INDUSTRIAL DRY BREAK COUPLINGS 23 SERIES Featuring… Snap-tite quality with superior pressure and flow characteristics over the competition Snap-tite’s 23 Series is designed for demanding hydraulic applications. Typical applications include mobile equipment, hydraulic hand tools and in-plant hydraulics including test stands where a dry break is required for cleanliness. As protection against accidental disconnection, the 23 Series is equipped with a standard sleeve lock. The flush nipple valve aids in the prevention of system contamination by reducing the build up of dirt and grit. • Rugged construction • High strength steel with Zinc Trivalent Chromate plating = for corrosion resistance • Push-to-connect ball-locking mechanism for positive connection • Sizes 3/8″ & 1/2″ • Safety sleeve lock as standard • Connects against static pressures to 200 psi (14 bar) =Conforms with ROHS and WEEE European Union Directives TECHNICAL AND DIMENSIONAL INFORMATION A B C D E F IN MM IN MM IN MM IN MM IN MM IN MM 3/8″ 3.34 84.34 1.00 25.40 2.65 67.31 1.20 30.48 1.65 41.91 .94 23.88 1/2″ 4.53 114.06 1.25 31.75 3.36 85.34 1.50 38.10 2.38 6.45 1.06 26.92 SPILLAGE (cc) AIR INCLUSION (cc) MAXIMUM WORKING PRESSURE MINIMUM BURST PRESSURE PRESSURE RATINGS 01-0018BE-0608 Quick Disconnect & Valve Division 201 Titusville Road Union City, Pennsylvania 16438-8699 USA PH: 814-438-3821 FAX: 814-438-3069 e-mail: qd&v_sales@snap-tite.com www.snap-tite.com Industrial Estate Whitemill – Wexford Republic of Ireland PH: 353 53 914 1566 FAX: 353 53 914 1582 e-mail: ste_sales@snap-tite.com www.snap-tite.com PSI BAR PSI BAR FLOW CHART FLOW RATE (LPM) FLOW RATE (GPM) PRESSURE LOSS (PSI) PRESSURE LOSS (BAR) 88SSU (18cSt) oil .38 .76 1.14 1.51 1.89 2.27 2.65 3.03 3.41 3.79 7.57 11.36 15.14 18.93 22.71 26.50 30.28 34.07 37.85 75.70 113.60 2.07 1.38 .69 .62 .55 .48 .41 .34 .28 .21 .14 .07 .062 .055 .048 .041 .034 .027 .020 .013 .006 30 20 10 9 8 7 6 5 4 3 2 1 .9 .8 .7 .6 .5 .4 .3 .2 .1 .1 .2 .3 .4 .5 .6 .7 .8 .9 .1 2 3 4 5 6 7 8 9 10 20 30 3/8″ 1/2″ A C B D E F Coupling Assembly Coupler Nipple SIZE ! WARNING ! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND/OR PROPERTY DAMAGE. This document and other information from Snap-tite, Inc., its subsidiaries and authorized distributors, provides product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operation conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Snap-tite, Inc. and its subsidiaries at any time without notice. ISO-9001 Certified HOW TO ORDER PART NO. 23 -1C 6- 6 F End Fitting Seals Type F Female NPSF RP Female British Parallel BS2779 Series -1C Coupler N Nipple Coupling Half 23 6 = 3/8″ 8 = 1/2″ Coupling Size End Fitting Size 6 = 3/8″ 8 = 1/2″ No letter- Buna N V = Viton Notes: Hex dimensions from flat of hex. Part configurations are typical only. Ratings, specifications and dimensions are subject to change without notice. SIZE 3/8″ .03 .25 3,000 210 6,000 415 1/2″ .04 .30 3,000 210 6,000 415 Compact Couplings for Applications Requiring Minimal Air Inclusion or Spillage Both 28-1 and 29 Series are non-spill, push-to-connect couplings designed to fit in confined spaces. Their small envelope size and aluminum material option results in a compact, lightweight connection. The non-spill valving has minimal spillage and air inclusion while providing maximum flow with low pressure drop. The 28-1 Series is rated for pressures up to 1000 psi (69 bar) and is available in 1/4″-2″ body sizes. The 29 Series is rated for pressures up 5500 psi (379 bar) and is available in 1/8″-1-1/4″ body sizes. Both products have stainless steel and aluminum material options. 28-1 Series Features: • Low pressure drop • Push-to-connect • 1/4″ – 2″ size range • Lightweight compact design • Wide range of seal materials • Aluminum or stainless construction • Visual indicator confirms full connection • Low pressure drop • Push-to-connect • 1/8″ – 1-1/4″ size range • High pressure design • Wide range of seal materials • Aluminum or stainless construction 28-1 & 29 Series Compact, Light Weight Non-Spill Couplings Contact Information: Parker Hannifin Corporation Quick Coupling Division 8145 Lewis Road Minneapolis, MN 55427 phone 763 544 7781 fax 763 544 3418 qcd_sales@parker.com www.parker.com/quickcouplings 29 Series Features: 28-1 Series for pressures to 1000 psi (69 bar) 29 Series for pressures to 5500 psi (379 bar) Pressure Ratings Aluminum Stainless Steel PSI Bar PSI Bar Size Working Pressure Working Pressure Pressure ratings were established under static pressure conditions. Therefore, pressure ratings for any given flow, pressure surge and/ or vibration may vary these ratings. Proof pressure = 1.5 x working pressure Burst pressure = 2.5 x working pressure 1/4″ 1000 69 1000 69 3/8″ 1000 69 1000 69 1/2″ 1000 69 1000 69 5/8″ 1000 69 1000 69 3/4″ 1000 69 1000 69 1″ 1000 69 1000 69 1-1/4″ 600 41 600 41 1-1/2″ 600 41 600 41 2″ 600 41 600 41 28-1 Series Performance Data Pressure Loss vs. Flow FLOW RATE (LPM) PRESSURE LOSS (PSI) PRESSURE LOSS (BAR) 100 90 80 70 60 50 40 30 20 10 9 8 7 6 5 4 3 2 1 .07 .14 .21 .27 .34 .41 .48 .55 .62 .69 1.38 2.07 2.76 3.45 4.14 4.83 5.52 6.21 6.90 300 200 100 90 80 70 60 50 40 30 20 10 9 8 7 6 5 4 3 2 1 3.79 7.57 11.36 15.14 18.93 22.71 26.50 30.28 34.07 37.85 75.70 113.60 151.40 189.30 227.10 265.00 302.80 340.70 378.50 757.00 1135.50 1/4″ 3/8″ 1/2″ 5/8″ 3/4″ 1-1/4″ 1-1/2″ 2″ 1″ FLOW RATE (GPM) WATER1 Air Inclusion on Connect, Spillage on Disconnect Size Air Inclusion* Spillage in3 cc in3 cc 1/4″ .003 .05 .001 .01 3/8″ .011 .18 .002 .03 1/2″ .017 .28 .002 .04 5/8″ .019 .31 .008 .13 3/4″ .029 .48 .009 .15 1″ .049 .80 .018 .30 1-1/4″ .096 1.57 .024 .40 1-1/2″ .122 2.00 .043 .70 2″ .183 3.00 .061 1.00 * NOTE: Air inclusion at 0 psi (0 bar) internal pressure; spillage at 15 psi (1 bar) internal pressure. 1 Pressure loss vs. flow is in water with specific gravity of 1.0. For fluids with sg of .85 multiply by 1.58; for fluids with sg of .83 multiply by 1.60. Temperature 100°F (55°C). NOTE: Gallon shown are in U.S. gallons. Size Coupler Nipple A D Dia E Hex Across Flats B F Hex Across Flats A D Dia. E Hex Across Flats B F Hex Across Flats A D Dia E Hex Across Flats B F Hex Across Flats A D Dia. E Hex Across Flats Coupler Connected Nipple A D E Weight Length B F Weight in mm in mm in mm lb g in mm in mm in mm lb g 1/4″ 1.25 31.75 .88 22.35 .75 19.05 .05 22.68 1.80 45.72 1.10 27.94 .75 19.05 .02 4.54 3/8″ 1.44 36.58 1.12 28.45 1.00 25.40 .11 49.90 2.02 51.31 1.20 30.48 1.00 25.40 .05 9.07 1/2″ 1.61 40.89 1.34 34.04 1.13 28.70 .17 77.11 2.15 54.61 1.25 31.75 1.13 28.70 .06 27.22 5/8″ 1.70 43.18 1.58 40.13 1.38 35.05 .23 104.33 2.45 62.23 1.50 38.10 1.38 35.05 .14 63.50 3/4″ 2.05 52.07 1.80 45.72 1.50 38.10 .36 163.29 2.89 73.41 1.71 43.43 1.50 38.10 .15 68.04 1″ 2.70 68.58 2.32 58.93 2.00 50.80 .74 335.66 3.72 94.49 2.19 55.63 2.00 50.80 .29 131.54 1-1/4″ 2.56 65.02 2.63 66.80 2.25 57.15 .76 344.73 3.51 89.15 2.16 54.86 2.25 57.15 .30 136.08 1-1/2″ 3.03 76.96 2.96 75.18 2.63† 66.80† 1.33 603.28 3.75 95.25 2.16 54.86 2.63† 66.80† .33 149.69 2″ 3.55 90.17 3.92 99.57 3.25† 82.55† 1.97 893.58 4.73 120.14 2.84 72.14 3.25† 82.55† .36 163.29 28-1 Series Dimensions and Weights Size Typical Applications Include: • Low pressure hydraulic systems • High purity systems • Fuel systems • Cooling systems for electronics 1Weights are for aluminum. For Stainless Steel multiply aluminum weight by 2.7. All dimensions and weights are for reference only and are subject to change without notice. Dimension tolerances: A, B, D, E & F ± .03 in. (.76 mm); Connected length ± .06 in. (± 1.52 mm). †Two wrench flats. Pressure Ratings Aluminum Stainless Steel PSI Bar PSI Bar Size Working Pressure Working Pressure 1/8″ 4800 331 5500 379 1/4″ 3200 221 3800 262 3/8″ 3000 207 3200 221 1/2″ 2200 152 3000 207 1/2″ x 5/8″ 2200 152 3000 207 3/4″ 1200 83 2000 138 1″ 1000 69 1500 103 1-1/4″ 750 52 1000 69 Air Inclusion on Connect, Spillage on Disconnect * NOTE: Air inclusion at 0 psi (0 bar) internal pressure; spillage at 60 psi (4 bar) for 1/8″ and 15 psi (1 bar) internal pressure for 1/4″ through 1-1/4″. Pressure Loss vs. Flow FLOW RATE (LPM) PRESSURE LOSS (PSI) PRESSURE LOSS (BAR) FLOW RATE (GPM) WATER1 100 90 80 70 60 50 40 30 20 10 9 8 7 6 5 4 3 2 1 .07 .14 .21 .27 .34 .41 .48 .55 .62 .69 1.38 2.07 2.76 3.45 4.14 4.83 5.52 6.21 6.90 300 200 100 90 80 70 60 50 40 30 20 10 9 8 7 6 5 4 3 2 1 3.79 7.57 11.36 15.14 18.93 22.71 26.50 30.28 34.07 37.85 75.70 113.60 151.40 189.30 227.10 265.00 302.80 340.70 378.50 757.00 1135.50 1/8″ 1/4″ 3/8″ 1/2″ 5/8″ 3/4″ 1″ 1-1/4″ 1 Pressure loss vs. flow is in water with specific gravity of 1.0. For fluids with sg of .85 multiply by 1.58; for fluids with sg of .83 multiply by 1.60. Temperature 100°F (55°C). NOTE: Gallon shown are in U.S. gallons. Pressure ratings were established under static pressure conditions. Therefore, pressure ratings for any given flow, pressure surge and/ or vibration may vary these ratings. Proof pressure = 1.5 x working pressure Burst pressure = 2.5 x working pressure Size Air Inclusion* Spillage in3 cc in3 cc 1/8″ .002 .03 <.001 <.02 1/4" .002 .03 <.001 <.02 3/8" .002 .03 <.001 <.02 1/2" .012 .19 .007 .12 1/2" x 5/8" .012 .19 .007 .12 3/4" .008 .13 .005 .08 1" .008 .13 .005 .09 1-1/4" .012 .19 .007 .12 Coupler Nipple B F Hex Across Flats A D Dia. E Hex Across Flats B F Hex Across Flats A D Dia E Hex Across Flats B F Hex Across Flats A D Dia. E Hex Across Flats B F Hex Across Flats Size Coupler Connected Nipple A D E Weight Length B F Weight in mm in mm in mm lb g in mm in mm in mm lb g 1/8" 1.20 30.48 .88 22.35 .75 19.05 .05 22.68 1.71 43.43 1.07 27.18 .69 17.53 .03 13.61 1/4" 1.31 33.27 1.38 35.05 1.13 28.70 .13 58.97 2.01 51.05 1.30 33.02 1.13 28.70 .07 31.75 3/8" 1.57 39.88 1.63 41.40 1.25 31.75 .20 90.72 2.36 59.94 1.48 37.59 1.38 35.05 .10 45.36 1/2" 1.53 38.86 1.94 49.28 1.50 38.10 .42 190.51 2.64 67.06 1.76 44.70 1.63 41.40 .23 104.33 1/2" x 5/8" 1.53 38.86 1.94 49.28 1.50 38.10 .42 190.51 2.64 67.06 1.76 44.70 1.63 41.40 .23 104.33 3/4" 1.89 48.01 2.35 59.69 1.88 47.75 .49 222.26 2.81 71.37 2.09 53.09 1.88 47.75 .31 140.61 1" 2.45 62.23 2.44 61.98 2.13 54.10 .70 317.51 3.60 91.44 2.50 63.50 2.13 54.10 .36 163.29 1-1/4" 2.52 64.01 2.88 73.15 2.69† 68.33† .86 390.09 3.64 95.46 2.90 73.66 2.75† 69.85† .71 322.05 29 Series Dimensions and Weights Size 29 Series Performance Data Typical Applications Include: • High pressure hydraulic systems • High purity systems • Fuel systems • Cooling systems for electronics 1Weights are for aluminum. For Stainless Steel multiply aluminum weight by 2.7. All dimensions and weights are for reference only and are subject to change without notice. Dimension tolerances: A, B, D, E & F ± .03 in. (.76 mm); Connected length ± .06 in. (± 1.52 mm). †Two wrench flats. G-57 G-EB Wt.1 H Wt.1 J Wt.1 K Wt.1 M (Max) Wt.1 T Wt.1 in mm in mm lb g in mm lb g in mm lb g in mm lb g in mm lb g in mm lb g 57 MS33657 Bulkhead Flared EB SAE Bulkhead 15 MS33515 Bulkhead Flareless 56 MS33656 Male Flared EM Male SAE 14 MS33514 Male Flareless F Female NPTF RP Female British Parallel BS 2779 49 Female O-ring Boss MS33649 M Male NPT G H J K M T 1/8" .95 24.13 1.14 28.96 .01 4.53 .86 21.84 .01 4.53 .45 11.43 .01 4.53 .38 9.65 .01 4.53 .56 14.22 .01 4.53 .38 9.65 .01 4.53 1/4" 1.05 26.67 1.23 31.24 .01 4.53 .97 24.64 .01 4.53 .55 13.97 .01 4.53 .45 11.43 .01 4.53 .78 19.81 .02 9.07 .56 14.22 .01 4.53 3/8" 1.13 28.70 1.31 33.27 .01 4.53 1.02 25.91 .01 4.53 .56 14.22 .01 4.53 .47 11.94 .01 4.53 .88 22.35 .04 18.14 .56 14.22 .01 4.53 1/2" 1.28 32.51 1.47 37.34 .03 13.61 1.16 29.46 .02 9.07 .66 16.76 .01 4.53 .56 14.22 .01 4.53 1.05 26.67 .08 36.29 .75 19.05 .03 13.61 5/8" 1.42 36.07 1.61 40.89 .04 18.14 1.30 33.02 .03 13.61 .76 19.30 .02 9.07 .63 16.00 .02 9.07 1.05 26.67 .11 49.90 – – .03 13.61 3/4" 1.59 40.39 1.78 45.21 .06 27.22 1.41 35.81 .05 22.68 .86 21.84 .03 13.61 .69 17.53 .03 13.61 1.40 35.56 .13 58.97 .75 19.05 .03 13.61 1" 1.59 40.39 1.78 45.21 .09 40.82 1.41 35.81 .07 31.75 .91 23.11 .05 22.68 .69 17.53 .03 13.61 1.22 30.99 .19 86.18 .94 23.88 .06 27.22 1-1/4" 1.64 41.66 1.83 46.48 .14 63.50 1.41 35.81 .12 54.43 .96 24.38 .08 36.29 .69 17.53 .06 27.22 1.63 41.40 .29 131.54 .97 24.64 .09 40.82 1-1/2" 1.66 42.16 1.84 46.74 .17 77.11 1.41 28.19 .13 58.97 1.08 27.43 .11 49.90 .69 17.53 .07 31.75 1.65 41.91 .40 181.44 1.00 25.40 .11 49.90 2" 1.94 49.28 2.12 53.85 .21 95.25 1.61 40.89 .19 86.18 1.33 33.78 .15 68.04 .69 17.53 .10 45.36 1.90 48.26 .56 254.01 1.03 26.16 .16 72.57 28-1 and 29 Series End Fitting Configurations Size * Available 29 only † Available 28-1 only ** Standard seal in 28-1 Series Nitrile (AMS 3215) - no letter designation required Standard seal in 29 Series Nitrile (MIL-P-25732) - no letter designation required For other seal compounds, consult QCD A 28-1 C 8 - 8 F Material: A = Aluminum S = Stainless Steel Series: 28-1 29 Body: C = Coupler N = Nipple Coupler or Nipple Size: 2 = 1/8"* 4 = 1/4" 6 = 3/8" 8 = 1/2" 10 = 5/8"† End Fitting Size: 2 = 1/8" 4 = 1/4" 6 = 3/8" 8 = 1/2" 10 = 5/8" Seals**: A = Nitrile (AMS 3215) V = Fluorocarbon JF = Nitrile (MIL-P-5315) M = Nitrile (MIL-P-25732} E = Ethylene Propylene Ordering Information 12 = 3/4" 16 = 1" 20 = 1-1/4" 32 = 2" 12 = 3/4" 16 = 1" 20 = 1-1/4" 32 = 2"† End Fitting Type: 57 = MS33657 Bulkhead 15 = MS33515 Bulkhead 56 = MS33656 37° Male Flare 14 = MS33514 Male 49 = MS33649 Female F = Female NPTF RP = Female British Parallel BS 2779 M = Male NPT EM = SAE Male 37° Flare EB = SAE Bulkhead 1Weights are for aluminum. For Stainless Steel multiply aluminum weight by 2.7. Size Coupler Nipple Pressure Cap for Nipple 1/8" ADP29-2 ADC29-2 APC29-2 1/4" ADP29-4 ADC29-4 APC29-4 3/8" ADP29-6 ADC29-6 APC29-6 1/2" ADP29-8 ADC29-8 APC29-8 3/4" ADP29-12 ADC29-12 APC29-12 1" ADP29-16 ADC29-16 APC29-16 1-1/4" ADP29-20 ADC29-20 APC29-20 29 Series Dust Caps Standard Material = Aluminum Replace "A" in part number above with "S" for stainless steel Size Coupler Nipple 1/4" A28-1DCC-4 A28-1DCN-4 3/8" A28-1DCC-6 A28-1DCN-6 1/2" A28-1DCC-8 A28-1DCN-8 5/8" A28-1DCC-10 A28-1DCN-10 3/4" A28-1DCC-12 A28-1DCN-12 1" A28-1DCC-16 A28-1DCN-16 1-1/4" A28-1DCC-20 A28-1DCN-20 2" A28-1DCC-32 A28-1DCN-32 28-1 Series Dust Caps © 2013 Parker Hannifin Corporation Bulletin 3800-ST28-1&29 /USA 2500 5/13 QCD KP G G G GG H H H HH J J J JJ K K K KK M M M MM T T T TT Note: Not all configurations are standard product offering. Contact QCD for price and delivery. 71 Featuring...Snap-tite quality with superior pressure and flow characteristics over the competition. 71 Series -- Flush Face/Dry Break Couplings Flush Face/Dry Break — Air inclusion and fluid loss are held to a minimum to prevent spillage and contamination of systems. Push-to-Connect — Ideal one-hand operation when one half is mounted. Simply insert the nipple into the coupler and push-to-connect. To disconnect, retract the sleeve; and the coupling halves disconnect. Rugged — Heavy duty construction is ideally suited for high impulse applications. Pressure Capability — Designed for up to 10,000 psi (690 bar) operating pressures. Versatile — Available in steel with Zinc Trivalent Chromate plating=, 316 Stainless steel, as well as other materials. Special seals for troublesome media are available; consult factory for details. Available sizes — 1/8˝, 1/4˝, 3/8˝, 1/2˝, 3/4˝, 1˝, 1-1/4˝, 1-1/2˝ and 2˝. Superior flow and low pressure drop Sleeve lock — Designed to provide protection against accidental disconnection. Available with Autoclave cone and threaded fittings — Consult factory STEEL 316 STAINLESS STEEL HIGH PRESSURE STAINLESS STEEL PRESSURE RATINGS PSI BAR PSI BAR PSI BAR PSI BAR PSI BAR PSI BAR MAX. WORKING MIN. BURST* MAX. WORKING MIN. BURST* MAX. WORKING MIN. BURST* AIR SIZE SPILLAGE INCLUSION (INCHES) (CC) (CC) 1/8˝ .12 .02 10,000 689 22,000 1517 N/A N/A N/A N/A 1/4˝ .02 .01 10,000 689 20,000 1379 5,000 344 12,500 862 10,000 689 20,000 1379 3/8˝ x 1/4˝1 .02 .02 10,000 689 20,000 1379 5,000 344 12,500 862 10,000 689 20,000 1379 3/8˝ .02 .02 10,000 689 20,000 1379 5,000 344 12,500 862 10,000 689 20,000 1379 3/8˝ x 1/2˝2 .02 .02 10,000 689 20,000 1379 5,000 344 12,500 862 10,000 689 20,000 1379 1/2˝ .03 .03 10,000 689 20,000 1379 5,000 344 12,500 862 10,000 689 20,000 1379 3/4˝ .06 .04 7,500 517 15,000 1034 5,000 344 12,500 862 7,500 517 15,000 1034 1˝ .10 .06 7,500 517 15,000 1034 4,000 275 10,000 689 7,500 517 15,000 1034 1˝ x 1-1/4˝3 .10 .06 7,500 517 15,000 1034 4,000 275 10,000 689 7,500 517 15,000 1034 2˝ x 1-1/2˝4 5.25 30.50 5,000 344 10,000 689 3,000 206 6,000 413 5,000 344 10,000 689 2˝ 5.25 30.50 5,000 344 10,000 689 3,000 206 6,000 413 5,000 344 10,000 689 1Unit is 3/8˝ with 1/4˝ end fitting. 2Unit is 3/8˝ with 1/2˝ end fitting, 31˝ unit with 1-1/4˝ end fitting, and 42˝ unit with 1-1/2˝ end fitting. *NOTE: Pressure Ratings were established under static pressure conditions. For high impulse applications, multiply the above pressure ratings by .6 for approximate pressure ratings. The 71 Series couplings are designed for today’s applications including special features for modern needs - dry break, push-to-connect, high pressure, rugged & versatile. Extra large flow chambers and Snap-tite’s exclusive valve design permit exceptional flow while maintaining low pressure drop. =Conforms with ROHS and WEEE European Union Directives TECHNICAL AND DIMENSIONAL INFORMATION FLOW CHARTS *Hex dimensions are taken from flat of hex and not across corners. Hex may be substituted with round stock. Hex column would then indicate dimension taken across wrench flats. Decimal dimensions are ± .06 in. (1.5mm) Dimensions are subject to change without notice. Part configurations are typical and do not necessarily represent actual appearance. ††Note: 1/4˝ thru 1-1/4˝ are flush face couplings. 