Rectus Mould Couplings Quick connect couplings for tempering and cooling.  The enTire world of mould cooling. Dear Customers and Business Friends, Today, for the first time, we are able to offer you a complete range of quick connect coupling systems for the field of tempering and cooling, under the Parker umbrella. With this extensive range, we are able to offer you the broadest range on the market and we are the only supplier of all three princi- pal European profiles – International, European and French. Our systems are available both as individual products and as complete, ready-made units with any desired hose lengths and qualities. Naturally, our specialist advisers are also available at any time to provide personal advice and assistance if ever you cannot immediately find what you are looking for or if you have a particularly special problem to solve. Important Notes: l Please note that the technical data, specifications and drawings in the catalogue are not binding. This information is subject to change without notice in the interest of improvement. l We reserve the right to make technical modifications for the purposes of improvement. l March 2011: With the actual catalogue the older versions are no longer valid. l The interchangeability is guaranteed under the assump- tion that the manufacturer of the relevant product has not changed any functional part in the meantime. l You will find important safety instructions on pages 6 and 7. 2 General Information index of conTenTs INTERNATIONAL International Program: Series 86/87/88 EUROPEAN European Program: Series 10/11/12 FRENCH French Program: Series 608/612 FRENCHMATIC I Frenchmatic Program: Series 6006/6009/6012/6016 FRENCHMATIC II Frenchmatic Program: Series 006KL MULTI-MATIC Accessories Hoses from page 8 from page 12 from page 18 from page 22 from page 25 from page 27 from page 29 from page 33 3 General Information  safe-lockTM – safeTy wiTh no compromises. SAFE-LOCKTM The products marked with this system are fitted with the SaFE-LOCKTM technology developed by our designers. Using a special mechanism, the SaFE- LOCKTM technology reliably prevents accidental uncoupling of the systems under pressure. as the normally con- tiguous temperatures of the media used are between 90°C and 170°C, accidents of this nature can result in serious burns. The only alternatives to the SaFE-LOCKTM systems are double shut-off couplings, with which, however, the complex valve technology has a strong negative impact on the flow values. SaFE-LOCKTM Coupling Systems • Reliably eliminate the risk of serious burns • Cannot be disconnected under pressure • Are available both for our European and International ranges • Are 100% compatible with our standard systems and are therefore also easy to retrofit at a later date • Are compliant with EU safety directive 97/23/EF unlocked locked 4 General Information always precisely The righT profile. INTERNATIONAL Profile proven for decades in the field of plastic injection technology for two-handed coupling systems with great market penetration. EUROPEAN Development of the International profile. The coupling systems with the European profile stand out for their comfortable single-handed operation and a reliable O-ring seal. FRENCH available only as a straight-through coupling without valve. O-rings are very easy to replace. Moreover, simple colour coding is possible here, by means of Colour Clip. FRENCHMATIC I This range of couplings was constructed with valves as an alternative to the French profiles. all four nominal diameters in our Frenchmatic I range are available with single and double shut-off. FRENCHMATIC II We supply our Frenchmatic II coupling system as a leak-free version. The range stands out for its single- handed operation and minimum leakage when disconnecting. 5 General Information  safeTy guide for selecTing and using Quick connecT couplings and relaTed accessories DANGER: failure or improper selection or improper use of quick connect couplings or related accessories can cause death, personal injury and property damage. Possible consequences of failure or • Couplings or parts thrown off at high speed • High velocity fluid discharge • Contact with suddenly moving or falling objects that are to be held in position or moved by the conveyed fluid • Dangerously whipping hose improper selection or improper use of quick connect couplings or related accessories include but are not limited to: • Explosion or burning of the conveyed fluid • Contact with conveyed fluids that may be hot, cold, toxic, or otherwise injurious • Sparking or explosion while paint or flammable liquid spraying Before selecting or using any Parker RectusTema quick connect couplings or related accessories, it is important that you read and follow the following instructions. 1.0 GENERAL INSTRUCTIONS 1.1 Scope: this catalogue provides instructions for selecting and using (including installing connecting, disconnecting, and maintaining) quick connect couplings and related accessories (including caps, plugs, hoses, blow guns). This safety instruction is a supplement to and is to be used with the specific Parker publications for the specific quick connect couplings and related accessories that are being considered for use. 1.2 Fail-Safe: quick connect couplings or the hose they are attached to can fail without warning for many reasons. Design all systems and equipment in a fail-safe mode, so that failure of the quick connect coupling or hose will not endanger persons or property. 1.3 Distribution: provide a copy of this safety guide to each person who is responsible for selecting or using quick connect coupling products. Do not select or use quick connect couplings without thoroughly reading and understanding this safety guide as well as the specific Parker publications for the products considered or selected. 1.4 User responsibility: due to the wide variety of operating conditions and uses for quick connect couplings, Parker RectusTema and its distribu- tors do not represent or warrant that any particular coupling system is suitable for any specific end use system. This safety instructions do not analyse all technical parameters that must be considered in selecting a product. The user, through its own analysis and testing, is solely responsible for: • Making the final selection of the quick connect couplings. • Assuring that the user’s requirements are met and that the use presents no health or safety hazards. • Providing all appropriate health and safety warnings on the equipment on which the quick connect couplings are used. 1.5 Additional questions: call the appropriate Parker customer service department if you have any questions or require any additional information. For the telephone numbers of the appropriate customer service department, see the Parker publication for the product being considered or used. 2.0 SELECTION INSTRUCTIONS 2.1 Pressure: quick connect couplings selection must be made so that the published rated pressure of the coupling is equal to or greater than the maximum system pressure. Pressure surges in the system higher than the rated pressure of the coupling will shorten the quick connect coupling’s life. Do not confuse burst pressure or other pressure values with rated pressure and do not use burst pressure or other pressure values for this purpose. 2.2 Fluid compatibility: quick connect couplings selection must assure compatibility of the body and seal materials with the fluid media used. See the fluid compatibility chart. 