26 PDP361.................................. F-26 PDP36BTL ............................. F-26 PDP36BTX............................. F-26 PDPTA-*..................................F-19 PDS3-* ......................................F-9 PDSM36-*...............................F-13 PDSM45-*...............................F-13 PDTA-* ....................................F-19 PDTEMA3-* ............................F-19 PER-251-4FP .........................A-34 PER-251-4MP.........................A-34 PER-251-6FP. .........................A-34 PER-251-6MP.........................A-34 PES-251-4MP.........................A-36 PES-251-6FP..........................A-36 PF-1001-16FP ........................C-13 PF-1002-16FP ........................C-13 PF-1002-32MB .......................C-13 PF-1002-32MP .......................C-13 PF-2001-32FP ........................C-13 PF-2002-32FP ........................C-13 PF-501-8FP ............................C-13 PF-502-8FP ............................C-13 PFR-1002 ...............................C-13 PFR-1002-NS.........................C-13 PL-25 ......................................B-58 PN250.....................................B-49 PN250-25................................B-50 PN250-40................................B-50 PN250-55................................B-50 PN251.....................................B-49 PN251-25................................B-50 PN251-40................................B-50 PN251-55................................B-50 PN251-70................................B-50 PN251-85................................B-50 PN251F...................................B-49 PN251S ..................................B-49 PN252.....................................B-49 PN252-25................................B-50 PN252-40................................B-50 PN252-55................................B-50 PN252-70................................B-50 PN252-85................................B-50 PN252F...................................B-49 PN252S ..................................B-49 PN253.....................................B-49 PN253F...................................B-49 PN253S ..................................B-49 PN351-25................................B-50 PN351-40................................B-50 PN351-55................................B-50 PN351-70................................B-50 PN351-85................................B-50 PN352.....................................B-49 PN352-25................................B-50 PN352-40................................B-50 PN352-55................................B-50 PN352-70................................B-50 PN352-85................................B-50 PN352F...................................B-49 PN352S ..................................B-49 PN353.....................................B-49 PN353-25................................B-50 PN353-40................................B-50 PN353-55................................B-50 PN353-70................................B-50 PN353-85................................B-50 PN353F...................................B-49 PN353S ..................................B-49 PN354.....................................B-49 PN553.....................................B-49 PN554.....................................B-49 PN556.....................................B-49 PPA-251-4HB ...........................C-7 PPA-251-6HB ...........................C-7 PPA-253-4HBSB ......................C-7 PPA-253-6HBSB ......................C-7 PPA-252-4HB ...........................C-7 PPA-252-6HB ...........................C-7 PPA-254-4HBSB ......................C-7 PPA-254-6HBSB ......................C-7 PPL-251-H4HB.........................C-5 PPL-251-H6HB.........................C-5 PPL-251-4HB ...........................C-5 PPL-251-4MBT.........................C-4 PPL-251-4MP...........................C-4 PPL-251-5HB ...........................C-5 PPL-251-6HB ...........................C-5 PPL-251-6MBT.........................C-4 PPL-251-6MP...........................C-4 PPL-252-C4HB.........................C-6 PPL-252-C6HB.........................C-6 PPL-252-H4HB.........................C-6 PPL-252-H6HB.........................C-6 PPL-252-4HB ...........................C-6 PPL-252-4MBT.........................C-5 PPL-252-4MP...........................C-5 PPL-252-5HB ...........................C-6 PPL-252-6HB ...........................C-6 PPL-252-6MBT.........................C-5 PPL-252-6MP...........................C-5 PPL-253-4HB ...........................C-5 PPL-253-4MBT.........................C-4 PPL-253-4MP...........................C-4 PPL-253-5HB ...........................C-5 PPL-253-6HB ...........................C-5 PPL-253-6MBT.........................C-4 PPL-253-6MP...........................C-4 PPL-254-C4HB.........................C-6 PPL-254-C6HB.........................C-6 PPL-254-4HB ...........................C-6 PPL-254-4MBT.........................C-5 PPL-254-4MP...........................C-5 PPL-254-5HB ...........................C-6 PPL-254-6HB ...........................C-6 PPL-254-6MBT.........................C-5 PPL-254-6MP...........................C-5 PPM-121-H2HB........................C-5 PPM-121-H3HB........................C-5 PPM-121-H4HB........................C-5 PPM-121-2HB ..........................C-5 PPM-121-2MBT........................C-4 PPM-121-2MP..........................C-4 PPM-121-3HB ..........................C-5 PPM-121-4HB ..........................C-5 PPM-121-4MBT........................C-4 PPM-121-4MP..........................C-4 PPM-122-C2HB........................C-6 PPM-122-C4HB........................C-6 PPM-122-H2HB........................C-6 PPM-122-H3HB........................C-6 PPM-122-H4HB........................C-6 PPM-122-2HB ..........................C-6 PPM-122-2MBT........................C-5 PPM-122-2MP..........................C-5 PPM-122-3HB ..........................C-6 PPM-122-4HB ..........................C-6 PPM-122-4MBT........................C-5 PPM-122-4MP..........................C-5 PPM-123-2HB ..........................C-5 PPM-123-2MBT........................C-4 PPM-123-2MP..........................C-4 PPM-123-3HB ..........................C-5 PPM-123-4HB ..........................C-5 PPM-123-4MBT........................C-4 PPM-123-4MP..........................C-4 PPM-124-C2HB........................C-6 PPM-124-C4HB........................C-6 PPM-124-H3HB........................C-6 PPM-124-2HB ..........................C-6 PPM-124-2MBT........................C-5 PPM-124-2MP..........................C-5 PPM-124-3HB ..........................C-6 PPM-124-4HB ..........................C-6 PPM-124-4MBT........................C-5 PPM-124-4MP..........................C-5 PR-25......................................B-58 PS1210102-12-12 ....................D-6 PS1210103-12-12 ....................D-6 PS1210106-12-12 ....................D-6 PS1210110-12-12 ....................D-7 PS1210202-12-12 ....................D-7 PS1210203-12-12 ....................D-7 PS1210206-12-12 ....................D-8 PS1210210-12-12 ....................D-8 PS1210302-12-12 ....................D-8 PS1210303-12-12 ....................D-9 PS1210306-12-12 ....................D-9 PS1210310-12-12 ....................D-9 PS1210502-12-12 ..................D-10 PS1210503-12-12 ..................D-10 PS1210506-12-12 ..................D-10 PS1210510-12-12 ..................D-10 PS1211002-12-12 ..................D-11 PS1211003-12-12 ..................D-11 PS1211006-12-12 ..................D-11 PS1211010-12-12 ..................D-11 PS1290102-12-12 ..................D-12 PS1290103-12-12 ..................D-12 PS1290105-12-12 ..................D-13 PS1290106-12-12 ..................D-13 PS1290107-12-12 ..................D-13 PS1290110-12-12 ..................D-13 PS1290202-12-12 ..................D-14 PS1290203-12-12 ..................D-14 PS1290205-12-12 ..................D-15 PS1290206-12-12 ..................D-15 PS1290207-12-12 ..................D-15 PS1290210-12-12 ..................D-15 PS1290302-12-12 ..................D-16 PS1290303-12-12 ..................D-16 PS1290305-12-12 ..................D-16 PS1290306-12-12 ..................D-16 PS1290307-12-12 ..................D-16 PS1290310-12-12 ..................D-16 PS1290502-12-12 ..................D-16 PS1290503-12-12 ..................D-18 PS1290505-12-12 ..................D-18 PS1290506-12-12 ..................D-18 PS1290507-12-12 ..................D-18 PS1290510-12-12 ..................D-19 PS1291002-12-12 ..................D-19 PS1291003-12-12 ..................D-19 PS1291005-12-12 ..................D-19 PS1291006-12-12 ..................D-20 PS1291007-12-12 ..................D-20 PS1291010-12-12 ..................D-20 PS12A-RPR............................D-21 PS12-RPR..............................D-21 PS12W-RPR...........................D-21 PS12Y-RPR ............................D-21 PS1610102-16-16 ....................D-6 PS1610103-16-16 ....................D-6 PS1610106-16-16 ....................D-6 PS1610110-16-16 ....................D-7 PS1610202-16-16 ....................D-7 PS1610203-16-16 ....................D-7 PS1610206-16-16 ....................D-8 PS1610210-16-16 ....................D-8 PS1610302-16-16 ....................D-8 PS1610303-16-16 ....................D-9 PS1610306-16-16 ....................D-9 PS1610310-16-16 ....................D-9 PS1610502-16-16 ..................D-10 