1/8˝, 1-1/2˝ & 2˝ maintain a recessed face on coupler half. 1/8˝ †† Size A B (HEX)* C (HEX)* D (DIA) E F G 1-1/2˝ 7.60 3.25 3.38 4.50 6.21 4.50 3.21 (mm) (193.04) (82.55) (85.85) (114.30) (157.73) (114.30) (81.53) 2˝ 7.60 3.25 3.38 4.50 6.21 4.65 3.21 (mm) (193.04) (82.55) (85.85) (114.30) (157.73) (118.20) (81.53) 1-1/2˝ & 2˝ †† Size A B (HEX)* C (HEX)* D (DIA) E F G 1/4˝ 3.27 0.81 0.94 1.19 1.96 1.84 0.53 (mm) (83.06) (20.57) (23.88) (30.23) (49.78) (46.74) (13.46) 3/8˝ 4.00 1.00 1.19 1.56 2.36 2.32 0.68 (mm) (101.60) (25.40) (30.23) (39.62) (59.95) (58.93) (17.27) 1/2˝ 4.43 1.50 1.50 1.88 2.77 2.38 0.72 (mm) (112.52) (38.10) (38.10) (47.75) (70.36) (60.45) (18.29) 3/4˝ 5.13 1.75 1.75 2.25 3.05 2.96 0.88 (mm) (130.30) (44.45) (44.45) (57.15) (77.47) (75.18) (22.35) 1˝ 5.60 1.88 2.00 2.63 3.32 3.23 0.95 (mm) (142.24) (47.75) (50.80) (66.80) (84.33) (82.04) (24.13) 1-1/4˝ 6.22 2.00 2.00 2.63 3.67 3.50 0.95 (mm) (157.99) (50.80) (50.80) (66.80) (93.22) (88.90) (24.13) 1/4˝ thru 1-1/4˝ †† Size A B (HEX)* C (HEX)* D (DIA) E F G 1/8˝ 2.71 .69 .81 .94 1.75 1.55 .59 (mm) (68.83) (17.53) (20.57) (23.88) (44.45) (39.37) (14.99) 1/8˝ X 1/4˝ 3.04 .69 .81 .94 2.12 1.51 .59 (mm) (77.22) (17.53) (20.57) (23.88) (53.85) (38.35) (14.99) † Gallons per minute (gpm) in US gallons † Connected length. 300 200 100 90 80 70 60 50 40 30 20 10 98 7 6 5 4 3 2 1 300 200 100 90 80 70 60 50 40 30 20 10 400 500 600 700 800 900 1000 2000 3000 20.69 13.79 6.90 6.21 5.52 4.83 4.14 3.45 2.76 2.07 1.38 .69 .62 .55 .48 .41 .27 .21 .14 .07 37.85 75.70 113.60 151.40 189.30 227.10 265.00 302.80 340.70 378.50 757.00 1514.00 1135.50 2271.00 1892.50 2649.50 3028.50 3406.50 3785.00 7570.00 11355.00 .34 1 - 1 /2" & 2 " Maximum Recommended Flow Rate FLOW RATE (lpm) FLOW RATE (gpm) HYDRAULIC FLUID PRESSURE LOSS (psi) PRESSURE LOSS (bar) 3000 2000 1000 900 800 700 600 500 400 300 200 100 90 80 70 60 50 40 30 20 10 .38 .76 1.14 1.51 1.90 2.27 2.65 3.03 3.41 3.80 7.57 15.14 11.36 22.71 18.93 26.50 30.28 34.07 37.85 75.70 113.55 1 / 8 " 206.90 137.93 68.97 62.07 55.17 48.28 41.38 34.48 27.59 20.69 13.79 6.90 6.21 5.52 4.83 4.14 2.76 2.07 1.38 .69 3.45 3 2 1.0 .9 .8 .7 .6 .5 .4 .3 .2 .1 4 5 6 7 8 9 10 20 30 Maximum Recommended Flow Rate FLOW RATE (lpm) FLOW RATE (gpm) HYDRAULIC FLUID PRESSURE LOSS (psi) PRESSURE LOSS (bar) 300 200 100 90 80 70 60 50 40 30 20 10 9 8 7 6 5 4 3 2 1 30 20 10 9 8 7 6 5 4 3 2 1 40 50 60 70 80 90 100 200 300 20.69 13.79 6.90 6.21 5.52 4.83 4.14 3.45 2.76 2.07 1.38 .69 .62 .55 .48 .41 .27 .21 .14 .07 3.79 7.57 11.36 15.14 18.93 22.71 26.50 30.28 34.07 37.85 75.70 151.40 113.60 227.10 189.30 265.00 302.80 340.70 378.50 757.00 1135.50 .34 1 /2" 3 /4 " 1 & 1- 1/4 " 3 /8" 1/ 4 " Maximum Recommended Flow Rate FLOW RATE (lpm) FLOW RATE (gpm) HYDRAULIC FLUID PRESSURE LOSS (psi) PRESSURE LOSS (bar) Test Media MIL-H-6083 Hydraulic Fluid at 90°F ±5°F (+32°C ±1.5°C) sg .83 DISTRIBUTED BY: ! WARNING ! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Snap-tite, Inc., its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operation conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Snap-tite, Inc. and its subsidiaries at any time without notice. 01-0003BE-0609 NOTES: 1. The new 71-3 style couplers and nipples are interchangeable with old-style couplers and nipples in sizes 3/8˝, 1/2˝ and 3/4˝. 2. Old style 1˝ couplers and nipples (71-2C16 and 71-2N16) are not interchangeable with new 71-3 style. Old style may be special ordered from the factory if interchangeability is an issue. 3. Spare parts kits are available for all styles in sizes 1/4˝ and 2˝. 4. Internal components of S and SH style 71 Series are not all 316 grade stainless steel. Consult factory for details. 5. Plastic cap can be used on either coupler or nipple. Material Series Coupling Coupling End Fitting End Fitting Seals Options Half Size Size Type No letter 71 C 2 = 1/8˝ 2 = 1/8˝ F* Autoclave Std. seal SL Steel, plated (1/8˝) Coupler 4 = 1/4˝ 4 = 1/4˝ Female cone & threaded is Buna Sleeve S (1-1/2˝ & N 6 = 3/8˝ 6 = 3/8˝ NPTF fittings available V= Lock 316 2˝ nipples) Nipple 8 = 1/2˝ 8 = 1/2˝ M† (consult factory) Viton Stainless 71-1 12 = 3/4˝ 12 = 3/4˝ Male NPT E= Steel (1-1/2˝ & 2˝ 16 = 1˝ 16 = 1˝ EF Ethylene SH couplers) 32 = 2˝ 20 = 1-1/4˝ Female Propylene High Pressure 71-3 24 = 1-1/2˝ SAE Rubber Stainless (1/4˝ 32 = 2˝ RP M= Steel thru Female MHO 1-1/4˝) British Parallel BS2779 HOW TO ORDER SIZE PSI BAR 1/8˝, 1/4˝ 300 21 3/8˝, 1/2˝, 3/4˝ 150 11 1˝, 1-1/4˝ 75 5 1-1/2˝, 2˝ 0 0 MAXIMUM RECOMMENDED CONNECT/DISCONNECT PRESSURES PRESSURE Size 71-3 Style 1/8˝ N/A 1/4˝ 71-PDC-4 3/8˝ 71-PDC-6 1/2˝ 71-PDC-8 3/4˝ 71-PDC-12 1˝ 71-PDC-16 PLASTIC DUST CAPS Part No. 71-3 C 4 4 F * For sizes up to 1˝ NPTF threads in steel. For sizes up to 1˝ NPSF threads in stainless steel. For sizes over 1˝ NPT threads. † Available on 1/8˝ coupling sizes only. Quick Disconnect & Valve Division 201 Titusville Road Union City, Pennsylvania 16438-8699 USA PH: 814-438-3821 FAX: 814-438-3069 e-mail: qd&v_sales@snap-tite.com www.snap-tite.com Industrial Estate Whitemill - Wexford Republic of Ireland PH: 353 53 914 1566 FAX: 353 53 914 1582 e-mail: ste_sales@snap-tite.com www.snap-tite.com ISO-9001 Certified COUPLER/NIPPLE DUST CAP ISO 16028 Interchange 74 SERIES – 2 – 74 Series — ISO 16028 Interchange Flush Face/Dry Break design facilitates easy cleaning prior to connection High strength steel construction Heavy duty Zinc Trivalent Chromate plating= for exceptional corrosion resistance Sizes - 1/4", 3/8", 1/2", 5/8", 3/4" & 1" (6.3, 10, 12.5, 16, 19 & 25 mm) Push-to-connect design Industry Interchangeability - couplers and nipples are interchangeable with other manufacturer's ISO 16028 couplings Connect Under Pressure Capability - currently available in 1/2" size in either coupler or nipple half 4:1 Safety factor 3/8" size also conforms to HTMA (Hydraulic Tool Manufacturers Association) standards Snap-tite's expanded 74 Series product line is designed to meet or exceed the requirements called out in ISO 16028. The 3/8" unit also meets or exceeds the requirements as established by HTMA specifications and defined by ANSI/NFPA T3.20.15-1991. In addition, Snap-tite's patented Series CP74 coupling is designed to meet a multitude of issues presently faced by users worldwide. Trapped pressure, whether residual or created by thermal expansion, prevents standard quick connect couplings from connecting as designed. Construction, portable hydraulic tools and utility equipment are a few of the many industries where connections made under pressure would save valuable time and money. Snap-tite's Series CP74 is "The Answer" to this dilemma. The connect under pressure (CP) option allows either coupling half to be placed on the pressurized portion of the hydraulic circuit with static pressure up to 3625 psi (250 bar). It can then easily connect to Snap-tite's 74 Series or any other ISO 16028 mate of the same size without damage to the coupling or endangering the environment with subsequent spillage. Durability, reliability and concern for the environment were considered when designing Snap-tite's 74 Series coupling featuring one hand, push-to-connect and disconnect convenience. Featuring…Snap-tite quality with superior pressure and flow characteristics over the competition. =Conforms with ROHS and WEEE European Union Directives – 3 – TECHNICAL INFORMATION FLOW RATE (LPM) PRESSURE LOSS (PSI) PRESSURE LOSS (BAR) FLOW RATE (GPM) 88 SSU (18cSt) oil FLOW RATE (GPM) 88 SSU (18cSt) oil FLOW CHARTS 74 Series CP74 Series PRESSURE LOSS (BAR) PRESSURE LOSS (PSI) FLOW RATE (LPM) 300 200 100 90 80 70 60 50 40 30 20 10 9 87 6 5 4 3 2 1 20.69 13.79 6.90 6.21 5.52 4.83 4.14 3.45 2.76 2.07 1.38 .69 .62 .55 .48 .41 .34 .27 .21 .14 .07 300 200 100 90 80 70 60 50 40 30 20 10 9 8 7 6 5 4 3 2 1 3.79 7.57 11.36 15.14 18.93 22.71 26.50 30.28 34.07 37.85 75.70 113.60 151.40 189.30 227.10 265.10 302.80 340.70 378.50 757.00 1135.50 3/8" 1/2" 5/8" 3/4" 1" 1/4" Size Spillage Operating Minimum Burst in mm cc psi bar psi bar 1/4" 6.3 0.020 4568 315 18,270 1260 3/8" 10 0.035 3625 250 14,500 1000 1/2" 12.5 0.070 3625 250 14,500 1000 5/8" 16 0.100 3625 250 14,500 1000 3/4" 19 0.150 3625 250 14,500 1000 1" 25 0.250 2900 200 11,600 800 PRESSURE RATINGS 3.79 7.57 11.36 15.14 18.93 22.71 26.50 30.28 34.07 37.85 75.70 113.60 151.40 189.30 227.10 265.00 302.80 340.70 378.50 757.00 1135.50 20.69 13.79 6.90 6.21 5.52 4.83 4.14 3.45 2.76 2.07 1.38 .69 .62 .55 .48 .41 .34 .27 .21 .14 .07 300 200 100 90 80 70 60 50 40 30 20 10 9 87 6 5 4 3 2 1 1 2 3 4 5 6 7 89 10 20 30 40 50 60 70 80 90 100 200 300 1/2" SIZE FLOW RATE (LPM) – 4 – CP74 CONNECT FORCE PRESSURE (bar) FORCE (lbf) FORCE (Newton) PRESSURE (psig) Pressure on Nipple Pressure on Coupler CP74 SERIES DIMENSIONAL INFORMATION CP74 catalog dimensions are the same regardless of end fitting. See page 6, "How to Order", for currently available standard end fittings. CP74 NOTE: The CP74 Series products operate slightly different from traditional dry break couplings. When making a connection with no pressure on the coupler and up to 3625 psi (250 bar) on the nipple, a slight pause during connections is required to allow trapped pressure to vent to the coupler before completing the connection. Partial connection followed by disconnection may result in damage to the coupling. 1/2" 3.55 1.55 3.80 1.38 1.51 0.68 (mm) 90.17 39.37 96.52 35.05 38.35 17.27 SIZE A B* C D E K *The "B" dimension is the body dimension. (The body is larger in diameter than the sleeve on CP74) All decimal dimensions are ± .030 in (0.76 mm) COUPLER ASSEMBLY NIPPLE ASSEMBLY A B* C K ENGAGEMENT D HEX O E A/C / NOTE: By comparison, it would take approximately 40 lbs (177.9 Newton) of force to connect a standard 1/2" ISO 16028 coupling with 200 psi (14 bar) internal pressure. 17.2 34.5 51.7 68.9 86.2 103.4 120.7 137.9 155.1 172.4 189.6 208.8 222 241.3 258.5 444.8 400.3 355.9 311.4 266.9 222.4 177.9 133.4 89 44.5 0 3750 3500 3250 3000 2750 2500 2250 2000 1750 1500 1250 1000 750 500 250 0 0 10 20 30 40 50 60 70 80 90 100 – 5 – -F 0.44 0.58 0.52 0.67 0.96 1.03 0.53 1.05 1.21 1.04 (mm) 11.18 14.73 13.21 17.02 24.38 26.16 13.46 26.67 30.73 26.42 -EF 0.44 0.58 0.52 0.67 0.72 0.83 0.53 1.05 1.19 1.04 (mm) 11.18 14.73 13.21 17.02 18.29 21.08 13.46 26.67 30.23 26.42 -RP 0.44 0.58 0.52 0.67 0.90 0.96 0.53 1.05 1.21 1.04 (mm) 11.18 14.73 13.21 17.02 22.86 24.38 13.46 26.67 30.73 26.42 -EM 1.05 1.03 1.09 1.09 1.26 1.26 1.34 1.32 1.51 1.58 (mm) 26.67 26.16 27.69 27.69 32.00 32.00 34.04 33.53 38.35 40.13 -EB 1.73 1.71 1.90 1.90 2.11 2.11 2.23 2.22 2.38 2.32 (mm) 43.94 43.43 48.26 48.26 53.59 53.59 56.64 56.39 60.45 58.93 1/4" 3/8" 1/2" 5/8" 3/4" 1" Coupler Nipple Coupler Nipple Coupler Nipple Coupler Nipple Coupler Nipple Coupler Nipple 1/4" 1.80 1.26 2.63 1.00 1.10 1.12 0.81 0.89 0.43 (mm) 45.72 32.00 66.80 25.40 27.94 28.45 20.57 22.61 10.92 3/8" 1.92 1.55 2.86 1.00 1.10 1.20 0.94 1.03 0.61 (mm) 48.77 39.37 72.64 25.40 27.94 30.48 23.88 26.16 15.49 1/2" 2.32 1.84 3.47 1.38 1.51 1.50 1.38 1.51 0.68 (mm) 58.93 46.74 88.14 35.05 38.35 38.10 35.05 38.35 17.27 5/8 2.07 1.98 3.36 1.50 1.65 1.69 1.50 1.65 0.69 (mm) 52.58 50.29 85.34 38.10 41.91 42.93 38.10 41.91 17.53 3/4" 3.08 2.27 4.47 1.75 1.93 1.81 1.63 1.80 0.88 (mm) 78.23 57.66 113.54 44.45 49.02 45.97 41.40 45.72 22.35 1" 2.93 2.55 4.55 2.00 2.20 2.25 1.88 2.06 0.93 (mm) 74.42 64.77 115.57 50.80 55.88 57.15 47.75 52.32 23.62 SIZE A B C D E F G H K BASIC END FITTING DIMENSIONS 74 SERIES DIMENSIONAL INFORMATION All decimal dimensions are ±.030 in. (0.76 mm) C / K (ENGAGEMENT) I A B G HEX O H A/C J D HEX O E A/C L / O/ F C / K (ENGAGEMENT) I A B G HEX O H A/C J L O/ F F, EF & RP END FITTINGS EM & EB END FITTINGS ORSB END FITTING 6-8F or RP 0.86 1.00 8-12EF 1.02 1.10 (mm) 21.84 25.40 (mm) 25.91 27.94 6-8EF 0.61 0.80 10-12F 1.10 1.09 (mm) 15.49 20.32 (mm) 27.94 27.69 8-10EF 0.89 0.97 10-12EF 1.10 1.09 (mm) 22.61 24.64 (mm) 27.94 27.69 8-10EM 1.18 1.20 10-12RP 1.04 1.03 (mm) 29.97 30.48 (mm) 26.42 26.16 8-10EB 2.02 2.04 10-12EM 1.39 1.39 (mm) 51.31 51.82 (mm) 35.31 35.31 8-10ORSB 1.70 1.71 10-12EB 2.28 2.28 (mm) 43.18 43.43 (mm) 57.91 57.91 Coupler Nipple Coupler Nipple OPTIONAL END FITTING DIMENSIONS Quick Disconnect & Valve Division 201 Titusville Road Union City, Pennsylvania 16438-8699 USA PH: 814-438-3821 FAX: 814-438-3069 e-mail: qd&v_sales@snap-tite.com www.snap-tite.com 01-0014BE-0109 HOW TO ORDER Special Series Coupling Coupling End Fitting End Fitting Seal Options Feature Half Size Size Type Material No letter 74 C 4 = 1/4˝ 4 = 1/4˝ F No letter for SL Std. 74 Series Coupler 6 = 3/8˝ 6 = 3/8˝ Female NPTF Buna N Sleeve CP* N 8 = 1/2˝ 8 = 1/2˝ RP (Code A) lock Connect Nipple 10 = 5/8˝ 10 = 5/8˝ Female British V under 12 = 3/4˝ 12 = 3/4˝ Parallel BS2779 Viton pressure 16 = 1˝ 16 = 1˝ EF option Female SAE EM Male SAE EB Bulkhead SAE ORSB Bulkhead O-ring Face Seal Industrial Estate Whitemill - Wexford Republic of Ireland PH: 353 53 914 1566 FAX: 353 53 914 1582 e-mail: ste_sales@snap-tite.com www.snap-tite.com ! WARNING ! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND/OR PROPERTY DAMAGE. This document and other information from Snap-tite, Inc., its subsidiaries and authorized distributors, provides product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operation conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Snap-tite, Inc. and its subsidiaries at any time without notice. *CP74 feature currently only available in 1/2” (8) body size with end fitting sizes and types: -8F, -8RP, -8EF, -10EF and -12EF. Size Coupler/Nipple Dust Cap ACCESSORIES 1/4 74PDC-4 3/4 74PDC-6 1/2 74PDC-8 5/8 74PDC-10 3/4 74PDC-12 1 74PDC-16 Dust caps are universal and can be used on either the coupler or nipple half. ISO-9001 Certified Part No. 74 C 8 8 F High Pressure Couplings 77 SERIES 77 Series — High Pressure Couplings Dry break flush valve minimizes fluid loss and air inclusion Rugged heavy duty construction with superior flow characteristics Designed for operating pressures up to 36,000 psi (2482 bar) Materials – high strength steel with Zinc Trivalent Chromate plating= or electroless nickel plating as well as 316 stainless steel Proven dog-lock mechanism provides safe, positive connection and eliminates ball brinelling Internal sleeve lock standard as safety feature Available in 1/4" size End fitting versatility due to two piece body construction Featuring…Snap-tite quality with superior pressure and flow characteristics over the competition. PRESSURE RATINGS STEEL 316 STAINLESS STEEL MAX. WORKING MIN. BURST MAX. WORKING MIN. BURST PSI BAR PSI BAR PSI BAR PSI BAR 1/4" .04 .04 36,000 2482 72,000 4965 20,000 1379 40,000 2759 AIR SIZE SPILLAGE INCLUSION (inches) (cc) (cc) 10 20 30 40 50 60 70 80 90 100 200 300 400 500 600 700 800 900 1000 2000 3000 .1 .2 .3 .4 .5 .6 .7 .8 .9 1.0 2 3 4 5 6 7 8 9 10 20 30 206.90 137.93 68.97 62.07 55.17 48.28 41.38 34.48 27.59 20.69 13.79 6.90 6.21 5.52 4.83 4.14 3.45 2.76 2.07 1.38 .69 .38 .76 1.14 1.51 1.90 2.27 2.65 3.03 3.41 3.80 7.57 11.36 15.14 18.93 22.71 26.50 30.28 34.07 37.85 75.70 13.55 CV=.32 FLOW RATE (LPM) FLOW RATE (GPM) HYDRAULIC FLUID PRESSURE LOSS (BAR) PRESSURE LOSS (PSI) PRESSURE DROP* *Test units equipped with female NPTF end fittings The 77 Series is designed for applications such as hydraulic test stands, hydrotesting and offshore drilling and production platforms where high pressure fluids and cleanliness is mandatory. =Conforms with ROHS and WEEE European Union Directives TECHNICAL AND DIMENSIONAL INFORMATION AVAILABLE END FITTINGS 9/16 MP SF562CX (21.59) .85 (22.35) .88 (19.05) .75 3/8 MP SF375CX (25.40) 1.00 3/8 MP SM375CX 9/16 MP SM562CX 1/4" RP (19.05) .75 1/4" NPTF (19.05) .75 1/4" SAE (16.76) .66 3/8" NPTF (21.59) .85 3/8" RP (21.59) .85 3/8" SAE (19.05) .75 (14.27) .56 (13.97) .55 (14.27) .56 (14.12) .56 1/4" MALE NPT 1/4" MALE SAE 3/8" MALE NPT 3/8" MALE SAE (17.53) .69 (11.43) .45 (16) .63 (28.45) 1.12 (19.81) .78 (12.70) .50 1/4 HP F250C 1/4 HP M250C 3/4 REVERSE CONE (AUTOCLAVE RH12) 9/16 HP M562C 1" REVERSE CONE (AUTOCLAVE RH16) 9/16 REVERSE CONE (AUTOCLAVE RH9) Pressures to 10,000 psi (689 bar) Pressures to 20,000 psi (1379 bar) Pressures to 36,000 psi (2482 bar)* *SST to 20,000 psi (1379 bar) (61.770.76) 2.43.03 (34.93)HEX 3/8" HEX (38.35 DIA) 1.51" DIA ACROSS CORNERS TYP (36.560.76) 1.44.03 DIA (44.150.76) 1.74.03 3.40 ENGAGED (86.33) CONNECTED END FITTING END FITTING COUPLER NIPPLE ! WARNING ! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND/OR PROPERTY DAMAGE. This document and other information from Snap-tite, Inc., its subsidiaries and authorized distributors, provides product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operation conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Snap-tite, Inc. and its subsidiaries at any time without notice. DISTRIBUTED BY: HOW TO ORDER PART NO. S 77 C 4 SF562CX -4F 1/4" Female NPTF -4EF 1/4" Female SAE -4RP 1/4" Female British Parallel BS2779 -4M 1/4" Male NPT -4EM 1/4" Male SAE -6F 3/8" Female NPTF -6EF 3/8" Female SAE -6RP 3/8" Female British Parallel BS2779 -6M 3/8" Male NPT -6EM 3/8" Male SAE SF562CX 9/16" Female Medium Pressure SF375CX 3/8" Female Medium Pressure SM562CX 9/16" Male Medium Pressure SM375CX 3/8" Male Medium Pressure M562C 9/16" High Pressure Male RH9 9/16" Reverse Cone RH12 3/4" Reverse Cone RH16 1" Reverse Cone F250C 1/4" Female High Pressure M250C 1/4" Male High Pressure 01-0006BE-0608 End Fitting Type* Pressures to 10,000 psi Pressures to 20,000 psi Pressures to 36,000 psi (689 bar) (1379 bar) (2482 bar)* *SST to 20,000 psi (1379 bar) *Other end fittings available upon request Quick Disconnect & Valve Division 201 Titusville Road Union City, Pennsylvania 16438-8699 USA PH: 814-438-3821 FAX: 814-438-3069 e-mail: qd&v_sales@snap-tite.com www.snap-tite.com Industrial Estate Whitemill - Wexford Republic of Ireland PH: 353 53 914 1566 FAX: 353 53 914 1582 e-mail: ste_sales@snap-tite.com www.snap-tite.com Material Body Type Series Coupling Half Coupling Size Seal Material Special Options No letter No letter 77 C 4 = 1/4" No letter EN Plated Steel Valved Series Coupler Buna N Electroless S P N V Nickel Plating 316 Stainless Unvalved Nipple Viton Steel (nipple only) ISO-9001 Certified THREAD TO CONNECT COUPLINGS 78 SERIES Featuring… Snap-tite quality with superior pressure and flow characteristics over the competition Snap-tite's heavy duty 78 Series Thread-to-Connect Couplings are designed for most industrial fluid applications plus they are ideal for hydraulic de-watering pumps, oil well equipment, hydraulic dump trucks and sand and salt spreaders requiring a rugged coupling.The 78 Series dry break features minimal spillage and air inclusion. The couplings connect under full operating pressure. For bulkhead mounting a steel flange is available. The 78 Series offers up to 3,000 psig (207 bar) operating pressure, in both connected and disconnected. • Interchangeable with Aeroquip 5100 Series and Parker 6100 Series • Heavy duty wing nut or hex nut for easy connection of threaded units • Dry-break design connects under full operating pressure of 3000 psi (207 bar) keeping spillage to a minimum • 4,500 psig (310 bar) proof pressure • Sizes 3/4" , 3/4" x 1/2", 1", 1-1/4" and 1-1/2" TECHNICAL AND DIMENSIONAL INFORMATION SIZE FLOW RATE (LPM) PRESSURE LOSS (PSI) PRESSURE LOSS (BAR) 01-0016BE-0410 ! WARNING ! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND/OR PROPERTY DAMAGE. This document and other information from Snap-tite, Inc., its subsidiaries and authorized distributors, provides product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operation conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Snap-tite, Inc. and its subsidiaries at any time without notice. Industrial Estate Whitemill - Wexford Republic of Ireland PH: 353 53 914 1566 FAX: 353 53 914 1582 e-mail: ste_sales@snap-tite.com www.snap-tite.com Quick Disconnect & Valve Division 201 Titusville Road Union City, Pennsylvania 16438-8699 USA PH: 814-438-3821 FAX: 814-438-3069 e-mail: qd&v_sales@snap-tite.com www.snap-tite.com 3/4" 3000 207 .30 .15 1" 3000 207 .40 .40 1-1/4" 2750 190 .65 .65 1-1/2" 2550 172 .80 .85 OPERATING PRESSURE*- BRASS AIR INCLUSION cc MAXIMUM SPILLAGE cc MAXIMUM PRESSURE RATINGS SIZE PSI BAR HOW TO ORDER PART NO. B 78 H C 12- 12 F End Fitting Type F Female NPTF RP Female British Parallel BS2779 WF With Flange *Nipple only Material No Letter for wing nut H Hex Nut *Coupler only Sleeve Configuration* B Brass Coupling Half End Fitting Size 12 = 3/4" 16 = 1" 20 = 1-1/4" 24 = 1-1/2" ACCESSORIES* ISO-9001 Certified A B C D D1 (HEX) E F G H1 H2 IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM 3/4" 5.02 127.51 1.66 42.26 2.93 74.42 4.10 104.14 1-3/4 44.45 1.44 36.58 1.25 31.75 3.11 79.00 2.13 54.10 .201 5.11 1" 5.45 138.43 1.38 35.05 3.44 87.38 4.50 114.30 2-1/8 53.98 1.74 44.20 1.57 39.88 3.24 82.30 2.38 60.45 .201 5.11 1-1/4" 6.28 159.51 1.78 45.21 3.92 99.57 5.23 132.84 2-1/2 63.50 2.08 52.83 1.89 48.00 3.73 94.74 2.63 66.80 .201 5.11 1-1/2" 6.54 166.12 1.63 46.40 4.09 103.89 5.25 133.35 2-3/4 69.85 2.45 62.23 2.18 55.37 4.13 104.90 3.25 82.55 .281 7.14 =Available in 1/2" Female NPTF only FLOW RATE (GPM) A C B F E D1D H1 H2 DIA. Size of Hex Nut G FLOW CHART 100 90 80 70 60 50 40 30 20 10 9 87 6 5 4 3 2 1.0 .9 .8 .7 .6 .5 .4 .3 .2 .1 1.0 2 3 4 5 6 7 8 9 10 20 30 40 50 60 70 80 90 100 200 300 3.80 7.6 11.4 15.1 18.9 22.7 26.5 30.3 34.0 37.9 75.70 113.6 151.4 189.3 227.0 265.0 303.0 340.7 378.5 757.0 1135.5 6.90 6.21 5.52 4.83 4.14 3.45 2.76 2.07 1.38 .69 .82 .55 .48 .41 .34 .27 .21 .14 .69 .62 .55 .048 .041 .034 .027 .021 .014 .007 FLOW RATE (LPM)* FLOW RATE (GPM)* PRESSURE LOSS (PSI) PRESSURE LOSS (BAR) 3/4" 1" 1-1/4" 1-1/2" Series 78 C Coupler N Nipple Coupling Size 8= = 1/2" 12 = 3/4" 16 = 1" 20 = 1-1/4" 24 = 1-1/2" Nipple Flange* 1/4" 78DC-12 78DP-12 78F-12 1" 78DC-16 78DP-16 78F-16 1-1/4" 78DC-20 78DP-20 78F-20 1-1/2" 78DC-24 78DP-24 78F-24 *All accessories are manufactured from carbon steel. 78 SERIES WITH WING NUT ASSEMBLY 78 SERIES WITH HEX NUT ASSEMBLY B78C Coupler B78NWF Nipple w/Flange B78HC Coupler B78N Nipple w/Flange Note: Nipples are two piece construction in 3/4" size SIZE PROTECTIVE PROTECTIVE MOUNTING CAP PLUG FLANGE *Pressure ratings for connected or disconnected modes. For excessive flow and surge conditions, consult factory before specifying. Optional Mounting Flange (steel) Many Standard Configurations Suitable for Hydraulic and Pneumatic Applications: Snap-tite H Series couplings have been proven by years of use on hydraulic and pneumatic applications. H Series is best suited for general purpose fluid applications where either single or double shut-off valving is desired. A wide range of sizes, materials and end configurations are available. PH version couplers and nipples are valved with a connect-under-pressure feature. These steel couplers and nipples allow connection with H Series valved couplers and nipples when there is residual pressure on the PH coupler/nipple side. IH version couplers are steel with a cylindrical valve designed specifically for pneumatic use. When paired with an unvalved/plain H Series nipple, it functions as a durable single-shut-off connection. H Series Features: • Sizes 1/4"-4" • Available in steel, brass, aluminum and 316 stainless steel • Seal material options available • Optional sleeve lock helps to prevent accidental disconnection • Double-shut-off version has low pressure drop • Manually operated sleeve provides secure connection Snap-tite H, IH & PH Series General Purpose Hydraulic and Pneumatic Quick Couplings Contact Information: Parker Hannifin Corporation Quick Coupling Division 8145 Lewis Road Minneapolis, MN 55427 phone 763 544 7781 fax 763 544 3418 qcd_sales@parker.com www.parker.com/quickcouplings H Series couplings are suitable for general purpose applications and a variety of media. They are very versatile in material, size and end configuration. Valve combinations include: - Double shut-off poppet valves - Single shut-off on the coupler or nipple side - Straight through (unvalved/plain) PH version couplers and nipples make it possible to overcome the high connection force caused by residual pressure. The poppet valves have an added pressure relief feature to allow connection under static pressures up 3000 psi (210 bar). With a PH Series coupler or nipple installed on the pressurized line you can easily connect with a mating valved H Series. Available in steel, sizes 3/8", 1/2", 3/4" and 1". IH version couplers have a cylindrical valve designed specifically for pneumatic systems and reciprocating, pulsating, rotary motion air tools. The IH valve provides 360° contact when connected with an unvalved/plain H Series nipple, enabling efficient operation and long life. Available in steel, sizes 1/4", 3/8", 1/2" and 3/4". Two -Piece Body Construction Postive Ball-Lock Design Ball Bearing Sleeve Lock Jet Stream Valve Design Hardened Sleeve Localized Induction Hardened Land Poppet Has Metal-to-Metal Stop Non-Shift Valve Wide Choice of End-Fittings O-Ring and Back-Up Technical and Dimensional Information Valved on both coupler and nipple (Double Shut-off) Unvalved/Plain on both coupler and nipple Valved on one half and Unvalved/Plain (Straight Through) on other half (Single Shut-off) Steel Aluminum Brass Stainless Steel Aluminum Brass Stainless Steel Steel psi bar psi bar psi bar psi bar psi bar psi bar psi bar psi bar 1/4" 6500 448 2250 155 2250 155 5000 345 11000 759 4000 276 4000 276 10000 690 3/8" 4500 310 2250 155 2250 155 4000 276 11000 759 4000 276 4000 276 8000 552 1/2" 4000 276 1750 121 2000 138 3750 259 11000 759 4000 276 4000 276 8000 552 3/4" 3500 241 1750 121 2000 138 2000 138 9000 621 3500 241 3500 241 7000 483 1" 2000 138 1500 103 1750 121 2000 138 6000 414 3000 207 3000 207 4000 276 1-1/4" 1750 121 375 26 350 24 1500 103 5000 345 1000 69 1000 69 3000 207 1-1/2" 1500 103 375 26 350 24 1500 103 5000 345 1000 69 1000 69 3000 207 2" 1500 103 300 21 400 28 500 34 4000 276 750 52 750 52 1000 69 2-1/2" 1000 69 300 21 400 28 400 28 1000 69 300 21 400 28 400 28 3" 750 52 200 14 200 14 400 28 750 52 200 14 200 14 400 28 4" 500 34 150 10 150 10 300 21 500 34 150 10 150 10 300 21 NOTE: Pressure ratings were established under static pressure conditions. Therefore, pressure ratings for any given flow, pressure surge and/or vibration may vary from these ratings. Burst pressures listed were taken at the point at which failure rendered the quick disconnect inoperative. (Proof pressure equals 1-1/2 times the working pressure; burst pressure equals 2 times working pressure.) Working Pressures Size H Series Poppet Valve IH Version Cylindrical Pneumatic Valve PH Version Connect Under Pressure Poppet Valve H Series IH Series PH Series .07 .21 .14 .41 .34 .27 .48 .69 .62 .55 1.38 4.83 4.14 3.45 2.76 2.07 6.90 6.21 5.52 13.79 300 20.69 200 100 90 80 70 60 50 40 30 20 10 9 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8 9 10 20 30 40 50 60 70 80 90 100 200 300 400 500 600 700 800 900 1000 3.79 7.57 11.36 15.14 18.93 22.71 26.50 30.28 34.07 37.85 75.70 113.60 151.40 189.30 265.00 302.80 340.70 378.50 757.00 1135.50 1892.50 2271.00 2649.50 3028.00 3406.50 3785.00 227.10 1514.00 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" Valved and Valved (Double Shut-off) FLOW RATE (LPM) PRESSURE LOSS (BAR) PRESSURE LOSS (PSI) FLOW RATE (GPM) (MiL-H-6083 OIL @ 90°F ± 5°F) 20.69 13.79 6.90 6.21 2.07 2.76 3.45 4.14 5.52 1.38 4.83 .69 .62 .55 .34 .27 .41 .48 .21 .14 .07 300 200 100 90 80 70 60 50 40 30 20 10 9 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8 9 10 20 30 40 50 60 70 80 90 100 200 300 400 500 600 700 800 900 3.79 7.57 11.36 15.14 18.93 22.71 26.50 30.28 34.07 37.85 75.70 113.60 151.40 189.30 227.10 265.00 302.80 340.70 378.50 757.00 1135.50 1892.50 2271.00 2649.50 3028.00 3406.50 1000 3785.00 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 1514.00 Valved and Plain (Single Shut-off) FLOW RATE (LPM) PRESSURE LOSS (BAR) PRESSURE LOSS (PSI) FLOW RATE (GPM) (MIL-H-6083 OIL @ 90°F ± 5°F) 30 20 10 9 8 7 6 5 4 3 2 1.0 .9 .8 .7 .6 .5 .4 .3 .2 .1 .2 .3 .4 .5 .6 .7 .8 .9 1.0 2 3 4 .1 5 6 7 8 9 10 20 1.31 2.61 3.92 5.23 6.54 7.84 9.15 10.46 11.76 13.07 26.14 78.43 65.36 52.29 39.22 117.64 104.58 91.50 130.71 261.43 2.07 1.38 .69 .62 .55 .48 .41 .34 .27 .21 .14 .07 .062 .055 .048 .041 .034 .027 .021 .014 .007 1/4" 3/8" 1/2" 3/4" CFM FREE AIR AT 17.7 PSIA, 70F PRESSURE LOSS (BAR) PRESSURE LOSS (PSI) MAXIMUM FLOW AT 85 PSI AIR FLOW RATE, LB. PER MIN. Flow Charts 20.69 13.79 6.90 6.21 2.07 2.76 3.45 4.14 5.52 1.38 4.83 .69 .62 .55 .34 .27 .41 .48 .21 .14 .07 300 200 100 90 80 70 60 50 40 30 20 10 9 87 6 5 4 3 2 1 1 2 3 4 5 6 7 89 10 20 30 40 50 60 70 80 90 100 200 300 3.79 7.57 11.36 15.14 18.93 22.71 26.50 30.28 34.07 37.85 75.70 113.60 151.40 189.30 227.10 265.00 302.80 340.70 378.50 757.00 1135.50 1" 3/4" 1/2" 3/8" Valved and Valved (Double Shut-off) FLOW RATE (LPM) PRESSURE LOSS (BAR) PRESSURE LOSS (PSI) FLOW RATE (GPM) (MiL-H-6083 OIL @ 90°F ± 5°F) Size 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2 2" 2-1/2" 3" 4" .75 .69 .95 .96 1.14 1.31 1.44 1.40 1.83 1.88 2.88 19.05 17.53 24.13 24.38 28.96 33.27 36.58 35.56 46.48 47.75 73.15 .88 1.00 1.19 1.50 1.88 2.00 2.50 3.38 4.00 4.75 6.00 22.35 25.40 30.23 38.10 47.75 50.80 63.50 88.90 101.60 120.65 152.40 .74 .74 .84 1.13 1.16 1.27 1.46 1.71 18.80 18.80 21.34 28.70 29.46 32.26 37.08 43.43 .88 1.00 1.19 1.50 1.88 2.00 2.50 3.38 22.35 33.27 30.23 38.10 47.75 50.80 63.50 88.90 1.23 1.31 1.47 1.84 1.84 1.95 31.31 33.27 37.34 46.74 46.74 49.53 .88 1.00 1.19 1.50 1.88 2.00 22.35 25.40 30.23 38.10 47.75 50.80 .31 .40 .47 .50 .60 1.26 .70 .78 .90 .88 1.13 7.87 10.16 11.94 12.70 15.24 32.00 17.78 19.81 22.86 22.35 28.70 .88 1.00 1.19 1.50 1.88 2.00 2.50 3.50 4.00 4.75 6.00 22.35 25.40 30.23 38.10 47.75 50.80 63.50 88.90 101.60 120.65 152.40 .46 .70 .57 1.00 .87 1.11 .85 1.01 11.68 17.78 14.48 25.40 22.10 28.19 21.59 25.65 . .88 1.00 1.19 1.50 1.88 2.00 2.50 3.50 22.35 25.40 30.23 38.10 47.75 50.80 63.50 88.90 1.39 1.56 1.67 2.03 1.84 2.14 35.30 39.62 42.42 51.56 46.74 54.36 .88 1.00 1.19 1.50 1.88 2.00 22.35 25.40 30.23 38.10 47.75 50.80 .39 .40 .53 .56 .60 1.26 .70 .78 .90 .88 1.13 9.91 10.16 13.46 14.22 15.24 32.00 17.78 19.81 22.86 22.35 28.70 .88 1.00 1.19 1.50 1.88 2.00 2.50 3.50 4.00 4.75 6.00 22.35 25.40 30.23 38.10 47.75 50.80 63.50 88.90 101.60 120.65 152.40 in mm F G*1 F G*1 F G*1 F G*1 F G*1 Male Tapered Pipe EM Male SAE Flared and MS33656 MS33657 Female Tapered Pipe EF Female Straight and MS33649 F G*1 EB Male SAE Bulk- Head Female RP4 British Parallel G*1 F F F F F F F F G G G G G G G F F F F F F F G G G G G G G F F F F F F F G G G G G G G F F F F F F F G G G G G G G F F F F F F F G G G G G G G F F F F F F F G G G G G G G F F F F F F F G G G G G G G Valved Coupler and Nipple End Fitting Dimensions in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm A B C D*2 H SEE END FITTING D (Hex) A B ENGAGEMENT LENGTH C H D (Hex) SEE END FITTING Size 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 1.34 1.50 1.62 1.92 2.07 2.28 2.57 3.14 3.63 3.88 4.58 34.04 38.10 41.15 48.77 52.58 57.91 65.28 79.76 92.20 98.55 116.33 1.00 1.19 1.39 1.63 2.00 2.19 2.75 3.50 4.50 5.45 6.75 25.40 30.23 35.31 41.40 50.80 55.63 69.85 88.90 114.30 138.13 171.45 1.28 1.44 1.51 1.79 1.95 2.15 2.41 2.94 3.42 3.79 4.47 32.51 36.58 38.35 45.47 49.53 54.61 61.21 74.68 86.87 96.27 113.54 .88 1.00 1.19 1.50 1.88 2.00 2.75 3.75 4.50 4.75 6.75 22.35 25.40 30.23 38.10 47.75 50.80 69.85 95.25 114.30 120.65 171.45 .58 .71 .72 .88 .91 .90 1.06 1.32 1.41 1.56 1.93 14.73 18.03 18.29 22.35 23.11 22.86 26.92 33.53 35.81 39.62 49.02 in mm Valved Coupler and Nipple Dimensions (without end fitting) in mm in mm in mm in mm Size 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 1.34 1.50 1.62 1.91 2.07 2.28 2.57 2.48 3.11 3.35 3.88 34.04 38.10 41.15 48.51 52.58 57.91 65.28 62.99 78.99 85.09 98.55 1.00 1.19 1.39 1.63 2.00 2.19 2.75 3.50 4.50 5.45 6.75 25.40 30.23 35.31 41.40 50.80 55.63 69.85 88.90 114.30 138.43 171.45 1.32 1.52 1.72 1.92 2.10 2.22 2.44 2.60 2.95 3.40 3.73 33.53 38.61 43.69 48.77 53.34 56.39 61.98 66.04 74.93 86.36 94.74 .88 1.00 1.19 1.50 1.88 2.00 2.50 3.25 3.75 4.75 5.50 22.35 25.40 30.23 38.10 47.75 50.80 63.50 82.55 95.25 120.65 139.70 .63 .81 1.00 1.19 1.50 1.88 2.13 2.75 3.25 4.00 5.00 16.00 20.57 25.40 30.23 38.10 47.75 54.10 69.85 82.55 101.60 127.00 .58 .71 .72 .88 .91 .90 1.06 1.32 1.41 1.56 1.93 14.73 18.03 18.29 22.35 23.11 22.86 26.92 33.53 35.81 39.62 49.02 .78 .98 1.01 1.14 1.16 1.17 1.34 2.03 2.08 2.59 2.58 19.81 24.89 25.65 28.96 29.46 29.72 34.04 51.56 52.83 65.79 65.53 .56 .69 .88 1.06 1.38 1.88 2.13 2.50 3.25 4.00 5.00 14.22 17.53 22.35 26.92 35.05 47.75 54.10 63.50 82.55 101.60 127.00 1.27 1.44 1.72 1.86 2.13 2.22 2.44 2.60 2.95 3.40 3.73 32.26 36.58 43.69 47.24 54.10 56.39 61.98 66.04 74.93 86.36 94.74 A B C E*1,2 H Dust caps, dust plugs and pressure caps protect disconnected couplers and nipples from damage, dirt and other contaminants. Dust caps and dust plugs are available in plastic and clear anodized aluminum. Plastic Cap and Plug Designed with a loop to fit over fitting or affixing to equipment with a sheet metal screw. Available in sizes 1/4" thru 1". Aluminum Dust Caps and Plugs Aluminum dust caps and plugs are available in sizes 1/4" thru 3". The 1/4" thru 3/4" sizes come with 10" chrome plated brass bead chain. The 1" and above come with steel zinc plated sash chain. Pressure Caps Pressure-tight pressure caps for nipples are standard in steel, Trivalent plated. Other materials such as brass, aluminum and stainless steel available on special order. Sizes available 1/4" thru 3". Sizes 1/4" thru 3/4" come with 10" length of corrosion resistant steel cable. Sizes 1" thru 3" come with 12" of cable-all with adjustable loop at end of cable. Consult QCD for special lengths. Metal Pressure Cap MCH Metal Dust Plug AMPH Metal Dust Cap ADCH Plastic Dust Cap PDC K L J*1 *1 Dimensions taken across the hex flats. Round stock with two milled flats may be substituted for hex stock. Dimensions across flats same as dimensions across hex flats. Max O.D. of round stock will not exceed the dimensions across the points of the hex stock. Valve coupler and nipple bodies may be supplied from round bar stock without wrench flats. *2 Notch on hex indicates RP British parallel threads. H J K D (Hex) A B H E (Hex) C E (Hex) A B H E (Hex) L H J K D (Hex) A B H E (Hex) C E (Hex) A B H E (Hex) L H J D (Hex) A B H E (Hex) C E (Hex) A B H E (Hex) L D (Hex) H E (Hex) C E (Hex) A B H E (Hex) L E (Hex) A B H E (Hex) L NOTES: D*1 in mm in mm in mm in mm in mm in mm in mm in mm in mm Female Pipe Thread Female RP British Parallel Thread Male Pipe Thread Accessories Sizes Plastic Cap Plastic Plug Aluminum Plug Aluminum Cap Pressure Cap 1/4" PDC-4 PDP-4 AMPH-4 ADCH-4 MCH-4 3/8" PDC-6 PDP-6 AMPH-6 ADCH-6 MCH-6 1/2" PDC-8 PDP-8 AMPH-8 ADCH-8 MCH-8 3/4" PDC-12 PDP-12 AMPH-12 ADCH-12 MCH-12 1" PDC-16 PDP-16 AMPH-16 ADCH-16 MCH-16 1-1/4" AMPH-20 ADCH-20 MCH-20 1-1/2" AMPH-24 ADCH-24 MCH-24 2" AMPH-32 ADCH-32 MCH-32 2-1/2" AMPH-40 ADCH-40 MCH-40 3" AMPH-48 ADCH-48 MCH-48 Unvalved/Plain Coupler and Nipple End Configurations Plastic Dust Plug PDP S V H C 4 - 4 F Material: Blank = Steel, clear trivalent plating A = Aluminum, clear anodized B = Brass S = 316 Stainless Steel Series: H = Poppet valve or plain/unvalved PH1 = Poppet valve with pressure relief feature IH2 = Pneumatic cylindrical valve Coupling Half: C = Coupler N = Nipple End Fitting Type: M = Male NPT F = Female NPTF3 EF = Female SAE EM = Male SAE 37° Flare EB = Bulkhead SAE RP = Female British Parallel BS2779 Seals: Blank = Nitrile (Code A) JF = Military variation of Nitrile for hydrocarbon fuels M = Military variation of Nitrile for MIL-H-5606 fluids V = Fluorocarbon E = Ethylene Propylene Sleeve Lock Option: SL = Helps to prevent accidental disconnection Ordering Information Type: V = Valved P = Plain (without valve) F F F F F F F G G G G G G G 1 PH Valve option recommended on one side, not both. Available in steel only. 2 IH available in steel only. 3 For sizes up to 1" NPTF threads in steel. For sizes up to 1" NPSF threads in stainless steel. For sizes over 1' NPT threads. 