2.3 Temperature: be certain that fluid and ambient temperatures, both steady and transient, do not exceed the limitations of the quick connect couplings. Use caution and hand protection when connecting or disconnecting quick connect couplings that are heated or cooled by the media they are conducting or by their environment. 2.4 Size: transmission or power by means of pressurised liquid varies with pressure and rate of flow. The size of the quick connect couplings and other components of the system must be adequate to keep pressure losses to a minimum and avoid damage due to heat generation or excessive fluid velocity. 2.5 Pressurised connection or disconnection: if connecting or disconnecting under pressure is a requirement, use only quick connect couplings designed for that purpose. The rated operating pressure of a quick connect coupling may not be the pressure at which it may be safely connected or disconnected. 2.6 Environment: care must be taken to ensure that quick connect couplings are either compatible with or protected from the environment (that is, surrounding conditions) to which they are exposed. Environmental conditions including but not limited to ultraviolet radiation, ozone, moisture, water, salt water, chemicals, and air pollutants can cause degradation and premature failure. 6 General Information 2.7 Locking means: ball locking quick connect couplings can unintentionally disconnect if they are dragged over obstructions on the end of a hose or if the sleeve is bumped or moved enough to cause disconnection. Sleeves designed with flanges to provide better gripping for oily or gloved hands are especially susceptible to accidental disconnection and should not be used where these conditions exist. Sleeve lock or union (threaded) sleeve designs should be considered where there is a potential for accidental uncoupling. 2.8 Mechanical loads: external forces can significantly reduce quick connect couplings’ life or cause failure. Mechanical loads which must be con- sidered include excessive tensile or side loads and vibration. Unusual applications may require special testing prior to quick connect couplings selection. 2.9 Specifications and standards: when selecting quick connect couplings, government, industry and Parker specifications must be reviewed and followed as applicable. 2.10 Vacuum: not all quick connect couplings are suitable or recommended for vacuum service. Quick connect couplings used for vacuum applica- tions must be selected to ensure that the quick connect couplings will withstand the vacuum and pressure of the system. 2.11 Fire resistant fluids: some fire resistant fluids require seals other than the standard NBR (nitrile) used in many coupling systems. 2.12 Radiant heat: quick connect couplings can be heated to destruction or loss of sealing without contact by such nearby items as hot manifolds or molten metal. The same heat source may then initiate a fire. This can occur despite the presence of cool air around the quick connect couplings. 2.13 Welding and brazing: heating of plated parts, including quick connect couplings and port adapters, above 450 °F (232 °C) such as during welding, brazing, or soldering may emit deadly gases and may cause coupling seal damage. 3.0 INSTALLATION INSTRUCTIONS 3.1 Pre-installation inspection: before installing a quick connect coupling, visually inspect it and check for correct style, body material, seal material, and catalogue number. Before final installation, coupling halves should be connected and disconnected with a sample of the mating half with which they will be used. 3.2 Quick connect coupling halves from other manufacturers: if a quick connect coupling assembly is made up of one Parker RectusTema half and one half from another manufacturer, the lowest pressure rating of the two halves should not be exceeded. 3.3 Fitting installation: use a thread sealant, when assembling taper pipe thread joints in quick connect couplings. Be sure the sealant is compatible with the system fluid or gas. To avoid system contamination, use a liquid or paste type sealant rather than a tape style. Use the flats provided to hold the quick connect coupling when installing fittings. Do not use pipe wrenches or a vice on other parts of the coupling to hold it when installing or a removing fittings as damage or loosening of threaded joints in the coupling assembly could result. Do not apply excessive torque to taper pipe threads because cracking or splitting of the female component can result. 3.4 Caps and plugs: use dust caps and plugs when quick connect couplings are not coupled to exclude dirt and contamination and to protect critical surfaces from damage. 3.5 Coupling location: locate quick connect couplings where they can be reached for connection or disconnection without exposing the operator to slipping, falling, getting sprayed or coming in contact with hot or moving parts. 3.6 Hose whips: use a hose whip (a short length of hose between the tool and the coupling half) instead of rigidly mounting a coupling half on hand tools or other devices. This reduces the potential for coupling damage if the tool is dropped and provides some isolation from mechanical vibration which could cause uncoupling. 4.0 MAINTENANCE INSTRUCTIONS 4.1 Even with proper selection and installation, quick connect coupling life may be significantly reduced without a continuing maintenance program. Frequency should be determined by the severity of the application and risk potential. A maintenance program must be established and followed by the user and must include the following as a minimum: 4.2 Visual inspection of quick connect couplings: any of the following conditions require immediate shut down and replacement of the quick connect coupling: • Cracked, damaged, or corroded quick connect couplings parts. • Leaks at the fitting, valve or mating seal. • Broken coupling mounting hardware, especially breakaway clamps. 4.3 Visual inspection all other: • Leaking seals or port connections. • Excess dirt build-up on the coupling locking means or on the interface area of either coupling half. • Defective clamps, guards, and shields. • System fluid level, fluid type and any entrapment. 4.4 Functional test: operate the system at maximum operating pressure and check for possible malfunctions and freedom from leaks. Personnel must avoid potential hazardous areas while testing and using the system. 4.5 Replacement intervals: specific replacement intervals must be considered based on previous service life, government or industry recommendations, or when failures could result in unacceptable downtime, damage or injury risk. See instruction 1.2 above. 