PS1610503-16-16 ..................D-10 PS1610506-16-16 ..................D-10 PS1610510-16-16 ..................D-10 PS1611002-16-16 ..................D-11 PS1611003-16-16 ..................D-11 PS1611006-16-16 ..................D-11 PS1611010-16-16 ..................D-11 PS1690102-16-16 ..................D-12 PS1690103-16-16 ..................D-12 PS1690105-16-16 ..................D-13 PS1690106-16-16 ..................D-13 PS1690107-16-16 ..................D-13 PS1690110-16-16 ..................D-13 PS1690202-16-16 ..................D-14 PS1690203-16-16 ..................D-14 PS1690205-16-16 ..................D-14 PS1690206-16-16 ..................D-14 PS1690207-16-16 ..................D-14 PS1690210-16-16 ..................D-14 PS1690302-16-16 ..................D-16 PS1690303-16-16 ..................D-16 PS1690305-16-16 ..................D-16 PS1690306-16-16 ..................D-17 PS1690307-16-16 ..................D-17 PS1690310-16-16 ..................D-17 PS1690502-16-16 ..................D-17 PS1690503-16-16 ..................D-18 PS1690505-16-16 ..................D-18 PS1690506-16-16 ..................D-18 PS1690507-16-16 ..................D-18 PS1690510-16-16 ..................D-19 PS1691002-16-16 ..................D-19 PS1691003-16-16 ..................D-19 PS1691005-16-16. .................D-19 PS1691006-16-16 ..................D-20 PS1691007-16-16 ..................D-20 PS1691010-16-16 ..................D-20 PS16A-RPR............................D-21 PS16-RPR..............................D-21 PS16W-RPR...........................D-21 PS16Y-RPR ............................D-21 PS2410202-20-20 ....................D-7 PS2410202-24-24 ....................D-7 PS2410203-20-20 ....................D-7 PS2410203-24-24 ....................D-7 PS2410302-20-20 ....................D-8 PS2410302-24-24 ....................D-8 PS2410303-20-20 ....................D-9 PS2410303-24-24 ....................D-9 PS2410310-20-20 ....................D-9 PS2410310-24-24 ....................D-9 PS2411010-20-20 ..................D-11 PS2411010-24-24 ..................D-11 PS2490202-20-20 ..................D-14 PS2490202-24-24 ..................D-14 PS2490203-20-20 ..................D-14 PS2490203-24-24 ..................D-14 PS2490210-20-20 ..................D-15 PS2490210-24-24 ..................D-15 PS2490302-20-20 ..................D-16 PS2490302-24-24 ..................D-16 PS2490303-20-20 ..................D-16 PS2490303-24-24 ..................D-16 PS2491010-20-20 ..................D-20 PS2491010-24-24 ..................D-20 PS3210202-32-32 ....................D-7 PS3210203-32-32 ....................D-8 PS3210302-32-32 ....................D-8 PS3210303-32-32 ....................D-9 PS3210310-32-32 ....................D-9 PS3211010-32-32 ..................D-11 PS3290202-32-32 ..................D-14 PS3290203-32-32 ..................D-14 PS3290210-32-32 ..................D-15 PS3290302-32-32 ..................D-16 PS3290303-32-32 ..................D-16 PS3291010-32-32 ..................D-20 PS410102-4-4 ..........................D-6 PS410103-4-4 ..........................D-6 PS410106-4-4 ..........................D-6 PS410110-4-4 ..........................D-7 PS410202-4-4 ..........................D-7 PS410203-4-4 ..........................D-8 PS410206-4-4 ..........................D-8 PS410210-4-4 ..........................D-8 PS410302-4-4 ..........................D-8 PS410303-4-4 ..........................D-9 PS410306-4-4 ..........................D-9 PS410310-4-4 ..........................D-9 PS410502-4-4 ........................D-10 PS410503-4-4 ........................D-10 PS410506-4-4 ........................D-10 PS410510-4-4 ........................D-10 PS411002-4-4 ........................D-11 PS411003-4-4 ........................D-11 PS411006-4-4 ........................D-11 PS411010-4-4 ........................D-11 PS490102-4-4 ........................D-12 PS490103-4-4 ........................D-12 PS490105-4-4 ........................D-13 PS490106-4-4 ........................D-13 PS490107-4-4 ........................D-13 PS490110-4-4 ........................D-13 PS490202-4-4 ........................D-14 PS490203-4-4 ........................D-14 PS490205-4-4 ........................D-15 PS490206-4-4 ........................D-15 PS490207-4-4 ........................D-15 PS490210-4-4 ........................D-15 PS490302-4-4 ........................D-16 PS490303-4-4 ........................D-16 PS490305-4-4 ........................D-16 PS490306-4-4 ........................D-17 PS490307-4-4 ........................D-17 PS490310-4-4 ........................D-17 PS490502-4-4 ........................D-17 PS490503-4-4 ........................D-18 PS490505-4-4 ........................D-18 PS490506-4-4 ........................D-18 PS490507-4-4 ........................D-18 PS490510-4-4 ........................D-19 PS491002-4-4 ........................D-19 PS491003-4-4 ........................D-19 PS491005-4-4 ........................D-19 PS491006-4-4 ........................D-20 PS491007-4-4 ........................D-20 PS491010-4-4 ........................D-20 PS4A-RPR..............................D-21 PS4-RPR................................D-21 PS4W-RPR.............................D-21 PS4Y-RPR ..............................D-21 PS610102-6-6 ..........................D-6 PS610103-6-6 ..........................D-6 PS610106-6-6 ..........................D-6 PS610110-6-6 ..........................D-7 PS610202-6-6 ..........................D-7 PS610203-6-6 ..........................D-8 PS610206-6-6 ..........................D-8 PS610210-6-6 ..........................D-8 PS610302-6-6 ..........................D-8 PS610303-6-6 ..........................D-9 PS610306-6-6 ..........................D-9 PS610310-6-6 ..........................D-9 PS610502-6-6 ........................D-10 PS610503-6-6 ........................D-10 PS610506-6-6 ........................D-10 PS610510-6-6 ........................D-10 PS611002-6-6 ........................D-11 PS611003-6-6 ........................D-11 PS611006-6-6 ........................D-11 PS611010-6-6 ........................D-11 PS690102-6-6 ........................D-12 PS690103-6-6 ........................D-12 PS690105-6-6 ........................D-13 PS690106-6-6 ........................D-13 PS690107-6-6 ........................D-13 PS690110-6-6 ........................D-13 PS690202-6-6 ........................D-14 PS690203-6-6 ........................D-14 PS690205-6-6 ........................D-15 PS690206-6-6 ........................D-15 PS690207-6-6 ........................D-15 PS690210-6-6 ........................D-15 PS690302-6-6 ........................D-16 PS690303-6-6 ........................D-16 PS690305-6-6 ........................D-16 PS690306-6-6 ........................D-17 PS690307-6-6 ........................D-17 PS690310-6-6 ........................D-17 PS690502-6-6 ........................D-17 PS690503-6-6 ........................D-18 PS690505-6-6 ........................D-18 PS690506-6-6 ........................D-18 PS690507-6-6 ........................D-18 PS690510-6-6 ........................D-19 PS691002-6-6 ........................D-20 PS691003-6-6 ........................D-20 PS691005-6-6 ........................D-20 PS691006-6-6 ........................D-20 PS691007-6-6 ........................D-20 PS691010-6-6 ........................D-20 PS6A-RPR..............................D-21 PS6-RPR................................D-21 PS6W-RPR.............................D-21 PS6Y-RPR ..............................D-21 PS810102-8-8 ..........................D-6 PS810103-8-8 ..........................D-6 PS810106-8-8 ..........................D-6 PS810110-8-8 ..........................D-7 PS810202-8-8 ..........................D-7 PS810203-8-8 ..........................D-7 PS810206-8-8 ..........................D-8 PS810210-8-8 ..........................D-8 PS810302-8-8 ..........................D-8 PS810303-10-10 ......................D-9 PS810303-8-8 ..........................D-9 PS810306-8-8 ..........................D-9 PS810310-8-8 ..........................D-9 PS810502-8-8 ........................D-10 PS810503-10-10 ....................D-10 PS810503-8-8 ........................D-10 PS810506-8-8 ........................D-10 PS810510-8-8 ........................D-10 PS811002-8-8 ........................D-11 PS811003-8-8 ........................D-11 PS811006-8-8 ........................D-11 PS811010-8-8 ........................D-11 Parker Hannifin Corporation Quick Coupling Division III-5 Minneapolis, MN 55427 Appendices Appendices Part No. Page Part No. Page Part No. Page Part No. Page Alpha Numeric Index Parker Hannifin Corporation Quick Coupling Division III-6 Minneapolis, MN 55427 Appendices Appendices Part No. Page Part No. Page Part No. Page Part No. Page Alpha Numeric Index PS890102-8-8 ........................D-12 PS890103-8-8 ........................D-12 PS890105-8-8 ........................D-13 PS890106-8-8 ........................D-13 PS890107-8-8 ........................D-13 PS890110-8-8 ........................D-13 PS890202-8-8 ........................D-14 PS890203-8-8 ........................D-14 PS890205-8-8 ........................D-15 PS890206-8-8 ........................D-15 PS890207-8-8 ........................D-15 PS890210-8-8 ........................D-15 PS890302-8-8 ........................D-16 PS890303-10-10 ....................D-16 PS890303-8-8 ........................D-16 PS890305-8-8 ........................D-16 PS890306-8-8 ........................D-17 PS890307-8-8 ........................D-17 PS890310-8-8 ........................D-17 PS890502-8-8 ........................D-17 PS890503-10-10 ....................D-18 PS890503-8-8 ........................D-18 PS890505-8-8 ........................D-18 PS890506-8-8 ........................D-18 PS890507-8-8 ........................D-18 PS890510-8-8 ........................D-19 PS891002-8-8 ........................D-19 PS891003-8-8 ........................D-19 PS891005-8-8 ........................D-19 PS891006-8-8 ........................D-20 PS891007-8-8 ........................D-20 PS891010-8-8 ........................D-20 PS8A-RPR..............................D-21 PS8-RPR................................D-21 PS8W-RPR.............................D-21 PS8Y-RPR ..............................D-21 PV-*.........................................E-16 RF-251-4FP ............................A-19 RF-251-4HB............................A-19 RF-251-4MP ...........................A-19 RF-251-4PL ............................A-19 RF-251-6FP ............................A-19 RF-251-6HB............................A-19 RF-251-6MP ...........................A-19 RF-251-6PL ............................A-19 RF-251-8MP ...........................A-19 RF-251-8PL ............................A-19 RF-254-4FP ............................A-20 RF-254-4HB............................A-20 RF-254-4MP ...........................A-20 RF-254-4PL ............................A-20 RF-254-6FP ............................A-20 RF-254-6HB............................A-20 RF-254-6MP ...........................A-20 RF-254-6PL ............................A-20 RF-371-6FP ............................A-19 RF-371-6HB............................A-19 RF-371-6MP ...........................A-19 RF-371-6PL ............................A-19 RF-371-8FP ............................A-19 RF-371-8HB............................A-19 RF-371-8MP ...........................A-19 RF-371-8PL ............................A-19 RF-374-6FP ............................A-20 RF-374-6HB............................A-20 RF-374-6MP ...........................A-20 RF-374-6PL ............................A-20 RF-374-8FP ............................A-20 RF-374-8HB............................A-20 RF-374-8MP ...........................A-20 RF-374-8PL ............................A-20 RK-12E...................................D-28 RK-12N...................................D-28 RK-12V...................................D-28 RK-16E...................................D-28 RK-16N...................................D-28 RK-16V...................................D-28 RK-4/6E ..................................D-28 RK-4/6N..................................D-28 RK-4/6V ..................................D-28 RK-8E.....................................D-28 RK-8N.....................................D-28 RK-8V.....................................D-28 S2101-12-12...........................D-24 S2101-4-4...............................D-24 S2101-6-6...............................D-24 S2101-8-8...............................D-24 S2102-12-12...........................D-24 S2102-4-4...............................D-24 S2102-6-6...............................D-24 S2102-8-8...............................D-24 S2103-12-12...........................D-24 S2103-16-16...........................D-24 S2103-4-4...............................D-24 S2103-6-6...............................D-24 S2103-8-8...............................D-24 S2107-12-12...........................D-24 S2107-16-16...........................D-24 S2107-4-4...............................D-24 S2107-6-6...............................D-24 S2107-8-8...............................D-24 S2110-12-12...........................D-24 S2110-6-6...............................D-24 S2110-8-8...............................D-24 S22 .........................................A-13 S2201-12-12 .......................... D-25 S2201-4-4 .............................. D-25 S2201-6-6 .............................. D-25 S2201-8-8 .............................. D-25 S2202-12-12 .......................... D-25 S2202-4-4 .............................. D-25 S2202-6-6...............................D-25 S2202-8-8 .............................. D-25 S2203-12-12 .......................... D-25 S2203-16-16 .......................... D-25 S2203-4-4 .............................. D-25 S2203-6-6 .............................. D-25 S2203-8-8 .............................. D-25 S2207-12-12 .......................... D-25 S2207-16-16 .......................... D-25 S2207-4-4 .............................. D-25 S2207-6-6 .............................. D-25 S2207-8-8 .............................. D-25 S2210-12-12 .......................... D-25 S2210-6-6 .............................. D-25 S2210-8-8 .............................. D-25 S23 .........................................A-13 S2301-12-12...........................D-26 S2301-4-4 .............................. D-26 S2301-6-6 .............................. D-26 S2301-8-8 .............................. D-26 S2302-12-12 .......................... D-26 S2302-4-4 .............................. D-26 S2302-6-6 .............................. D-26 S2302-8-8 .............................. D-26 S2303-10-10 .......................... D-26 S2303-12-12 .......................... D-26 S2303-16-16 .......................... D-26 S2303-4-4 .............................. D-26 S2303-6-6 .............................. D-26 S2303-8-8 .............................. D-26 S2307-12-12 .......................... D-26 S2307-4-4 .............................. D-26 S2307-6-6 .............................. D-26 S2307-8-8 .............................. D-26 S2310-12-12 .......................... D-26 S2310-6-6 .............................. D-26 S2310-8-8 .............................. D-26 S2501-12-12...........................D-27 S2501-6-6 .............................. D-27 S2501-8-8 .............................. D-27 S2502-12-12 .......................... D-27 S2502-6-6 .............................. D-27 S2502-8-8 .............................. D-27 S2503-10-10 .......................... D-27 S2503-12-12 .......................... D-27 S2503-16-16 .......................... D-27 S2503-6-6 .............................. D-27 S2503-8-8 .............................. D-27 S2507-12-12 .......................... D-27 S2507-16-16 .......................... D-27 S2507-6-6 .............................. D-27 S2507-8-8 .............................. D-27 S2510-12-12 .......................... D-27 S2510-6-6 .............................. D-27 S2510-8-8 .............................. D-27 S2-ACV-02-FP ..........................C-9 S2-ACV-02-MP .........................C-9 S2-ACV-03-BHB .......................C-9 S2-ACV-03-HB..........................C-9 S2-ACV-04-BHB .......................C-9 S2-ACV-04-FP ..........................C-9 S2-ACV-04-HB..........................C-9 S2-ACV-04-MP .........................C-9 S2-ANS-02-FP........................C-10 S2-ANS-02-MP.......................C-10 S2-ANS-03-BHB.....................C-10 S2-ANS-03-HB .......................C-10 S2-ANS-04-BHB.....................C-10 S2-ANS-04-FP........................C-10 S2-ANS-04-HB .......................C-10 S2-ANS-04-MP.......................C-10 S2-ANV-02-FP........................C-11 S2-ANV-02-MP .......................C-11 S2-ANV-03-BHB .....................C-11 S2-ANV-03-HB .......................C-11 S2-ANV-04-BHB .....................C-11 S2-ANV-04-FP........................C-11 S2-ANV-04-HB .......................C-11 S2-ANV-04-MP .......................C-11 S2-APV-02-FP ..........................C-9 S2-APV-03-HB..........................C-9 S2-APV-04-FP ..........................C-9 S2-APV-04-HB..........................C-9 S2C.........................................A-11 S2-PCV-02-FP..........................C-9 S2-PCV-02-MP .........................C-9 S2-PCV-03-BHB .......................C-9 S2-PCV-03-HB .........................C-9 S2-PCV-04-BHB .......................C-9 S2-PCV-04-FP..........................C-9 S2-PCV-04-HB .........................C-9 S2-PCV-04-MP .........................C-9 S2-PNS-02-FP........................C-10 S2-PNS-02-MP.......................C-10 S2-PNS-03-BHB.....................C-10 S2-PNS-03-HB .......................C-10 S2-PNS-04-BHB.....................C-10 S2-PNS-04-FP........................C-10 S2-PNS-04-HB .......................C-10 S2-PNS-04-MP.......................C-10 S2-PNV-02-FP........................C-11 S2-PNV-02-MP .......................C-11 S2-PNV-03-BHB .....................C-11 S2-PNV-03-HB .......................C-11 S2-PNV-04-BHB .....................C-11 S2-PNV-04-FP........................C-11 S2-PNV-04-HB .......................C-11 S2-PNV-04-MP .......................C-11 S2-PPV-02-FP ..........................C-9 S2-PPV-03-HB..........................C-9 S2-PPV-04-FP ..........................C-9 S2-PPV-04-HB..........................C-9 S6-ACV-04-FP ..........................C-9 S6-ACV-04-HB..........................C-9 S6-ACV-04-MP .........................C-9 S6-ACV-06-FP ..........................C-9 S6-ACV-06-HB..........................C-9 S6-ACV-06-MP .........................C-9 S6-ACV-08-FP ..........................C-9 S6-ACV-08-HB..........................C-9 