Water & Beverage Connectors Products & Custom Solutions Parker Hannifin Corporation Fluid System Connectors Otsego, Michigan D 1 PRODUCT CATEGORY CONNECTION TECHNOLOGY BODY MATERIAL SEAL MATERIAL WORKING PRESSURE AT 73° (PSI) (1/4 BURST PRESSURE) TEMPERATURE RANGE (F) 1/4″ 5/16″ 3/8″ 1/2″ LIQUIfit Fractional Inch Gripping Ring Push Button Release Engineered High-Performance Nylon EPDM 230† 230† 190† 160† +35° to +200° LIQUIfit Metric Gripping Ring Push Button Release Engineered High-Performance Nylon EPDM 4MM 6MM 8MM 10MM 12MM +35° to +200° 230† 230† 230† 190† 160† TrueSeal Collet Push Button Release Acetal EPDM 300† 300† 300† 250† -20° to +180° Polypropylene EPDM 150† N/A 150† 150† 0° to +225° Kynar Fluorocarbon 300† N/A 300† N/A 0° to +275° Fast & Tite Gripping Ring Compression Polypropylene Nitrile 300† 300† 250† 200† 0° to +212° Nylon Nitrile 300† 300† 250† 200† -40° to +200° Par-Barb Barb Polypropylene None 125† 125† 125† 125† -65° to +190° Nylon None 125† 125† 125† 125† -40° to +200° Quick Couplings Quick Disconnect Acetal Nitrile 120† 120† 120† N/A -40° to +180° TrueSeal Ball Valves Collet Push Button Release Polypropylene EPDM 150† 150† 150† 150† 0° to +225° LIQUIfit Ball Valves Gripping Ring Push Button Release Polypropylene EPDM 150† 150† 150† 150† +35° to +200° TrueSeal Check Valves Collet Push Button Release Acetal EPDM 150† 150† 150† 150† +34° to +150° Unleaded Brass Push Button Release Unleaded Brass EPDM † † † † 0° to +200° LIQUIfit Tubing Polyethylene N/A 120† 145† 125† 90† -80° to +150° † Working pressure varies with application and temperature. Product specifications vary with fitting configurations. WARNING – User Responsibility FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. • This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise. • The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors. • To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems. Product Specifications Parker Hannifin Corporation Fluid System Connectors Otsego, Michigan 2 NEW! NEW! Index Fittings, Push-to-Connect pg 3 LIQUIfit™ Fittings, Push-to-Connect pg 9 TrueSeal™ Fittings, Compression pg 13 Fast & Tite™ Fittings, Quick Disconnection pg 21 Quick Couplings Valves, Push-to-Connect pg 23 Ball Valves Fittings, Push-to-Connect pg 26 Low-lead Brass Fittings, Barb pg 16 Par-Barb Cartridges, Clips & Tube Supports pg 27 Accessories Tubing pg 28 Polyethylene Valves, Push-to-Connect pg 25 Check Valves Parker Hannifin Corporation Fluid System Connectors Otsego, Michigan 3 6505 – Male Connector Fractional Inch Tube-to-NPTF PART NUMBER NOM TUBE O.D. NPTF THREAD SIZE F1 IN F2 IN H IN 6505 56 11WP2 1/4 1/8 1/2 5/32 .67 6505 56 14WP2 1/4 1/4 9/16 5/32 .67 6505 56 18WP2 1/4 3/8 3/4 1/4 .85 6505 60 11WP2 3/8 1/8 3/4 5/32 .87 6505 60 14WP2 3/8 1/4 3/4 1/4 .87 6505 60 18WP2 3/8 3/8 3/4 1/4 .87 6505 60 22WP2 3/8 1/2 15/16 1/4 1.06 6505 62 18WP2 1/2 3/8 15/16 3/8 1.10 6505 62 22WP2 1/2 1/2 15/16 3/8 1.10 Metric Tube-to-BSPT PART NUMBER NOM TUBE O.D. BSPT THREAD SIZE F1 MM F2 MM H MM 6505 04 10WP2 4 R1/8 11 3 18 6505 04 13WP2 4 R1/4 14 3 18 6505 06 10WP2 6 R1/8 11 4 18 6505 06 13WP2 6 R1/4 14 4 18 6505 08 10WP2 8 R1/8 17 6 20 6505 08 13WP2 8 R1/4 17 6 20 6505 08 17WP2 8 R3/8 17 6 20 6505 10 13WP2 10 R1/4 17 7 21.5 6505 10 17WP2 10 R3/8 19 7 21.5 6505 10 21WP2 10 R1/2 22 7 21.5 6505 12 17WP2 12 R3/8 19 9 24.5 6505 12 21WP2 12 R1/2 22 9 24.5 6315 – Female Connector Fractional Inch Tube-to-NPTF PART NUMBER NOM TUBE O.D. NPTF THREAD SIZE E IN F IN H IN 6315 56 14WP2 1/4 1/4 14 11/16 1.18 6315 60 18WP2 3/8 3/8 14 3/16 1.42 Metric Tube-to-BSPT PART NUMBER NOM TUBE O.D. BSPT THREAD SIZE E MM F MM H MM 6315 06 10WP2 6 R1/8 11 13 32 6315 06 13WP2 6 R1/4 14 16 33 6315 08 13WP2 8 R1/4 14 16 33.5 6315 08 17WP2 8 R3/8 14 20 36 6325/6353 – Faucet Connector Fractional Inch Tube-to-UNS PART NUMBER NOM TUBE O.D. UNS THREAD SIZE E IN F IN H IN 6325 56 133WP2 1/4 7/16-24 27 9/16 1.22 6325 60 133WP2 3/8 7/16-24 27 9/16 1.26 Metric Tube-to-BSPP PART NUMBER NOM TUBE O.D. BSPP THREAD SIZE E MM F MM H MM 6353 10 21WP2 10 27 9/16 ØD F1 F2 H C F H ØD C E F H E ØD C release button full stainless gripping ring EPDM D seal engineered polymer • EPDM D seal secures connection with a larger surface area than standard O-rings • Engineered polymer allows superior mechanical strength and chemical resistance • Full stainless gripping ring eliminates the need for locking clips • Release button protects and supports tubing • Bio-based body utilizes renewable resources • FDA compliant LIQUIfit™ Push-to-Connect Fittings – NSF 51 – – C HOT – 6505 56 11 W P2 type of fitting Tube OD1 Tube OD2 color code package type Parker Hannifin Corporation Fluid System Connectors Otsego, Michigan LIQUIfit Fittings 4 6316 – Bulkhead Union Fractional Inch Tube-to-Tube PART NUMBER NOM TUBE O.D. F IN K MAX IN L1 IN L2 IN T MIN IN 6316 04 00WP2 5/32 .51 .22 .41 .61 .41 6316 56 00WP2 1/4 .59 .33 .39 .79 .49 6316 08 00WP2 5/16 .71 .57 .41 1.06 .61 6316 60 00WP2 3/8 .87 .57 .49 1.16 .73 6316 62 00WP2 1/2 1.41 .81 .67 1.59 1.00 Metric Tube-to-Tube PART NUMBER NOM TUBE O.D. F MM K MAX MM L1 MM L2 MM T MIN MM 6316 04 00WP2 4 13 5.5 10.5 15.5 10.5 6316 06 00WP2 6 15 8.5 10 20 12.5 6316 08 00WP2 8 18 14.5 10.5 27 15.5 6316 10 00WP2 10 22 14.5 13 30 18.5 6316 12 00WP2 12 26 18.5 15.5 35 22.5 6579 – Fixed Elbow Fractional Inch Tube-to-NPTF PART NUMBER NOM TUBE O.D. NPTF THREAD SIZE F IN G IN H IN L IN 6579 56 11WP2 1/4 1/8 3/8 .43 .87 .71 6579 56 14WP2 1/4 1/4 3/8 .43 1.03 .71 6579 56 18WP2 1/4 3/8 3/8 .43 1.04 .71 6579 60 14WP2 3/8 1/4 1/2 .63 1.26 1.02 6579 60 18WP2 3/8 3/8 1/2 .63 1.26 1.02 Metric Tube-to-BSPT PART NUMBER NOM TUBE O.D. NPTF THREAD SIZE F IN G IN H IN L IN 6579 06 10WP2 6 R1/8 10 11 14 19 6579 06 13WP2 6 R1/4 10 11 14 19 6579 06 17WP2 6 R3/8 10 11 14 19 ØD ØG H F L C Disconnect First, depress the manual release button, then pull the tubing out of the fitting. Connect Simply push the tubing until it bottoms out. Holding and sealing is accomplished instantaneously. 6306 – Union Connector Fractional Inch Tube-to-Tube (Equal) PART NUMBER TUBE O.D. G IN L IN 6306 56 00WP2 1/4 .43 1.18 6306 08 00WP2 5/16 .53 1.46 6306 60 00WP2 3/8 .63 1.65 6306 62 00WP2 1/2 .87 2.24 Metric Tube-to-Tube (Equal) PART NUMBER TUBE O.D. G1 MM G2 MM L MM 6306 04 00WP2 4 8.5 8.5 26.5 6306 06 00WP2 6 10.5 10.5 30 6306 08 00WP2 8 13.5 13.5 37 6306 10 00WP2 10 16 16 42 6306 12 00WP2 12 19 19 50.5 Fractional Inch Tube-to-Tube (Unequal) PART NUMBER TUBE O.D. 1 TUBE O.D. 2 G IN L IN 6306 56 60WP2 1/4 3/8 .63 1.61 6306 08 56WP2 1/4 5/16 .53 1.46 6306 08 60WP2 5/16 3/8 .63 1.65 6306 08 62WP2 5/16 1/2 .87 2.16 6306 60 62WP2 3/8 1/2 .87 2.20 Metric Tube-to-Tube (Unequal) PART NUMBER TUBE O.D. 1 TUBE O.D. 2 G1 MM G2 MM L MM 6306 04 06WP2 4 6 8.5 10.5 29 6306 04 08WP2 4 8 13.5 13.5 37 6306 06 08WP2 6 8 13.5 13.5 37 6306 06 10WP2 6 10 16 16 42 6306 08 10WP2 8 10 16 16 42 6306 08 12WP2 8 12 19 19 50 6306 10 12WP2 10 12 19 19 50 L ØD ØG1 ØG2 ØD2 ØD 1 6307 – Cross Metric Tube-to-Tube PART NUMBER TUBE O.D. H MM L MM T MM 6307 06 00WP2 6 46 22.5 4.2 6307 08 00WP2 8 46 22.5 4.2 H L Ø T Ø G Ø D Ø D Ø D Ø D Parker Hannifin Corporation Fluid System Connectors Otsego, Michigan LIQUIfit Fittings 5 6340 – Union Y Connector Fractional Inch Tube-to-Tube PART NUMBER NOM TUBE O.D. H IN K IN L IN N IN 6340 04 00WP2 5/32 .69 .33 1.18 .35 6340 56 00WP2 1/4 .87 .43 1.42 .45 6340 08 00WP2 5/16 1.10 .53 1.75 .57 6340 60 00WP2 3/8 1.30 .63 2.08 .67 6340 62 00WP2 1/2 1.77 .87 2.64 .91 Metric Tube-to-Tube PART NUMBER NOM TUBE O.D. H MM K MM L MM N MM 6340 04 00WP2 4 17.5 8.5 30 9 6340 06 00WP2 6 21.5 10.5 36.5 11 6340 08 00WP2 8 28 13.5 44.5 14.5 6340 10 00WP2 10 33 16 53 17 6340 12 00WP2 12 39 19 60.5 20 6304 – Union Tee Fractional Inch Tube-to-Tube (Equal) PART NUMBER TUBE O.D. G IN H IN L2 IN 6304 04 00WP2 5/32 .33 .79 .61 6304 56 00WP2 1/4 .43 .94 .71 6304 08 00WP2 5/16 .53 1.14 .89 6304 60 00WP2 3/8 .63 1.34 1.02 6304 62 00WP2 1/2 .87 1.85 1.42 Metric Tube-to-Tube (Equal) PART NUMBER TUBE O.D. G MM H MM L2 MM 6304 04 00WP2 4 8.5 20 15.5 6304 06 00WP2 6 10.5 23 18 6304 08 00WP2 8 13.5 29 22.5 6304 10 00WP2 10 16 34.5 26.5 6304 12 00WP2 12 19 40 31 Fractional Inch Tube-to-Tube (Unequal) PART NUMBER TUBE O.D. 1 TUBE O.D. 2 G IN L IN L2 IN 6304 60 56WP2 3/8 1/4 .63 1.34 1.02 6304 62 60WP2 1/2 3/8 .87 1.85 1.42 ØG ØD ØD ØD H L2 L2 O.D.2 6388 – Plug-in Tee Fractional Inch Tube-to-Stem PART NUMBER TUBE O.D. 1 STEM O.D. 2 G IN H IN H1 IN H2 IN L2 IN 6388 56 00WP2 1/4 1/4 .43 1.20 .43 .79 .71 6388 08 00WP2 5/16 5/16 .53 1.32 .31 .85 .90 6388 60 00WP2 3/8 3/8 .63 1.65 .49 .98 .98 6388 62 00WP2 1/2 1/2 .87 2.01 .51 1.14 1.26 Metric Tube to Tube-to-Stem PART NUMBER TUBE O.D. 1 STEM O.D. 2 G MM H MM H1 MM H2 MM L2 MM 6388 04 00WP2 4 4 8.5 25 6 15.5 15 6388 06 00WP2 6 6 10.5 28.5 7 17 16 6388 08 00WP2 8 8 13.5 33.5 8 21.5 23 6388 10 00WP2 10 10 16 41 9.5 24.5 26.5 6302 – Union Elbow Fractional Inch Tube-to-Tube (Equal) PART NUMBER TUBE O.D. G IN L IN 6302 04 00WP2 5/32 .33 .75 6302 56 00WP2 1/4 .43 .94 6302 08 00WP2 5/16 .53 1.16 6302 60 00WP2 3/8 .63 1.34 6302 62 00WP2 1/2 .87 1.83 Metric Tube-to-Tube (Equal) PART NUMBER TUBE O.D. G MM L MM 6302 04 00WP2 4 8.5 19.5 6302 06 00WP2 6 10.5 24 6302 08 00WP2 8 13.5 29.5 6302 10 00WP2 10 16 34.5 6302 12 00WP2 12 19 40.5 Fractional Inch Tube-to-Tube (Unequal) PART NUMBER TUBE O.D. 1 TUBE O.D. 2 G IN L IN 6302 56 08WP2 1/4 5/16 .53 1.16 6302 08 60WP2 5/16 3/8 .63 1.34 6302 56 60WP2 1/4 3/8 .63 1.30 6302 60 62WP2 3/8 1/2 .87 1.83 Metric Tube-to-Tube (Unequal) PART NUMBER TUBE O.D. 1 TUBE O.D. 2 G MM L MM 6302 04 06WP2 4 6 10.5 24 6302 06 08WP2 6 8 13.5 29.5 6302 08 10WP2 8 10 16 34.5 6302 10 12WP2 10 12 19 40.5 Parker Hannifin Corporation Fluid System Connectors Otsego, Michigan LIQUIfit Fittings 6 6366 – Reducer Fractional Inch Tube-to-Stem PART NUMBER TUBE O.D. 1 STEM O.D. 2 G IN L IN L1 IN 6366 56 08WP2 1/4 5/16 .43 1.61 .89 6366 56 60WP2 1/4 3/8 .43 1.61 .81 6366 08 60WP2 5/16 3/8 .53 1.91 1.14 6366 08 62WP2 5/16 1/2 .63 1.91 .87 6366 60 62WP2 3/8 1/2 .63 2.01 1.18 Metric Tube-to-Stem PART NUMBER TUBE O.D. 1 STEM O.D. 2 G MM L MM L1 MM 6366 04 06WP2 4 6 8.5 38 23.5 6366 04 08WP2 4 8 8.5 38 19 6366 06 08WP2 6 8 10.5 38 20 6366 06 10WP2 6 10 10.5 39 17.5 6366 08 10WP2 8 10 13.5 48.5 28.5 6366 08 12WP2 8 12 13.5 48.5 24.5 6366 10 12WP2 10 12 16 52 33.5 6366 10 14WP2 10 14 16 53 33.5 6366 12 14WP2 12 14 19 55.5 33.5 L L1 ØD2 ØG ØD1 6382 – Plug-in Elbow Fractional Inch Tube-to-Stem (Equal) PART NUMBER TUBE O.D. 1 STEM O.D. 2 G IN H IN H1 IN H2 IN L IN 6382 56 00WP2 1/4 1/4 .43 1.20 .43 .71 .71 6382 08 00WP2 5/16 5/16 .53 1.32 .31 .85 .88 6382 60 00WP2 3/8 3/8 .63 1.53 .35 .96 1.04 6382 62 00WP2 1/2 1/2 .87 1.93 .51 1.12 1.42 Metric Tube-to-Stem (Equal) PART NUMBER TUBE O.D. 1 STEM O.D. 2 G MM H MM H1 MM H2 MM L MM 6382 04 00WP2 4 4 8.5 23 6 15.5 15 6382 06 00WP2 6 6 10.5 26.5 7 17 17 6382 08 00WP2 8 8 13.5 33 8 21.5 22.5 6382 10 00WP2 10 10 16 39 9.5 24.5 26.5 6382 12 00WP2 12 12 19 44.5 10 27 31 Fractional Inch Tube-to-Stem (Unequal) PART NUMBER TUBE O.D. 1 STEM O.D. 2 G IN H IN H1 IN H2 IN L IN 6382 56 60WP2 1/4 3/8 .63 1.53 .35 .96 1.04 6382 60 56WP2 3/8 1/4 .63 1.26 .43 .71 1.04 Metric Tube-to-Stem (Unequal) PART NUMBER TUBE O.D. 1 STEM O.D. 2 G MM H MM H1 MM H2 MM L MM 6382 04 06WP2 4 6 10.5 26.5 7 17 16.5 6382 06 04WP2 6 4 10.5 25 7 15.5 17 6382 06 08WP2 6 8 13.5 33.5 8 21.5 22.5 6382 08 10WP2 8 10 16 39 9.5 24.5 26 6382 10 12WP2 10 12 19 44.5 10 27 30 H2 H1 H ØD2 ØD1 L ØG 6383 – Plug-in Run Tee Fractional Inch Tube-to-Stem PART NUMBER TUBE O.D. 1 STEM O.D. 2 G IN H IN H1 IN H2 IN L IN 6383 56 00WP2 1/4 1/4 .43 1.20 .43 .71 .71 6383 60 00WP2 3/8 3/8 .63 1.55 .43 .96 1.04 6383 62 00WP2 1/2 1/2 .87 1.93 .71 1.12 1.42 Metric Tube-to-Stem PART NUMBER TUBE O.D. 1 STEM O.D. 2 G MM H MM H1 MM H2 MM L MM 6383 04 00WP2 4 4 8.5 33 6 15.5 15 6383 06 00WP2 6 6 10.5 38.5 7 17 18 6383 08 00WP2 8 8 13.5 49 8 21.5 23 6383 10 00WP2 10 10 16 57 10.5 25.5 26.5 ØD1 L H1 H ØD2 H2 ØG 6380 – Plug-in 45° Elbow Metric Tube-to-Stem PART NUMBER TUBE O.D. STEM O.D. H H1 H2 6380 04 00WP2 4 4 33.5 19.0 13 6380 06 00WP2 6 6 39.0 21.0 14.5 6380 08 00WP2 8 8 44.0 21.5 19.5 6380 10 00WP2 10 10 53.0 27.0 23 6380 12 00WP2 12 12 58.5 27.5 26.5 H1 H2 H ØD1 ØD2 L ØG Parker Hannifin Corporation Fluid System Connectors Otsego, Michigan LIQUIfit Fittings 7 6503 – Swivel Run Tee Fractional Inch Tube-to-NPTF PART NUMBER NOM TUBE O.D. NPTF THREAD SIZE F IN G IN H IN H1 IN L IN 6503 56 11WP2 1/4 1/8 1/2 .43 1.60 .88 .71 6503 56 14WP2 1/4 1/4 9/16 .43 1.60 .88 .71 6503 56 18WP2 1/4 3/8 3/4 .43 1.63 .90 .71 6503 60 14WP2 3/8 1/4 3/4 .63 1.63 1.18 1.02 6503 60 18WP2 3/8 3/8 3/4 .63 1.63 1.18 1.02 6503 62 18WP2 1/2 3/8 15/16 .87 2.29 1.55 1.40 6503 62 22WP2 1/2 1/2 15/16 .87 2.99 1.59 1.40 C H1 H L F ØD ØG 6503 – Swivel Run Tee Metric Tube-to-BSPT PART NUMBER NOM TUBE O.D. BSPT THREAD SIZE F MM G MM H MM H1 MM L MM 6503 06 10WP2 6 R1/8 13 10.5 40 22 18.5 6503 06 13WP2 6 R1/4 14 10.5 40 22 18.5 6503 06 17WP2 6 R3/8 17 10.5 40 22 18.5 6503 08 10WP2 8 R1/8 19 13.5 50 27 23 6503 08 13WP2 8 R1/4 19 13.5 50 27 23 6503 08 17WP2 8 R3/8 19 13.5 50 27 23 6503 10 13WP2 10 R1/4 19 16 56.5 30 26.5 6503 10 17WP2 10 R3/8 19 16 56.5 30 26.5 6503 10 21WP2 10 R1/2 19 16 56.5 30 26.5 6503 12 17WP2 12 R3/8 22 19 65.5 34.5 31 6503 12 21WP2 12 R1/2 22 19 65.5 34.5 31 C H1 H L F ØD ØG 6509 – Swivel Elbow Fractional Inch Tube-to-NPTF PART NUMBER NOM TUBE O.D. NPTF THREAD SIZE F IN G IN H IN L IN 6509 56 11WP2 1/4 1/8 1/2 .43 1.10 .93 6509 56 14WP2 1/4 1/4 9/16 .43 1.10 .93 6509 56 18WP2 1/4 3/8 3/4 .43 1.12 .93 6509 60 14WP2 3/8 1/4 3/4 .63 1.50 1.34 6509 60 18WP2 3/8 3/8 3/4 .63 1.50 1.34 6509 62 18WP2 1/2 3/8 15/16 .87 1.99 1.83 6509 62 22WP2 1/2 1/2 15/16 .87 1.99 1.83 Metric Tube-to-BSPT PART NUMBER NOM TUBE O.D. BSPT THREAD SIZE F MM G MM H MM L MM 6509 06 10WP2 6 R1/8 13 10.5 28 24 6509 06 13WP2 6 R1/4 14 10.5 28 24 6509 06 17WP2 6 R3/8 17 10.5 28 24 6509 08 10WP2 8 R1/8 19 13.5 34 29.5 6509 08 13WP2 8 R1/4 19 13.5 34 29.5 6509 08 17WP2 8 R3/8 19 13.5 34 29.5 6509 10 13WP2 10 R1/4 19 16 38 34.5 6509 10 17WP2 10 R3/8 19 16 38 34.5 6509 10 21WP2 10 R1/2 22 16 38 34.5 6509 12 17WP2 12 R3/8 22 19 44 40 6509 12 21WP2 12 R1/2 22 19 44 40 L H C ØG F ØD 6521 – Stem Adapter Fractional Inch Tube-to-NPTF PART NUMBER NOM TUBE O.D. NPTF THREAD SIZE F IN H IN 6521 56 11WP2 1/4 1/8 1/2 .75 6521 56 14WP2 1/4 1/4 1/2 .75 6521 56 18WP2 1/4 3/8 3/4 .77 6521 60 14WP2 3/8 1/4 3/4 .98 6521 60 18WP2 3/8 3/8 3/4 .98 6521 62 18WP2 1/2 3/8 15/16 1.22 6521 62 22WP2 1/2 1/2 15/16 1.28 Metric Tube-to-BSPT PART NUMBER NOM TUBE O.D. BSPT THREAD SIZE F IN H IN 6521 06 10WP2 6 R1/8 13 19 6521 06 13WP2 6 R1/4 14 19 6521 06 17WP2 6 R3/8 17 19 6521 08 10WP2 8 R1/8 19 23 6521 08 13WP2 8 R1/4 19 23 6521 08 17WP2 8 R3/8 19 23 6521 10 13WP2 10 R1/4 19 25 6521 10 17WP2 10 R3/8 19 25 6521 10 21WP2 10 R1/2 22 25 6521 12 17WP2 12 R3/8 22 28 6521 12 21WP2 12 R1/2 22 28 C H ØD F Parker Hannifin Corporation Fluid System Connectors Otsego, Michigan LIQUIfit Fittings 8 6351 – End Stop Fractional Inch Tube PART NUMBER TUBE O.D. G IN H IN 6351 04 00WP2 5/32 .33 .59 6351 56 00WP2 1/4 .43 .63 6351 08 00WP2 5/16 .53 .85 6351 60 00WP2 3/8 .63 .88 Metric Tube PART NUMBER TUBE O.D. G MM H MM 6351 04 00WP2 4 8.5 15 6351 06 00WP2 6 10.5 17 6351 08 00WP2 8 13.5 21.5 6351 10 00WP2 10 16 22 6351 12 00WP2 12 19 27.5 H ØD ØG 6322 – Stem Hose Barb Fractional Inch Tube-to-Stem PART NUMBER STEM O.D. HOSE BARB L IN L1 IN L2 IN 6322 56 56WP2 1/4 1/4 1.65 1.00 .67 6322 60 56WP2 3/8 1/4 1.97 1.16 .87 6322 60 08WP2 3/8 5/16 1.97 1.16 .87 6322 60 60WP2 3/8 3/8 1.97 1.16 .87 6322 62 60WP2 1/2 3/8 2.05 1.30 1.07 Metric Tube-to-Stem PART NUMBER STEM O.D. HOSE BARB L IN L1 IN L2 IN 6322 06 00WP2 6 4 37.0 25.0 17 6322 08 00WP2 8 6 39.5 21.0 17 6322 10 00WP2 10 7 50.0 29.5 22 Ø D1 Ø D3 Ø D2 L L1 L2 6508 – Swivel Branch Tee Fractional Inch Tube-to-NPTF PART NUMBER NOM TUBE O.D. NPTF THREAD SIZE F IN G IN H IN L IN 6508 56 11WP2 1/4 1/8 1/2 .43 1.10 .71 6508 56 14WP2 1/4 1/4 9/16 .43 1.10 .71 6508 56 18WP2 1/4 3/8 3/4 .43 1.10 .71 6508 60 14WP2 3/8 1/4 3/4 .63 1.50 1.02 6508 60 18WP2 3/8 3/8 3/4 .63 1.50 1.02 6508 62 18WP2 1/2 3/8 15/16 .87 1.97 1.40 6508 62 22WP2 1/2 1/2 15/16 .87 2.00 1.40 Metric Tube-to-BSPT PART NUMBER NOM TUBE O.D. BSPT THREAD SIZE F MM G MM H MM L MM 6508 06 10WP2 6 R1/8 13 10.5 28 18 6508 06 13WP2 6 R1/4 14 10.5 28 18 6508 06 17WP2 6 R3/8 17 10.5 28 18 6508 08 10WP2 8 R1/8 19 13.5 34 23 6508 08 13WP2 8 R1/4 19 13.5 34 23 6508 08 17WP2 8 R3/8 19 13.5 34 23 6508 10 13WP2 10 R1/4 19 16 38 26.5 6508 10 17WP2 10 R3/8 19 16 38 26.5 6508 10 21WP2 10 R1/2 19 16 38 26.5 6508 12 17WP2 12 R3/8 22 19 44 31 6508 12 21WP2 12 R1/2 22 19 44 31 L2 L2 C H ØD ØG F 6326 – Plug Fractional Inch Plug-to-Tube PART NUMBER STEM O.D. L IN L1 IN 6326 56 00WP2 1/4 1.44 .87 6326 08 00WP2 5/16 1.38 .69 6326 60 00WP2 3/8 1.67 .87 6326 62 00WP2 1/2 1.91 .85 Metric Plug-to-Tube PART NUMBER STEM O.D. L MM L1 MM 6326 04 00WP2 4 30 15.5 6326 06 00WP2 6 33 16.5 6326 08 00WP2 8 33 17.5 6326 10 00WP2 10 42 21.0 6326 12 00WP2 12 45 22.0 L1 L Ø G Ø D 6548 – Swivel Y Connector Fractional Inch Tube-to-NPTF PART NUMBER NOM TUBE O.D. NPTF THREAD SIZE C HEX IN L IN H IN N IN 6548 56 11WP2 1/4 1/8 1/2 1.59 .88 .45 6548 56 14WP2 1/4 1/4 1/2 1.59 .88 .45 6548 56 18WP2 1/4 3/8 3/4 1.62 .88 .45 6548 60 14WP2 3/8 1/4 3/4 2.24 1.30 .66 6548 60 18WP2 3/8 3/8 3/4 2.24 1.30 .66 6548 62 18WP2 1/2 3/8 15/16 2.8 1.78 .91 6548 62 22WP2 1/2 1/2 15/16 2.84 1.78 .91 Parker Hannifin Corporation Fluid System Connectors Otsego, Michigan 9 MC – Male Connector Tube-to-Pipe GRAY ACETAL EPDM SEAL WHITE POLYPROPYLENE EPDM SEAL NATURAL KYNAR FLUOROCARBON SEAL NOM TUBE O.D. NPTF THD SIZE C HEX L OVERALL LENGTH D THRU HOLE MIN. A4MC2-MG PP4MC2 F4MC2 1/4 1/8 11/16 1.28 .175 A4MC4-MG PP4MC4 F4MC4 1/4 1/4 11/16 1.14 .175 A4MC6-MG PP4MC6 F4MC6 1/4 3/8 11/16 1.18 .175 A5MC2-MG 5/16 1/8 13/16 1.46 .175 A5MC4-MG 5/16 1/4 13/16 1.41 .188 A5MC6-MG 5/16 3/8 13/16 1.27 .188 A6MC2-MG F6MC2 3/8 1/8 13/16 1.46 .175 A6MC4-MG PP6MC4 F6MC4 3/8 1/4 13/16 1.41 .250 A6MC6-MG PP6MC6 F6MC6 3/8 3/8 13/16 1.27 .250 A6MC8-MG F6MC8 3/8 1/2 15/16 1.45 .250 A8MC6-MG PP8MC6 1/2 3/8 15/16 1.65 .360 A8MC8-MG PP8MC8 1/2 1/2 15/16 1.46 .375 For nonstandard plastic collet, remove -MG suffix. L C HEX D FC – Female Connector Tube-to-Pipe GRAY ACETAL EPDM SEAL WHITE POLYPROPYLENE EPDM SEAL NATURAL KYNAR FLUOROCARBON SEAL NOM. TUBE O.D. NPTF THREAD SIZE C HEX L OVERALL LENGTH D THRU HOLE MIN. A4FC2-MG PP4FC2 F4FC2 1/4 1/8 11/16 1.20 .175 A4FC4-MG PP4FC4 F4FC4 1/4 1/4 23/32 1.32 .175 A5FC4-MG 5/16 1/4 13/16 1.41 .188 A5FC6-MG 5/16 3/8 1 1.50 .188 A6FC4-MG PP6FC4 F6FC4 3/8 1/4 13/16 1.41 .250 A6FC6-MG PP6FC6 F6FC6 3/8 3/8 1 1.50 .250 A6FC8-MG 3/8 1/2 1-1/8 1.52 .250 A8FC6-MG PP8FC6 1/2 3/8 1-1/8 1.60 .375 A8FC8-MG PP8FC8 1/2 1/2 1-1/8 1.75 .375 For nonstandard plastic collet, remove -MG suffix. C D L NPTF FE – Female Elbow Tube-to-Pipe GRAY ACETAL EPDM SEAL WHITE POLYPROPYLENE EPDM SEAL NATURAL KYNAR FLUOROCARBON SEAL NOM. TUBE O.D. NPTF THREAD SIZE M N D THRU HOLE MIN. A4FE4-MG 1/4 1/4 0.84 1.00 .18 A6FE4-MG 3/8 1/4 1.03 1.00 .25 A6FE6-MG 3/8 3/8 1.03 1.00 .25 For nonstandard plastic collet, remove -MG suffix. M N D • Engineered O-ring increases seal compression on tube • O-ring available in EPDM, Nitrile, or Fluorocarbon • Body available in Acetal, Polypropylene, or Kynar • Gripping teeth available in Stainless Steel or with an engineered thermoplastic bite edge • Collet available in Acetal, Kynar or engineered thermoplastic • FDA compliant • All fittings are NSF-51 listed and gray acetal fittings are also NSF-61 listed collet gripping teeth O-ring all plastic body TrueSeal™ Thermoplastic Push-In Fittings – NSF 51 – A 4 MC 2 -MG body material Tube OD1 configuration abbreviation