7 General Information  INTERNATIONAL Nominal Diameter RECTUS Series 6/9/13 86/87/88 Technical Description The 86, 87 and 88 Rectus Moldtite coupling series were especially developed for connecting coolant lines and injection moulds. Countersunk plugs can easily be connected and disconnected because of the extended sleeve. The angular connections prevent kinks from forming in the hose. Material Coupling Back Body Valve Body Sleeve Sleeve Valve Locking Balls Spring Seal Plug Plug Profile Back Body Valve Spring Seal Advantages Available in single shut-off, double shut-off, straight-through and SAFE-LOCKTM versions. The shut-off couplings (with valve) are equipped with nickel plated sleeves for quick and accurate visual differentiation. Available Valves Brass Brass Brass (without Valve) Brass, Nickel Plated (with Valve) Brass AISI 420 AISI 301 FKM Working Pressure: PB = 15 bar, maximum static working pressure with safety factor of 4 to 1. Working Temperature* -15°C up to +200°C (FKM) depending on the medium. *At a temperature below -15°C and above +200°C special seals are available on request. Chart Flow Rate l/min Flow Rate l/min Flow Rate l/min Couplings Brass Brass Brass AISI 301 FKM 6 RECTUS Series 86 / 87/ 88 DN D L1 L2 Series Connec- tiona L D1 D2 Valve Part Number PU DS Hex SW mm mm mm mm mm mm 9 86 87 G 1/4 G 3/8 G 1/4 Male Thread DS = Delivery Status: in stock on short call medium term delivery G 3/8 17 19 22 22 47 47 56,5 56,5 18 18 24 24 9 9 9 9 with without with without with without with without 86KB aW13 MVX 86KF aW13 MVX 86KB aW17 MVX 86KF aW17 MVX 87KB aW13 MVX 87KF aW13 MVX 87KB aW17 MVX 87KF aW17 MVX 10 10 10 10 10 10 10 10 8 Pressure Drop (bar) Pressure Drop (bar) Pressure Drop (bar) 80% of actual size Low Pressure Mould Connections Couplings RECTUS Series 86 / 87/ 88 DN Series Connec- tiona Hex L D L1 L2 D1 D2 Valve SW mm mm mm mm mm mm Part Number PU DS 9 6 9 6 9 6 9 13 6 9 87 86 87 86 87 86 87 88 86 87 G 1/2 G 1/4 G 3/8 G 1/4 G 3/8 G 1/2 G 1/8 G 1/4 G 1/4 G 3/8 6 mm 9 mm 9 mm 13 mm 19 mm 6 mm 9 mm 9 mm 13 mm 22 17 19 22 22 22 17 17 21 21 59,5 51,5 51,5 67 67 70 40 40 51,5 51,5 46 51 64 66,5 89 54 59 73 76 24 18 18 24 24 24 18 18 24 24 18 18 24 24 32 18 18 24 24 12 9 9 9 9 12 9 9 9 9 17 22 22 25 32 17 22 22 25 with without with without with without with without with without with without with without with without with without with without with without with without with without with without with without with without with without with without with without 87KB aW21 MVX 87KF aW21 MVX 86KB aW13 MVXSL 86KF aW13 MVXSL 86KB aW17 MVXSL 86KF aW17 MVXSL 87KB aW13 MVXSL 87KF aW13 MVXSL 87KB aW17 MVXSL 87KF aW17 MVXSL 87KB aW21 MVXSL 87KF aW21 MVXSL 86KB IW10 MVX 86KF IW10 MVX 86KB IW13 MVX 86KF IW13 MVX 87KB IW13 MVX 87KF IW13 MVX 87KB IW17 MVX 87KF IW17 MVX 86KB TF06 MVX 86KF TF06 MVX 86KB TF09 MVX 86KF TF09 MVX 87KB TF09 MVX 87KF TF09 MVX 87KB TF13 MVX 87KF TF13 MVX 88Ka TF19 MVX 88KF TF19 MVX 86KB TF06 MVXSL 86KF TF06 MVXSL 86KB TF09 MVXSL 86KF TF09 MVXSL 87KB TF09 MVXSL 87KF TF09 MVXSL 87KB TF13 MVXSL 87KF TF13 MVXSL 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Male Thread Male Thread Female Thread Hose Barb Hose Barb System with SaFE-LOCKTM Technology Please consider our security advices on the pages 6/7 9 Low Pressure Mould Connections Couplings RECTUS Series 86 / 87/ 88 DN Series Connec- tiona Hex L D L1 L2 D1 D2 Valve SW mm mm mm mm mm mm Part Number PU DS 6 9 Hose Barb 90° Hose Barb 90° Hose Barb 45° Hose Barb 45° 13 6 9 6 9 6 9 Plugs RECTUS Series 86 / 87/ 88 DN 6/9 9 D L1 L2 6 13 86 87 88 86 87 86 87 86 87 Series Connec- tiona D1 D2 Valve Part Number PU DS 86 87 88 6 mm 9 mm 9 mm 13 mm 19 mm 9 mm 9 mm 13 mm 6 mm 9 mm 9 mm 13 mm 9 mm 9 mm 13 mm M 10 x 1 R 1/8 R 1/4 R 1/4 R 3/8 R 1/4 R 1/4 R 3/8 R 3/8 R 1/2 R 1/2 R 3/4 Hex L SW mm mm mm mm mm mm 13 13 16 16 19 16 16 19 10 Male Thread 19 24 22 29 40 40 56 56 77 52,5 68,5 68,5 40 40 56 56 51,5 65,5 65,5 23 24 29 29 30 34 34 34 34 39 44 45 18 18 24 24 32 18 24 24 18 18 24 24 18 24 24 9,5 9,5 9,5 9,5 9,5 13,5 13,5 13,5 13,5 13,5 20 20 17 22 22 28,5 32 22 22 28,5 17 22 22 25 22 22 25 8 9 14 12 12 12 12 12 12 17 17 19 with without with without with without with without with without with without with without with without with without with without with without with without with without with without with without without without with without without with without with without without without without 86KB TR06 MVX 86KF TR06 MVX 86KB TR09 MVX 86KF TR09 MVX 87KB TR09 MVX 87KF TR09 MVX 87KB TR13 MVX 87KF TR13 MVX 88KA TR19 MVX 88KF TR19 MVX 86KB TR09 MVXSL 86KF TR09 MVXSL 87KB TR09 MVXSL 87KF TR09 MVXSL 87KB TR13 MVXSL 87KF TR13 MVXSL 86KB TH06 MVX 86KF TH06 MVX 86KB TH09 MVX 86KF TH09 MVX 87KB TH09 MVX 87KF TH09 MVX 87KB TH13 MVX 87KF TH13 MVX 86KB TH09 MVXSL 86KF TH09 MVXSL 87KB TH09 MVXSL 87KF TH09 MVXSL 87KB TH13 MVXSL 87KF TH13 MVXSL 86SF aM10 MXX 86SF aK10 MXX 86SB aK13 MVX 86SF aK13 MXX 86SF aK17 MXX 87SB aK13 MVX 87SF aK13 MXX 87SB aK17 MVX 87SF aK17 MXX 87SF aK21 MXX 88SF aK21 MXX 88SF aK26 MXX 10 10 10 10 10 10 10 10 5 5 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 25 25 25 25 25 25 25 25 25 25 10 10 DS = Delivery Status: in stock on short call medium term delivery Low Pressure Mould Connections Plugs RECTUS Series 86 / 87/ 88 DN Series Connec- tiona Hex L D L1 L2 D1 D2 Valve SW mm mm mm mm mm mm Part Number PU DS 6 Male Thread 90° Female Thread Hose Barb Extension Plugs Male Thread continuous Male Thread without Thread 9 9 6 6 9 13 6 6 6 9 86 87 86 87 86 87 88 86 87 86 87 86 87 M 10 x 1 R 1/8 R 1/4 R 1/4 R 3/8 G 1/8 G 1/4 G 3/8 G 1/4 G 3/8 9 mm 13 mm 19 mm R 1/8 R 1/8 R 1/8 R 1/4 R 1/4 G 1/8 G 1/4 G 1/4 G 3/8 10 mm 10 mm 10 mm 10 mm 14 mm 14 mm 14 mm 14 mm 11 11 14 15 19 13 16 19 16 19 11 11 11 15 15 11 14 14 17 11 11 11 11 15 15 15 15 27 27 27 34 37 28 32 34 37 39 39 41 91 100 150 250 150 250 100 100 100 100 50 100 150 200 100 150 200 250 9,5 9,5 9,5 13,5 13,5 9,5 9,5 9,5 13,5 13,5 9,5 13,5 20 9,5 9,5 9,5 13,5 13,5 9,5 9,5 13,5 13,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9 9 9 9 12 11 13 13 13 13 22 21 46 9 9 9 12 12 60 60 60 60 28,5 28,5 32 32 36 without without without without without without without without without without without without without RECTUS Series 86 / 87/ 88 DN 9 9 Series Connec- tiona Hex L SW mm mm mm mm mm mm Part Number PU DS D L1 L2 D1 D2 Valve without without without without without without without without without without without without without without without without without 86SF AR10 MXX_03 86SF AR10 MXX 86SF AR13 MXX 87SF AR13 MXX 87SF AR17 MXX 86SF IW10 MXX 86SF IW13 MXX 86SF IW17 MXX 87SF IW13 MXX 87SF IW17 MXX 86SF TF09 MXX 87SF TF13 MXX 88SF TF19 MXX 86VN 1010 MXX 86VN 1015 MXXS_01 86VN 1025 MXX 87VN 1315 MXX 87VN 1325 MXX 86VN 1010 MXXS_01 86VN 1310 MXX 87VN 1310 MXX 87VN 1710 MXX 86VN XX05 MXX 86VN XX10 MXX 86VN XX15 MXX 86VN XX20 MXX 87VN XX10 MXX 87VN XX15 MXX 87VN XX20 MXX 87VN XX25 MXX 25 25 25 25 25 25 25 25 25 25 25 25 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 System with SaFE-LOCKTM Technology Please consider our security advices on the pages 6/7 11 Low Pressure Mould Connections EUROPEAN Nominal Diameter RECTUS Series 6/9/13 10 /11 / 12 Technical Description The 10, 11 and 12 Rectus Moldtite coupling series were especially developed for con- necting coolant lines and in- jection moulds. These stand out for their convenient, single- handed operation and a reliable O-ring seal. Widely used in Europe. Material Coupling Back Body Valve Body Sleeve Sleeve Valve Locking Balls Spring Seal Plug Plug Profile Back Body Valve Spring Seal Advantages Available in single shut-off, double shut-off or straight- through versions also available with SAFE-LOCKTM-technology. The straight-through couplings are equipped with nickel plated sleeves for quick and accurate visual differentiation. The angular connections prevent kinks from forming in the hose. Available Valves Brass Brass Brass (with Valve) Brass, Nickel Plated (without Valve) Brass AISI 420 AISI 301 FKM Working Pressure: PB = 15 bar, maximum static working pressure with safety factor of 4 to 1. Working Temperature* -15°C up to +200°C (FKM) depending on the medium. *At a temperature below -15°C and above +200°C special seals are available on request. Chart 10KBSB Kv=0,62 10KBSF Kv=0,72 10KFSF Kv=1,32 Flow Rate l/min 6,0 5,0 4,0 3,0 2,0 1,0 0,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0 Flow Rate