S6-ACV-08-MP .........................C-9 S6-ANS-04-FP........................C-10 S6-ANS-04-HB .......................C-10 S6-ANS-04-MP.......................C-10 S6-ANS-06-FP........................C-10 S6-ANS-06-HB .......................C-10 S6-ANS-06-MP.......................C-10 S6-ANS-08-FP........................C-10 S6-ANS-08-HB .......................C-10 S6-ANS-08-MP.......................C-10 S6-ANV-04-FP........................C-11 S6-ANV-04-HB .......................C-11 S6-ANV-04-MP .......................C-11 S6-ANV-06-FP........................C-11 S6-ANV-06-HB .......................C-11 S6-ANV-06-MP .......................C-11 S6-ANV-08-FP........................C-11 S6-ANV-08-HB .......................C-11 S6-ANV-08-MP .......................C-11 S6-KCV-04-FP..........................C-9 S6-KCV-04-HB .........................C-9 S6-KCV-04-MP .........................C-9 S6-KCV-06-FP..........................C-9 S6-KCV-06-HB .........................C-9 S6-KCV-06-MP .........................C-9 S6-KCV-08-FP..........................C-9 S6-KCV-08-HB .........................C-9 S6-KCV-08-MP .........................C-9 S6-KNV-04-FP........................C-11 S6-KNV-04-HB .......................C-11 S6-KNV-04-MP .......................C-11 S6-KNV-06-FP........................C-11 S6-KNV-06-HB .......................C-11 S6-KNV-06-MP .......................C-11 S6-KNV-08-FP........................C-11 S6-KNV-08-HB .......................C-11 S6-KNV-08-MP .......................C-11 S6-PCV-04-FP..........................C-9 S6-PCV-04-HB .........................C-9 S6-PCV-04-MP .........................C-9 S6-PCV-06-FP..........................C-9 S6-PCV-06-HB .........................C-9 S6-PCV-06-MP .........................C-9 S6-PCV-08-FP..........................C-9 S6-PCV-08-HB .........................C-9 S6-PCV-08-MP .........................C-9 S6-PNS-04-FP........................C-10 S6-PNS-04-HB .......................C-10 S6-PNS-04-MP.......................C-10 S6-PNS-06-FP........................C-10 S6-PNS-06-HB .......................C-10 S6-PNS-06-MP.......................C-10 S6-PNS-08-FP........................C-10 S6-PNS-08-HB .......................C-10 S6-PNS-08-MP.......................C-10 S6-PNV-04-FP........................C-11 S6-PNV-04-HB .......................C-11 S6-PNV-04-MP .......................C-11 S6-PNV-06-FP........................C-11 S6-PNV-06-HB .......................C-11 S6-PNV-06-MP .......................C-11 S6-PNV-08-FP........................C-11 S6-PNV-08-HB .......................C-11 S6-PNV-08-MP .......................C-11 SAE-500 .................................B-22 SC-690....................................F-19 SCA-1/2-EMA-3 ......................F-30 SCA-7/16-EMA-3 ......................F-5 SCC-110 ...................................F-5 SCC-150..........................F-5, F-19 SC-CD 4082 ..................F-18, F-21 SCFT-*.....................................F-20 SCJA-1/4...................................F-5 SCJR-0250-4MP.......................F-5 SCJR-0250-EMA ......................F-5 SCJR-0250-PD .........................F-5 SCJR-1500-4MP.......................F-5 SCJR-1500-PD .........................F-5 SCJR-1500-EMA ......................F-5 SCJR-5800-4MP.......................F-5 SCJR-5800-EMA ......................F-5 SCJR-5800-PD .........................F-5 SCJR-8700-4MP.......................F-5 SCJR-8700-EMA ......................F-5 SCJR-8700-PD .........................F-5 SCK-102-03-02..............F-18, F-21 SCK-102-05-12..............F-18, F-21 SCK-313-02-31............. F-18, F-21 SCK-315-02-34 ....F-15, F-17, F-18 SCM-152-2-02............F-6, F-7, F-8 SCM-340-2-02 ........................F-14 SCM-450-1-01.......F-10, F-11, F-I2 SCMA-VADC-600 ..........F-18, F-21 SCRPM-220.................. F-18, F-21 SCRPMA-001 ............... F-18, F-21 SCRPMA-002................F-18, F-21 SCSN-450...............................F-18 SCSW-KIT-152..............F-18, F-21 SCT-150-04-02 ..............F-18, F-21 SCTA-1/4 .......................F-18, F-21 SH12-62L..................................B-8 SH12-62N.................................B-8 SH12-62-T20 ............................B-8 SH12-62-T24 ............................B-8 SH12-63L..................................B-8 SH12-63N.................................B-8 SH12-63-T20 ............................B-8 SH12-63-T24 ............................B-8 SH1-62......................................B-7 SH1-62-T4 ................................B-7 SH1-63......................................B-7 SH1-63-T4 ................................B-7 SH2016-62................................B-8 SH2016-63................................B-8 SH2020-62................................B-8 SH2020-63................................B-8 SH2024-62................................B-8 SH2024-63................................B-8 SH2-62......................................B-7 SH2-62-T6 ................................B-7 SH2-63......................................B-7 SH2-63-T6 ................................B-7 SH2C ........................................A-6 SH2C-E.....................................A-6 SH3-62......................................B-7 SH3-62-T8 ................................B-7 SH3-63......................................B-7 SH3-63-T8 ................................B-7 SH3C ........................................A-6 SH3C-E.....................................A-6 SH4-62......................................B-7 SH4-62-T10 ..............................B-7 SH4-63......................................B-7 SH4-63-T10 ..............................B-7 SH6-62......................................B-7 SH6-62-T12 ..............................B-7 SH6-63......................................B-7 SH6-63-T12 ..............................B-7 SH67E-62K...............................B-8 SH67E-63K...............................B-8 SH67F-62K...............................B-8 SH67F-63K...............................B-8 SH67G-62K ..............................B-8 SH67G-63K ..............................B-8 SH67J-62K ...............................B-8 SH67J-63K ...............................B-8 SH8-62......................................B-7 SH8-62-T16 ..............................B-7 SH8-63......................................B-7 SH8-63-T16 ..............................B-7 SH8C ........................................A-7 SH9C ........................................A-7 SM-251-4FB ...........................B-13 SM-251-4FP ...........................B-13 SM-251-6FB ...........................B-13 SM-251-6FO...........................B-13 SM-251-6FP ...........................B-13 SM-252-4FB ...........................B-13 SM-252-4FP ...........................B-13 SM-252-6FB ...........................B-13 SM-252-6FO...........................B-13 SM-252-6FP ...........................B-13 SM-501-12FB .........................B-13 SM-501-12FP .........................B-13 SM-501-8FB ...........................B-13 SM-501-8FO...........................B-13 SM-501-8FP ...........................B-13 SM-502-12FB .........................B-13 SM-502-12FP .........................B-13 SM-502-8FB ...........................B-13 SM-502-8FO...........................B-13 SM-502-8FP ...........................B-13 SM-751-12FB .........................B-13 SM-751-12FO.........................B-13 SM-751-12FP .........................B-13 SM-751-16FB .........................B-13 SM-751-16FO.........................B-13 SM-751-16FP .........................B-13 SM-752-12FB .........................B-13 SM-752-12FO.........................B-13 SM-752-12FP .........................B-13 SM-752-16FB .........................B-13 SM-752-16FO.........................B-13 SM-752-16FP .........................B-13 SMA3-200...............................F-33 SMA3-2000.............................F-33 SMA3-400........................F-5, F-33 SMA3-4000.............................F-33 SMA3-800...............................F-33 SSH12-62LY .............................B-8 SSH12-62NY ............................B-8 SSH12-62Y-T20........................B-8 SSH12-62Y-T24........................B-8 SSH12-63LY .............................B-8 SSH12-63NY ............................B-8 SSH12-63Y-T20........................B-8 SSH12-63Y-T24........................B-8 SSH1-62Y.................................B-7 SSH1-62Y-T4............................B-7 SSH1-63Y.................................B-7 SSH1-63Y-T4............................B-7 SSH2016-62Y...........................B-8 SSH2016-63Y...........................B-8 SSH2020-62Y...........................B-8 SSH2020-63Y...........................B-8 SSH2024-62Y...........................B-8 SSH2024-63Y...........................B-8 SSH2-62Y.................................B-7 SSH2-62Y-T6............................B-7 SSH2-63Y.................................B-7 SSH2-63Y-T6............................B-7 SSH3-62Y.................................B-7 SSH3-62Y-T8............................B-7 SSH3-63Y.................................B-7 SSH3-63Y-T8............................B-7 SSH4-62Y.................................B-7 SSH4-62Y-T10..........................B-7 SSH4-63Y.................................B-7 SSH4-63Y-T10..........................B-7 SSH6-62Y.................................B-7 SSH6-62Y-T12..........................B-7 