49 = MS33649 Female 56 = MS33656 37° Male Flare 57 = MS33657 Bulkhead 14 = MS33514 Male 15 = MS33515 Bulkhead End Fitting Size: 2 = 1/8" 4 = 1/4" 6 = 3/8" 8 = 1/2" 12 = 3/4" 16 = 1" 20 = 1-1/4" 24 = 1-1/2" 32 = 2" 40 = 2-1/2" 48 = 3" 64 = 4" Coupling Body Size: 4 = 1/4" 6 = 3/8" 8 = 1/2" 12 = 3/4" 16 = 1" 20 = 1-1/4" 24 = 1-1/2" 32 = 2" 40 = 2-1/2" 48 = 3" 64 = 4" H PH IH Double Shut-Off Valved Coupler • • Valved Nipple Single Shut-Off Valved Coupler • • Unvalved/Plain Nipple Straight Through Unvalved/Plain Coupler • Unvalved/Plain Nipple Note: Not all configurations are standard product offering. Contact QCD for price and delivery. O-ring and backup *"A" required for Nitrile Seal Kits. Refer to the part number code for other seal options. Replacement Parts Valve Kits Includes valve, valve spring and stop. Valve seal is included in sizes 3/8" thru 1" in steel, brass and aluminum only. Part Number – Use the base part number followed by SPK. Example: VHC4-SPK VIHC6-SPK Valve Seals 1/4" valve seal is staked in the coupler and nipple bodies in all materials and is not considered field repairable. 3/8" and above are available for repair. Part Number – "H (size)-55 (seal material)" Example: H6-55A* H8-55A* Coupler Interface Seals Includes O-ring and back-up ring. Part Number "H (size)-56-9 (seal material)". Example: H6-56-9A* H Series PH Series IH Series Hydraulic Coupler/Nipple Hydraulic Coupler/Nipple Pneumatic Coupler Valve • Poppet Valve • Connect-Under-Pressure • Cylindrical Valve Styles: • Unvalved/Plain Poppet Valve Connection • Double Shut-off • Double Shut-off • Single Shut-off (connects Types: • Single Shut-off (connects with valved with unvalved/plain • Straight Through/Unvalved H Series Coupler or Nipple) H Series Nipple) Body Sizes: 1/4" - 4" 3/8" - 1" 1/4" - 3/4" Materials: • Steel • Steel • Steel • 316 Stainless Steel • Aluminum • Brass Standard Configurations for General Purpose Hydraulic and Pneumatic Applications Current Design Previous design was U-Packer. Consult QCD for availability. © 2013 Parker Hannifin Corporation Bulletin 3800-STH /USA 5000 5/13 QCD KP General Purpose & Vacuum Couplings EA&E SERIES Featuring...Snap-tite quality with superior pressure and flow characteristics over the competition. EA, E Series - General Purpose &Vacuum Couplings Sizes — EA Series: 1/4", 3/8", 1/2", 3/4" E Series: 1", 1-1/4", 1-1/2", 2", 3", 4" Metals — EA and E Series are available in four metals – Zinc Trivalent Chromate Plated steel=, brass, aluminum and 316 stainless steel. Please consult factory. A variety of protective finishes are available. Please consult factory. Seal Versatility — Wide range of standard and special seal materials available. High Temperature Capability in EA Series — A unique configuration for containing the nipple o-ring seal to affect both a diametrical and compression seal allows the EA Series to handle high temperature and vacuum internally even with an external pressure on the coupling - or the reverse - while maintaining reliability. Smooth Flow — Snap-tite's "Jet Stream" valve design helps maintain a clean linear flow. Positive positioning of the valve aids in maintaining a steady, even flow under normal working conditions. Vacuum Capability — Dependable service down to 29.72"Hg. Dependable Operation — Ball-lock mechanism provides positive connection while two piece construction allows for end fitting versatility. Sleeve Lock — Sleeve lock option aids in preventing accidental disconnection of the coupling. 2 Snap-tite's EA Series quick disconnect coupling is designed specifically for vacuum and medium pressure service, providing a dependable means for speeding fluid line changeover in autoclave applications ranging from aircraft fabrication to plastic molding. Snap-tite's E Series quick disconnect couplings have been proven by years of use on hydraulic and pneumatic applications as well as many other liquids and gases. They are designed and manufactured for years of reliable service. =Conforms with ROHS and WEEE European Union Directives 3 EA SERIES – 1/4" – 3/4" E SERIES – 1" – 4" PRESSURE RATINGS* Valved & Valved, Valved & Plain and Plain & Plain Couplings 1/4" 3,000 207 6,000 414 3,000 207 6,000 414 1,500 103 3,000 207 1,500 103 3,000 207 3/8" 3,000 207 6,000 414 3,000 207 6,000 414 1,500 103 3,000 207 1,500 103 3,000 207 1/2" 3,000 207 6,000 414 3,000 207 6,000 414 1,500 103 3,000 207 1,500 103 3,000 207 3/4" 2,000 138 4,000 276 2,000 138 4,000 276 1,500 103 3,000 207 1,500 103 3,000 207 1" 1,500 103 3,000 207 1,000 69 2,000 138 500 34 1,000 69 500 34 1,000 69 1-1/4" 1,000 69 2,000 138 750 52 1,500 103 300 21 600 41 300 21 600 41 1-1/2" 1,000 69 2,000 138 750 52 1,500 103 300 21 600 41 300 21 600 41 2" 750 52 1,500 103 500 34 1,000 69 300 21 600 41 300 21 600 41 2-1/2" 500 34 1,000 69 400 28 800 55 300 21 600 41 300 21 600 41 3" 500 34 1,000 69 300 21 600 41 200 14 400 28 200 14 400 28 4" 500 34 1,000 69 200 14 400 28 150 10 300 21 150 10 300 21 STEEL STAINLESS STEEL BRASS ALUMINUM SIZE PSI BAR PSI BAR PSI BAR PSI BAR PSI BAR PSI BAR PSI BAR PSI BAR Maximum Mimimum Maximum Minimum Maximum Minimum Maximum Minimum Working Burst Working Burst Working Burst Working Burst VACUUM CAPABILITY AT STANDARD BAROMETRIC CONDITIONS EA SERIES E SERIES 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" IN.HG ATM IN.HG ATM IN.HG ATM IN.HG ATM IN.HG ATM IN.HG ATM IN.HG ATM IN.HG ATM CONNECTED 29.7 .99 29.7 .99 29.7 .99 29.7 .99 29.7 .99 28.0 .94 27.0 .90 26.0 .87 COUPLER OR NIPPLE ALONE 29.7 .99 29.7 .99 29.7 .99 29.7 .99 20.5 .69 12.0 .40 4.2 .14 4.5 .15 (DISCONNECTED) *Note: Pressure ratings were established under static pressure conditions. Therefore, pressure ratings for any given flow, pressure surge, and/or vibration may vary from those ratings. FLOW CHARTS EA Series Valved & Valved (Double Shut-Off) 4 3.79 7.57 11.36 15.14 18.93 22.71 26.50 30.28 34.07 37.85 75.70 113.60 151.40 189.30 227.10 265.00 302.80 340.70 378.50 300 200 100 90 80 70 60 50 40 30 20 10 9 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8 9 10 20 30 40 50 60 70 80 90 100 20.69 13.79 6.90 6.21 5.52 4.83 4.14 3.45 2.76 2.07 1.38 .69 .62 .55 .48 .41 .34 .27 .21 .14 .07 1/4" 3/8" 1/2" 3/4" Pressure Loss (Bar) Pressure Loss (psi) Flow Rate (GPM) 88 ssu (18cSt) oil Flow Rate (LPM) 3.79 7.57 11.36 15.14 18.93 22.71 26.50 30.28 34.07 37.85 75.70 113.60 151.40 189.30 227.10 265.00 302.80 340.70 378.50 300 200 100 90 80 70 60 50 40 30 20 10 9 8 7 6 5 4 3 2 1 1 2 3 4 5 6 78 9 10 20 30 40 50 60 70 80 90 100 20.69 13.79 6.90 6.21 5.52 4.83 4.14 3.45 2.76 2.07 1.38 .69 .62 .55 .48 .41 .34 .27 .21 .14 .07 1/4" 3/8" 1/2" 3/4" Pressure Loss (Bar) Pressure Loss (psi) Flow Rate (GPM) 88 ssu (18cSt) oil Flow Rate (LPM) EA Series Valved & Plain (Single Shut-Off) E Series Valved & Valved (Double Shut-Off) E Series Valved & Plain (Single Shut-Off) 37.85 75.70 113.60 151.40 189.30 227.10 265.00 302.80 340.70 378.50 757.00 1135.50 1514.00 1892.50 2271.00 2649.50 3028.00 3406.50 3785.00 300 200 100 90 80 70 60 50 40 30 20 10 9 8 7 6 5 4 3 2 1 10 20 30 40 50 60 70 80 90 100 200 300 400 500 600 700 800 900 1000 20.69 13.79 6.90 6.21 5.52 4.83 4.14 3.45 2.76 2.07 1.38 .69 .62 .55 .48 .41 .34 .27 .21 .14 .07 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" Pressure Loss (Bar) Pressure Loss (psi) Flow Rate (GPM) 88 ssu (18cSt) oil Flow Rate (LPM) 37.85 75.70 113.60 151.40 189.30 227.10 265.00 302.80 340.70 378.50 757.00 1135.50 1514.00 1892.50 2271.00 2649.50 3028.00 3406.50 3785.00 300 200 100 90 80 70 60 50 40 30 20 10 9 8 7 6 5 4 3 2 1 10 20 30 40 50 60 70 80 90 100 200 300 400 500 600 700 800 900 1000 20.69 13.79 6.90 6.21 5.52 4.83 4.14 3.45 2.76 2.07 1.38 .69 .62 .55 .48 .41 .34 .27 .21 .14 .07 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" Pressure Loss (Bar) Pressure Loss (psi) Flow Rate (GPM) 88 ssu (18cSt) oil Flow Rate (LPM) F F F F F F F G2 G2 G2 G2 G2 G2 G2 F F F F F F F G2 G2 G2 G2 G2 VALVED 1. Double shut-off coupling: Valve coupler and valve nipple 2. Single shut-off coupling: Valve coupler and plain nipple 3. No shut-off or straight through: Plain coupler and plain nipple. Plain couplers cannot be used with valve nipples. All combinations of the same coupling size are interchangeable regardless of material, finish or end fittings. in mm in mm in mm in mm in mm A B C D R COUPLING COMBINATIONS & END FITTINGS 5 END FITTINGS1 Size 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" .75 .69 .95 .96 1.14 1.31 1.44 1.40 1.83 1.88 2.88 19.05 17.53 24.13 24.38 28.96 33.27 36.58 35.56 46.48 47.75 73.15 .88 1.00 1.19 1.50 1.88 2.00 2.50 3.503 4.00 4.75 6.00 22.35 25.40 30.23 38.10 47.75 50.80 63.50 88.903 101.60 120.65 152.40 .74 .74 .84 1.13 1.16 1.27 1.46 1.71 18.80 18.80 21.34 28.70 29.46 32.26 37.08 43.43 .88 1.00 1.19 1.50 1.88 2.00 2.50 3.503 22.35 33.27 30.23 38.10 47.75 50.80 63.50 88.903 1.23 1.31 1.47 1.84 1.84 1.95 31.31 33.27 37.34 46.74 46.74 49.53 .88 1.00 1.19 1.50 1.88 2.00 22.35 25.40 30.23 38.10 47.75 50.80 .31 .40 .47 .50 .60 1.26 .70 .78 .90 .88 1.13 7.87 10.16 11.94 12.70 15.24 32.00 17.78 19.81 22.86 22.35 28.70 .88 1.00 1.19 1.50 1.88 2.00 2.50 3.50 4.00 4.75 6.00 22.35 25.40 30.23 38.10 47.75 50.80 63.50 88.90 101.60 120.65 152.40 .46 .70 .57 1.00 .87 1.11 .85 1.01 11.68 17.78 14.48 25.40 22.10 28.19 21.59 25.65 . .88 1.00 1.19 1.50 1.88 2.00 2.50 3.50 22.35 25.40 30.23 38.10 47.75 50.80 63.50 88.90 1.39 1.56 1.67 2.03 1.84 2.14 35.30 39.62 42.42 51.56 46.74 54.36 .88 1.00 1.19 1.50 1.88 2.00 22.35 25.40 30.23 38.10 47.75 50.80 .39 .40 .53 .56 .60 1.26 .70 .78 .90 .89 1.13 9.91 10.16 13.46 14.22 15.24 32.00 17.78 19.81 22.86 22.35 28.70 .88 1.00 1.19 1.50 1.88 2.00 2.50 3.50 4.00 4.75 6.00 22.35 25.40 30.23 38.10 47.75 50.80 63.50 88.90 101.60 120.65 152.40 in mm F G2 in mm in mm in mm in mm F G2 in mm in mm in mm in mm F G2 F G2 in mm F G2 F F F F F F F G2 G2 G2 G2 G2 G2 G2 F F F F F F F G2 G2 G2 G2 G2 G2 G2 F F F F F F F G2 G2 G2 G2 G2 G2 G2 F F F F F F F G2 G2 G2 G2 G2 G2 G2 F F F F F F F G2 G2 G2 G2 G2 G2 G2 Male Tapered Pipe EM Male SAE Flared and MS33656 MS33657 Female Tapered Pipe EF Female Straight and MS33649 F G2 EB Male SAE Bulk- Head Female RP4 British Parallel G2 in mm in mm F in mm in mm A B DIA D(HEX)2 C ENGAGEMENT R LENGTH D(HEX)2 SEE END FITTINGS SEE END FITTINGS Size 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 1.34 1.50 1.62 1.91 2.07 2.28 2.57 3.14 3.63 3.88 4.58 34.04 38.10 41.15 48.51 52.58 57.91 65.28 79.76 92.20 98.55 116.30 1.13 1.31 1.44 1.88 2.19 2.50 2.88 3.63 4.50 5.45 6.75 28.70 33.27 36.58 47.80 55.63 63.50 73.15 92.20 114.30 138.40 171.50 1.30 1.46 1.51 1.79 1.89 2.02 2.25 2.72 3.20 3.58 4.24 33.02 37.08 38.35 45.47 48.01 51.31 57.15 69.09 81.28 90.90 107.70 .88 1.00 1.19 1.50 1.88 2.00 2.75 3.75 4.50 5.25 6.75 22.40 25.40 30.23 38.10 47.75 50.80 69.85 95.25 114.30 133.40 171.45 .55 .69 .69 .84 .86 .80 .94 1.12 1.23 1.38 1.73 14.00 17.53 17.53 21.30 21.84 20.30 23.88 28.44 31.24 35.00 44.00 PLAIN MALE PIPE in mm in mm in mm in mm in mm E F G H J K in mm PLAIN FEMALE PIPE & PLAIN FEMALE RP in mm in mm L R 1 Other special end fittings available upon request. 2 Dimensions taken across the hex flats. Round stock with two milled flats may be substituted for hex stock. Dimensions across flats same as dimensions across hex flats. Max O.D. of round stock will not exceed the dimensions across the points of the hex stock. Valve coupler and nipple bodies may be supplied from round bar stock without wrench flats. 3 3.5" (88.9 mm) across hex flats - may substitute 3.75" (95.25 mm) round with 3.38" (85.85 mm) across wrench flats. 4 Notch on Hex indicates RP British parallel threads. 6 With 10 psi Internal With 50 psi Internal Internal Pressure Force to Connect Pressure Pressure Series Size psig (bar) lbs. (kg) (cc or ml) (cc or ml) EA 1/4" 200 (15) 50 (22.7) 1.2 1.5 EA 3/8" 200 (15) 60 (27.2) 1.4 2.5 EA 1/2" 200 (15) 95 (43.1) 4.2 4.6 EA 3/4" 100 (10) 95 (43.1) 10.5 11.6 E 1" 100 (10) 145 (65.8) 19.6 21.4 E 1-1/4" 100 (10) 190 (86.2) 30.8 38.6 E 1-1/2" 50 (5) 150 (68.0) 55.2 59.3 E 2" 50 (5) 245 (111.2) 85.3 96.5 E 2-1/2" 50 (5) 425 (192.8) 172.0 251.0 E 3" 50 (5) 560 (254.0) 262.0 286.0 E 4" 2 (0) 45 (20.4) FORCE TO CONNECT SPILLAGE ON DISCONNECT Valved & Valved Valved & Valved G H DIA K(HEX)2 J ENGAGEMENT R LENGTH L(HEX)2 F(HEX)2 ENGAGEMENT R LENGTH E K(HEX)2 ENGAGEMENT R LENGTH L(HEX)2 F(HEX)2 ENGAGEMENT R LENGTH E Size 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" .87 .91 .88 1.05 1.02 .98 1.19 1.40 1.85 2.37 2.29 22.10 23.10 22.40 26.70 25.91 24.90 30.20 35.56 46.99 60.20 58.20 .56 .69 .88 1.06 1.38 1.88 2.13 2.50 3.25 4.00 5.00 14.20 17.53 22.40 26.90 35.05 47.80 54.10 63.50 82.55 101.60 127.00 1.34 1.53 1.72 1.91 2.07 2.28 2.57 2.67 3.21 3.35 3.88 34.04 38.86 43.69 48.50 52.60 57.90 65.30 67.82 81.50 85.10 98.60 1.13 1.31 1.44 1.88 2.19 2.50 2.88 3.63 4.50 5.45 6.75 28.70 33.27 36.58 47.70 55.63 63.50 73.15 92.20 114.30 138.40 171.50 1.33 1.58 1.70 2.05 2.04 2.12 2.23 2.35 2.88 3.19 3.50 33.78 40.13 43.18 52.07 51.82 53.85 56.64 59.69 73.20 81.03 88.90 .88 1.00 1.19 1.50 1.88 2.00 2.50 3.25 3.75 4.75 5.50 22.40 25.40 30.23 38.10 47.80 50.80 63.50 82.60 95.30 120.70 139.70 .63 .81 1.00 1.19 1.50 1.88 2.13 2.75 3.25 4.00 5.00 16.00 20.60 25.40 30.20 38.10 47.80 54.10 69.85 82.60 101.60 127.00 .55 .69 .69 .84 .86 .80 .94 1.12 1.23 1.38 1.73 14.00 17.53 17.53 21.30 21.84 20.30 23.88 28.44 31.24 35.00 44.00 SIZES PLASTIC PLUG PLASTIC CAP ALUMINUM PLUG ALUMINUM CAP PRESSURE CAP 1/4" PDP-4 PDC-4 AMPE-4 ADCE-4 MCE-4 3/8" PDP-6 PDC-6 AMPE-6 ADCE-6 MCE-6 1/2" PDP-8 PDC-8 AMPE-8 ADCE-8 MCE-8 3/4" PDP-12 PDC-12 AMPE-12 ADCE-12 MCE-12 1" PDP-16 PDC-16 AMPE-16 ADCE-16 MCE-16 1-1/4" AMPE-20 ADCE-20 MCE-20 1-1/2" AMPE-24 ADCE-24 MCE-24 2" AMPE-32 ADCE-32 MCE-32 2-1/2" AMPE-40 ADCE-40 MCE-40 3" AMPE-48 ADCE-48 MCE-48 Dust caps, dust plugs and pressure caps protect disconnected coupler and nipple from damage, dirt and other contaminants. Dust caps and dust plugs are available in plastic and clear anodized aluminum. Plastic Caps and Plugs Inexpensive means to protect your investment against contamination and damage. Comes with a loop to fit over pipe fitting or affixing to equipment with sheet metal screw. Available in sizes 1/4" thru 1". Aluminum Dust Caps and Plugs Alternate method to protect your equipment – aluminum dust caps and plugs are available in sizes 1/4" thru 3". The 1/4" thru 3/4" sizes come with 10" chrome plated brass bead chain. The 1" and above come with steel zinc plated sash chain. Pressure Caps Pressure-tight pressure caps for nipples are standard in steel, zinc yellow dichromate plated. Other materials such as brass, aluminum and stainless steel available on special order. Sizes available 1/4" thru 3". Sizes 1/4" thru 3/4" come with 10" length of corrosion resistant steel cable. Sizes 1" thru 3" come with 12" of cable-all with adjustable loop at end of cable. Consult factory for special lengths and part number. Metal Pressure Cap MCE Metal Dust Plug AMPE Metal Dust Cap ADCE Plastic Dust Cap PDC Plastic Dust Plug PDP ACCESSORIES SPARE PARTS Snap-tite Quick Disconnect Couplings are designed for long, trouble-free life. Upon occasion, certain parts may get damaged and need to be ordered. Valve Kits (Includes valve, valve spring and stop. Valve seal is included in sizes 3/8" thru 1" in steel, brass and aluminum only). Part Number – Use the base part number followed by SPK Example: VEAC4-SPK BVEC16-SPK Valve Seals (1/4" valve seal is staked in the coupler and nipple bodies in all materials and is not considered field repairable. 3/8" and above are available for repair). Part Number – (EA or E) (size)-55" Example: EA8-55 E16-55V Nipple Seals (O-ring for EA Series, butt seal for E Series). Part Number – (EA or E) (size)-58" Example: EA6-58 E16-58 For other available spare parts, consult factory. 7 DISTRIBUTED BY: ! WARNING ! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Snap-tite, Inc., its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operation conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Snap-tite, Inc. and its subsidiaries at any time without notice. 