l/min Brass Brass Brass Brass AISI 301 FKM Nickel Plated Brass, Nickel Plated Brass, Nickel Plated Brass AISI 301 FKM Stainless Steel AISI 303 11KBSB Kv=1,28 11KBSF Kv=1,7 11KFSF Kv=4,23 0 50 100 150 200 Flow Rate l/min 12KBSB Kv=2,37 12KBSF Kv=3,2 12KFSF Kv=9 0 100 200 300 400 Couplings RECTUS Series 10 /11/12 DN D L1 L2 Series Connec- tiona L D1 D2 Valve Part Number PU DS Hex SW mm mm mm mm mm mm Male Thread DS = Delivery Status: in stock on short call medium term delivery 12 6 10 M 14 x 1,5 G 1/4 G 3/8 17 17 19 48 48 48 18 18 18 9 9 9 with without with without with without 10KB aM14 MVX 10KF aM14 MVX 10KB aW13 MVX 10KF aW13 MVX 10KB aW17 MVX 10KF aW17 MVX 10 10 10 10 10 10 Pressure Drop (bar) Pressure Drop (bar) Pressure Drop (bar) 90% of actual size Low Pressure Mould Connections Couplings RECTUS Series 10 /11/12 DN Series Connec- tiona Hex L D L1 L2 D1 D2 Valve SW mm mm mm mm mm mm Part Number PU DS 9 13 Male Thread 6 9 Male Thread 6 9 13 Male Thread 90° 6 9 13 11 12 10 11 10 11 12 10 11 12 G 1/4 M 16 x 1,5 G 3/8 G 1/2 G 1/2 M 24 x 1,5 G 3/4 G 1/4 M 14 x 1,5 G 3/8 G 1/4 M 16 x 1,5 G 3/8 G 1/2 G 1/4 M 14 x 1,5 M 16 x 1,5 M 24 x 1,5 G 1/4 M 14 x 1,5 M 16 x 1,5 M 24 x 1,5 22 22 22 22 30 30 30 17 17 19 22 22 22 22 17 17 22 30 17 17 22 30 51,5 51,5 51,5 51,5 74 78 78 52,5 52,5 52,5 62 62 62 65 47 47 53,5 80 47 47 53,5 80 23 23 23 23 32 32 32 18 18 18 24 24 24 24 18 18 23 32 18 18 23 32 9 9 9 12 12 16 16 9 9 9 9 9 9 12 12 12 12 18 9 9 9 18 with without with without with without with without with without with without with without with without with without with without with without with without with without with without with without with without with without with without with without with without with without with Male Thread 45° System with SaFE-LOCKTM Technology Please consider our security advices on the pages 6/7 without 11KB aW13 MVX 11KF aW13 MVX 11KB aM16 MVX 11KF aM16 MVX 11KB aW17 MVX 11KF aW17 MVX 11KB aW21 MVX 11KF aW21 MVX 12KB aW21 MVX 12KF aW21 MVX 12KB aM24 MVX 12KF aM24 MVX 12KB aW26 MVX 12KF aW26 MVX 10KB aW13 MVXSL 10KF aW13 MVXSL 10KB aM14 MVXSL 10KF aM14 MVXSL 10KB aW17 MVXSL 10KF aW17 MVXSL 11KB aW13 MVXSL 11KF aW13 MVXSL 11KB aM16 MVXSL 11KF aM16 MVXSL 11KB aW17 MVXSL 11KF aW17 MVXSL 11KB aW21 MVXSL 11KF aW21 MVXSL 10KB AR13 MVX 10KF AR13 MVX 10KB AR14 MVX 10KF AR14 MVX 11KB AR16 MVX 11KF AR16 MVX 12KB AR24 MVX 12KF AR24 MVX 10KB AH13 MVX 10KF AH13 MVX 10KB AH14 MVX 10KF AH14 MVX 11KB AH16 MVX 11KF AH16 MVX 12KB AH24 MVX 12KF AH24 MVX 10 10 10 10 10 10 10 10 5 5 10 10 5 5 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 13 Low Pressure Mould Connections 14 Couplings RECTUS Series 10 /11/12 Female Thread Hose Barb Hose Barb Hose Barb 90° Hose Barb 90° Hose Barb 45° DS = Delivery Status: 6 10 9 11 6 10 9 11 13 12 6 10 9 11 6 10 9 11 13 12 6 10 9 11 6 10 9 11 13 12 with 10KB IW13 MVX 10 without 10KF IW13 MVX 10 with 10KB IW17 MVX 10 without 10KF IW17 MVX 10 with 11KB IW13 MVX 10 without 11KF IW13 MVX 10 with 11KB IM16 MVX 10 without 11KF IM16 MVX 10 with 11KB IW17 MVX 10 without 11KF IW17 MVX 10 with 10KB TF09 MVX 10 without 10KF TF09 MVX 10 with 11KB TF13 MVX 10 without 11KF TF13 MVX 10 with 12KB TF19 MVX 5 without 12KF TF19 MVX 5 with 10KB TF09 MVXSL 10 without 10KF TF09 MVXSL 10 with 11KB TF13 MVXSL 10 without 11KF TF13 MVXSL 10 with 10KB TR09 MVX 10 without 10KF TR09 MVX 10 with 11KB TR13 MVX 10 without 11KF TR13 MVX 10 with 12KB TR19 MVX 5 without 12KF TR19 MVX 5 with 10KB TR09 MVXSL 10 without 10KF TR09 MVXSL 10 with 11KB TR13 MVXSL 10 without 11KF TR13 MVXSL 10 with 10KB TH09 MVX 10 without 10KF TH09 MVX 10 with 11KB TH13 MVX 10 without 11KF TH13 MVX 10 with 12KB TH19 MVX 5 without 12KF TH19 MVX 5 medium term delivery in stock on short call DN Series Connec- Hex L D L1 L2 D1 D2 Valve Part Number PU DS tiona G 1/4 G 3/8 G 1/4 M 16 x 1,5 G 3/8 9 mm 13 mm 19 mm 9 mm 13 mm 9 mm 13 mm 19 mm 9 mm 13 mm 9 mm 13 mm 19 mm SW mm mm mm mm mm mm 17 41 18 10 19 45 18 10 21 46,5 23 10 21 46,5 23 10 21 46,5 23 10 52 18 22 61,5 23 25 90 32 32 60 18 22 71 24 25 41 18 22 51 23 28,5 78 32 32 53,5 18 22 63,5 24 28,5 52 18 22 51 23 25 78 32 30 L1 Low Pressure Mould Connections Couplings RECTUS Series 10 /11/12 Hex L D L1 L2 D1 D2 Valve Part Number PU DS SW mm mm mm mm mm mm DN Series Connec- tiona 6 9 Hose Barb 45° Plugs RECTUS Series 10 /11/12 Version Valve Part Number PU DS DN Series Connec- tiona Hex L D L1 L2 SW mm mm mm mm 6 Male Thread 9 Male Thread 13 10 11 10 11 12 9 mm 13 mm M 8 x 0,75 M 10 x 1 G 1/8 M 12 x 1,5 G 1/4 G 1/4 G 1/4 M 14 x 1,5 M 14 x 1,5 G 3/8 G 1/8 G 1/4 G 1/4 G 1/4 M 14 x 1,5 M 16 x 1,5 M 16 x 1,5 G 3/8 G 3/8 G 3/8 G 1/2 M 24 x 1,5 M 24 x 1,5 G 3/4 G 3/4 11 11 11 14 15 15 15 15 15 17 14 15 15 15 15 17 17 17 17 17 22 27 27 27 27 60 60,5 24 24 24 27 29 26 26 29 26 30 25 31 26 26 26 30 26 30 26 26 47 51 51 51 51 18 24 9 9 9 9 9 9 9 9 9 9 13,5 13,5 13,5 13,5 13,5 13,5 13,5 13,5 13,5 13,5 19 19 19 19 19 22 25 7 7 7 10 12 9 9 12 9 10 8 12 9 9 9 12 9 12 9 9 12 16 16 16 16 Brass aISI 303 Brass aISI 303 Nickel Pl. aISI 303 Brass Nickel Pl. Nickel Pl. aISI 303 Brass Brass Nickel Pl. Nickel Pl. Nickel Pl. Nickel Pl. aISI 303 Brass Brass Brass Nickel Pl. Nickel Pl. aISI 303 Nickel Pl. Brass Brass Nickel Pl. Nickel Pl. with without with without without without without without without without without with without without with without without without with without without without with without with without without without with without with without 10KB TH09 MVXSL 10KF TH09 MVXSL 11KB TH13 MVXSL 11KF TH13 MVXSL 10SF aM08 MXX 10SF AM08 RXX 10SF aM10 MXX 10SF AM10 RXX 10SF aW10 MXN 10SF AW10 RXX 10SF aM12 MXX 10SB aW13 MVN 10SF aW13 MXN 10SF AW13 RXX 10SB aM14 MVX 10SF aM14 MXX 10SF aW17 MXN 11SF aW10 MXN 11SB aW13 MVN 11SF aW13 MXN 11SF AW13 RXX 11SF aM14 MXX 11SB aM16 MVX 11SF aM16 MXX 11SB aW17 MVN 11SF aW17 MXN 11SF AW17 RXX 12SF aW21 MXN 12SB aM24 MVX 12SF aM24 MXX 12SB aW26 MVN 12SF aW26 MXN 10 10 10 10 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 System with SaFE-LOCKTM Technology Please consider our security advices on the pages 6/7 15 Low Pressure Mould Connections Plugs RECTUS Series 10 /11/12 DN Series Connec- tiona Hex L D L1 L2 SW mm mm mm mm Version Valve Part Number PU DS Male Thread 90° Female Thread Hose Barb continuous Male Thread DS = Delivery Status: in stock on short call medium term delivery 16 6 9 13 6 9 6 9 13 6 9 10 11 12 10 11 10 11 12 10 11 M 8 x 0,75 M 10×1 G 1/8 G 1/4 G 1/4 M 14 x 1,5 G 3/8 G 1/2 M 24 x 1,5 G 1/8 G 1/4 G 1/4 9 mm 9 mm 13 mm 13 mm 19 mm G 1/8 G 1/4 G 1/4 G 3/8 11 11 11 11 15 15 15 24 24 11 16 16 11 14 14 19 27 27 27 27 34 34 34 47 47 24 27 33 38 41 41 61 61 100 100 100 100 9 9 9 9 13,5 13,5 13,5 19 19 9 9 13,5 9 13,5 13,5 19 19 9 9 13,5 13,5 9 9 9 9 11 11 11 16 16 7 8 8 22 25 25 32 32 60 60 60 60 28,5 28,5 28,5 28,5 32 32 32 54 54 Brass Brass Nickel Pl. Nickel Pl. Nickel Pl. Brass Nickel Pl. Nickel Pl. Brass Nickel Pl. Nickel Pl. Nickel Pl. Brass Brass Brass Brass Brass Brass Brass Brass Brass without without without without without without without without without without without without without without without without without without without without without 10SF AR08 MXX 10SF AR10 MXX 10SF AR10 MXN 10SF AR13 MXN 11SF AR13 MXN 11SF AR14 MXX 11SF AR17 MXN 12SF AR21 MXN 12SF AR24 MXX 10SF IW10 MXN 10SF IW13 MXN 11SF IW13 MXN 10SF TF09 MXX 11SF TF09 MXX 11SF TF13 MXX 12SF TF13 MXX 12SF TF19 MXX 10VN 1010 MXX 10VN 1310 MXX 11VN 1310 MXX 11VN 1710 MXX 25 25 25 25 25 25 25 5 5 25 25 25 25 25 25 5 5 10 10 10 10 Low Pressure Mould Connections Extension Plugs