Tube OD2 metal gripper Parker Hannifin Corporation Fluid System Connectors Otsego, Michigan TrueSeal™ Thermoplastic Push-In Fittings 10 N D M EU – Elbow Union Tube-to-Tube GRAY ACETAL EPDM SEAL WHITE POLYPROPYLENE EPDM SEAL NATURAL KYNAR FLUOROCARBON SEAL NOM. TUBE O.D. 1 NOM. TUBE O.D. 2 M N D THRU HOLE MIN. A4EU4-MG PP4EU4 F4EU4 1/4 1/4 0.87 0.87 .175 A5EU4-MG 5/16 1/4 1.052 0.90 .175 A5EU5-MG 5/16 5/16 1.02 1.02 .188 A6EU4-MG PP6EU4 F6EU4 3/8 1/4 1.02 0.90 .212 A6EU5-MG 3/8 5/16 1.02 1.02 .175 A6EU6-MG PP6EU6 F6EU6 3/8 3/8 1.02 1.02 .250 A8EU6-MG 1/2 3/8 1.20 1.20 .250 A8EU8-MG PP8EU8 1/2 1/2 1.20 1.20 .375 For nonstandard plastic collet, remove -MG suffix. M D A B N M A TU – Tee Union Tube-to-Tube GRAY ACETAL EPDM SEAL WHITE POLYPROPYLENE EPDM SEAL NATURAL KYNAR FLUOROCARBON SEAL NOM. TUBE O.D. M N D THRU HOLE MIN. TUBE A TUBE B A4TU4-MG PP4TU4 F4TU4 1/4 1/4 0.81 0.85 .175 A5TU5-MG 5/16 5/16 1.02 1.02 .188 A6TU4-MG PP6TU4 F6TU4 3/8 1/4 1.02 1.03 .175 A6TU6-MG PP6TU6 F6TU6 3/8 3/8 1.02 1.02 .290 A8TU8-MG PP8TU8 1/2 1/2 1.20 1.20 .375 For nonstandard plastic collet, remove -MG suffix. WY – “Y” Union Tube-to-Tube GRAY ACETAL EPDM SEAL WHITE POLYPROPYLENE EPDM SEAL NATURAL KYNAR FLUOROCARBON SEAL NOM. TUBE O.D. L W D THRU HOLE MIN. INLET TUBE A OUTLET TUBE B A5WY5-MG 5/16 5/16 2.250 1.75 0.190 A6WY4-MG 3/8 1/4 2.100 1.43 0.190 A6WY5-MG 3/8 5/16 2.200 1.75 0.190 A6WY6-MG 3/8 3/8 2.175 1.75 0.250 For nonstandard plastic collet, remove -MG suffix. W L D UC – Union Connector Tube-to-Tube GRAY ACETAL EPDM SEAL WHITE POLYPROPYLENE EPDM SEAL NATURAL KYNAR FLUOROCARBON SEAL NOM. TUBE O.D. L OVERALL LENGTH D THRU HOLE MIN. A4UC4-MG PP4UC4 F4UC4 1/4 1.49 .175 A5UC4-MG 5/16-1/4 1.70 .175 A5UC5-MG 5/16 1.70 .188 A6UC4-MG PP6UC4 F6UC4 3/8-1/4 1.70 .175 A6UC5-MG 3/8-5/16 1.70 .188 A6UC6-MG PP6UC6 F6UC6 3/8 1.70 .250 A8UC5-MG 1/2-5/16 1.90 .188 A8UC6-MG PP8UC6 1/2-3/8 1.90 .250 A8UC8-MG PP8UC8 1/2 1.91 .375 For nonstandard plastic collet, remove -MG suffix. L D C D L FA – Faucet Adapter Tube-to-Faucet GRAY ACETAL EPDM SEAL WHITE POLYPROPYLENE EPDM SEAL NATURAL KYNAR FLUOROCARBON SEAL NOM. TUBE O.D. UNS-2B THREAD SIZE C HEX L OVERALL LENGTH D THRU HOLE MIN. A4FA7-MG PP4FA7 F4FA7 1/4 7/16-24 23/32 1.32 .190 A5FA7-MG 5/16 7/16-24 13/16 1.41 .190 A6FA7-MG PP6FA7 F6FA7 3/8 7/16-24 13/16 1.41 .190 For nonstandard plastic collet, remove -MG suffix. M N D ME – Male Elbow Tube-to-Pipe GRAY ACETAL EPDM SEAL WHITE POLYPROPYLENE EPDM SEAL NATURAL KYNAR FLUOROCARBON SEAL NOM. TUBE O.D. NPTF THD SIZE M N D THRU HOLE MIN. A4ME2-MG PP4ME2 F4ME2 1/4 1/8 0.84 0.94 .175 A4ME4-MG PP4ME4 F4ME4 1/4 1/4 0.84 0.94 .175 A4ME6-MG PP4ME6 F4ME6 1/4 3/8 0.84 1.04 .175 A5ME4-MG 5/16 1/4 1.03 1.08 .175 A5ME6-MG 5/16 3/8 1.03 1.06 .188 A6ME4-MG PP6ME4 F6ME4 3/8 1/4 1.03 1.08 .250 A6ME6-MG PP6ME6 F6ME6 3/8 3/8 1.03 1.06 .250 For nonstandard plastic collet, remove -MG suffix. A B Parker Hannifin Corporation Fluid System Connectors Otsego, Michigan TrueSeal™ Thermoplastic Push-In Fittings 11 MES – Male Elbow Swivel Tube-to-Pipe GRAY ACETAL EPDM SEAL WHITE POLYPROPYLENE EPDM SEAL NATURAL KYNAR FCB SEAL NOM. TUBE O.D. NPTF THD SIZE C HEX M N D THRU HOLE MIN. A4MES2-MG PP4MES2 F4MES2 1/4 1/8 9/16 0.87 1.60 .175 A4MES4-MG PP4MES4 F4MES4 1/4 1/4 11/16 0.87 1.71 .175 A4MES6-MG PP4MES6 F4MES6 1/4 3/8 13/16 0.90 1.91 .212 A5MES2-MG 5/16 1/8 9/16 1.02 1.78 .188 A5MES4-MG 5/16 1/4 11/16 1.02 1.90 .188 A5MES6-MG 5/16 3/8 13/16 1.02 1.90 .188 A6MES2-MG F6MES2 3/8 1/8 9/16 1.02 1.65 .175 A6MES4-MG PP6MES4 F6MES4 3/8 1/4 13/16 1.02 1.90 .250 A6MES6-MG PP6MES6 F6MES6 3/8 3/8 13/16 1.02 1.90 .250 A8MES4-MG 1/2 1/4 13/16 1.20 2.10 .240 A8MES6-MG PP8MES6 1/2 3/8 13/16 1.20 2.10 .375 A8MES8-MG PP8MES8 1/2 1/2 1 1.20 2.32 .375 * Part consists of elbow union and tube stem adaptor. Note: Assemblies with metal gripper collets are permanent. Assemblies with plastic collets can be taken apart. M N C HEX D M D C HEX N M MTS – Male Tee Swivel Tube-to-Pipe GRAY ACETAL EPDM SEAL WHITE POLYPROPYLENE EPDM SEAL NATURAL KYNAR FCB SEAL NOM TUBE O.D. NPTF THD SIZE C HEX M N D THRU HOLE MIN. A4MTS2-MG PP4MTS2 F4MTS2 1/4 1/8 9/16 0.81 1.60 .175 A4MTS4-MG PP4MTS4 F4MTS4 1/4 1/4 11/16 0.81 1.71 .175 A5MTS2-MG 5/16 1/8 9/16 1.02 1.78 .188 A5MTS4-MG 5/16 1/4 11/16 1.02 1.90 .188 A5MTS6-MG 5/16 3/8 13/16 1.02 1.90 .188 A6MTS2-MG F6MTS2 3/8 1/8 9/16 1.02 1.75 .175 A6MTS4-MG PP6MTS4 F6MTS4 3/8 1/4 13/16 1.02 1.90 .250 A6MTS6-MG PP6MTS6 F6MTS6 3/8 3/8 13/16 1.02 1.90 .250 A8MTS4-MG 1/2 1/4 13/16 1.20 2.10 .240 A8MTS6-MG PP8MTS6 1/2 3/8 13/16 1.20 2.10 .375 A8MTS8-MG PP8MTS8 1/2 1/2 1 1.20 2.32 .375 * Part consists of tee union and tube stem adaptor. Note: Assemblies with metal gripper collets are permanent. Assemblies with plastic collets can be taken apart. TEU – Tube Elbow Union Tube-to-Stem GRAY ACETAL EPDM SEAL WHITE POLYPROPYLENE EPDM SEAL NATURAL KYNAR FLUOROCARBON SEAL NOM. TUBE O.D. TUBE STEM O.D. M N D THRU HOLE MIN. A4TEU4-MG PP4TEU4 F4TEU4 1/4 1/4 .84 1.21 .125 A4TEU6-MG F4TEU6 1/4 3/8 .84 1.35 .125 A5TEU5-MG 5/16 5/16 1.03 1.40 .188 A6TEU4-MG F6TEU4 3/8 1/4 1.03 1.29 .125 A6TEU6-MG PP6TEU6 F6TEU6 3/8 3/8 1.03 1.64 .250 A8TEU8-MG PP8TEU8 1/2 1/2 1.21 1.64 .380 For nonstandard plastic collet, remove -MG suffix. N D M TPL – Plug GRAY ACETAL WHITE POLYPROPYLENE NATURAL KYNAR FITTING SIZE L OVERALL LENGTH A4TPL PP4TPL F4TPL 1/4 0.88 A6TPL PP6TPL F6TPL 3/8 1.45 A8TPL PP8TPL 1/2 1.50 L TEB – Tube Elbow Barb Connector Tube-to-Barb GRAY ACETAL WHITE POLYPROPYLENE NATURAL KYNAR TUBE STEM O.D. BARB I.D. M N D THRU HOLE MIN. A4TEB4 PP4TEB4 F4TEB4 1/4 1/4 0.89 1.00 .140 A6TEB6 PP6TEB6 F6TEB6 3/8 3/8 1.34 1.21 .250 A8TEB8 1/2 1/2 1.30 1.30 .390 M N D BU – Bulkhead Union Tube-to-Tube GRAY ACETAL EPDM SEAL WHITE POLYPROPYLENE EPDM SEAL NATURAL KYNAR FCB SEAL NOM. TUBE O.D. C1 HEX C2 HEX L OVERALL LENGTH P MAX. WALL THK. D THRU HOLE MIN. BKHD HOLE DRILL SIZE A4BU4-MG PP4BU4 F4BU4 1/4 15/16 15/16 1.50 .50 .175 7/8 A5BU5-MG 5/16 1-1/16 1-1/16 1.75 .62 .188 1 A6BU4-MG PP6BU4 3/8-1/4 1-1/16 1-1/16 1.75 .62 .175 1 A6BU6-MG PP6BU6 F6BU6 3/8 1-1/16 1-1/16 1.75 .62 .250 1 A8BU8-MG 1/2 1-1/4 1-1/4 2.04 .70 .375 1-1/8 For nonstandard plastic collet, remove -MG suffix. C D P MAX L Parker Hannifin Corporation Fluid System Connectors Otsego, Michigan TrueSeal™ Thermoplastic Push-In Fittings 12 MRS – Male Run Swivel Tube-to-Pipe GRAY ACETAL EPDM SEAL WHITE POLYPROPYLENE EPDM SEAL NATURAL KYNAR FCB SEAL NOM TUBE O.D. NPTF THD SIZE C HEX L M N D THRU HOLE MIN. A4MRS2-MG PP4MRS2 F4MRS2 1/4 1/8 9/16 1.55 0.81 0.85 .175 A4MRS4-MG PP4MRS4 F4MRS4 1/4 1/4 11/16 1.67 0.81 0.85 .175 A5MRS2-MG 5/16 1/8 9/16 1.78 1.02 1.02 .188 A5MRS4-MG 5/16 1/4 11/16 1.90 1.02 1.02 .188 A5MRS6-MG 5/16 3/8 13/16 1.90 1.02 1.02 .188 A6MRS4-MG PP6MRS4 F6MRS4 3/8 1/4 13/16 1.90 1.02 1.02 .250 A6MRS6-MG PP6MRS6 F6MRS6 3/8 3/8 13/16 1.90 1.02 1.02 .250 A8MRS4-MG 1/2 1/4 13/16 2.10 1.20 1.20 .240 A8MRS6-MG PP8MRS6 1/2 3/8 13/16 2.10 1.20 1.20 .375 A8MRS8-MG PP8MRS8 1/2 1/2 1 2.32 1.20 1.20 .375 *Part consists of tee union and tube stem adaptor. Note: Assemblies with metal gripper collets are permanent. Assemblies with plastic collets can be taken apart. M D C HEX N L TMC – Tube Stem Adapter Tube Stem-to-Pipe GRAY ACETAL EPDM SEAL WHITE POLYPROPYLENE EPDM SEAL NATURAL KYNAR FLUOROCARBON SEAL NOM. TUBE O.D. NPTF THREAD SIZE C HEX L OVERALL LENGTH D THRU HOLE MIN. A4TMC2 PP4TMC2 F4TMC2 1/4 1/8 9/16 1.44 .175 A4TMC4 PP4TMC4 F4TMC4 1/4 1/4 11/16 1.56 .175 A5TMC2 5/16 1/8 9/16 1.5 .188 A5TMC4 5/16 1/4 11/16 1.67 .188 A5TMC6 5/16 3/8 13/16 1.67 .188 A6TMC4 PP6TMC4 F6TMC4 3/8 1/4 13/16 1.70 .250 A6TMC6 PP6TMC6 F6TMC6 3/8 3/8 13/16 1.70 .250 A8TMC4 1/2 1/4 13/16 1.82 .240 A8TMC6 PP8TMC6 1/2 3/8 13/16 1.82 .375 A8TMC8 PP8TMC8 1/2 1/2 1 2.04 .375 C HEX D L CU – Cross Tube-to-Tube GRAY ACETAL NOM TUBE O.D. M D THRU HOLE MIN. A4CU4-MG 1/4 .91 .175 A6CU6-MG 3/8 1.08 .250 L RD – Tube Reducer D Tube-to-Tube Stem GRAY ACETAL EPDM SEAL WHITE POLYPROPYLENE EPDM SEAL NATURAL KYNAR FLUOROCARBON SEAL NOM. TUBE O.D. TUBE STEM O.D. L D THRU HOLE MIN. A4RD5-MG PP4RD5 1/4 5/16 1.62 .18 A4RD6-MG PP4RD6 1/4 3/8 1.62 .18 A5RD6-MG 5/16 3/8 1.78 .25 A5RD8-MG 5/16 1/2 1.90 .25 A6RD8-MG 3/8 1/2 1.90 .25 For nonstandard plastic collet, remove -MG suffix. CAP – Tube Cap GRAY ACETAL EPDM SEAL WHITE POLYPROPYLENE EPDM SEAL NATURAL KYNAR FLUOROCARBON SEAL NOM. TUBE O.D. L OVERALL LENGTH A4CAP-MG PP4CAP F4CAP 1/4 0.77 A6CAP-MG PP6CAP 3/8 0.88 For nonstandard plastic collet, remove -MG suffix. L TCB – Tube-to-Barb Connector Tube-to-Barb GRAY ACETAL WHITE POLYPROPYLENE NATURAL KYNAR TUBE STEM O.D. BARB I.D. L OVERALL LENGTH D THRU HOLE MIN. A4TCB4 PP4TCB4 F4TCB4 1/4 1/4 1.67 .140 A6TCB4 F6TCB4 3/8 1/4 1.82 .140 A6TCB6 PP6TCB6 F6TCB6 3/8 3/8 1.98 .250 A8TCB6 1/2 3/8 2.10 .250 A8TCB8 1/2 1/2 2.10 .375 D L Disconnect First, depress the manual release button, then pull the tubing out of the fitting. Connect Simply push the tubing until it bottoms out. Holding and sealing is accomplished instantaneously. Parker Hannifin Corporation Fluid System Connectors Otsego, Michigan 13 • Body available in Polypropylene or Nylon • Grab Ring available in full Stainless Steel or engineered thermoplastic • FDA compliant • 0° to +212°F for Polypropylene • -40° to +200°F for Nylon nut grab ring Nitrile O-ring all plastic body spacer – NSF 51 – L C HEX D MC – Male Connector Tube-to-Male pipe WHITE POLYPROPYLENE PART NUMBER BLACK POLYPROPYLENE PART NUMBER WHITE NYLON PART NUMBER NOM TUBE O.D. NPTF THREAD SIZE C HEX L OVERALL LENGTH D THRU HOLE MIN. W4MC4 P4MC4 N4MC4 1/4 1/4 11/16 1.51 .170 W4MC6 (+) P4MC6 (+) N4MC6 (+) 1/4 3/8 11/16 .148 .170 W5MC2 (+) P5MC2 N5MC2 5/16 1/8 11/16 1.38 .170 W5MC4 (+) P5MC4 N5MC4 5/16 1/4 11/16 1.50 .250 W6MC2 (+) P6MC2 N6MC2 3/8 1/8 13/16 1.50 .170 W6MC4 P6MC4 N6MC4 3/8 1/4 13/16 1.67 .250 W6MC6 P6MC6 N6MC6 3/8 3/8 13/16 1.67 .250 W6MC8 (+) P6MC8 N6MC8 3/8 1/2 1 1.78 .250 W6MC12 P6MC12 N6MC12 3/8 3/4 