01-0038BE-1203 Quick Disconnect & Valve Division 201 Titusville Road Union City, Pennsylvania 16438-8699 USA PH: 814-438-3821 FAX: 814-438-3069 e-mail: qd&v_sales@snap-tite.com www.snap-tite.com Industrial Estate Whitemill - Wexford Republic of Ireland PH: 353 53 914 1566 FAX: 353 53 914 1582 e-mail: ste_sales@snap-tite.com www.snap-tite.com 8 HOW TO ORDER Material Body Series Coupling Coupling End Fitting End Fitting Seal Sleeve Type Half Size Size Type Material Lock OPTIONS No letter V EA C 4 = 1/4˝ 2 = 1/8˝ (see page 5) No letter for SL Steel, plated Valve (1/4"- Coupler 6 = 3/8˝ 4 = 1/4˝ M Buna N Aids in A P 3/4") N 8 = 1/2˝ 6 = 3/8˝ Male NPT (Code A) preventing Aluminum Plain E Nipple 12 = 3/4˝ 8 = 1/2˝ F 40° to 200°F accidental clear (without (1" - 16 = 1˝ 10 = 5/8˝ Female NPTF1 -40° to 93°C disconnection. anodized valve) 4") 20 = 1-1/4˝ 12 = 3/4˝ EF JF To disconnect, B 24 = 1-1/2˝ 16 = 1˝ Female SAE Military align the pin Brass 32 = 2˝ 20 = 1-1/4˝ EM variation of in the body S 40 = 2-1/2˝ 24 = 1-1/2˝ Male SAE Buna N for with the slot Stainless 48 = 3˝ 32 = 2˝ 37° Flare hydrocarbon in the sleeve. Steel 316 64 = 4˝ 40 = 2-1/2˝ EB fuels 48 = 3˝ Bulkhead SAE -65° to 160°F 64 = 4˝ RP -54° to 71°C Female British M Parallel BS2779 Military -49 variation of MS33649 Buna N for Female MIL-H-5606 -56 fluids MS33656 -65° to 275°F 37° Male Flare -54° to 135°C -57 V MS33657 Viton® Bulkhead (DuPont) -14 -20° to 375°F MS33514 -29° to 190°C Male E -15 Ethylene pro- MS33515 pylene rubber Bulkhead -65° to 300°F -54° to 149°C AS Aflas 25° to 450°F -4° to 232° C 1 For sizes up to 1" NPTF threads in steel. For sizes up to 1" NPSF threads in stainless steel. For sizes over 1" NPT threads. Part No. S V EA C 4-4 F ISO-9001 Certified For Natural & Propane Gas GF SERIES GF Series — For Natural & Propane Gas Safety – Valve on coupler half will automatically shut off gas flow instantly when coupling is disconnected and automatically open on connection. Snap-tite's GF Series incorporates a safety fuse in the nipple to automatically shut off the gas supply to your gas appliance once temperatures exceed 350°F (177°C). Size – Available in sizes 1/4" through 1-1/4". Construction – GF series couplings are of brass construction. Certified – Snap-tite GF Series is certified by the Canadian Standards Association to meet ANSI Z21.41-1998 and CSA 6.9-M98 standards. This certification is for use with natural, manufactured and mixed gas, liquified petroleum and LP gas mixtures. Dust caps and plugs – Plastic dust caps for nipples and dust plugs for couplers are available to keep out dirt and grease when couplings are not in use. 01-0002BE-1203 Snap-tite fusible link protects against unwanted gas-fed fires. Disconnected: Valve in coupler shuts gas off (QD valve should not be the only means to shut gas supply off over an extended period of time. A gas shut-off valve should be installed before the coupler for extended periods). Connected: Valve opens allowing free flow of gas. Valve automatically closes when temperature exceeds 350°F (177°C), thus preventing a gas-supported fire. Quick Disconnect & Valve Division 201 Titusville Road Union City, Pennsylvania 16438-8699 USA PH: 814-438-3821 FAX: 814-438-3069 e-mail: qd&v_sales@snap-tite.com www.snap-tite.com Industrial Estate Whitemill - Wexford Republic of Ireland PH: 353 53 914 1566 FAX: 353 53 914 1582 e-mail: ste_sales@snap-tite.com www.snap-tite.com ! WARNING ! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Snap-tite, Inc., its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operation conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Snap-tite, Inc. and its subsidiaries at any time without notice. How to Order To order, simply give the part number noted below for the size of gas line you will be connecting to. Gas units are sold as sets consisting of a valve coupler and a plain nipple with fusible link. Size Coupler Nipple 1/4" BVGFC4-4F BPGFN4-4F 3/8" BVGFC6-6F BPGFN6-6F 1/2" BVGFC8-8F BPGFN8-8F 3/4" BVGFC12-12F BPGFN12-12F 1" BVGFC16-16F BPGFN16-16F 1-1/4" BVGFC20-20F BPGFN20-20F Size Coupler Plug Nipple Cap 1/4" PDP-4 PDC-4 3/8" PDP-6 PDC-6 1/2" PDP-8 PDC-8 3/4" PDP-12 PDC-12 1" N/A N/A 1-1/4" N/A N/A ISO-9001 Certified CHEMICAL COUPLINGS 25 SERIES Featuring… Snap-tite quality with superior pressure and flow characteristics over the competition 25 Series quick disconnects are ideally suited for systems that must come in contact with families of fluids that have widely varying chemical characteristics. Liquids such as aromatic hydrocarbons, alcohols, esters, ketones, ethers, strong caustics, sulfuric acid and hydroflouric acid as well as many other highly corrosive materials pose no problem for the 25 Series. They may also be used with cryogenic liquids under certain conditions when Kel F seals are specified. This design utilizes a barrel-type valve construction with a seal mounted in the valve to assure equalized valve-seat sealing. A unique lip seal provides a highly reliable seal in the connected position and acts as a wiper when disconnecting. • 316 stainless steel construction • Dependable operation • PTFE or Kel F seal available • Sizes 1/4", 1/2" x 3/8" and 1/2" • Safety sleeve lock available • Tubular valve design • Operating pressures to 1000 psi (70 bar) SIZE 01-0019BE-0412 Quick Disconnect & Valve Division 201 Titusville Road Union City, Pennsylvania 16438-8699 USA PH: 814-438-3821 FAX: 814-438-3069 e-mail: qd&v_sales@snap-tite.com www.snap-tite.com Industrial Estate Whitemill - Wexford Republic of Ireland PH: 353 53 914 1566 FAX: 353 53 914 1582 e-mail: ste_sales@snap-tite.com www.snap-tite.com TECHNICAL AND DIMENSIONAL INFORMATION* SIZE ! WARNING ! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND/OR PROPERTY DAMAGE. This document and other information from Snap-tite, Inc., its subsidiaries and authorized distributors, provides product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operation conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Snap-tite, Inc. and its subsidiaries at any time without notice. ISO-9001 Certified MAXIMUM WORKING MINIMUM BURST PRESSURE RATINGS PSI BAR PSI BAR D A C E A B A (Hex) B C D E IN MM IN MM IN MM IN MM IN MM 1/4" .88 22.35 1.19 30.23 2.01 51.05 1.80 45.72 .80 20.30 1/2" x 3/8" 1.19 30.23 1.38 35.05 2.41 61.21 2.30 58.42 .97 24.64 1/2" 1.19 30.23 1.38 35.05 2.50 63.50 2.38 60.45 .97 24.64 FLOW CHART - VALVED AND VALVED FLOW RATE (LPM) FLOW RATE (GPM) PRESSURE LOSS (PSI) PRESSURE LOSS (BAR) 88SSU (18cSt) oil .38 .76 1.14 1.51 1.89 2.27 2.65 3.03 3.41 3.79 7.57 11.36 15.14 18.93 22.71 26.50 30.28 34.07 37.85 75.70 113.60 2.07 1.38 .69 .62 .55 .48 .41 .34 .28 .21 .14 .07 .062 .055 .048 .041 .034 .027 .020 .013 .006 30 20 10 9 8 7 6 5 4 3 2 1 .9 .8 .7 .6 .5 .4 .3 .2 .1 .1 .2 .3 .4 .5 .6 .7 .8 .9 1 2 3 4 5 6 7 8 9 10 20 30 1/4" 1/2" 1/2" WITH 3/8" END FITTINGS Coupling Half F Female NPSF M Male NPT RP Female British Parallel BS2779 25 Material V Valved P** Plain (without valve) Body Type S Stainless Steel 316 Series End Fitting Size 4 = 1/4" 8 = 1/2" No letter- PTFE -100°F to 350°F -73°C to 177°C KF* Kel F -400°F to 300°F -240°C to 149°C HOW TO ORDER PART NO. S V 25 C 4 4 F C Coupler N Nipple Coupling Size 4 = 1/4" 6 = 3/8" 8 = 1/2" End Fitting Type Seal Material SL Sleeve Lock *Kel-F seal is installed in coupler only. Mating nipple supplied with PTFE only. **Valved nipple/plain coupler combination will not activate valving in nipple. Single shut-off should be specified with valving in coupler half. 1/4" 1,000 70 2,000 140 1/2" x 3/8" 1,000 70 2,000 140 1/2" 1,000 70 2,000 140 SIZE PRESSURE CAP DUST CAP DUST PLUG ACCESSORIES 1/4" SPC25-4 SDC25-4 SDP25-4 1/2" SPC25-8 SDC25-8 SDP25-8 *NOTE: Dimensions and outlines are the same for both valved and plain units. HIGH PRESSURE WATER BLAST COUPLING 56 SERIES Featuring… Snap-tite quality with superior pressure and flow characteristics over the competition Snap-tite's 56 Series is designed for rugged, high pressure water blasting equipment used in cleaning and paint stripping applications. Snap-tite has increased the working pressure to 12,000 psi (828 bar) while maintaining a 4:1 safety factor and interchangeability with competitive units. The 56 Series utilizes a proven dog-lock mechanism that increases surface contact and provides even load distribution under pressure thereby increasing the service life of the coupling. In addition to cleaning and paint removal, water blast equipment is also used in the cleaning of maritime vessels as well as the removal of mill scale in industrial applications. • Engineered for operating pressures to 12,000 psi (828 bar) with 4:1 safety factor • High strength steel construction with corrosion resistant Zinc Trivalent Chromate plating= • Proven dog-lock mechanism provides safe, positive connection and eliminates ball brinnelling • Interchangeable with Parker WB Series and Aeroquip FD69 Series • Nipple mounted sleeve guard and coupler sleeve lock aid in preventing accidental disconnection • Straight through bore provides minimal pressure drop • Available in 1/2" body size with 3/8" or 1/2" end fittings = Conforms with ROHS and WEEE European Union Directives TECHNICAL AND DIMENSIONAL INFORMATION FLOW CHART HOW TO ORDER PART NO. 56 C 8 8 F End Fitting Seals Type F Female NPTF No letter- Buna N V = Viton E = Ethylene Propylene Rubber Series C Coupler N Nipple Coupling Half 56 8 = 1/2" Coupling Size End Fitting Size 6 = 3/8" 8 = 1/2" 01-0084BE-0311 Industrial Estate Whitemill - Wexford Republic of Ireland PH: 353 53 914 1566 FAX: 353 53 914 1582 e-mail: ste_sales@snap-tite.com www.snap-tite.com Quick Disconnect & Valve Division 201 Titusville Road Union City, Pennsylvania 16438-8699 USA PH: 814-438-3821 FAX: 814-438-3069 e-mail: qd&v_sales@snap-tite.com www.snap-tite.com 1/2 12,000 828 48,000 3310 MAXIMUM WORKING MINIMUM BURST PRESSURE RATINGS PSI BAR PSI BAR SIZE 100 90 80 70 60 50 40 30 20 10 9 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 89 10 20 30 40 50 60 70 80 90 100 .07 .14 .21 .27 .34 .41 .48 .55 .62 .69 1.38 2.07 2.76 3.45 4.14 4.83 5.52 6.21 6.90 3.79 7.57 11.36 15.14 18.93 22.71 26.50 30.28 34.07 37.85 75.70 113.60 151.40 189.30 227.10 265.00 302.80 340.70 378.50 FLOW RATE (LPM) FLOW RATE (GPM) WATER PRESSURE LOSS (PSI) PRESSURE LOSS (BAR) H ENGAGEMENT C A B F E D A B C (HEX) D E (HEX) F H (ENG) IN MM IN MM IN MM IN MM IN MM IN MM IN MM 1/2 2.21 56.1 1.63 41.4 1.38 35.1 2.35 59.7 1.25 31.8 1.63 41.4 1.10 27.9 ! WARNING ! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND/OR PROPERTY DAMAGE. This document and other information from Snap-tite, Inc., its subsidiaries and authorized distributors, provides product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operation conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Snap-tite, Inc. and its subsidiaries at any time without notice. ISO-9001 Certified SIZE HYDRAULIC COUPLINGS 60 SERIES Featuring… Snap-tite quality with superior pressure and flow characteristics over the competition Snap-tite's 60 Series is designed to accommodate high surge flows found in demanding hydraulic applications. Typical applications include snow plows, agricultural equipment and construction equipment. The 60 Series will interchange with Aeroquip’s FD42 Series and Parker’s 4000 Series. The 60 Series coupler is provided with a retaining groove for bulkhead mounting. The poppet style valve design provides excellent sealing in both high and low pressure applications. The 60 Series offers up to 3000 psi (210 bar) operating pressure in both the connected and disconnected positions. • Interchangeable with Aeroquip FD42 and Parker 4000 Series • 4:1 Safety factor • Proven ball-lock mechanism provides positive connection • Poppet style shut-off • High strength steel construction • Zinc Trivalent Chromate plating for corrosion resistance= • Choice of seal materials to handle a variety of fluids • Sizes 1/4" & 3/8" =Conforms with ROHS and WEEE European Union Directives TECHNICAL AND DIMENSIONAL INFORMATION A B C D E F G H IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM 1/4" 2.15 54.61 .96 24.38 1.12 28.45 .88 22.35 1.56 39.62 .77 19.56 .75 19.05 .83 21.08 3/8" 2.41 61.21 1.31 33.27 1.38 35.05 1.19 30.23 1.76 44.70 .90 22.86 .94 23.88 1.03 26.16 A END FITTING SIZE END FITTING SIZE E F ENGAGEMENT G HEX C .03 DIA D HEX 60C* INC. 60N* B DIA ACROSS CORNERS H DIA ACROSS CORNERS FLOW CHART FLOW RATE (LPM) FLOW RATE (GPM) PRESSURE LOSS (PSI) PRESSURE LOSS (BAR) US GALLONS 6.90 6.21 5.52 4.83 4.14 3.45 2.76 2.07 1.38 .69 .62 .55 .48 .41 .34 .27 .21 .14 .07 .5 .6 .7 .8 .9 1.0 2 3 4 5 6 7 8 9 10 20 30 40 50 1.0 2 3 4 5 6 7 8 9 10 20 30 40 50 60 70 80 90 100 189.3 151.4 113.6 75.7 37.9 34.0 30.3 26.5 22.7 18.9 15.1 11.4 7.6 3.80 3.40 3.03 2.65 2.27 1.90 1/4" 3/8" 01-0022BE-0608 ! WARNING ! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND/OR PROPERTY DAMAGE. This document and other information from Snap-tite, Inc., its subsidiaries and authorized distributors, provides product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operation conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Snap-tite, Inc. and its subsidiaries at any time without notice. Industrial Estate Whitemill - Wexford Republic of Ireland PH: 353 53 914 1566 FAX: 353 53 914 1582 e-mail: ste_sales@snap-tite.com www.snap-tite.com Quick Disconnect & Valve Division 201 Titusville Road Union City, Pennsylvania 16438-8699 USA PH: 814-438-3821 FAX: 814-438-3069 e-mail: qd&v_sales@snap-tite.com www.snap-tite.com 1/4" 3,000 210 12,000 830 150 10 3/8" 3,000 210 12,000 830 150 10 MAXIMUM WORKING MINIMUM BURST MAXIMUM CONNECT BY HAND PRESSURE RATINGS PSI BAR PSI BAR PSI BAR SIZE HOW TO ORDER PART NO. 60 C 4- 4 F End Fitting Seals Options Type F Female NPTF RP Female British Parallel BS2779 SL Sleeve Lock Series C Coupler N Nipple Coupling Half 60 4 = 1/4" 6 = 3/8" Coupling Size End Fitting Size 4 = 1/4" 6 = 3/8" SIZE DUST PLUG/CAP (either/or) 1/4" 60PDCP-4 3/8" 60PDCP-6 ACCESSORIES ISO-9001 Certified No letter- Buna N V = Viton SIZE ISO Series A Interchange 61 SERIES 61 Series — ISO A Interchange Interchangeable with other manufacturers offering ISO Series A couplings Dimensional & performance requirements conform to ISO 7241-1 Series A 4:1 Safety Factor Proven ball-lock mechanism provides positive connection Poppet style shut-off High strength steel construction Zinc Trivalent Chromate plating= for corrosion resistance Choice of seal materials to handle a variety of fluids Sizes 1/4" – 1" Snap-tite's 61 Series is designed to conform to the dimensional and performance requirements of ISO 7241-1 Series A, which details the testing, performance and dimensions of the nipple. This is to enable interchangeability with couplings produced by other manufacturers who meet the same standard. Snap-tite's 61 Series features superior working pressures, flow characteristics and safety factors, making the 61 Series the premier ISO Series A interchange. 1/4" 4,600 317 18,400 1269 150 10 3/8" 4,600 317 18,400 1269 150 10 1/2" 4,000 276 16,000 1103 100 7 3/4" 4,000 276 16,000 1103 50 3 1" 3,000 207 12,000 828 40 3 MAXIMUM WORKING MINIMUM BURST MAXIMUM CONNECT BY HAND SIZE PSI BAR PSI BAR PSI BAR Featuring…Snap-tite quality with superior pressure and flow characteristics over the competition PRESSURE RATINGS =Conforms with ROHS and WEEE European Union Directives TECHNICAL AND DIMENSIONAL INFORMATION FLOW CHART FLOW RATE (LPM)* FLOW RATE (GPM)* PRESSURE LOSS (PSI) PRESSURE LOSS (BAR) A A (SAE) B C D E E (SAE) F G H IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM 1/4" 1.94 49.28 .88 22.35 1.06 26.92 .75 19.05 1.45 19.05 .64 16.26 .75 19.05 .83 21.08 1/4" x 3/8" 1.94 49.28 .88 22.35 1.06 26.92 .81 20.57 1.45 19.05 .64 16.26 .81 20.57 .89 22.60 3/8" 2.34 59.44 1.06 26.92 1.27 32.25 .88 22.35 1.76 44.70 .82 20.83 .88 22.35 .96 24.38 3/8" x 1/2" 2.34 59.44 1.06 26.92 1.27 32.25 1.00 25.40 1.76 44.70 .82 20.83 1.00 25.40 1.10 27.94 1/2" 2.71 68.83 2.71 68.83 1.19 30.23 1.50 38.10 1.00 25.40 2.00 50.80 2.00 50.80 1.00 25.40 1.06 26.92 1.17 29.72 1/2" x 5/8" 2.71 68.83 1.19 30.23 1.50 38.10 1.13 28.70 2.00 50.80 1.00 25.40 1.13 28.70 1.24 31.50 3/4" 3.27 83.06 3.27 83.06 1.61 40.89 1.88 47.75 1.38 35.05 2.44 61.98 2.44 61.98 1.31 33.27 1.38 35.05 1.51 38.35 1" 3.68 93.47 3.68 93.47 1.86 47.24 2.13 54.10 1.63 41.40 2.67 67.82 2.67 67.82 1.59 40.39 1.63 41.40 1.79 45.47 US GALLONS SIZE E F-ENGAGEMENT C .03 DIA D FLATS B DIA END FITTING SIZE 61C* A G HEX H DIA ACROSS CORNERS 61N* END FITTING SIZE INC. *150 ssu (32 cSt) oil at 100°F (40°C) 100 90 80 70 60 50 40 30 20 10 9 8 7 6 5 4 2 3 1.0 .1 .2 .3 .4 .5 .6 .7 .8 .9 1.0 2 3 4 5 6 7 8 9 10 20 30 40 50 60 70 80 90 100 .38 .76 1.14 1.51 1.90 2.27 2.65 3.03 3.40 3.80 7.6 11.4 15.1 18.9 22.7 26.5 30.3 34.0 37.9 75.7 113.6 151.4 189.3 227.0 265.0 303.0 340.7 378.5 6.90 6.21 5.52 4.83 4.14 3.45 2.76 2.07 1.38 .69 .62 .55 .48 .41 .34 .27 .21 .14 .07 1/4" 3/8" 1/2" 3/4" 1" FLOW RATE (LPM)* FLOW RATE US GALLONS PRESSURE LOSS (PSI) PRESSURE LOSS (BAR) *150 SSU (32CsT) OIL AT 1000 F (400 C) ! WARNING ! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND/OR PROPERTY DAMAGE. This document and other information from Snap-tite, Inc., its subsidiaries and authorized distributors, provides product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operation conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Snap-tite, Inc. and its subsidiaries at any time without notice. DISTRIBUTED BY: HOW TO ORDER PART NO. 61 C 6- 6 F Series C Coupler N Nipple Coupling Half 61 4 = 1/4" 6 = 3/8" 8 = 1/2" 12 = 3/4" 16 = 1" Coupling Size End Fitting Size Seals Options 4 = 1/4" 6 = 3/8" 8 = 1/2" 10 = 5/8" 12 = 3/4" 16 = 1" End Fitting Type F Female NPTF RP Female British Parallel BS2779 EF* Female SAE Std. seal is Buna V = Viton E = Ethylene Propylene Rubber M = MIL-H-5606 SL Sleeve Lock *SAE Threads: 1/4" is supplied with 3/8" SAE (4-6EF) only 3/8" is supplied with 1/2" SAE (6-8EF) only 1/2" can be supplied with 5/8" SAE (8-10EF) if required All others are size for size (8-8EF, 12-12EF, 16-16EF) DUST PLUG DUST CAP 1/4" 3/8" 1/2" 3/4" 1" 61PDP-4 PDP-8 61PDP-8 61PDP-12 61PDP-16 61PDC-4 PDC-8 PDC-12 61PDC-12 61PDC-16 ACCESSORIES 01-0044BE-1208 Quick Disconnect & Valve Division 201 Titusville Road Union City, Pennsylvania 16438-8699 USA PH: 814-438-3821 FAX: 814-438-3069 e-mail: qd&v_sales@snap-tite.com www.snap-tite.com Industrial Estate Whitemill - Wexford Republic of Ireland PH: 353 53 914 1566 FAX: 353 53 914 1582 e-mail: ste_sales@snap-tite.com www.snap-tite.com ISO-9001 Certified ISO Series B Interchange 72 SERIES 72 Series — ISO Series B Interchange Sizes 1/8" – 1" Yellow Zinc Chromate plated steel†, stainless steel (303 & 316) and brass are standard Wide choice of seal materials to handle a variety of fluids Proven ball-lock mechanism provides positive connection Poppet style double shut-off Industry interchangeability…couplers (sockets) and nipples (plugs) are interchangeable with other manufacturers offering ISO Series B couplings Snap-tite's 72 Series is designed to meet or exceed ISO 7241-1 Series B. This ISO specification stipulates the test specification of the couplings and the dimensions of the nipple so the couplings will interchange with those of other manufacturers meeting this same specification. Snap-tite's 72 Series features superior pressure and flow characteristics over the other manufacturers making the 72 Series the premier ISO Industrial Interchange. 