RECTUS Series 10 /11/12 Hex L D L1 L2 Version Valve Part Number PU DS SW mm mm mm mm DN Series Connec- tiona 6 9 without Thread 13 10 11 12 8 mm 8 mm 10 mm 10 mm 10 mm 14 mm 14 mm 14 mm 21 mm 21 mm 9 9 11 11 11 15 15 15 22 22 63 100 120 240 360 150 300 450 500 800 9 9 9 9 9 13,5 13,5 13,5 19 19 42 79 100 220 340 125 275 425 465 765 Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass without without without without without without without without without without 10VN XX063 MXX 10VN XX10 MXX 10VN XX12 MXX 10VN XX24 MXX 10VN XX36 MXX 11VN XX15 MXX 11VN XX30 MXX 11VN XX45 MXX 12VN XX50 MXX 12VN XX80 MXX 10 10 10 10 10 10 10 10 10 10 Please consider our security advices on the pages 6/7 17 Low Pressure Mould Connections 18 FRENCH Chart Flow Rate l/min 612KF Kv=7,92 0 50 100 150 200 250 300 Flow Rate l/min Couplings Plug Plug Brass, Nickel Plated AISI 420 AISI 301 FKM Brass, Nickel Plated Female Thread DS = Delivery Status: in stock on short call medium term delivery Nominal Diameter 8/12 RECTUS Series 608/612 Working Pressure: PB = 20 bar, maximum static working pressure with safety factor of 4 to 1. Working Temperature* -15°C up to +200°C (FKM) depending on the medium. *At a temperature below -15°C and above +200°C special seals are available on request. Technical Description The 608/612 series (French series) has been specially de- veloped for cooling in the field of plastic injection machines / moulds. Using vertical plug inserts, the cooling connection can be installed directly in the mould/machine, so the exter- nal contour has no predruding extension components. This allows easy and safe handling during the work process and prevents damage to the coup- ling and the mould. This system is supplied as a “straight-through coupling“ with no valves. Coding of the in and outlets can be represented by simple fixing of the coloured clips/rings onto the coupling and plug. Material Coupling Body Locking Balls Spring Seal Advantages The use of the locking balls means that an optimum grip of the plug connection is gua- ranteed, even with forces that are applied laterally. The simple unlocking me- chanism, which is optimised by knurling at the end of the sleeve, can be operated by pulling back once on the sleeve. DN Series 8 608 Connec- Hex L tiona G 1/4 D2 Valve Part Number without 608KF IW13 MVN 10 Available Valves Pressure Drop (bar) Pressure Drop (bar) 90% of actual size Low Pressure Mould Connections L1 L2 SW mm mm mm mm mm mm D 17 54 20 10 D1 PU DS RECTUS Series 608 / 612 Low Pressure Mould Connections Couplings RECTUS Series 608 / 612 Plugs RECTUS Series 608 / 612 Hose Barb Push-Lok tiona 8 mm 10 mm 12 mm 13 mm 16 mm 10 mm 13 mm 10 mm 12 mm 13 mm 16 mm 10 mm 12 mm 13 mm 16 mm SW mm mm mm mm mm mm 65 20 28 65 20 28 65 20 28 77 28 33 77 28 33 61,5 20 24,5 65 20 28 51 20 20 51 20 20 59 28 25 62 28 25 51 20 20 51 20 20 55 28 25 55 28 25 without without without without without without without without without without without without without without without 608KF TF08 MVN 10 608KF TF10 MVN 10 608KF TF12 MVN 10 612KF TF13 MVN 10 612KF TF16 MVN 10 608KF TP10 MVN 10 608KF TP13 MVN 10 608KF TR10 MVN 10 608KF TR12 MVN 10 612KF TR13 MVN 5 612KF TR16 MVN 5 608KF TH10 MVN 10 608KF TH12 MVN 10 612KF TH13 MVN 5 612KF TH16 MVN 5 Hose Barb 90° Hose Barb 45° Male Thread DN 8 608 12 612 8 608 8 608 12 612 8 608 12 612 Part Number PU DS DN 8 12 Series Connec- Hex L D L1 Part Number PU DS Series Connec- Hex L D L1 L2 D1 D2 Valve 608 612 6 32 21 10 6 32 21 10 8 33 21 12 8 24 21 13 10 41 32 13 14 44 32 16 14 32 32 19 without without without without without without without 608SF aM10 MXN 25 608SF aW10 MXN 25 608SF aW13 MXN 25 608SF aW17 MXN 25 612SF aW17 MXN 10 612SF aW21 MXN 10 612SF aW26 MXN 10 tiona M 10 x 1 G 1/8 G 1/4 G 3/8 G 3/8 G 1/2 G 3/4 L2 D1 D2 Valve SW mm mm mm mm mm mm Please consider our security advices on the pages 6/7 19 Plugs RECTUS Series 608 / 612 DN Series Connec- tiona Hex L D L1 L2 D1 D2 Valve SW mm mm mm mm mm mm Part Number PU DS Male Thread 90° Male Thread 45° Female Thread Extension Plugs Male Thread 8 12 DN RECTUS Series 608 / 612 Series Connec- tiona D1 D2 Valve Part Number PU DS Hex L SW mm mm mm mm mm mm D L1 L2 Color Clip for Couplings DN Series RECTUS Series 608 / 612 Color Part Number PU DS DHX 608 KXX KXB DS = Delivery Status: in stock on short call medium term delivery 20 8 6 8 8 12 608 608 608 612 608 608 612 R 1/8 G 1/4 G 3/8 R 1/8 R 1/4 G 1/8 G 1/4 G 3/8 G 1/2 G 1/8 G 1/8 G 1/8 G 1/4 G 1/4 G 1/4 G 1/4 6 8 12 12 6 6 6 8 8 8 8 34 37 37 33 35 35 40 49 50 50 100 150 50 100 150 200 Clip for Coupling Clip for Coupling Clip for Coupling Clip for Coupling Clip for Coupling Clip for Coupling 22 22 22 22 22 21 21 32 32 21 21 21 21 21 21 21 11 13 13 10,5 13 10 14 14 14 28 60 60 28 60 60 60 33 33 33 red blue black red blue black without without without without without without without without without without without without without without without without 608SF AR10 MXN 608SF AR13 MXN 608SF AR17 MXN 608SF AH10 MXN 608SF AH13 MXN 608SF IW10 MXN 608SF IW13 MXN 612SF IW17 MXN 612SF IW21 MXN 608VN 1005 MXN 608VN 1010 MXN 608VN 1015 MXN 608VN 1305 MXN 608VN 1310 MXN 608VN 1315 MXN 608VN 1320 MXN DHX 608 KXX KXR DHX 608 KXX KXB DHX 608 KXX KXS DHX 612 KXX KXR DHX 612 KXX KXB DHX 612 KXX KXS 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Low Pressure Mould Connections Color Clip for Plugs RECTUS Series 608 / 612 Color Part Number PU DS DN Series DHX 608 SXX KXB 8 608 12 612 Clip for Plugs Clip for Plugs Clip for Plugs Clip for Plugs Clip for Plugs Clip for Plugs red blue black red blue black DHX 608 SXX KXR DHX 608 SXX KXB DHX 608 SXX KXS DHX 612 SXX KXR DHX 612 SXX KXB DHX 612 SXX KXS 10 10 10 10 10 10 Please consider our security advices on the pages 6/7 21 Low Pressure Mould Connections FRENCHMATIC I Nominal Diameter RECTUS Series 6/9/12/16 6006/6009/6012/6016 Technical Description This range of couplings was constructed with valves as an alternative to the French pro- files. All four nominal diameters in our Frenchmatic I range are available with single and double shut-off. Advantages The locking balls guarantee an optimum hold by the insert connection even with forces acting from the side. Optimum flow rate with abso- lute minimal flow resistance. Available Valves Working Pressure: PB = 20 bar, maximum static working pressure with safety factor of 4 to 1. Working Temperature* -15°C up to +200°C (FKM) depending on the medium. *At a temperature below -15°C and above +200°C special seals are available on request. Chart Single Shut-Off Flow Rate l/min Double Shut-Off Flow Rate l/min Couplings Material Coupling Body Locking Balls Spring Seal Plug Plug Profile Back Body Valve Spring Seal Brass, Nickel Plated AISI 420 AISI 301 FKM Series 6006/6009/6012 Brass, Nickel Plated Brass, Nickel Plated Brass AISI 301 FKM Series 6016 Steel, Zinc Plated Brass, Nickel Plated Brass AISI 301 FKM RECTUS Series 6006/6009/6012/6016 DN Hex SW mm mm mm mm mm mm Series Connec- tiona L D L1 L2 D1 D2 Valve Part Number PU DS Male Thread DS = Delivery Status: in stock on short call medium term delivery 22 6 9 12 16 6006 6009 6012 6016 G 1/4 G 3/8 G 1/2 G 3/4 17 22 30 34 54 61 74,5 90,5 20 24 32 38 9 9 12 16 with with with with 6006KB aW13 MVN 6009KB aW17 MVN 6012KB aW21 MVN 6016KB aW26 MVN 10 10 10 5 Pressure Drop (bar) Pressure Drop (bar) 80% of actual size Low Pressure Mould Connections Couplings RECTUS Series 6006/6009/6012/6016 Hex L D L1 L2 D1 D2 Valve Part Number PU DS SW mm mm mm mm mm mm DN Series Connec- tiona 6 9 12 Female Thread