1 1.84 .250 W8MC2 (+) P8MC2 N8MC2 1/2 1/8 1 1.61 .170 W8MC4 (+) P8MC4 N8MC4 1/2 1/4 1 1.74 .250 W8MC6 P8MC6 N8MC6 1/2 3/8 1 1.74 .375 W8MC8 P8MC8 N8MC8 1/2 1/2 1 1.87 .375 W8MC12 (+) P8MC12 N8MC12 1/2 3/4 1 1.89 .375 W10MC2 (+) P10MC2 N10MC2 5/8 1/8 1-1/8 1.75 .170 W10MC4 (+) P10MC4 N10MC4 5/8 1/4 1-1/8 1.90 .250 W10MC6 (+) P10MC6 N10MC6 5/8 3/8 1-1/8 1.90 .375 W10MC8 (+) P10MC8 N10MC8 5/8 1/2 1-1/8 2.01 .500 W10MC12 (+) P10MC12 N10MC12 5/8 3/4 1-1/8 2.04 .500 M N C D ME – Male Elbow Tube-to-Male Pipe WHITE POLYPROPYLENE PART NUMBER BLACK POLYPROPYLENE PART NUMBER WHITE NYLON PART NUMBER NOM TUBE O.D. NPTF THD SIZE C HEX M N D THRU HOLE MIN. W4ME2 P4ME2 N4ME2 1/4 1/8 3/4 1.06 0.81 .170 W4ME4 P4ME4 N4ME4 1/4 1/4 3/4 1.06 1.02 .170 W4ME6 P4ME6 N4ME6 1/4 3/8 3/4 1.06 1.02 .170 W5ME2 (+) P5ME2 N5ME2 5/16 1/8 3/4 1.06 0.81 .193 W5ME4 (+) P5ME4 N5ME4 5/16 1/4 3/4 1.06 1.02 .193 W5ME6 (+) P5ME6 N5ME6 5/16 3/8 3/4 1.06 1.02 .193 W6ME4 P6ME4 N6ME4 3/8 1/4 7/8 1.28 1.12 .250 W6ME6 P6ME6 N6ME6 3/8 3/8 7/8 1.28 1.12 .250 W6ME8 P6ME8 N6ME8 3/8 1/2 1 1.28 1.34 .250 W6ME12 (+) P6ME12 N6ME12 3/8 3/4 1-3/16 1.59 1.40 .250 W8ME4 (+) P8ME4 N8ME4 (+) 1/2 1/4 1-1/16 1.48 1.22 .250 W8ME6 P8ME6 N8ME6 1/2 3/8 1-1/16 1.56 1.21 .375 W8ME8 P8ME8 N8ME8 1/2 1/2 1-1/16 1.56 1.34 .375 W8ME12 (+) P8ME12 (+) N8ME12 (+) 1/2 3/4 1-1/8 1.50 1.40 .375 W10ME8 (+) P10ME8 N10ME8 5/8 1/2 1-3/16 1.72 1.40 .500 Fast & Tite® Thermoplastic Fittings NOTE: (+) non-standard W 4 MC 2 body material Tube OD1 configuration abbreviation Tube OD2 Parker Hannifin Corporation Fluid System Connectors Otsego, Michigan 14 Fast & Tite® Thermoplastic Fittings FC – Female Connector Tube-to-Female Pipe WHITE POLYPROPYLENE PART NUMBER BLACK POLYPROPYLENE PART NUMBER WHITE NYLON PART NUMBER NOM TUBE O.D. NPTF THD SIZE C HEX M N D THRU HOLE MIN. W4FC2 P4FC2 N4FC2 1/4 1/8 11/16 1.10 0.84 .170 W4FC4 P4FC4 N4FC4 1/4 1/4 11/16 1.10 0.94 .170 W5FC2 (+) P5FC2 N5FC2 5/16 1/8 11/16 1.10 0.84 .193 W6FC4 P6FC4 N6FC4 3/8 1/4 13/16 1.30 1.06 .250 W6FC6 P6FC6 N6FC6 3/8 3/8 13/16 1.30 1.03 .250 W8FC6 (+) P8FC6 N8FC6 1/2 3/8 1 1.50 1.16 .375 W8FC8 P8FC8 N8FC8 1/2 1/2 1 1.50 1.27 .375 W10FC8 (+) P10FC8 N10FC8 5/8 1/2 1-1/8 1.70 1.34 .500 C D L FE – Female Elbow Tube-to-Female Pipe WHITE POLYPROPYLENE PART NUMBER BLACK POLYPROPYLENE PART NUMBER WHITE NYLON PART NUMBER NOM TUBE O.D. NPTF THD SIZE C HEX M N D THRU HOLE MIN. W4FE2 P4FE2 N4FE2 1/4 1/8 11/16 1.10 0.84 .170 W4FE4 P4FE4 N4FE4 1/4 1/4 11/16 1.10 0.94 .170 W5FE2 (+) P5FE2 N5FE2 5/16 1/8 11/16 1.10 0.84 .193 W6FE4 P6FE4 N6FE4 3/8 1/4 13/16 1.30 1.06 .250 W6FE6 P6FE6 N6FE6 3/8 3/8 13/16 1.30 1.03 .250 W8FE6 (+) P8FE6 N8FE6 1/2 3/8 1 1.50 1.16 .375 W8FE8 P8FE8 N8FE8 1/2 1/2 1 1.50 1.27 .375 W10FE8 (+) P10FE8 N10FE8 5/8 1/2 1-1/8 1.70 1.34 .500 M N C D D C C N M M TU – Tee Union Tube-to-tube WHITE POLYPROPYLENE PART NUMBER BLACK POLYPROPYLENE PART NUMBER WHITE NYLON PART NUMBER NOM. TUBE O.D.1 NOM. TUBE O.D.2 C HEX M N D THRU HOLE MIN. W4TU4 P4TU4 N4TU4 1/4 1/4 11/16 1.09 1.09 .170 W5TU5 (+) P5TU5 N5TU5 5/16 5/16 11/16 1.09 1.09 .187 W6TU6 P6TU6 N6TU6 3/8 3/8 13/16 1.30 1.30 .250 W8TU6 (+) P8TU6 N8TU6 1/2 3/8 1 1.46 1.39 .250 W8TU8 P8TU8 N8TU8 1/2 1/2 1 1.46 1.46 .375 W10TU6 (+) P10TU6 N10TU6 5/8 3/8 1-1/8 1.68 1.46 .250 W10TU10 (+) P10TU10 N10TU10 5/8 5/8 1-3/16 1.68 1.68 .500 D L C UC – Union Connector Tube-to-Tube WHITE PPL PART NUMBER BLACK PPL PART NUMBER WHITE NYLON PART NUMBER NOM. TUBE O.D. C HEX L OVERALL LENGTH D THRU HOLE MIN. W4UC4 P4UC4 N4UC4 1/4 11/16 1.62 .170 W5UC4 (+) P5UC4 N5UC4 5/16-1/4 11/16 1.62 .170 W5UC5 (+) P5UC5 N5UC5 5/16 11/16 1.62 .190 W6UC4 P6UC4 N6UC4 3/8-1/4 13/16 1.80 .170 W6UC5 (+) P6UC5 N6UC5 3/8-5/16 13/16 1.80 .190 W6UC6 P6UC6 N6UC6 3/8 13/16 1.92 .250 W8UC6 P8UC6 N8UC6 1/2-3/8 1 1.95 .250 W8UC8 P8UC8 N8UC8 1/2 1 2.03 .375 W10UC6 (+) P10UC6 N10UC6 5/8-3/8 1-1/8 2.19 .250 W10UC8 (+) P10UC8 N10UC8 5/8-1/2 1-1/8 2.24 .375 W10UC10 (+) P10UC10 N10UC10 5/8 1-1/8 2.40 .500 EU – Elbow Union Tube-to-Tube WHITE POLYPROPYLENE PART NUMBER BLACK POLYPROPYLENE PART NUMBER WHITE NYLON PART NUMBER NOM. TUBE O.D.1 NOM. TUBE O.D.2 C HEX M N D THRU HOLE MIN. W4EU4 P4EU4 N4EU4 1/4 1/4 3/4 1.06 1.06 .170 W5EU4 (+) P5EU4 N5EU4 5/16 1/4 3/4 1.06 1.06 .170 W5EU5 (+) P5EU5 N5EU5 5/16 5/16 3/4 1.06 1.06 .193 W6EU4 P6EU4 N6EU4 3/8 1/4 7/8 1.06 1.28 .170 W6EU5 (+) P6EU5 N6EU5 3/8 5/16 7/8 1.06 1.28 .170 W6EU6 P6EU6 N6EU6 3/8 3/8 7/8 1.28 1.28 .250 W8EU6 P8EU6 N8EU6 1/2 3/8 1-1/16 1.37 1.56 .250 W8EU8 P8EU8 N8EU8 1/2 1/2 1-1/16 1.56 1.56 .375 W10EU10 (+) P10EU10 N10EU10 5/8 5/8 1-3/16 1.72 1.72 .500 N C D M NOTE: (+) non-standard 1 2 1 1 2 Parker Hannifin Corporation Fluid System Connectors Otsego, Michigan 15 Fast & Tite® Thermoplastic Fittings OR – O-Ring O-RING PART NUMBER FOR NOM. TUBE O.D. 4OR 1/4 5OR 5/16 6OR 3/8 8OR 1/2 10OR 5/8 NS – Nut and Spacer Sets WHITE POLYPROPYLENE PART NUMBER BLACK POLYPROPYLENE PART NUMBER WHITE NYLON PARTNUMBER FOR NOM. TUBE O.D. W4NS P4NS N4NS 1/4 W5NS P5NS N5NS 5/16 W6NS P6NS N6NS 3/8 W8NS P8NS N8NS 1/2 W10NS P10NS N10NS 5/8 GR – Grab Ring (Stainless or Plastic) STAINLESS GRAB RING PART NUMBER PLASTIC GRAB RING PART NUMBER FOR NOM. TUBE O.D. 4GR 4GRP 1/4 5GR 5GRP 5/16 6GR 6GRP 3/8 8GR 8GRP 1/2 10GR 10GRP 5/8 D C C N M M MT – Male Branch Tee Tube-to-Male Pipe WHITE POLYPROPYLENE PART NUMBER BLACK POLYPROPYLENE PART NUMBER WHITE NYLON PART NUMBER NOM. TUBE O.D. NPTF THD SIZE C HEX M N D THRU HOLE MIN. W4MT2 P4MT2 N4MT2 1/4 1/8 11/16 1.09 0.89 .170 W4MT4 P4MT4 N4MT4 1/4 1/4 11/16 1.09 1.06 .170 W5MT2 (+) P5MT2 N5MT2 5/16 1/8 11/16 1.09 0.89 .170 W5MT4 (+) P5MT4 N5MT4 5/16 1/4 11/16 1.09 1.06 .187 W6MT4 P6MT4 N6MT4 3/8 1/4 13/16 1.30 1.12 .250 W6MT6 P6MT6 N6MT6 3/8 3/8 13/16 1.30 1.10 .250 W8MT6 P8MT6 N8MT6 1/2 3/8 1 1.46 1.22 .375 W8MT8 P8MT8 N8MT8 1/2 1/2 1 1.46 1.43 .375 W10MT8 (+) P10MT8 N10MT8 5/8 1/2 1-1/8 1.68 1.41 .500 MR – Male Run Tee Tube-to-Male Pipe WHITE POLYPROPYLENE PART NUMBER BLACK POLYPROPYLENE PART NUMBER WHITE NYLON PART NUMBER NOM TUBE O.D. NPTF THD SIZE C HEX M N D THRU HOLE MIN. W4MR2 P4MR2 N4MR2 1/4 1/8 11/16 1.09 0.89 .170 W6MR4 P6MR4 N6MR4 3/8 1/4 13/16 1.30 1.17 .250 W8MR6 P8MR6 N8MR6 1/2 3/8 1 1.46 1.28 .375 W10MR8 (+) P10MR8 N10MR8 5/8 1/2 1-1/8 1.68 1.50 .500 M D M N C C BU – Bulkhead Union Tube-to-Tube WHITE POLYPROPYLENE PART NUMBER BLACK POLYPROPYLENE PART NUMBER WHITE NYLON PART NUMBER NOM TUBE O.D. A REF. C HEX L OVERALL LENGTH P MAX D THRU HOLE MIN. BULKHEAD HOLE DRILL SIZE W4BU4 P4BU4 N4BU4 1/4 1/4 13/16 2-11/64 3/8 .170 21/32 W5BU5 (+) P5BU5 N5BU5 5/16 1/4 13/16 2-11/64 3/8 .187 21/32 W6BU6 P6BU6 N6BU6 3/8 9/32 15/16 2-39/64 1/2 .250 25/32 W8BU8 P8BU8 N8BU8 1/2 5/16 1-5/32 2-3/4 1/2 .375 31/32 C D A P A L NOTE: (+) non-standard Parker Hannifin Corporation Fluid System Connectors Otsego, Michigan 16 Par-Barb® Thermoplastic Fittings Par-Barb® fittings are injection molded from high strength, chemically inert , thermoplastic materials. These fittings meet FDA and NSF-51 specifications for food contact. The multiple barb design generates the maximum gripping and sealing power when combined with a hose clamp. SPECIFICATIONS PRESSURE RANGE: UP TO 125 PSI. TEMPERATURE RANGE: BLACK POLYPROPYLENE: 10°F (-12°C) TO +220°F (+104°C) WHITE NYLON: -40°F (-40°C) TO +200°F (+93°C) TUBE MATERIAL: VINYL, POLYURETHANE, RUBBER HOSE TUBE I.D.: 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 1, 1-1/4, 1-1/2 OPERATING FLUID: AIR, WATER, OTHER FLUIDS COMPATIBLE WITH MATERIALS OF CONSTRUCTION NOTE: FOR OTHER TYPES OF FLUIDS OR GASSES, PLEASE CONSULT FACTORY MATERIALS OF CONSTRUCTION BODIES: WHITE NYLON, BLACK POLYPROPYLENE WASHER: UNIPRENE NOMENCLATURE EXAMPLE: 325HB- 4-6N ATTRIBUTE: 325 PLASTIC MALE PIPE CONNECTOR HB HOSE BARB 4 1/4 HOSE I.D. 6 3/8 NPT N WHITE NYLON Parker Hannifin Corporation Fluid System Connectors Otsego, Michigan 17 Par-Barb® Thermoplastic Fittings L O.D. 1&2 O.D. 1&2 O.D.3 N D M N O.D.1 O.D.2 L C HEX Union Connector 322HB WHITE NYLON PART NO. BLACK POLYPROPYLENE PART NO. TUBE OR HOSE I.D. 1 TUBE OR HOSE I.D. 2 O.D. 1 O.D. 2 L FLOW DIA. D 322HB-2N 322HB-2PP 1/8 1/8 .18 .18 .66 .09 322HB-3N 322HB-3PP 3/16 3/16 .25 .25 1.61 .12 322HB-4-2N 322HB-4-2PP 1/4 1/8 .31 .21 1.61 .08 322HB-4-3N 322HB-4-3PP 1/4 3/16 .31 .25 1.61 .13 322HB-4N 322HB-4PP 1/4 1/4 .31 .31 1.61 .16 322HB-5N 322HB-5PP 5/16 5/16 .37 .37 1.61 .22 322HB-6-4N 322HB-6-4PP 3/8 1/4 .43 .31 1.61 .15 322HB-6-5N 322HB-6-5PP 3/8 5/16 .43 .37 1.62 .22 322HB-6N 322HB-6PP 3/8 3/8 .43 .43 1.61 .25 322HB-8-4N 322HB-8-4PP 1/2 1/4 .55 .31 1.73 .15 322HB-8-6N 322HB-8-6PP 1/2 3/8 .55 .43 1.73 .25 322HB-8N 322HB-8PP 1/2 1/2 .56 .56 1.74 .38 322HB-10-6N 322HB-10-6PP 5/8 3/8 .66 .43 1.73 .25 322HB-10-8N 322HB-10-8PP 5/8 1/2 .66 .55 1.73 .37 322HB-10N 322HB-10PP 5/8 5/8 .67 .67 1.73 .47 322HB-12-8N 322HB-12-8PP 3/4 1/2 .81 .55 2.99 .38 322HB-12N 322HB-12PP 3/4 3/4 .80 .80 2.97 .58 322HB-16N 1 1 1.08 1.08 3.12 .82 322HB-20N 1– 1/4 1– 1/4 1.26 1.26 3.58 1.00 322HB-24N 1–1/2 1–1/2 1.51 1.51 3.58 1.25 Union Tee 364HB WHITE NYLON PART NO. BLACK POLYPROPYLENE PART NO. TUBE OR HOSE I.D. 1- 2 TUBE OR HOSE I.D. 3 O.D. 1 – 2 O.D. 3 L N FLOW DIA. D 364HBM-2N 1/8 1/8 .15 .15 1.19 .60 .08 364HB-3N 364HB-3PP 3/16 3/16 .25 .25 1.49 .75 .12 364HB-4N 364HB-4PP 1/4 1/4 .32 .32 1.92 .96 .16 364HB-4-6N 1/4 3/8 .32 .44 1.92 1.18 .16 364HB-5N 364HB-5PP 5/16 5/16 .36 .36 2.22 1.17 .22 364HB-6-3N 364HB-6-3PP 3/8 3/16 .43 .24 2.23 1.04 .09 364HB-6-4N 364HB-6-4PP 3/8 1/4 .44 .32 1.92 1.18 .16 364HB-6N 364HB-6PP 3/8 3/8 .43 .43 2.22 1.18 .25 364HB-6-8N 364HB-6-8PP 3/8 1/2 .43 .56 2.22 1.27 .25 364HB-8-6N 364HB-8-6PP 1/2 3/8 .55 .43 2.52 1.27 .25 364HB-8N 364HB-8PP 1/2 1/2 .56 .56 2.52 1.27 .37 364HB-10N 364HB-10PP 5/8 5/8 .66 .66 2.74 1.37 .46 364HB-12N 3/4 3/4 .81 .81 2.98 1.50 .58 364HB-16N 1 1 1.06 1.06 3.10 1.55 .81 364HB-20N 1– 1/4 1– 1/4 1.25 1.25 5.29 2.64 1.00 364HB-24N 1–1/2 1–1/2 1.51 1.51 5.48 2.74 1.25 Union Elbow 365HB WHITE NYLON PART NO. BLACK