1/8" 5,000 345 20,000 1,380 4,000 280 16,000 1,105 3,000 210 12,000 830 1/4" 7,500 520 30,000 2,070 5,500 380 22,000 1,520 3,750 260 15,000 1,035 3/8" 5,000 345 20,000 1,380 3,750 260 15,000 1,035 2,750 190 11,000 760 1/2" 5,000 345 20,000 1,380 3,750 260 15,000 1,035 3,000 210 12,000 830 3/4" 4,000 280 16,000 1,105 3,000 210 12,000 830 2,200 155 8,800 610 1" 4,000 280 16,000 1,105 3,000 210 12,000 830 1,500 105 6,000 415 STEEL STAINLESS STEEL BRASS SIZE PSI BAR PSI BAR PSI BAR PSI BAR PSI BAR PSI BAR Featuring…Snap-tite quality with superior pressure and flow characteristics over the competition. PRESSURE RATINGS Double shut-off (Valved and Valved) MAXIMUM MINIMUM MAXIMUM MINIMUM MAXIMUM MINIMUM WORKING BURST WORKING BURST WORKING BURST †Conforms with ROHS and WEEE European Union Directives A A (SAE) B C D E E (SAE) F G H IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM 1/8" 2.02 51.30 .82 20.83 .93 23.62 .69 17.53 1.38 35.05 .85 21.59 .56 14.22 .62 15.75 1/8" x 1/4" 2.06 52.32 .82 20.83 .93 23.62 .69 17.53 1.42 36.07 .85 21.59 .68 17.27 .76 19.30 1/4" 2.25 57.15 .88 22.35 1.12 28.45 .75 19.05 1.51 38.35 .95 24.13 .75 19.05 .83 21.08 1/4" x 3/8" 2.41 61.21 .88 22.35 1.12 28.45 .75 19.05 1.67 42.42 .95 24.13 .88 22.35 .96 24.38 3/8" 2.57 65.28 1.13 28.70 1.38 35.05 1.00 25.40 1.74 44.20 1.13 28.70 .88 22.35 .96 24.38 3/8" x 1/2" 2.77 70.36 1.13 28.70 1.38 35.05 1.00 25.40 1.94 49.28 1.13 28.70 1.00 25.40 1.10 27.94 1/2" 2.95 74.93 2.95 74.93 1.37 34.80 1.75 44.45 1.25 31.75 2.01 51.05 2.01 51.05 1.27 32.26 1.13 28.70 1.24 31.50 1/2" x 5/8" 3.02 76.71 1.37 34.80 1.75 44.45 1.25 31.75 2.08 52.83 1.27 32.26 1.19 30.23 1.31 33.27 3/4" 3.48 88.39 3.69 97.73 1.75 44.45 2.13 54.10 1.50 38.10 2.33 59.18 2.54 64.52 1.64 41.66 1.38 35.05 1.51 38.35 1" 4.14 105.16 4.14 105.16 2.00 50.80 2.50 63.50 1.75 44.45 2.81 71.37 2.81 71.37 1.87 47.50 1.63 41.40 1.79 45.47 E F-ENGAGEMENT C .03 DIA D FLATS B DIA 72C* A G HEX H DIA ACROSS CORNERS 72N* INC. SIZE FLOW CHART US GALLONS TECHNICAL AND DIMENSIONAL INFORMATION 100 90 80 70 60 50 40 30 20 10 9 87 6 5 4 3 2 1 3.79 7.57 11.36 15.14 18.93 22.71 26.50 30.28 34.07 37.85 75.70 113.60 151.40 189.30 227.10 265.00 302.80 340.70 378.50 757.00 6.90 6.21 5.52 4.83 4.14 3.45 2.76 2.07 1.38 .69 .62 .55 .48 .41 .34 .27 .21 .14 .07 1 2 3 4 5 6 7 89 10 20 30 40 50 60 70 80 90 100 200 FLOW RATE (GPM) (MIL-H-6083 @ 90F 5F) PRESSURE LOSS (BAR) FLOW RATE (LPM) PRESSURE LOSS (PSI) 1/8" 1/4" 3/8" 1/2" 3/4" 1" ! WARNING ! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND/OR PROPERTY DAMAGE. This document and other information from Snap-tite, Inc., its subsidiaries and authorized distributors, provides product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operation conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Snap-tite, Inc. and its subsidiaries at any time without notice. DISTRIBUTED BY: 01-0048BE-1006 Quick Disconnect & Valve Division 201 Titusville Road Union City, Pennsylvania 16438-8699 USA Ph: 814-438-3821 Fax: 814-438-3069 e-mail: qd&v_sales@snap-tite.com www.snap-tite.com Industrial Estate Whitemill - Wexford Republic of Ireland Ph: 353 53 914 1566 Fax: 353 53 914 1582 e-mail: ste_sales@snap-tite.com www.snap-tite.com DUST CAP/ PLUG 1/8" 1/4" 3/8" 1/2" 3/4" 1" 72PDCP-2 72PDCP-4 72PDCP-6 72PDCP-8 72PDCP-12 72PDCP-16 ACCESSORIES HOW TO ORDER PART NO. S 72 C 4- 4 F Series C Coupler N Nipple Coupling Half 72 2 = 1/8" 4 = 1/4" 6 = 3/8" 8 = 1/2" 12 = 3/4" 16 = 1" Coupling Size End Fitting Size Seals Options 2 = 1/8" 4 = 1/4" 6 = 3/8" 8 = 1/2" 10 = 5/8" 12 = 3/4" 16 = 1" End Fitting Type F* Female NPTF RP Female British Parallel BS2779 EF† Female SAE (Steel & 303 SST Only) No letter for Buna-N (nitrile) V Viton E Ethylene Propylene Rubber SL Sleeve Lock Material No letter Steel, plated S 303 Stainless Steel SS 316 Stainless Steel B Brass *316 stainless steel construction supplied with female NPSF threads †SAE Threads: • 1/8" is supplied with 1/4" SAE (2-4EF) only • 1/4" is supplied with 3/8" SAE (4-6EF) only • 3/8" is supplied with 1/2" SAE (6-8EF) only • 1/2" can be supplied with 5/8" SAE (8-10EF) if required • All others are size for size (8-8EF, 12-12EF, 16-16EF) Dust cap/plugs have a cap and plug on the same strap for use on either a coupler or a nipple. ISO-9001 Certified Ultra High Pressure Couplings 73 SERIES The 73 Series is designed specifically for waterjet, waterblast, oilfield injection and test systems where ultra-high pressures are PRESSURE DROP* common place. 73 Series — Ultra High Pressure Couplings Designed for operating pressures to 43,500 psi (3000 bar). Stainless steel construction. Available in 1/4” size. Positive locking collar prevents accidental disconnection. Rugged heavy duty construction with superior flow characteristics. PRESSURE RATINGS STAINLESS STEEL MAX. WORKING MIN. BURST PSI BAR PSI BAR 1/4” 43,500 3000 87,000 6000 SIZE (inches) Featuring…Snap-tite quality with superior pressure and flow characteristics over the competition. 100 90 80 70 60 50 40 30 20 10 987 6 5 4 3 2 1 .1 .2 .3 .4 .5 .6 .7 .8 1.0 2 3 4 5 6 7 8 910 20 30 .07 .14 .21 .27 .34 .41 .48 .55 .62 .69 1.38 2.07 2.76 3.45 4.14 4.83 5.52 6.21 6.90 .38 .76 1.14 1.51 1.90 2.27 2.65 3.03 3.41 3.80 7.57 11.36 15.14 18.93 22.71 26.50 30.28 34.07 37.85 75.70 113.55 Cv = .17 Cv = .21 Cv = .29 Cv = .37 Cv = .63 Cv = .81 F562C F562C F375C F375C F250C F250C PRESSURE LOSS, PSI PRESSURE LOSS, (BAR) FLOW RATE (GPM) WATER *All Flow/Pressure loss values, including Cv factors, are with coupling halves with the same end fitting on each half as shown. FLOW RATE (LPM) Plain Coupling Valved Coupling Pressures to 43,500 psi (3000 bar) Pressures to 10,000 psi (689 bar) TECHNICAL AND DIMENSIONAL INFORMATION IN. mm .75 19.05 .34 8.64 VALVED PLAIN IN. mm .75 19.05 .34 8.64 IN. mm .66 16.76 .25 6.35 IN. mm .56 14.22 .56 14.22 IN. mm .55 13.97 .55 13.97 IN. mm .85 21.59 .48 12.19 IN. mm .85 21.59 .48 12.19 IN. mm .75 19.05 .38 9.65 IN. mm .56 14.22 .56 14.22 IN. mm .56 14.22 .56 14.22 Pressures to 20,000 psi (1379 bar) IN. mm .85 21.59 .41 10.41 IN. mm .88 22.35 .88 22.35 IN. mm 1.00 25.40 1.00 25.40 IN. mm .75 19.05 .31 7.87 IN. mm .69 17.53 .69 17.53 IN. mm .63 16.00 .63 16.00 IN. mm 1.12 28.45 1.12 28.45 IN. mm .78 19.81 .78 19.81 IN. mm .50 12.70 .50 12.70 AVAILABLE END FITTINGS * - No increase in overall length IN. mm .45 11.43 .00 0.00 A B C IN. mm IN. mm IN. mm VALVED 2.65 67.31 2.11 53.59 3.64 92.46 PLAIN 2.33 59.18 1.73 43.94 2.93 74.42 VALVED PLAIN VALVED PLAIN VALVED PLAIN * 1.50" DIA (38.1) END FITTING 1.50" DIA (38.1) A TO LOCK COUPLER B END FITTING 1.50" DIA (38.1) 1.12" ENGAGEMENT (28.4) NIPPLE C CONNECTED TO LOCK 1/4" NPTF 1/4" RP 1/4" SAE 1/4" MALE NPT 1/4" MALE SAE 3/8" NPTF 3/8" RP 3/8" SAE 3/8" MALE NPT 3/8" MALE SAE 3/8" MP SF375CX 9/16" MP SF562CX 3/8" MP SM375CX 9/16" MP SM562CX 1/4" HP M250C 1" REVERSE CONE (AUTOCLAVE RH16) 3/4" REVERSE CONE 9/16" HP M562C (AUTOCLAVE RH12) 9/16" REVERSE CONE (AUTOCLAVE RH9) 1/4" HP F250C DISTRIBUTED BY: ! WARNING ! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND/OR PROPERTY DAMAGE. This document and other information from Snap-tite, Inc., its subsidiaries and authorized distributors provides product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operation conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Snap-tite, Inc. and its subsidiaries at any time without notice. 01-0010BE-0302 *Other end fittings available upon request ISO-9001 Certified Quick Disconnect & Valve Division 201 Titusville Road Union City, Pennsylvania 16438-8699 USA Ph: 814-438-3821 Fax: 814-438-3069 email: qd&v_sales@snap-tite.com www.snap-tite.com Industrial Estate Whitemill-Wexford Republic of Ireland Ph: 353 53 914 1566 Fax: 353 53 914 1582 email: ste_sales@snap-tite.com www.snap-tite.com Material Body Type Series Coupling Half Coupling Size Seal Material S V 73 C 4 = 1/4” No letter Stainless Valved Series Coupler Buna N Steel P N E Plain Nipple Ethylene Propylene HOW TO ORDER PART NO. S V 73 C 4 - SF562CX End Fitting Type* Pressures to 10,000 psi (689 bar) -4F 1/4” Female NPTF -4EF 1/4” Female SAE -4RP 1/4” Female British Parallel BS2779 -4M 1/4” Male NPT -4EM 1/4” Male SAE -6F 3/8” Female NPTF -6EF 3/8” Female SAE -6RP 3/8” Female British Parallel BS2779 -6M 3/8” Male NPT -6EM 3/8” Male SAE Pressures to 20,000 psi (1379 bar) SF562CX 9/16” Female Medium Pressure SF375CX 3/8” Female Medium Pressure SM562CX 9/16” Male Medium Pressure SM375CX 3/8” Male Medium Pressure Pressures to 43,500 psi (3000 bar) M562C 9/16” High Pressure Male RH9 9/16” Reverse Cone RH12 3/4” Reverse Cone RH16 1” Reverse Cone F250C 1/4” Female High Pressure M250C 1/4” Male High Pressure Heavy Duty Threaded Connection in a Wide Range of Sizes The rugged 75 Series is designed and constructed for high pressure hydraulic service. Although these couplings are used in a broad variety of heavy duty applications, a primary usage is in oil fields and offshore drilling. Other applications include cranes, power tongs, horizontal boring and dewatering. Available in sizes 3/4" through 4", in steel or stainless steel construction. The 3/4" size has a hex nut sleeve. All other sizes have a wing nut style connection. 75 Series Features: • Connect under residual pressure • Up to 5,000 psi (345 bar) rated pressures • Thread-to-connect • Rugged steel construction with Zinc Trivalent Chromate plating Snap-tite 75 Series Thread-to-Connect Coupling Contact Information: Parker Hannifin Corporation Quick Coupling Division 8145 Lewis Road Minneapolis, MN 55427 phone 763 544 7781 fax 763 544 3418 qcd_sales@parker.com www.parker.com/quickcouplings • Stainless steel construction also available • Wide range of sizes • Choice of seal materials to handle a variety of fluids • DBP version is "Fire Safe" rated to API 16D Torque Values for Connecting Under Pressure ** ** Size 3/4" 100 90 80 70 60 50 40 30 20 10 9 8 7 6 5 4 3 2 1 37.90 75.70 113.60 151.40 189.30 227.00 265.00 303.00 340.70 378.50 757.00 1135.50 1514.00 1892.50 2271.00 2649.50 3028.00 3406.50 3785.00 FLOW RATE (gpm) 88 SSU (18 cSt) oil PRESSURE LOSS (bar) PRESSURE LOSS (psi) 6.90 6.21 5.52 4.83 4.14 3.45 2.76 2.07 1.38 .69 .62 .55 .48 .41 .34 .27 .21 .14 .07 10 20 30 40 50 60 70 80 90 100 200 300 400 500 600 700 800 900 1000 1" 1-1/4" 2" 2-1/2" 3" 4" FLOW RATE (lpm) 1-1/2" 1-1/2" 2" 1" 1-1/4" 3/4" 10000 9000 8000 7000 6000 5000 4000 3000 2500 2000 1500 1000 900 800 700 600 500 400 300 250 200 150 100 100 150 200 250 300 400 500 600 700 800 900 1000 1500 2000 2500 3000 4000 5000 6000 7000 8000 9000 1130.00 1017.00 904.00 791.00 678.00 565.00 452.00 339.00 282.50 226.00 169.50 113.00 101.70 90.40 79.10 67.80 56.50 45.20 33.90 28.25 22.60 16.95 11.30 10000 6.90 10.34 13.79 17.24 20.69 27.59 34.48 41.38 48.28 55.17 62.07 68.97 103.45 137.93 172.41 206.90 275.86 344.83 413.79 482.76 551.72 620.69 689.66 INTERNAL PRESSURE (psig) INTERNAL PRESSURE (bar) TORQUE (N.m.) TORQUE (inch pounds) MAXIMUM RECOMMENDED CONNECTING PRESSURE 3/4" thru 4" *Hex dimensions are taken from flat of hex and not across corners. Decimal dimensions are ± .06 in. (1.5mm) Dimensions are subject to change without notice. Part configurations are typical and do not necessarily represent actual appearance. **Wrench flats are special order. See "How to Order". Technical and Dimensional Information Flow Chart 3/4" 100 90 80 70 60 50 37.90 75.70 113.60 151.40 189.30 227.00 265.00 303.00 340.70 378.50 757.00 1135.50 1514.00 1892.50 2271.00 2649.50 3028.00 3406.50 3785.00 6.90 6.21 5.52 4.83 4.14 3.45 1" 1-1/4" 2" 2-1/2" 3" 4" FLOW RATE (lpm) 1-1/2" 1-1/2" 2" 1" 1-1/4" 3/4" 10000 9000 8000 7000 6000 5000 4000 3000 2500 2000 1500 1000 900 800 700 600 500 400 300 250 200 150 100 100 150 200 250 300 400 500 600 700 800 900 1000 1500 2000 2500 3000 4000 5000 6000 7000 8000 9000 1130.00 1017.00 904.00 791.00 678.00 565.00 452.00 339.00 282.50 226.00 169.50 113.00 101.70 90.40 79.10 67.80 56.50 45.20 33.90 28.25 22.60 16.95 11.30 10000 6.90 10.34 13.79 17.24 20.69 27.59 34.48 41.38 48.28 55.17 62.07 68.97 103.45 137.93 172.41 206.90 275.86 344.83 413.79 482.76 551.72 620.69 689.66 INTERNAL PRESSURE (psig) INTERNAL PRESSURE (bar) TORQUE (N.m.) TORQUE (inch pounds) MAXIMUM RECOMMENDED CONNECTING PRESSURE A B C (Dia.) D E (Dia.) F G H (ACME) in mm in mm in mm in mm in mm in mm in mm 3/4" 4.85 123.19 1.87* 47.50* 2.84 72.14 1.75 44.45 1.35 34.29 3.27 83.06 1-3/4"-8 1" 6.04 153.32 4.25 107.95 2.75 69.85 3.45 87.63 2.25 57.15 1.77 44.96 4.17 105.92 2-1/4"-6 1-1/4" 7.76 197.10 4.75 120.65 3.25 82.55 4.40 111.76 2.62 66.55 2.14 54.36 5.36 136.14 2-5/8"-6 1-1/2" 8.70 220.98 5.75 146.05 3.75 95.25 5.04 128.02 3.24 82.30 2.50 63.50 5.97 151.64 3-1/4"-4 2" 10.05 255.27 6.75 171.45 4.75 120.65 6.07 154.18 4.00 101.60 3.25 82.55 7.05 179.07 4"-4 2-1/2" 10.13 257.30 8.00 203.20 6.00 152.40 5.29 134.37 5.00 127.00 3.38 85.85 7.46 189.48 5"-4 3" 10.58 268.73 8.50 215.90 6.50 165.10 5.84 148.34 6.00 152.40 4.25 107.95 8.26 209.80 6"-4 4" 12.36 313.94 11.00 279.40 7.00 177.80 7.11 180.59 6.63 168.40 5.25 133.35 9.40 238.76 6-5/8"-4 Dust Plugs and Caps Size Dust Plug Dust Cap 3/4" 75MDP-12 75MDC-12 1" 75MDP-16 75MDC-16 1-1/4" 75MDP-20 75MDC-20 1-1/2" 75MDP-24 75MDC-24 2" 75MDP-32 75MDC-32 2-1/2" 75MDP-40 75MDC-40 4" 75MDP-64 75MDC-64 Repair Kits Each kit contains a valve assembly, spring and guide stop. Consult QCD for "DBP" option seal kits. PSI Bar PSI Bar PSI Bar Pressure Ratings 3/4" 8 12 5,000 345 20,000 1379 3,000 207 1" 16 25 5,000 345 20,000 1379 3,000 207 1-1/4" 31 48 5,000 345 15,000 1035 3,000 207 1-1/2" 64 98 5,000 345 15,000 1035 3,000 207 2" 141 205 5,000 345 15,000 1035 3,000 207 2-1/2" 204 368 3,000 207 6,000 414 - - 3" 320 480 3,000 207 6,000 414 - - 4" 400 610 400 28 1,000 69 - - Size Spillage Air Inclusion (cc) (cc) Burst pressures listed were taken at the point at which failure rendered the quick-disconnect inoperative. (Proof pressure equals 1-1/2 times the operating pressure). NOTE: Pressure Ratings were established under static pressure conditions. For impulse applications, multiply the above pressure ratings by .6 for approximate pressure ratings. -Contact QCD Size Coupler Kit Nipple Kit 3/4" 75C12-SPK 75N12-SPK 1" 75C16-SPK 75N16-SPK 1-1/4" 75C20-SPK 75N20-SPK 1-1/2" 75C24-SPK 75N24-SPK 2" 75C32-SPK 75N32-SPK 2-1/2" 75C40-SPK 75N40-SPK 4" 75C64-SPK 75N64-SPK * For sizes up to 3", NPTF threads. For sizes over 3", NPT threads. **Not available on 2" EF coupler. Standard on 2-1/2" and larger sizes (code not needed). ***DBP available in 3/4" through 2" sizes. Steel material only. †Seal material code not applicable with DBP option-leave blank. 75 C 12 - 12 F Material: Blank = Steel plated S = 316 Stainless Steel Series: 75 Coupling Half: C = Coupler N = Nipple Coupling Body Size: 12 = 3/4" 16 = 1" 20 = 1-1/4" 24 = 1-1/2" End Fitting Size: 12 = 3/4" 16 = 1" 20 = 1-1/4" 24 = 1-1/2" End Fitting Type: F* = Female Pipe NPTF for Steel - NPT for 316 SST EF = Female SAE RP = Female British Parallel BS2779 Seals: Blank = Nitrile V = Flourocarbon E = Ethylene Propylene Rubber Options: W** = Wrench Flats on body Ordering Information Options: DBP*** = "Fire Safe" BOP version 3/4" thru 2" steel sizes only 32 = 2" 40 = 2-1/2" 48 = 3" 64 = 4" 32 = 2" 40 = 2-1/2" 48 = 3" 64 = 4" Note: Not all configurations are standard product offering. Contact QCD for price and delivery. Maximum Working Pressure Maximum Burst Pressure Maximum Working Pressure Steel Only Steel Only 316 Stainless (Connected Only) © 2013 Parker Hannifin Corporation Bulletin 3800-ST75 /USA 5000 5/13 QCD KP HYDRAULIC COUPLINGS 76 SERIES Featuring… Snap-tite quality with superior pressure and flow characteristics over the competition The Snap-tite 76 Series Thread-to-Connect Hydraulic Coupling was created for high pressure extreme applications such as are found on hydraulic rams, pumps, bolt tensioners and rescue equipment. The 76 Series is designed to interchange with a number of competitive coupling products such as Parker 3000, Faster PVVM, Enerpac C-604 and others of similar construction. This coupling has the ability to connect and disconnect under pressure while exceeding most competitor's maximum pressure specifications. • High strength soft seat poppet valves insure zero leakage and higher flow rates than commonly used metal-to-metal sealing ball design • Heavy duty steel construction with Zinc Trivalent Chromate plating= for excellent corrosion resistance • Working pressures up to 14,500 psi (1,000 bar) • Available in 1/4" and 3/8" sizes • The specially designed threaded sleeve has knurling at the front to facilitate connection by hand. The hex at the back allows connection with the use of a wrench • The couplings are available with male NPT, female NPSF or female British parallel BS2779 end fittings. The nipples are available with female NPSF or female British parallel BS2779 end fittings. Other end fittings are available, consult factory =Conforms with ROHS and WEEE European Union Directives TECHNICAL AND DIMENSIONAL INFORMATION FLOW CHART FLOW RATE (LPM) FLOW RATE (GPM) PRESSURE LOSS (PSI) PRESSURE LOSS (BAR) US GALLONS 01-0015BE-1008 ! WARNING ! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND/OR PROPERTY DAMAGE. This document and other information from Snap-tite, Inc., its subsidiaries and authorized distributors, provides product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operation conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Snap-tite, Inc. and its subsidiaries at any time without notice. Industrial Estate Whitemill - Wexford Republic of Ireland PH: 353 53 914 1566 FAX: 353 53 914 1582 e-mail: ste_sales@snap-tite.com www.snap-tite.com Quick Disconnect & Valve Division 201 Titusville Road Union City, Pennsylvania 16438-8699 USA PH: 814-438-3821 FAX: 814-438-3069 e-mail: qd&v_sales@snap-tite.com www.snap-tite.com PERFORMANCE Maximum Working Pressure (bar) 14,500 psi (1000) 14,500 psi (1000) Minimum Burst Pressure (bar) 29,000 psi (2000) 29,000 (2000) Torque to connect at 500 psi (35 bar) 20 in. lb. (0.23 kg.m.) 60 in. lb. (07 kg.m.) Spillage upon disconnect at 15 psi (1 bar) 0.80 cc 0.95 cc SIZE DUST PLUG DUST CAP 1/4" 76MDP-4 76MDC-4 3/8" 76MDP-6 76MDC-6 ACCESSORIES* ISO-9001 Certified A B (Hex) C D E (Hex) F (Hex) G (Engagement) H IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM 1/4" 2.60 66.04 1.250 31.70 1.39 35.30 .96 24.30 0.875 22.20 1.00 25.40 .72 18.20 2.55 64.70 3/8" 2.97 75.40 1.375 34.90 1.62 41.40 1.10 27.90 1.00 25.40 1.25 31.80 .99 25.10 3.01 76.50 H E B D A B F G C ENGAGEMENT H E B D A B F G C ENGAGEMENT H E B D A B F G C ENGAGEMENT 100 90 80 70 60 50 40 30 20 10 987 6 5 4 3 2 1 FLOW RATE (gpm) 150 ssu (32cSt) oil US GALLONS PRESSURE (bar) PRESSURE LOSS (psi) FLOW RATE (lpm) 6.90 6.21 5.52 4.83 4.14 3.45 2.76 2.07 1.38 .69 .62 .55 .48 .41 .34 .27 .21 .14 .07 1.14 1.51 2.65 1.90 2.27 3.40 3.79 3.03 11.36 7.75 15.14 18.93 22.71 26.50 30.28 37.85 34.07 .3 .4 .7 .5 .6 .9 1 .8 3 2 4 5 6 78 10 9 1 / 4 " 3 / 8 " 1/4" 3/8" HOW TO ORDER PART NO. 76 C 6- 6 F End Fitting Type F Female NPSF RP Female British Parallel BS2779 M* Male NPT *Available on coupler only Series C Coupler N Nipple Coupling Half 76 4 = 1/4" 6 = 3/8" Coupling Size End Fitting Type 4 = 1/4" 6 = 3/8" *Dust caps and dust plugs are manufactured from plated carbon steel Standard seal is Buna N (Code A). For other seal materials, consult factory. SIZE Check Valves Note: Gallons shown are in U.S. gallons. †Applies to all Inline Check Valve styles. CPIFF Inline Check Valves  Poppet style – soft seat  Flow rates to 30 gpm (115 l/min)  Steel Construction; other materials available  Five sizes - 1/4", 3/8", 1/2", 3/4", 1"  SAE, NPSF & BS 2779 female end fittings  Up to 5000 psi (345 bar) working pressure Features The soft seat (virtual zero leak) guided poppet design and 4:1 safety factor of Snap-tite’s Inline Check Valves make them an excellent choice for a wide variety of applications where free flow in one direction and blocked flow in the reverse direction is required. The streamlined soft seated poppet offers minimum restriction to flow and positive shut off. These valves can be provided with various spring pressures and seal options compatible with most types of fluids. †Notes: – Decimal dimensions are +/-.015 in. (.38 mm). – Ratings, specifications, and dimensions are subject to change without notice. – Part configurations are typical and do not necessarily represent actual appearance. – Consult factory for certified drawing of 6C/3C end fitting configurations. †Flow Direction Size 1/4" 3/8" 1/2" 3/4" 1" In. .75 1.00 1.25 1.38 1.75 mm 19.05 25.40 31.75 35.05 44.45 In. 1.97 2.60 3.25 4.33 4.78 mm 50.04 66.04 82.55 109.98 121.41 .60 1.20 2.40 4.10 7.15 lbs. .20 .25 .90 1.25 2.25 kg. .09 .11 .41 .57 1.02 gpm 3.00 8.00 12.00 20.00 30.00 l/min. 11.40 30.30 45.40 75.70 113.55 Dimensions and Specifications Hex Length Cv Weight Flow PRESSURE DROP (bar) PRESSURE DROP (psi) FLOW (l/min) HYDRAULIC OIL AT 38°C, FULLY OPEN FLOW (gpm) HYDRAULIC OIL AT 100°C, FULLY OPEN 100 30 20 10 5.0 4.0 3.0 2.0 1.0 .5 .4 .3 .2 .1 .1 .2 .3 .4 .5 1.0 2.0 3.0 4.0 5.0 10 20 30 100 6.90 3.45 2.76 2.07 1.38 .69 .35 .28 .21 .14 .07 .034 .028 .021 .014 .007 .38 .76 1.36 1.51 1.89 3.79 7.57 11.36 15.14 18.93 37.85 75.70 113.55 378.50 1/4" 3/8" 1/2" 3/4" 1" – 2 – Note: Gallons shown are in U.S. gallons. 6C/3C Inline Check Valves  Poppet style – soft seat  Steel or stainless steel construction; other materials available  Flow rates to 175 gpm (662 l/min)  SAE, NPSF, NPT, BS 2779 & ORS end fittings available  Up to 6000 psi (414 bar) working pressure - 1/4", 3/8", 1/2", 3/4" & 1"  Up to 3000 psi (207 bar) working pressure - 1-1/4", 1-1/2" & 2" Features These soft seat (virtual zero leak), with guided poppet valves offer a wide variety of end fitting configurations and elastomers and the option of 316 stainless steel construction. These options enable a valve to be configured to meet the needs of any system. Snap-tite’s versatile 6C/3C Inline Check Valves are designed with a 4:1 safety factor at a maximum working pressure of 6000 psi (414 bar) making them ideal for any application. *Dimensions and Specifications Size 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" In. .75 1.12 1.25 1.62 1.88 2.00 2.50 3.25 mm 19.05 28.45 31.75 41.15 47.75 50.80 63.50 82.55 In. 2.82 3.38 3.73 4.91 6.07 5.76 6.51 7.28 mm 71.60 85.85 94.75 124.70 154.20 146.30 165.35 184.90 .45 1.80 3.40 7.40 9.50 12.30 16.15 21.80 lbs. .29 .81 1.20 2.05 3.40 3.75 7.80 13.00 kg. .13 .37 .54 .93 1.54 1.70 3.54 5.90 gpm 3.00 8.00 12.00 20.00 30.00 90.00 125.00 175.00 l/min. 11.40 30.30 45.45 75.70 113.55 340.65 473.15 662.40 Hex Length Cv Weight Flow 100 30 20 10 5.0 4.0 3.0 2.0 1.0 .5 .4 .3 .2 .1 .1 .2 .3 .4 .5 1.0 2.0 3.0 4.0 5.0 10 20 30 100 .007 .014 .021 .028 .034 .07 .14 .21 .28 .35 .69 1.38 2.07 2.76 3.45 6.90 378.50 113.55 75.70 37.85 18.93 15.14 11.36 7.57 3.79 1.89 1.51 1.36 .76 .38 1/4" 3/8" 1/2" 3/4" 1" 500 400 300 200 100 50 40 30 20 10 10 20 30 40 50 100 200 500 .69 1.38 2.07 2.76 3.45 6.90 13.79 20.69 27.59 34.48 1892.50 757.00 378.50 189.25 151.40 113.55 75.70 37.85 2" 1-1/4" 1-1/2" PRESSURE DROP (bar) PRESSURE DROP (psi) FLOW (l/min) HYDRAULIC OIL AT 38°C, FULLY OPEN FLOW (gpm) HYDRAULIC OIL AT 100°C, FULLY OPEN PRESSURE DROP (bar) PRESSURE DROP (psi) FLOW (l/min) HYDRAULIC OIL AT 38°C, FULLY OPEN FLOW (gpm) HYDRAULIC OIL AT 100°C, FULLY OPEN – 3 – *Dimensions shown are for NPTF ported valves; for other end fitting configurations consult factory. Note: Gallons shown are in U.S. gallons. Δ Applies to all Cartridge Check Valve styles. CPC Check Valve Cartridge  3500 psi (241 bar) working pressure  Flow rates to 50 gpm (189 l/min)  Steel Construction  Three standard spring pressures  Three sizes based on flow Features Designed for hydraulic circuit applications where virtually zero leakage in the check direction is required. The drop-in cartridge design with soft poppet seal of molded nylon is available in three sizes with flow ratings of 10 gpm (38 l/min), 25 gpm (95 l/min), and 50 gpm (189 l/min) respectively. ΔNotes: – Decimal dimensions are +/-.015 in. (.38 mm). – Ratings, specifications, and dimensions are subject to change without notice. – Part configurations are typical and do not necessarily represent actual appearance. – Consult factory for certified cavity drawing. CPC Flow Direction: *Dimensions and Specifications Model A B C D E F G H J K L M N In. 1.204 .248 .500 .629/.625 .250 .390 .745/.750 .437 .030 .300 1.20 .74 .62 mm 30.6 6.3 12.7 16.0/15.9 6.4 9.9 18.9/19.0 11.0 .76 7.6 30.5 18.8 15.7 In. 1.776 .230 .680 .879/.875 .531 .520 1.004/1.000 .500 .025 .400 1.78 .99 .87 mm 45.1 5.8 17.3 22.3/22.2 13.5 13.2 25.5/25.4 12.7 .64 10.2 45.2 25.1 22.1 In. 2.291 .284 1.060 1.316/1.312 .592 .600 1.504/1.500 1.000 .025 .476 2.29 1.49 1.30 mm 58.2 7.2 26.9 33.4/33.3 15.1 15.2 38.2/38.1 25.4 .64 12.1 58.2 37.8 33.0 CPC 10 CPC 25 CPC 50 CPC Series V C CAC and CAV Series L M N G dia. H dia. max VALVE PORT (For in-line flow) J 30° C dia. D dia. CYLINDER PORT VALVE PORT F E dia. K A B – 4 – Note: Gallons shown are in U.S. gallons. *Dimensions shown are for NPTF ported valves; for other end fitting configurations consult factory. CAD Dual Pilot Check Valve  3500 psi (241 bar) 5000 psi (345 bar) intermittently  Flow rates to 50 gpm (189 l/min)  Anodized aluminum blocks, plated steel cartridges  Three standard spring pressures  Three sizes based on flow  Pilot ratio - 4:1 Features The CAD dual pilot check valve features two CAC check cartridges in a single red anodized aluminum housing with standard ports to 1” in NPSF or SAE o-ring sealed. Flow into one of the valve ports is blocked until pressure overcomes the poppet spring. When the poppet is unseated, flow is permitted to the actuator; simultaneously the pilot piston on the actuated side unseats the opposite poppet to permit return flow through the valve. CAD Series Adaptor Torque *Dimensions and Specifications Model A B C D E F G H J K L M N In. 3.96 3.59 2.00 1.25 .63 1.38 1.65 .68 1.00 1.50 1.62 .50 .34 mm 100.6 91.2 50.8 31.8 16.0 35.1 41.9 17.3 25.4 38.1 41.1 12.7 8.6 In. 4.60 3.59 2.00 1.25 .63 1.38 1.65 .68 1.00 1.50 1.62 .50 .34 mm 116.8 91.2 50.8 31.8 16.0 35.1 41.9 17.3 25.4 38.1 41.1 12.7 8.6 In. 5.78 5.21 2.00 1.50 .75 1.25 2.60 .86 1.19 2.15 2.56 .30 .41 mm 146.8 132.3 50.8 38.1 19.0 31.8 66.0 21.8 30.2 54.6 65.0 7.6 10.4 In. 6.33 5.21 2.50 1.50 .75 1.75 2.59 .85 1.38 2.15 2.56 .30 .41 mm 160.8 132.3 63.5 38.1 19.0 44.5 65.8 21.6 35.1 54.6 65.0 7.6 10.4 In. 7.13 6.24 3.00 2.00 1.00 2.00 3.46 .98 1.75 2.75 3.00 .50 .41 mm 181.1 158.5 76.2 50.8 25.4 50.8 87.9 24.9 44.5 69.9 76.2 12.7 10.4 CAD 10 1/4" & 3/8" CAD 10 1/2" CAD 25 3/8", 1/2", 3/4" CAD 25 3/4 SAE CAD 50 B A K H L N M CYLINDER PORT 1 VALVE PORT 1 CYLINDER PORT 2 J G VALVE PORT 2 F C E D CPC Series V C CAC and CAV Series V P C CAD Series V1 C1 V2 C2 CAD 10 = 180 lbf. In.(20.3 N.m) CAD 25 = 480 lbf. In.(54.2 N.m) CAD 50 = 750 lbf. In.(85.0 N.m) – 5 – Note: Gallons shown are in U.S. gallons. †Applies to all Inline Check Valve styles. CAV Single Pilot Check Valve  3500 psi (241 bar), 5000 psi (345 bar) intermittently  Flow rates to 50 gpm (189 l/min)  Anodized aluminum blocks, plated steel cartridges  Three standard spring pressures  Three sizes based on flow  Pilot ratio - 4:1 Features The CAV single pilot check valve contains a standard CAC cartridge in a red anodized aluminum block with NPSF or SAE porting to 1”. Units are available with three standard cracking pressures of 15 psi (1 bar), 25 psi (1.7 bar), or 60 psi (4 bar). CAV 10 = 180 lbf. In.(20.3 N.m) CAV 25 = 480 lbf. In.(54.2 N.m) CAV 50 = 750 lbf. In.(85.0 N.m) Adaptor Torque *Dimensions and Specifications Model A B C D E F G H J K L M IN. 2.77 2.40 2.00 1.25 .63 1.38 .69 1.00 1.50 .65 .50 .34 MM 70.4 61.0 50.8 31.8 16.0 35.1 17.5 25.4 38.1 16.5 12.7 8.6 IN. 3.41 2.40 2.00 1.25 .63 1.38 .69 1.00 1.50 .65 .50 .34 MM 86.6 61.0 50.8 31.8 16.0 35.1 17.5 25.4 38.1 16.5 12.7 8.6 IN. 3.73 3.15 2.00 1.50 .75 1.25 .86 1.19 1.80 1.00 .30 .41 MM 94.7 80.0 50.8 38.1 19.0 31.8 21.8 30.2 45.7 25.4 7.6 10.4 IN. 4.55 3.43 2.50 1.50 .75 1.75 .85 1.38 1.88 1.25 .75 .41 MM 115.6 87.1 63.5 38.1 19.0 44.5 21.6 35.1 47.8 31.8 19.0 10.4 IN. 4.55 3.65 3.00 2.00 1.00 2.00 .96 1.75 2.25 1.00 .50 .41 MM 115.6 92.7 76.2 50.8 25.4 50.8 24.4 44.5 57.2 25.4 12.7 10.4 CAV 10 1/4” & 3/8” CAV 10 1/2” CAV 25 3/8”, 1/2”, 3/4” CAV 25 3/4 SAE CAV 50 B A J G K M L CYLINDER PORT VALVE PORT PILOT PORT ONLY - 1/4" NPSF or 1/4" SAE H F C E D Flow Direction: CPC Series V C CAC and CAV Series V P C CAD Series V1 C1 – 6 – Note: Gallons shown are in U.S. gallons. *Dimensions shown are for NPTF ported valves; for other end fitting configurations consult factory. CAC Pilot Check Valve Cartridge  3500 psi (241 bar) working pressure, 5000 psi (345 bar) intermittently  Flow rates to 50 gpm (189 l/min)  Steel Construction  Three standard spring pressures  Pilot ratio - 4:1  Air Pilot option available Features Designed for use in hydraulic circuits requiring less than 1 DPM leakage. These drop-in cartridge valves lock an actuator or part of a circuit until pilot pressure is applied. Features include durable molded nylon poppet seal, damping port in poppet guide, hardened steel body and poppet. *Dimensions and Specifications CAC 10 CAC 25 CAC 50 Flow Direction: Model A B C D E F G H J K L M N IN. 1.204 .248 .500 .629/.625 .250 .390 .745/.750 .437 .030 .300 1.20 .74 .62 MM 30.6 6.3 12.7 16.0/15.9 6.4 9.9 18.9/19.0 11.0 .76 7.6 30.5 18.8 15.7 IN. 1.776 .230 .680 .879/.875 .531 .520 1.004/1.000 .500 .025 .400 1.78 .99 .87 MM 45.1 5.8 17.3 22.3/22.2 13.5 13.2 25.5/25.4 12.7 .64 10.2 45.2 25.1 22.1 IN. 2.291 .284 1.060 1.316/1.312 .592 .600 1.504/1.500 1.000 .025 .476 2.29 1.49 1.30 MM 58.2 7.2 26.9 33.4/33.3 15.1 15.2 38.2/38.1 25.4 .64 12.1 58.2 37.8 33.0 CPC Series V C CAC and CAV Series V P C CAD Series V1 C1 V2 C2 G dia. H dia. max PILOT PORT J 30° C dia. D dia. CYLINDER PORT VALVE PORT F E dia. K A B L M N CPC/CAC Pressure Drop PRESSURE DROP (bar) PRESSURE DROP (psi) FLOW (l/min) HYDRAULIC OIL AT 38°C, FULLY OPEN FLOW (gpm) HYDRAULIC OIL AT 100°C, FULLY OPEN 120 100 50 40 30 20 10 5 4 3 2 1.0 .5 .4 .3 .2 .2 .3 .4 .5 .6 1.0 2.0 3 4 5 6 7 10 20 30 40 100 6.90 3.45 2.76 2.07 1.38 .69 .35 .28 .21 .14 .07 .034 .028 .021 .014 .76 1.36 1.51 1.89 2.27 3.8 7.6 11.4 15.1 18.9 37.9 75.7 113.5 378.5 10 GPM MODELS 25 GPM MODELS 50 GPM MODELS – 7 – – 8 – Quick Disconnect & Valve Division 201 Titusville Road Union City, Pennsylvania 16438-8699 USA PH: 814-438-3821 FAX: 814-438-3069 e-mail: qd&v_sales@snap-tite.com www.snap-tite.com 01-0052BE-1203 Distributed by: ! WARNING ! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Snap-tite, Inc., its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operation conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Snap-tite, Inc. and its subsidiaries at any time without notice. Ordering Information *3/4” 6C SST working pressure - 5000 psi (345 bar), 1” 6C SST working pressure - 4000 psi (276 bar) Inline Check Valves - 5,000 psi (345 bar) rated Thread Type RP - Female British Parallel BS 2779 P - Female NPSF S - Female SAE Series CPI - Inline Check Valve Poppet Style Inlet F - Female Outlet F - Female Port Size NPSF or BSP 2 - 1/4” 3 - 3/8” 4 - 1/2” 6 - 3/4” 8 - 1” SAE 8 - 1/2” 12 - 3/4” 16 - 1” Spring Pressure 05 - 5 psi (.35 bar) 15 - 15 psi (1 bar) 25 - 25 psi (1.75 bar) 65 - 65 psi (4.50 bar) Seal No letter for Viton (std.) A - Buna E - Ethylene Propylene Size 4 - 1/4” 6 - 3/8” 8 - 1/2” 12 - 3/4” 16 - 1” 20 - 1-1/4” 24 - 1-1/2” 32 - 2” Check Valve 6C - 6,000 psi* (414 bar) operating pressure 3C - 3,000 psi (207 bar) operating pressure Inline Check Valves - Up to 6,000 psi (414 bar) rated• Material No letter Steel Zinc Yellow Dichromate Plated (standard) S - 316 Stainless Steel Inlet M - Male NPT F - Female NPTF EF - Female SAE EM - Male 37° Flare ORS - Male Face Seal RP - Female British Parallel BS 2779 Outlet M - Male NPT F - Female NPTF EF - Female SAE EM - Male SAE 37° Flare ORS - Male Face Seal RP - Female British Parallel BS 2779 Spring Pressure 5 - 5 psi (.35 bar) 25 - 25 psi (1.75 bar) 65 - 65 psi (4.5 bar) Seal No letter for Viton (std.) M - Military variation of Buna N for MIL-H-5606 fluids A - Buna E - Ethylene Propylene Series CAV - Single Pilot Operated Check Valve CAD - Dual Pilot Operated Check Valve CAV 10 - 3P - 15 A Cracking Pressure 15 - 15 psi (1 bar) 25 - 25 psi (1.7 bar) 60 - 60 psi (4 bar) Air Pilot P - O-ring on Pilot Piston [60 psi (4 bar) spring is recommended] Rated Flow 10 - 10 gpm (38 l/min) 1/4”, 3/8”, 1/2” ports 25 - 25 gpm (95 l/min) 3/8”, 1/2”, 3/4” ports 50 - 50 gpm (189 l/min) 3/4”, 1” ports Seal No letter for Viton A - Buna N Port Size NPT 2P - 1/4” 3P - 3/8” 4P - 1/2” 6P - 3/4” 8P - 1” SAE 4S - 1/4” 6S - 3/8” 8S - 1/2” 12S - 3/4” 16S - 1” Series CAC - Poppet Cartridge Pilot Check Valve CPC - Poppet Cartridge Check Valve Cracking Pressure 15 - 15 psi (1 bar) 25 - 25 psi (1.7 bar) 60 - 60 psi (4 bar) Air Pilot* Option P - O-ring on Pilot Piston [60 psi (4 bar) spring is recommended] *CAC only Rated Flow 10 - 10 gpm (38 l/min) 25 - 25 gpm (95 l/min) 50 - 50 gpm (189 l/min) Seal No letter for Viton A - Buna N Current Design - 1 Industrial Estate Whitemill - Wexford Republic of Ireland PH: 353 53 914 1566 FAX: 353 53 914 1582 e-mail: ste_sales@snap-tite.com www.snap-tite.com CPI F F - 4 P - 15 S 6C 4 F - F 5 CAC 10 - 15 - A -1 ISO-9001 Certified Compressed Natural Gas Vehicle Fueling Products AGA/CGA NGV1 CERTIFIED ISO-9001 Certified Snap-tite offers a full line of NGV1 fueling products. “A World Class Tradition of Quality” 2 Snap-tite … Quality, Safety, Ingenuity ounded over 65 years ago, Snap-tite has grown into a corporation producing over 50 product lines in 8 facilities located in the United States and Europe. Starting in the mid 1930’s and continuing through the latest developments, Snap-tite is widely recognized for it’s role in problem solving for the military, aerospace, electronic cooling, mobile equipment, offshore oil and gas, and natural gas appliance industries to name a few. Snap-tite has taken it’s expertise in design and manufacturing to develop products for the compressed natural gas vehicle (NGV) market. Snap-tite’s receptacles and patented nozzles fully comply with and are certified to the ANSI/AGA/CGA NGV1 Standard for Compressed Natural Gas Vehicles (NGV) fueling connection devices. Snap-tite has become the first to offer a range of certified products to the market. The test was performed by Snap-tite (in AGA certified Test Lab) and certified by the American Gas Association (AGA). Snap-tite has been striving for the highest quality standards since our first involvement in the space program in the early fifties. Snap-tite believes in continuous improvement in all aspects of our operation from design and manufacturing to customer service. Through a great deal of dedication and hard work, all of Snap-tite’s divisions have become ISO-9001 Certified. Safety is a prime concern to Snap-tite. Snap-tite has designed a feature into the nozzle that makes it the safest design available. The nozzle cannot be manually disconnected from the receptacle while under internal pressure greater than 350 psi (24 bar). Snap-tite has done extensive testing of numerous designs and demonstrated a very unsafe condition with respect to “kick back” of the nozzle which can cause personal injury when disconnected at internal pressures greater than 350 psi (24 bar). In addition, this can cause a “washout” of the receptacle seal. An operator may not know of this failure and when a nozzle is again connected to the receptacle excessive leakage occurs with the possibility of a fire or explosion. This feature of the Snap-tite nozzle exceeds the requirements of the NGV1 specification and has been assigned a world wide patent. F 3 Features w Lightweight – .96 lbs. (.435 kgs) w The bumper is made of a durable polyurethane to reduce wear and damage to vehicles and to protect the user from the cold temperature of the nozzle w The bumper is designed for rugged use, it protects the front engagement bore and provides a very comfortable grip when connecting or disconnecting w Color coded bumper visually identifies the service pressure – blue for 3,000 psi (207 bar), yellow for 3,600 psi (248 bar) w Connects with single handed operation by pushing together w Disconnects with single handed operation by pulling back on the polyurethane bumper w The Snap-tite patented nozzle cannot be manually disconnected from the receptacle at an internal pressure greater than 350 psi (24 bar) w High reliability ball locking w Poppet valve prevents the inadvertent flow of gas when the nozzle is disconnected w Keying system prevents higher pressure nozzle from connecting onto lower pressure receptacle w Nozzles available in either 316 Stainless Steel w When connected to the receptacle the nozzle body extends over the outside diameter of the receptacle thus providing an excellent length to diameter ratio (L/D) w All materials utilized by Snap-tite guarantee a very weather resistant device considering ambient temperature, solar radiation, humidity, atmospheric toxins and airborne salt Snap-tite’s nozzle is designed specifically for the transfer of compressed natural gas (CNG) to natural gas vehicles. This nozzle can be used for fast fill or time fill in a self depressurizing fueling system or in conjunction with a 3-way valve attached. Snap-tite’s nozzle also allows complete interchangeability to any receptacle con- forming to the NGV1 requirements. 