Hose Barb 16 6 9 12 16 6 9 Plugs RECTUS Series 6006/6009/6012/6016 Hose Barb 90° DN 16 12 Series Connec- tiona Hex L D L1 L2 SW mm mm mm mm Version Valve Part Number PU DS 9 12 Male Thread 6 9 6006 6009 6012 6016 6006 6009 6012 6016 6006 6009 6009 6012 6016 6006 6009 6012 G 1/4 G 3/8 G 1/2 G 3/4 8 mm 12 mm 16 mm 19 mm 8 mm 10 mm 12 mm G 1/2 R 1/2 G 3/4 R 3/4 G1 R 1/8 R 1/4 R 3/8 R 3/8 17 21 30 34 22 22 27 27 32 5 8 8 10 47 56 59,5 90,5 58 71 90,5 112,5 47 60,5 60,5 37 42 46 59 62 30 35 35 40 20 24 32 38 20 24 32 38 20 24 24 13,8 17,8 17,8 22,4 22,4 10 13,8 13,8 17,8 10 10 12 16 22 25 32 36 22 22 28,5 12 17 16 19 24 9 12 12 12 Brass Brass Brass Brass Brass Steel Steel Brass Brass Brass Brass with with with with with with with with with with with with without without with without without with without without without without 6006KB IW13 MVN 6009KB IW17 MVN 6012KB IW21 MVN 6016KB IW26 MVN 6006KB TF08 MVN 6009KB TF12 MVN 6012KB TF16 MVN 6016KB TF19 MVN 6006KB TR08 MVN 6009KB TR10 MVN 6009KB TR12 MVN 6009SB aW21 MVN 6009SF aW21 MXN 6012SF aK21 MXN 6012SB aW26 MVN 6012SF aW26 MXN 6016SF aK26 SXZ 6016SB aW33 SVZ 6006SF aK10 MXN 6009SF aK13 MXN 6009SF aK17 MXN 6012SF aK17 MXN 10 10 10 5 10 10 10 5 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Male Thread with Internal Hexagon Please consider our security advices on the pages 6/7 23 Low Pressure Mould Connections Plugs RECTUS Series 6006/6009/6012/6016 DN Series Connec- tiona Hex L D L1 L2 SW mm mm mm mm Version Valve Part Number PU DS Male Thread with additional Seal Female Thread DS = Delivery Status: 9 12 16 in stock on short call medium term delivery 24 6 9 12 16 6 6006 6009 6012 6016 6006 6009 6012 6016 G 1/8 G 1/4 G 3/8 G 1/2 G 3/8 G 1/2 G 3/4 G 3/4 G1 G 1/8 G 1/4 G 1/4 G 3/8 G 3/8 G 1/2 G 3/4 G 3/4 17 19 24 27 24 27 34 34 41 17 17 19 22 22 27 32 32 45 49 47 50 61 62 64 81 84 47 34 46 48 37 45 80,5 58 9,4 13,8 13,8 13,8 17,8 17,8 17,8 22,4 22,4 9,4 9,4 13,8 13,8 13,8 17,8 22,4 22,4 7 9 9 12 9 12 16 16 19 7 11 10 10 10 12 16 16 Brass Brass Brass Brass Brass Brass Brass Steel Steel Brass Brass Brass Brass Brass Brass Steel Steel with with with with with with with with with with without with with without without with with 6006SB aO10 MVN 6009SB aO13 MVN 6009SB aO17 MVN 6009SB aO21 MVN 6012SB aO17 MVN 6012SB aO21 MVN 6012SB aO26 MVN 6016SB aO26 SVZ 6016SB aO33 SVZ 6006SB IW10 MVN 6006SF IW13 MXN 6009SB IW13 MVN 6009SB IW17 MVN 6009SF IW17 MXN 6012SF IW21 MXN 6016SB IW26 SVZ 6016SF IW26 SXZ 10 10 10 10 10 10 10 5 5 10 10 10 10 10 10 5 5 Low Pressure Mould Connections RECTUS Series 006KL Technical Description Flatface coupling system for cooling circuits. Extremely low leakage when disconnecting and, at the same time, no air lock in the system. Use with cold water, hot water and with thermo-oil at temperatures of up to 200°C. Top efficiency with maximum flow and limited pressure drop. Tests with Oil Viscosity 32cSt at 40°C as per ISO 7241-2:2000 Flow Rate l/min Couplings Nominal Diameter 6.0 Male Thread 20 55,5 22 21 60,8 22 Male Thread with additional ED Seal Advantages Easy to handle with single- handed operation and the knurled sleeve design. Extremely durable due to the robust design. Working Pressure PB = 60 bar, maximum static working pressure with safety factor of 4 to 1. Working Temperature* -15°C up to +200°C (FKM) depending on the medium. *At a temperature below -15°C and above +200°C special seals are available on request. Brass Stainless Steel Stainless Steel Brass, Nickel Plated Stainless Steel Stainless Steel FKM, VMQ Stainless Steel Brass Brass, Nickel Plated Stainless Steel Available Valves Material Coupling Back Body Valve Body Sleeve Valve Spring, Locking Ring Locking Balls Seal Plug Plug Profile Back Body Valve Spring Seal DN 6 6 FKM Pressure Drop (bar) 80% of actual size Low Pressure Mould Connections Series 006 006 Connec- tiona M 16 x 1,5 G 1/4 D2 Valve Part Number 006KL aM16 MVX 10 006KL aO13 MVX 10 L2 D1 11 with 11 with Hex L D L1 SW mm mm mm mm mm mm PU DS RECTUS Series 006KL Please consider our security advices on the pages 6/7 FRENCHMATIC II 25 26 Couplings RECTUS Series 006KL Male Thread 90° Female Thread Hose Barb Valved Plugs Male Thread Male Thread 90° DS = Delivery Status: DN Series 6 006 6 006 Connec- tiona G 1/4 M 16 x 1,5 Hex L SW mm 19 55 16 57,8 D L1 L2 mm mm mm mm mm 12,5 11 12,5 11 PU DS in stock on short call DN Series 6 006 6 006 6 006 Connec- tiona M 16 x 1,5 G 1/4 10 mm Hex L SW mm 17 59,2 20 57,9 20 79,4 D L1 L2 D1 D2 mm mm mm mm mm 22 11 22 14 22 23 D1 D2 Valve Part Number with 006KL AR16 MVX 10 with 006KL IW13 MVX 10 with 006KL TP10 MVX 10 RECTUS Series 006KL Low Pressure Mould Connections Valve Part Number with 006SL aW13 MVX 10 with 006SL AR16 MVX 10 medium term delivery PU DS L Low Pressure Mould Connections RECTUS Series 08 Technical Description Multicoupling system as plate or individual component for connecting hose combinations. Special coupling body with PTFE coating giving greater robustness, lower coupling forces, and resistance to liquid media. The standard version consists of a floating plate fitted with 8 quick connect couplings, 2 handles and 2 locking couplings as well as a fixed plate fitted with 8 plugs and 2 locking bolts. The layout is asymmetrical to avoid mixing up the circulation systems. Nominal Diameter 8.1 Coupling Plate RECTUS Series 08 Female Thread 170 100 50 170 100 50 170 100 50 30 18 36 18 44 18 without 08KF IW21 SVN 1 with 08KL IW21 SVN 1 without 08KF TF09 SVN 1 with 08KL TF09 SVN 1 without 08KF TF13 SVN 1 with 08KL TF13 SVN 1 Hose Barb Advantages The safety locking system prevents unintentional dis- connection. Working Pressure PB = 15 bar, maximum static working pressure with safety factor of 4 to 1. Working Temperature* -20°C up to +100°C (NBR) -40°C up to +120/150°C (EPDM) -15°C up to +200°C (FKM) 0°C up to 316°C (FFKM) *At a temperature below -15°C and above +200°C special seals are available on request. Aluminium, elox. Brass, Nickel Plated Steel Hardened DNC-PTFE-coated Brass AISI 301 FKM AISI 301 Steel Hardened, Nickel Plated Aluminium, elox. Brass, Nickel Plated Steel Hardened DNC-PTFE-coated Brass AISI 301 FKM AISI 301 Steel Hardened, Nickel Plated Available Valves Material Coupling Plate Plate with 2 Handles 8 Multi Couplings Back Body Valve Body Inner Parts Springs Seals Locking Rings 2 Locking Couplings Plug Plate Plate 8 Multi-Plugs Back Body Plug Inner Parts Springs Seals Locking Rings 2 Locking Bolts DN 8,1 8,1 Series 08 08 Connec- tiona G 1/2 9 mm 13 mm Hex a B C D E SW mm mm mm mm mm mm L Valve Part Number PU DS Please consider our security advices on the pages 6/7 MULTI-MATIC 40% of actual size 27 28 Plug Plate RECTUS Series 08 Hose Barb DS = Delivery Status: in stock on short call Female Thread DN Series 8,1 08 Connec- tiona G 1/2 Hex a B C D E L SW mm mm mm mm mm mm 170 100 50 30 27 Valve Part Number PU DS Low Pressure Mould Connections 8,1 08 9 mm 13 mm 170 100 50 44 27 170 100 50 57 27 without 08SF TF09 SXN 1 with 08SL TF09 SVN 1 without 08SF TF13 SXN 1 with 08SL TF13 SVN 1 medium term delivery without 08SF IW21 SXN 1 with 08SL IW21 SVN 1 RECTUS Accessories Components Hose Tails RECTUS Components Connection a M 10 x 1 G 1/4 G 1/4 M 16 x 1,5 M 24 x 1,5 G 3/4 G 1/4 G 1/4 G 3/8 Connection a M 14 x 1,5 M 16 x 1,5 G 3/8 G 1/2 M 24 x 1,5 G 3/4 Connection D Hex L L1 L2 D1 D2 a1 mm SW mm mm mm mm mm Part Number PU DS M 8 x 0,75 G 1/8 M 12 x 1,5 M 14 x 1,5 G 3/8 Male Thread G 1/2 G 1/8 M 14 x 1,5 M 16 x 1,5 Female Thread Male x Male Nipples RECTUS Components M 14 x 1,5 G 1/4 M 