POLYPROPYLENE PART NO. TUBE OR HOSE I.D. 1 TUBE OR HOSE I.D. 2 O.D. 1 O.D. 2 M N FLOW DIA. D 365HB-3N 365HB-3PP 3/16 3/16 .25 .25 .75 .75 .12 365HB-4N 365HB-4PP 1/4 1/4 .31 .31 1.13 1.13 .15 365HB-5N 365HB-5PP 5/16 5/16 .38 .37 1.19 1.19 .22 365HB-6N 365HB-6PP 3/8 3/8 .43 .43 1.26 1.26 .25 365HB-8-4N 365HB-8-4PP 1/2 1/4 .55 .31 1.26 1.24 .16 365HB-8-6N 365HB-8-6PP 1/2 3/8 .55 .43 1.26 1.27 .25 365HB-8N 365HB-8PP 1/2 1/2 .55 .55 1.26 1.26 .37 365HB-10N 365HB-10PP 5/8 5/8 .66 .66 1.37 1.37 .46 365HB-12N 365HB-12PP 3/4 3/4 .80 .80 1.48 1.48 .57 365HB-16N 1 1 1.07 1.07 1.50 1.50 .81 365HB-20N 1– 1/4 1– 1/4 1.25 1.25 2.63 2.63 1.00 365HB-24N 1–1/2 1–1/2 1.50 1.50 2.74 2.74 1.25 Hex Plug 318P WHITE NYLON PART NO. BLACK POLYPROPYLENE PART NO. NPT PIPE THREAD C HEX L 318P-2N 318P-2PP 1/8 7/16 .62 318P-4N 318P-4PP 1/4 9/16 .75 318P-6N 318P-6PP 3/8 11/16 .74 318P-8N 318P-8PP 1/2 7/8 .87 318P-12N 318P-12PP 3/4 1– 1/8 .86 318P-16N 318P-16PP 1 1– 3/8 1.05 318P-20N 318P-20PP 1–1/4 1–1/2 1.44 318P-24N 318P-24PP 1–1/2 1– 3/4 1.61 Reducer Bushing 309P WHITE NYLON PART NO. BLACK POLYPROPYLENE PART NO. EXTERNAL NPT PIPE THREAD INTERNAL NPT PIPE THREAD C HEX L 309P-4-2N 309P-4-2PP 1/4 1/8 9/16 .75 309P-6-2N 309P-6-2PP 3/8 1/8 11/16 .74 309P-6-4N 309P-6-4PP 3/8 1/4 11/16 .75 309P-8-2N 309P-8-2PP 1/2 1/8 7/8 .88 309P-8-4N 309P-8-4PP 1/2 1/4 7/8 .87 309P-8-6N 309P-8-6PP 1/2 3/8 7/8 .87 309P-12-2N 3/4 1/8 1– 1/8 .86 309P-12-4N 3/4 1/4 1– 1/8 .75 309P-12-6N 3/4 3/8 1– 1/8 .85 309P-12-8N 3/4 1/2 1– 1/8 .87 L D 2 1 L C HEX Parker Hannifin Corporation Fluid System Connectors Otsego, Michigan 18 Par-Barb® Thermoplastic Fittings Hex Nipple 316P WHITE NYLON PART NO. BLACK POLYPROPYLENE PART NO. NPT PIPE THREAD SIDE 1 NPT PIPE THREAD SIDE 2 C HEX L FLOW DIA. D 316P-2N 316P-2PP 1/8 1/8 7/16 .99 .22 316P-4-2N 316P-4-2PP 1/4 1/8 9/16 1.13 .22 316P-4N 316P-4PP 1/4 1/4 9/16 1.24 .31 316P-6-2N 316P-6-2PP 3/8 1/8 11/16 1.11 .22 316P-6-4N 316P-6-4PP 3/8 1/4 11/16 1.25 .31 316P-6N 316P-6PP 3/8 3/8 11/16 1.23 .43 316P-8-2N 316P-8-2PP 1/2 1/8 7/8 1.23 .22 316P-8-4N 316P-8-4PP 1/2 1/4 7/8 1.36 .31 316P-8-6N 316P-8-6PP 1/2 3/8 7/8 1.35 .43 316P-8N 316P-8PP 1/2 1/2 7/8 1.45 .59 316P-12-6N 316P-12-6PP 3/4 3/8 1– 1/8 1.36 .43 316P-12-8N 316P-12-8PP 3/4 1/2 1– 1/8 1.47 .59 316P-12N 316P-12PP 3/4 3/4 1– 1/8 1.48 .74 316P-16N 316P-16PP 1 1 1– 3/8 1.85 .98 Female Connector 326HB WHITE NYLON PART NO. BLACK POLYPROPYLENE PART NO. TUBE OR HOSE I.D. NPT PIPE THREAD O.D. C HEX L FLOW DIA. D 326HB-3-2N 326HB-3-2PP 3/16 1/8 .25 5/8 1.29 .12 326HB-3-4N 326HB-3-4PP 3/16 1/4 .25 3/4 1.31 .13 326HB-4-2N 326HB-4-2PP 1/4 1/8 .31 5/8 1.51 .16 326HB-4-4N 326HB-4-4PP 1/4 1/4 .31 3/4 1.52 .15 326HB-4-6N 326HB-4-6PP 1/4 3/8 .31 1 1.73 .15 326HB-4-8N 326HB-4-8PP 1/4 1/2 .31 1-1/8 1.74 .15 326HB-6-2N 326HB-6-2PP 3/8 1/8 .44 5/8 1.51 .25 326HB-6-4N 326HB-6-4PP 3/8 1/4 .43 3/4 1.52 .25 326HB-6-6N 326HB-6-6PP 3/8 3/8 .43 1 1.73 .25 326HB-6-8N 326HB-6-8PP 3/8 1/2 .43 1-1/8 1.74 .25 326HB-8-4N 326HB-8-4PP 1/2 1/4 .55 3/4 1.52 .37 326HB-8-6N 326HB-8-6PP 1/2 3/8 .55 1 1.74 .37 326HB-8-8N 326HB-8-8PP 1/2 1/2 .56 1– 1/8 1.74 .37 326HB-10-6N 326HB-10-6PP 5/8 3/8 .66 1 1.61 .46 326HB-10-8N 326HB-10-8PP 5/8 1/2 .66 1– 1/8 1.73 .46 326HB-12-8N 326HB-12-8PP 3/4 1/2 .80 1– 1/8 1.86 .62 326HB-12-12N 326HB-12-12PP 3/4 3/4 .80 1– 1/8 1.85 .62 Male Connector 325HB WHITE NYLON PART NO. BLACK POLYPROPYLENE PART NO. TUBE OR HOSE I.D. NPT PIPE THD. O.D. C HEX L FLOW DIA. D 325HB-3-2N 325HB-3-2PP 3/16 1/8 .25 7/16 1.49 .12 325HB-3-4N 325HB-3-4PP 3/16 1/4 .25 9/16 1.61 .13 325HB-4-2N 325HB-4-2PP 1/4 1/8 .31 7/16 1.50 .15 325HB-4-4N 325HB-4-4PP 1/4 1/4 .31 9/16 1.60 .16 325HB-4-6N 1/4 3/8 .31 11/16 1.62 .16 325HB-4-8N 325HB-4-8PP 1/4 1/2 .31 7/8 1.73 .15 325HB-4-12N 1/4 3/4 .31 1– 1/8 1.74 .16 325HB-5-2N 5/16 1/8 .37 7/16 1.50 .22 325HB-5-4N 5/16 1/4 .37 9/16 1.62 .22 325HB-5-6N 325HB-5-6PP 5/16 3/8 .37 11/16 1.60 .21 325HB-6-2N 325HB-6-2PP 3/8 1/8 .43 7/16 1.49 .25 325HB-6-4N 325HB-6-4PP 3/8 1/4 .43 9/16 1.62 .25 325HB-6-6N 325HB-6-6PP 3/8 3/8 .43 11/16 1.61 .25 325HB-6-8N 325HB-6-8PP 3/8 1/2 .43 7/8 1.73 .25 325HB-6-12N 325HB-6-12PP 3/8 3/4 .43 1– 1/8 1.72 .25 325HB-8-4N 325HB-8-4PP 1/2 1/4 .55 9/16 1.61 .35 325HB-8-6N 325HB-8-6PP 1/2 3/8 .55 11/16 1.60 .37 325HB-8-8N 325HB-8-8PP 1/2 1/2 .55 7/8 1.73 .37 325HB-8-12N 325HB-8-12PP 1/2 3/4 .55 1– 1/8 1.72 .37 325HB-10-6N 5/8 3/8 .66 11/16 1.61 .46 325HB-10-8N 325HB-10-8PP 5/8 1/2 .66 7/8 1.73 .46 325HB-10-12N 325HB-10-12PP 5/8 3/4 .67 1– 1/8 1.82 .46 325HB-12-8N 325HB-12-8PP 3/4 1/2 .80 7/8 1.86 .62 325HB-12-12N 325HB-12-12PP 3/4 3/4 .80 1– 1/8 1.85 .62 325HB-12-16N 3/4 1 .82 1– 3/8 2.35 .59 325HB-12-20N 3/4 1– 1/4 .86 1– 1/2 3.47 .59 325HB-12-24N 3/4 1– 1/2 .86 1– 3/4 3.66 .59 325HB-16-8N 1 1/2 1.08 1– 1/8 2.49 .77 325HB-16-12N 1 3/4 1.07 1– 1/8 2.30 .81 325HB-16-16N 1 1 1.07 1– 3/8 2.35 .81 325HB-16-20N 1 1– 1/4 1.11 1– 1/2 3.45 .78 325HB-16-24N 1 1– 1/2 1.11 1– 3/4 3.63 .78 325HB-20-20N 1– 1/4 1– 1/4 1.36 1– 1/2 3.47 1.04 325HB-20-24N 1– 1/4 1– 1/2 1.36 1– 3/4 3.64 1.04 325HB-24-20N 1– 1/2 1– 1/4 1.60 1– 1/2 3.45 1.28 325HB-24-24N 1– 1/2 1– 1/2 1.61 1– 3/4 3.63 1.28 L 1 2 D C HEX L O.D. D C HEX L O.D. D C HEX Parker Hannifin Corporation Fluid System Connectors Otsego, Michigan 19 Par-Barb® Thermoplastic Fittings Union Y 362HB WHITE NYLON PART NO. TUBE OR HOSE I.D. 1 & 2 TUBE OR HOSE I.D. 3 O.D. 1 & 2 O.D. 3 M N FLOW DIA. D 362HB-4N 1/4 1/4 .31 .31 1.13 1.13 .16 362HB-6N 3/8 3/8 .43 .43 1.25 1.40 .25 362HB-8N 1/2 1/2 .55 .55 1.25 1.50 .38 Male Branch Tee 372HB WHITE NYLON PART NO. BLACK POLYPROPYLENE PART NO. TUBE OR HOSE I.D. NPT PIPE THD. O.D. C HEX L N FLOW DIA. D 372HB-3-2N 3/16 1/8 .25 7/16 1.94 1.06 .13 372HB-3-4N 3/16 1/4 .24 9/16 1.93 1.17 .13 372HB-4-2N 372HB-4-2PP 1/4 1/8 .32 7/16 1.92 1.06 .16 372HB-4-4N 372HB-4-4PP 1/4 1/4 .32 9/16 1.92 1.16 .16 372HB-4-6N 372HB-4-6PP 1/4 3/8 .32 11/16 1.92 1.18 .16 372HB-6-4N 372HB-6-4PP 3/8 1/4 .43 9/16 2.22 1.18 .25 372HB-6-6N 372HB-6-6PP 3/8 3/8 .43 11/16 2.22 1.17 .25 372HB-6-8N 372HB-6-8PP 3/8 1/2 .43 7/8 2.22 1.29 .25 372HB-8-4N 372HB-8-4PP 1/2 1/4 .55 9/16 2.52 1.17 .37 372HB-8-6N 372HB-8-6PP 1/2 3/8 .56 11/16 2.52 1.17 .37 372HB-8-8N 372HB-8-8PP 1/2 1/2 .55 7/8 2.52 1.30 .37 372HB-12-12N 372HB-12-12PP 3/4 3/4 .81 1– 1/8 2.97 1.92 .58 372HB-16-8N 1 1/2 1.07 7/8 3.10 1.74 .81 372HB-16-12N 1 3/4 1.07 1– 1/8 3.10 1.92 .81 372HB-16-16N 1 1 1.07 1– 3/8 3.11 1.98 .81 Female Elbow 370HB WHITE NYLON PART NO. BLACK POLYPROPYLENE PART NO. TUBE OR HOSE I.D. NPT PIPE THD. O.D. C HEX M N FLOW DIA. D 370HB-4-2N 370HB-4-2PP 1/4 1/8 .31 5/8 1.19 1.07 .16 370HB-4-4N 370HB-4-4PP 1/4 1/4 .31 3/4 1.18 1.08 .16 370HB-4-6N 370HB-4-6PP 1/4 3/8 .31 1 1.16 1.30 .16 370HB-4-8N 370HB-4-8PP 1/4 1/2 .31 1– 1/8 1.18 1.30 .15 370HB-6-2N 370HB-6-2PP 3/8 1/8 .43 5/8 1.18 1.06 .25 370HB-6-4N 370HB-6-4PP 3/8 1/4 .44 3/4 1.18 1.06 .25 370HB-6-6N 370HB-6-6PP 3/8 3/8 .43 1 1.18 1.29 .25 370HB-6-8N 370HB-6-8PP 3/8 1/2 .43 1– 1/8 1.18 1.29 .25 370HB-8-4N 370HB-8-4PP 1/2 1/4 .55 3/4 1.25 1.22 .37 370HB-8-6N 370HB-8-6PP 1/2 3/8 .55 1 1.25 1.44 .37 370HB-8-8N 370HB-8-8PP 1/2 1/2 .55 1– 1/8 1.25 1.45 .37 370HB-8-12N 370HB-8-12PP 1/2 3/4 .55 1– 3/8 1.26 1.72 .37 370HB-12- 12N 370HB-12-12PP 3/4 3/4 .80 1– 3/8 1.38 1.84 .59 Male Elbow 329HB WHITE NYLON PART NO. BLACK POLYPROPYLENE PART NO. TUBE OR HOSE I.D. NPT PIPE THD. O.D. C HEX M N FLOW DIA. D 329HB-3-2N 329HB-3-2PP 3/16 1/8 .25 7/16 .76 1.06 .12 329HB-3-4N 3/16 1/4 .25 9/16 .76 1.17 .13 329HB-4-2N 329HB-4-2PP 1/4 1/8 .31 7/16 1.18 1.04 .16 329HB-4-4N 329HB-4-4PP 1/4 1/4 .31 9/16 1.18 1.16 .22 329HB-4-6N 329HB-4-6PP 1/4 3/8 .31 11/16 1.18 1.17 .15 329HB-4-8N 329HB-4-8PP 1/4 1/2 .32 7/8 1.18 1.30 .15 329HB-5-2N 5/16 1/8 .37 7/16 1.18 1.06 .22 329HB-6-2N 329HB-6-2PP 3/8 1/8 .43 7/16 1.18 1.05 .25 329HB-6-4N 329HB-6-4PP 3/8 1/4 .43 9/16 1.18 1.16 .25 329HB-6-6N 329HB-6-6PP 3/8 3/8 .43 11/16 1.17 1.17 .25 329HB-6-8N 329HB-6-8PP 3/8 1/2 .43 7/8 1.18 1.28 .25 329HB-8-4N 329HB-8-4PP 1/2 1/4 .55 9/16 1.27 1.16 .37 329HB-8-6N 329HB-8-6PP 1/2 3/8 .56 11/16 1.26 1.16 .37 329HB-8-8N 329HB-8-8PP 1/2 1/2 .55 7/8 1.25 1.29 .37 329HB-8-12N 329HB-8-12PP 1/2 3/4 .55 1– 1/8 1.30 1.89 .37 329HB-10-6N 5/8 3/8 .67 11/16 1.27 1.18 .47 329HB-10-8N 329HB-10-8PP 5/8 1/2 .68 7/8 1.30 1.73 .48 329HB-10-12N 329HB-10-12PP 5/8 3/4 .69 1– 1/8 1.32 1.92 .49 329HB-12-8N 329HB-12-8PP 3/4 1/2 .81 7/8 1.51 1.74 .58 329HB-12-12N 329HB-12-12PP 3/4 3/4 .81 1– 1/8 1.50 1.91 .58 329HB-12-16N 3/4 1 .82 1– 3/8 1.49 1.98 .58 329HB-12-20N 3/4 1– 1/4 .86 1– 1/2 1.52 2.39 .59 329HB-12-24N 3/4 1– 1/2 .85 1– 1/2 2.26 3.09 .59 329HB-16-8N 1 1/2 1.12 7/8 1.58 1.78 .86 329HB-16-12N 1 3/4 1.11 1– 1/8 1.58 1.93 .86 329HB-16-16N 1 1 1.08 1– 3/8 1.55 1.98 .81 329HB-16-20N 1 1– 1/4 1.12 1– 1/2 2.28 2.93 .84 329HB-16-24N 1 1– 1/2 1.12 1– 1/2 2.27 3.11 .84 329HB-20-20N 1– 1/4 1– 1/4 1.25 1– 1/2 2.63 2.94 1.00 329HB-20-24N 1– 1/4 1– 1/2 1.36 1– 1/2 2.63 3.11 1.08 329HB-24-20N 1– 1/2 1– 1/4 1.60 1– 1/2 2.77 2.93 1.30 329HB-24-24N 1– 1/2 1– 1/2 1.60 1– 1/2 2.77 3.10 1.30 L D O.D. O.D. N C HEX M N O.D. D C HEX M D O.D. C HEX N M N O.D. 3 O.D. 1 O.D. 2 D Parker Hannifin Corporation Fluid System Connectors Otsego, Michigan 20 Par-Barb® Thermoplastic Fittings Ball Nose Hose Barb Stem 328HB WHITE NYLON PART NO. BLACK POLYPROPYLENE PART NO. TUBE OR HOSE I.D. SWIVEL NUT NPT PIPE THREAD O.D. L FLOW DIA. D 328HB-4BN 328HB-4BPP 1/4 1/4 * .30 1.19 .19 328HB-4-8BN 328HB-4-8BPP 1/4 1/2 * .30 1.29 .15 328HB-6BN 328HB-6BPP 3/8 3/8 * .56 1.41 .25 328HB-8BN 328HB-8BPP 1/2 1/2 * .67 1.30 .37 *Use with hose barb swivel nut (31HB-XX) for desired NPT thread. Hose Barb Swivel Nut 31HB WHITE NYLON PART NO. BLACK POLYPROPYLENE PART NO. NPT PIPE THREAD C HEX L 31HB-4N 31HB-4PP 1/4 3/4 .62 31HB-6N 31HB-6PP 3/8 7/8 .63 31HB-8N 31HB-8PP 1/2 1– 1/16 .75 Male Garden Hose – Male Pipe Adapter 316GH WHITE NYLON PART NO. GARDEN HOSE THREAD NPT PIPE THREAD C HEX L FLOW DIA. D 316GH-12-6N 3/4 3/8 1– 1/8 1.33 .44 316GH-12-8N 3/4 1/2 1– 1/8 1.44 .59 316GH-12-12N 3/4 3/4 1– 1/8 1.48 .75 Male Garden Hose – Hose Barb 325GH WHITE NYLON PART NO. TUBE OR HOSE I.D. GARDEN HOSE THREAD O.D. C HEX L FLOW DIA. D 325GH-4-12N 1/4 3/4 .31 1– 1/8 1.70 .16 325GH-6-12N 3/8 3/4 .44 1– 1/8 1.69 .25 325GH-8-12N 1/2 3/4 .55 1– 1/8 1.68 .38 325GH-10-12N 5/8 3/4 .64 1– 1/8 1.70 .47 325GH-12-12N 3/4 3/4 .81 1– 1/8 1.70 .62 Garden Hose Swivel Hose Barb Stem 325GHSV WHITE NYLON PART NO. TUBE OR HOSE I.D. GARDEN HOSE THREAD O.D. L FLOW DIA. D 325GHSV-4-12BN+ 1/4 3/4 .31 1.16 .16 325GHSV-6-12BN+ 3/8 3/4 .44 1.17 .25 325GHSV-8-12BN+ 1/2 3/4 .56 1.17 .38 325GHSV-10-12BN+ 5/8 3/4 .64 1.18 .47 325GHSV-12-12BN+ 3/4 3/4 .81 1.18 .62 +Use with Garden Hose washer (30GH-12) and Garden Hose Nut (31GH-12N) Garden Hose Nut 31GH WHITE NYLON PART NO. GARDEN HOSE THREAD L DIA. N 31GH-12N 3/4 .74 1.38 Garden Hose Cap 313GH WHITE NYLON PART NO. GARDEN HOSE THREAD L DIA. N 313GH-12N** 3/4 .74 1.38 **Use with Garden Hose Washer (30GH-12) Garden Hose Washer 30GH WHITE TPE PART NO. GARDEN HOSE THREAD L 30GH-12 3/4 .13 L O.D. D L C HEX L D C HEX L O.D. D C HEX L O.D. D L N L N L Parker Hannifin Corporation Fluid System Connectors Otsego, Michigan 21 • Easy-to-use Push-to-Connect design, with audible “CLICK” upon connection • Push-button operation valved and non-valved options • Various port configurations available including NPT, BSPT, Hose Barb, and Bulkhead • Compact and lightweight ergonomic design • Resistant to many chemicals • Suitable for gas handling applications • FDA approved materials • 120 psi working pressure on all sizes push button shut off valve spring O-rings O-ring spring shut off valve *PPA couplers are not interchangeable with PPM and PPL couplers. PPM & PPL PPA* Quick Couplings Couplers – Male NPTF Thread PART NUMBER BODY SIZE PORT END VALVED OR NON-VALVED PPM-121-2MP 1/8 1/8 VALVED PPM-121-4MP 1/8 1/4 VALVED PPM-123-2MP 1/8 1/8 NON PPM-123-4MP 1/8 1/4 NON PPL-251-4MP 1/4 1/4 VALVED PPL-251-6MP 1/4 3/8 VALVED PPL-253-4MP 1/4 1/4 NON PPL-253-6MP 1/4 3/8 NON Couplers – Bulkhead Hose Barb with Nut, In-line PART NUMBER BODY SIZE HOSE BARB VALVED OR NON-VALVED PPM-121-H2HB 1/8 1/8 VALVED PPM-121-H3HB 1/8 3/16 VALVED PPM-121-H4HB 1/8 1/4 VALVED PPL-251-H4HB 1/4 1/4 VALVED PPL-251-H6HB 1/4 3/8 VALVED Couplers – Hose Barb, In-line PART NUMBER BODY SIZE HOSE BARB VALVED OR NON-VALVED PPM-121-2HB 1/8 1/8 VALVED PPM-121-3HB 1/8 3/16 VALVED PPM-121-4HB 1/8 1/4 VALVED PPM-123-2HB 1/8 1/8 NON PPM-123-3HB 1/8 3/16 NON PPM-123-4HB 1/8 1/4 NON PPL-251-4HB 1/4 1/4 VALVED PPL-251-5HB 1/4 5/16 VALVED PPL-251-6HB 1/4 3/8 VALVED PPL-253-4HB 1/4 1/4 NON PPL-253-5HB 1/4 5/16 NON PPL-253-6HB 1/4 3/8 NON PPA-251-4HB 1/4 1/4 VALVED PPA-251-6HB 1/4 3/8 VALVED PPA-253-4HBSB 1/4 1/4 NON PPA-253-6HBSB 1/4 3/8 NON Parker Hannifin Corporation Fluid System Connectors Otsego, Michigan 22 Quick Couplings PPM & PPL PPA* Nipples – Hose Barb, 90° PART NUMBER BODY SIZE HOSE BARB VALVED OR NON-VALVED PPM-122-C2HB 1/8 1/8 VALVED PPM-122-C4HB 1/8 1/4 VALVED PPM-124-C2HB 1/8 1/8 NON PPM-124-C4HB 1/8 1/4 NON PPL-252-C4HB 1/4 1/4 VALVED PPL-252-C6HB 1/4 3/8 VALVED PPL-254-C4HB 1/4 1/4 NON PPL-254-C6HB 1/4 3/8 NON Nipples – Panel Mount Hose Barb, In-line PART NUMBER BODY SIZE HOSE BARB VALVED OR NON-VALVED PPM-122-H2HB 1/8 1/8 VALVED PPM-122-H3HB 1/8 3/16 VALVED PPM-122-H4HB 1/8 1/4 VALVED PPM-124-H3HB 1/8 3/16 NON PPL-252-H4HB 1/4 1/4 VALVED PPL-252-H6HB 1/4 3/8 VALVED Nipples – Male NPTF Thread PART NUMBER BODY SIZE PORT END VALVED OR NON-VALVED PPM-122-2MP 1/8 1/8 VALVED PPM-122-4MP 1/8 1/4 VALVED PPM-124-2MP 1/8 1/8 NON PPM-124-4MP 1/8 1/4 NON PPL-252-4MP 1/4 1/4 VALVED PPL-252-6MP 1/4 3/8 VALVED PPL-254-4MP 1/4 1/4 NON PPL-254-6MP 1/4 3/8 NON Nipples – Hose Barb, In-line PART NUMBER BODY SIZE HOSE BARB VALVED OR NON-VALVED PPM-122-2HB 1/8 1/8 VALVED PPM-122-3HB 1/8 3/16 VALVED PPM-122-4HB 1/8 1/4 VALVED PPM-124-2HB 1/8 1/8 NON PPM-124-3HB 1/8 3/16 NON PPM-124-4HB 1/8 1/4 NON PPL-252-4HB 1/4 1/4 VALVED PPL-252-5HB 1/4 5/16 VALVED PPL-252-6HB 1/4 3/8 VALVED PPL-254-4HB 1/4 1/4 NON PPL-254-5HB 1/4 5/16 NON PPL-254-6HB 1/4 3/8 NON PPA-252-4HB 1/4 1/4 VALVED PPA-252-6HB 1/4 3/8 VALVED PPA-254-4HB 1/4 1/4 NON PPA-254-6HB 1/4 3/8 NON Parker Hannifin Corporation Fluid System Connectors Otsego, Michigan 23 A B E C D Tube 2 Tube 1 A D E B C B A D C F E A B C D E VFE – Valve Female Elbow PART NUMBER NOM. TUBE O.D. NPTF THREAD SIZE A B C D ØE THRU HOLE MIN. LFPP4VFE2 1/4 1/8 1.74 1.21 1.82 0.92 .19 LFPP4VFE4 1/4 1/4 1.74 1.21 2.05 1.15 .19 LFPP4VFE6 1/4 3/8 1.74 1.21 2.18 1.28 .19 LFPP6VFE2 3/8 1/8 1.85 1.32 1.82 0.92 .25 LFPP6VFE4 3/8 1/4 1.85 1.32 2.05 1.15 .25 LFPP6VFE6 3/8 3/8 1.85 1.32 2.18 1.28 .25 VUC – Valve Union Connector PART NUMBER 1 TUBE SIZE 2 TUBE SIZE A B C D ØE THRU HOLE MIN. LFPP4VUC4 1/4 1/4 2.55 1.22 1.0 0.5 .19 LFPP4VUC6 1/4 3/8 2.57 1.30 1.0 0.5 .19 LFPP6VUC6 3/8 3/8 2.67 1.32 1.4 0.5 .25 A B E C D VMC – Valve Male Connector PART NUMBER NOM. TUBE O.D. NPTF THREAD SIZE A B C D ØE THRU HOLE MIN. LFPP4VMC2 1/4 1/8 2.22 1.21 1.4 0.5 .19 LFPP4VMC4 1/4 1/4 2.40 1.21 1.4 0.5 .19 LFPP4VMC6 1/4 3/8 2.40 1.21 1.4 0.5 .19 LFPP4VMC8 1/4 1/2 2.59 1.21 1.4 0.5 .19 LFPP6VMC2 3/8 1/8 2.33 1.32 1.4 0.5 .25 LFPP6VMC4 3/8 1/4 2.51 1.32 1.4 0.5 .25 LFPP6VMC6 3/8 3/8 2.51 1.32 1.4 0.5 .25 LFPP6VMC8 3/8 1/2 2.70 1.32 1.4 0.5 .25 A B E C D VFC – Valve Female Connector PART NUMBER NOM. TUBE O.D. NPTF THREAD SIZE A B C D ØE THRU HOLE MIN. LFPP4VFC2 1/4 1/8 2.04 1.21 1.4 0.5 .19 LFPP4VFC4 1/4 1/4 2.27 1.21 1.4 0.5 .19 LFPP4VFC6 1/4 3/8 2.40 1.21 1.4 0.5 .19 LFPP6VFC2 3/8 1/8 2.15 1.32 1.4 0.5 .25 LFPP6VFC4 3/8 1/4 2.38 1.32 1.4 0.5 .25 LFPP6VFC6 3/8 3/8 2.51 1.32 1.4 0.5 .25 VEU – Valve Elbow Union PART NUMBER 1 TUBE SIZE 2 TUBE SIZE A B C D ØE THRU HOLE MIN. LFPP4VEU4 1/4 1/4 1.75 1.22 2.33 1.42 .19 LFPP4VEU6 1/4 3/8 1.75 1.22 2.33 1.42 .11 LFPP6VEU4 3/8 1/4 1.83 1.30 2.32 1.40 .19 LFPP6VEU6 3/8 3/8 1.85 1.32 2.34 1.44 .25 VAS – Valve Angle Stop PART NUMBER TUBE O.D. MALE THREAD FEMALE THREAD A B C D E F LFPP4VAS6 1/4 3/8 3/8 1.95 1.24 2.17 1.11 1.41 .91 LFPP4VAS8 1/4 3/8 1/2 1.95 1.24 2.40 1.11 1.41 .91 LFPP6VAS6 3/8 3/8 3/8 2.06 1.35 2.17 1.11 1.41 .91 LFPP6VAS8 3/8 3/8 1/2 2.06 1.35 2.40 1.11 1.41 .91 LIQUIfit™ Ball Valves A B E D C VME – Valve Male Elbow PART NUMBER NOM. TUBE O.D. NPTF THREAD SIZE A B C D ØE THRU HOLE MIN. LFPP4VME2 1/4 1/8 1.74 1.21 2.00 1.10 .19 LFPP4VME4 1/4 1/4 1.74 1.21 2.18 1.28 .19 LFPP4VME6 1/4 3/8 1.74 1.21 2.18 1.28 .19 LFPP4VME8 1/4 1/2 1.74 1.21 2.37 1.47 .19 LFPP6VME2 3/8 1/8 1.85 1.32 2.00 1.10 .25 LFPP6VME4 3/8 1/4 1.85 1.32 2.18 1.28 .25 LFPP6VME6 3/8 3/8 1.85 1.32 2.18 1.28 .25 LFPP6VME8 3/8 1/2 1.85 1.32 2.37 1.47 .25 • Engineered EPDM D Seal increases seal compression on tube • Full flow self cleaning ball • High-temperature, scale-resistant Polysulfone ball • Glass-reinforced Polypropylene body • FDA compliant low profile handle EPDM D seal stainless gripping r – NSF 51 – ing self cleaning ball Parker Hannifin Corporation Fluid System Connectors Otsego, Michigan 24 (+) Non Standard. VFE – Valve Female Elbow PART NUMBER NOM. TUBE O.D. NPTF THREAD SIZE A B C D ØE THRU HOLE MIN. PP4VFE2-MG (+) 1/4 1/8 1.74 1.21 1.82 0.92 .19 PP4VFE4-MG 1/4 1/4 1.74 1.21 2.05 1.15 .19 PP4VFE6-MG 1/4 3/8 1.74 1.21 2.18 1.28 .19 PP6VFE2-MG (+) 3/8 1/8 1.85 1.32 1.82 0.92 .25 PP6VFE4-MG 3/8 1/4 1.85 1.32 2.05 1.15 .25 PP6VFE6-MG 3/8 3/8 1.85 1.32 2.18 1.28 .25 A B C D E NOTE: PP refers to Polypropylene. FCB refers to Fluorocarbon. • Engineered EPDM O-ring increases seal compression on tube • Full flow self cleaning ball • High-temperature, scale-resistant Polysulfone ball • Glass-reinforced Polypropylene body • FDA compliant low profile handle full flow all plastic body collet self cleaning ball O-rings – NSF 51 – VUC – Valve Union Connector PART NUMBER 1 TUBE SIZE 2 TUBE SIZE A B C D ØE THRU HOLE MIN. PP4VUC4-MG 1/4 1/4 2.55 1.22 1.0 0.5 .19 PP4VUC6-MG 1/4 3/8 2.55 1.22 1.0 0.5 .19 PP6VUC4-MG 3/8 1/4 2.57 1.30 1.0 0.5 .19 PP6VUC6-MG 3/8 3/8 2.67 1.32 1.4 0.5 .25 A B E C D Tube 2 Tube 1 A D E B C VEU – Valve Elbow Union PART NUMBER 1 TUBE SIZE 2 TUBE SIZE A B C D ØE THRU HOLE MIN. PP4VEU4-MG 1/4 1/4 1.75 1.22 2.33 1.42 .19 PP4VEU6-MG 1/4 3/8 1.75 1.22 2.33 1.42 .11 PP6VEU4-MG 3/8 1/4 1.83 1.30 2.32 1.40 .19 PP6VEU6-MG 3/8 3/8 1.85 1.32 2.34 1.44 .25 VFC – Valve Female Connector PART NUMBER NOM. TUBE O.D. NPTF THREAD SIZE A B C D ØE THRU HOLE MIN. PP4VFC2-MG 1/4 1/8 2.04 1.21 1.4 0.5 .19 PP4VFC4-MG 1/4 1/4 2.27 1.21 1.4 0.5 .19 PP4VFC6-MG 1/4 3/8 2.40 1.21 1.4 0.5 .19 PP6VFC2-MG 3/8 1/8 2.15 1.32 1.4 0.5 .25 PP6VFC4-MG 3/8 1/4 2.38 1.32 1.4 0.5 .25 PP6VFC6-MG 3/8 3/8 2.51 1.32 1.4 0.5 .25 A B E C D TrueSeal™ Ball Valves Parker Hannifin Corporation Fluid System Connectors Otsego, Michigan 25 TrueSeal™ Ball Valves Tube O.D. C A B D Thru Hole VTEU – Valve Tube Elbow Union PART NUMBER NOM. TUBE O.D. STEM A B C D ØE THRU HOLE MIN. PP4VTEU6-MG 1/4 3/8 1.75 1.22 2.43 1.50 .17 PP6VTEU6-MG 3/8 3/8 1.83 1.30 2.43 1.50 .25 TrueSeal Check Valves Push-to-Connect check valves that ensures protection against reversal of flow. The valves have an arrow molded into the body to indicate the direction of flow. Valves are designed for connection with either thermoplastic or soft metal tubing and are intended for use with liquids only. Materials of Construction Body: Acetal O-ring: EPDM Metal Grip Edge: 300 Stainless Working Pressure Up to 150 PSI depending on tubing being used Temperature Range +34°F (1° C) to +150°F (65°C) Cracking Pressure 1/3 PSI VC – Check Valve PART NO. TUBE SIZE L O.D. A4VC4-MG 1/4 2.00 .66 A5VC5-MG 5/16 2.10 .70 A6VC6-MG 3/8 2.15 .80 L O.D. VMC – Valve Male Connector PART NUMBER NOM. TUBE O.D. NPTF THREAD SIZE A B C D ØE THRU HOLE MIN. PP4VMC2-MG (+) 1/4 1/8 2.22 1.21 1.4 0.5 .19 PP4VMC4-MG 1/4 1/4 2.40 1.21 1.4 0.5 .19 PP4VMC6-MG 1/4 3/8 2.40 1.21 1.4 0.5 .19 PP4VMC8-MG (+) 1/4 1/2 2.59 1.21 1.4 