SSH6-63Y.................................B-7 SSH6-63Y-T12..........................B-7 SSH67E-62KY..........................B-8 SSH67E-63KY..........................B-8 SSH67F-62KY ..........................B-8 SSH67F-63KY ..........................B-8 SSH67G-62KY..........................B-8 SSH67G-63KY..........................B-8 SSH67J-62KY...........................B-8 SSH67J-63KY...........................B-8 SSH8-62Y.................................B-7 SSH8-62Y-T16..........................B-7 SSH8-63Y.................................B-7 SSH8-63Y-T16..........................B-7 SSPD242Y..............................F-23 SSPD343Y..............................F-23 SST-1 ......................................B-52 SST-2 ......................................B-52 SST-3 ......................................B-52 SST-4 ......................................B-52 SST-6 ......................................B-52 SST-8 ......................................B-52 SST-1M ...................................B-52 SST-2M ...................................B-52 SST-3M ...................................B-52 SST-4M ...................................B-52 SST-6M ...................................B-52 SST-8M ...................................B-52 SST-N1....................................B-53 SST-N1M.................................B-53 SST-N2....................................B-53 SST-N2M.................................B-53 SST-N3....................................B-53 SST-N3M.................................B-53 SST-N4....................................B-53 SST-N4M.................................B-53 SST-N6....................................B-53 SST-N6M.................................B-53 SST-N8....................................B-53 SST-N8M.................................B-53 ST-N1......................................B-53 ST-N1M...................................B-53 ST-N2......................................B-53 ST-N2M...................................B-53 ST-N3......................................B-53 ST-N3M...................................B-53 ST-N4......................................B-53 ST-N4M...................................B-53 ST-N6......................................B-53 ST-N6M...................................B-53 ST-N8......................................B-53 ST-N8M...................................B-53 TC-371....................................B-44 TC-372....................................B-44 TH-1000-16FO........................E-18 TL-251-4FP.............................A-32 TL-251-4MP............................A-32 TL-251-6MP............................A-32 TL-254-2FP.............................A-32 TL-254-2MP............................A-32 TL-254-4FP.............................A-32 TL-254-4HB ............................A-32 TL-254-4MP............................A-32 TL-254-6HB ............................A-32 TL-501-12FP...........................A-32 TL-501-6FP.............................A-32 TL-501-6MP............................A-32 TL-501-8FP.............................A-32 TL-501-8MP............................A-32 TL-504-12MP..........................A-32 TL-504-4FP.............................A-32 TL-504-4HB ............................A-32 TL-504-4MP............................A-32 TL-504-6FP.............................A-32 TL-504-6HB ............................A-32 TL-504-6MP............................A-32 TL-504-8HB ............................A-32 TL-504-8MP............................A-32 TR-37 ............................B-58, B-60 UC-251-4FP............................A-26 UC-251-4MP...........................A-26 UC-251-6FP............................A-26 UC-251-6MP...........................A-26 UC304F-4 ...............................A-26 UC-304M-4 .............................A-26 UC-340F-6 ..............................A-26 UC340M-6 ..............................A-26 0C ...........................................A-11 0E ...........................................A-11 0F............................................A-11 1095-0020...............................A-32 1095-0040...............................A-32 1096-0010...............................A-32 1097-0010...............................A-32 1098-0010...............................A-32 1141-62...................................B-45 1141-63...................................B-45 1163-60...................................B-54 1163-61...................................B-54 1261-0020...............................A-32 14............................................A-10 14-5B ......................................A-10 14-5BP....................................A-10 1461-0050...............................A-32 Parker Hannifin Corporation Quick Coupling Division III-7 Minneapolis, MN 55427 Appendices Appendices Part No. Page Part No. Page Part No. Page Part No. Page Alpha Numeric Index Parker Hannifin Corporation Quick Coupling Division III-8 Minneapolis, MN 55427 Appendices Appendices Part No. Page Part No. Page Part No. Page Part No. Page Alpha Numeric Index 1461-0070...............................A-32 1462-0040...............................A-32 1462-0100...............................A-32 14-6B ......................................A-10 14C .........................................A-10 14F..........................................A-10 15............................................A-10 15C .........................................A-10 15F..........................................A-10 16 ..................................A-10, A-13 16-5B.............................A-10, A-13 16-5BP ..........................A-10, A-13 16-6B.............................A-10, A-13 16-6BP ..........................A-10, A-13 16-7B.............................A-10, A-13 16E................................A-10, A-13 16G ...............................A-10, A-13 17 ..................................A-10, A-13 17E................................A-10, A-13 17G ...............................A-10, A-13 1C ...........................................A-11 1E ...........................................A-11 1F............................................A-11 2047-0010...............................A-32 2123-0030...............................A-32 24............................................A-13 24-5B ......................................A-13 24-5BP....................................A-13 24-6B ......................................A-13 24C .........................................A-13 24F..........................................A-13 25............................................A-13 25C .........................................A-13 25F..........................................A-13 2600........................................E-14 2625........................................E-14 2650........................................E-14 2676........................................E-14 2C ...........................................A-11 2C-E........................................A-11 2E ...........................................A-11 2F............................................A-11 3005-2.....................................B-60 3005-3.....................................B-60 3009-2.....................................B-60 3009-3.....................................B-60 3010-2.....................................B-43 3010-3.....................................B-43 3010-3-230 .............................B-43 3050-2.....................................B-43 3050-3.....................................B-43 3050-3-231 .............................B-43 3060-0109...............................A-32 3061-0109...............................A-32 3080-0020...............................A-32 3081-0020...............................A-32 3613001..................................B-48 3C ...........................................A-11 3C-E........................................A-11 3E ...........................................A-11 3F............................................A-11 4010-2P ..................................B-17 4010-3P.........................B-17, B-19 4010-6P ..................................B-17 4010-T6 ..................................B-17 4050-15...................................B-17 4050-15P ................................B-17 4050-16...................................B-17 4050-16P ................................B-17 4050-29BSPP.........................B-17 4050-2P ..................................B-17 4050-2P-T8M..........................B-17 4050-3P ..................................B-17 4050-4.....................................B-17 4050-4P ..................................B-17 4050-5.....................................B-17 4050-5P ..................................B-17 4050-6P ..................................B-17 4050P-T6 ................................B-17 4050-T6 ..................................B-17 410..........................................A-39 410-N ......................................A-39 410-S ......................................A-39 410-SV....................................A-39 4110-5.....................................B-17 4118005..................................B-11 4118006..................................B-11 4118007....................................B-8 4128002....................................B-8 4138001..................................B-11 4148001....................................B-8 4148002..................................B-11 4150-5.....................................B-17 