16 x 1,5 G 1/2 G 1/2 G 3/4 Connection D Hex L a1 mm SW mm mm mm mm mm Part Number PU DS M 14 x 1,5 G 1/4 G 1/4 M 16 x 1,5 G 3/8 G 3/8 M 14 x 1,5 M 16 x 1,5 G 1/2 G 1/2 G 3/4 M 24 x 1,5 9 9 9 9 13 13 13 13 13 19 19 19 9 9 9 13 13 13 11 11 14 17 15 17 17 17 19 27 24 32 14 17 17 17 22 19 17 17 17 19 19 19 22 22 22 27 27 27 33,5 33,5 33 35 40 42 43 40 42 56 54 60 33 33 32 39 40 40 23 23 23 23 23 23 27 27 30 36 40 40 7 7 7 9 9 9 10 9 9 16 12 16 8 8 10 8 10,5 8 L1 L2 D1 D2 9 9 9 9 9 9 12 12 Male Thread Rectuloc-sealed, knurled Thread 12 16 16 16 9 9 9 9 9 9 9 9 12 12 16 16 GT 08/09 GT 10/09S_02 GT 10/09 GT 13/09 GT 12/13S_01 GT 13/13 GT 14/13 GT 16/13 GT 17/13 GT 24/19 GT 21/19 GT 26/19 GI 10/09 GI 13/09 GI 14/09 GI 13/13 GI 16/13 GI 17/13 DN 14/14S DN 13/14S DN 13/13S_09 DN 16/16S DN 16/17S DN 17/17S_06 DN 14/21S DN 16/21S DN 21/21S_08 DN 21/24S DN 26/26S_03 DN 24/26S 25 25 25 25 25 25 10 10 25 10 10 10 25 25 10 25 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Please consider our security advices on the pages 6/7 29 Low Pressure Accessories Male x Male Nipples, tapered RECTUS Components Connection a R 1/8 R 1/8 R 1/4 R 1/4 R 3/8 Connection a M 14 x 1,5 M 18 x 1,5 G 3/4 Connection a 10 mm 13 mm Connection a1 d Hex L L1 L2 D1 D2 mmSWmmmmmmmm mm Part Number PU DS Male Thread Reducing Bushes, short RECTUS Components Connection a1 L1 L2 D1 D2 D Hex L mmSWmmmmmmmm mm Part Number PU DS Male Thread Rectuloc-sealed, knurled Thread Extension Plugs Hose Barb RECTUS Components Connection a1 L1 L2 D Hex L mmSWmmmmmmmm mm D1 D2 Part Number PU DS Blanking Plugs with Internal Hexagon RECTUS Components Connection a G 1/8 G 1/4 G 3/8 Connection a1 D Hex L L1 L2 D1 D2 mmSWmmmmmmmm mm Part Number PU DS Male Thread with Copper-Washer 30 R 1/8 R 1/8 R 1/4 R 1/4 R 3/8 R 3/8 G 1/4 G 3/8 G 1/2 M 24 x 1,5 10 mm 13 mm M 10 x 1 M 12 x 1,5 M 14 x 1,5 G 1/2 G 1/8 M 10 x 1 G 1/4 M 14 x 1,5 G 3/8 G 1/2 M 16 x 1,5 6 6 6 6 9 9 9 9 12 12 12 6 8 9 9 14 14 17 18 19 22 26 17 17 19 22 24 27 27 11 11 15 15 5 5 6 6 6 8 10 50 100 150 200 50 100 150 200 100 150 200 11 11 13 14 18 24 24 120 240 150 300 11 11 15 15 15 15 18 7 7 9 9 12 16 16 8 8 12 12 12 12 14 10 10 14 14 DN 10K/50SZ DN 10K/100SZ DN 10K/150SZ DN 10K/200SZ DN 13K/50SZ DN 13K/100SZ DN 13K/150SZ DN 13K/200SZ DN 17K/100SZ DN 17K/150SZ DN 17K/200SZ RK 10/13S_07 RK M10/M14S RK 13/17S_09 RK M14/M18S RK 17/21S_08 RK 21/26S_08 RK M16/M24S VT 09XX12 MXX VT 09XX24 MXX VT 13XX15 MXX VT 13XX30 MXX VZ 10MS VZ 10NS VZ 12MS VZ 13NS VZ 14MS VZ 17NS_01 VZ 21NS 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 25 25 25 25 25 25 25 Low Pressure Accessories Blanking Plugs RECTUS Components Connection a M 10 x 1 M 12 x 1,5 M 14 x 1,5 G 1/2 M 10 x 1 M 12 x 1,5 M 14 x 1,5 G 1/2 M3 M6 M8 Connection a Connection D Hex L L1 L2 D1 D2 a1 mm SW mm mm mm mm mm Part Number PU DS M 8 x 0,75 G 1/8 G 1/4 G 3/8 Male Thread tapered, with Socket Pipe * Nickel Plated Male Thread cylindrical M 8 x 0,75 G 1/8 G 1/4 G 3/8 M4 M6 6 8 10 12 16 Ferrules RECTUS Components Connection D d a1 mm mm mm mm mm mm mm 15 16 18 19 20 22 23 29 4 5 5 6 7 7 8 10 4 5 5 6 7 7 8 10 10 10 10 13 13 13 13 19 8 8 8 8 10 10 10 10 8 8 8 8 10 10 10 10 11,5 11,5 14 14 16 3,5 3,5 4 4 4 L L1 L2 VK 08S VK 10S VK 10N* VK 12S VK 13N* VK 14S VZ 17N* VZ 21N* VZ 08MS VZ 10MS_01 VZ 10NS_01 VZ 12MS_01 VZ 13NS_01 VZ 14MS_01 VZ 17NS_02 VZ 21NS_01 VSS 6/M3 VSS 8/M4 VSS 10/M6 VSS 12/M6 VSS 16/M8 D1 D2 Part Number PU DS QH 1510 QH 1610 QH 1810 QH 1913 QH 2013 QH 2213 QH 2313 QH 2919 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 Please consider our security advices on the pages 6/7 31 Low Pressure Accessories Hose Clips RECTUS Components d L1 L2 D1 D2 Part Number PU DS mm mm mm mm mm Spread Height mm mm 10-16 16-27 30-45 Connection Connection a a1 D mm Crimper RECTUS Components D mm mmmmmmmmmm d L1 L2 D1 D2 Part Number PU DS Manifold Aluminium RECTUS Components Ports a D2 S H D1 L1 C N T K D L Color Part Number PU DS mm mm mm mm mm mm mm mm mm mm A D1 L1 KT NS H in stock D2 Both Ends Supplied without Couplings DS = Delivery Status: on short call medium term delivery 32 4 6 8 4 6 8 8-12 12-22 23-35 32-50 G 1/4 G 3/8 G 3/4 G1 8 9 9 9 10 10 13 43,2 55,9 43 54,1 4,5 7,1 10-36 38,1 50,8 38,1 38,1 31 40,6 5 6,9 57,2 63,5 114,3 190,5 266,7 152,4 254 355,6 190,5 266,7 342,9 228,6 330,2 431,8 Ka 0814 Ka 1016 Ka 1222 Ka 1627 Ka 2335 Ka 3045 Ka 3250 PM 10-36 blue red blue red blue red blue red blue red blue red VL 26/13 aB4 VL 26/13 AR4 VL 26/13 aB6 VL 26/13 AR6 VL 26/13 aB8 VL 26/13 AR8 VL 33/17 aB4 VL 33/17 AR4 VL 33/17 aB6 VL 33/17 AR6 VL 33/17 aB8 VL 33/17 AR8 50 50 50 50 50 50 50 1 1 1 1 1 C D L 1 1 1 1 1 1 1 1 Low Pressure Accessories RECTUS Hoses EPDM-Hoses RECTUS Hoses Part Number PU DS Medium max. Working Pressure Temperature Range D D1 mm mm Reference Ferrule Color Water Water PKR-Hoses Water Medium Oil Medium RECTUS Hoses Part Number PU DS RECTUS Hoses Part Number PU DS Oil Water Water Water 15 bar 15 bar 15 bar max. Working Pressure Temperature Range D D1 mm mm Reference Ferrule Color 15 bar 15 bar PVC-Hoses max. Working Pressure Temperature Range D D1 mm mm Reference Ferrule Color 15 bar 15 bar 15 bar up to +140°C up to +140°C up to +140°C up to +150°C up to +150°C up to +60°C up to +60°C up to +60°C 16,5 21,5 27 16 20 16 19 27 9,5 12,7 19 9,5 12,7 10 13 19 QH1810 QH1810 QH1810 QH2313 QH2313 QH2313 QH2919 QH2919 QH2919 QH1610 QH2213 QH1610 QH1610 QH1610 QH1913 QH1913 QH1913 QH2919 blue red black blue red black blue red black black black transparent blue red transparent blue red transparent MHE 1050 B MHE 1050 R MHE 1050 S MHE 1350 B MHE 1350 R MHE 1350 S MHE 1930 B MHE 1930 R MHE 1930 S MHN 1050 S MHN 1350 S MHP 1030 T MHP 1030 B MHP 1030 R MHP 1330 T MHP 1330 B MHP 1330 R MHP 1930 T 50 m 50 m 50 m 50 m 50 m 50 m 30 m 30 m 30 m 50 m 50 m 30 m 30 m 30 m 30 m 30 m 30 m 50 m Please consider our security advices on the pages 6/7 33 Low Pressure Hoses Silicone-Hoses RECTUS Hoses Part Number PU DS Medium max. Working Pressure Temperature Range D D1 mm mm Reference Ferrule Color with metallic tissue FKM- Hoses with metallic tissue DS = Delivery Status: Medium max. Working Pressure Temperature Range D D1 mm mm Reference Ferrule Color RECTUS Hoses Part Number PU DS in stock on short call medium term delivery 34 Water Water Oil/Water Oil/Water 15 bar 15 bar 15 bar 15 bar up to +170°C up to +170°C up to +200°C up to +200°C 15 19 15 19 10/9 13 10/9 13 QH 1510 QH 1510 QH 1510 QH 1913 QH 1913 QH 1913 QH 1510 QH 1510 QH 1510 QH 1913 QH 1913 QH 1913 silver blue red silver blue red silver blue red silver blue red MHS 1025 MHS 1025 B MHS 1025 R MHS 1325 MHS 1325 B MHS 1325 R MHF 1025 MHF 1025 B MHF 1025 R MHF 1325 MHF 1325 B MHF 1325 R 25 m 25 m 25 m 25 m 25 m 25 m 25 m 25 m 25 m 25 m 25 m 25 m Low Pressure Hoses Parker’s Motion & Control Technologies At Parker, we’re guided by a relentless drive to help our customers become more productive and achieve higher levels of profitabil- ity by engineering the best systems for their require- ments. It means looking at customer applications from many angles to find new ways to create value. What- ever the motion and control technology need, Parker has the experience, breadth of product and global reach to consistently deliver. No company knows more about motion and control technol- ogy than Parker. For further info call 00800 27 27 5374. AEROSPACE Key Markets • Aircraft engines • Business & general aviation • Commercial transports • Land-based weapons systems • Military aircraft • Missiles & launch vehicles • Regional transports • Unmanned