0.5 .19 PP6VMC2-MG (+) 3/8 1/8 2.33 1.32 1.4 0.5 .25 PP6VMC4-MG 3/8 1/4 2.51 1.32 1.4 0.5 .25 PP6VMC6-MG 3/8 3/8 2.51 1.32 1.4 0.5 .25 PP6VMC8-MG (+) 3/8 1/2 2.70 1.32 1.4 0.5 .25 A B E C D A B E D C VME – Valve Male Elbow PART NUMBER NOM. TUBE O.D. NPTF THREAD SIZE A B C D ØE THRU HOLE MIN. PP4VME2-MG (+) 1/4 1/8 1.74 1.21 2.00 1.10 .19 PP4VME4-MG 1/4 1/4 1.74 1.21 2.18 1.28 .19 PP4VME6-MG 1/4 3/8 1.74 1.21 2.18 1.28 .19 PP4VME8-MG (+) 1/4 1/2 1.74 1.21 2.37 1.47 .19 PP6VME2-MG (+) 3/8 1/8 1.85 1.32 2.00 1.10 .25 PP6VME4-MG 3/8 1/4 1.85 1.32 2.18 1.28 .25 PP6VME6-MG 3/8 3/8 1.85 1.32 2.18 1.28 .25 PP6VME8-MG 3/8 1/2 1.85 1.32 2.37 1.47 .25 Parker Hannifin Corporation Fluid System Connectors Otsego, Michigan 26 Female Flare Connector PART NUMBER TUBE O.D. THREAD L66PLNF-4-4 1/4 7/16-20 L66PLNF-6-4 3/8 7/16-20 L66PLNF-6-6 3/8 5/8-18 Female Garden Hose Swivel PART NUMBER TUBE O.D. THREAD L66PLNGHSV-4-12 1/4 3/4 L66PLNGHSV-6-12 3/8 3/4 • Seal materials: EPDM • Meets California and Vermont <0.25% lead requirements • Additional configurations available for each type shown • Custom products available Low-lead Brass 45° Flare-Male NPTF Connector PART NUMBER TUBE O.D. THREAD L48F-4-4 1/4 1/4 L48F-6-4 3/8 1/4 L48F-6-6 3/8 3/8 L48F-6-8 3/8 1/2 L48F-8-8 1/2 1/2 L48F-10-6 5/8 3/8 L48F-10-8 5/8 1/2 L48F-10-12 5/8 3/4 45° Flare-Male NPTF Elbow PART NUMBER TUBE O.D. THREAD L249F-6-4 3/8 1/4 L249F-6-6 3/8 3/8 L249F-6-8 3/8 1/2 L249F-8-4 1/2 1/4 L249F-8-6 1/2 3/8 L249F-10-6 5/8 3/8 L249F-10-8 5/8 1/2 Parker Hannifin Corporation Fluid System Connectors Otsego, Michigan 27 (+) Non Standard. TS – Tube Supports NYLON PART NUMBER POLYPROPYLENE PART NUMBER N4TS3 P4TS3 N5TS3 P5TS3 N6TS4 P6TS4 N8TS6 P8TS6 To be used with soft durometer tubing. 6300 – Carstick® Cartridges PART NUMBER TUBE O.D. 6300 56 00 1/4 6300 60 00 3/8 6300 62 00 1/2 3130 – Tamper Resistant Locking Clip for LIQUIfit Fractional Inch TUBE O.D. PART NUMBER (BLACK) PART NUMBER (GREEN) PART NUMBER (RED) PART NUMBER (BLUE) PART NUMBER (YELLOW) PART NUMBER (WHITE) 1/4 3130 56 01 (+) 3130 56 02 (+) 3130 56 03 3130 56 04 (+) 3130 56 05 (+) 3130 56 10 (+) 5/16 3130 08 01 (+) 3130 08 02 (+) 3130 08 03 3130 08 04 (+) 3130 08 05 (+) 3130 08 10 (+) 3/8 3130 60 01 (+) 3130 60 02 (+) 3130 60 03 3130 60 04 (+) 3130 60 05 (+) 3130 60 10 (+) 1/2 3130 62 01 (+) 3130 62 02 (+) 3130 62 03 3130 62 04 (+) 3130 62 05 (+) 3130 62 10 (+) Metric TUBE O.D. PART NUMBER (BLACK) PART NUMBER (GREEN) PART NUMBER (RED) PART NUMBER (BLUE) PART NUMBER (YELLOW) PART NUMBER (WHITE) 6 3130 06 01 (+) 3130 06 02 (+) 3130 06 03 3130 06 04 (+) 3130 06 05 (+) 3130 06 10 (+) 8 3130 08 01 (+) 3130 08 02 (+) 3130 08 03 3130 08 04 (+) 3130 08 05 (+) 3130 08 10 (+) 10 3130 10 01 (+) 3130 10 02 (+) 3130 10 03 3130 10 04 (+) 3130 10 05 (+) 3130 10 10 (+) 12 3130 12 01 (+) 3130 12 02 (+) 3130 12 03 3130 12 04 (+) 3130 12 05 (+) 3130 12 10 (+) SC – Safety Clip for TrueSeal PART NUMBER FOR NOMINAL TUBE O.D. SC-4 1/4 SC-5 5/16 SC-6 3/8 SC-8 1/2 TSC – Cartridge Insert PART NUMBER WITH EPDM SEAL NOM. TUBE O.D. A* DIAMETER ±002 B DIAMETER ±003 C DIAMETER ±003 D DIAMETER MAXIMUM E DEPTH ±002 F DEPTH ±002 G DEPTH ±002 H* CENTERLINE OF PORTS MINIMUM ATSC4-MG 1/4 .528 .421 .260 .19 .230 .435 .600 .670 ATSC6-MG 3/8 .632 .545 .385 .31 .280 .455 .705 .790 ATSC8-MG 1/2 .774 .668 .510 .41 .315 .510 .810 1.250 C onnect 1 assemble clip 2 connect tube D isconnect 1 cut clip 2 remove clip 3 release tube Temperature Range: from -20°C to +150°C / -4°F to +302°F Fluid Compatibility: air, grease, cleaning agents Materials: polyamide 6-6 reinforced with fiberglass Accessories Parker Hannifin Corporation Fluid System Connectors Otsego, Michigan 28 Polyethylene PART NUMBER PART NUMBER TUBE O.D. TUBE I.D. AVERAGE WALL THICKNESS WORKING PRESSURE AT 73°F / 23°C MINIMUM BURST AT 73°F / 23°C PACKAGE QUANTITY MINIMUM BEND RADIUS WEIGHT NATURAL BLACK INCH MM INCH MM INCH MM PSI BAR PSI BAR FOOT INCH MM LBS/FT LBS/MTR E-43-X-XXXX EB-43-X-XXXX 1/4 6.4 .170 4.3 .040 1.0 120 8.3 480 33.1 0100, 0500, 1000 1.00 25.4 .011 .016 E-53-X-XXXX EB-53-X-XXXX 5/16 7.9 .187 4.8 .062 1.6 145 10.0 580 40.0 0100, 0500 1.13 28.7 .020 .030 E-64-X-XXXX EB-64-X-XXXX 3/8 9.5 .250 6.4 .062 1.6 125 8.6 500 34.5 0100, 0500 1.25 31.8 .025 .037 E-86-X-XXXX EB-86-X-XXXX 1/2 12.7 .375 9.5 .062 1.6 90 6.2 360 24.8 0100, 0500 2.50 63.5 .034 .051 E-108-X-XXXX EB-108-X-XXXX 5/8 15.9 .500 12.7 .062 16 70 4.8 280 19.3 0100 4.00 101.6 .044 .065 Standard black is not NSF approved. COLOR CODE – Natural – Black B Blue G Green O Orange P Purple R Red GRA Gray Y Yellow WHT White Available in black as well as nine other colors, as recommended by the Instrument Society of America. LIQUIfit™ Tubing Features • Made from 100% virgin resin material • Chemically resistant and flexible. • High molecular weight resin provides increased dimensional stability, uniformity and long-term strength. • Economical system solution Certifications • FDA compliant for food contact • ASTM D-1693 (10% IGEPAL) for stress crack resistance • NSF – 51 • NSF – 61 E 64 Y 0500 Polyethylene Tube OD Tube ID Color Package Quantity (in sixteenths of an inch) (in inches) (Omit for Natural and Black) (in feet) E-64-Y-0500 – Natural Polyethylene EB-64-Y-0500 – Black Polyethylene Parker Hannifin Corporation Fluid System Connectors Otsego, Michigan 29 LIQUIfit™ Tubing – Metric Polyethylene PART NUMBER PART NUMBER TUBE O.D. TUBE I.D. AVERAGE WALL THICKNESS WORKING PRESSURE AT 73°F / 23°C MINIMUM BURST AT 73°F / 23°C PACKAGE QUANTITY MINIMUM BEND RADIUS WEIGHT NATURAL BLACK MM INCH MM INCH MM INCH BAR PSI BAR PSI FOOT MM INCH KG/MTR LBS/FT E-6X1-0100 EB-6X1-0100 6 .236 4 .157 1.00 .039 8.6 125 34.5 500 0100 25 1.00 .019 .013 E-8X1-0100 EB-8X1-0100 8 .315 6 .236 1.00 .039 6.9 100 27.6 400 0100 38 1.50 .021 .014 E-10X1.5-0100 EB-10X1.5-0100 10 .393 7 .276 1.50 .059 8.6 125 34.5 500 0100 38 1.50 .039 .026 E-12X1.5-0100 EB-12X1.5-0100 12 .472 9 .354 1.50 .059 6.2 100 24.8 400 0100 63 2.50 .048 .032 Standard black is not NSF approved. COLORS Natural Black Features • Made from 100% virgin resin material • Chemically resistant and flexible. • High molecular weight resin provides increased dimensional stability, uniformity and long-term strength. • Economical system solution Certifications • FDA compliant for food contact • ASTM D-1693 (10% IGEPAL) for stress crack resistance • NSF – 51 • NSF – 61 E 8×1 0500 Metric Polyethylene Tube OD Tube Wall Thickness Package Quantity (in millimeters) (in millimeters) (in feet) Parker Hannifin Corporation Fluid System Connectors Otsego, Michigan 30 Offer of Sale 1/09 The items described in this document and other documents and descriptions provided by Parker Hannifin Corporation, its subsidiaries and its authorized distributors (“Seller”) are hereby offered for sale at prices to be established by Seller. This offer and its acceptance by any customer (“Buyer”) shall be governed by all of the following Terms and Conditions. Buyer’s order for any item described in its document, when communicated to Seller verbally, or in writing, shall constitute acceptance of this offer. All goods or work described will be referred to as “Products”. 1. Terms and Conditions. Seller’s willingness to offer Products, or accept an order for Products, to or from Buyer is expressly conditioned on Buyer’s assent to these Terms and Conditions and to the terms and conditions found on-line at www.parker. com/saleterms/. Seller objects to any contrary or additional term or condition of Buyer’s order or any other document issued by Buyer. 2. Price Adjustments; Payments. Prices stated on the reverse side or preceding pages of this document are valid for 30 days. After 30 days, Seller may change prices to reflect any increase in its costs resulting from state, federal or local legislation, price increases from its suppliers, or any change in the rate, charge, or classification of any carrier. The prices stated on the reverse or preceding pages of this document do not include any sales, use, or other taxes unless so stated specifically. Unless otherwise specified by Seller, all prices are F.O.B. Seller’s facility, and payment is due 30 days from the date of invoice. After 30 days, Buyer shall pay interest on any unpaid invoices at the rate of 1.5% per month or the maximum allowable rate under applicable law. 3. Delivery Dates; Title and Risk; Shipment. All delivery dates are approximate and Seller shall not be responsible for any damages resulting from any delay. Regardless of the manner of shipment, title to any products and risk of loss or damage shall pass to Buyer upon tender to the carrier at Seller’s facility (i.e., when it’s on the truck, it’s yours). Unless otherwise stated, Seller may exercise its judgment in choosing the carrier and means of delivery. No deferment of shipment at Buyers’ request beyond the respective dates indicated will be made except on terms that will indemnify, defend and hold Seller harmless against all loss and additional expense. Buyer shall be responsible for any additional shipping charges incurred by Seller due to Buyer’s changes in shipping, product specifications or in accordance with Section 13, herein. 