4158001....................................B-8 415-N ......................................A-39 415-S ......................................A-39 4250-15...................................B-19 4250-15P ................................B-19 4250-3P ..................................B-19 4250-4.....................................B-19 4250-4P ..................................B-19 50001-010-0010.......................B-53 50001-013-0010........................B-8 50001-015-0010........................B-8 50001-110-0010......................B-53 50001-112-0010 ............B-11, B-53 50001-113-0260......................B-17 50001-115-0010 ......................B-11 50001-116-0260 ............B-17, B-19 50001-116-0010........................B-8 50001-123-0010......................B-11 50001-124-0010........................B-8 50001-126-0010......................B-11 50001-133-0010........................B-8 50001-138-0260........................B-8 50001-211-0260..B-17,B-19,B-39,B-41 50001-211-0010......................B-11 50001-212-0010......................B-53 50001-213-0010........................B-8 50001-214-0010......................B-53 50001-217-0010......................B-53 50001-218-0260......................B-17 50001-218-0010........................B-8 50001-221-0010......................B-53 50001-222-0010........................B-8 50001-224-0010........................B-8 50001-234-0260........................B-8 50001-327-0010......................B-53 50001-333-0010........................B-8 50005-211-0202 .....................B-37 5001-215-0010 .......................B-17 5005-4.....................................B-59 5009-4.....................................B-59 50-140-4 .................................B-11 5050-4.....................................B-41 5205-2M..................................B-59 5205-3.....................................B-59 5205-4M........................B-58, B-59 5205-5.....................................B-59 5205-6.....................................B-59 5209-2M..................................B-59 5209-3.....................................B-59 5209-4M........................B-58, B-59 5209-5.....................................B-59 5209-6.....................................B-59 5E ...........................................A-11 5EP.........................................A-11 5F............................................A-11 6100-08...................................B-34 6100-12...................................B-34 6100-16...................................B-34 6100-20...................................B-34 6100-24...................................B-34 6105-08...................................B-35 6105-12...................................B-35 6105-16...................................B-35 6105-20...................................B-35 6105-24...................................B-35 6107-08...................................B-35 6107-16...................................B-35 6107-20...................................B-35 6107-24...................................B-35 6108-08...................................B-59 6108-16...................................B-59 6108-20...................................B-59 6108-24...................................B-59 6109-08...................................B-59 6109-16...................................B-59 6109-20...................................B-59 6109-24...................................B-59 6110-08...................................B-34 6110-12...................................B-34 6110-16...................................B-34 6110-20...................................B-34 6110-24...................................B-34 6115-08...................................B-35 6115-12...................................B-35 6115-16...................................B-35 6115-20...................................B-35 6115-24...................................B-35 6120-08...................................B-34 6120-12...................................B-34 6120-16...................................B-34 6120-20...................................B-34 6120-24...................................B-34 6125-08...................................B-35 6125-12...................................B-35 6125-16...................................B-35 6125-20...................................B-35 6125-24...................................B-35 6130-08...................................B-34 6130-12...................................B-34 6130-16...................................B-34 6130-20...................................B-34 6130-24...................................B-34 6135-08...................................B-35 6135-12...................................B-35 6135-16...................................B-35 6135-20...................................B-35 6135-24...................................B-35 6601-12-10 .............................B-11 6601-12-12 .............................B-11 6601-16-16 .............................B-11 6601-2-4 .................................B-11 6601-4-4 .................................B-11 6601-6-6 .................................B-11 6601-8-10 ...............................B-11 6602-12-10 .............................B-11 6602-12-12 .............................B-11 6602-16-16 .............................B-11 6602-2-4 .................................B-11 6602-4-4 .................................B-11 6602-6-6 .................................B-11 6602-8-10 ...............................B-11 6608-10-10 .............................B-11 6608-12-10 .............................B-11 6608-12-12 .............................B-11 6608-16-16 .............................B-11 6608-6-6 .................................B-11 6608-8-10 ...............................B-11 6610-10-10 .............................B-11 6610-12-10 .............................B-11 6610-12-12 .............................B-11 6610-16-16 .............................B-11 6610-6-6 .................................B-11 6610-8-10 ...............................B-11 6657-12M................................B-58 6657-16M................................B-58 6659-12M................................B-58 6659-16M................................B-58 7820123..................................B-48 8010-15........B-17, B-19, B-37, B-39, B-41 8010-15P........B-17, B-19, B-37, B-39 8010-15P-DC ..................B-17, B-19 8010-16 ..........B-17, B-37, B-39, B-41 8010-16P ..............B-17, B-37, B-39 8010-29BSPP.........................B-17 8010-4....B-17, B-19, B-37, B-39, B-41 8010-4P ......B-17, B-19, B-37, B-39 8010-4P-DC ..................B-17, B-19 8010-5.....................................B-17 8010-5P ..................................B-17 8050-0110...............................A-32 8052-0319...............................A-32 8250-15...................................B-37 8250-16...................................B-37 8250-4.....................................B-37 8278-0050...............................A-32 8624-0070...............................A-32 8787-0040...............................A-32 8788-0030...............................A-32 8C ...........................................A-11 8CP.........................................A-11 9250-15-320 ...........................B-39 9250-16-320 ...........................B-39 9250-334.................................B-39 9250-4-320 .............................B-39 9250-6-320 .............................B-39 9507-4-1 .................................B-60 9C ...........................................A-11 9CP.........................................A-11 Appendices Air Inclusion: The ambient atmosphere forced into the system during the connection of the quick disconnect halves. Break-Away: Automatic disconnection of a coupling when an axial separation force is applied. Brinelling: Dimples or grooves worn into the shoulder of a male half by the locking balls in the female half. Burst Pressure: The pressure at which a device loses the capability to retain pressure. Case Hardening: Hardening the surface of low carbon steel.. Cold Flow: Continued deformation under load. Connect Under Pressure: Ability to connect coupling halves with internal line pressure applied to either both sides or one side. Coupling, Female Half: Other nomenclature “coupler”, “socket”, “body”. Coupling, Male Half: Other nomenclature “nipple”, “plug”, “adapter”. Coupling, Quick Disconnect: A component which can quickly join or separate a fluid line without the use of tools or special devices. Differential Pressure (ΔP): The difference in pressure between any two points of a system or a component. Double-Acting Sleeve: Permits push-to-connect and pull-todisconnect convenience on implement line when female half is clamp mounted and connected with a hose. Dust Cap: Dust or dirt repelling enclosure for both halves. Dust Plug: Dust or dirt repelling enclosure both halves. Flow Checking: Occurs when a nipple valve closes during flow conditions, such as when quickly lowering a heavy implement. (Also called Check Off, Back Checking or Lock-up.) Flush Position (Valve): When the coupler valve is fully open, allowing maximum oil flow. Force to Connect: Axial and/or rotational force required to make a complete connection. Force to Disconnect: The reverse of the above. Induction Hardening: Localized hardening of medium carbon steel. Peak Pressure: Maximum momentary pressure