4 Snap-tite NGV1 Fueling Nozzle (Type 2 & 3 Class A & B) Certification: ANSI/AGA/CGA NGV1 Working Pressure: 3000 psi (207 bar) and 3600 psi (248 bar) Burst Pressure: Stainless Steel: 20,000 psi (1379 bar) Temperature Range: –40°F (–40°C) to 185°F (80°C) Weight: .96 lbs. (.435 kgs) Flow Rate: 2090 SCFM (3551 Nm3/hr) Material: 316 Stainless Steel Speed of Fill: 16 seconds to fill a 14.5 US gallon (54.92 liters) container from 0 to 3,000 psi (207 bar) PART NUMBER A B C HEX *NGVC2– P** 2.13 (54.10) 3.51 (90) 1-1/8 (28.60) See Page 16 (How to Order) in (mm) Pressure or material does not effect dimensions. 5 0 200 FLOW OF 3000 PSI N2 (SCFM) 400 600 800 1000 1200 1400 1600 1800 2000 2200 HIGH PRESSURE GAS FLOW PERFORMANCE SNAP-TITE CNG NOZZLE (PART NUMBER NGVC2-P30) MAXIMUM FLOW 2090 SCFM RECEIVER PRESSURE (PSIG) 0 1000 2000 3000 B C A DIA 9/16-18 Snap-tite NGV1 Fueling Receptacle Features w Superior poppet check valve design: a) Polyurethane crimped seal to eliminate erosion and washout b) Non-barrel type poppet to reduce sticking due to contamination and icing between the outside diameter of the valve and the inside diameter of the body bore c) Self-centering capability of the poppet w One-piece receptacle design w High strength 316 Stainless Steel valve stop to provide a positive stop for the valve w Superior flow characteristics w Available in either 316 Stainless Steel Snap-tite’s receptacle is designed for permanent mounting to a natural gas vehicle (CNG). Snap-tite’s receptacle utilizes the NGV1 Profile which allows complete interchangeability to any nozzle conforming to the NGV1 standard. 6 Certification: ANSI/AGA/CGA NGV1 Working Pressure: 3000 psi (207 bar) and 3600 psi (248 bar) Burst Pressure: Stainless Steel: 25,000 psi (1724 bar) Temperature Range: –40°F (–40°C) to 250°F (121°C) Weight: .21 lbs (.095 kgs) Flow Rate: 2090 SCFM (3551 Nm3/hr) Material: 316 Stainless Steel PART NUMBER A B C D FLATS E HEX F HEX NGVN2–P30 .984 (25) 1.78 (45.20) 13/16 (20.60) NGVN2–P36 .945 (24) 1.78 (45.20) 13/16 (20.60) NGVN3–P30 .984 (25) 1.78 (45.20) 3.40 (86.40) 13/16 (20.60) 11/16 (17.50) 9/16 (14.30) NGVN3–P36 .945 (24) 1.78 (45.20) 3.40 (86.40) 13/16 (20.60) 11/16 (17.50) 9/16 (14.30) NGVN4–P30 .984 (25) 1.78 (45.20) 3.53 (89.70) 13/16 (20.60) 3/4 (19.10) 11/16 (17.50) NGVN4–P36 .945 (24) 1.78 (45.20) 3.53 (89.70) 13/16 (20.60) 3/4 (19.10) 11/16 (17.50) See Page 16 (How to Order) in (mm) 7 D A DIA E F B C Snap-tite NGV1 Profile High Flow Receptacle Features w Heavy duty construction w Superior poppet check valve design prevents gas flow when the nozzle is disconnected w Leak free regardless of temperature and pressure w Connects to any NGV1 compliant nozzle w Quick and efficient performance w Excellent flow characteristics w Polyurethane crimped seal eliminates erosion and washout Snap-tite’s high flow receptacles are designed for permanent mounting to heavy duty natural gas vehicles (CNG). Snap-tite’s high flow receptacle utilizes the NGV1 profile which allows complete interchangeability to any nozzle conforming to the NGV1 standard. 8 Working Pressure: 3000 psi (207 bar) and 3600 psi (248 bar) Burst Pressure: 25,000 psi (1724 bar) Temperature Range: –40°F (–40°C) to 250°F (121°C) Weight: .70 lbs. (.32 kgs) Flow Rate: 3200 SCFM (5400 Nm3/hr) Material: 316 Stainless Steel 9 PART NUMBER A B C D HNGVN5–P30 .984 (25) 1.69 (43) 2.88 (73.2) 3.38 (85.9) HNGVN5–P36 .945 (24) 1.69 (43) 2.88 (73.2) 3.38 (85.9) See Page 16 (How to Order) in (mm) FLOW OF 3600 PSI N2 (SCFM) 3500 RECEIVER PRESSURE (PSIG) 3000 2500 2000 1500 1000 500 0 100 600 1100 1600 2100 2600 3100 HIGH PRESSURE GAS FLOW PERFORMANCE SNAP-TITE HIGH FLOW CNG RECEPTACLE MAXIMUM FLOW 3200 SCFM A B C D O 1.50 ACROSS CORNERS 1-3/8 HEX / 5/8" SAE PER SAE J514 Snap-tite’s inline breakaway is designed specifically for compressed natural g as fueling systems. When properly installed, this inline breakaway allows for the safe disconnection from the fueling system without damage to the dispenser in the event of an accidental disconnect (drive-off). The inline breakaway was designed to replace the traditional tripod leverage towers used in conjunction with the ISO B style coupling as the breakaway connection for the fueling hose from the dispenser. Compressed Natural Gas (CNG) Inline Hose Breakaway Features w Corrosive resistant stainless steel (303 & 316) construction w Nipple is equipped with durable polyethylene bumper to protect the nipple form in the event of a breakaway w Disconnect force: 60-140 lbs. (266.9 – 622.7 N) at any pressure up to operating w Superior flow characteristics w Compact envelope w Balanced design assures positive connection until a breakaway cycle is required w Lightweight design - .95 lbs. (.431 kgs) w Easy installation w Reusable following breakaway with minimal repair 10 Working Pressure: 3600 psi (248 bar) Burst Pressure: 20,000 psi (1379 bar) Temperature Range: –40°F (–40°C) to 150°F (66°C) Weight: .95 lbs (.431 kgs) Flow Rate: 2090 SCFM (3551 Nm3/hr) Material: 303 & 316 Stainless Steel 11 *NGVBCN2-P50NR 2.79 (70.87) 1.38 (35.05) 2.28 (57.91) 1.53 (38.86) 1.34 (34.04) *NGVBCN2-P50 2.79 (70.87) 1.38 (35.05) 2.28 (57.91) 1.53 (38.86) 1.34 (34.04) PART NUMBER A B C D E Nipple type is determined by customer’s system. If system has a separate vent line, use part number NGVBCN2-P50NR (non-relieving). If system vents back through supply hose, use part number NGVBCN2-P50. Above part numbers will provide a complete unit consisting of one coupler and one nipple. in (mm) A ENGAGEMENT FLOW NGVBC2-P50 3600 PSI 9718 B C E D NGVBC2-P50 9718 0 200 FLOW OF 3000 PSI N2 (SCFM) 400 600 800 1000 1200 1400 1600 1800 2000 2200 HIGH PRESSURE GAS FLOW PERFORMANCE SNAP-TITE CNG INLINE BREAKAWAY MAXIMUM FLOW 2090 SCFM RECEIVER PRESSURE (PSIG) 0 1000 2000 3000 Features w Superior poppet check valve design: a) Polyurethane crimped seal to eliminate erosion and washout b) Non-barrel type poppet to reduce sticking due to contamination and icing between the outside diameter of the valve and the inside diameter of the body bore c) Self-centering capability of the poppet w One-piece body design w High strength 316 Stainless Steel valve stop to provide a positive stop for the valve w Superior flow characteristics w 316 Stainless Steel construction Snap-tite’s Check Valve is designed specifically for zero leakage control of compressed natural gas (CNG). Free flow in one direction and blocked flow in the reverse. This Check Valve utilizes the same internal construction and parts as the Snap-tite NGV1 Receptacle. Snap-tite Compressed Natural Gas (CNG) Check Valves 12 Certification: AGA 7-93 Working Pressure: 3600 psi (248 bar) Burst Pressure: 25,000 psi (1724 bar) Temperature Range: –40°F (–40°C) to 250°F (121°C) Weight: .235 lbs (0.107 kgs) Flow Rate: 2090 SCFM (3551 Nm3/hr) Material: 316 Stainless Steel PART NUMBER A B C D FLATS E F NGCV6EF–EF 2.14 (54.40) .86 (21.80) 3/4 (19.10) NGCV4A–4A 2.14 (54.40) 4.14 (105.20) .86 (21.80) 3/4 (19.10) NGCV6A–6A 2.14 (54.40) 4.29 (108.10) .86 (21.80) 3/4 (19.10) NGCV6EF–4A 2.14 (54.40) .86 (21.80) 3/4 (19.10) 3.14 (79.80) NGCV6EF–6A 2.14 (54.40) .86 (21.80) 3/4 (19.10) 3.22 (81.80) NGCV6MOS–EF 2.14 (54.40) .86 (21.80) 3/4 (19.10) 2.81 (71.40) See Page 16 (How to Order) in (mm) 13 C DIA OUTLET D E A INLET F B Features w Corrosive resistant stainless steel (303) construction w Meets or exceeds ISO-7241-1 Series B w Superior poppet valve design: a) Polyurethane crimped seal to eliminate erosion and washout b) Self-centering capability of the poppet w Superior flow characteristics w Proven ball-lock design Snap-tite’s 72 Series may be used in a breakaway harness for compressed natural gas (CNG) fueling systems due to the “superior poppet sealing” designed specifically for compressed natural gas. These couplings feature superior pressure and flow characteristics over other manufacturers while meeting or exceeding the ISO-7241-1 Series B specifications. 14 Compressed Natural Gas (CNG) Coupling Certification: Texas Railroad Commission Temperature Range: –40°F (–40°C) to 250°F (121°C) Material: 303 Stainless Steel 1/4 2.25 (57.15) .88 (22.35) 1.12 (28.45) .75 (19.05) 1.51 (38.35) .95 (24.13) .75 (19.05) .83 (21.08) 3/8 2.57 (65.28) 1.13 (28.70) 1.37 (34.80) 1.00 (25.40) 1.74 (44.20) 1.13 (28.70) .88 (22.35) .96 (24.38) SIZE A B C D E F G H in (mm) E F-ENGAGEMENT G HEX H DIA ACROSS CORNERS 72N*-*F C .03 DIA B DIA D FLATS 72C*-*F A INC. 15 S72C4–4F UR COUPLER 1/4 NPTF 5500 PSI (379 BAR) 22,000 PSI (1517 BAR) S72N4–4F UR NIPPLE 1/4 NPTF 5500 PSI (379 BAR) 22,000 PSI (1517 BAR) S72C6–6F UR COUPLER 3/8 NPTF 3750 PSI (259 BAR) 15,000 PSI (1035 BAR) S72N6–6F UR NIPPLE 3/8 NPTF 3750 PSI (259 BAR) 15,000 PSI (1035 BAR) PART NUMBER COUPLING HALF END FITTING WORKING PRESSURE BURST PRESSURE 1000 2000 3000 0 0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 3200 3400 FLOW OF 3000 PSI N2 (SCFM) RECEIVER PRESSURE (PSIG) 3/8” 72 Series 1/4” 72 Series MATERIAL SERIES COUPLING HALF END FITTING WORKING PRESSURE Nozzles and Receptacles** PART NUMBER B NGV N 2- P30 PART NUMBER DESCRIPTION Natural Gas Check Valves** PART NUMBER NGCV 6EF- 6EF NGVNC RECEPTACLE DUST CAP NGVND STORAGE RECEPTACLE DUMMY Accessories **Consult factory for: Additional end fitting requirements or filter requirements How to Order SERIES INLET END FITTING OUTLET END FITTING NGCV 6EF – 3/8 FEMALE SAE (9/16 - 18) 6EF – 3/8 FEMALE SAE (9/16 - 18) 6MOS – 3/8 MALE O-RING SEAL (9/16 - 18) 6MOS – 3/8 MALE O-RING SEAL (9/16 - 18) 4A – 1/4 TUBE DOUBLE FERRULE 4A – 1/4 TUBE DOUBLE FERRULE 6A – 3/8 TUBE DOUBLE FERRULE 6A – 3/8 TUBE DOUBLE FERRULE ! WARNING ! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND/OR PROPERTY DAMAGE. This document and other information from Snap-tite, Inc., its subsidiaries and authorized distributors, provides product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operation conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Snap-tite, Inc. and its subsidiaries at any time without notice. DISTRIBUTED BY: ISO-9001 Certified Quick Disconnect & Valve Division 201 Titusville Road Union City, Pennsylvania 16438-8699 USA PH: 814-438-3821 FAX: 814-438-3069 e-mail: qd&v_sales@snap-tite.com www.snap-tite.com Industrial Estate Whitemill - Wexford Republic of Ireland PH: 353 53 914 1566 FAX: 353 53 914 1582 e-mail: ste_sales@snap-tite.com www.snap-tite.com *Available option for 316 stainless steel receptacle only. 16 01-0024BE-1203 NO LETTER – 316 NGV C – NOZZLE 2 – 3/8 FEMALE SAE (9/16 - 18) P30 – 3000 PSI STAINLESS STEEL N – RECEPTACLE 3 – 1/4 TUBE DOUBLE FERRULE BULKHEAD (207 BAR) 4 – 3/8 TUBE DOUBLE FERRULE BULKHEAD P36 – 3600 PSI 5* – 5/8 MALE 0-RING SEAL (7/8-14) (248 BAR) H* HIGH FLOW MULTI-COUPLING PANEL FOR ALL INDUSTRIES Automotive - Machine Tool Plastic - Offshore - Petro Chemical Aircraft Engine Test - Medical – 2 – Features: • Balanced dry-break • Designed to minimize end thrust under system pressure; permits the use of lighter weight plates • Connectable under static pressure to 250 psi (17 bar) • Low separation forces • Eliminates the necessity of expensive locking mechanisms • Virtually zero spillage and air inclusion • Unique flush face valve design prevents sediment build-up in sub-sea applications • Wide range of seal materials to handle any application Pressures: To 10,000 psig (690 bar) Sizes: 3/8", 1/2" and 3/4" Material: Stainless steel Shut-off Combination: Double shut-off Features: • State-of-the art dry-break design • Lightweight and compact design • Spillage and air inclusion are held to a minimum • Designed for high purity, high reliability systems • Designed for high flow vs. low pressure drop • Performance meets or exceeds MIL-C-7413B and MIL-C-25427A • Wide range of seal materials to handle any application Pressures: To 1,000 psig (69 bar) Sizes: 1/4" through 2" Materials: Aluminum and stainless steel Shut-off Combinations: Double shut-off BN SERIES COUPLINGS LN SERIES 3.8 7.6 11 15 19 23 27 30 34 38 76 113 151 189 227 265 302 340 378 6.9 6.2 5.5 4.8 4.1 3.4 2.7 2.1 1.4 .69 .62 .55 .48 .41 .34 .27 .21 .14 .07 100 90 80 70 60 50 40 30 20 10 9 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8 9 10 20 30 40 50 60 70 80 90 100 FLOW (GPM) – (WATER) PRESSURE LOSS (PSI) PRESSURE LOSS (BAR) FLOW (LPM) – (WATER) 3/8" Cv=1.6 1/2" Cv=2.1 3/4" Cv=4.4 BN 3.8 7.6 11 15 19 23 27 30 34 38 76 113 151 189 227 265 302 340 378 757 1135 6.9 6.2 5.5 4.8 4.1 3.4 2.7 2.1 1.4 .69 .62 .55 .48 .41 .34 .27 .21 .14 .07 300 200 100 90 80 70 60 50 40 30 20 10 9 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8 9 10 20 30 40 50 60 70 80 90 100 FLOW (GPM) – (WATER) PRESSURE LOSS (PSI) PRESSURE LOSS (BAR) FLOW (LPM) – (WATER) 1/4" Cv=.6 3/8" Cv=2.5 1/2" Cv=4 5/8" Cv=5 3/4" Cv=8 1" Cv=16 1-1/4" Cv=28 1-1/2" Cv=52 2" Cv=88 LN – 3 – Features: • Dry-break design • High pressure capability • Virtually zero spillage and air inclusion • Heavy duty construction withstands high impulses and shocks • Superior flow characteristics with low pressure drop Pressures: To 10,000 psig (690 bar) Sizes: 1/8" through 2" Materials: Steel with platings or coatings to customer specifications and stainless steel to meet your pressure and environmental requirements Shut-off Combination: Double shut-off Features: • Economical medium-pressure poppet design • Two-piece construction for end fitting versatility • Anti-extrusion seal • Multitude of seals and materials to handle gases, fluids and vacuums in a wide range of pressures and temperatures • Streamline valve design for high flow with minimal pressure drop • Seal and poppet design are wear and pressure compensated for positive shut-off with zero leakage Pressures: To 3,000 psig (207 bar) (For higher pressure consult factory) Sizes: 1/4" through 4" (larger sizes are available) Materials: Steel with platings or coatings to customer specifications and stainless steel to meet your pressure and environmental requirements Shut-off Combination: Double shut-off/Single shut-off HN-3 SERIES MP-1 SERIES .38 .76 1.1 1.5 1.9 2.3 2.7 3.0 3.4 3.8 7.6 11 15 19 23 27 30 34 38 76 113 151 189 227 265 302 340 378 757 1135 13.8 6.9 6.2 5.5 4.8 4.1 3.4 2.7 2.1 1.4 .69 .62 .55 .48 .41 .34 .27 .21 .14 .07 300 200 100 90 80 70 60 50 40 30 20 10 9 8 7 6 5 4 3 2 1 .9 .8 .7 .6 .5 .4 .3 .2 .1 1 2 3 4 5 6 7 8 9 10 20 30 40 50 60 70 80 90 100 200 FLOW (LPM) – (WATER) FLOW (GPM) – (WATER) PRESSURE LOSS (BAR) PRESSURE LOSS (PSI) 1/4" Cv=.73 3/8" Cv=1.8 1/2" Cv=3.1 3/4" Cv=6.6 1" and 1-1/4" Cv=12.4 1-1/2" and 2" Cv=33 1/8" Cv=.07 HN COUPLINGS 3.8 7.6 11 15 19 23 27 30 34 38 76 113 151 189 227 265 302 340 378 757 1135 200 FLOW (LPM) – (WATER) 1514 1892 2271 2649 3028 3406 3785 6.9 6.2 5.5 4.8 4.1 3.4 2.7 2.1 1.4 .69 .62 .55 .48 .41 .34 .27 .21 .14 .07 PRESSURE LOSS (BAR) 13.8 40 30 20 10 9 8 7 6 5 4 3 2 1 1 FLOW (GPM) – (WATER) 50 60 70 80 90 100 200 300 400 500 600 700 800 900 1000 100 90 80 70 60 50 40 30 20 10 9 8 76 5 4 3 2 PRESSURE LOSS (PSI) 1/4" Cv=.74 3/8" Cv=.96 1/2" Cv=2.6 3/4" Cv=4.8 1" Cv=7.2 1-1/4" Cv=10.8 1-1/2" Cv=14.7 2" Cv=37 MP – 4 – Features: • Plain slip-joint design • For transfer of large volumes of liquids or gases where integral shut-off valves are not required • Wide range of elastomeric seals are available including