4. Warranty. Seller warrants that the Products sold hereunder shall be free from defects in material or workmanship for a period of twelve months from the date of delivery to Buyer or 2,000 hours of normal use, whichever occurs first. This warranty is made only to Buyer and does not extend to anyone to whom Products are sold after purchased from Seller. The prices charged for Seller’s products are based upon the exclusive limited warranty stated above, and upon the following disclaimer: DISCLAIMER OF WARRANTY: THIS WARRANTY COMPRISES THE SOLE AND ENTIRE WARRANTY PERTAINING TO PRODUCTS PROVIDED HEREUNDER. SELLER DISCLAIMS ALL OTHER WARRANTIES, EXPRESS AND IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 5. Claims; Commencement of Actions. Buyer shall promptly inspect all Products upon delivery. No claims for shortages will be allowed unless reported to the Seller within 10 days of delivery. No other claims against Seller will be allowed unless asserted in writing within 60 days after delivery or, in the case of an alleged breach of warranty, within 30 days after the date within the warranty period on which the defect is or should have been discovered by Buyer. Any action based upon breach of this agreement or upon any other claim arising out of this sale (other than an action by Seller for any amount due to Seller from Buyer) must be commenced within thirteen months from the date of tender of delivery by Seller or, for a cause of action based upon an alleged breach of warranty, within thirteen months from the date within the warranty period on which the defect is or should have been discovered by Buyer. 6. LIMITATION OF LIABILITY. UPON NOTIFICATION, SELLER WILL, AT ITS OPTION, REPAIR OR REPLACE A DEFECTIVE PRODUCT, OR REFUND THE PURCHASE PRICE. IN NO EVENT SHALL SELLER BE LIABLE TO BUYER FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF, OR AS THE RESULT OF, THE SALE, DELIVERY, NONDELIVERY, SERVICING, USE OR LOSS OF USE OF THE PRODUCTS OR ANY PART THEREOF, OR FOR ANY CHARGES OR EXPENSES OF ANY NATURE INCURRED WITHOUT SELLER’S WRITTEN CONSENT, EVEN IF SELLER HAS BEEN NEGLIGENT, WHETHER IN CONTRACT, TORT OR OTHER LEGAL THEORY. IN NO EVENT SHALL SELLER’S LIABILITY UNDER ANY CLAIM MADE BY BUYER EXCEED THE PURCHASE PRICE OF THE PRODUCTS. 7. Contingencies. Seller shall not be liable for any default or delay in performance if caused by circumstances beyond the reasonable control of Seller. 8. User Responsibility. The user, through its own analysis and testing, is solely responsible for making the final selection of the system and Product and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application and follow applicable industry standards and Product information. If Seller provides Product or system options, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the Products or systems. 9. Loss to Buyer’s Property. Any designs, tools, patterns, materials, drawings, confidential information or equipment furnished by Buyer or any other items which become Buyer’s property, may be considered obsolete and may be destroyed by Seller after two consecutive years have elapsed without Buyer placing an order for the items which are manufactured using such property. Seller shall not be responsible for any loss or damage to such property while it is in Seller’s possession or control. 10. Special Tooling. A tooling charge may be imposed for any special tooling, including without limitation, dies, fixtures, molds and patterns, acquired to manufacture Products. Such special tooling shall be and remain Seller’s property notwithstanding payment of any charges by Buyer. In no event will Buyer acquire any interest in apparatus belonging to Seller which is utilized in the manufacture of the Products, even if such apparatus has been specially converted or adapted for such manufacture and notwithstanding any charges paid by Buyer. Unless otherwise agreed, Seller shall have the right to alter, discard or otherwise dispose of any special tooling or other property in its sole discretion at any time. 11. Buyer’s Obligation; Rights of Seller. To secure payment of all sums due or otherwise, Seller shall retain a security interest in the goods delivered and this agreement shall be deemed a Security Agreement under the Uniform Commercial Code. Buyer authorizes Seller as its attorney to execute and file on Buyer’s behalf all documents Seller deems necessary to perfect its security interest. Seller shall have a security interest in, and lien upon, any property of Buyer in Seller’s possession as security for the payment of any amounts owed to Seller by Buyer. 12. Improper use and Indemnity. Buyer shall indemnify, defend, and hold Seller harmless from any claim, liability, damages, lawsuits, and costs (including attorney fees), whether for personal injury, property damage, patent, trademark or copyright infringement or any other claim, brought by or incurred by Buyer, Buyer’s employees, or any other person, arising out of: (a) improper selection, improper application or other misuse of Products purchased by Buyer from Seller; (b) any act or omission, negligent or otherwise, of Buyer; (c) Seller’s use of patterns, plans, drawings, or specifications furnished by Buyer to manufacture Product; or (d) Buyer’s failure to comply with these terms and conditions. Seller shall not indemnify Buyer under any circumstance except as otherwise provided. 13. Cancellations and Changes. Orders shall not be subject to cancellation or change by Buyer for any reason, except with Seller’s written consent and upon terms that will indemnify, defend and hold Seller harmless against all direct, incidental and consequential loss or damage. Seller may change product features, specifications, designs and availability with notice to Buyer. 14. Limitation on Assignment. Buyer may not assign its rights or obligations under this agreement without the prior written consent of Seller. 15. Entire Agreement. This agreement contains the entire agreement between the Buyer and Seller and constitutes the final, complete and exclusive expression of the terms of the agreement. All prior or contemporaneous written or oral agreements or negotiations with respect to the subject matter are herein merged. 16. Waiver and Severability. Failure to enforce any provision of this agreement will not waive that provision nor will any such failure prejudice Seller’s right to enforce that provision in the future. Invalidation of any provision of this agreement by legislation or other rule of law shall not invalidate any other provision herein. The remaining provisions of this agreement will remain in full force and effect. 17. Termination. This agreement may be terminated by Seller for any reason and at any time by giving Buyer thirty (30) days written notice of termination. In addition, Seller may by written notice immediately terminate this agreement for the following: (a) Buyer commits a breach of any provision of this agreement (b) the appointment of a trustee, receiver or custodian for all or any part of Buyer’s property (c) the filing of a petition for relief in bankruptcy of the other Party on its own behalf, or by a third party (d) an assignment for the benefit of creditors, or (e) the dissolution or liquidation of the Buyer. 18. Governing Law. This agreement and the sale and delivery of all Products hereunder shall be deemed to have taken place in and shall be governed and construed in accordance with the laws of the State of Ohio, as applicable to contracts executed and wholly performed therein and without regard to conflicts of laws principles. Buyer irrevocably agrees and consents to the exclusive jurisdiction and venue of the courts of Cuyahoga County, Ohio with respect to any dispute, controversy or claim arising out of or relating to this agreement. Disputes between the parties shall not be settled by arbitration unless, after a dispute has arisen, both parties expressly agree in writing to arbitrate the dispute. 19. Indemnity for Infringement of Intellectual Property Rights. Seller shall have no liability for infringement of any patents, trademarks, copyrights, trade dress, trade secrets or similar rights except as provided in this Section. Seller will defend and indemnify Buyer against allegations of infringement of U.S. patents, U.S. trademarks, copyrights, trade dress and trade secrets (“Intellectual Property Rights”). Seller will defend at its expense and will pay the cost of any settlement or damages awarded in an action brought against Buyer based on an allegation that a Product sold pursuant to this Agreement infringes the Intellectual Property Rights of a third party. Seller’s obligation to defend and indemnify Buyer is contingent on Buyer notifying Seller within ten (10) days after Buyer becomes aware of such allegations of infringement, and Seller having sole control over the defense of any allegations or actions including all negotiations for settlement or compromise. If a Product is subject to a claim that it infringes the Intellectual Property Rights of a third party, Seller may, at its sole expense and option, procure for Buyer the right to continue using the Product, replace or modify the Product so as to make it noninfringing, or offer to accept return of the Product and return the purchase price less a reasonable allowance for depreciation. Notwithstanding the foregoing, Seller shall have no liability for claims of infringement based on information provided by Buyer, or directed to Products delivered hereunder for which the designs are specified in whole or part by Buyer, or infringements resulting from the modification, combination or use in a system of any Product sold hereunder. The foregoing provisions of this Section shall constitute Seller’s sole and exclusive liability and Buyer’s sole and exclusive remedy for infringement of Intellectual Property Rights. 20. Taxes. Unless otherwise indicated, all prices and charges are exclusive of excise, sales, use, property, occupational or like taxes which may be imposed by any taxing authority upon the manufacture, sale or delivery of Products. 21. Equal Opportunity Clause. For the performance of government contracts and where dollar value of the Products exceed $10,000, the equal employment opportunity clauses in Executive Order 11246, VEVRAA, and 41 C.F.R. §§ 60-1.4(a), 60-741.5(a), and 60-250.4, are hereby incorporated. Contact info: Parker Hannifin Corporation Fluid System Connectors Division 300 Parker Drive Otsego, MI 49078 Phone: (269) 692-6555 Fax: (269) 694-4614 http://water.parker.com www.parker.com brass_custserv@parker.com CAT.3525LQ1