encountered in the operation of a component. Pressure Cap: Cap which incorporates a seal capable of withstanding the rated pressures on the male half. Pressure Impulse Test: Subjecting a component to a specified pressure at a specified rate of increase or decrease for a specified time limit. Pressure Operating: The pressure at which a system is operated. Pressure Plug: Plug which incorporates a seal capable of withstanding the rated pressures on the female half. Proof Pressure: The non-destructive test pressure in excess of the maximum rated operating pressure. Push To Connect (Auto Lock): Locking arrangement which permits one handed connection by pushing the nipple into the coupler. Rated Pressure: The maximum pressure at which a product is designed to operate. Single-Acting Sleeve: Permits pull-to-disconnect convenience on implement line when female body is clamp mounted. Making connection requires manually pulling female body forward, inserting male tip, then allowing body and tip to return to original position in the clamp. Sleeve Lock: Arrangement which provides an additional lock which must be actuated before the locking sleeve can be retracted. Spillage: The fluid removed from the system due to disconnection of a coupling assembly. This is the fluid trapped between the mating seal and the valve seal of the coupling halves. Surge Pressure: The pressure existing from surge conditions. Surge Flows: A rapid increase in fluid flow. Thermal Build-Up: Hydraulic pressure caused by expansion of the fluid due to heat from an external source such as sunlight. Trapped Pressure: Pressurized hydraulic fluid trapped behind closed coupling valve Twist Lock: A locking arrangement which requires a rotational actuation to unlock the mating halves. Types of Quick Disconnect Coupling Valves Straight-Thru (ST): This provides straight through flow. Double Shut-off Valve (DSO): A valve in the female half and a valve in the male half. Single Shut-off Valve (SSO): Generally, a valve in the female half with no valve in the male half. NOTE: Refer to Parker’s Publication No. 3800-B1.0: Safety Guide for Selecting and Using Quick Action Couplings and Related Accessories. Glossary of Terms Parker Hannifin Corporation Quick Coupling Division IV-1 Minneapolis, MN 55427 Appendices V-1 Parker Hannifin Corporation Quick Coupling Division Minneapolis, MN 55427 Appendices Appendices The items described in this document and other documents and descriptions provided by Parker Hannifin Corporation, its subsidiaries and its authorized distributors (“Seller”) are hereby offered for sale at prices to be established by Seller. This offer and its acceptance by any customer (“Buyer”) shall be governed by all of the following Terms and Conditions. Buyer’s order for any item described in its document, when communicated to Seller verbally, or in writing, shall constitute acceptance of this offer. All goods or work described will be referred to as “Products”. 1. Terms and Conditions. Seller’s willingness to offer Products, or accept an order for Products, to or from Buyer is expressly conditioned on Buyer’s assent to these Terms and Conditions and to the terms and conditions found on-line at www.parker.com/saleterms/. Seller objects to any contrary or additional term or condition of Buyer’s order or any other document issued by Buyer. 2. Price Adjustments; Payments. Prices stated on the reverse side or preceding pages of this document are valid for 30 days. After 30 days, Seller may change prices to reflect any increase in its costs resulting from state, federal or local legislation, price increases from its suppliers, or any change in the rate, charge, or classification of any carrier. The prices stated on the reverse or preceding pages of this document do not include any sales, use, or other taxes unless so stated specifically. Unless otherwise specified by Seller, all prices are F.O.B. Seller’s facility, and payment is due 30 days from the date of invoice.After 30 days, Buyer shall pay interest on any unpaid invoices at the rate of 1.5% per month or the maximum allowable rate under applicable law. 3. Delivery Dates; Title and Risk; Shipment. All delivery dates are approximate and Seller shall not be responsible for any damages resulting from any delay. Regardless of the manner of shipment, title to any products and risk of loss or damage shall pass to Buyer upon tender to the carrier at Seller’s facility (i.e., when it’s on the truck, it’s yours). Unless otherwise stated, Seller may exercise its judgment in choosing the carrier and means of delivery. No deferment of shipment at Buyers’ request beyond the respective dates indicated will be made except on terms that will indemnify, defend and hold Seller harmless against all loss and additional expense. Buyer shall be responsible for any additional shipping charges incurred by Seller due to Buyer’s changes in shipping, product specifications or in accordance with Section 13, herein. 4. Warranty. Seller warrants that the Products sold hereunder shall be free from defects in material or workmanship for a period of twelve months from the date of delivery to Buyer or 2,000 hours of normal use, whichever occurs first. This warranty is made only to Buyer and does not extend to anyone to whom Products are sold after purchased from Seller. The prices charged for Seller’s products are based upon the exclusive limited warranty stated above, and upon the following disclaimer: DISCLAIMER OF WARRANTY: THIS WARRANTY COMPRISES THE SOLE AND ENTIRE WARRANTY PERTAINING TO PRODUCTS PROVIDED HEREUNDER. SELLER DISCLAIMS ALL OTHER WARRANTIES, EXPRESS AND IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 5. Claims; Commencement of Actions. Buyer shall promptly inspect all Products upon delivery. No claims for shortages will be allowed unless reported to the Seller within 10 days of delivery. No other claims against Seller will be allowed unless asserted in writing within 60 days after delivery or, in the case of an alleged breach of warranty, within 30 days after the date within the warranty period on which the defect is or should have been discovered by Buyer. Any action based upon breach of this agreement or upon any other claim arising out of this sale (other than an action by Seller for any amount due to Seller from Buyer) must be commenced within thirteen months from the date of tender of delivery by Seller or, for a cause of action based upon an alleged breach of warranty, within thirteen months from the date within the warranty period on which the defect is or should have been discovered by Buyer. 6. LIMITATION OF LIABILITY. UPON NOTIFICATION, SELLER WILL,AT ITS OPTION,REPAIR OR REPLACE A DEFECTIVE PRODUCT, OR REFUND THE PURCHASE PRICE. IN NO EVENT SHALL SELLER BE LIABLE TO BUYER FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF, OR AS THE RESULT OF, THE SALE, DELIVERY, NON-DELIVERY, SERVICING, USE OR LOSS OF USE OF THE PRODUCTS OR ANY PART THEREOF, OR FOR ANY CHARGES OR EXPENSES OF ANY NATURE INCURRED WITHOUT SELLER’S WRITTEN CONSENT, EVEN IF SELLER HAS BEEN NEGLIGENT, WHETHER IN CONTRACT, TORT OR OTHER LEGAL THEORY. IN NO EVENT SHALL SELLER’S LIABILITY UNDER ANY CLAIM MADE BY BUYER EXCEED THE PURCHASE PRICE OF THE PRODUCTS. 7. Contingencies. Seller shall not be liable for any default or delay in performance if caused by circumstances beyond the reasonable control of Seller. 8. User Responsibility. The user, through its own analysis and testing, is solely responsible for making the final selection of the system and Product and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application and follow applicable industry standards and Product information. If Seller provides Product or system options, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the Products or systems. 9. Loss to Buyer’s Property. Any designs, tools, patterns, materials, drawings, confidential information or equipment furnished by Buyer or any other items which become Buyer’s property, may be considered obsolete and may be destroyed by Seller after two consecutive years have elapsed without Buyer placing an order for the items which are manufactured using such property. Seller shall not be responsible for any loss or damage to such property while it is in Seller’s possession or control. 10. Special Tooling. A tooling charge may be imposed for any special tooling, including without limitation, dies, fixtures, molds and patterns, acquired to manufacture Products. Such special tooling shall be and remain Seller’s property notwithstanding payment of any charges by Buyer. In no event will Buyer acquire any interest in apparatus belonging to Seller which is utilized in the manufacture of the Products, even if such apparatus has been specially converted or adapted for such manufacture and notwithstanding any charges paid by Buyer. Unless otherwise agreed, Seller shall have the right to alter, discard or otherwise dispose of any special tooling or other property in its sole discretion at any time. 11. Buyer’s Obligation; Rights of Seller. To secure payment of all sums due or otherwise, Seller shall retain a security interest in the goods delivered and this agreement shall be deemed a Security Agreement under the Uniform Commercial Code. Buyer authorizes Seller as its attorney to execute and file on Buyer’s behalf all documents Seller deems necessary to perfect its security interest. Seller shall have a security interest in, and lien upon, any property of Buyer in Seller’s possession as security for the payment of any amounts owed to Seller by Buyer. 