aerial vehicles Key Products • Flight control systems & components • Fluid conveyance systems • Fluid metering delivery & atomization devices • Fuel systems & components • Hydraulic systems & components • Inert nitrogen generating systems • Pneumatic systems & components • Wheels & brakes CLIMATE CONTROL Key Markets • Agriculture • Air conditioning • Food, beverage & dairy • Life sciences & medical • Precision cooling • Processing • Transportation Key Products • CO2 controls • Electronic controllers • Filter driers • Hand shut-off valves • Hose & fittings • Pressure regulating valves • Refrigerant distributors • Safety relief valves • Solenoid valves • Thermostatic expansion valves ELECTROMECHANICAL Key Markets • Aerospace • Factory automation • Food & beverage • Life science & medical • Machine tools • Packaging machinery • Paper machinery • Plastics machinery & converting • Primary metals • Semiconductor & electronics • Textile • Wire & cable Key Products • AC/DC drives & systems • Electric actuators • Controllers • Gantry robots • Gearheads • Human machine interfaces • Industrial PCs • Inverters • Linear motors, slides and stages • Precision stages • Stepper motors • Servo motors, drives & controls • Structural extrusions PROCESS CONTROL Key Markets • Chemical & refining • Food, beverage & dairy • Medical & dental • Microelectronics • Oil & gas • Power generation Key Products • Analytical sample conditioning products & systems • Fluoropolymer chemical delivery fittings, valves & pumps • High purity gas delivery fittings, valves & regulators • Instrumentation fittings, valves & regulators • Medium pressure fittings & valves • Process control manifolds FILTRATION Key Markets • Food & beverage • Industrial machinery • Life sciences • Marine • Mobile equipment • Oil & gas • Power generation • Process • Transportation Key Products • Analytical gas generators • Compressed air & gas filters • Condition monitoring • Engine air, fuel & oil filtration & systems • Hydraulic, lubrication & coolant filters • Process, chemical, water & microfiltration filters • Nitrogen, hydrogen & zero air generators SEALING & SHIELDING Key Markets • Aerospace • Chemical processing • Consumer • Energy, oil & gas • Fluid power • General industrial • Information technology • Life sciences • Military • Semiconductor • Telecommunications • Transportation Key Products • Dynamic seals • Elastomeric o-rings • EMI shielding • Extruded & precision-cut, fabricated elastomeric seals • Homogeneous & inserted elastomeric shapes • High temperature metal seals • Metal & plastic retained composite seals • Thermal management FLUID & GAS HANDLING Key Markets • Aerospace • Agriculture • Bulk chemical handling • Construction machinery • Food & beverage • Fuel & gas delivery • Industrial machinery • Mobile • Oil & gas • Transportation • Welding Key Products • Brass fittings & valves • Diagnostic equipment • Fluid conveyance systems • Industrial hose • PTFE & PFA hose, tubing & plastic fittings • Rubber & thermoplastic hose & couplings • Tube fittings & adapters • Quick disconnects HYDRAULICS Key Markets • Aerospace PNEUMATICS Key Markets • Aerospace • Conveyor & material handling • Factory automation • Food & beverage • Life science & medical • Machine tools • Packaging machinery • Transportation & automotive Key Products • Air preparation • Compact cylinders • Field bus valve systems • Grippers • Guided cylinders • Manifolds • Miniature fluidics • Pneumatic accessories • Pneumatic actuators & grippers • Pneumatic valves and controls • Rodless cylinders • Rotary actuators • Tie rod cylinders • Vacuum generators, cups & sensors • • • • • • • • • Aerial lift Agriculture Construction machinery Forestry Industrial machinery Mining Oil & gas Power generation & energy Truck hydraulics Key Products • Diagnostic equipment • Hydraulic cylinders & accumulators • Hydraulic motors & pumps • Hydraulic systems • Hydraulic valves & controls • Power take-offs • Rubber & thermoplastic hose & couplings • Tube fittings & adapters • Quick disconnects  Parker Worldwide AE – UAE, Dubai Tel: +971 4 8127100 parker.me@parker.com AR – Argentina, Buenos aires Tel: +54 3327 44 4129 AT – Austria, Wiener Neustadt Tel: +43 (0)2622 23501-0 parker.austria@parker.com AT – Eastern Europe, Wiener Neustadt Tel: +43 (0)2622 23501 900 parker.easteurope@parker.com AU – Australia, Castle Hill Tel: +61 (0)2-9634 7777 AZ – Azerbaijan, Baku Tel: +994 50 2233 458 parker.azerbaijan@parker.com BE/LU – Belgium, Nivelles Tel: +32 (0)67 280 900 parker.belgium@parker.com BR – Brazil, Cachoeirinha RS Tel: +55 51 3470 9144 BY – Belarus, Minsk Tel: +375 17 209 9399 parker.belarus@parker.com CA – Canada, Milton, Ontario Tel: +1 905 693 3000 CH – Switzerland, Etoy Tel: +41 (0) 21 821 87 00 parker.switzerland@parker.com CL – Chile, Santiago Tel: +56 2 623 1216 CN – China, Shanghai Tel: +86 21 2899 5000 CZ – Czech Republic, Klecany Tel: +420 284 083 111 parker.czechrepublic@parker.com DE – Germany, Kaarst Tel: +49 (0)2131 4016 0 parker.germany@parker.com DK – Denmark, Ballerup Tel: +45 43 56 04 00 parker.denmark@parker.com ES – Spain, Madrid Tel: +34 902 330 001 parker.spain@parker.com FI – Finland, Vantaa Tel: +358 (0)20 753 2500 parker.finland@parker.com FR – France, Contamine s/arve Tel: +33 (0)4 50 25 80 25 parker.france@parker.com GR – Greece, athens Tel: +30 210 933 6450 parker.greece@parker.com HK – Hong Kong Tel: +852 2428 8008 HU – Hungary, Budapest Tel: +36 1 220 4155 parker.hungary@parker.com IE – Ireland, Dublin Tel: +353 (0)1 466 6370 parker.ireland@parker.com IN – India, Mumbai Tel: +91 22 6513 7081-85 IT – Italy, Corsico (MI) Tel: +39 02 45 19 21 parker.italy@parker.com JP – Japan, Tokyo Tel: +81 (0)3 6408 3901 KR – South Korea, Seoul Tel: +82 2 559 0400 KZ – Kazakhstan, almaty Tel: +7 7272 505 800 parker.easteurope@parker.com MX – Mexico, apodaca Tel: +52 81 8156 6000 MY – Malaysia, Shah alam Tel: +60 3 7849 0800 NL – The Netherlands, Oldenzaal Tel: +31 (0)541 585 000 parker.nl@parker.com NO – Norway, asker Tel: +47 66 75 34 00 parker.norway@parker.com NZ – New Zealand, Mt Wellington Tel: +64 9 574 1744 PL – Poland, Warsaw Tel: +48 (0)22 573 24 00 parker.poland@parker.com PT – Portugal, Leca da Palmeira Tel: +351 22 999 7360 parker.portugal@parker.com RO – Romania, Bucharest Tel: +40 21 252 1382 parker.romania@parker.com RU – Russia, Moscow Tel: +7 495 645-2156 parker.russia@parker.com SE – Sweden, Spånga Tel: +46 (0)8 59 79 50 00 parker.sweden@parker.com SG – Singapore Tel: +65 6887 6300 SK – Slovakia, Banská Bystrica Tel: +421 484 162 252 parker.slovakia@parker.com SL – Slovenia, Novo Mesto Tel: +386 7 337 6650 parker.slovenia@parker.com TH – Thailand, Bangkok Tel: +662 717 8140 TR – Turkey, Istanbul Tel: +90 216 4997081 parker.turkey@parker.com TW – Taiwan, Taipei Tel: +886 2 2298 8987 UA – Ukraine, Kiev Tel +380 44 494 2731 parker.ukraine@parker.com UK – United Kingdom, Warwick Tel: +44 (0)1926 317 878 parker.uk@parker.com US – USA, Cleveland Tel: +1 216 896 3000 VE – Venezuela, Caracas Tel: +58 212 238 5422 ZA – South Africa, Kempton Park Tel: +27 (0)11 961 0700 parker.southafrica@parker.com European Product Information Centre Free phone: 00 800 27 27 5374 (from AT, BE, CH, CZ, DE, EE, ES, FI, FR, IE, IL, IS, IT, LU, MT, NL, NO, PT, SE, SK, UK) © Rectus GmbH/480 – b.p 04/2009 Edition: March 2011 2. / CaT/3800-MOLD/UK Parker Hannifin Manufacturing Germany GmbH & Co. KG Quick Coupling Division Europe Daimlerstr. 7 71735 Eberdingen – Germany Phone +49 7042/100-0 Fax +49 7042/100-147 www.rectus.de