12. Improper use and Indemnity. Buyer shall indemnify, defend, and hold Seller harmless from any claim, liability, damages, lawsuits, and costs (including attorney fees), whether for personal injury, property damage, patent, trademark or copyright infringement or any other claim, brought by or incurred by Buyer, Buyer’s employees, or any other person, arising out of: (a) improper selection, improper application or other misuse of Products purchased by Buyer from Seller; (b) any act or omission, negligent or otherwise, of Buyer; (c) Seller’s use of patterns, plans, drawings, or specifications furnished by Buyer to manufacture Product; or (d) Buyer’s failure to comply with these terms and conditions. Seller shall not indemnify Buyer under any circumstance except as otherwise provided. 13. Cancellations and Changes. Orders shall not be subject to cancellation or change by Buyer for any reason, except with Seller’s written consent and upon terms that will indemnify, defend and hold Seller harmless against all direct, incidental and consequential loss or damage. Seller may change product features, specifications, designs and availability with notice to Buyer. 14. Limitation on Assignment. Buyer may not assign its rights or obligations under this agreement without the prior written consent of Seller. 15. Entire Agreement. This agreement contains the entire agreement between the Buyer and Seller and constitutes the final, complete and exclusive expression of the terms of the agreement. All prior or contemporaneous written or oral agreements or negotiations with respect to the subject matter are herein merged. 16. Waiver and Severability. Failure to enforce any provision of this agreement will not waive that provision nor will any such failure prejudice Seller’s right to enforce that provision in the future. Invalidation of any provision of this agreement by legislation or other rule of law shall not invalidate any other provision herein. The remaining provisions of this agreement will remain in full force and effect. 17. Termination. This agreement may be terminated by Seller for any reason and at any time by giving Buyer thirty (30) days written notice of termination. In addition, Seller may by written notice immediately terminate this agreement for the following: (a) Buyer commits a breach of any provision of this agreement (b) the appointment of a trustee, receiver or custodian for all or any part of Buyer’s property (c) the filing of a petition for relief in bankruptcy of the other Party on its own behalf, or by a third party (d) an assignment for the benefit of creditors, or (e) the dissolution or liquidation of the Buyer. 18. Governing Law. This agreement and the sale and delivery of all Products hereunder shall be deemed to have taken place in and shall be governed and construed in accordance with the laws of the State of Ohio, as applicable to contracts executed and wholly performed therein and without regard to conflicts of laws principles. Buyer irrevocably agrees and consents to the exclusive jurisdiction and venue of the courts of Cuyahoga County, Ohio with respect to any dispute, controversy or claim arising out of or relating to this agreement. Disputes between the parties shall not be settled by arbitration unless, after a dispute has arisen, both parties expressly agree in writing to arbitrate the dispute. 19. Indemnity for Infringement of IntellectualProperty Rights. Seller shall have no liability for infringement of any patents, trademarks, copyrights, trade dress, trade secrets or similar rights except as provided in this Section. Seller will defend and indemnify Buyer against allegations of infringement of U.S. patents, U.S. trademarks, copyrights, trade dress and trade secrets (“Intellectual Property Rights”). Seller will defend at its expense and will pay the cost of any settlement or damages awarded in an action brought against Buyer based on an allegation that a Product sold pursuant to this Agreement infringes the Intellectual Property Rights of a third party. Seller’s obligation to defend and indemnify Buyer is contingent on Buyer notifying Seller within ten (10) days after Buyer becomes aware of such allegations of infringement, and Seller having sole control over the defense of any allegations or actions including all negotiations for settlement or compromise. If a Product is subject to a claim that it infringes the Intellectual Property Rights of a third party, Seller may, at its sole expense and option, procure for Buyer the right to continue using the Product, replace or modify the Product so as to make it noninfringing, or offer to accept return of the Product and return the purchase price less a reasonable allowance for depreciation. Notwithstanding the foregoing, Seller shall have no liability for claims of infringement based on information provided by Buyer, or directed to Products delivered hereunder for which the designs are specified in whole or part by Buyer, or infringements resulting from the modification, combination or use in a system of any Product sold hereunder. The foregoing provisions of this Section shall constitute Seller’s sole and exclusive liability and Buyer’s sole and exclusive remedy for infringement of Intellectual Property Rights. 20. Taxes. Unless otherwise indicated, all prices and charges are exclusive of excise, sales, use, property, occupational or like taxes which may be imposed by any taxing authority upon the manufacture, sale or delivery of Products. 21. Equal Opportunity Clause. For the performance of government contracts and where dollar value of the Products exceed $10,000, the equal employment opportunity clauses in Executive Order 11246, VEVRAA, and 41 C.F.R. §§ 60-1.4(a), 60-741.5(a), and 60-250.4, are hereby incorporated. Offer of Sale Parker Quick Coupling Division Locations FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. • This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise. • The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors. • To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems. Offer of Sale The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated in the “Offer of Sale.” Minneapolis, Minnesota Grantsburg, Wisconsin Lincoln, Nebraska Chetek, Wisconsin Quick Coupling Division 8145 Lewis Road Minneapolis, MN 55427 © 2009, Revised October 2009 , Parker Hannifin Corporation, All Rights Reserved. Parker’s Charter To be a leading worldwide manufacturer of components and systems for the builders and users of durable goods. More specifically, we will design, market and manufacture products controlling motion, flow and pressure.We will achieve profitable growth through premier customer service. Product Information North American customers seeking product information, the location of a nearby distributor, or repair services will receive prompt attention by calling the Parker Product Information Center at our toll-free number: 1-800-C-PARKER (1-800-272-7537). In Europe, call: 00800-C-PARKER-H (00800-2727-5374). The Fluid Connectors Group designs, manufactures and markets rigid and flexible connectors, and associated products used in pneumatic and fluid systems. The Hydraulics Group designs, produces and markets a full spectrum of hydraulic components and systems to builders and users of industrial and mobile machinery and equipment. The Automation Group is a leading supplier of pneumatic and electromechanical components and systems to automation customers worldwide. The Seal Group designs, manufactures and distributes industrial and commercial sealing devices and related products by providing superior quality and total customer satisfaction. The Filtration Group designs, manufactures and markets quality filtration and clarification products, providing customers with the best value, quality, technical support, and global availability. The Instrumentation Group is a global leader in the design, manufacture and distribution of high-quality critical flow components for worldwide process instrumentation, ultra-high-purity, medical and analytical applications. About Parker Hannifin Corporation Parker Hannifin is a leading global motion-control company dedicated to delivering premier customer service. A Fortune 500 corporation listed on the New York Stock Exchange (PH), our components and systems comprise over 1,400 product lines that control motion in some 1,000 industrial and aerospace markets. Parker is the only manufacturer to offer its customers a choice of hydraulic, pneumatic, and electromechanical motion-control solutions. Our Company has the largest distribution network in its field, with over 7,500 distributors serving nearly 400,000 customers worldwide. Parker Hannifin Corporation 6035 Parkland Blvd. Cleveland, Ohio 44124-4141 Telephone: (216) 896-3000 Fax: (216) 896-4000 www.parker.com Parker Hannifin Corporation The Aerospace Group is a leader in the development, design, manufacture and servicing of control systems and components for aerospace and related high-technology markets, while achieving growth through premier customer service. The Climate & Industrial Controls Group designs, manufactures and markets system-control and fluid-handling components and systems to refrigeration, air-conditioning and industrial customers worldwide.